SPECIFICATION FOR APPROVAL INDEX
|
|
|
- Dinah Williams
- 5 years ago
- Views:
Transcription
1 SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 1 PRODUCT DETAIL 2-3 REEL DIMENSIONS 4 REEL PACKAGING QUANTITY 4 RELIABILITY AND TEST CONDITION.. 5 RECOMMENDED SOLDERING CONDITIONS...6
2 Part : SG SERIES Version : AG Page : 1 / 6 SHAPES AND DIMENSIONS: Unit: mm (inches) Type A B C(max) D E a ref b ref c ref SG5020 SG6020 SG ± ± ± ± (0.197±0.008) (0.197±0.008) (0.083) (0.079±0.012) (0.059±0.012 (0.071) (0.055) (0.205) 6.0± ± ±0.4 ) 1.7± (0.236±0.008) (0.236±0.008) (0.083) (0.102±0.016) (0.067±0.012 (0.079) (0.079) (0.244) 6.0± ± ±0.4 ) 1.7± (0.236±0.008) (0.236±0.008) (0.11) (0.102±0.016) (0.067±0.012 (0.079) (0.079) (0.244) ) PART NUMBER CODE SG R0 M A Series Name 2. Dimensions and shape 3. Inductance (R=Decimal Point) :1R0 for 1.0uH. 4. Inductance Tolerance: M + 20% ; N + 30% 5. A:Lead free.
3 Part : SG SERIES Version : AG Page : 2 / 6 SMD INDUCTOR FOR POWER LINE SG5020 TYPE Part Number Inductance DCR max Isat typ Irms typ SG5020-1R0MA 1.0uH±20% 20.0mΩ 6.0Amps 6.0Amps SG5020-1R5MA 1.5uH±20% 26.0mΩ 5.4Amps 5.4Amps SG5020-2R2MA 2.2uH±20% 42.0mΩ 4.1Amps 4.1Amps SG5020-3R3MA 3.3uH±20% 55.0mΩ 3.4Amps 3.5Amps SG5020-3R9MA 3.9uH±20% 65.0mΩ 3.2Amps 3.2Amps SG5020-4R7MA 4.7uH±20% 70.0mΩ 3.0Amps 3.0Amps SG5020-6R8MA 6.8uH±20% 105.0mΩ 2.5Amps 2.5Amps SG MA 10uH±20% 144.0mΩ 2.0Amps 2.0Amps SG MA 15uH±20% 230.0mΩ 1.6Amps 1.6Amps SG MA 22uH±20% 300.0mΩ 1.3Amps 1.3Amps 1. Inductance is measured at 100KHz and 1.0Vrms. 2. The nominal DCR is measured at 25 ambient temperature.. 3. Isat:The current will cause initial inductance value approximately 20% roll off at 25 ambient temperature. 4. Irms:The current will cause temperature rise approximate 40 C without core loss. 5. Operating Temperature: -25 ~ +125.
4 Part : SG SERIES Version : AG Page : 3 / 6 SMD INDUCTOR FOR POWER LINE SG6020 TYPE Part Number Inductance DCR max Isat typ Irms typ SG6020-1R0MA 1.0uH±20% 22.0mΩ 6.5Amps 4.5Amps SG6020-1R5MA 1.5uH±20% 29.0mΩ 6.0Amps 4.2Amps SG6020-2R2MA 2.2uH±20% 39.0mΩ 4.5Amps 3.9Amps SG6020-3R3MA 3.3uH±20% 47.0mΩ 4.1Amps 3.6Amps SG6020-4R7MA 4.7uH±20% 69.0mΩ 3.2Amps 3.0Amps SG6020-6R8MA 6.8uH±20% 96.0mΩ 2.8Amps 2.7Amps SG MA 10uH±20% 140.0mΩ 2.3Amps 2.1Amps SG MA 22uH±20% 330.0mΩ 1.5Amps 1.4Amps SG MA 33uH±20% 450.0mΩ 1.2Amps 1.0Amps SG MA 47uH±20% 650.0mΩ 1.05Amps 0.9Amps 1. Inductance is measured at 100KHz and 1.0Vrms. 2. The nominal DCR is measured at 25 ambient temperature.. 3. Isat:The current will cause initial inductance value approximately 20% roll off at 25 ambient temperature. 4. Irms:The current will cause temperature rise approximate 40 C without core loss. 5. Operating Temperature: -25 ~ SMD INDUCTOR FOR POWER LINE SG6028 TYPE Part Number Inductance DCR max Isat typ Irms typ SG6028-2R2MA 2.2uH±20% 25 mω 5.2 Amps 5.4 Amps SG6028-3R0MA 3.0uH±20% 32 mω 4.0 Amps 4.8 Amps SG6028-4R7MA 4.7uH±20% 40 mω 3.5 Amps 3.9 Amps SG6028-6R0MA 6.0uH±20% 47 mω 3.2 Amps 3.6 Amps SG MA 10uH±20% 75 mω 2.4 Amps 2.7 Amps SG MA 15uH±20% 118 mω 2.0 Amps 2.2 Amps SG MA 22uH±20% 161mΩ 1.7 Amps 1.8 Amps SG MA 33uH±20% 235 mω 1.4 Amps 1.6 Amps SG MA 47uH±20% 342 mω 1.2 Amps 1.4 Amps SG MA 68uH±20% 420 mω 0.96 Amps 1.0 Amps SG MA 100uH±20% 692 mω 0.72 Amps 0.8 Amps 1. Inductance is measured at 100KHz and 1.0Vrms. 2. The nominal DCR is measured at 25 ambient temperature.. 3. Isat:The current will cause initial inductance value approximately 20% roll off at 25 ambient temperature. 4. Irms:The current will cause temperature rise approximate 40 C without core loss. 5. Operating Temperature: -25 ~ +125.
