Stance 6085 Treatment Tables Assembly Instructions

Size: px

Start display at page:

Download "Stance 6085 Treatment Tables Assembly Instructions"

Clement Fields
5 years ago
Views:

1 Stance 6085 Treatment Tables Assembly Instructions Model #ST6085 Treatment Table only Model #ST6085-SH Treatment Table with Shelf Model #ST6085-DW Treatment Table with Shelf and Two Drawer Cabinet Your table may vary from this illustration 45 Goodrich Drive, Kitchener, Ontario, Canada N2C 0B8 tel fax

2 Thank you for purchasing the 6085 Stance Treatment Table. You will find this solidly engineered product will give you years of reliable service. Four your safety and that of the patient it is very important that this table is assembled according to these instructions! Items Included in the Carton(s): Stance ST6085 Treatment Table only: 1) Treatment Table 2) Paper Roll Holder 3) Fastener Kit: a. Four (4) 1/4-20 x 2-1/2 long Philips drive machine screws b. Four (4) 1/4-20 x 5/8 long Philips drive machine screws c. Assembly Instructions Stance ST6085-SH Treatment Table with Shelf: 1) Treatment Table 2) Treatment Shelf 3) Paper Roll Holder 4) Fastener Kit: a. Four (4) 1/4-20 x 2-1/2 long Philips drive machine screws b. Four (4) 1/4-20 x 1-1/2 long Philips drive machine screws c. Assembly Instructions Stance ST6085-DW Treatment Table with Shelf and Two Drawer Cabinet: 1) Treatment Table 2) Treatment Shelf 3) Two Drawer Cabinet 4) Paper Roll Holder 5) Fastener Kit: a. Four (4) 1/4-20 x 2-1/2 long Philips drive machine screws b. Four (4) 1/4-20 x 1-1/2 long Philips drive machine screws c. Four (4) #8 1 1/4 long Philips drive wood screws d. Assembly Instructions - Page 2 -

Assembly Instructions for Treatment Table only: Tools you will need: 1) #3 Philips Screwdriver 1) Place Treatment Table carton right side up and remove all staples to avoid damaging the treatment

3 Assembly Instructions for Treatment Table only: Tools you will need: 1) #3 Philips Screwdriver 1) Place Treatment Table carton right side up and remove all staples to avoid damaging the treatment Table. 2) Open carton out flat on the floor to provide a clean assembly area. Roll the Treatment Table onto the cardboard as shown here. 3) Loosen bubble wrap and remove Fastener Kit, Cross Channel and Paper Roll Holder. 4) Pivot both leg end frames to their full right position and securely fasten the end frame to the Treatment Table top with the four (4) 1/4-20 x 2-1/2 long machine screws provided. - Page 3 -

7) Secure the Cross Channel using the four (4) 1/4-20 x 5/8 long machine screws provided.

4 5) With the help of an assistant, now rotate the Treatment Table onto its feet. 6) Unpackage the Cross Channel and position onto the support brackets as shown here. 7) Secure the Cross Channel using the four (4) 1/4-20 x 5/8 long machine screws provided. 8) With the help of an assistant move the Treatment Table to the desired location and adjust the levelling feet with a 7/16 open end wrench, if needed. 9) Remove all packaging material to a recycling bin. - Page 4 -

5 Installation Instructions for optional Shelf: Tools you will need: 1) #3 Philips Screwdriver 1) With the help of an assistant set the Shelf in place as shown. The Shelf drops in on top of cross channel and will be flush with the two end frame cross bars. The Shelf also rests on an L bracket in each corner. 2) Secure each end of the Shelf with two (2) 1/4-20 x 1-1/2 long machine screws provided. 3) Remove all packaging material to a recycling bin. - Page 5 -

6 Installation Instructions optional two Drawer Cabinet: Tools you will need: 1) #3 Philips Screwdriver 2) Electric Screwdriver with #2 Philips driver bit Important Notice: Please note that the Drawer Cabinet can be installed on either end of the Treatment Table or anywhere along the length of it. If it is located at the Head end of the Treatment Table, it must be positioned inward from the front leg by at a minimum of 1 1/4 to allow space for the paper roll. If it is located at the Foot end of the Treatment Table, it must be flush with the front leg, as shown below (left). This is 1) to permit the drawers to open, and 2) to position the screws securing the Shelf within the recess on the underside of the Drawer Unit (right). Drawer cabinet must be flush with front edge of shelf and adjacent to leg Recess Bottom of cabinet 1) Remove the Drawer Cabinet from its packaging. 2) Remove the two drawers from the Cabinet. 3) With the help of an assistant place the Cabinet on the shelf in the desired location following the Notice above. The Cabinet should be flush with the front and rear edges of the Treatment Shelf. Con t - Page 6 -

7 4) Secure the Cabinet to the Shelf using the four (4) #8 x 1-1/4 long wood screws provided. 5) Install the drawers. 6) Remove all packaging material to a recycling bin. - Page 7 -

8 Installing the Paper Roll: If you have any questions regarding these package, please contact us at , or by to Stance Healthcare OM6085 Owners Manual, 6085 Treatment Table, REV 2 - Page 8 -

Installation Instructions Evolve Cabinets

Installation Instructions Evolve Cabinets Follow these installation instructions for Evolve upper, base, tall, and scope cabinets with AireCore or wood composite construction. Tools needed: Flat head screwdriver