Falcon. B Series - Dane Design FUNCTIONS ANSI. Options 2 3/8 Bacsket Specify A57420 (SL), A57620 (PL), A57420D (DL) 5065 T Strike

Transcription

1 B Series - Dane Design Falcon With Schlage C Keyway With I.C. Less Core Door Thickness 1-3/8 to 2 standard. Backset 2-3/4 BS standard, available 2-3/8 BS. Specifications Trim has heavy duty springs for lever return. Trim is through-bolted with screws coated with thread sealant to provide strength & resistance to loosening. Keyways Available Schlage C or I.C. less core. Trim Roses are 3-1/2 diameter Strike 4-7/8 x 1-1/4 ANSI strike standard ANSI / BHMA A156.2, series 4000 grade 2 UL 1-1/2 hour B label FUNCTIONS ANSI Options 2 3/8 Bacsket Specify A57420 (SL), A57620 (PL), A57420D (DL) 5065 T Strike Finish 626 B101 Schlage C Keyway B301 Schlage C Keyway B511 Schlage C Keyway or Best prep I. C. core less core B581 Schlage C Keyway or Best prep I. C. core less core 03/11 American Building Supply, Inc. 1

2 D200 - Series ABS-American Building Supply, INC. Falcon The new D Series deadbolt from Falcon will fit on virtually any door, thanks to an adjustable backset with an innovative lock-in-place design. Available in a Grade 1 or Grade 2 configuration, our new D Series deadbolt can be fitted with virtually any Falcon cylinder, enhances lock strength on the jamb side of the door and is easier to install than any deadbolt you ve ever worked with. Heavy duty* saw-resistant bolt with spinning hardened steel pin inside for additional protection * Grade 1 - High Strength Steel Grade 2 - Zinc Integrated anti-pry shield behind cylinder assembly for added security and quicker installation Latch tube construction Integrated trim design fewer pieces out of the box and improved installation time Security strike on jamb has third screw for deeper anchoring ADA compliant thumbturn Accepts all small format interchangable style cores (SFIC) and conventional cylinders Improved security strike design Added space inside strike box for true deadlatch Adjustable backset with lock-in-place design for greater versatility Tapered front resists wrenching Certification Deadbolt Strike Door Range Reinforcement Trim Ring Backset Grade 1 BHMA - ANSI A156.5, 2001, Grade 1 auxiliary lock, Available UL Listed for 3-Hour fire door Grade 2 BHMA - ANSI A156.5, 2001, Grade 2 auxiliary lock, Available UL Listed for 3-Hour fire door 1-1/8 x 2-1/4, Square corner faceplate, 1 housing diameter, 1 throw 1-1/8 x 2-3/4, lipless, with box 1-3/8-1-3/4 standard Metal dust box reinforcer with three - 3 screws 1 Wrought brass or bronze, reinforced with security insert 2-3/8 and 2-3/4 adjustable D231 Double Cylinder Deadbolt thrown or retracted by key from either side. Bolt automatically deadlocks when fully thrown. D241 Single Cylinder x Turn Deadbolt thrown or retracted by key or by turn. Bolt automatically deadlocks when fully thrown. D271 Thumbturn x Occupancy Indicator Deadbolt thrown or retracted by turn unit only. Occupancy indicator on outside (reads either in use or vacant with color coding). Bolt automatically deadlocks when fully thrown. Finish Keyway...Schlage C, I.C. Core less Core 2 American Building Supply, Inc. 03/11 Finish...613, 626 Keyway...Schlage C, I.C. Core less Core Finish...613, 626 Indicator Key

3 MA - Series Door thickness: Standard accommodates thickness of 1-3/4 to 2-1/4. Backset: 2-3/4 only. Case: Cold formed steel, zinc dichromate plated,.090 thick. Optional lead wrapping available. Hubs: Hardened steel. Handing: Right hand is standard; left hand optional. Reversible in the field. Cylinders: Furnished with Schlage C key way. IC cylinders available as an option Bind Resistant Trim: Heavy-duty through-bolted inserts clamp the trim on the door assuring proper alignment. Designed to bottom out on 1-3/4 doors to prevent door collapse. Provided with screws for strength and thread sealant to prevent loosening. Latch Bolt: Two-piece brass, mechanical anti-friction bolt. 3/4 projection. Dead Bolt: 1 throw, brass with a 1/4 thick hardened steel, freeturning, saw-resistant roller. Faceplates: (Armored Front) 1-1/4 x 8 brass, bronze and stainless steel adjustable for door bevel. Reinforced by heavy gauge steel with stabilizing ribs. Strike: Brass, bronze or stainless steel. Meets ANSI AII5.1 for frame preparation. Strike is handed. Optional 1-1/8 lip-to-center reversible flat lip available. ANSI/BHMA: Meets ANSI/BHMA , Series UL: 3 hour A label. Warranty: 1 Year Limited ABS-American Building Supply, INC. Falcon - Heavy Duty Levers DESIGNS DN Dane-Napa Finish: /4 2-1/2" 4-1/2 2-3/8" 2 9 /16" 2-9/16 3" QG Quantum-Gala 4-3/4" / /16" 2-1/2" /2" 4 1 DG Dane-Gala 03/11 American Building Supply, Inc. 3

4 Falcon - Heavy Duty Levers MA - Series FUNCTIONS MA101 M101 Passage/Closet Latchset Latch bolt by knobs/levers at all times. ANSI F01-1 F01-2 MA311 M311 Privacy, Bedroom or Bath Lock Latch bolt by knobs/levers. Dead bolt by turn from inside and emergency key ( ) outside furnished with lock. Rotating inside knob/lever retracts both bolts. F19-1 F19-2 MA531 M531 MA561 M561 Entry/Office Lock Latch bolt by knobs/levers except when outside knob/lever is made inoperative by buttons in face. Dead bolt by key outside and turn inside. Rotating inside knob/lever retracts both bolts. Deadlocking latch. Classroom Lock Deadlocking latch bolt by knobs/levers. Outside knob/lever locked by key outside. Inside knob/lever always free. F10-1, F10-2 F12-1, F12-2 F20-1, F20-2 MA581 M581 Storeroom Lock/Exit Lock Deadlocking latch bolt by inside knob/lever or key outside. Outside knob/lever rigid. F07-1 F07-2 Cylinder Guards A08790/ A / / / finish A08790 A08794 Cylinder Guard Application Chart** Door Thickness /8 (cyl.) /4 (cyl.) /8 (cyl.) /2 (cyl.) 1-1/2 A (13/32 ) A (17/32 ) 1-3/4 A (9/32 ) A (13/32 ) A (17/32 ) 2 A (9/32 ) A (13/32 ) A (17/32 ) 2-1/4 A (9/32 ) A (13/32 ) 2-1/2 A (9/32 ) Note: Dimensions listed for A08794 also apply to A ** Cylinder guards measure 3/16 from shoulder to top. A wavy spring washer is furnished with either cylinder guard. ** Single cylinder functions. 4 American Building Supply, Inc. 03/11

