Product catalogue 2013
|
|
- Lester Watts
- 5 years ago
- Views:
Transcription
1 Product catalogue 0 Framing Nailers Anchor Nailers Framing Nailers 7 Coil Nailers Haften Nailers Corrugated Nailers Concrete Nailers 7 Brad and Finish Nailers Staplers Repair and service 7 Conversion Table 9 November 0
2 Complete range of gas-powered tools for professional use Second generation gas nailers! See the most important changes here in the catalogue or try out the nailers at your nearest dealer, and experience high power and maximum freedom of movement. TJEP gas technology is modern design and high quality in one. A well-balanced and ergonomic gas nailer lets you forget everything about compressors, hoses and heavy battery systems. It doesn t get easier! Read more about TJEP GRF /90 GAS G for strip nails on page Read more about TJEP GRF /0 GAS for strip nails on page NEW Read more about TJEP KA 00 GAS G for anchor nails on page Read more about TJEP FH /90 GAS G for strip nails on page 8 Read more about TJEP HA- GAS G for HA haften nails on page Read more about TJEP CP-0 GAS G for 0 concrete nails on page 8 Read more about TJEP TF-8/0 GAS G for. mm 0 brads on page Read more about TJEP VF-/ GAS G for. mm 0 finish nails on page NEW Read more about TJEP TF-/ GAS G for. mm 0 finish nails on page 9 Read more about TJEP AB-/ GAS for.8 mm finish nails on page Read more about TJEP PQZ-7 GAS G for PQ and PZ staples on page
3 Framing Nailers Nailers TJEP GRF /90 GAS G... TJEP GRF /0 GAS... TJEP GRF /90 LW... TJEP GRF /00... TJEP GRF 00 Compact XP... 7 Fasteners TJEP GF nails... 8 TJEP DE nails... 8 TJEP GR nails... 9 Tel. + 97
4 Framing Nailers TJEP GRF /90 GAS G High power 9 joules - Full function down to - c with all-season fuel cell (008) New 0 model New handle, better support New air filter, less maintenance New safety bracket, improved trigger L: 0-90 mm Ø:.8 -. mm GR, DE & GF nails, p. 8-9 Well-balanced Adjustable depth control Rubber pad anti-skid Easy to clean Rafter/belt hook 0080 EAN no mm 7 x 08 x 7 mm incl. battery. kg Supplied with batteries and charger in plastic case. TJEP fuel cell, mm, orange ring 008 TJEP all-season fuel cell, mm, red ring (- c) 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 Decra Safety bracket 0089 Wood flooring probe 008 No-mark set, pcs raftering, plywood, laths, siding, flooring, boarding, decking
5 - Framing Nailers TJEP GRF /0 GAS Most powerful gas nailer on the market joules Full function down to - c with green fuel cell (0088) Very powerful Great balance L: - 0 mm Ø:.8 -. mm GR & GF nails, p. 8-9 Adjustable depth control Rubber pad anti-skid Easy to clean Rafter/belt hook EAN no mm x x 0 mm incl. battery.0 kg Supplied with batteries and charger in plastic case. TJEP fuel cell, mm, green ring 0088 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 raftering, roof battening, plywood, laths, siding, flooring, boarding Tel. + 97
6 Framing Nailers TJEP GRF /90 LW TJEP GRF /00 NEW New, lighter version only,0 kg Introduced in 0 Up to 98 mm ring shank nails, also in hardwood Compact design Single shot or bump fire Lightweight Adjustable air exhaust L: 0-90 mm Ø:.8 -. mm Single shot or bump fire Adjustable depth control Adjustable air exhaust L: 0-98 mm Ø:.8 -. mm Non-slip grip / less hand fatigue Adjustable depth control No-mark pad GR & GF nails, p. 8-9 No-mark pad GR & GF nails, p EAN no mm Air consumption per cycle.0 litres 80 x x 0 mm.0 kg Air tool lube X-R 00 ml 09 raftering, roof battening, laths, boarding, flooring, siding 0008 EAN no mm Air consumption per cycle.0 litres 08 x x 7 mm.80 kg Air tool lube X-R 00 ml 09 raftering, roof battening, laths, outside siding, panelling, boarding, flooring
7 Framing Nailers TJEP GRF 00 Compact XP The craftman s preferred framing nailer Compact design Great balance L: 0-98 mm Ø:.8 -. mm GR & GF nails, p. 8-9 Adjustable air exhaust Adjustable depth control Rear two-step loading No-mark pad 0008 EAN no Air consumption per cycle 0-98 mm.0 litres 9 x x mm. kg Flooring nose piece 8798 Air tool lube X-R 00 ml 09 raftering, roof battening, laths, boarding, flooring, siding Tel
8 Framing Nailers TJEP GF and DE nails, Full head Wide range of TJEP full head nails GF and DE nails fit TJEP GRF /0 GAS, GRF /90 GAS, GRF /00, GRF 00 Compact XP, GN 00 Compact, GN 00, GRF /90 Paslode PSN00, F-00, F-0, GN 0, IM0/90, IM90i, PSN98, IM00i MAX GS-90 CH Ring shank nails with full head Handybox Dimension Pcs/box Box/pallet GF 8/0 800,00.7 kg 0 GF 8/ 80,00.07 kg 0 GF 8/ kg 0 GF / kg 0 GF / kg 0 Ring shank nails with full head A stainless Handybox Dimension Pcs/box Box/pallet GF 8/ 8,00.8 kg 0 GF 8/ kg 0 GF / kg 0 Smooth shank nails with full head Maxibox Dimension Pcs/box Box/pallet GF /90 887, kg 0 GF /90 887, kg 0 Ring shank nails with full head Maxibox Dimension Pcs/box Box/pallet GF 8/ 8, kg 0 GF 8/7 87,00 9. kg 0 GF 8/80 880, kg 0 Decra ring shank nails with full head Handybox Dimension Pcs/box Box/pallet DE /0 black 80,00.8 kg 0 DE /0 red 80,00.8 kg 0 All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless 8
9 Framing Nailers TJEP GR nails, D-head TJEP D-head nails for any task... GR nails fit TJEP GRF /0 GAS, GRF /90 GAS, GRF /00, GRF 00 Compact XP, GN 00 Compact, GN 00, GRF /90 Paslode PSN00, F-00, F-0, GN 0, IM0/90, IM90i, PSN98, IM00i Senco FP, SP80, GT 90 CH, SN 9 DO MAX GS-90 CH, SN 890 CH Ring shank nails with D-head Jumbobox Dimension Pcs/box Box/pallet GR 8/0 880, kg 8 GR 8/ 88, kg 8 GR 8/7 887, kg 8 GR / , kg 8 GR / , kg 8 Smooth shank nails with D-head Maxibox Dimension Pcs/box Box/pallet GR 8/ 8, kg 0 GR 8/7 87, kg 0 GR 8/80 88, kg 0 GR /80 88, kg 0 GR /90 89, kg 0 GR /00 899,00 0. kg 0 GR /90 89, kg 0 Ring shank nails with D-head Maxibox Dimension Pcs/box Box/pallet GR 8/0 80, kg 0 GR 8/ 8, kg 0 GR 8/7 877, kg 0 GR 8/80 88, kg 0 GR /7 87, kg 0 GR /80 88, kg 0 GR /90 890, kg 0 GR /98 898, kg 0 GR 8/ 80, kg 0 GR 8/ 8, kg 0 GR 8/7 87, kg 0 GR /90 890, kg 0 GR /00 899, kg 0 GR 8/0 800,00 9. kg 0 GR 8/ 80,00 8. kg 0 GR 8/7 807, kg 0 GR / , kg 0 GR / ,800. kg 0 All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless Tel
10 Did you know that at you can see which nails and accessories fit the specific tools? Scan the code and visit with your 0 mobile phone or tablet (ipad)
11 Anchor Nailers Nailers TJEP BC 0... TJEP KA 00 GAS G... TJEP KA... TJEP KA L... TJEP KA... Fasteners TJEP BC nails... TJEP KA nails... Tel. + 97
12 Anchor Nailers TJEP BC 0 TJEP BC nails, Full head BC nails, p. L: - 0 mm Ø:.0 mm 00 nails per coil Adjustment of magazine height Ergonomic rubber grip Adjustable air exhaust Adjustable depth control Belt hook 0009 EAN no mm Air consumption per cycle. litres 78 x 00 x 7 mm. kg BC nails fit TJEP BC 0 MAX HN-J BC anchor nails Dimension Pcs/box Box/pallet BC 0/ 87,00. kg 0 BC 0/0 87,00. kg 0 BC 0/0 87,00.9 kg 0 BC 0/ kg 0 BC 0/0 870,00.79 kg 0 Air tool lube X-R 00 ml 09 metal connector plates All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless
13 Anchor Nailers TJEP KA 00 GAS G - New 0 model New handle, better support New air filter, less maintenance Full function down to - c with all-season fuel cell (008) Precise insertion in nail plates Non-slip grip / less hand fatigue KA nails, p. L: 0-0 mm Ø:.0 mm Adjustable depth control Rafter/belt hook Rear two-step loading 008 EAN no mm x x 9 mm incl. battery.7 kg Supplied with batteries and charger in plastic case. TJEP fuel cell, mm, orange ring 008 TJEP all-season fuel cell, mm, red ring (- c) 008 TJEP battery. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 metal connector plates Tel. + 97
14 Anchor Nailers TJEP KA TJEP KA L Easy access everywhere Long magazine with room for two nail strips Compact outer dimensions Compact outer dimensions Drives the nail in with short punches Drives the nail in with short punches L: 0-0 mm Ø:.0 mm No risk of ricochets Shock-absorbing rubber handle Rubber collar L: 0-0 mm Ø:.0 mm No risk of ricochets Shock-absorbing rubber handle Room for two nail strips KA nails, p. KA nails, p. 00 EAN no mm Air consumption per cycle.0 litres 77 x x mm.88 kg Air tool lube X-R 00 ml 09 metal connector plates 00 EAN no mm Air consumption per cycle.0 litres 7 x x mm.0 kg Air tool lube X-R 00 ml 09 metal connector plates
