Specifications.
|
|
- Gyles Benson
- 5 years ago
- Views:
Transcription
1 is a 7 capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters. The is part of the PanelPilotACE range of compatible displays and panel meters. The low-profile display features a 7 capacitive touch screen and a dual-core ARM processor running embedded Linux. The display can be powered from a 5 to 3 d.c. supply and offers users a wealth of hardware interfaces which include four 6bit bi-polar analogue inputs (to a maximum of ±4 d.c.), eight digital input/output pins, two alarm outputs (maximum current sink 0mA) and four 8bit PWM outputs. Users program the display using the free PanelPilotACE Design Studio software which allows the creation of anything from simple meters and dials, through to advanced user interfaces with control elements. Specifications Display Touchscreen Resolution Processor Analogue Inputs Digital I/O Serial Buses Logged Data Interface Expansion Boards*** Memory Operating Temperature Supply 7 TFT with 6.7M colours Capacitive 024 x 600 px Freescale imx6xsolo (ARM Cortex 800MHz & Cortex 4 x ±4 or 4-20mA (6bit ADC with 0.05% ±mv typical accuracy*) 8 x DIO, 2 x open-collector alarm outputs, 4 x 8 bit PWM outputs RS232, RS485, SPI**, I2C** - USB connection to PC running Design Studio or Device Utility Software - FTP connection to Server PC over wired Ethernet CANbus 2Gbit DDR3 SDRAM and 2GB SD card 0 to 40 C (32 to 04 F) 5 to 3 d.c. (A typical at 5V d.c.) Outside Dimensions 86 x 22 x 2mm (7.3 x 4.8 x 0.8 ) * For measurement ranges up to ±. ** Not currently available in Design Studio. *** Available with Add-On Board. Issue 7 0/208 Page of 0
2 PanelPilotACE Design Studio Code-Free development for industrial display projects The PanelPilotACE Design Studio software provides a number of building blocks which allow users to drag-and-drop elements onto the screen to quickly create advanced display interfaces. From images to text elements, analogue style meters, touch screen navigation elements, logic statements, data logging, trend graphing and calculations, users can build up multi-screen interfaces without needing to write a line of code. There is a library of pre-defined elements such as meters, buttons and switches, and users can create their own content by combining elements or importing graphics in a number of formats (including jpg, png, tif, bmp and gif). The software includes support for transparency and multiple layers. Hardware interfacing is similarly intuitive, with hardware elements being dragged into a function builder where associations with graphical elements (such as a needle on a meter) can be defined. Here users can determine scaling for analogue inputs, define alarm triggers, behaviours for digital inputs and outputs and configure PWM outputs. PID Control: Use your display as a PID control unit. Set P, I and D coefficients, measure a process variable and use PanelPilotACE to correct to your desired set point. Easy Collection of Logged Data: Easily collect logged data by connecting the PanelPilotACE via USB to a PC running Design Studio or Device Utility Software, or connect to an FTP Server via wired Ethernet. Multi-Channel Data Logging: 0 logging channels allowing logging of any input to the device that can be defined numerically. Trend Graphs: Display data on graphs as it is logged. If you use an alarm threshold as one of your data channels, monitor logged data against alarm levels. Previewing and Uploading Projects: The software includes a Preview in Emulator function which emulates the hardware s inputs and outputs, allowing users to test their projects prior to upload. Projects are uploaded to the via a mini USB port. PanelPilotACE Design Studio is compatible with Windows 7, 8 and 0 and can be downloaded free from Issue 7 0/208 Page 2 of 0
3 Dimensions All dimensions are in mm (in) 85.6 (7.3) 78.7 (7.0) 8. (0.7) 22 (4.8) 5. (4.5) Panel Cut-Out and Fitting The panel cut-out is 80 x 7mm (7. x 4.57 ). The module can be mounted in panels between 0.5 and 4.0mm (0.0 and 0.5 ) in thickness. To do this take the four bracket clips supplied and use the screws to secure these to the mounting holes located on the rear of the module. Then place the module in the panel and tighten the grub screws located in each bracket to secure the module within the panel. Issue 7 0/208 Page 3 of 0
4 Pin Out TB: Power Inputs Terminal VIN Supply Voltage (V+) TB SK PL TB2 TB2: Analogue Inputs Terminal PL IN Analogue Input IN2 Analogue Input 2 : Analogue Inputs Terminal IN3 Analogue Input 3 IN4 Analogue Input 4 PL: Analogue Inputs Pin Number Analogue Input (IN) 2 3 Analogue Input 2 (IN2) 4 TB SK PL TB2 5 Analogue Input 3 (IN3) 6 PL 7 Analogue Input 4 (IN4) 8 : 4-20mA Current Loop Measurement Link Positions Pin Number mA current loop measurement (IN) when shorted mA current loop measurement (IN2) when shorted mA current loop measurement (IN3) when shorted mA current loop measurement (IN4) when shorted TB SK PL TB2 PL Issue 7 0/208 Page 4 of 0
