Winter Working With WOOD. Faster. Easier. Better. Drilling Extraction Sawing Sanding Routing Joining Planing Edging Workplace Organistation

Transcription

1 Faster. Easier. Better. ENDS AUGUST 2018 Winter Working With WOOD Item on every page Drilling Extraction Sawing Sanding Routing Joining Planing Edging Workplace Organistation All prices exclude GST

2 CXS Cordless Drill Set $430 Impressive ergonomics and low weight (0.9 kg) for convenient drilling and fastening The compact, handy shape makes work easier, even in cramped spaces FastFix interface and CENTROTEC quick tool-change system 12 torque settings and torque switch-off for precision fastening High-quality lithium-ion battery technology for the longest sustained usage Integrated LED light and battery charger station display Practical - integrated LED light and battery charge indicator CXS Li 2,6-Plus x battery pack BP-XS, charger MXC, CENTROTEC tool chuck, CENTROTEC bit holder, FastFix keyless chuck 10 mm, bit PZ 2, belt clip, Angle attachment XS-AS, in Systainer SYS 1 T-LOC Battery voltage 10.8 V Idling speed, 1st gear/2nd gear 0-430/ min - ¹ Drilling diameter, wood/steel 12/8 mm Li-ion battery capacity 2.6 Ah with Li-ion 0.9 kg HSS Drill Set D1-10mm 19 Piece $104 BIT BOX FREE with CXS and TXS Drill Bit Box, MIX + BH 60-CE Suits all Festool cordless drills with Fastfix interface PH1, PH2, PZ1, PZ2, PZ3, TX 15, TX 20, TX25, SZ 0.8x23 Centrotec magnetic bit fastener BH 60 CE $40 TXS Cordless Drill Set $430 Impressive ergonomics and low weight (0.9 kg) for convenient drilling and fastening FastFix interface and CENTROTEC quick tool-change system 12 torque settings and torque switch-off for precision fastening High-quality lithium-ion battery technology for the longest sustained usage Integrated LED light and battery charger station display The compact, perfectly balanced T shape makes work easier, even in cramped spaces TXS Li 2,6-Plus x battery pack BP-XS, charger MXC, CENTROTEC tool chuck, CENTROTEC bit holder, FastFix keyless chuck 10 mm, bit PZ 2, belt clip, Angle attachment XS-AS, in Systainer SYS 1 T-LOC Battery voltage 10.8 V Idling speed, 1st gear/2nd gear 0-430/ min - ¹ Drilling diameter, wood/steel 12/8 mm Li-ion battery capacity 2.6 Ah with Li-ion 0.9 kg 2 All Prices Exclude GST Faster. Easier. Better.

3 DRC18 Cordless Drill (excludes batteries and charger) $462 4-speed gearbox capable of 3800 rpm for rapid, clean drilling results Individually selectable LED lighting and battery status display Brushless EC-TEC motor for maximum service life and efficiency For easy fastening, drilling EC-TEC motor combined with high-quality lithium-ion battery technology for up to 100% greater fastening capacity Universal solution for fastening operations that require high torque and for drilling large diameter holes DRC 18/4 Li Basic Centrotec Chuck, Centrotec screwdriver bit holder, Bit PZ 2, Fastfix keyless chuck 13mm, Side handle, in a Systainer SYS 2 DF T-LOC. Excludes batteries and charger Battery voltage 18V Idling speed, 1st gear/2nd gear 0-400/0-850 min - ¹ Idling speed, 3rd gear/4th gear / min-¹ Li-ion battery capacity 5.2 Ah with Li-ion 2 kg 18V Cordless Tools exclude batteries and charger choose from 5.2 Ah AIRSTREAM Battery Pack Powerful performance High endurance Fast charging thanks to AIRSTREAM technology $129 Angle Attachment $206 Bit Assortment PH, PZ, TX & holder 25 piece set $66 2.6Ah LIGHTWEIGHT Battery Pack Compact Powerhouse Only 0.4kg $98 30 Minute Charger with AIRSTREAM technology SCA Fast charging in 30 mins $ Minute Battery Charger TCL Fast charging in 40 mins $78 Depth Stop Fastfix attachment for controlled screwing depth $136 5 Centrotec ZOBO drill bits 15-35mm $372 FREE SET OF DRILL BITS WITH EACH DRC DRILL HSS D 1-10 mm 19 pce set $104 All Prices Exclude GST 3