15 Anchor Nailers TJEP KA TJEP KA nails, Full head Easy access everywhere with nails up to 0 mm KA nails, p. L: 0-0 mm Ø:.0 mm Compact outer dimensions Drives the nail in with short punches No risk of ricochets Shock-absorbing rubber handle Rubber collar 009 EAN no , 0, 0 mm Air consumption per cycle. litres 87 x 8 x 79 mm. kg Air tool lube X-R 00 ml 09 KA nails fit TJEP KA 00 GAS, KA, KA, KA L, BS-, BS-, BS-L Paslode BS 00, PSN 0NP, F0S-PP Senco MC 0, PRO-BS00 KA anchor nails Dimension Pcs/box Box/pallet KA 0/0 870,00.0 kg KA 0/0 870, kg KA 0/0 870, kg KA 0/0 8700,00.0 kg KA anchor nails, A stainless Dimension Pcs/box Box/pallet KA 0/0 870, kg metal connector plates All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless Tel. + 97
16 Did you know that at you can see the entire TJEP product range? Scan the code and visit with your mobile phone or tablet (ipad)
17 Framing Nailers Nailers TJEP FH /90 GAS G... 8 TJEP FH TJEP FH TJEP FH /90 LW... 0 Fasteners TJEP FH nails... 0 Tel
18 - Framing Nailers TJEP FH /90 GAS G New 0 model New handle, better support New air filter, less maintenance New safety bracket, improved trigger Full function down to - c with all-season fuel cell (008) Rafter/belt hook Non-slip grip FH nails, p. 0 L: 0-90 mm Ø:.9 -. mm Rear two-step loading Rubber pad anti-skid Adjustable depth control Great balance 0087 EAN no mm x x 0 mm incl. battery.7 kg Supplied with batteries and charger in plastic case. TJEP fuel cell, mm, orange ring 008 TJEP all-season fuel cell, mm, red ring (- c) 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 laths, roof battening, decking, siding, flooring, boarding 8
19 Framing Nailers TJEP FH 0 TJEP FH 0 For nails up to 0 mm Top load Top load Non-slip grip Non-slip grip L: 90-0 mm Ø:. -.8 mm Low noise Very low recoil Adjustable depth control L: 00-0 mm Ø: mm Low noise Very low recoil Adjustable depth control FH nails, p. 0 Extra handle on the side FH nails, p. 0 Extra handle on the side EAN no mm Air consumption per cycle. litres x 0 x 7 mm.0 kg Air tool lube X-R 00 ml 09 roof battening, laths, siding, decking, boarding, wood frames EAN no mm Air consumption per cycle. litres x 0 x 0 mm.80 kg Air tool lube X-R 00 ml 09 roof battening, laths, siding, decking, boarding, wood frames Tel
20 Framing Nailers TJEP FH /90 LW TJEP FH nails NEW Full head New, lighter version only,0 kg FH nails, p. 0 L: 0-90 mm Ø:.9 -. mm EAN no mm Air consumption per cycle.0 litres 0. x x. mm.0 kg Air tool lube X-R 00 ml 09 roof battening, siding, decking, boarding Single shot or bump fire Rafter/belt hook Adjustable air exhaust Rear two-step loading Adjustable depth control FH nails fit Tjep FH 0, FH 0, FH /90, FH /90 GAS, FH, FH Duo-Fast CN00, CN0, NSP 0F Senco FP, SNI 0, GT 90 FRH, STN 0 MAX GT90FRH, GS-90RH Smooth shank nails with full head Dimension Pcs/box Box/pallet FH 8/0 070,0. kg 7 FH / kg 0 Ring shank nails with full head Dimension Pcs/box Box/pallet FH 8/0 880,00.80 kg 0 FH 8/0 0709,0. kg 7 FH 9/0 070,00. kg 0 FH 9/ 07,00.8 kg 0 FH 9/7 07,00.7 kg 0 FH /90 079,00. kg 0 FH /98 07,000.8 kg 0 FH 8/0 07,0.0 kg 7 Twisted nails with full head Dimension Pcs/box Box/pallet FH / kg 0 All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless 0
21 Framing Nailers Coil Nailers Nailers TJEP TA... TJEP MX 0... TJEP ZE... TJEP PC... TJEP PC TJEP CN TJEP CN TJEP CN 00 EPAL... 9 Fasteners TJEP TA nails... TJEP MX nails... TJEP ZE nails... TJEP PC nails... 7 Tel. + 97
22 Coil Nailers TJEP TA TJEP TA nails Great for roofing felt Roofing felt nails TA nails, p. 00 EAN no Air consumption per cycle L: 9 - mm Ø:.0 mm Adjustable air exhaust Single shot or bump fire Safety grip Adjustment of magazine height Protection plate - non-slip Adjustable depth control 9 - mm. litres 9 x x 7 mm.0 kg Air tool lube X-R 00 ml 09 roofing felt, wind barriers, thin metal plates, covering TA nails fit TJEP TA Paslode 7/ Senco SCN 0R, RP 0, RP Haubold RNC R MAX CN 0 R Ring shank nails with full head Dimension Pcs/box Box/pallet TA 0/9 89,80.9 kg 9 TA 0/ 8,880. kg 0 TA 0/ 8,90.88 kg TA 0/9 809,80.9 kg 9 TA 0/ 80,880. kg 0 TA 0/8 808,90.00 kg 0 Ring shank nails with full head Stainless A Dimension Pcs/box Box/pallet TA 0/ 8,880. kg 0 All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless
23 Coil Nailers TJEP MX 0 TJEP MX nails MX nails, p EAN no Air consumption per cycle L: - 0 mm Ø:. mm - 0 mm. litres 0 x 08 x 0 mm.0 kg Air tool lube X-R 00 ml 09 siding, wood frames, decking, boarding Adjustable air exhaust Single shot or bump fire Adjustment of magazine height Low noise No-mark pad Adjustable depth control MX nails fit TJEP MX 0 MAX CN-, CN 8, HN 0 Haubold RNC 0 M Senco SCN, SCN 8 Ring shank nails with full head Dimension Pcs/box Box/pallet MX / 890,000.8 kg 0 MX /0 8900,00.8 kg 0 MX / 890,00.0 kg 0 MX /0 8900,00.8 kg 0 MX / 890,00. kg 0 MX /0 8900,00. kg 0 Ring shank nails, A stainless, lens head Dimension Pcs/box Box/pallet MX / 89, kg 0 MX / 89,00. kg 0 MX /0 890,00.8 kg 0 Ring shank nails with full head and blunt point Dimension Pcs/box Box/pallet MX / 890,00. kg 0 MX / 89,00.9 kg 0 All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless Tel. + 97
24 Coil Nailers TJEP ZE Also suitable for Decra etc. Single shot or bump fire ZE nails, p. 0 L: - mm Ø:. -. mm Adjustable air exhaust Belt hook Plastic-collated nails No-mark pad Adjustable depth control 00 EAN no Air consumption per cycle - mm. litres 00 x x mm.0 kg Decra safety bracket 80 Air tool lube X-R 00 ml 09 outside siding, boarding, panelling, decking, Decra roofing
25 Coil Nailers TJEP ZE nails ZE nails fit TJEP ZE Duo-Fast CNP 0, CNP, CNP 7 Ring shank nails with full head Dimension Pcs/box Box/pallet ZE /0 80,90. kg 9 ZE /0 80,90.7 kg 9 ZE / 8,90.9 kg 9 ZE /0 8,90.77 kg 9 ZE / 8,00. kg 9 ZE /7* 87,00.7 kg 9 ZE / 80,00.00 kg 9 ZE /0 800,90.0 kg 9 ZE / 80,90.0 kg 9 ZE /0 800,90.70 kg 9 ZE /0 80,90.0 kg 9 ZE / 80,00.9 kg 9 ZE /7* 807,00.0 kg 9 Ring shank nails, A stainless, lens head Dimension Pcs/box Box/pallet ZE /0 80,90.7 kg 9 ZE /0 8,90.77 kg 9 ZE / 8,00. kg 9 ZE /7* 87,00.7 kg 9 Ring shank nails, A lens head Dimension Pcs/box Box/pallet ZE /0 80,90.77 kg 9 ZE / 8,00. kg 9 Decra ring shank nails with full head Dimension Pcs/box Box/pallet ZE /0 black 8,90.0 kg 9 ZE /0 red 8,90.0 kg 9 Drywall, ring shank nails with full head Dimension Pcs/box Box/pallet ZE / 8,00. kg 9 ZE / 8,90.9 kg 9 * Only fits Duo-Fast CNP 7 All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless Tel. + 97
26 Coil Nailers TJEP PC Also for CN nails (see page 9) TJEP PC 90 Also for CN nails (see page 9) Only kg! Only kg! Single shot or bump fire Single shot or bump fire Adjustable air exhaust Adjustable magazine bottom L: - mm Ø:,. mm PC nails, p. 7 CN nails, p. 9 Belt hook Adjustable depth control No-mark pad Rubber safety cap PC nails, p. 7 CN nails, p. 9 L: - 90 mm Ø:. -. mm Adjustable depth control No-mark pad Belt hook Rubber safety cap 000 EAN no mm Air consumption per cycle. litres 8 x 8 x 0 mm.0 kg Air tool lube X-R 00 ml 09 outside siding, panelling, pallets, boarding 0007 EAN no mm Air consumption per cycle.9 litres x x 7 mm.00 kg Air tool lube X-R 00 ml 09 outside siding, panelling, pallets, boarding, decking
27 Coil Nailers TJEP PC nails PC nails fit TJEP PC, PC, PC 90 MAX CN, HN 90, HN 7, HN Haubold RCN 90B, RCN Senco SCN 9, SCN, SCN 7 Ring shank nails with full head Dimension Pcs/box Box/pallet PC /8 8908,00. kg 8 PC /0 890,00. kg 8 PC / 890,00. kg 8 PC 8/ 890,00. kg 8 PC 8/7 8907,00. kg 8 PC 8/ ,00 7. kg 8 Ring shank nails, A stainless, flat head Dimension Pcs/box Box/pallet PC / 89,00.80 kg 8 PC / 89,00. kg 8 PC /7 897,00.7 kg 8 Ring shank nails, A stainless, lens head Dimension Pcs/box Box/pallet PC /0* 890,00.80 kg 8 PC /* 89,00. kg 8 PC /7* 897,00.7 kg 8 * Do not fit PC 90 All TJEP nails for bearing structures manufactured after August 00 are CE-marked and meet the requirements of Eurocode and standard 9. Bright Galv. Galv., μ HDG Stainless Tel
28 Coil Nailers TJEP CN 7 TJEP CN 70 Industrial nailers Adjustable air exhaust Robust magazine Non-slip grip / less hand fatigue L: - 7 mm L: - 70 mm 00-0 shots before reload Ø:. -. mm Ø:. -.9 mm Rubber safety cap CN nails, p. 9 CN nails, p. 9 Supplied with bump fire trigger Robust magazine Non-slip grip / less hand fatigue - 00 shots before reload Rubber safety cap 000 EAN no mm Air consumption per cycle.8 litres 0 x x 8 mm.0 kg Air tool lube X-R 00 ml 09 pallets, packaging 0008 EAN no mm Air consumption per cycle.9 litres 07 x x 7 mm.0 kg Air tool lube X-R 00 ml pallets, packaging Suitable for mounting on automated fastening systems 8