5 Pin Out (continued...) : Alarms, Serial Input and Digital I/O Pin Number 2 Supply Voltage (V+) 3 Alarm (ALM) 4 Alarm 2 (ALM2) 5 I2C0 SCL 6 I2C0 SDA 7 SPI SS 8 SPI MOSI 9 SPI MISO 0 SPI SCK Digital I/O Channel (DIG) 2 Digital I/O Channel 2 (DIG2) 3 Digital I/O Channel 3 (DIG3) 4 Digital I/O Channel 4 (DIG4) 5 Digital I/O Channel 5 (DIG5) 6 Digital I/O Channel 6 (DIG6) 7 Digital I/O Channel 7 (DIG7) 8 Digital I/O Channel 8 (DIG8) 9 PWM Channel (PWM) 20 PWM Channel 2 (PWM2) 2 PWM Channel 3 (PWM3) 22 PWM Channel 4 (PWM4) SK TB PL TB2 PL 23 DUART TX (for internal use) 24 DUART RX (for internal use) 25 USB D+ 26 USB D- 27 I2C SDA (for internal use) 28 I2C SCL (for internal use) 29 +5V Output Voltage 30 High Speed ADC 3 +3V3 Output Voltage Shorted together to enable firmware upgrade : RS232 Interface Name TX RTS RX CTS Transmit Output Request to send Output Recieve Input Clear to send Input TB SK PL TB2 PL Issue 7 0/208 Page 5 of 0
6 Pin Out (continued...) : RS485 Interface Terminal A RS485 A Signal TB SK B RS485 B Signal PL TB2 PL : Factory Programming Interface (JTAG) TB SK PL TB2 PL Issue 7 0/208 Page 6 of 0
7 Various Operating Modes Supply Voltage Supply to the display module can be connected to either the screw terminals (TB) or pins () 5-3 d.c. V+ For best results, ensure the power supply is free from electrical noise. Supply Voltage Screw Terminals (TB) Pin () V+ VIN 2 Measuring an Analogue Voltage An analogue voltage can be connected to either the screw terminals (TB) or pins (PL). Analogue Input Screw Terminals Pin (PL) 5-3 d.c. V+ TB2 IN IN 2 2 IN2 IN d.c. IN 3 IN3 IN IN4 IN4 7 8 To minimise offsets it is best practice to connect analogue grounds directly to the meter pins (PL) or screw terminals (TB). The uses a programmable gain amplifier (PGA) together with a 6-bit analogue to digital converter (ADC) for its analogue voltage measurements. The PGA is automatically set when the analogue range of a channel is input into the PanelPilotACE Design Studio. Analogue Input Resolution ±.25V 0.04mV ±2.5V 0.08mV ±5V 0.6mV ± 0.33mV ±2 0.66mV ±4.3mV The table to the right shows the maximum resolution of the s analogue measurements across a number of voltage ranges. Issue 7 0/208 Page 7 of 0
8 Various Operating Modes (continued...) Measuring a 4-20mA Current The 4-20mA signal should be connected as for Measuring an Analogue Voltage but a jumper link should be placed across pins for each analogue channel being used: 4-20 ma 2-3 d.c. V+ Analogue Voltage Jumper link () IN & 2 IN2 3 & 4 IN3 5 & 6 IN4 7 & 8 IN Scaling: The sense resistors used are 0Ω. Therefore in software scaling 4mA equates to 0.44V and 20mA equates to 2.2V. Note: transmitter terminals (+ or -) must be isolated from the power supply Driving an Alarm Output The alarm outputs are open-collector. When an alarm is active, the output can sink up to 0mA. Alarm outputs are connected via : Alarm Output Pin () ALM 3 ALM2 4 V+ V+ R V+ - VLED 0mA R ILED ALM 0mA ALM 0mA Driving an LED using alarm output Driving a relay using alarm output Issue 7 0/208 Page 8 of 0
9 Various Operating Modes (continued...) Using Digital Input/Output Pins Digital inputs/outputs are connected via : VDD 3.3V Digital I/O Pin () DIG DIG2 2 DIG3 3 DIG4 4 DIG5 5 DIG6 6 DIG7 7 DIG8 8 DIG kω to 0kΩ Generating a digital input with a push button The characteristics of the digital I/O pins are as follows: Parameter Min Max Unit Input voltage (high) V Input voltage (low) V Output voltage (high) V Output voltage (low) V Output source current ma Output sink current ma VDD 3.3V Absolute Maximum ratings: DIG 0k Parameter Min Max Unit Input voltage relative to ground V Protection circuit for digital I/O For maximum flexibility in accommodating external add-on boards and interfacing to external circuits, the digital I/O pins connect directly to the microcontroller and do not contain any buffering or protection circuitry. Take care not to exceed the maximum ratings, otherwise the unit may be permanently damaged. If there is a risk that inputs may exceed these values, then voltage limiting must be used (example circuit above). Note that the protection diodes must be of the Schottky type and not regular silicon diodes. Issue 7 0/208 Page 9 of 0
10 Various Operating Modes (continued...) Using PWM Output If the is configured to have PWM output, it can be used to drive a buzzer or produce a simple digital-toanalogue converter. The PWM outputs are connected via : PWM Output Pin () PWM 9 PWM2 20 PWM3 2 PWM4 22 The characteristics of the PWM output pins are as follows: Parameter Min Max Unit Voltage V Output source current (PWM) ma Output sink current (PWM) ma PWM R PWM R Using PWM output to convert digital to analogue Using PWM output to drive a buzzer For more information on configuring your device, visit our YouTube channel for tutorials or the PanelPilot University ace-university Issue 7 0/208 Page 0 of 0