4 PS300 Corded Pendulum Jigsaw $578 JIGSAW BLADES LIMIT FIRST 30 JIG SAWS SOLD VALUE $100 PS 300 EBQ-Plus x saw blade, splinterguard Systainer SYS 1 T-LOC Perfectly balanced for effortless one-handed operation FastFix rapid-change system for easy saw blade changes Brilliant cutting power (MMC electronics) Patented three-way saw blade guide for cutting precise angles High-quality drive components give longer service life Improved splinterguard, no reworking Compatible in the system integrated in the CMS system as a semi-stationary saw W Stroke rate min-¹ Pendulum cover adjustment in stages 4 Cutting depth in wood with optional blades 120 mm 1.9 kg SELECTED 75mm BLADES 5 piece packs Universal blade for wood $ Universal blade for fine cuts $ Blades for cutting curves $16 for PS300 Parallel Side Fence Core Maker Guide Rail Adaptor Guide Rail 1400mm $60 $60 $33 $198 CARVEX Cordless Pendulum Jigsaws 2 saw blades, splinterguard, in a Systainer SYS 2 T-LOC Excludes Batteries and Charger (refer page 3) PSBC 420 EB Li-Basic $552 PSC 420 EB Li-Basic $552 (for cordless accessories refer dealer) 4 All Prices Exclude GST Faster. Easier. Better.

5 CTL 26 Mobile Dust Extractor NEW FEATURES $1,160 Constantly high suction SELFCLEAN filter bag in the container Antistatic function prevents static developing during work Maximum utilisation of the container volume the gross volume is the same as the net volume Smooth suction hose and optimised SYS-Dock with cord holder and T-LOC NEW function for conveniently connecting SYSTAINERs to the mobile dust extractor Includes Hepa filter NEW MODEL AVAILABLE FROM END OF JUNE CTL 26 E SELFCLEAN filter bag, smooth suction hose dia. 27/32 x 3.5 m AS/CT, hose holder, SYS-Dock with T-LOC function, cable holder & assessories Max. volume flow Max. vacuum Filter surface area W 3900 l/min Pa cm² 13.9 kg Main filter $68 Wet filter $34 Longlife filter bag Not for hazardous dust not for fine dust 3 layer polyester SELFCLEAN filter bag 5 pce pack $92 ITEM FREE SELFCLEAN FILTER BAG 5 PIECE PACK 5 PIECE PACK $380 CTL Mini Mobile Dust Extractor Ideal for small to medium volumes of dust and dirt Lightweight with compact 10 lire container Secure storage for hose and cable High suction Power $780 CTL Mini SELFCLEAN Filter Bag, hose Excludes cleaning set Max. volume flow Max. vacuum Filter surface area W 3700 l/min Pa 5000 cm2 9 kg Main Filter $54 OPTIONAL HEPA Filter $116 Longlife filter Not for hazardous dust not for fine dust 3 layer polyester $190 Standard Cleaning Set D27 / D36 S-RS piece $92 Professional Cleaning Set D27 / D36 P-RS piece $184 ITEM FREE SELFCLEAN BAGS SELFCLEAN filter bag 5 pce pack $44 All Prices Exclude GST 5

6 TS 55 Plunge Cut Saw $980 Slimline housing for maximum flexibility and close proximity to the wall (12 mm) Angle adjustment with undercut function from -1 to 47 Guide wedge for safer work and simple positioning in existing joint Transparent sliding viewing window provides a good view of the scribe mark and saw blade TS 55 REBQ fine tooth saw blade HW W48 splinterguard, Flag window; vision panel, operation tool Systainer SYS 4 T-LOC 1200 W Idle engine speed min - ¹ Saw blade diameter 160 mm Cutting depth 0-55 mm 4.5 kg FREE MM RAIL WITH TS55 SAW Guide Rail 1400mm $198 Guide Rail Bag $84 Other Rails mm $ mm $ mm $ mm $ mm $980 HK55 Circular Saw FS Guide Rail Connector Fastening Clamp FSZ 120/ Splinter Guard 1400mm Splinter Guard 5000mm $35 $74 $26 $67 Kickstop $38 The perfect accessory kit for circular saws Guide Rail Accessory Starter Set x Angle Unit 1 x Limit Stop 1 x Replacement Splinterguard (1400 mm) 1 x Hose and Cord Deflector 2 x Guide Rail Connectors 2 x Fastening Clamps FSZ x SYS 1 T-Loc Systainer $377 Corded 160mm Circular Saw HK W 18 Saw Blade SYS 4 T-Loc Systainer $618 With FREE Festool ruler All Prices Exclude GST Faster. Easier. Better.