5 T - Series Falcon - Heavy Duty Levers Door Thickness: 1-3/4 to 2-1/8 standard. Thin door adapter kit (A ) available for doors thinner than 1-3/4, please specify door thickness. Special Order Backset: 2-3/4 standard. 2-3/8 also available. Link (A ) available for 5 backset. 5 backset Special Order Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Brass or cold-formed steel construction, zinc plated and dichromated for rust resistance Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Furnished with Schlage C keyway and IC prep options. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers no inserts) material finished to match mating parts. Latches: 9/16 bolt projection, UL listed with latch faceplates 2-1/4 x 1-1/8 with square corners standard. 3/4 projection, UL listed latch with 2-3/4 backset also available. Adjustable front standard. Strikes: 4-7/8 x 1-1/4 ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 24 VDC.185 AMP. ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1. UL: 3 hour A label. Warranty: 1 Year Limited Proven compression spring design supports levers, eliminating lever sag and provides years of reliable service 2-3/4 Heavy wrought brass or bronze roses over steel through-bolted rose inserts 5/16 Dia. thru hole 5/32 x 1/8 Deep 2-25/32 Elevation PressureRelease outside lever disengages when locked to protect internal mechanisms 2-3/8, 2-3/4 2-1/8 Dia. Backs 5/32 Design... Dane, Quantum Finish , (613 Dane SCH C Only) Keyway... Schlage C, (IC Except 581) Backset /4 Standard, also available 2-3/8 03/11 American Building Supply, Inc. 5

6 T - Series DESIGNS Falcon - Heavy Duty Levers 5 3-1/2 D Dane 3-1/ /2 Q Quantum 3-1/4 FUNCTIONS ANSI T101 Passage/Closet Latchset Latch bolt by levers at all times. F75-1 T301 Privacy Lock Latch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever or closing door releases push button. Emergency release in outside lever unlocks door. F76-1 T511 Entry/Office Lock Turn/push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push button locking. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever always free. Deadlocking latch bolt. F109-1 T581 Storeroom Lock Deadlocking latch bolt by lever inside or key outside. Outside lever is inoperable. Inside lever always free. F American Building Supply, Inc. 03/11

7 W - Series Falcon - Heavy Duty Levers UL listed latch standard Solid, pressure-cast zinc levers Wrought brass or bronze roses over steel through-bolted rose inserts Conventional cylinders or interchangeable core keying compatible with SFIC products from Falcon or other manufacturers Door Thickness: 1-3/8 to 1-3/4 standard. Backset: 2-3/4 standard; 2-3/8 also available. Mechanism: Parts constructed of brass or cold-formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose-mounting assembly, and two screws that screw into the chassis assembly. Handing: Locks are non-handed. Cylinder: Furnished Schlage C key way or IC core less core. Trim: Roses are 3-5/8 diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure-cast zinc (solid levers-no-inserts) finished to match mating parts. Latches: 1/2 bolt projection made of stainless steel and UL listed for 3-hour door assemblies. Latches have self-adjusting fronts to accommodate beveled or flat doors. 2-3/8 backset with 2-1/4 x 1 latch faces or 2-3/4 backset with 2-1/4 x 1-1/8 latch faces. Strikes: 4-7/8 x 1-1/4 ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 2. UL: 3-hour A label. Warranty: 1 Year Limited 03/11 American Building Supply, Inc. 7

8 W - Series DESIGNS Dane Falcon - Heavy Duty Levers Quantum Plain Plain FUNCTIONS W101 Passage Latchset Latch bolt by levers at all times. ANSI F75-2 W301 W511 W561 Privacy Lock Latch bolt by levers. Outside lever is locked by push button on inside lever. Rotating inside lever or closing door releases push button and frees outside lever. Inside lever is always free. Emergency release in outside lever unlocks door. Entry/Office Lock Deadlocking latch bolt by levers. Turn/push button locking. Pushing and turning button locks outside lever, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever is always free. Classroom Lock Deadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free. F76-2 F109-2 F84-2 W581 Storeroom Lock Deadlocking latch bolt by lever inside or key outside. Outside lever is always locked. Inside lever is always free. F86-2 Design Dane, Quantum Finish Dane: , 613, 625, 626 Quantum: , 613 Keyway Schlage C IC core stocked 626 Dane only Backset 2-3/4 Standard, also available 2-3/8 8 American Building Supply, Inc. 03/11

9 Y - Series Falcon - Heavy Duty Levers Interchangeable core cylinders are compatible with SFIC products from other manufacturers UL Listed latch standard Smaller rose fits narrow stile doors Cold-rolled steel is zinc plated and chromate coated for rust resistance Door Thickness: Y Series locksets accommodate door thicknesses of 1-3/8 to 1-3/4. Backsets: Universal 2-3/8 2-3/4 UL Listed label latch is standard. Mechanism: Cold rolled steel, zinc plated and chromate coated for rust resistance. Attachment: Outside knob/lever, rose and chassis one single assembly. Inner mechanism secured to outer mechanism with two through-bolt screws through a steel mounting plate. Snap-on inner rose conceals screw heads. Knob/lever mounts over knob/ lever retainer. Handing: Non-handed. May be used in right hand or left hand doors swinging in or out. Cylinders: Furnished Schlage C key way or IC core less core. Latches: 1/2 bolt projection. UL standard. Furnished standard with a universal 2-3/8 2-3/4 backset with a 1-1/8 x 2-1/4 faceplate. Strikes: 2-3/4 x 1-1/8 T-strike standard. Optional ANSI 4-7/8 x 1-1/4. Screws: Furnished with combination wood/machine screws for use on wood or metal doors or frames. ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade /2 hour B label doors. 03/11 American Building Supply, Inc. 9

10 Y - Series Falcon - Heavy Duty Levers DESIGNS 3/8 2-7/16 D Dane 2-9/16 4-3/4 FUNCTIONS Y101 Y301 Y521 Y581 Passage/Closet Latchset Latch bolt by knobs/levers at all times. Privacy Lock Latch bolt by knob/lever from either side except when locked by turn button inside. Emergency release opening in outside knob/lever. Manually returning the turn button to the unlocked position releases inside and outside. Entry/Office Lock Deadlocking latch bolt operated by knob/lever except when outside knob/lever is locked by turn button inside. Inside knob/lever always free. When outside knob/lever is locked, latch bolt is operated by key in outside knob/lever or by rotating inside knob/lever. Turn button must be manually returned to the unlocked position to release outside knob/lever. Lock may be locked or unlocked by key in cylinder outside. Storeroom Lock Knobs Deadlocking latch bolt operated by inside knob or key outside. Outside knob rigid. Levers Deadlocking latch bolt operated by inside lever at all times. Rotating key in outside lever temporarily unlocks mechanism allowing lever to retract latch bolt. When key is removed, outer lever becomes rigid. ANSI F75-2 F76-2 F81-2 F86-2 Design... Dane Finish , 625, 626 Keyway... Schlage C IC core... Dane 626 Only 10 American Building Supply, Inc. 03/11