SGD 70-A 7 PanelPilotACE Compatible Display
is a 7 capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters. The is
More informationSGD 70-A 7 PanelPilotACE Compatible Display
is a 7 capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters. The is
More informationSGD 43-A 4.3 PanelPilotACE Compatible Display
is a 4.3 capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters. The
More informationSGD 43-A 4.3 PanelPilotACE Compatible Display
is a 4.3 capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters. The
More informationSeries SPPM2 Graphical User Interface Panel Meter. Specifications - Installation and Operating Instructions MINI USB PORT
Series SPPM Graphical User Interface Panel Meter Bulletin PCSPPM Specifications Installation and Operating Instructions / [9.0] 9/ [9.] / [9.9] / [.9] / [.] 9/ [9.] JTAG [FOR INTERNAL USE] ALARMS, SERIAL
More informationLED Driver 5 click. PID: MIKROE 3297 Weight: 25 g
LED Driver 5 click PID: MIKROE 3297 Weight: 25 g LED Driver 5 click is a Click board capable of driving an array of high-power LEDs with constant current, up to 1.5A. This Click board features the TPS54200,
More informationGAUSS High Power UHF Radio
[] Table of contents Table of contents... 1 1. Introduction... 3 Features... 4 Block Diagram... 6 2. Pinouts... 7 3. Absolute Maximum Ratings... 9 4. General Recommended Operating Conditions... 10 5. RF
More informationZKit-51-RD2, 8051 Development Kit
ZKit-51-RD2, 8051 Development Kit User Manual 1.1, June 2011 This work is licensed under the Creative Commons Attribution-Share Alike 2.5 India License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/2.5/in/
More informationRGB Driver click. PID: MIKROE 3078 Weight: 28 g
RGB Driver click PID: MIKROE 3078 Weight: 28 g RGB Driver click is an RGB LED driver, capable of driving RGB LED stripes, LED fixtures and other RGB LED applications that demand an increased amount of
More informationUSB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
More informationOcean Controls KT-5221 Modbus IO Module
Ocean Controls Modbus IO Module 8 Relay Outputs 4 Opto-Isolated Inputs 2 Analog Inputs (10 bit) 1 PWM Output (10 bit) 4 Input Counters Connections via Pluggable Screw Terminals 0-5V or 0-20mA Analog Inputs,
More informationLaserPING Rangefinder Module (#28041)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical:support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
More informationDesigning with STM32F3x
Designing with STM32F3x Course Description Designing with STM32F3x is a 3 days ST official course. The course provides all necessary theoretical and practical know-how for start developing platforms based
More informationSystem Board 6219 MAXREFDES89#: MAX14871 Full-Bridge DC Motor Driver MBED Shield
System Board 6219 MAXREFDES89#: MAX14871 Full-Bridge DC Motor Driver MBED Shield Introduction Brushed DC motors provide cost-effective, convenient motion in many applications ranging from electric toothbrushes
More informationMULTIFUNCTION GRAPHICAL UNIT MGU 800
MULTIFUNCTION GRAPHICAL UNIT MGU 800 For display, recording and evaluation of process instruments signals (level, temperature, pressure, etc.) 3.5" TFT display, multi-language menu Variety of possible
More informationAdvanced Ladder Logic Full IEC Languages 25A for <1 24 VDC DC Switched
EXL6 OCS Datasheet for HE- EXL1E0, HE- EXL1E2, HE- EXL1E3, HE- EXL1E4, HE- EXL1E5, HE- EXL1E6 HEXT371C100, HEXT371C112, HEXT371C113, HEXT371C114, HEXT371C115, HEXT371C116 1. Specifications Required Power
More information3.3V regulator. JA H-bridge. Doc: page 1 of 7
Cerebot Reference Manual Revision: February 9, 2009 Note: This document applies to REV B-E of the board. www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The
More informationPortable Multi-Channel Recorder Model DAS240-BAT
Data Sheet Portable Multi-Channel Recorder The DAS240-BAT measures parameters commonly found in process applications including voltage, temperature, current, resistance, frequency and pulse. It includes
More informationINSTRUCTION MANUAL MODEL 2779 SUBCARRIER MODULATOR
INSTRUCTION MANUAL MODEL 2779 SUBCARRIER MODULATOR Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., and may not be reproduced or duplicated in any form without
More informationRelay 3 Click. PID: MIKROE 3357 Weight: 42 g
Relay 3 Click PID: MIKROE 3357 Weight: 42 g Relay click 3 is a dual relay Click board, featuring two single-pole doublethrow relays which can be operated by output pins of the host microcontroller (MCU).