7 TSC 55 Cordless Plunge Cut Saws (excludes batteries and charger) $782 High-speed EC-TEC motor for perfect cutting quality and rapid working progress Dust collection bag for clean, healthy working New FastFix generation for even quicker and easier saw blade changes and adaptation to the working material Brushless EC-TEC motor combined with lithium-ion batteries for maximum cutting power Flexible dual battery concept: Can be operated with two 18-volt battery packs (36V) for maximum power or one 18-volt battery pack for low weight TSC 55 Li 5,2 REB-Li-Basic fine tooth saw blade HW W48, splinterguard, Flag window vision panel, chip collection bag, operation tool Systainer SYS 5 T-LOC excludes batteries and Charger. Battery voltage Idle engine speed Cutting depth Li-ion battery capacity 1 x 18 V/2 x 18 V 18/36 V /5200 min-¹ 0-55 mm 5.2 Ah 4.6/5.3 kg 5.2 Ah AirStream Battery Pack Powerful performance High endurance Fast charging thanks to AIRSTREAM technology 30 Minute Charger with AIRSTREAM technology SCA Fast charging in 30 mins $ Minute Battery Charger TCL Fast charging in 40 mins $78 Chip Collection Bag $58 $129 Blades for TS55 and TSC55 Special saw blade 160x2,2x20 TF For work on laminate flooring and polymer materials $180 Universal saw blade 160x2,2x20 W With alternating teeth and a medium chip angle, this saw blade is suitable for both rip cuts and cross cuts $92 Fine tooth saw blade 160x2.2x20 W For clean and splinter free cuts in solid wood as well as for coated and veneered panels $112 Panther saw blade 160x2,2x20 PW For all types of wood, building panel, soft plastic $80 FREE EXTRA SAW BLADE WITH EACH TSC55 CORDLESS SAW All Prices Exclude GST 7

8 KS 60 Sliding Compound Mitre Saw $1476 Cutting depth limiter for rapid grooving For a clean and healthy working environment: The extraction system in combination with a Festool mobile dust extractor sucks up the dust at its source Festool saw blades are ideally adapted to the KAPEX KS 60 and the materials being used Inclination angle of up to 47 /46 on each side and mitre angle of up to 60 on each side Compact and lightweight, with ergonomic handles and cord holder KS 60 E HW universal saw blade W 36, clamp FSZ 120, operation tool 1200 W Idle engine speed min - ¹ Saw blade diameter 216 mm Cutting depth 90 / x 60 mm 17.8 kg Chassis UG-KS $750 Trimming Attachment $910 Fastening Clamp FSZ 120/ $74 Spot lighting SL-KS $120 Bevel SM-KS $220 Increase A-SYS-KS To set saw table height to SYS1 height $70 SAW Blades Saw blade 216mm x 2.3mm x 30mm 36 tooth For all wooden materials, building board Medium cut $164 Saw blade 216mm x 2.3mm x W Fine tooth saw blade $244 Saw blade 216mm x 2.3mm x 30mm 60 tooth For laminate flooring, laminated board, solid surface and polymer materials $220 SPOTLIGHT PURCHASE KAPEX SAW AND GET A FREE SPOTLIGHT 8 All Prices Exclude GST Faster. Easier. Better.

9 KS 120 Sliding Compound Mitre Saw $2300 Precision angle transfer via bevel and dual-line laser Fine adjustment of the saw blade angle accurate to the millimetre from the front of the machine Twin-column guide for accurate cuts Safety brake Compact, lightweight design for convenient transportation FastFix saw blade changing for adaptation to the working material Twin-column guide with two bearings for unique precision Dual-line laser for an accurate indication of the cutting line Special cutting position for cutting depths up to 120 mm KS 120 EB HW universal saw blade W60, Bevel, workpiece clamp, operation tool KS 120 UG-SET HW universal saw blade W60, Bevel, workpiece clamp, operation tool underframe, adjustable stop, telescopic slide-out scale, fold out leg Idle engine speed Saw blade diameter Cutting depth 90 / W min-¹ 260 mm 305 x 88 mm 21.5 kg Buy KS120 and undercarriage SET and save KS 120 UG-SET $3,600 SAW Blades RADIO PURCHASE KAPEX SAW AND GET A FREE FESTOOL RADIO Universal saw blade mm x 2.5mm 60 Tooth $280 Fine tooth saw blade mm x 2.5mm x 80 tooth $322 Laminate saw blade mm x 2.5mm 64 Tooth $280 All Prices Exclude GST 9