11 Falcon - Latches B - Series P/W DESCRIPTION FINISH A57420 SL, 2-3/8 BS, 1 Face Plate 626 A57420D DL, 2-3/8 BS, 1 Face Plate 626 A57435 SL, 2-3/4 BS, 1-1/8 Face Plate 626 A57435D SL, 2-3/4 BS, 1-1/8 Face Plate 626 A57620 SL, 2-3/6 BS, 1 Face Plate F/ A57620D SL, 2-3/4 BS, 1-1/8 Face Plate F/ D200 - Series P/W DESCRIPTION FINISH Q ADJ, Square Corner, 1-1/8 x 2-1/4 FP 613, 626 T - Series P/W DESCRIPTION FINISH A92320 SL, 2-3/8 BS, 1 Face Plate 613, 626 A92320D DL, 2-3/8 BS, 1 Face Plate 613, 626 A98535D SL, 2-3/4 BS, 1-1/8 Face Plate 613 W - Series P/W DESCRIPTION FINISH Q DL, 2-3/4 BS, 1-1/8 Face Plate 605, 613, 626 Q DL, 2-3/8 BS, 1 Face Plate 613, 626 Q DL, 2-3/8 BS, 1-1/8 Face Plate 613, 626 Q SL, 2-3/4 BS, 1-1/8 Face Plate 605, 613, 626 Q SL, 2-3/8 BS, 1 Face Plate 613, 626 Q SL, 2-3/8 BS, 1-1/8 Face Plate 613, 625, /11 American Building Supply, Inc. 11

12 Falcon - Cylinders & Keys Interchangeable Standard IC core uses a single spring cover. Core Stocked uncombinated without pins, springs, or keys. Stock keyways A & B Note C606ACC does not include control & operating keys C646 Uncombinated core, 6 pin, Keyways A & B, Finish 626 C647 Uncombinated core, 7 pin, Keyways A & B, Finish 626 C606ACC Temporary core C607 Combinated core, 7pin, Keway A, Finish 626 KB6322A Operating Key for Temp core Blank KB6092A Control Key for temp core Blank KB6322AC Cut Operating Key F/C607 KB6092AC Cut Control Key F/C607 Key Blanks Standard KB577G Standard G Key KB628 A & B Keyway I. C. KB608 A & B Control Blank C953 Rim Cylinder Housing Horizontal tailpiece standard. May be changed to vertical C , 626 Finish 6 pin or 7 pin I. C. Less core C , 626 Finish 1-3/8 F/ 6 or 7pin I. C. Less core C , 626 Finish, 1-1/2 for 6 pin or 7 pin I. C. Less core Cylinders for IC Less Core C987 mortise cylinder housing Furnished with standard #5 cam 985C & 986C Mortise Cylinder 900 Series cylinders are furnished with #4 straight cam and 250 Series with #1 cloverleaf cam unless otherwise specified. 985C 1-1/8 626 Finish 986C 1-1/4 626 Finish CAMS Only AO9894 AO9897 AO9894 for M531 AO9897 for M561 and M American Building Supply, Inc. 03/11

13 R SERIES 19 Series - Rim Device 19-R-TP 1 or 4 05 ABS-American Building Supply, INC. Falcon - Exits DEVICE & TRIM Type Function 19-R-EO 1 or R-DT 1 or R-NL 1 or R-TP-NL 1 or R-K (or L or KIL) 1 or R-K-NL (or L-NL or KIL-NL) 1 or 4 09 Note: For blank escutcheon specify BE. Fire Exit Hardware Speci NON-HANDED RIM DEVICE F-1 Deadlo D C Nar e with modern touchbar styling. This non-handed device covers a EO (Exit Only) device is ready to accept any trim function shown The F 19 Rim fire exit device is an excellent addition to the touchbar E installations on 4'0" x 7'2" single doors and/or 8'0" x 7'2" double door Only) device is ready to accept any trim function shown on page 12. F570 Standard 565 Part number: 19REO X Finish For narrow stile door and removable mullion installations Function stocked: EO exit only Dogging Key Cylinder Dogging Trims Separately: Note: Lever trim is handed 1906T Thumb piece ( new number 910) F570 F NL Night latch ( new number 910NL) Standard Strike optional door and 1910L Entry Lever Dane ( new number 912L) installations Cylinder Dogging 914KIL Dogging BE Key Key in Lever( sectional) Blank Escutcheon 914KIL IC Key in Lever ( sectional) Lever Entry X IC core The Monarch 19-R Series rim device that delivers superior 914KIL KD Key in Lever ( sectional) Lever Entry panic hardware with modern touchbar ANSIstyling. This ANSI nonhanded SERIES SERIES ificationsnon-handed NON-HANDED 914KIL NL Key in Lever ( sectional) RIM Lever Night DEVICE RIM DEVICE Latch F-19-R F-19-R DEVICE device & covers TRIM a 161 cutout Type and may be Function used Speci Hand: Finishes: Non-Handed. Aluminum and Duro 13 4 narrow F-19-R-EO stile aluminum doors. 1 or 4 01 Functions: All functions built into EO device. All 19 Series trim works F-19-R-NL 1 or 4 03 Length: 36 and 48 with rim or vertical devices. See Trim Selection Chart on pages F-19-R-TP 1 or 4 05 ANSI 12 and A Grade 1 standards, UL Listed F-19-R-TP-NL 1 or 4 06 Finishes: Cut Powder-coated out: 161 aluminum SP28; powder-coated duranodic SP313; Fire stainless steel US-32D. Exit Fire Hardware Exit Hardware F-19-R-K (or L or KIL) 1 or 4 08 Strikes: F570 standard. 565, 571/571A, F490 optional. F-19-R-K-NL (or L-NL or KIL-NL) 1 or 4 09 Latchbolt: The Stainless F 19 steel, Rim fire 4" The throw. F 19 exit device Rim fire is an exit excellent device addition is an excellent to the addition touchbar. to This the device touchbar. Note: is non-handed This For blank device escutcheon is and non-handed is specify listed BE. by and UL for is listed B label by fire UL door for B label fire door cking Latchbolt: installations Standard. on installations 4'0" x 7'2" on single 4'0" doors x 7'2" and/or single 8'0" doors x 7'2" and/or double 8'0" doors x 7'2" with double an 6 F 4023 doors with removable an F 4023 mullion removable or KRF mullion The or KRF EO (Exit The EO (Exit Deadlo ogging Feature: Only) device is ready to accept any trim function shown on page 12. F19 2 turn hex dogging Only) standard. device No threaded is ready parts to accept to wear out. any trim function shown on page 12. ylinder Dogging: Specify CD Series prefix. Use 1 - Fire Rated Rim Device 8" long mortise cylinder with standard A cam. Stock Sizes: 3'0" and 4'0". (See chart on page 15.) Doors: 1 3 4" thick, wood or metal. Specify thickness if other than 1 3 4". E rrow Stile Doors: Specify 565 strike. (See chart on page 15.) Projection: 2 1 2" maximum; 1 7 8" dogged. lectric Function: Can be interfaced with building security system. Security monitoring, electric dogging, exit indicator, and exit alarm available. (See separate F570 electrical brochure.) F490 F570 F490 Fasteners: All mounting screws Standard are concealed. Strike Furnished optionalwith sheet metal Standard Strike optional screws. Machine screws available, specify AMS. Sex Bolts: Part 3-#4122 number: ( ) F19REO SNB standard. X finish ANSI: Function Certified ANSI Stocked A EO Grade exit only 1 standards. Shim Kit: For glass lite applications; Trims Separately: See 4" thick specify SK 19-Rpage 1 4". ANSI ANSI ANSI ANSI 161 Cutout: Device covers 161 DEVICE 1906T Thumb & TRIM DEVICE cutout with piece (& KIK/KIL new TRIM and Centron trims. Type number 910) Function Type Function Specifications Specifications Other trim requires cover plate. 1909NL Night latch ( new number 910NL) UL: UL: B label (1 1 B label (1 1 2 F-19-R-EO 1 or 4 01 hr.); 4'0" x 7'2". 2 F-19-R-EO 1 or 4 01 hr.); 4'0" x 7'2". F-19-R-NL 1910L Entry Lever F-19-R-NL Dane ( new 1 or 4number 912L) 1 or Functions: Functions: All functions built into EO device. All 19 Series trim works All functions built into EO device. All 19 Series trim works with rim or vertical devices. See Trim Selection Chart on pages F-19-R-TP 1 or 4 05 with rim or vertical devices. See Trim Selection Chart on pages F-19-R-TP 914KIL BE Key in Lever( sectional) 1 or 4 Blank 05 Escutcheon The F 19 Rim fire exit device 12 is and an 13. excellent addition to the touchbar. 12 and 13. F-19-R-TP-NL 1 or ; F-19-R-TP-NL 914KIL IC Key in Lever ( sectional) 1 or 4 Lever 06 Entry X IC core Finishes: Finishes: This device Powder-coated is non-handed aluminum SP28; and powder-coated duranodic SP313 Powder-coated aluminum SP28; powder-coated duranodic SP313; F-19-R-K (or L or KIL) 1 or 4 08 stainless steel US-32D. F-19-R-K 914KIL (or KD L or Key KIL) in Lever ( sectional) 1 or 4 Lever 08Entry is listed by UL stainless for B label steel US-32D. fire door installations on F-19-R-K-NL (or L-NL or KIL-NL) 1 or 4 09 F-19-R-K-NL 914KIL NL (orkey L-NL in or Lever KIL-NL) ( sectional) 1 or 4 Lever 09Night Latch Strikes: Strikes: Stainless steel, F570 or F x 7 2 single Stainless doors steel, and/or F570 F x 7 2 double Note: For blank escutcheon specify BE. Latchbolt: Latchbolt: Stainless steel, Finishes: Note: For blank Aluminum escutcheon and specify Duro BE. 3 Stainless steel, 3 4" throw. doors with an F 4023 removable 4" throw. mullion or CRF- Deadlocking Latchbolt: Deadlocking Latchbolt: Standard. Standard. Length: 36 and Stock Sizes: Stock Sizes: 3'0" and 4'0". (See chart on page 15.) 3'0" and 4'0". (See chart on page 15.) ANSI A156.3 Grade 1 Doors: 1 3 Doors: 1 3 4" thick, wood or metal. Specify thickness 4" thick, wood or metal. Specify thickness if other than 1 3 if other than 1 3 4". 4". (SNB must be specified on wood or composite doors.) UL for 1-1/2 hour door (SNB must be specified on wood or composite doors.) Cut out 161 Projection: 2 1 Projection: 2 1 2" maximum. 2" maximum. 6 Electric Function: Electric Function: Can be interfaced with building security system. Security Can be interfaced with building security system. Security monitoring, electric dogging, exit indicator, and exit alarm monitoring, electric dogging, exit indicator, and exit alarm available. (See separate electrical brochure.) available. (See separate 03/11 electrical American brochure.) Building Supply, Inc. 13 Fasteners: Fasteners: All mounting screws are concealed. Furnished with all All mounting screws are concealed. Furnished with all machine screws.