More informationDESCRIPTION DOCUMENT FOR WiFi <-> RS485 <-> LoRa DEVICE BOARD HARDWARE REVISION 0.1
DESCRIPTION DOCUMENT FOR WiFi RS485 LoRa DEVICE BOARD HARDWARE REVISION 0.1 Department Name Signature Date Author Reviewer Approver Revision History Rev Description of Change A Initial Release
More informationAC Current click PID: MIKROE Weight: 27 g
AC Current click PID: MIKROE-2523 Weight: 27 g AC Current click can measure alternating currents up to 30A and it features the MCP3201 ADC (analog to digital) converter and the MCP607 CMOS Op Amp, both
More informationLED Driver 4 click. PID: MIKROE 3037 Weight: 25 g
LED Driver 4 click PID: MIKROE 3037 Weight: 25 g LED Driver 4 click is a form of a high-efficiency boost converter that is ideally suited for driving an array of white LEDs. The driver has the ability
More informationActivity 4: Due before the lab during the week of Feb
Today's Plan Announcements: Lecture Test 2 programming in C Activity 4 Serial interfaces Analog output Driving external loads Motors: dc motors, stepper motors, servos Lecture Test Activity 4: Due before
More informationRS-232 Electrical Specifications and a Typical Connection
Maxim > Design Support > Technical Documents > Tutorials > Interface Circuits > APP 723 Keywords: RS-232, rs232, RS-422, rs422, RS-485, rs485, RS-232 port powered, RS-232 to RS-485 conversion, daisy chain,
More informationU2C-1SP4T-63H. Typical Applications
Solid state USB / I 2 C RF SP4T Switch 50Ω 2 to 6000 MHz The Big Deal USB and I 2 C power & control High speed ing (250 ns) High power handling (+30 dbm) Very High Isolation (80 db) Small case (3.75 x
More informationRS232-B1 User Manual V1.2 05/10/2017
RS232-B1 User Manual V1.2 05/10/2017 Table of Contents 1. Introduction...2 1.1 Device Overview... 2 1.2 System Overview... 3 1.3 Features... 3 1.4 Connectors... 4 1.4.1 RS232 Connectors (J1, J2)... 4 1.4.2
More informationINF8574 GENERAL DESCRIPTION
GENERAL DESCRIPTION The INF8574 is a silicon CMOS circuit. It provides general purpose remote I/O expansion for most microcontroller families via the two-line bidirectional bus (I 2 C). The device consists
More informationDEVKIT-S12ZVC QUICK START GUIDE (QSG)
DEVKIT-S12ZVC QUICK START GUIDE (QSG) ULTRA-RELIABLE MCUS FOR INDUSTRIAL AND AUTOMOTIVE EXTERNAL USE Get to know the DEVKIT-S12ZVC The DEVKIT-S12ZVC is an ultra-low-cost development platform for S12 Microcontrollers.
More informationUSB-B1 User Manual V1.1
USB-B1 User Manual V1.1 Table of Contents 1 Introduction... 2 1.1 Device Overview... 2 1.2 System Overview... 3 1.3 Connectors... 4 1.3.1 USB Connector J11... 4 1.3.2 External Antenna Connector (J10)...
More informationCortex-M3 based Prepaid System with Electricity Theft Control
Research Inventy: International Journal of Engineering And Science Vol.6, Issue 4 (April 2016), PP -139-146 Issn (e): 2278-4721, Issn (p):2319-6483, www.researchinventy.com Cortex-M3 based Prepaid System
More informationProcess Components. Process component
What are PROCESS COMPONENTS? Input Transducer Process component Output Transducer The input transducer circuits are connected to PROCESS COMPONENTS. These components control the action of the OUTPUT components
More informationCitrus Circuits Fall Workshop Series. Roborio and Sensors. Paul Ngo and Ellie Hass
Citrus Circuits Fall Workshop Series Roborio and Sensors Paul Ngo and Ellie Hass Introduction to Sensors Sensor: a device that detects or measures a physical property and records, indicates, or otherwise
More informationLaser & TEC Controller Laser Diode Driver with Integrated TEC Controller. OEM Laser Controller
OEM Laser Controller Input Characteristics: Features DC Input Voltage: 12 24 V Output Stage Laser Diode Driver: Laser diode (compliance) voltage: 14 V Current ranges: - up to 0.15 A - up to 0.5 A - up
More informationOEM QCL Controller. Quantum Cascade Laser Diode Driver with Integrated TEC Controller. Data Interfaces: Gbit Ethernet USB 2.