10 ABRASIVES Universal for coarse to fine sanding Paint systems compliament with VOC regulations Water-dilutable clearcoats Hard clear coats, undercoats such as GRP Also suitable for conventional clear coats, filler, paints Perfect for sanding wood Hardwood Softwood Wood composites Tropical wood 150mm Abrasives finer Granat grits available Delta 100x150mm finer Granat grits available Delta 80x133mm finer Granat grits available 10 pack 50 pack 100 pack P P P P P P P P P P P P P pack 50 pack 100 pack P P P P P P P P P P P pack 50 pack 100 pack P P P P P P P P P P P P Pack Pack Pack For pricing refer to dealer Faster. Easier. Better.

11 RO 150 Geared Eccentric Sander $1096 ROTEX rotary motion for efficient material removal Eccentric motion for highquality, scratch-free surfaces FastFix sanding pad system, tool-less Ideal ergonomic grip positions Sanding up to the edge thanks to the Festool PROTECTOR Three tools in one for coarse sanding, fine sanding and polishing The original 3 in 1 principle Select the accessory for course sanding, fine sanding, polishing RO 150 FEQ-Plus MULTI-JETSTREAM 2 FastFix sanding pad Ø 150 mm (soft W), Festool PROTECTOR, Systainer SYS 3 T-LOC 720 W ROTEX rotary motion speed min - ¹ Eccentric motion speed min - ¹ Sanding stroke 5 mm 2.3 kg - Backing Pads for Abrasives Hard for flat surfaces $84 Soft, universal Pad (included with tool) $84 Supersoft or fine sanding $84 Interface Pads 5mm thick, 2 piece pack $40 15mm thick, 1 piece $30 For Abrasives see page 10 Backing pad for polishing Abrasives Systainer FREE ABRASIVES SYSTAINER WITH EACH RO150 SANDER $64 $124 ROTEX 90 4 in 1 Sander / Polisher 90mm + Delta + Corner Sander ROTEX Fast Fix Sanding Pad: Ø 90 StickFix sanding Disc Festool Protector In systainer $920 All Prices Exclude GST 11

12 ETS 150 Eccentric Sander 5 mm sanding stroke for efficient material removal Stepless speed preselection, constant speed even under load Dual bearing for a long service life Weighs only 1.8 kg for particularly effortless work Sanding pad brake for safe, faultless work with no reworking costs ETS 150/5 EQ-Plus MULTI-JETSTREAM 2 M8 sanding pad Ø 150 mm (soft W) filter cartridge, operation tool, Systainer SYS 3 T-LOC $664 ETS 150/5 EQ MULTI-JETSTREAM 2 M8 sanding pad Ø 150 mm (soft W), filter cartridge, operation tool, FIXED LEAD in carton $590 Eccentric motion speed Sanding stroke (also available in 3mm stroke) Interchangeable sanding pad dia. 310 W min-¹ 5 mm 150 mm 1.8 kg Backing Pads for Abrasives Interface Pad FREE ABRASIVES SYSTAINER WITH EACH ETS 150/5 & ETS EC 150/5 SANDER Hard, for flat surfaces Soft, for universal surfaces (standard on 5mm sander) Supersoft (standard on 3mm Sanders) $84 5mm thick, 2 piece pack $40 15mm thick, 1 piece $30 For Abrasives see page 10 Abrasives Systainer $124 ETS EC 150 Eccentric Sander Longlife thanks to EC technology and sanding pad brake with carbide tip Compact design and weighing only 1.2 kg for optimal ergonomic work conditions Stepless speed preselection, constant speed even under load Optimal work protection thanks to vibration and extraction detection ETS EC 150/5 EQ-Plus MULTI-JETSTREAM 2 M8 sanding pad Ø 150 mm (soft W), operation tool Systainer SYS 2 T-LOC $976 Eccentric motion speed Sanding stroke (also available in 3mm stroke) Interchangeable sanding pad dia. 400 W min-¹ 5 mm 150 mm 1.2 kg ETS EC 150/5 EQ MULTI-JETSTREAM 2 M8 sanding pad Ø 150 mm (soft W), operation tool in carton $ All Prices Exclude GST Faster. Easier. Better.