14 (or L) 2 or 5 08 F-19-V-EO 2 or 5 01 Hand: Field reversible. Strikes: 3788 strike is surface applied standard, 2130 strike is mortised F-19-V -NL rim works (or KIL) 2 or 5 09 F-19-V-DT into floor. 2 or 5 02 Functions: All functions built into EO device. All 19 Series F-19-V trim rt on pages with rim or vertical devices. See Trim Selection Chart o F-19-V-NL Angle Bracket: Use orangle 5 bracket 03 in flush transom or rabbeted installations. or blank escutcheon specify BE. 12 and 13. Note: F F-19-V-TP Allows 2 use orof 5 standard strike. ranodic SP313; Finishes: Latchbolt: Top stainless steel 3 4" throw. Bottom square bolt 1 Powder-coated aluminum SP28; powder-coated durano F-19-V-TP-NL 2 or " throw. stainless steel US-32D. Deadlocking Latchbolt: Standard. is mortised ABS-American F-19-V-K (or L or KIL) 2 or 5 Fire 08Building Exit Hardware Supply, Strikes: 3788 strike INC. is surface applied strike is mortised in Latch retention hold is in the Dogging Feature: 1 2 turn hex dogging standard. No threaded parts to wear out. top latch. Retainer is released F-19-V-K-NL (or L-NL or KIL-NL) 2 or 5 09 Latchbolt: Top stainless steel 3 4" throw. Bottom square bolt 1 2" thr d Rim, installations. the 19 V when Exit engages Device the strike. complies with most Cylinder Dogging: Specify CD prefix. Use 1 1 8" 3788 long mortise cylinder with Note: For blank escutcheon specify standard BE. Deadlocking Latchbolt: Manufactured Standard. to the same exacting standards as the F A cam. Strike applied. This device is regularly furnished Stock most Sizes: exit door 3'0" requirements, and 4'0". (See chart and on page is fully 15.) reversible and " throw. Stock Sizes: 3'0" and 4'0". (See chart on page 15.) re bolt at bottom. The EO (Exit Only) device is deadlocking Doors: Doors: 1 3 4" thick, wood or metal. Specify thickness if other than ". 19-V SERIES top 4" thick, latch wood retention or metal. and Specify square if other bolt than at 1 3 4" bott thi Falcon - Exits Projection: Narrow Stile Doors: installations.) To 1 3 4" N.S. aluminum. With control trim REVERSIBLE 4" min. stile. VERTICAL ROD DEVICE 2" The maximum. EO (Exit Only) device is ready to ac wear out. Electric Function: Projection: 2 1 2" max., 1 7 Can be interfaced with building security systems. Secu with 8" dogged. electric dogging, exit indicator, and exit alarm availabl Electric Function: Can be interfaced with building security systems. Security 19 Series - Vertical Rod F19 Series - Fasteners: Fire All Rated mounting screws are concealed. All machine screws s monitoring, electric dogging, exit indicator, and exit ANSI ANSI s alarm available. DEVICE & TRIM Sex Bolts: Type 3 #4122 Function ( ) SNB Specifications standard. Composite or non-rein r than 1 3 4". Device Fasteners: Vertical Rod Device Hollow Metal require additional sex bolts. F-19 V: 6 #2 All mounting screws are concealed. Furnished with sheet metal. d: stile. Field reversible. screws. Machine screws available, F-19-V-EO specify AMS. 2 or 5 SNB; 01F-19 V LBR: 3 #2729 #10 24 SNB Hand: ns: All functions built into EO Manufactured device. All 19 Series to trim the works same exacting Sex standards as the 19 Rim, the 19 V Exit Device Fire Bolts: 3 #4122 ( ) SNB standard. F-19-V-DT Exit Hardware ANSI: Hollow core wood, light gauge 2 or 5 Certified 02 ANSI A Grade 1 standards. Manufactured to the same exacting standards as the F 19 Rim, the Functions: ecuritywith rim or vertical devices. See Trim Selection Chart on pages 3788 Hollow Metal, etc. require additional F-19-V-NL sex bolts. 19 V: 6 #2729 F-19-V: 2 or 5 Latch 03retention and 3788 strike top deadbolt and and 13. it Rim, the 19 V Exit Strike Device complies with most #10 24 SNB; 19 V LBR: 3 # #10 24 SNB strike F 19 V bottom. Fire Exit F-19-V-TP Manufactured 2 or 5 to 05 the same exacting standards as the F es: Powder-coated aluminum SP28; complies powder-coated with most duranodic SP313; exit door requirements, Strike applied. This device is regularly furnished ANSI: Device complies Certified ANSI A Grade 1 standards. F-19-V-LBR: with most Latch exit retention door and requirements, and and 2130 Vertical is flush fully 3788 strike top. Finishes: stainless steel US-32D. F-19-V-TP-NL most exit 2 ordoor 5 06 requirements, and is fully reversible and sheet metal and is fully reversible and surface applied. Latch retention hold is in the re bolt at bottom. The EO (Exit Only) device is 19 V: Latch retention and 3788 strike top, deadbolt deadlocking Rods: reversible Furnished and to length surface based on a 40 top latch retention and square 16" horizontal CL from es: 3788 strike is surface applied standard, 2130 strike is mortised top latch. Retainer is released F-19-V-K (or L or KIL) 2 or 5 08 bolt Strikes: at bott This device is regularly furnished with deadlocking transom top or rabbeted latch with installations. latch retention and with deadlocking when it engages strike bottom. the strike. The into floor. applied. This device installations.) is regularly floor and a The EO furnished 7'0" door standard. Variations from these sta, light gauge door is in the closed position. F-19-V-K-NL (or L-NL or KIL-NL) 2 or 5 be specified 09 when (Exit ordering. Only) device is ready to ac 19 V LBR: Latchbolt: 3788 strike top. V: et: 6 #2729 Use 4215 angle bracket in flush 2789 Allows use of standard Cylinder Dogging 3788 strike. Vertical Rods: Furnished to length based on Note: " For horizontal blank escutcheon CL from specify Shim BE. Kit: top latch retention and For glass lites applications; Deadlocking 4" thick specify Latchbolt: SK-19-V- 1 4" square bolt at bottom. square bolt ging Key finished floor and a 7'0" door standard. Variations from 161 at these Cutout: bottom. (This Device device covers 161 is listed cutout with KIK/KIL and Stock Centron Sizes: trim lt: Top stainless steel 3 4" throw. Bottom square bolt 1 2" throw. standards must be specified when ordering. by UL for B label fire ANSI door Other installations.) trim requires cover plate. ANSI Doors: lt: 130 flush s Standard. Shim Kit: For glass lites applications; 1 4" DEVICE thick specify & TRIM SK-19-V- 1 4". Type Function Specifications Projection: re: 1 2 turn hex dogging standard. No threaded parts to wear out. d: Field reversible. 