29 Coil Nailers TJEP CN 00 EPAL TJEP CN nails Industrial nailer Always approx. 0 dimensions of CN nails in stock Diameter.8 -. mm / length 9-00 mm CN nails, p. 9 L: 90 mm Ø:. -. mm Downwards exhaust Robust magazine Well-balanced with string-relief Silencer Non-slip grip / less hand fatigue Rubber safety cap CN nails fit TJEP CN 7, CN 70, CN 00 EPAL, TS, PC, PC 90 Paslode P-0C, P-7C, CNW70, CNW90 Senco SCN0, SCN, SCN7, SCN MAX MCN, CN, CN 70, MCN 80, MCN 890, HN 90, HN 7 Haubold RCN 90B, RCN 007 EAN no mm Air consumption per cycle.0 litres 9 x x 8 mm. kg Air tool lube X-R 00 ml 09 pallets Examples of CN ring shank nails with full head Dimension Pcs/box Box/pallet CN /0,800. kg 0 CN /,700.8 kg 0 CN /0 0,00. kg 0 CN /,00 7. kg 0 CN /0 0,00.7 kg 0 CN /0 9, kg 0 CN / 7 7, kg 0 CN 8/70 7,000. kg 0 CN 8/7 7,00 7. kg CN /90 9,000. kg 0 CN /90 99, kg 0 Bright Galv. Galv., μ HDG Stainless Tel
30 Did you know that is optimised for PC s, mobile phones and tablets (ipad)? Scan the code and visit with your 0 mobile phone or tablet (ipad)
31 Haften Nailers Nailers TJEP HA- GAS G... TJEP PC Haften... Fasteners TJEP HA nails... TJEP PC nails... Tel. + 97
32 Haften Nailers TJEP HA- GAS G NEW TJEP HA haften nails New 0 model Slim design freedom of movement New air filter, less maintenance HA nails, p. L: - mm Ø:.8 mm Smooth no-mark nose Adjustable depth control Rubber pad anti-skid Belt hook Non-slip grip Top load 0088 EAN no mm 7 x 7 x 09 mm incl. battery. kg Supplied with batteries and charger in plastic case. HA haften nails fit TJEP HA GAS G Paslode IM 00 A/ HAFTE Stainless A Dimension Pcs/box Box/carton HA 8/ kg 0 TJEP fuel cell, 78 mm, yellow ring 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 haften, tin roofs, zinc sheathing, covering Bright Galv. Galv., μ HDG Stainless
33 Haften Nailers TJEP PC Haften TJEP PC haften nails L: - mm Ø:. mm PC nails, p. 7 and Single shot or bump fire Adjustable air exhaust Belt hook Adjustable depth control No-mar pad Rubber safety cap 000 EAN no mm Air consumption per cycle. litres 8 x 8 x 0 mm.0 kg Air tool lube X-R 00 ml 09 PC nails fit TJEP MAX Haubold PC Haften CN 0G, CN R RCN 0 S/W Ring shank nails with full head Dimension Pcs/box Box/pallet PC / 8980,00.70 kg 00 PC / 8980,00.7 kg 00 Also for PC nails up to mm (see page 7) haften, tin roofs, zinc sheathing, covering Bright Galv. Galv., μ HDG Stainless Tel. + 97
34 Did you know that at you can see the latest news and products? Scan the code and visit with your mobile phone or tablet (ipad)
35 Corrugated Nailers Nailers TJEP CO-... Fasteners TJEP CO nails... Tel. + 97
36 Corrugated Nailers TJEP CO- TJEP CO corrugated nails 0 L: mm W: mm CO nails, p. Robust Powerful Adjustable air exhaust Single shot or bump fire 00 EAN no mm Air consumption per cycle. litres 0 x 8 x 8 mm. kg CO corrugated nails fit TJEP CO- Senco F C CO corrugated nails Dimension Pcs/box Box/pallet CO / ,00.80 kg 90 Air tool lube X-R 00 ml 09 corner jointing, raftering Bright Galv. Galv., μ HDG Stainless
37 Corrugated Nailers Concrete Nailers Nailers TJEP CP-0 GAS G... 8 TJEP CP Fasteners TJEP CP concrete pins... 9 TJEP ST-/0 finish nailer for concrete, see page Tel
38 Concrete Nailers TJEP CP-0 GAS G New 0 model New handle, better support New air filter, less maintenance New safety bracket, improved trigger Magnetic ring on nose for easier mounting Introduced in spring 0 - Full function down to - c with all-season fuel cell (008) CP nails, p. 9 0 L: - 0 mm Ø:. -.0 mm Adjustable depth control Support bracket Non-slip grip Rafter/belt hook Rubber cap protection Quick open of nose if nail trapped 008 EAN no mm 8 x 8 x 7 mm incl. battery.80 kg Supplied with batteries and charger in plastic case. TJEP fuel cell, mm, orange ring 008 TJEP all-season fuel cell, mm, red ring (- c) 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP Battery,. Ah NiMh 0080 concrete, drywall steel rails 8
39 Concrete Nailers TJEP CP-0 NEW TJEP CP concrete pins Introduced in spring 0 CP nails, p. 9 0 L: - 0 mm Ø:. -.0 mm Adjustable depth control Support bracket Non-slip grip Rafter/belt hook Quick open of nose if nail trapped 00 EAN no mm Air consumption per cycle.0 litres 7 x 0 x 0 mm.0 kg Air tool lube X-R 00 ml 09 concrete, drywall steel rails CP concrete pins fit TJEP CP-0 GAS, CP-0 Spit Pulsa 700 P, Pulsa 700 E, Pulsa 000 Senco SPA 0 Smooth shank concrete pins for concrete Dimension Pcs/box Box/carton CP / kg 0 CP / kg 0 CP / kg 0 CP / kg 0 CP / kg 0 CP / kg 0 Steppoint concrete pins for concrete and steel Dimension Pcs/box Box/carton CP 0/ kg 0 CP 0/ kg 0 CP 0/ kg 0 CP 0/ kg 0 CP 0/ kg 0 Galv. Mech. galv. Tel
40 Did you know that at you can find technical data and manuals for the various nailers? Scan the code and visit with your 0 mobile phone or tablet (ipad)
41 Brad and Finish Nailers Nailers TJEP TF-8/0... TJEP TF-8/... TJEP F-8/0... TJEP TF-8/0 GAS G... TJEP TF-8/... TJEP VD-8/0... TJEP VF-/ GAS G... TJEP TF-/ TJEP F-/ TJEP TF-/0F... 8 TJEP TF-/B... 8 TJEP TF-/ GAS G... 9 TJEP AB TJEP AB-/ TJEP AB-/ GAS... TJEP VD-/0... TJEP ST-/0... TJEP TT-... Fasteners TJEP TF-8... TJEP VD-8... TJEP VF-... TJEP TF TJEP AB-... TJEP VD-... TJEP ST-0... TJEP TT... Tel. + 97
42 Brad and Finish Nailers TJEP TF-8/0 TJEP TF-8/. mm brads. mm brads For mounting hidden glazing beads Only weighs. kg! Rubber rollers protect the glass Safety bracket integrated in nose Adjustable angle No-mark pad 0 L: - 0 mm Ø:. mm Special safety bracket Precise insertion into groove Adjustable depth control 0 L: - mm Ø:. mm Exhaust in bottom cover Adjustable depth control Belt hook TF-8 brads, p. Empty magazine indicator TF-8 brads, p. Dry fire lock-out 000 EAN no , 9,, 0,, 8, 0 mm Air consumption per cycle.0 litres 8 x 8 x mm.8 kg Air tool lube X-R 00 ml 09 glazing beads 00 EAN no ,, 9,,, 8, mm Air consumption per cycle 0. litres 7 x x 7 mm.0 kg Air tool lube X-R 00 ml 09 glazing beads, secret fixing, panelling, cabinets, displays
43 Brad and Finish Nailers TJEP F-8/0 TJEP TF-8/0 GAS G. mm brads. mm brads New 0 model New handle, better support New air filter, less maintenance Adjustable air exhaust Quick open of nose if nail trapped Single shot or bump fire Adjustable depth control 0 L: - 0 mm Ø:. mm No-mark pad Adjustable depth control Empty magazine indicator 0 L: - 0 mm Ø:. mm No-mark pad Rear two-step loading Belt hook TF-8 brads, p. TF-8 brads, p. Empty magazine indicator 009 EAN no , 9,,, 8, 0, 0 mm Air consumption per cycle.0 litres 0 x x mm.0 kg Air tool lube X-R 00 ml 09 glazing beads, secret fixing, panelling, cabinets, displays 008 EAN no , 9,,, 8, 0,, 0 mm x 8 x 7 mm incl. battery. kg Supplied with soft no-mark nose, batteries and charger in plastic case. TJEP fuel cell, 78 mm, yellow ring 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 glazing beads, secret fixing, panelling, cabinets, display Tel. + 97
44 Brad and Finish Nailers TJEP TF-8/ TJEP TF-8 brads, 0. mm brads NEW. mm brads TF-8 brads fit 0 L: - mm Ø:. mm TF-8 brads, p. Safety bracket integrated in nose Adjustable air exhaust Adjustable depth control Integrated no-mark pad Belt hook Dry fire lock-out 008 EAN no mm Air consumption per cycle.0 litres x 8 x mm.0 kg Air tool lube X-R 00 ml 09 glazing beads, secret fixing, panelling, cabinets, displays TJEP TF-8/, F-8/0, TF-8/0 GAS, 90/F-8, TF-8/0 Paslode TFN 8/F-8, TFN 80/F-8, ZE BP, IMP 0 F-8, IMP00 F-8, FNS80 Duo-Fast K0 Senco SCP 0, FP 8, CF Dewalt D8K MAX 0,, NF/F-8 Dimension Pcs/box Box/carton TF-8, mm 80, kg 0 TF-8, mm 80, kg 0 TF-8, 9 mm 809, kg TF-8, mm 80, kg TF-8, mm 80,000.0 kg TF-8, 0 mm 800,000.0 kg TF-8, mm 80,000. kg TF-8, mm 80,000.7 kg 8 TF-8, 8 mm 808, kg 8 TF-8, 0 mm 800,000.8 kg 8 TF-8, mm 80, kg 8 TF-8, 0 mm 800,000. kg 8 Stainless A Dimension Pcs/box Box/carton TF-8, mm 80, kg 0 TF-8, 9 mm 80, kg TF-8, mm 80, kg TF-8, mm 80,000.0 kg TF-8, 0 mm 80,000. kg TF-8, mm 80,000. kg TF-8, 8mm 809,000.0 kg 8 Bright Galv. Galv., μ HDG Stainless