13 DTS 400 Delta Sander $590 Longlife dust catcher Protector PR DTS-R 100x For DTS 400 REQ Up to 25% greater material removal capacity: The MMC control electronics transfer the power of 250 watts directly to the work surface Work effortlessly: Thanks to the compact design, weight of just 1.2 kg and a perfectly balanced weight distribution For continuous use: Long-life dust collection bag which can be emptied and reused, made from extra-durable nonwoven polyester Reliable extraction with the new CLEANTEC connecting system: The integrated bayonet fitting quickly and reliably joins the connecting sleeve of the suction hose to the extractor connector on the power tool. And it is just as easy to detach. You decide when the connection is undone: and only you A healthy working environment and less rework: In combination with the mobile dust extractor or the long-life dust collection bag and attachable PROTECTOR for smooth sanding along window surfaces, frames and panelling Abrasives see page 10 TS 400 REQ-Plus StickFix sanding pad 100 x 150 mm, Festool PROTECTOR (201692), long-life chip collection bag (201693), Systainer SYS 2 T-LOC Idle engine speed Sanding stroke Interchangeable sanding pad FREE SYSTAINER WITH EACH DTS/RTS400 SANDER 250 W min-¹ 2 mm 100 x 150 mm 1.2 kg Systainer SYS 1 T-Loc Assortment Storage Box $134 RTS 400 Orbital Sander Rutscher Features of RTS 400 as per DTS 400 $590 RTS 400 REQ-Plus StickFix sanding pad 80 x 133 mm, Festool PROTECTOR (201691), long-life chip collection bag (201693), Systainer SYS 2 T-LOC Idle engine speed Sanding stroke Interchangeable sanding pad 250 W min-¹ 2 mm 80 x 133 mm 1.2 kg All Prices Exclude GST 13

14 OF 1010 Router $910 OF 1010 EBQ-Plus Ø 1/4 mm clamping collet, side stop, guide rail adapter, chip deflector, operation tool, Systainer SYS 3 T-LOC Outstanding ergonomics and low weight Quick-acting brake for improved safety (OF 1010 EBQ) MMC electronics for adaptation to the working material and temperature monitoring Routing depth adjustment to 1/10mm Spindle stop for easy cutter changes Chip extractor integrated into the router baseplate 1010 W Idle engine speed min - ¹ Collet dia. 6-8 mm Routing stroke 55 mm 2.7 kg WITH OF1010 FESTOOL KNITTED HAT $ OF 1400 Router $1160 Routing depth adjustment to 1/10 mm Short set-up times: Rocker and ratchet principle for convenient cutter changes Tool-less copying ring changes Pure precision: rigid base plate due to guide columns on both sides Up to 99 % dust extraction when routing with chip deflector and dust extraction hood Quick-acting brake and MMC electronics OF 1400 EBQ-Plus Ø 1/4mm clamping collet, Ø 1/2mm clamping collet, side stop with fine setting, copying ring Ø 30 mm, extraction hood, chip deflector, operation tool, Systainer SYS 4 T-LOC 1400 W Idle engine speed min - ¹ Collet dia mm Routing stroke 70 mm 4.5 kg GUIDE RAIL ADAPTOR WITH OF1400 Routing template MFS For range of Copying Rings and Collets refer to dealer Guide Rail Adaptor $136 ALSO AVAILABLE IN L x W: 600 x 300 MFS $750 For all routers with copying ring For rectangular (max. 300x100 mm) or curved (max. Ø 600mm) cut-outs L x W: 300 x 100 mm Circle routing insert 2 x mitre guide $ All Prices Exclude GST Faster. Easier. Better.