161 Cutout: Device covers 161 cutout with F-19-V-EO KIK/KIL and Centron trims. 2 or 5 01 Electric Function: Hand: g: Specify CD prefix. Use 1 1 8" long mortise cylinder with Other trim requires cover plate. ns: rom All standard functions A cam. built into EO device. All 19 Series trim works F-19-V-DT 2 or 5 02 Functions: rom these with rim or vertical devices. See Trim Selection Chart on pages Fasteners: es: 3'0" F-19-V-NL 2 or and and 13. 4'0". (See chart on page 15.) Sex Bolts: F-19-V-TP 2 or 5 05 es: rs: 1 Powder-coated 4" thick, wood aluminum SP28; or metal. Specify powder-coated thickness if other duranodic SP313; than 1 3 4" ". Finishes: rs: To stainless 1 3 4" N.S. steel aluminum. US-32D. With control trim 2 1 4" min. stile. F-19-V-TP-NL 2 or 5 06 trims es: n: " max., strike 1is 7 8" surface dogged. applied Dogging standard, Key 2130 strike is mortised F-19-V-K (or L or KIL) 2 or 5 08 Strikes: ANSI: n: Can into floor. be interfaced with building security systems. Security F-19-V-K-NL (or L-NL or KIL-NL) 2 or 5 09 Latchbolt: F-19-V: et: monitoring, Use 4215 angle electric bracket dogging, flush exit transom indicator, rabbeted and exit installations. Note: For blank escutcheon specify BE. Deadlocking Latchbolt: alarm Allows available. use of standard 3788 strike. F-19-V-LBR: Stock Sizes: rs: lt: All Top mounting stainless steel screws 3 4" are throw. concealed. Bottom Furnished square bolt with 1 2" sheet throw. metal Latch retention hold is in the Vertical Doors: Rods: lt: screws. Standard. Machine screws available, specify Latch AMS. top latch. Retainer is released retention hold is in the top latch. Retainer is released Projection: 2130 re: ts: 3 # turn hex ( 1 when it engages the strike. The 4 20) dogging SNB standard. standard. No Hollow threaded core when parts wood, it engages to wear light the out. gauge door is in the closed position. strike. Strike Hollow Metal, etc. require additional sex bolts. 19 V: 6 #2729 Electric Function: g: #10 24 Specify CD SNB; prefix. 19 V LBR: Use 13 # Shim Kit: 8" long mortise #10 24 cylinder SNB with standard A cam. 161 Cutout: SI: Certified ANSI A Grade 1 standards. Fasteners: es: 3'0" and 4'0". (See chart on page 15.) V: Latch retention and 3788 strike top, deadbolt and 2130 flush Sex Bolts: rs: strike 1 3 4" thick, bottom. wood or metal. Specify thickness if other than 1 3 4" rs: R: 3788 To 1 3 4" strike N.S. top. aluminum. With control trim 2 1 4" min. stile. Strike ds: n: Furnished 2 1 2" max., to 1 7 8" length dogged. based on " horizontal CL from ANSI: n: finished Can be interfaced floor and a with 7'0" building door standard. security Variations systems. from Security these F-19-V: standards monitoring, must electric be specified dogging, when exit ordering. indicator, and exit it: For alarm glass available. lites applications; 1 4" thick specify SK-19-V- 1 4". F-19-V-LBR: ut: rs: Device All mounting covers screws 161 cutout are concealed. with KIK/KIL Furnished and Centron with sheet trims. metal Latch retention hold is in the Vertical Rods: screws. Machine screws available, specify AMS. top latch. Retainer is released Other trim requires cover plate. ts: 3 #4122 ( 1 when it engages the strike. The 4 20) Features SNB standard. Hollow core wood, light gauge door is in the closed position. Hollow Metal, etc. require additional sex bolts. 19 V: 6 #2729 Part number F19VE X Finish Part number 19VEO X Finish Shim Kit: #10 24 SNB; 19 V LBR: 3 #2729 #10 24 SNB Function Stocked: EO exit only 161 Cutout: SI: Certified ANSI A156.3 Function 2001 Grade Stocked: 1 standards. Exit only Trims Separately: Note: Lever trim is handed See trim page V: Latch retention and Trims 3788 Separately: strike top, deadbolt Note: and Lever 2130 flush trim is handed See Trim page strike T Thumb piece ( new number 910) bottom. 1906T Thumb piece ( new number 910) R: 3788 strike top. 1909NL Night latch ( new number 910NL) 1909NL 2789 Night latch ( Cylinder new number Dogging 910NL) ds: Furnished to length based Dogging on Key " horizontal CL from 1910L Entry Lever Dane ( new number 912L) 1910L Entry Lever Dane ( new number 912L) finished floor and a 7'0" door standard. Variations from these 914KIL BE Key in Lever( sectional) Blank Escutcheon standards must be 914KIL specified when BE Key ordering. Lever( sectional) Blank Escutcheon 914KIL IC Key in Lever ( sectional) Lever Entry X IC core it: For glass lites applications; 914KIL 1 4" IC thick Key specify in Lever SK-19-V- ( sectional) 1 4". Lever Entry X IC core 2130 Strike ut: Device covers 161 cutout 914KIL with KD KIK/KIL Key and in Lever Centron ( trims. 914KIL KD Key in Lever ( sectional) Lever Entry sectional) Lever Entry Other trim requires cover plate. 914KIL NL Key in Lever ( sectional) Lever Night Latch 914KIL NL Key in Lever ( sectional) Lever Night Latch Finishes Aluminum and Duro Finishes: Aluminum and Duro Lengths: 36 X 84 and 48 X 84 Lengths: 36 X 84 and 48 X 84 ANSI A156.3 Grade 1 standard ANSI A Grade 1 Standard; UL Listed UL B labeled 1-1/2 hour door 2130 Strike 2130 Strike 14 American Building Supply, Inc. 03/11