45 Brad and Finish Nailers TJEP VD-8/0 TJEP VD-8 brads,. mm brads. mm brads L: 0-0 mm Ø:. mm VD-8 brads, p. Safety bracket integrated in nose Belt hook Adjustable air exhaust No-mark pad Dry fire lock-out Easy access in narrow corners 007 EAN no mm Air consumption per cycle.0 litres 7 x 8 x mm.8 kg VD-8 brads fit TJEP VD-8/0 Paslode FN 80 A Dimension Pcs/box Box/carton VD-8, 0mm 80, kg VD-8, mm 8,000.0 kg VD-8, mm 8,000.0 kg 0 VD-8, 8mm 88, kg 0 VD-8, mm 8,000.0 kg 8 VD-8, 0mm 80,000. kg 8 Air tool lube X-R 00 ml 09 glazing beads, secret fixing, panelling, cabinets, displays Bright Galv. Galv., μ HDG Stainless Tel. + 97
46 Brad and Finish Nailers TJEP VF-/ GAS G TJEP VF- finish nails, 0. mm finish nails. mm finish nails New 0 model New handle, better support New air filter, less maintenance New safety bracket, improved trigger 0 L: - mm Ø:. mm VF- finish nails, s. Quick open of nose if nail trapped Adjustable depth control Rear two-step loading Belt hook No-mark pad 0089 EAN no mm x 8 x 7 mm incl. battery. kg Supplied with batteries and charger in plastic case. TJEP fuel cell, 78 mm, yellow ring 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 VF- finish nails fit TJEP VF-/ GAS Paslode FN A, IMP 0A, IM ABF Dewalt DC8KB, DC8KN Dimension Pcs/box Box/carton VF-, mm 8, kg VF-, 8mm 88,000.8 kg VF-, mm 8,000.8 kg VF-, mm 8,000. kg 8 VF-, mm 8,000.0 kg 8 A Stainless Dimension Pcs/box Box/carton VF-, mm 8, kg VF-, 8mm 89,000.8 kg VF-, mm 8,000. kg 8 wood ceiling, coving, dado, skirting Bright Galv. Galv., μ HDG Stainless
47 Brad and Finish Nailers TJEP TF-/8 TJEP F-/0. mm finish nails. mm finish nails Only weighs. kg! Safety bracket integrated in nose Empty magazine indicator Dry fire lock-out Adjustable air exhaust 0 L: 9-8 mm Ø:. mm No-mark pad Belt hook Exhaust in bottom cover 0 L: - 0 mm Ø:. mm No-mark pad Adjustable depth control Quick open of nose if nail trapped TF- finish nails, s. 9 Adjustable depth control TF- finish nails, s. 9 Single shot or bump fire 00 EAN no ,,, 8 mm Air consumption per cycle 0. litres 7 x x 7 mm.0 kg Air tool lube X-R 00 ml 09 wood ceiling, coving, dado, skirting, glazing beads EAN no. 7000, 9,,, 8,, 0 mm Air consumption per cycle.0 litres x x 7 mm. kg Air tool lube X-R 00 ml 09 wood ceiling, coving, dado, skirting, glazing beads Tel
48 Brad and Finish Nailers TJEP TF-/0F TJEP TF-/B. mm finish nails. mm finish nails Safety bracket integrated in nose Dry fire lock-out Silencer exhaust Adjustable air exhaust 0 L: - 0 mm Ø:. mm Adjustable air exhaust Adjustable depth control Dry fire lock-out 0 L: 9 - mm Ø:. mm Adjustable depth control Non-slip grip Two no-mark pads (diff. lengths) TF- finish nails, s. 9 No-mark pad TF- finish nails, s. 9 Safety bracket integrated in nose 00 EAN no. 7000, 9,,, 8,, 0 mm Air consumption per cycle.0 litres x 8 x mm.0 kg Air tool lube X-R 00 ml 09 wood ceiling, coving, dado, skirting, glazing beads 007 EAN no ,,, 8,, 0, mm Air consumption per cycle. litres 79 x 8 x 8 mm.0 kg Air tool lube X-R 00 ml 09 wood ceiling, coving, dado, skirting, glazing beads 8
49 Brad and Finish Nailers TJEP TF-/ GAS G TJEP TF- finish nails, 0. mm finish nails. mm finish nails New 0 model New handle, better support New air filter, less maintenance New safety bracket, improved trigger 0 L: 8 - mm Ø:. mm TF- finish nails, s. 9 Quick open of nose if nail trapped No-mark pad Belt hook Rear two-step loading Adjustable depth control TF- finish nails fit TJEP TF-/ GAS, TF-/0F, TF-/B, F-/0, TF-/8 Paslode FN., FN, 0 F-, FN0, Impulse IMP F-, Impulse 0CT Senco SLP 0, FP, CF, S00 SM Dewalt D7K, DC KB 008 EAN no mm x 8 x 7 mm incl. battery. kg Supplied with batteries and charger in plastic case. TJEP fuel cell, 78 mm, yellow ring 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 wood ceiling, coving, dado, skirting Dimension Pcs/box Box/carton TF-, 9 mm 89,000. kg 8 TF-, mm 8,000.0 kg 8 TF-, mm 8,000. kg TF-, 8 mm 88,00.9 kg 8 TF-, mm 8,00.97 kg 8 TF-, 0 mm 80,00.8 kg 8 TF-, mm 8,00.8 kg Stainless A Dimension Pcs/box Box/carton TF-, 8 mm 88,000.0 kg 8 TF-, mm 8,000.7 kg 8 TF-, mm 8,000.0 kg 8 TF-, mm 8,000. kg TF-, 8 mm 89,00.9 kg 8 TF-, 0 mm 8,00.97 kg 8 Bright Galv. Galv., μ HDG Stainless Tel
50 Brad and Finish Nailers TJEP AB- TJEP AB-/0.8 mm finish nails.8 mm finish nails Compact and light for DA brads For DA brads Compact and light only. kg Adjustable air exhaust Adjustable depth control Rear two-step loading Safety bracket integrated in nose L: - mm Ø:.8 mm No-mark pad Quick open of nose if nail trapped Non-slip grip L: - 0 mm Ø:.8 mm No-mark pad Exhaust in bottom cover Non-slip grip AB- finish nails, s. AB- finish nails, s. Rear two-step loading 00 EAN no mm Air consumption per cycle. litres 9 x 8 x mm.9 kg Glass protection plate 80 Air tool lube X-R 00 ml 09 wood ceiling, coving, dado, skirting, glazing beads 00 EAN no mm Air consumption per cycle.0 litres 0 x 7 x 8 mm.0 kg Glass protection plate 8708 Air tool lube X-R 00 ml 09 rustic ceiling, coving, skirting, covering, glazing beads 0
51 Brad and Finish Nailers TJEP AB-/ GAS TJEP AB- finish nails,.8 mm finish nails.8 mm finish nails For DA brads Ideal for stainless lens head nails! L: - mm Ø:.8 mm AB- finish nails, s. No-mark pad Adjustable depth control Quick open of nose if nail trapped Non-slip grip Belt hook Rear two-step loading 008 EAN no mm x x 0 mm incl. battery. kg Supplied with additional no-mark nose for siding, batteries and charger in plastic case. TJEP fuel cell, 78 mm, yellow ring 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 AB- finish nails (DA brads) fit TJEP AB-/ GAS, AB-/0, AB- Paslode 0 AB-, FNA Senco SFN 0, FP XP, FP, GT DA GAS Dewalt D7K Dimension Pcs/box Box/carton AB-, mm 8,000.0 kg AB-, mm 8,000.9 kg AB-, 8 mm 88,000. kg AB-, mm 8, kg AB-, 0 mm 80,000.8 kg AB-, mm 8,000.7 kg Stainless A, lens head Dimension Pcs/box Box/carton AB-, mm 8,000.0 kg AB-, mm 8,000.9 kg AB-, 8 mm 89,000. kg AB-, 0 mm 8,000.0 kg wood ceiling, panels, frames, glazing beads Bright Galv. Galv., μ HDG Stainless Tel. + 97
52 Brad and Finish Nailers TJEP VD-/0 TJEP VD- finish nails,.8 mm finish nails.8 mm finish nails L: - 0 mm Ø:.8 mm VD- finish nails, s. Safety bracket integrated in nose Adjustable air exhaust Dry fire lock-out No-mark pad Adjustable depth control 00 EAN no mm Air consumption per cycle.0 litres 7 x 8 x mm.8 kg Air tool lube X-R 00 ml 09 wood ceiling, coving, dado, skirting, architraves, glazing beads VD- finish nails fit TJEP VD-/0 Paslode FN0A Dimension Pcs/box Box/carton VD-, mm 87, kg VD-, mm 87,000.7 kg VD-, 8mm 878,000.0 kg VD-, mm 87,000.0 kg VD-, 0mm 870,000. kg Stainless A Dimension Pcs/box Box/carton VD-, mm 87, kg VD-, mm 87,000.7 kg VD-, 8mm 879,000.0 kg VD-, 0mm 87,000. kg Bright Galv. Galv., μ HDG Stainless
53 Brad and Finish Nailers TJEP ST-/0 TJEP ST-0 finish nails, 0.8 mm finish nails.8 mm finish nails For bricks and concrete Hardened steel nails for concrete 0 L: - 0 mm Ø:.8 mm ST-0 finish nails, s. Safety bracket integrated in nose No-mark pad Exhaust in bottom cover Adjustable depth control Non-slip grip Dry fire lock-out 00 EAN no mm Air consumption per cycle. litres 7 x 7 x mm.0 kg Air tool lube X-R 00 ml 09 wood ceiling, coving, dado, skirting, architraves, glazing beads ST-0 finish nails fit TJEP ST-/0, ST-0 Paslode FN0C Dimension Pcs/box Box/carton ST-0, 8mm* 88, kg 0 ST-0, 0mm 80,000.9 kg 0 ST-0, mm 8,000.9 kg 0 ST-0, 0mm 80, kg 0 ST-0, mm* 8,00.0 kg 0 ST-0, 0mm 80,00.0 kg 0 ST-0, 0mm 80,00.0 kg 0 Assortment with various lenghts Dimension Pcs/box Box/carton Assortment 0,00. kg 0 00 pcs. of each length:, 0,, 0, 0, 0 mm * only for TJEP ST-0 Bright Galv. Galv., μ HDG Stainless Tel. + 97
54 Brad and Finish Nailers TJEP TT- TJEP TT finish nails, 0. mm finish nails. mm finish nails 0 L: mm Ø:. mm TT finish nails, s. Adjustable air exhaust Dry fire lock-out Side load Extra nose piece for tongue, TT finish nails fit TJEP TT- Senco T-nailer Dimension Pcs/box Box/pallet TT.x 0,000.9 kg EAN no mm Air consumption per cycle.8 litres 8 x 9 x 9 mm.80 kg Air tool lube X-R 00 ml 09 flooring Always follow the directions of the flooring supplier when selecting nails, finish nails or staples for mounting floor boards Bright Galv. Galv., μ HDG Stainless
55 Brad and Finish Nailers Staplers Staplers TJEP PG-0/... TJEP 80/... 7 TJEP 80/ auto... 7 TJEP 90/ TJEP 90/F TJEP BE-90/ TJEP BN-90/ TJEP ES-00/0... TJEP PZ-/0... TJEP PQZ-... TJEP PQZ-7 GAS G... TJEP MF-/0... TJEP TW-/8... Fasteners TJEP PG-0... TJEP BE TJEP BE TJEP ES TJEP PZ-... TJEP PQ-... TJEP MF-... TJEP TW-... Tel. + 97