15 DF 500 Joining Machine $1540 Patented routing principle unique to hand-held machines for accurate work with no kickbacks Stops that are quick and easy to adjust, for accurate results Rotation-proof joint with DOMINO dowels providing maximum stability System accessories compatible with both DOMINO jointers Varied use with dowel sizes from 4 x 20 mm to 10 x 50 mm DF 500 Q-Plus DOMINO cutter D5, support bracket, operation tool Systainer SYS 2 T-LOC 420 W Idle engine speed min - ¹ Depth stop for routing depth 12, 15, 20, 25, 28 mm Max. routing depth 28 mm 3.2 kg DOMINO Bits Router Price Ø 4 mm $ Ø 5 mm $ Ø 6 mm $ Ø 8 mm $ Ø 10 mm $ Handrail Fence $90 DOMINO Beech Router PCS Price 4x30mm 450pcs $ x30mm 300pcs $ x40mm 190pcs $ x36mm 130pcs $ x40mm 130pcs $ x50mm 100 pcs $ x50mm 85 pcs $ Other packs available - also in hardwood NEW BASIC FURNITURE CONNECTOR SET x Domino KV D8 basic structure connector 20 x Domino LR32 KV-LR32 D8 basic structure connector 200 x cover caps - assorted colours 20 x Domino D8 x 36mm 1 x BS-KV D15 drill template 1 x KVB-HW D15 hinge location cutter 1 x screwdriver in Systainer SYS 1 T-LOC $740 ORDER AS AND RECEIVE TRIM STOP AND CROSS STOP FREE Optional Sets DF500, Trim Stop, Cross Stop Set $1540 Save $$$ Domino Assortment Includes 5 cutters 4,5,6,8,10mm DOMINOs 4x20, 5x30, 6x40, 8x40, 10x50mm 1060 piece pack, in Systainer Trim stop $104 Cross Stop $122 DF500 & Domino Assortment Set $1860 Save $$$ $480 All Prices Exclude GST 15

16 DF 700 Joining Machine $2240 Patented routing principle unique to hand-held machines for accurate work with no kickbacks Maximum stability of joints up to a DOMINO size of 14 x 140 mm Stops that are quick and easy to adjust, for accurate results Saves more time compared to a stationary machine System accessories compatible with both DOMINO jointers DF 700 EQ-Plus DOMINO cutter D 12, support bracket, 2 x empty dowel box, operation tool, Systainer SYS 5 T-LOC 720 W Idle engine speed min - ¹ Depth stop for routing depth mm Max. routing depth 70 mm 5.2 kg DOMINO Bits Router Price Ø 8 mm $ Ø 10 mm $ Ø 12 mm $ Ø 14 mm $ DOMINO ASSORTMENTS Includes 8,10mm CUTTERS DOMINOs assorted 8mm & 10mm 306 piece pack, in Systainer $440 DOMINO Beech Router PCS Price 8x80 190pcs $ x80 150pcs $ x pcs $ x75 104pcs $ x100 80pcs $ Other packs available - also in hardwood Includes 12,14mm CUTTERS DOMINOs assorted 12mm & 14mm 128 piece pack, in Systainer $380 DOMINO CONNECTOR SET Includes corner and flat connectors, Split and cross anchors, wrench, Cover caps 14 x 75mm Domino over 200 pieces $450 ORDER AS S AND RECEIVE TRIM STOP AND CROSS STOP FREE DF700, Trim Stop, Cross Stop S $2,240 SAVE $$$ Corner Connector Set EV 32 Set anchor bolts 32 cross anchors 32 split anchors $210 Flat Connector Set FV 16 Set Double-headed bolts 32 Cross anchors Widener for 32 cross anchors $ All Prices Exclude GST Faster. Easier. Better.

17 EHL 65 One-handed Planer $576 Only 2.4 kg, compact height, soft grip on handle and chip depth adjustment, additional grips for better support Quiet: The spiral blade reduces the noise level considerably Maximum 4 mm planing depth and 23 mm rebate depth for more speed and flexibility Variable chip depth adjustment and spiral blade for high surface quality in diverse application areas Efficient dust extraction at the left/ right side no clean-up needed No interruptions thanks to quick blade change with automatic adjustment the timely and complex task of adjusting the cutting diameter is dispensed with EHL 65 EQ-Plus Parallel side fence, operation tool blade Systainer SYS 2 T-LOC 720 W Planer shaft speed min - ¹ Planing width 65 mm Planing depth 0-4 mm 2.4 kg Chip collection bag $84 EXTRA BLADE WITH EHL 65 PLANER $32 HL850 E Planer $1038 SPORTS BAG VALUE $93 Work up to the edge for unlimited rebate depth Spiral blade for a smooth planing pattern Efficient dust extraction Precision chamfering with 90 V Groove HL 850 EB Plus Parallel side fence, rebate depth stop, extraction adaptor, Systainer SYS 3 T-LOC, tool Planer shaft speed Planing width Planing depth 850 W rpm 82 mm 0-3.5mm 3.9kg Standard spiral blade $60 Optional heads & blade for special finishes Rustic Fine Rustic Coarse Rustic Undulating $314 All Prices Exclude GST 17