15 19 Series - Trim Designs All Trims Supplied Less Cylinder ABS-American Building Supply, INC. Falcon - Exits 1910L (912) L Trim Mortise Cylinder 1-1/8 Required 1909NL (910NL) Rim Cylinder Required 1906T (910TP) Mortise Cylinder 1-1/8 Required Aluminum, Duro 914 KIL KD Entry 914 KIL BE Blank Escutcheon 914 KIL IC Entry 914 KIL NL Night Latch Aluminum, Duro 03/11 American Building Supply, Inc. 15

16 25 R Series - Rim Exit Device ABS-American Building Supply, INC. Falcon - Exits Features Non handed 299 strike standard, other strikes available on special order Latch bolt: Stainless Steel, ¾ throw Dogging Feature: 1/2 turn hex dogging standard, No thread parts to wear out Stock sizes: 36 and 48 width doors, ANSI: Certified ANSI A Grade 1 Sex Bolts: ( optional) Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device specify eight (8) #2729 sex bolts. With Trim specify four (4) 2729 sex bolts EL function : Can be interfaced with Building security systems. Options: Cylinder Dogging kit: Specify 25CDK 1-1/8 Mortise cylinder not included. 36 door width US3, US26, 313AN, US26D 48 door width 313AN, US26D EL Function stocked: 36 door width 26D F25-R Series - Fire Rim Exit Device Features Non Handed A label 3 hours 4 0 X 8 0 ; 8 0 X 8 0 with F4023 Mullion B label 1-1/2 hour for 8 0 X 8 ) with KRF4023 Mullion 299F strike standard, other strikes available on special order Latch bolt: stainless Steel, ¾ throw Deadlocking latch bolt standard Stock sizes: 36 and 48 width doors Mounting Height: 40-1/4 form CL to finished floor Fasteners: All mounting screws are concealed, All machine screws standard Sex Bolts: ( optional) Required when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device specify eight (8) #2729 sex bolts. With Trim specify four (4) 2729 sex bolts ANSI: Certified ANSI A Grade 1 Standards 16 American Building Supply, Inc. 03/11 EL function : Can be interfaced with Building security systems. 36 door width US3, US26, 313AN, US26D 48 door width :313AN, 26D EL Function stocked : 36 door width, 26D

17 Falcon - Exits 25 V Series - Vertical Rod Exit Device Hand:Field Reversible Strikes: 3788 Top strike is surface applied; 2130 bottom strike is mortised into the floor Latch bolt: Top stainless steel ¾ throw; Bottom bolt is ½ throw Latch Retention Hold: Standards with top latch Sex Bolts: ( Optional) Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors, Fro EO device, specify twelve (12) #2729 sex bolts,, For devices with trim specify eight (8) #2729 sex bolts ANSI : Certified ANSI A Grade 1 standard EL function : Can be interfaced with Building security systems. Options: Cylinder Dogging kit: Specify 25CDK 1-1/8 Mortise cylinders not included. 12 & 36 Extension rods Available. 36 X 96 door size US3, US26, 313AN, US26D 48 X 96 door size 313AN, US26D EL function stocked: 36 X 96 door size 26D F25 V Series - Fire Vertical Rod Device Features Hand: Field Reversible UL: A Label 3 hour; 8 X minute same egress, 8 X 10 Wood Door: 20 minute 8 X 10 ; 90 minute 8 X 9 Strikes: 3788 Top strike is surface applied; 2130 bottom strike is mortised into the floor Latch bolt: Top stainless steel ¾ throw; Bottom bolt is ½ throw Deadlocking Latch bolt: Standard in top latch Latch Retention Hold: standard with top latch F25-V LBR; Less bottom rod vertical device; A Label 3 hour- 8 X 8 90 minute same egress Wood Door 20 minute 8 X 8 openings. (F-LBR Must be ordered in pairs) Fasteners: All mounting screws area concealed machine screws Sex Bolts: ( Optional) Required when device is used with hollow core wood, composite or light gauge hollow metal doors, Fro EO device, specify twelve (12) #2729 sex bolts,, For deices with rim specify eight (8) #2729 sex bolts ANSI: Certified ANSI A156.3 Grade 1 standard EL function : Can be interfaced with Building security systems. Options: 12 & 36 Extension rods Available. F25 V Stock Finishes: 36 X AN, US26D 48 X AN, US26D F25 V LBR Stocked : EL Function stocked: 36 X 96 and 48 X AN,US26D (Must be ordered in pairs) 36 X 96 26D 03/11 American Building Supply, Inc. 17

18 Falcon - Exits 25 M Series - Mortise Exit Device Hand: Field Reversible Strike: 1279 standards Latch bolt: Stainless steel, ¾ throw Deadlocking Latch bolt: Standard Dogging Feature: ½ hex turn, no thread parts to wear out Options: Cylinder Dogging kit :Specify 25CDK 1-1/8 Mortise Cylinder not included. 36 Width door in 26D Fasteners: All mounting screws are concealed metal screws. Sex Bolts: ( optional) Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts ANSI: Certified ANSI A Grade 1 Mortise Lock: Heavy wrought lock case with cast or sintered steel parts. Locks are designed to fit standard ANSI A115.1 preparation for 1-/34 thick doors Deadlocked when auxiliary bolt is depress 5/`6 F25 M Series - Fire Mortise Exit Device 36 Width door in 26D Hand: Field Reversible UL: A label 3 hour, 4 X 10 single doors, 8 X 10 pair of doors. (F25M X F25V) B Label ( 1-1/2 hour) with F1280 open back strike Strike: 1279 standard Latch bolt: Stainless steel, ¾ throw Deadlocking Latch bolt: Standard Fasteners: All mounting screws are concealed metal screws. Sex Bolts: ( optional) Required when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts 18 American Building Supply, Inc. 03/11

19 Falcon - Exits 25-C Series - Concealed Vertical Rod Device Hand: Field Reversible Strikes: 4188 mortised top, 2130 bottom standard Latch bolt: Top Stainless steel 3/4 throw, Bottom bolt ½ throw Deadlocking Latch bolt: Standard in top latch Latch Retention Hold; Standard in top latch Dogging Feature: ½ turn hex dogging standard, no threaded parts to wear out Fasteners: All mounting screws are concealed metal Sex Bolts: ( optional) Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts ANSI: Certified ANSI A Grade 1 standards. Vertical Rods Furnished to length based on 40-1/4 horizontal CL to finished floor and a 7 0 door Options: Options: Cylinder Dogging kit: Specify 25CDK 1-1/8 Mortise Cylinder not included. 12 & 36 Extension Rods Available. 36 X 84 US26D 03/11 American Building Supply, Inc. 19