56 Staplers TJEP PG-0/ TJEP PG-0 staples Flat wire staples ideal for foil. mm - mm Adjustable air exhaust Bottom load PG-0 staples fit TJEP PG-0/, DF-0/ Duo-Fast CS 000 Wire thickness. x 0. mm PG-0 staples, p. 008 EAN no Air consumption per cycle - mm 0. litres x x mm 0.90 kg Dimension Pcs/box Box/carton PG-0, mm 80 9, kg 0 PG-0, 8 mm 808 7, kg 0 PG-0, 0 mm 80, kg 0 PG-0, mm 8, kg 0 PG-0, mm 8, kg 0 Air tool lube X-R 00 ml 09 foil, cardboard, weather strips, vapour barriers, upholstery Bright Galv. Galv., μ HDG Stainless
57 Staplers TJEP 80/ TJEP BE-80 staples.8 mm Long slim nose BE-80 staples fit - mm Bottom load Non-slip grip TJEP 80/, 80/ auto Wire thickness 0.9 x 0.7 mm BE-80 staples, p EAN no Air consumption per cycle - mm 0. litres x x 0 mm 0.90 kg Dimension Pcs/box Box/carton BE-80, mm 80,000.0 kg 0 BE-80, 8 mm 808 9, kg 0 BE-80, 0 mm 80 7,00.00 kg 0 BE-80, mm 8, kg 0 BE-80, mm 8, kg 0 BE-80, mm 8, kg 0 vapour barriers, plastic, foil, weather strips, cardboard, upholstery Bright Galv. Galv., μ HDG Stainless Tel
58 Staplers TJEP 90/0 TJEP 90/F-8 nailers in.8 mm.8 mm Wire thickness. x.0 mm - 0 mm - 0 mm Adjustable air exhaust Adjustable air exhaust Wire thickness. x.0 mm BE-90 staples, p. 0 Single shot or bump fire Bottom load Adjustable depth control No-mark pad Empty magazine indicator 0 L: - 0 mm Ø:. mm BE-90 staples, p. 0 TF-8 brads, p. Single shot or bump fire Adjustable depth control Empty magazine indicator Quick open of nose if nail trapped No-mark pad 0090 EAN no mm Air consumption per cycle.0 litres x x 7 mm. kg Air tool lube X-R 00 ml 09 fillets, boarding, frames 008 EAN no ,, 9,, 0,, 0, 0 mm Air consumption per cycle.0 litres x x 7 mm. kg Air tool lube X-R 00 ml 09 fillets, boarding, frames 8
59 Staplers TJEP BE-90/0 NEW Very powerful!,8 mm Introduced spring 0 Wire thickness, x,0 mm - 0 mm BE-90 staples, p. 0 Exhaust in bottom cover Suitable for rear grooves Adjustable depth control Dry fire lock-out Safety bracket integrated in nose 009 TUN nr. 000 EAN no mm Air consumption per cycle, litres 7 x 7 x mm,70 kg TUN nr. Air tool lube X-R 00 ml wood ceiling, fillets, backing, boarding, frames Tel
60 Staplers TJEP BN-90/0 TJEP BE-90 staples.8 mm Ideal for hidden nailing of rustic boards in rear groove Wire thickness. x.0 mm - 0 mm BE-90 staples, p EAN no mm Air consumption per cycle 0. litres x x 8 mm. kg Air tool lube X-R 00 ml 09 wood ceiling, fillets, backing, boarding, frames Exhaust in bottom cover Suitable for rear grooves Adjustable depth control Dry fire lock-out Safety bracket integrated in nose BE-90 staples fit TJEP 90/F-8, 90/0, BN-90/0 Paslode MDS 80 Senco SLS 0 stapler Haubold PN 00 L Dimension Pcs/box Box/carton BE-90, mm 80 8, kg BE-90, 8 mm 808,000.9 kg BE-90, mm 80, kg BE-90, 0 mm 800,00.8 kg BE-90, mm 80,000.8 kg BE-90, 0 mm 800,00.7 kg A stainless Dimension Pcs/box Box/carton BE-90, 0 mm 80,00.8 kg BE-90, mm 80,000.8 kg BE-90, 0 mm 80,00.7 kg Bright Galv. Galv., μ HDG Stainless 0
61 Staplers TJEP ES-00/0 TJEP ES-00 staples 0.8 mm Wire thickness. x.0 mm ES-00 staples, p. 008 EAN no Air consumption per cycle 0-0 mm Belt hook Silencer Adjustable air exhaust Adjustable depth control Dry fire lock-out No-mark pad 0-0 mm. litres x 7 x mm.0 kg ES-00 staples fit TJEP ES-00/0 Haubold PN 0 L Dimension Pcs/box Box/carton ES-00, 0 mm 870,00.8 kg ES-00, mm 87,000. kg ES-00, 0 mm 870,00.8 kg ES-00, mm 87,000. kg ES-00, 0 mm 870,000.9 kg Air tool lube X-R 00 ml 09 fillets, boarding, ceiling, frames, fence, wire Bright Galv. Galv., μ HDG Stainless Tel. + 97
62 Staplers TJEP PZ-/0 Perfect for Fermacell boarding and floor boarding TJEP PQZ- 0.8 mm PQ:. mm PZ: 0.8 mm For PQ as well as PZ staples up to mm! - 0 mm Quick open of nose if nail trapped Incl. special nose for flooring - mm Adjustable air exhaust Quick open of nose if nail trapped Wire thickness. x. mm Adjustable depth control Top load Wire thickness PQ:.9 x.7 mm PZ:. x. mm Top load Incl. special nose for flooring PZ- staples, p. PZ- and PQ- staples, p EAN no mm Air consumption per cycle. litres x 87 x 9 mm.0 kg Air tool lube X-R 00 ml 09 flooring, boarding, wire 0097 EAN no mm Air consumption per cycle.7 litres x 0 x mm.8 kg Air tool lube X-R 00 ml 09 flooring, boarding, Fermacell, wire Always follow the directions of the flooring supplier when selecting nails, finish nails or staples for mounting floor boards
63 Staplers TJEP PQZ-7 GAS G NEW For PQ as well as PZ staples up to 7 mm! - Full function down to - c with all-season fuel cell (008) PQ:. mm PZ: 0.8 mm Wire thickness PQ:.9 x.7 mm PZ:. x. mm PZ- and PQ- staples, p. - 7 mm Great balance Non-slip grip extremely low recoil Adjustable depth control Top load Smooth no-mark nose Belt hook New 0 model New handle, better support New air filter, less maintenance New safety bracket, improved trigger Mounting of Fermacell Choose the right staple and stapler for the task! 008 EAN no mm 7 x 08 x mm incl. battery.80 kg Supplied with batteries and charger in plastic case. TJEP fuel cell, mm, orange ring 008 TJEP all-season fuel cell, mm, red ring (- c) 008 TJEP battery,. Ah NiMh 008 TJEP charger for TJEP battery,. Ah NiMh 0080 boarding, flooring, Fermacell TJEP PZ-/0 TJEP PQZ- TJEP PQZ-7 GAS Staplers Construction Staple type PZ-/0 PQZ- PQZ-7 GAS ( 0099) ( 0097) Mounting Fermacell (FC) on Fermacell and Fermacell on wood 0 mm FC on 0 mm FC 808 Tjep PZ- 9 mm galv. 0 mm FC on. mm FC 808 Tjep. mm FC on. mm FC 80 Tjep mm FC on mm FC 807 Tjep 8 mm FC on 8 mm FC 80 Tjep PZ- 0 mm FC on wood 80 Tjep PZ-. mm FC on wood 808 Tjep PZ- mm FC on wood 80 Tjep PZ- 8 mm FC on wood 800 Tjep PZ- x 0 mm FC on wood (nd layer in sub-construction) 80 Tjep PZ- x, mm FC on wood (nd layer in sub-construction) 800 Tjep PZ- x mm FC on wood (nd layer in sub-construction 80 Tjep PZ- 0 mm FC on wood (static) 80 Tjep PZ-. mm FC on wood (static) 80 Tjep PZ- mm FC on wood (static) 80 Tjep PZ- 8 mm FC on wood (static) 80 Tjep PZ- Mounting Fermacell floor elements = 0 mm (total) floor element 808 TJEP PZ galv. 0 mm (total) floor element 80 TJEP PZ Mounting Fermacell PowerPanel HD on wood mm FC PowerPanel HD 80 TJEP PZ- mm galv. C X mm FC PowerPanel HD 80 TJEP PZ- Mounting Fermacell PowerPanel HO floor element mm (total) PowerPanel HO 80 TJEP PZ- galv. Mounting Fermacell PowerPanel HO on wood. mm FC PowerPanel HO 808 TJEP PZ- 8 mm galv.. mm FC PowerPanel HO 809 TJEP PZ- 8 mm CD PZ- 9 mm galv. X CD PZ- mm galv. X CD PZ- 8 mm galv. X CD mm galv. X CD mm X galv. C X 8 mm X galv. C X mm X galv. C X 0 mm X X galv. C X mm galv. X X C X 0 mm galv. X X C X mm galv. X X C X mm galv. C *) X X mm galv. X X C *) X mm galv. X X C *) X mm galv. C *) X X X X 9 mm X CD mm galv. X CD X mm rustfri C X X mm X CD X C X rustfri C X X X X X ( 008) X X C X X C : Regular standard point CD : The staple is bent when penetrating the material *) The - mm C-staples listed meet the applicable requirements for bearing constructions. Further data for mounting are found at Stapler data are found at _99_PM_UK-UK Tel. + 97
64 Staplers TJEP PZ- staples TJEP PQ- staples 0,8 mm, mm Chisel-diverted (CD) PZ- staples fit Wire thickness, x, mm Wire thickness,9 x,7 mm PQ- staples fit TJEP PZ-/0, PQZ-, PQZ-7 GAS, PZ-/ Senco SKS, SLS, SNS TJEP PQZ-, PQZ-7 GAS Senco SQS Dimension Pcs/box Box/pallet PZ-, mm 80,00 0. kg 7 PZ-, mm 80,000.8 kg 7 PZ-, 8 mm 808 9,00.9 kg 7 PZ-, mm 80 8,000.0 kg 7 PZ-, 0 mm 800, kg 7 PZ-, mm 80,000.9 kg 7 Dimension Pcs/box Box/pallet PQ-, 8 mm 808 9,00. kg 7 PQ-, mm 80 7,00.00 kg PQ-, 0 mm 800 7,0.0 kg PQ-, 7 mm 807,0.0 kg 7 PQ-, mm 80,70.0 kg PQ-, 7 mm 807,700.0 kg 7 A stainless Dimension Pcs/box Box/pallet PZ-, 8 mm 809,000.9 kg PZ-, 0 mm 80, kg 8 PZ-, mm 80,000.0 kg Chisel-diverted (CD) Dimension Pcs/box Box/pallet PZ-, 9 mm 808 7,00.70 kg PZ-, mm 80 7,00.80 kg 7 PZ-, 8 mm 807,000.0 kg PZ-, mm 80 0, kg Bright Galv. Galv., μ HDG Stainless
65 Staplers TJEP MF-/0 TJEP MF- staples 7 mm Wire thickness. x EAN no Air consumption per cycle - 0 mm Robust gun Adjustable air exhaust Adjustable depth control Quick open of nose if nail trapped Non-slip grip - 0 mm. litres 70 x 0 x 00 mm.00 kg MF- staples fit Tjep MF-/0 Haubold PN 90 D Dimension Pcs/box Box/pallet MF-, 0 mm 8890, kg A stainless Dimension Pcs/box Box/pallet MF-, 7 mm 887,00 0. kg MF-, 00 mm 889, kg MF-, 0 mm 8898, kg Air tool lube X-R 00 ml 09 insulation board Tel. + 97