OEM Input Characteristics: Features DC Input Voltage: 12 24 V Output Stage Laser Diode Driver: Laser diode (compliance) voltage: 14 V Current: up to 1.5 A General Description: The contains a highly flexible,
More informationQuick Start Guide. TWR-SHIELD Shield Adapter Module for the Tower System TOWER SYSTEM
TWR-SHIELD Shield Adapter Module for the Tower System TOWER SYSTEM Get to Know the TWR-SHIELD Primary Elevator Shield Headers Power Regulation (5 V and 3.3 V) Advanced Configuration Options Arduino Shield
More informationOverview. Figure 2. Figure 1. Doc: page 1 of 5. Revision: July 24, Henley Court Pullman, WA (509) Voice and Fax
Programming Cable for Xilinx FPGAs Revision: July 24, 2012 1300 Henley Court Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The Joint Test Action Group (JTAG)-HS2 programming cable is a high-speed
More informationHAW-Arduino. Sensors and Arduino F. Schubert HAW - Arduino 1
HAW-Arduino Sensors and Arduino 14.10.2010 F. Schubert HAW - Arduino 1 Content of the USB-Stick PDF-File of this script Arduino-software Source-codes Helpful links 14.10.2010 HAW - Arduino 2 Report for
More informationRemote Site Monitoring
Remote Site Monitoring FEATURES AT A GLANCE Codan Radio Communications now offers Remote Site Monitoring options that provide live site information, giving you the power to respond intelligently to communications
More informationServo click. PID: MIKROE 3133 Weight: 32 g
Servo click PID: MIKROE 3133 Weight: 32 g Servo click is a 16-channel PWM servo driver with the voltage sensing circuitry. It can be used to simultaneously control 16 servo motors, each with its own programmable
More informationDual Bidirectional I 2 C-Bus and SMBus Voltage-Level Translator UM3212M8 MSOP8 UM3212DA DFN
Dual Bidirectional I 2 C-Bus and SMBus Voltage-Level Translator UM3212M8 MSOP8 UM3212DA DFN8 2.1 1.6 General Description The UM3212 is a dual bidirectional I 2 C-bus and SMBus voltage-level translator
More informationThermo Electric Cooling Temperature Controller TEC Controller / Peltier Driver ±16 A / ±19 V
Thermo Electric Cooling Temperature Controller TEC Controller / Peltier Driver ±16 A / ±19 V TEC-1090 OEM Precision TEC Controller DC Input Voltage: TEC Controller / Driver: Output Current: Output Voltage:
More informationColor TFT Liquid Crystal Display Module + Arduino Shield
NHD-4.3CTP-SHIELD-L Color TFT Liquid Crystal Display Module + Arduino Shield NHD- Newhaven Display 4.3-4.3 Diagonal CTP- Capacitive Touch Panel with Controller SHIELD- Arduino Shield L- Display: NHD-4.3-480272EF-ATXL#-CTP,
More informationConnecting Mains Electrical Power
Tide Level Monitoring Instrumentation The following documentation details the electrical installation for the tide level monitoring instrumentation and also a summary of the logger configurations required
More informationPROCESS & TEMPERATURE CONTROLLERS
PROCESS & TEMPERATURE CONTROLLERS NOVA PD54 Series Thermocouple, RTD, & Process Inputs High Accuracy Auto-Tuning PID Heating & Cooling Models Universal Power Supply 1-24 VAC Up to 3 Relays & 2 Analog Outputs
More informationRUDAT The Big Deal. Applications
USB / RS232 Programmable Attenuator 50Ω 0 110 db, 0.25 db step 1 to 6000 MHz The Big Deal Wide attenuation range, 110 db Fine attenuation resolution, 0.25 db Short attenuation transition time (650 ns)
More informationZKit-ARM-1769, ARM Dev. Kit
ZKitARM769, ARM Dev. Kit User Manual 0., May 03 ZKitARM769, ARM Dev. Kit User Manual Rev. 0. This work is licensed under the Creative Commons AttributionShare Alike.5 India License. To view a copy of this
More informationNTE1786 Integrated Circuit Frequency Lock Loop (FLL) Tuning & Control Circuit
NTE1786 Integrated Circuit Frequency Lock Loop (FLL) Tuning & Control Circuit Description: The NTE1786 is an integrated circuit in a 24 Lead DIP type package that provides closed loop digital tuning of
More informationData Acquisition Modules/ Distributed IO Modules
User Manual Data Acquisition Modules/ Distributed IO Modules Future Design Controls, Inc. 7524 West 98 th Place / P.O. Box 1196 Bridgeview, IL 60455 888.751.5444 - Office: 888.307.8014 - Fax 866.342.5332
More informationSpecifications and Interfaces
Specifications and Interfaces Crimson TNG is a wide band, high gain, direct conversion quadrature transceiver and signal processing platform. Using analogue and digital conversion, it is capable of processing
More informationEULAMBIA ADVANCED TECHNOLOGIES LTD. User Manual EAT-EOM-CTL-2. Alexandros Fragkos
EULAMBIA ADVANCED TECHNOLOGIES LTD User Manual Alexandros Fragkos (alexandros.fragkos@eulambia.com) 11/28/2016 28/11/2016 User Manual User Manual 28/11/2016 Electro-Optic Modulator Bias Control Unit v2.0
More informationCHAPTER 4 HARDWARE DEVELOPMENT OF STATCOM
74 CHAPTER 4 HARDWARE DEVELOPMENT OF STATCOM 4.1 LABORATARY SETUP OF STATCOM The laboratory setup of the STATCOM consists of the following hardware components: Three phase auto transformer used as a 3
More informationRev NGM EVO USER GUIDE
www.promax.it The information contained in this document are for informational purposes only and are subject to change without notice and should not be interpreted by any commitment by Promax srl. Promax
More informationSG2525A SG3525A REGULATING PULSE WIDTH MODULATORS
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL
More informationI2C Demonstration Board I 2 C-bus Protocol
I2C 2005-1 Demonstration Board I 2 C-bus Protocol Oct, 2006 I 2 C Introduction I ² C-bus = Inter-Integrated Circuit bus Bus developed by Philips in the early 80s Simple bi-directional 2-wire bus: serial
More informationOEM QCL Controller. Quantum Cascade Laser Diode Driver with Integrated TEC Controller. Data Interfaces: Gbit Ethernet USB 2.