5 Part : SG SERIES Version : AG Page : 4 / 6 REEL DIMENSIONS Unit:mm REEL PACKAGING QUANTITY TYPE W P REEL SIZE PCS / REEL SG mm (13 ) 3000 SG mm (13 ) 2000 SG mm (13 ) 1500
6 Part : SG SERIES Version : AG Page : 5 / 6 RELIABILITY AND TEST CONDITION Item ( 項目 ) Required Characteristics ( 要求 ) Test Method/Condition ( 測試方法 ) Solderability More than 90% of the terminal electrode should be covered with solder. Resistance to soldering heat High temperature resistance After 500 hours in 125±5 and 2 hour drying under normal condition. Low temperature storage After 500 hours in -25±5 and 2 hour drying under normal condition. Thermal shock After 10 cycles of following condition: Step Temperature ( ) Times (min.) 1-25± Room Temperature Within ± Room Temperature Within 3. Humidity Resistance After 500 hours in 40±2 and 90 to 95% humidity, and 2 hour drying under normal condition. Vibration Inductance within ±5% of initial value and appearance shall not break. After vibration for 1hour, In each of three orientations at sweep vibration (10~55~10Hz) with 1.52mm P-P Amplitudes.
7 Part : SG SERIES Version : AG Page : 6 / 6 RECOMMENDED SOLDERING CONDITIONS Recommended Reflow Pattern (Please use this product by reflow soldering) Reflow: until two times Iron Soldering GENERAL TECHNICAL DATA Operating temperature range: -25 ~ +125 Storage condition: (1) Temperature and humidity conditions: Less than 25±5 and 70% RH Max. (2) Recommended products should be used within 6 months from the time of delivery. (3) The packaging material should be kept where no chlorine or sulfur exists in the air.
SMT Ferrite Chip Inductor SFI201212S Series
Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated
Shielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
Kun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
Kun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
Cal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
Power Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
YAGEO CORPORATION SMD INDUCTOR / BEADS
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design
ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
MICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
High. FXL1350-XXX-M Power Choke R 0 1 / 9. Page : Applications. material. Powder iron core. Frequency range. up to 5MHz RoHS compliant.
1 / 9 High Current, Power Inductors FXL135-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 13.8x19x 5.mmm maximum surface mount package Powder iron core material Magnetically
ITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :
ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
Shielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110808V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110812V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
Thin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
Power Inductor MHCC/MHCI Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering MHCI 42-1R M - R8AU Series Name Dimensions Code Inductance (mm) (uh) Tolerance Internal Code 412 4.1x4.6x1.2 R22.22 M ±2% R8AU 42B 4.2x4.7x2.