66 Staplers TJEP TW-/8 TJEP TW- staples. mm 009 EAN no Air consumption per cycle - 8 mm Wire thickness. x. TW- staples, p. Robust gun Adjustable support Top load Non-slip grip - 8 mm. litres 7 x 88 x 70 mm.07 kg TW- staples fit TJEP TW-/8 Senco WC 0 XP Dimension Pcs/box Box/pallet TW-, mm 8 9, kg 7 TW-, mm 8 7,0 7.0 kg 7 TW-, mm 8, kg 7 TW-, mm 8,0.98 kg 8 TW-, 8 mm 88, kg 7 Air tool lube X-R 00 ml 09 cardboard, fillets, boarding, packaging Bright Galv. Galv., μ HDG Stainless
67 Staplers Repair and service Tel
68 Repair and service Maintenance of nailers TJEP nailers are made of first-grade materials and under strict control in order to ensure many years of trouble-free use. However, professional service and maintenance are necessary to maintain smooth and effective operation at the building site. For almost 0 years, our TJEP service centre has been repairing pneumatic and GAS nailers from a wide range of maufacturers, such as TJEP, Paslode, DUO-FAST and MAX. This has given us great experience in all issues you might experience with a nailer. Use your authorized TJEP service shop Benefit from 7 highly experienced technicians More than,00 different spare parts in stock Service and repair of TJEP, Paslode and selected models from MAX and DUO-FAST Service and repair within hours excl. transportation. Please send your nailer to: Kyocera Unimerco Fastening AS Drejervej DK-7 Sunds Tel.: + 97 Fax: tjep@unimerco.com 8
69 Repair and service Conversion Table Type TJEP nails Page strip nails GF Full head GR D-head strip nails Anchor nails DE Decra BC Anchor nails KA Anchor nails FH Full head TA Wire-collated Former name 8 GN 9 GN Fits: TJEP nailers Page Paslode GRF /90 GAS GRF /0 GAS GRF /90 GRF /00 GRF 00 Compact XP GRF /90 GAS GRF /0 GAS GRF 00 Compact XP GRF /90 GRF /00 8 DE GRF /90 GAS BC 0 BS 0 - KA 00 GAS KA- KA-L KA- FH /90 GAS FH 0 FH 0 FH / PSN98 PSN00 F-00 F-0 IM 0/90 IM 90i IM 00i PSN98 PSN00 F-00 F-0 IM 0/90 IM 0/80 IM 90i IM 00i IM 0/90 IM 0/80 IM 90i BS 00 PSN 0NP F0S-PP Duo-Fast Haubold Senco Others CN 00 CN 0 NSP 0 F SN 90 D RN 0 R TP TP 7/ RNC R RNC 0 M FP SP 80 SN 9 XP SN 88 GT 90 CH MC 0 Pro-BS 00 SP 800 SN 0 FP GT 90 FRH STN 0 SCN 0R RP 0 RP SCN SCN 8 CN 8 MAX GS-90 CH Hitachi NR 90 GC MAX GS-90 CH SN 88 SN890CH BEA D90S-90E D 00-9C MAX HN-J MAX HS 0 GS 90 RH SN 890 RH BEA R0/90S R0-98E R0-9E R00-9C MAX CN-0R MAX CN- HN 0 HN 7 HN 7 BEA DC 7 DC Type TJEP nails Brads and finish nails TF-8 0 brads,. mm VD-8 brads,. m VF- 0 finish nails TF- 0 finish na AB- finis VD- fi ST- 0 fi TT 0 P W Conversion Table Which nails fit which nailers? Only the most common products are listed call us on + 97 for further information Tel
70 Conversion Table Type TJEP nails Page Former name Fits: TJEP nailers Page Paslode Duo-Fast Haubold Senco Others strip nails GF Full head GR D-head 8 GN 9 GN GRF /90 GAS GRF /0 GAS GRF /90 GRF /00 GRF 00 Compact XP GRF /90 GAS GRF /0 GAS GRF 00 Compact XP GRF /90 GRF / PSN98 PSN00 F-00 F-0 IM 0/90 IM 90i IM 00i PSN98 PSN00 F-00 F-0 IM 0/90 IM 0/80 IM 90i IM 00i FP SP 80 SN 9 XP SN 88 GT 90 CH MAX GS-90 CH Hitachi NR 90 GC MAX GS-90 CH SN 88 SN890CH BEA D90S-90E D 00-9C DE Decra 8 DE GRF /90 GAS IM 0/90 IM 0/80 IM 90i Anchor nails BC Anchor nails KA Anchor nails BC 0 BS KA 00 GAS KA- KA-L KA- BS 00 PSN 0NP F0S-PP MC 0 Pro-BS 00 MAX HN-J strip nails FH Full head 0 - FH /90 GAS FH 0 FH 0 FH / CN 00 CN 0 NSP 0 F SN 90 D RN 0 R SP 800 SN 0 FP GT 90 FRH STN 0 MAX HS 0 GS 90 RH SN 890 RH BEA R0/90S R0-98E R0-9E R00-9C TA Wire-collated TP TP 7/ RNC R SCN 0R RP 0 RP MAX CN-0R MX Plastic-collated - MX 0 RNC 0 M SCN SCN 8 CN 8 MAX CN- HN 0 HN 7 HN 7 BEA DC 7 DC Coil nails ZE 0 Plastic-collated PC Plastic-collated IN ZE 7 - PC PC 90 CNP 0 CNP CNP 7 RNC 90 B RNC SCN SCN SCN 7 MAX CN HN-90 CN Wire-collated 9 TS PC PC 90 CN 7 CN 70 CN 00 EPAL P-0C P-7C CNW70 CNW90 RNC 90 B RNC SCN 9 SCN 0 SCN SCN 7 SCN MAX MCN CN CN 70 MCN 80 MCN 890 HN-90 HN-7 HN- BEA DC 7 DC Haften nails HA Full head PC Full head - HA GAS IM 00 A/ HAFTE PC PC Haften RNC 0 S/W MAX CN 0 G CN R Corrugated nails CO 0 Corrugated nails - CO- F C BEA W- Concrete pins CP 0 Concrete pins 9 - CP-0 GAS CP SPA 0 Spit Pulsa 700 P Pulsa 700 E Pulsa 000 BEA CN
71 Conversion Table Type TJEP nails Page TF-8 0 brads,. mm VD-8 brads,. mm Former name F8 Fits: TJEP nailers Page Paslode TF-8/0 TF-8/ F-8/0 TF-8/0 GAS TF-8/ 90/F-8 8 TFN 8/F-8 TFN 80/F-8 IM 0 F-8 IM 00 F-8 FNS80 DEB 0 D8 VD-8/0 FN 80 A Duo-Fast Haubold Senco Others K 0 SLP 0, S 00 BN FP 8 CF Akku SLP 0 Dewalt D8K MAX NF 0 NF NF /F-8 Brads and finish nails VF- 0 finish nails,. mm TF- 0 finish nails,. mm AB- finish nails,.8 mm ABF VF-/ GAS 9 F AB TF-/8 F-/0 TF-/0F TF-/B TF-/ GAS AB- AB-/0 AB-/ GAS FNA IMP0A IM ABF FN. FN 0 F- FN0 IMP F- IM 0CT 0 AB- FNA S 00 SM SLP 0, FP CF Akku GT RHS Gas SFN 0 FP XP FP CF Akku S 0 FN GT DA Gas Dewalt DC8KB DC8KN Dewalt D7K DC KB Dewalt D7K VD- finish nails,.8 mm D VD-/0 FN0A ST-0 0 finish nails,.8 mm ST0 ST-/0 FN0C TT 0 finish nails,. mm T TT- PG-0 W:. mm Wire:. x 0. mm DF0 PG-0/ CS 000 LDS 0 BE-80 W:.8 mm Wire: 0.9 x 0.7 mm / 80/ auto 7 7 PN 8 G SFW 0 BE-90 W:.8 mm Wire:. x.0 mm /F-8 90/0 BN-90/ MDS 80 PN 00 L SLS 0 Klam. ES-00 W: 0.8 mm Wire:. x 0. mm 0 - ES-00/0 0 PN 0 L PZ- W: 0.8 mm Wire:. x. mm - PQZ-7 GAS PQZ- PZ-/0 SKS/SLS SNS PQ- W:. mm Wire:.9 x. mm - PQZ-7 GAS PQZ- SQS Staples MF- W: 7 mm Wire:. x.8 mm TW- W:. mm Wire:. x. mm - MF-/0 PN 90 D PN 980 D WC0 SP - TW-/8 WC 0 XP PB-8 W: 0. mm Wire:. x 0. mm - I8 I-8/8 ES-00/ I-8 PF-0 W:.9 mm Wire:. x 0. mm PE-0 W: 8. mm Wire: 0.8 x 0. mm RA- W: 0. mm PH-0 W:. mm Wire:. x 0. mm - W-0 PF W-0 SR - S-0 PE-0/ S-0 SR - Type HT - N-0 PH N-0 SR PA-8 W:. mm Wire:. x.0 mm PV- W:.0 mm Wire:. x. mm PL- W:.0 mm Wire:. x. mm - N-8 - W- - S- 0 N-8 S0-N-8 0 W- S0-W- 00 S- S00 S- IM 00 S- Tel
ORIGINAL. Impulse nailers Pneumatic nailers Manual staplers 44. Compressors Construction fasteners 51-58
ORIGINAL. 50 years ago Paslode manufactured the world s first pneumatic nailers and in 1986 it was the first to introduce the world's first impulse nailers for wood-to-wood fastening. We are proud for
More informationSTRIP ERS TITLE DESCRIPTION TITLE DESCRIPTION TITLE DESCRIPTION TITLE DESCRIPTION TITLE DESCRIPTION TITLE DESCRIPTION FRAMING. Features.
STRIP FRAM- TO U G H ERS Length................ TITLE DESCRIPTION X Shank Diameter...........X Magazine Capacity..........X Weight............... X. Dimensions (LWH)..........X TITLE DESCRIPTION Length...............
More informationNOBE ApS ~ Bjødstrupvej 10 ~ DK-8410 Rønde ~ ~
2017 NOBE ApS offers under the brand RGN a wide range of fastening tools. Our aim is to offer good quality to the best value for your money. We cooperate closely with experienced dealers to ensure that
More informationHigh Pressure Pneumatic Tools. Satisfy Professional's Needs
High Pressure Pneumatic Tools Satisfy Professional's Needs 30%LESS WEIGHT AND VOLUME Makita High Pressure Pneumatic Tools CONCEPT Weight and volume of tool is much less than normal pneumatic tool by using
More informationBeA Pocket Catalogue. Professional Tools and Fasteners
BeA Pocket Catalogue Professional Tools and Fasteners Table of Contents BeA Fine-Wire Staplers 4 5 BeA Medium-Wire Staplers 6 BeA Heavy-Wire Staplers 7 BeA Wide-Crown Staplers 8 9 BeA Pinners 10 BeA Professional
More informationCOLLATED NAILS & FUEL CELLS. A SPECIALIST GUIDE BY TIMco
COLLATED NAILS & FUEL CELLS A SPECIALIST GUIDE BY FIRMAHOLD COLLATED NAILS & FUEL CELLS DESIGNED FOR USE IN CORDLESS GAS NAILERS FirmaHold collated nails and fuel cells are designed for the fixing of a
More informationTool Systems for Truss Construction
Tool Systems for Truss Construction Built to Hold Up. Over Time. And Under Pressure. Built to Hold Up. There s a lot riding on a truss, but none is more important than your reputation. How precisely it
More information2018 PROFESSIONAL CONSTRUCTION TOOL CATALOG
2018 PROFESSIONAL CONSTRUCTION TOOL CATALOG HISTORY Since 1942, MAX has been recognized worldwide as a leader in the manufacturing of high-end industrial tools. The MAX advantage begins with our R&D, engineering
More informationFREE! Mini MultiTool. To order.