OEM Input Characteristics: Features DC Input Voltage: 12 24 V Output Stage Laser Diode Driver: Laser diode (compliance) voltage: 14 V Current ranges: - up to 0.15 A - up to 0.5 A - up to 1.5 A General
More informationTouch Potentiometer Hookup Guide
Page 1 of 14 Touch Potentiometer Hookup Guide Introduction The Touch Potentiometer, or Touch Pot for short, is an intelligent, linear capacitive touch sensor that implements potentiometer functionality
More informationArduino Microcontroller Processing for Everyone!: Third Edition / Steven F. Barrett
Arduino Microcontroller Processing for Everyone!: Third Edition / Steven F. Barrett Anatomy of a Program Programs written for a microcontroller have a fairly repeatable format. Slight variations exist
More informationUM1082 User manual. The STPM10 single-phase meter evaluation boards. Introduction
UM08 User manual The STPM0 single-phase meter evaluation boards Introduction The STPM0 and STPM0 devices are energy meter ASSPs (application specific standard products), which address to a wide range of
More informationNote: Keep the impedance between the SMT2 and FPGA below 100 Ohms to operate the JTAG at maximum speed.
1300 Henley Court Pullman, WA 99163 509.334.6306 www.digilentinc.com JTAG-SMT2 Programming Module for Xilinx FPGAs Revised November 21, 2017 This manual applies to the JTAG-SMT2 rev. D Overview The Joint
More informationDATA SHEET. TDA8415 TV and VTR stereo/dual sound processor with integrated filters and I 2 C-bus control INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET TV and VTR stereo/dual sound processor with integrated filters and I 2 C-bus control File under Integrated Circuits, IC02 May 1989 with integrated filters and I 2 C-bus control
More informationThermo Electric Cooling Temperature Controller TEC Controller / Peltier Driver ±16 A / ±22 V or 31 V
Thermo Electric Cooling Temperature Controller TEC Controller / Peltier Driver ±16 A / ±22 V or 31 V OEM TEC Controller Features The is a specialized TEC controller / power supply able to precision-drive
More informationTRXQ1 RXQ1 FM NARROW BAND TRANSCEIVERS. RXQ1 Version. Applications. TRXQ1 Version
RF Transceiver or Intelligent Modem Versions Host Data Rate upto 19,200 Baud Data Rates to 20 K baud. 2 Selectable RF Channels Narrowband Crystal Controlled Optimal Range 200m Supply Voltage 3-5V Very
More informationRobotic Development Kit. Powered using ATMEL technology
Robotic Development Kit Powered using ATMEL technology Index 1. System overview 2. Technology overview 3. Individual dev-kit components I. Robot II. Remote III. IR-Pod IV. Base-Station V. RFID 4. Robonii
More informationRB01 Development Platform Hardware
Qualcomm Technologies, Inc. RB01 Development Platform Hardware User Guide 80-YA116-13 Rev. A February 3, 2017 Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
More informationACT111A. 4.8V to 30V Input, 1.5A LED Driver with Dimming Control GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION CIRCUIT
4.8V to 30V Input, 1.5A LED Driver with Dimming Control FEATURES Up to 92% Efficiency Wide 4.8V to 30V Input Voltage Range 100mV Low Feedback Voltage 1.5A High Output Capacity PWM Dimming 10kHz Maximum
More informationA Wireless Mesh IoT sensor system FEATURES DESCRIPTION. Vicotee Njord series Nodes
A Wireless Mesh IoT sensor system Vicotee Njord series Nodes FEATURES A SmartMesh IP network consists of a highly scalable self-forming multi-hop mesh of wireless nodes, known as motes, which collect and
More informationWIRING DIAGRAMS FOR SMART MODELS
SMART SERIES CODING SYSTEM FOR AV ACTUATOR WIRING DIAGRAMS There are 3 elements to the wiring codes used in AVA electric actuators: CONTROL WIRING CODE CONTROL WIRING TYPE 1 3 Wire system, single pole