20 Falcon - Exits F25-C Series - Fire Concealed Vertical Rod Device F25C-WDC Series Fire Wood Door Concealed Vertical Rod Device Features Hand: Field Reversible UL: A Label 3 hour- 8 X minute same egress, 8 X 10 Wood Door: 20 minute 8 X 9 90 minute 8 X 8 Strikes: 4188 mortise top; 2130 flush strike bottom Latch bolt: Top Stainless steel 3/4 throw, Bottom bolt ½ throw Deadlocking Latch bolt: Standard in top latch Fasteners: All mounting screws are concealed metal Sex Bolts: ( optional) Required when device is used with hollow core wood, composite or light gauge hollow metal doors, For EO device specify six (6) #2729 sex bolts. With Trim specify two (2) 2729 sex bolts ANSI: Certified ANSI A Grade 1 standards WDC-20: Reinforced plates supplies standard for 20 minute doors only Vertical Rods Furnished to length based on 40-1/4 horizontal CL to finished floor and a 7 0 door F25C F25C-WDC 36 X 84 US26D 36 X 96 US26D, US3, US26 20 American Building Supply, Inc. 03/11

21 Falcon - Exits Exit Alarm - EAK Retrofit for 25 Series devices. The Exit Alarm/ Hardwire (EA/ HWEA) feature provides a battery powered exit alarm to allow for a simple and effective means of monitoring the use of exits while still maintaining means of egress (for code requirements). When the touch bar is depressed the alarm will sound continuously, indicating that the exit has been engaged. The exit alarm can only be reset by way of a standard 1-1/8 mortise cylinder with standard A (5/16 wide x 3/4 long) cam. The design of the unit will allow the single 9V battery to last for at least six months (on standby mode). All solid state circuitry. Powered by one 9V alkaline battery (supplied). LED indicator showing armed status of alarm. 10 second delay (during arming) permitting egress. Outside key entry without activating alarm (will not work when set up as DM option to activate EA). Works with rim, mortise, concealed, surface vertical rod. EAK retrofit kit available for your existing devices. Alarm sounds continuously at 90 db level for approximately 10 minutes prior to automatic reset. Low decibel beeping will continue at intervals until manual reset (HWEA only). Low battery power indication. UL listed. * For applicat ions on surface vertical rod devices, specify DM (Device Monitor). * * Not recommended as a retrofit kit for your existing surface vertical. EAK 36 & 48 AL 03/11 American Building Supply, Inc. 21

22 Falcon - Exits Lever Trim Only 510 L - Entry Lock/Unlock, 1-1/4 Mortise Cylinders Not Included. 510 NL - Night Latch, Store Room, 1-1/4 Mortise Cylinders Not Included. 510 BE - Blank Escutcheon, 1-1/4 Mortise Cylinders Not Included. 511 L - Entry Vandal Resistant, 1-1/4 Mortise Cylinders Not Included. 510 L FSE - Entry Electrical Unlock, 1-1/4 Mortise Cylinders Not Included. 510 DT - Dummy Trim 510L 510L-NL 510L-DT 510L-BE Pull Trims 512TP - 1-1/4 Mortise Cylinders Not Included. 512TP-NL - Night Latch, 1-1/4 Mortise Cylinders Not Included. Escutcheon: 2-1/4 x 16 Grip: 6-1/4 C-C Projection: 2-11/16 Brass and Stainless Steel 510L, 510BE, 510NL Dane US3, US26, SP313, 26D Quantum SP313, 26D 510DT Dane 26D, SP L Dane SP313, 26D Quantum SP313, 26D 510L-FSE Dane 26D 512TP, 512TP-NL Quantum 26D 26D only 22 American Building Supply, Inc. 03/11

23 l Rod Device is designed to meet the demanding requirements of higher traffic installations. lied (including strikes) vertical rod type with the traditional crossbar design. Min. Door DEVICE Length Strike Stile Opening Width XX-R-EO Flush up to up to 3 11 F570/F up to 4 0 Specificati Fire Exit Hardware ABS-American Building Supply, INC to 3 10 The Monarch F-XX-V Series Fi installations. The F-XX-V is a surf REVERSIBLE VERTICAL ROD DEVICE XX-V SERIES S 3788 NON-HANDED RIM DEVICE XX-R SERI NON-HANDED RIM DEVICE Strike XX-R SER Cro Note: See page 15 for additional strike information. Approximate. See appropriate templates. Lat Panic Exit Specifications Hardware Deadlocking Lat Hand: Field reversible. Dogging F Panic Exit Hardware Cylinder Do The Monarch XX-V Series Functions: Vertical Rod See Device Trim Selection is designed Chart pages to on meet 16 & 17. the demanding requirements of higher traffic installations. Stock The XX-V device is a surface-applied Finishes: US3 (including (605); US4 strikes) (606); US10 vertical (612);US10B rod (613); type US26 with (625); the traditional crossbar design. US26D (626); US32 (629); US32D (630). The Monarch XX-R Series Rim is produced to meet the demanding require 3788 Strikes: 3788 strikes are surface XX applied. Series 2130 strike a single is mortised point, - into Rim floor. rim type Device latch with the traditional crossbar design. Strike Angle Bracket: 2789 Dogging Key Arms: Crossbars: Latchbolt: Deadlocking Latchbolt: Latch Retention Hold: Dogging Feature: Cylinder Dogging: Stock Sizes: Doors: Projection: Stile: Electric Function: Fasteners: Sex Bolts: ANSI: XX-V: XX-V-LBR: Vertical Rods: Falcon - Exits Use 4215 angle bracket in flush transom installations. Allows use of standard 3788 strike. Forged brass, aluminum and investment cast stainless steel. 1 O.D., brass, bronze and stainless steel. Reinforced Fas crossbars available. Top stainless steel, Specifications 4 throw. Bottom stainless F570 steel bolt, 1 2 throw (Standard) Strike Dogging Key Standard. F570 Hand: 579 Field reversible Sex Standard with top latch. (Standard) Functions: Strike Dogging Key See Trim Selection Chart pages on 16 & turn hex dogging standard. No threaded parts to wear Finishes: out. US3 (605); US4 (606); US10 (612);US10B (613); US26 (625); Double Cy Specify CD prefix, uses rim cylinder. US26D (626); US32 (629); US32D (630). Double Outside Cy 4 0 standard. Strikes: 3788 strikes are surface applied strike is mortised into floor /571A F thick, wood or metal. Specify thickness (Optional) if Angle other than Bracket: (Optional) Use 4215 angle Strike bracket in flush transom installations. Allows use of Center Case & Working /571A standard 3788 strike. F490 5 maximum, 4 dogged. (Optional) (Optional) Strike Arms: Forged brass, aluminum and investment cast stainless steel minimum when used in pairs. Crossbars: 1 O.D., brass, bronze and stainless steel. Reinforced Can be interfaced Part with building number security XXREO systems. X finish Lock/unlock and crossbars available. Min. Door security monitoring available. (See separate DEVICE electrical brochure.) Handed Specify LHR or RHR Length Strike Stile Opening Width Specificatio Latchbolt: Top stainless steel, 3 4 throw. Bottom stainless steel bolt, 1 2 throw. All mounting screws are concealed. Sheet metal screws standard. Trim available Deadlocking See XX-R-EO page Latchbolt: 6, Same 4 trim Standard. 565 as Flush The 2 6 Monarch up to 3 10 XX-R Series Rim H Machine screws available, specify AMS up to 3 11 Latch Retention Hold: Standard with top latch. Functi When device is used 18 with series hollow core, composite or light gage Device is produced to meet the F570/F up to 4 0 Hollow Metal, specify Finishes: 14-#2729 US3, SNB. 10B When Dogging and used with 32D Feature: turn hex dogging standard. demanding 2 6 No up threaded to requirements 3 10 parts to wear of out. through-bolted trim, deduct 4 SNB. Finis Lengths: 48 stock; Cylinder can be Dogging: cut downspecify CD prefix, uses higher rim cylinder. traffic installations. This Certified ANSI A Grade 1 standards. Cross Bars: 1 OD Stock Sizes: 4 0 standard. device is a single point, rim type Stri Latch retention latch top strike top, bottom bolt 2130 flush Doors: thick, wood or metal. Specify thickness if other than strike bottom. Projections: 5 Maximum; 4 when dogged latch with the traditional crossbar Projection: 5 maximum, 4 dogged. A Less bottom rod vertical ANSI device. A Grade 1 standards design. Stile: 2 Crossb 6 4 minimum when used in pairs. Furnish to length based on a horizontal CL from finished floor, and a 7 0 door standard. Variations from Note: Electric these See standards Function: page 15 must for beadditional Can interfaced strike information. with building security systems. Lock/unlock and specified when ordering. Approximate. See appropriate security monitoring templates. available. (See separate electrical brochure.) Latchb Fasteners: All mounting screws are concealed. Sheet metal screws standard. Deadlocking Latchb Machine screws available, specify AMS. Dogging Feat Sex Bolts: When device is used with hollow core, composite or light gage Cylinder Dogg Hollow Metal, specify 14-#2729 SNB. When used with through-bolted trim, deduct 4 SNB. Stock S ANSI: Certified ANSI A Grade 1 standards. Do XX-V: Latch retention latch top strike top, bottom bolt 2130 flush XX series - Vertical strike bottom. Rod Device XX-V-LBR: Less bottom rod vertical device. Part number XXVEO Vertical X finish Rods: Furnish to length based on a horizontal CL from finished floor, and a 7 0 door standard. Variations from these standards must be Handed: Specify LHR or RHR specified when ordering. Trim available; See page 6, same trim as 18 series Finishes: US3, 10B, 32D The Monarch XX-V Series Vertical Rod Device is designed to meet the demanding requirements of higher traffic installations.the XX-V device is a surface-applied (including strikes) vertical rod type with the traditional crossbar design Strike Fun Proj Mounting H Electric Fu Project Mounting Hei Electric Funct Fasten Sex B A Double Cylin Double Outside Cylin Center Case & Working Pa 2130 Strike 8 03/11 American Building Supply, Inc. 23