Winter 2011-2012 FREE! Mini MultiTool With every tool or compressor purchased SENCO EXCLUSIVE! Massive Savings on Fusion the World s First Cordless Pneumatics. Senco nailers with Fusion Technology use
More informationSection O-2: Senco. Section O-2: Senco. Senco. Last Updated: 07/09/10
Senco Last Updated: 07/09/10 Brad Nails 18 Gauge Medium Head SEAY10 5/8 SEAY11 3/4 SEAY13 1 Finish Nails 18 Gauge Headless Pins SEAZ08EAA 1/2 SEAZ11EAA 3/4 SEAZ13EAA 1 Maverick Hardware Staples 15 Gauge,
More informationSENCO SKS N12-N17, SKSXP-N FASCO F4P G-50, F45C G-55TL, R3 CG-40CT, R4 PG-50CT ORDER NO. DESCRIPTION CODE DESCRIPTION POINT QTY/CLIP M/CTN
Staples - 16 Gauge APPLICATIONS: Cedar and shake shingles; subflooring; wall sheathing; roof decking; aluminum, steel and composition siding; lathing; bridging; component assembly and fencing. SN5016 M1,
More informationKarl M. Reich Verbindungstechnik GmbH HOLZ HER FASTEN NAIL STAPLE SCREW
Karl M. Reich Verbindungstechnik GmbH R FASTEN NAIL STAPLE SCREW 2007 Table of contents Coil magazine nailers 3 Plastic collated 3 Wire collated 6 Roofing nailer 6 Allround nailers 9 Strip magazine nailers
More informationonlinecomponents.com 150
150 900-147/900-148/900-149 Fish Tape 900-147 900-148 900-149 Made from flexible spring steel and black finish. Equipped with durable plastic container and slide handle. Easy to thread through the pipe
More informationSample. Table of Contents Categorized Listing. NAILS FOR FRAMING NAILERS 1 CLIPPED HEAD STRIP NAILS 1 28 CLIPPED HEAD STRIP NAILS (Wire
NAILS FOR FRAMING NAILERS 1 CLIPPED HEAD STRIP NAILS 1 28 CLIPPED HEAD STRIP NAILS (Wire 1 Collated) 31 CLIPPED HEAD STRIP NAILS (Paper 2 Collated) ROUND HEAD STRIP NAILS 3 21 FULL ROUND HEAD STRIP NAILS
More informationGCN150 Gas-Actuated Concrete Nailer
GCN0 Gas-Actuated Concrete Nailer The GCN0 gas-actuated concrete nailer is a portable fastening tool for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to
More informationGloEx Product List Assessment-Nail Selection
Item 01 Common Nail Bright Finish/HDG Flat Smooth/Ring FOR GENERAL CONSTRUCTION, CARPENTRY AND FRAMING. MADE TO CONFORM TO ASTM F1667. : Electrogalvanized option available Package s 3D 1-1/4" 14 13/64"
More informationWe continually strive to create unique experiences to ensure that your story is better... and for us, it s a privilege to be a part of it.
PRODUCT GUIDE We continually strive to create unique experiences to ensure that your story is better... and for us, it s a privilege to be a part of it. National Nail Employee-Owners BRAND EXPERIENCE SOLUTIONS
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationSENCO FinishPro 2N1, FinishPro 15, 15XP, FinishPro 15Mg, FinishPro 18, 18XP, FinishPro 18Mg, FinishPro 25XP
18 Gauge Brads APPLICATIONS: Decorative mouldings, picture frame assembly, trim and cabinet building. Brads NB5018 NB3518C FinishPro 2N1, FinishPro 15, 15XP, FinishPro 15Mg, FinishPro 18, 18XP, FinishPro
More informationNails. Nailing is a strong and easy method of fastening timber.
Nails Nailing is a strong and easy method of fastening timber. Types of Nails Bullet Head Nail General purpose nail with a small head allowing head to be punched below timber surface and then filled. Suitable
More informationLOOSE NAILS. Click to start
LOOSE NAILS Click to start SELECTION GUIDE Available Finishes Finish Indoor Outdoor Coastal Not all finishes are available with all nail types Gold Passivated Zinc Blued Nickel Plated Brass Plated Florentine
More informationBREAKING, DRILLING & FIXING
13 Hire Depots - Serving South, West & North of England 74 BREAKING, DRILLING & FIXING 12.0 100 24v CORDLESS HEAVY DUTY HAMMER DRILL 11.0 Cordless hammer with the versatility of a mains powered machine
More informationFEATURES APPLICATIONS
Model NO.: CN55 * Light weight * Light weight * Big load capacity * Big load capacity * Comfortable rubber grip * Comfortable rubber grip Model NO.: CN57 * Making pallets, drums and export * Making pallets,
More informationTOOL TEST STRAIGHT SHOOTERS BOSTITCH FN16250K-2 THE CLEAR WINNER! This is not the orginal cover.
STRAIGHT SHOOTERS BOSTITCH FN16250K-2 THE CLEAR WINNER! This is not the orginal cover. By Rick Arnold STRAIGHT SHOOTERS Features drive the differences between these 10 straight-magazine pneumatic finish
More informationPOWDER FASTENING SYSTEMS
POWDER FASTENING SYSTEMS Over a half century of leadership in powder actuated tools and fasteners The first powder actuated tools (PATs) were used for repairing damaged ship hulls during World War I. This
More informationBREAKING, DRILLING & FIXING
15 Hire Depots - Serving South, West & North of England 74 BREAKING, DRILLING & FIXING 18v CORDLESS DRILL 18v variable speed percussion drill for masonry drilling and screw driving. Perfect when working
More informationElectric Staple/Nail Gun
Electric Staple/Nail Gun Model CESN120 Part Number 3110292 Operating & Maintenance Instructions 0305 Specifications Model No... CESN120 Part No... 3110292 Power Input... 230V, 50Hz, 1Ph Watts... 600 Fuse
More informationACCESSORIES ACCESSORIES ACCESSORIES FASTENERS & TOOLS NAME PLATES PLASTIC ANGLES & COVERS BOARDS & SHEETS ADJUSTER METAL JOINTS PIPES PLASTIC JOINTS
ADJUSTERS AM-3030PS P/ADJUSTER M10 SMALL AM-3050PL P/ADJUSTER M10 LARGE AR-3212SS 32g/ea ADJUSTER AR-5012LS 31g/ea ADJUSTER 84g/ea 47 1 84g/ea CN-3010MS STEEL CAP NUT M10 CN-3010MP PLASTIC CAP NUT M10
More informationPRODUCT GUIDE REV. 8/18
PRODUCT GUIDE REV. 8/18 "We love using STINGER products. They are reliable, lightweight and get the job done right!" - RoofCARE "We love STINGER products. We've tried all the cap nailers and nothing stacked
More information2.NEAT! 3. ECONOMICAL 5. RECYCLEABLE. Open your eyes and. Six decisive arguments!
Product range Open your eyes and Six decisive arguments! 2.NEAT! Clean surfaces; clearer image 3. ECONOMICAL Economical! Save time and material; lower costs 5. RECYCLEABLE Everything can be recycled; less
More informationOn-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
More informationFor use with modern lightweight, high-strength belting. Designed to operate smoothly over slider bed or troughing conveyor applications.
staplegrip For use with modern lightweight, high-strength belting. Designed to operate smoothly over slider bed or troughing conveyor applications. Staplegrip is a very strong belt fastener; hinged plates
More informationTools for other contacts Tools for FOC contacts Crimping machine TC-C Crimping machine TK-M
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han-Yellock... 99.06 for contacts Han C... 99.09 for contacts D-Sub... 99.11 for other contacts... 99.12 for FOC contacts...
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationCATALOG AUGUST 2018 ลวดเย บ ตะป สกร เข ม
AUGUST 2018 ตะป ม วน C5 REPLACEMENT MAGAZINE LONG TRACK Information: Dewalt DDF5150500 C5 Replacement Magazine - Long Track.The C5 Trak-It is a powerful gas nailer designed for driving nails and clips
More informationHardwood Installation Products. Catalog No. 4
Hardwood Installation Products Catalog No. 4 Table of Contents Pages 1 2-4 5 6 7 8 9 Product Categories Moisture Meter & Self Leveling Concrete Restoration & Blades Abrasives Fastening Cutters & Accessories
More information+91-8048763481 U Tech Fasten Pvt. Ltd. http://www.utechfasten.co.in/ We are a coveted manufacturer, supplier and exporter of Pneumatic Tools and Fasteners. These products are acclaimed in the market for
More informationww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE
ww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 the power of experience More than 80 years of
More informationContents Software Components Fasteners Equipment
ITW is a leading international business corporation with revenues of $US14 billion. ITW has almost 100 years of experience in the design, development and manufacture of fasteners & components, and equipment
More informationBlind rivets in aluminum. Aluminum rivets with large head. Rivets, threaded inserts, tools for rivet
Blind rivets in aluminum Rivets in aluminum alloy with galvanized steel nail. Dimensions d x L: see description of the price list. Code Description dxl 38500***** See price list Aluminum rivets with large
More informationFastener Type RAPTOR S/05 Composite 19 Gauge Staple
Fastener Type RAPTOR S/05 Composite 19 Gauge Staple S/05 12.5mm Part # S/05-25 1/4 S/05-37 3/8 S/05-55 9/16 6.4mm 9.5mm 14mm BENEFITS Sawable, Sandable & Planeable Never Rusts or Corrodes Bonds Like Glue
More informationfischer Solar-fix Mounting system for photovoltaic and solar thermal panels
fischer Solar-fix Mounting system for photovoltaic and solar thermal panels Mounting system For photovoltaic and solar thermal panels A new way the sun s Mounting system 2 Suitable for pitched roofs Suitable
More informationNotes P
Notes P 2 Visit Paslode's web site www.paslode.ca for the most current product and technical information. TABLE OF CONTENTS Tools at a Glance... P 4 Cordless Impulse XP Framing Nailer...P 8 PowerMaster
More informationMC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding
MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding Ex GST Inc GST $5,590.00 $5,290.00 $6,149.00 $5,819.00 Special
More informationAIR TOOLS 2017 STAPLERS, NAILERS, STAPLES & NAILS BLOW GUNS & TYRE INFLATORS SPRAY GUNS, KITS & ACCESSORIES AIR HOSES & FITTINGS. www.