More informationADVANCED EMBEDDED MONITORING SYSTEM FOR ELECTROMAGNETIC RADIATION
98 Chapter-5 ADVANCED EMBEDDED MONITORING SYSTEM FOR ELECTROMAGNETIC RADIATION 99 CHAPTER-5 Chapter 5: ADVANCED EMBEDDED MONITORING SYSTEM FOR ELECTROMAGNETIC RADIATION S.No Name of the Sub-Title Page
More informationFEATURES DESCRIPTION BENEFITS APPLICATIONS. Preliminary PT4501 Sub-1 GHz Wideband FSK Transceiver
Preliminary PT4501 Sub-1 GHz Wideband FSK Transceiver DESCRIPTION The PT4501 is a highly integrated wideband FSK multi-channel half-duplex transceiver operating in sub-1 GHz license-free ISM bands. The
More informationUSB4. Encoder Data Acquisition USB Device Page 1 of 8. Description. Features
USB4 Page 1 of 8 The USB4 is a data acquisition device designed to record data from 4 incremental encoders, 8 digital inputs and 4 analog input channels. In addition, the USB4 provides 8 digital outputs
More informationBV4112. Serial Micro stepping Motor Controller. Product specification. Dec V0.a. ByVac Page 1 of 18
Product specification Dec. 2012 V0.a ByVac Page 1 of 18 SV3 Relay Controller BV4111 Contents 1. Introduction...4 2. Features...4 3. Electrical interface...4 3.1. Serial interface...4 3.2. Motor Connector...4
More informationMTS2500 Synthesizer Pinout and Functions
MTS2500 Synthesizer Pinout and Functions This document describes the operating features, software interface information and pin-out of the high performance MTS2500 series of frequency synthesizers, from
More informationThis LPWAN WLRS-591EVB integrates WLRS-590 that provides ultra long range spread spectrum communication and high interference immunity.
series LoRa IoT Module Low Power Wide Area Network Solution This LPWAN integrates WLRS-590 that provides ultra long range spread spectrum communication and high interference immunity. The WLRS-590 is designed
More informationFeatures MIC2777 VDD /RST R2 GND. Manual Reset OTHER LOGIC. Typical Application
MIC2777 Dual Micro-Power Low Voltage Supervisor General Description The MIC2777 is a dual power supply supervisor that provides under-voltage monitoring, manual reset capability, and poweron reset generation
More informationThe Guitar Chord Learning System
The Guitar Chord Learning System Calvin A. Sessions Hardware Description April 19, 2005 Western Washington University Electronics Engineering Technology ETEC 474, Professor Morton INTRODUCTION The Guitar
More informationADT7350. General Description. Applications. Features. Typical Application Circuit. Aug / Rev. 0.
General Description The ADT7350 is a step-down converter with integrated switching MOSFET. It operates wide input supply voltage range from 4.5V to 24V with 1.2A peak output current. It includes current
More informationDSEM640. DSEControl PROGRAMMABLE CONTROLLER FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY
PROGRAMMABLE CONTROLLER FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY OVERVIEW DC SUPPLY 8 V DC to 36 V DC CURRENT CONSUMPTION OPERATING CURRENT < 300 ma at 24 V without external loads TOTAL INPUTS/OUTPUTS
More informationOVEN INDUSTRIES, INC. Model 5C7-362
OVEN INDUSTRIES, INC. OPERATING MANUAL Model 5C7-362 THERMOELECTRIC MODULE TEMPERATURE CONTROLLER TABLE OF CONTENTS Features... 1 Description... 2 Block Diagram... 3 RS232 Communications Connections...
More informationTarocco Closed Loop Motor Controller
Contents Safety Information... 3 Overview... 4 Features... 4 SoC for Closed Loop Control... 4 Gate Driver... 5 MOSFETs in H Bridge Configuration... 5 Device Characteristics... 6 Installation... 7 Motor
More informationINSTANT ROBOT SHIELD (AXE408)
INSTANT ROBOT SHIELD (AXE408) 1.0 Introduction Thank you for purchasing this Instant Robot shield. This datasheet is designed to give a brief introduction to how the shield is assembled, used and configured.