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI- 700705- R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
FP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
SMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
CHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
HCM1103 High current power inductors
Supersedes June 2012 Applications Product features 11.5 x 10.3 x 3.0 mm maximum surface mount package Iron powder core material Magnetically shielded, low EMI High current carrying capacity, low core losses
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
Applications TPI L 180 N. Series Size Code Inductor Inductance Code nh Core Material TPI
Overview The KEMET TPI ferrite core inductors are designed for a very low core loss and its flat wire 1 turn through the construction design enables very high efficiency at large currents. The core material
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100808 - R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
SRR6038 Series - Shielded SMD Power Inductors
*RoHS COMPLIANT Features Height of. mm max. Current rating up to. A RoHS compliant* Applications Input/output of DC/DC converters Power supplies for: Portable communication equipment Camcorders LCD TVs
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 104R - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
Type CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
DCR DCR. Irms Isat. Max. Typ. Recommended Layout 5.2 (.205) 2.2 (.087) NATURAL COOLING
*RoHS COMPLIANT & AEC APPROVED R7 Features Shielded construction Carbonyl powder core High saturation current Low profile - 1. mm Inductance range:.1 to 1 µh AEC-Q qualified RoHS compliant* and halogen
SRP1038A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT 131 Features Shielded construction Carbonyl powder core High saturation current Inductance range:. to 7 µh AEC-Q compliant RoHS compliant* and halogen free** SRP13A Series - Shielded
SMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MNR - 4010-4R7 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]
![Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]](/thumbs/89/98622962.jpg "Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]")
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2018.
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCH - 5750C - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
Product Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
Power Inductor SCD Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering SCD 321 T - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 321 3.3x3.x2.1 R47.47 K ±1% 43 4.5x4.x3.2 1R 1.
Low profile metalized shielded drum core power inductors
Technical Data PM43 Supersedes March 7 pplications Digital cameras Media players Mobile phones Hand held equipment PCMCI cards GPS systems Product features Six sizes of shielded drum core inductors with
Type RN73 Series. Thin Film Precision Resistors. Electrical Characteristics. Key Features. Applications
Type RN73 Series Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Terminal finish electroplated 100% matte Sn Applications Communications Industrial Controls
Chip Beads & Inductors
Chip Beads & Inductors Introduction Chip Components Guide SAMWHA s CB, CBA,CM, CD series of chip components consist of compact, high performance beads and inductors. Their innovative components and case
Commom Mode Choke CUW Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering CUW 43 T - T - AU Series Name Dimensions Code Inductance Category (mm) (uh) Tolerance 43 4.5x3.2x2.6 T 51 T ±30% M 100 Internal Code Recommend
CHIP FERRITE BEADS ARRAY
CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single
FrelTec GmbH. Wire Wound SMD Power Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/20 GmbH www.freltec.com SPECIFICATION Part Number 194 303010 * H * 151 * J * E02 _ Type Size Feature Type Value Toleranc e Packing Optio nal
Technical Data Sheet 0603 Package Chip LED (0.8mm Height)
Technical Data Sheet 0603 Package Chip LED (0.8mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Notice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For High Quality and/or Reliability Equipment (Automotive / Industrial Equipment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information
SMD High Power Precision Resistors. Type RP73 Series
Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications Industrial
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
HCP0704 High current power inductors
Supersedes February 009 pplications Voltage Regulator Module (VRM) Multi-phase regulators Desktop and servers Base station equipment Notebook and laptop regulators Data networking and storage systems Point-of-load
FP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]
![Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]](/thumbs/90/101820522.jpg "Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]")
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2018.
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein
DRA Series High Power Density, High Efficiency, Shielded Inductors. Magnetics Solutions For Automotive Applications
For utomotive pplications Description 65 C maximum total temperature operation Five sizes of utomotive grade shielded drum core inductors Inductance range from.8uh to uh Current range up to 56 mps Mechanical
ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
Notice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
MPLCH 0740 L 1R0. Series Size Code Inductor Inductance Code µh MPLCH
Overview The KEMET MPLCH metal composite inductors are ideal for use in DC to DC switching power supplies. The combination of composite core material and round wire allow these inductors to provide high
Approval sheet. WQCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-Q200. *Contents in this sheet are subject to change without prior notice.
WCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-200 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V4.0_Auto Jun. 2017 FEATURES 1. Ceramic structure
Wire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
Thin Film Precision Chip Resistor (AR Series)
Features Advanced thin film technology Very tight tolerance down to ±0.01% Extremely low down to ±5PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Thin Film Precision Chip Resistor
FP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
SMD High Power Precision Resistors. Type RP73 Series
Type RP73 Series Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications
Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications
Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for
FrelTec GmbH. Multilayer Ferrite Chip Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/17 GmbH www.freltec.com SPECIFICATION Part Number 197 05 * 151 * S * J * E02 Type Size Value Material Toleranc e Packing 197 : SMD Multilayer
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet 0805 Package Chip LED (1.0mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type
CP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
discontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
Noise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC
Power Choke Coil (Automotive Grade) Series: PCC-M8M-LE(MC) PCC-M78M-LE(MC) High heat resistance and high reliability Using metal composite core (MC) Industrial Property : patents 3 (Registered /Pending
Thin Film Ultra Precision Resistors
Type RU73 Series Key Features High precision - TCR 2ppm/ C and 3ppm/ C Tolerance down to 0.01% Thin film (nichrome) Available in standard and high power versions Terminal finish electroplated 100% matte
SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000
![SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000](/thumbs/89/100532504.jpg "SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000")
Sunlord Specifications for Wire Wound SMD Power Inductor Page 1 of 11 SPECIFICATIONS Customer Product Name Sunlord Part Number Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number [ New
discontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
Applications MPLCV 0645 L 100. Series Size Code Inductor Inductance Code µh MPLCV
Overview he KEME MPLCV metal composite inductors are ideal for use in DC to DC switching power supplies for automotive applications. he combination of composite core material and round wire allows these
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet EVERLIGHT ELECTRONICS CO.,LTD. 1206 Package Chip LED(1.0mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared
Notice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
HCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
November Inductors for power circuits. Wound metal. SPM series. SPM10040 type SPM10040
I N D U C T O R S November 2017 Inductors for power circuits Wound metal SPM series SPM10040 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
February Inductors for power circuits. Wound metal. SPM series. SPM5030 type SPM5030
I N D U C T O R S February 2018 Inductors for power circuits Wound metal SPM series SPM5030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
Application. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers
Thin Film Chip Resistor TR Series Application Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers Features Tight tolerance from ±1%,±5%
May Inductors for Power Circuits. Wound Metal. SPM Series. SPM6530 Type SPM6530
I N D U C T O R S May 2017 Inductors for Power Circuits Wound Metal SPM Series SPM6530 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
LR Series. Construction. Application. Features
Metal Alloy Low-Resistance Resistor LR Series Construction Application Power supply Battery pack DIY tools Inverter/Converter (AC/DC, DC/DC, DC/AC) Measurable instrument Consumer electronics Note book
January Inductors for power circuits. Wound metal. SPM-HZ series (for automotive) SPM6530-HZ type SPM6530-HZ
I N D U C T O R S January 2018 Inductors for power circuits Wound metal SPM-HZ series (for automotive) SPM6530-HZ (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
HCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
Compact Flat Size Relay for Automotive. (Unit: mm inch)
Compact Flat Size Relay for Automotive CP RELAYS Sealed 13.1.1 9..374 13.1.1 1..413 FEATURES Compact flat type PC board terminal type: 9. mm.374 inch Compact and High
March Inductors for power circuits. Wound ferrite. CLF-NI-D series. CLF12577NI-D type CLF12577NI-D
I N D U C T O R S March 2017 Inductors for power circuits Wound ferrite CLF-NI-D series CLF12577NI-D (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
Chip Beads & Inductors
Introduction SAMWHA s CB, CBA, CM, CPI series of chip components consist of compact, high performance beads and inductors. Their innovative components and case structures mean low DC resistance and outstanding
Technical Data Sheet Chip LED with Right Angle Lens
Technical Data Sheet Chip LED with Right Angle Lens Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder
August Inductors for power circuits. Wound metal. SPM-LR series. SPM5015-LR type SPM5015-LR
I N D U C T O R S August 2017 Inductors for power circuits Wound metal SPM-LR series SPM5015-LR (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
20 AMP POWER RELAY HG RELAYS. a HG HG HG Unit weight. Ex. HG 2 AC 240 V
20 AMP POWER RELAY HG RELAYS a 3 1.4 5 RoHS Directive compatibility information http://www.nais-e.com/ a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A 250 V AC resistive and 1.5 kw 3 phase 220 V AC motor