2017 STAPLERS, NAILERS, STAPLES & NAILS BLOW GUNS & TYRE INFLATORS SPRAY GUNS, KITS & ACCESSORIES AIR HOSES & FITTINGS CONTACT US: Ph: 1300 731 818 Fax: 1300 735 858 Email: sales@spear-and-jackson.com.au
More informationFloor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
More informationDRYWALL FASTENING SOLUTIONS
EN_BRO_DRYWALL-1-1-1 DRYWALL FASTENING SOLUTIONS Powers drywall projects Olympic village for London 2012, UK 1,6 million Trak-It nails Health centre Sittardsberg, Duisburg, Germany Deflection head, approved
More informationJoshua Woodsman
CONSTRUCTION GUIDE of one of our design Please Note This electronic document is protected by the identifier against unauthorized dissemination on the Internet. Before building any structure make sure you
More informationCATALOG CLASSIC Series 15.0
www.tekserve.com.tw CATALOG CLASSIC Series 15.0 ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 The power of experience More than 80 years of experience have placed
More informationMODEL GRTRN45 ROOFING NAILER
MODEL GRTRN45 ROOFING NAILER GRTRN45 COIL ROOFING NAILER 7/8 to 1-3/4 (22 mm - 45 mm) 15 COIL ROOFING NAILS 5.04 lbs. (2.29 kg) 10.5 (26.7 cm) 10.9 (27.7 cm) 3.2 (8.1 cm) 1 13 2 3 4 12 5 6 7 11 10
More informationVinyl Gazebo Instructions
P a g e 1 Vinyl Gazebo Instructions 10 Vinyl Gazebo Shown Thank you for the purchase of your New Gazebo. Depending on the size of your Gazebo, installation can usually be completed in 1 to 2 days. These
More informationFreestanding Shelving System
Freestanding Shelving System Freestanding Shelving System Ready Made Solutions Freestanding Shelving System Our Free Standing Shelving System originates from Sparring and offers an easy to install and
More informationNONIUS ceiling SUSPENSION SYSTEM
NONIUS ceiling SUSPENSION SYSTEM QUICK HANGER SYSTEM CEILING AND WALL FIXINGS INSPECTION HATCHES ACCESSORIES PRODUct catalogue 2013 INDEX 6...NONIUS ceiling SUSPENSION SYSTEM 22... QUICK HANGER SYSTEM
More informationSLIDING GATES BRUNDLE
SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour
More informationCATALOGUE CLASSIC Series THE POWER OF EXPERIENCE
CATALOGUE CLASSIC Series THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 More than 80 years of experience have placed JBC at the technological
More informationDOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationHAMMERS. Hickory hardwood handle. Hickory hardwood handle
HAMMERS 22102 (102)/22102FS Sharp Pick Hammer Well balanced use to bring up specks Saves filling with body putty Flat face 1-3/4" diameter Pick 3-3/4" long, 1 lb. 22103 (103)/22103FS Long Straight Pick
More informationIn a class of its own:
www.gsmotion.com In a class of its own: Easy To Design Easy To Install Take the safe route. The incredibly solid and wear resistant safety fence system guarantees the highest level of quality, longevity,
More informationXV 1000 PARTS MANUAL Carousel ATC Fanuc / Siemens May 2007
XV 1000 PARTS MANUAL Carousel ATC Fanuc / Siemens May 2007 Document Number 0705002A Issue A May 2007 XV1000 X Axis Assembly Drawing No. L-1060R0031 Feb-07 32 8-102003 M6 Spring Washer 8 33 8-101001 M6
More informationHAND TOOLS TWEEZERS. vice - DRILL PRESS
Torque Wrenches & Inserts Clicking torque wrench with mount for interchangeable socket tools, rapid accurate setting using QuickSelect quick-action adjuster, with Quick Release safety lock, double stop
More informationRAPTOR F/15 & F/14 Composite Finish Nails
Fastener Type RAPTOR F/15 & F/14 Composite Finish Nails 3.0 mm 1/8 Part # 12 mm 1/2 F/15-050 CP 16 mm 5/8 F/15-063CP 19 mm 3/4 F/15-075 CP 25 mm 1 F/15-100 CP 32 mm 1-1/4 F/15-125 CP F/15-125 38 mm 1-1/2
More informationPanel Installation Instructions
EXTREMELY IMPORTANT INFORMATION PLEASE READ ENTIRE PACKET! Warranty Is Void If Panels Not Installed According to Instructions 1. WARNINGS & SPECIAL NOTES 1.1 Keep panels 24 from Heaters and shield Radiant
More informationPROMPT TRADING CO. Ph. No.: FOR RESCUE
FIRED UP FOR RESCUE 78 When it comes to rescuing life and limb, every movement must be just right. This day. Any obstacles in their way, such as a locked access point, present an immediate danger to those
More information1300 Rose Road, Lake Zurich, IL Phone: Website: Operation and Maintenance Manual
POWERNAIL CO. 1300 Rose Road, Lake Zurich, IL 60047 Phone: 1-800-323-1653 Website: www.powernail.com Operation and Maintenance Manual MODEL 50M FLEX MANUAL POWERNAILER FOR TONGUE AND GROOVE FLOORING 3/8
More informationCLASSIC SERIES PRICE LIST 18.1 Recommended retail price
CLASSIC SERIES PRICE LIST 18.1 Recommended retail price CLASSIC SERIES Soldering Pencil Soldering Irons Temperature-controlled Soldering Iron Soldering Iron with Solder Feed 14ST 30ST 40ST 65ST SL 2020
More informationC-W1650S 16 Ga, 1 Wide Crown Stapler
C-W1650S 16 Ga, 1 Wide Crown Stapler MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and trouble
More informationTimber construction. Overview of products and applications. Carpentry portable circular saw HK 132
332 Overview of products and applications 334 Sword saws SSU 200, IS 330 Carpentry portable circular saw HK 132 Hand-held planer PL 205, PL 245 Chain mortiser CM 150 335 337 338 339 Accessories and consumable
More informationP250A PNEUMATIC FLOORING TOOL OPERATING INSTRUCTIONS
P250A PNEUMATIC FLOORING TOOL OPERATING INSTRUCTIONS WARNING Read these instructions thoroughly before using this tool and keep it handy for reference. Printed in Canada v140, 08/15 PRIMATECH PNEUMATIC
More informationINSTALLATION MANUAL STORAGE
IMVersion 1.1 INSTALLATION MANUAL GENERAL GUIDE: The information in this IM is intended to serve as a general guide to proper installation with no warranties intended or implied. Prime Panels assumes no
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wall Mount A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Floor Mount Wire Mesh Cable Tray System for Channeling of Cable Wiring Features
More informationwide belt sanders dmc sd 10 automatic wide belt sanders
wide belt sanders EVERYTHING YOU NEED WITH NO COMPROMISES 1 SOLID FLEXIBLE COMPACT READY EFFICIENT Sturdy and ergonomic steel main frame to satisfy all requirements One unit, three possible configurations
More informationQuality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
More informationUNI-BAR SWIVEL HAMMER. Uni-Bar. Industrial Uni-Bar. Providing Innovation Not Duplication
UNI-BAR Uni-Bar 19 MULTIPLE Forged Alloy Head Rotates 180º Adjustable Nut for Head Rotation The UNI-BAR is a high-tech improvement over standard crowbars. The forged alloy steel head can be adjusted 180º,
More informationC-1116LMA - Automatic Stapler w/ Long Mag
C-1116LMA - Automatic Stapler w/ Long Mag MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and
More informationLinear Open Style Suspended Ceiling Installation Guide
Linear Open Style Suspended Ceiling Installation Guide World Commerce Center 2000 Ring Way Road, St. Augustine, FL 32092 Phone: 800-227-8566 or 904-584-1400 www.rulonco.com Receipt and Storage: a. All
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationPRICE LIST 17.1 Classic Series. Recommended Retail Price in
PRICE LIST 17.1 Classic Series Recommended Retail Price in CLASSIC SERIES Soldering Pencil Soldering Irons Temperature-controlled Soldering Iron Soldering Iron with Solder Feed 14ST 30ST 40ST 65ST SL 2020
More information30W PUBLIC ADDRESS AMPLIFIER 10,120.00
Inter-M Price List (Commercial & Professional Audio Products) New Digital PA Line up TYPE Model Name Description Price THB PAC-5000 240W DIGITAL P.A CONBINATION SYSTEM 101,650.00 Combination PSI-5120 120W
More informationProduct #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationC-1650P 16 Gauge, 1/2 Medium Crown Stapler
C-1650P 16 Gauge, 1/2 Medium Crown Stapler MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and
More informationRenaissance Pavilion. Assembly Manual
Renaissance Pavilion Assembly Manual Thank you for your purchase of this pavilion. Renaissance Pavilion Assembly Manual This manual is designed to simplify the assembly process, however we recommend having
More informationPower Tools 84 Intex Price Guide
84 Intex Price Guide A U T O F E E D S C R E W G U N S Autofeed screwgun with improved tool-less screwfeed mechanism and easy depth adjustment. Drives 25-42mm collated screws. Reversible. Complete with
More informationOutdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages
- pages 215-228 Bicycle stands / lean-on hoops Laundry drying stands Tree guards Litter bins Planters 215 Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted
More informationSPOTNAILS FIRSTS INCLUDE:
TOOLS &FASTENERS Rolling Meadows, IL USA Spotnails has been one of the leading manufacturers of pneumatically driven fasteners for nearly 70 years. The Company manufactures a wide Mexico - Factory 1 range
More informationDiagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
More informationPanel Installation Instructions
EXTREMELY IMPORTANT INFORMATION PLEASE READ ENTIRE PACKET! Warranty Is Void If Panels Not Installed According to Instructions 1. WARNINGS & SPECIAL NOTES 1.1 Keep panels 24 from Heaters and shield Radiant
More informationNEW DURO-TA XT KEY BAR CHUCK. The flexible lightweight for large and small workpieces
NEW DURO-TA XT KEY BAR CHUCK The flexible lightweight for large and small workpieces DURO-TA XT KEY BAR CHUCK To meet the requirements of turning and milling machines for flexibility, workpiece accessibility
More informationMetro Series Sauna. installation instructions
Metro Series Sauna installation instructions Please immediately check for any hidden damage that may have occurred in shipping. If any damage is found you must notify the delivering carrier within seven
More informationPATIO INSTALLATION MANUAL
PATIO INSTALLATION MANUAL A few minutes spent reviewing the following instructions will help insure quick and proper assembly. The Patio Sauna Kit will arrive on a stretchwrapped pallet including pre-built
More informationBARBWIRE, TENSION WIRE, & UTILITY WIRE
MISCELLANEOUS ITEMS ANCHORS 66 BARBWIRE 60 BARBWIRE - GAUCHO 60 BOLTS 62 BUMPER POSTS 63 CEMENT 63 FASTENERS 63 FENCE LATTICE 68 GROUND RODS 63 GUIDERAIL 67 H-CLIPS 61 HOG RINGS 60 NAILS 63 OZ-POSTS 64,65
More informationDobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
More informationSpiral gypsum plasterboard fixing
Spiral gypsum plasterboard fixing No pre-drilling: in single sheet gypsum plasterboard No surface cracking due to special thread geometry High load bearing values up to 8 kg in gypsum plasterboard per
More informationWIRE TENSIONERS. Wire Tensioner Wheel "Sunflower" + 1 stainless steel. Wire Tensioner Wheel "Maxi" MADE IN ALUMINUM DIE CASTING WITH WIRE
ò WIRE TENSIONERS Art. A1 -.. WIRE TENSIONER Wire Tensioner Wheel "SUNFLOWER" MADE IN ALUMINUM DIE CASTING WITH WIRE BLOCKAGE IN STAINLESS STEEL. To be used for: STRETCHING WIRE Ø 3,00 mm Max Wire Tensioner
More informationAssembly instructions. 6x4. Model GH1354A. 6x6. Model GH1357A. 6x8. Model GH1360A. 6x10. Walk-in Greenhouse. Model GH1363A
ssembly instructions x Model GH x Model GH7 x8 Model GH0 x0 Model GH Walk-in Greenhouse Statement ear Customer! May we congratulate you on your new Greenhouse. We feel sure that by following the detailed
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationFast Fix Hardware STOCKLIST Items Marked (*) are non stocked items
Fast Fix Hardware STOCKLIST Items Marked (*) are non stocked items Tubular lever handles T H 1 0 1 T H 1 0 4 T H 1 0 2 TH105 TH111 TH114 Satin stainless steel sprung levers on 8mm rose. Th101 Return to
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More information