More informationLab 2: Blinkie Lab. Objectives. Materials. Theory
Lab 2: Blinkie Lab Objectives This lab introduces the Arduino Uno as students will need to use the Arduino to control their final robot. Students will build a basic circuit on their prototyping board and
More informationDatasheet. Octadrive DSP-CN * Applies to Part Number: *This unit has a CobraNet interface installed
OCTADRIVE DSP-CN Datasheet Applies to Part Number: 391030 Octadrive DSP-CN * *This unit has a CobraNet interface installed User Notice: No part of this document including the software described in it may
More informationDNT2400. Low Cost 2.4 GHz FHSS Transceiver Module with I/O
2.4 GHz Frequency Hopping Spread Spectrum Transceiver Point-to-point, Point-to-multipoint, Peer-to-peer and Tree-routing Networks Transmitter Power Configurable from 1 to 63 mw RF Data Rate Configurable
More informationFeatures MIC2776L /MR GND
MIC2776 Micro-Power Low Voltage Supervisor Micrel, Inc. General Description The MIC2776 is a power supply supervisor which provides under-voltage monitoring and power-on reset generation in a compact 5-pin
More information40V Boost Converter for LED driver / TFT Bias / USB Power
40V Boost Converter for LED driver / TFT Bias / USB Power DESCRIPTION The is a high efficiency step-up converter with an internally integrated 40V power MOSEFT. It runs with an optimal 0.8MHz frequency
More informationArbStudio Arbitrary Waveform Generators
ArbStudio Arbitrary Waveform Generators Key Features Outstanding performance with 16-bit, 1 GS/s sample rate and 2 Mpts/Ch 2 and 4 channel models Digital pattern generator PWM mode Sweep and burst modes
More informationVacuum Tubes. BJT or FET. Transistor Configurations. Depends on application Amplifiers
Vacuum Tubes 3 Handouts Lab 3 (2) Lecture notes Linear without feedback Characteristics independent of temperature Wider dynamic range Vacuum Tubes, BJT or FET? Circuit Analysis: Amplifier & Feedback Classic
More informationUSB/RS232 Variable Attenuator
USB/RS3 Variable Attenuator 5Ω.1 db step, -3 MHz The Big Deal Very fine attenuation resolution (.1 db) Glitchless transitions ( db glitch) USB and RS3 control Applications Signal level calibration Gain
More informationWaveStation Function/Arbitrary Waveform Generators
WaveStation Function/Arbitrary Waveform Generators Key Features High performance with 14-bit, 125 MS/s and 16 kpts 2 channels on all models Large 3.5 color display for easy waveform preview Over 40 built-in
More informationWaveStation Function/Arbitrary Waveform Generators
WaveStation Function/Arbitrary Waveform Generators Key Features High performance with 14-bit, 125 MS/s and 16 kpts 2 channels on all models Large 3.5 color display for easy waveform preview Over 40 built-in
More informationParallel Input/Output. Microcomputer Architecture and Interfacing Colorado School of Mines Professor William Hoff
Parallel Input/Output 1 Parallel Input/Output Ports A HCS12 device may have from 48 to 144 pins arranged in 3 to 12 I/O Ports An I/O pin can be configured for input or output An I/O pin usually serves
More informationModel 2450 Interactive SourceMeter Instrument
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com Model 2450 Interactive Meter Instrument Specifications SPECIFICATION CONDITIONS This document contains
More informationUNISONIC TECHNOLOGIES CO., LTD
U UNISONIC TECHNOLOGIES CO., LTD REGULATING PWM IC DESCRIPTION The UTC U is a pulse width modulator IC and designed for switching power supplies application to improve performance and reduce external parts
More informationUsing a Rad Hard Switching Regulator as a VTT Terminator in DDR Applications
White Paper Using a Rad Hard Switching Regulator as a VTT Terminator in DDR Applications Introduction DDR memory is becoming increasingly popular in satellite and space applications. Currently, however,
More informationFeatures. Applications
HFBR-8 Series HFBR-8 Transmitter HFBR-8 Receiver Megabaud Versatile Link Fiber Optic Transmitter and Receiver for mm POF and µm HCS Data Sheet Description The HFBR-8 Series consists of a fiber-optic transmitter
More informationPI6ULS5V9509 Level Translating I 2 C-Bus/SMBus Repeater with Tiny Package
Features Bidirectional buffer isolates capacitance and allows 400 pf on port B of the device Port A operating supply voltage range of 1.1 V to V CC(B) - 1.0V Port B operating supply voltage range of 2.5
More informationSerial Communications RS232, RS485, RS422
Technical Brief AN236 Technical Brief AN236Rev A Serial Communications RS232, RS485, RS422 By John Sonnenberg S u m m a r y Electronic communications is all about interlinking circuits (processors or other
More informationHigh Efficiency AC Input 12A 12V Laser Driver
Figure. Front View of the Figure 2. Top View of the FEATURES High efficiency: 70 % Maximum output current: 2A Wide output voltage: 0V ~ 2V Wide input voltage: 00VAC ~ 240VAC High speed digital modulation:
More informationDMP Electronics Inc Robotic Division
DMP Electronics Inc Robotic Division Jul 2009 Agenda DMP SoC Family RB-100 Overview Hardware Introduction Accessory Support List Application Q & A DMP s ssoc Family Jul. 1998 Feb. 2007 386 40MHz 486 300MHz
More information