18 KA 65 Edgebander $4436 Easy, clean and efficient working progress and patented cartridge gluing system for quick colour changes Precision glue application for a perfect join quality and maximum adhesion Nozzle system that is easy to clean, machine housing does not heat up, allowing safe working progress Adhesive melts according to requirements and does not boil, discolour or deteriorate Easy to handle, perfect ergonomics, clear view of the workpiece Perfect in a system - integrated in a complete system of accessories and consumable materials for achieving the perfect edge KA 65 Plus front handle, 4 x EVA adhesive, natural, Systainer SYS 4 T-LOC Edge height Edge thickness Inner radius 1200 W mm 0,5-3,0 mm > 50 mm 7.9 kg Edge Trimming Set Includes: edgebanding magazine, abrasives, trimming attachment, sanding block, scraper, scratch protection base with 3 felts, polishing felt, polishing cloth, polishing agent In Systainer SYS 4 T-LOC $710 COMPLETE KA 65 Edgebander & Edge trimming Set $4720 MFT/3 CONTURO table adaptor plate AP-KA 65, cross brace, in carton Trimming machine machine for plastic edging (included in ) WITH COMPLETE SET (574617) FREE 48 PIECE CARTON OF NATURAL, WHITE, OR BLACK ADHESIVE PELLETS Adhesive 48 piece natural white $1464 $290 adhesive must be nominated at time of ordering. $ black $ All Prices Exclude GST Faster. Easier. Better.

19 CMS Compact Module System Step 1: Choose your base Basic Unit Build on the basic CMS with compatible modules and accessories Tools can be switched on and off from the basic CMS unit Lightweight 11 kg and robust $984 ROLLER STAND WITH CMS TABLE Step 2: Choose your tool Use tools on their own or in the CMS. (These tools complete in SYSTAINER box) 70mm Router (OF 1400) Trion Jigsaw (PS 300) mm Plunge Saw (TS55) mm Plunge Saw (TS75) $1160 $578 $980 $1380 Step 3: Choose your tool module holder Router Module (Suits both OF 1400 and OF 2200) $1175 CMS-PS Module $389 TS55 R Module TS75 Module $690 $720 Step 4: Add your accessories Rip Fence LA For precise, safe rip cuts $430 Sliding Table ST With two securing positions $594 ROLLER STAND WITH CMS TABLE Extension Table VB For sawing to width $480 Extension Table VL For supporting long workpieces $370 All Prices Exclude GST 19

20 MFT $1319 Compatibility with Compact Module System CMS Ideal connection to the Festool system Safe sawing and precise routing thanks to the guide rail Angle stop, stop slide and additional clamping device ensure exact results Ergonomic work position thanks to the table height of 90 cm Mobile use of the MFT 3 through space-saving foldaway legs Maximum precision with aluminium profile for retaining a guide rail and the angle stop MFT/ table with perforated top and foldaway legs, swivel unit, support unit, angle stop, adjustable stop, guide rail FS 1080/2, deflector FS-AW, additional clamp Table dimensions Table height, legs folded away Table height, legs unfolded Max. workpiece thickness 1157 x 773 mm 180 mm 900 mm 78 mm 28 kg Cross brace $160 Fixed clamps $192 Fastening clamp 300mm Piece pack $89 Fastening clamp 120mm Piece pack $74 Lever clamp 160mm $94 Roller Stand $316 ROLLER STAND WITH MFT TABLE festool.co.nz Hindin Marquip Ltd Auckland Hamilton Christchurch for the nearest dealer sales@hml.co.nz website: Only available from participating Festool dealers, subject to availability All price offers are exclusive of GST. Promotion Valid to 31/8/2018. No rights whatsoever can be claimed from the information and illustrations in this catalogue. We reserve the right to correct any errors or omissions. Images are for illustrative purposes only. shown are not included with the price of the tool unless specifically included. 20 All Prices Exclude GST Faster. Easier. Better.