24 XX - Trim Designs All Trims Supplied Less Cylinder 812L Trim 812L Dane Rim Cylinder Required Falcon - Exits 812L Quantum Rim Cylinder Required 812L BE Dane Specify: 812LR - Rim 812LV - Vertical 10B, 32D US3 DANE ENTRY 820 NL Vanguard and Trim Rim Cylinder Required 10B, 32D 24 American Building Supply, Inc. 03/11

25 Falcon 19, 25, and XX Accessories and Options Removable Mullion The F4023, KRF-4023 and KR-4023 steel mullions are for use with the 19-R, 25-R, and XX-R devices on double door openings. Advantage: Increased security and tighter closure. Minimizes door warpage and sag. Regulates the flow of in-and-out traffic. Falcon removable mullions are easily removed and reinstalled for full width access. Rim devices are used on both leaves, attaining a perfectly symmetrical opening. The mullion assembly consists of a mullion, top and bottom mounting brackets and a screw pack. The F4023 and KRF-4023 fire-rated mullions also include four stabilizer blocks as required for labeled installations. Mullions may be cut on the job for doors under stock lengths. KR Mullions require 11 4 mortise cylinder with standard A cam. Features Mullion fittings ductile iron. F4023, 4023, KRF-4023 and KR x 3 x height mullion - 1-1/2 x 2-1/2 x height. Prime coat only. 7 or 8 door opening standard, other door opening as specified. Cylinders Cylinder supplied only when specified. Cylinders keyed different unless specified keyed alike. Sex Bolts 325 ( Thread) 425 (#10-24 Thread) 4023,F & 8 0 Prime Coat KR4023,KRF & 8 0 Prime Coat DOUBLE DOOR APPLICATION Strike Installed With Min. Stile B * mullion mullion F F-4023 mullion F F-4023 mullion mullion mullion mullion mullion mullion mullion Surface 25-V *Backset to vertical center line on the device. 03/11 American Building Supply, Inc. 25

26 Falcon 8200 Series - Low Energy Operator Designed to fit perfectly. The small footprint and elegant design of the Falcon 8200 Series make it a perfect solution for a range of applications. Assisted living Retail Restaurants. Hospitality Small office Ambulatory care 8231 Pull side operation 8242 Push side operation Finish: aluminum 26 American Building Supply, Inc. 03/11

27 Falcon - Closers SC61 Series - Light to Medium Duty Closer Meets ANSI A ANSI/BHMA A156.4, Grade 1 UL Listed 1-3/8 diameter piston Closer mounts hinge side, top jamb or parrallel arm when either the Rw/PA or Hw/PA arm is specified. Adjustable sizes 1-4 Single piece cast aliminum body Staked valves Non-handed left or right swinging doors Separate adjustable general speed, latch speed, and backcheck Heat-treated steel piston Heat-treated pinion UL 10C approved fluid Universal screw pack 10-year warranty SC61 Aluminum, Dark Bronze SC80 Series - Medium Duty Closer Meets A156.4, Grade 1 Standard 1-3/8 diameter piston Ready to mount hinge side, top jamb or parrallel arm configurations Arm options: regular Suitable for interior doors up to 48 (1219 mm) wide, exterior doors up to 36 (914 mm) and can be adjusted to meet the ADA accessability requirements Single piece cast aliminum body Staked valves Non-handed left or right swinging doors Separate adjustable general speed, latch speed, and backcheck Heat-treated steel piston Heat-treated pinion Cover is high-impact UL listed fire retardant plastic that meets UL 10C and UBC-7-2 (1997) fire test UL 10C approved fluid Universal screw pack 10-year warranty SC81 Aluminum, Dark Bronze 03/11 American Building Supply, Inc. 27

28 Falcon - Closers SC90 Series - Light Duty Closer Meets A156.4, Grade 1 Ready to mount hinge side, top jamb or parrallel arm configurations Arm options: regular Single piece cast aliminum body Non-handed left or right swinging doors Separate adjustable general speed and latch speed Heat-treated steel piston Heat-treated pinion UL 10C approved fluid Universal screw pack 10-year warranty SC91 Aluminum, Dark Bronze Series Transmission Kit Falcon - Actuators T - Series Round Surface 4-1/2 Actuator Series Wireless Receiver Series 4-1/2 Box only 28 American Building Supply, Inc. 03/11