Performance 2.0 Series
|
|
- Anabel Norton
- 5 years ago
- Views:
Transcription
1 Performance. Series Warning: Excessive weight hazard! Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call ; for U.K 8..69: at STOP ATTENTION: Is your cabinet damaged? Need help or spare parts? For fastest service, contact NewAge Products at ; or Do not return to the retailer. R
2 INDEX Product Overview: Unpacking - Tools Needed - Included Quantities - Included Parts - Weight Capacity - 5 Worktop Options - 5 Installation Options - 6 Installation Overview: Floor Installation - 7 Wall Mount Installation - 8 Slatwall Installation - 9 Sets with Casters - Corner Set Installation - Hanging Wall Cabinets: On Studded Wall - On Slatwall - Securing Wall Cabinets: To Wall - To Other Cabinets - 5 Fastening Cabinets on Casters - 6 Installing Worktop: Standard installation on cabinets - 7 Using Support Brackets - 8 Corner Worktop - 9 General Assembly: Feet & Levelling cabinets - Casters - Drawers - Handles - Stacking - Closet Rod - 5 Shelves - 6 Utility hole - 7 Magnetic Racing Stripe -8 Warranty - 9
3 Unpacking Begin by placing the package on a covered flat surface. Remove all cardboard, foam packaging material and clear plastic bags. Dispose / recycle all packaging materials. Verify all the contents in the box and gather the required tools. See Tools Needed, and Included Quantities list. Tools Needed x Adjustable wrench x Magnetic Level x Stud Finder x Tape Measure x 7/6 Socket driver wrench x 7/6 socket x Pencil x # Phillips Bit x # Phillips head screwdriver x 6 mm or /6 drill bit x Cordless Power Drill x Hammer Drill x Masonry Bit [optional for masonry]
4 Included Quantities Base Cabinet Tool Drawer Locker Wall Corner Wall Hardware Pack Cabinet Leg Leveling Foot Adjustable Steel Shelves Handles Closet Rod Locker Support Bracket Joining Bracket Worktop Wall Support EVA Foam Drawers Liners Utility Hole Grommet NewAge Logo Individual Parts Adjustable Steel Shelves Coset Rod Cabinet Leg Handle Locker Support Bracket Hardware Pack Leveling Foot (M x 65mm) Utility Hole Grommet Joining Bracket Hardware Pack NewAge Logo Worktop Wall Support EVA Foam Drawer Liners
5 Weight Capacity 5 lbs. 5 lbs. lbs. 5 lbs. Wall Cabinets Max lbs. 5 lbs. lbs. lbs. 5 lbs per foot. lbs. per Set of lbs. lbs. lbs. 5 lbs. lbs. lbs. lbs. lbs. 5 lbs. per Caster 5 lbs. per Set of Base Cabinet Max 6 lbs. Tool Cabinet Max 6 lbs. Locker Max 8lbs. lbs. Worktop on Cabinets Max lbs. / Cabinet Worktop Options Corner Worktop 8 Worktop. Fits over Cabinets 7 Worktop. Fits over Cabinets 5
6 Installation options for Cabinets Important information: Please read before beginning installation. Option. - see page 7. Floor mount with adjustable levelling legs. Layouts shown are only examples.all cabinets are mobile and can be configured in a variety of different layouts. Plan layout and measure space before installing. Locate wall studs prior to installation. Consider the location of electrical outlets when planning layout. Measure height of cabinets for clearence. Base cabinets can be mounted flush front or flush back with Locker cabinets. Option. - see page 8. Wall mount cabinets off floor. Option. - see page 9. Wall mount on slatwall using slatwall brackets (sold seperately). Option. - see page Sets with casters and adjustable leveling legs. Note: Casters cannot be installed on Locker cabinets. Casters not included in all sets. Option 5. - see page Corner set installation. Note: Corner cabinets can be installed using all installation options. 6
7 Option Floor Installation Overview Plan layout before installing cabinets. Attach feet to cabinets. See feet installation on page. It is recommended to begin installation with Locker cabinet. Cabinets must be fully secured to wall using () wall screws per cabinet. Casters can not be installed on locker cabinets. Begin by securing Locker cabinet to wall in determined postion. See Page for full instructions. Position and secure remaining cabinets to wall. Install cabinets one at a time. See page for full instructions. Attach cabinets together. See page 5 for detailed fastening instructions. 5 Attach worktop. See page 7 for full instructions. 7
8 Option Wall Mount Installation Overview Plan layout before installing cabinets. Determine height cabinets will be installed off the ground. It is recommended to begin installation with Locker cabinet. Install cabinets one at a time. Cabinets must be fully secured to wall using () wall screws per cabinet. Begin by attaching Locker cabinet to wall. See page for full instructions on hanging cabinets. Position and secure remaining base cabinets, and wall cabinets to wall. See page. Attach cabinets together. See page 5. Attach worktop. See page 7 for full instructions. 8
9 Option Slatwall Installation Overview Plan layout before installing cabinets. Determine height cabinets will be installed off the ground. Slatwall bracket sold seperately Slatwall brackets for use with standard slatwall. Check slatwall manufacturer for rated load capacity. Do not overload. Begin by attaching locker cabinet to slatwall using slatwall bracket. See page for slatwall hanging instructions. Position and secure remaining base cabinets, and wall cabinets. Attach cabinets together. See page 5. Attach worktop. See page 7 for full instructions. Slatwall brackets sold separately. See below for quantities needed. Locker, Tool and Base Cabinets - per cabinet () x Slatwall Brackets. Part # 5979 Wall Cabinets - per cabinet () x Slatwall Brackets. Part # 5979 Corner Wall Cabinets - per cabinet () x Slatwall Cabinets. Part # 598 9
10 Option Caster Set Installation Overview Plan layout before installing cabinets. It is recommended to begin installation with Locker cabinet. Install cabinets one at a time. Locker and wall cabinets must be fully secured to wall using () wall screws per cabinet. Casters not included in all sets. Attach feet to locker cabinets. Attach casters to base cabinets. See full installation on pages &. Begin by securing Locker cabinet to wall in determined postion. See Page for full instructions. Secure wall cabinets to wall and fasten together. A gap of is recommended between wall and locker to allow clearence for cabinets on casters. See page & 5 for full instructions. 5 Attach base cabinets together using joining plate and attach worktop. See page 6-7. Position cabinets.
11 Option 5 Corner Cabinet Installation Overview Attach feet to cabinets. See full feet installation on page. Install corner wall cabinets followed by remaining wall cabinets. See full instructions on pages. Install corner worktop supports and base cabinets. See page 9. Install corner worktop. See page 9. Position,secure and attach all remaining 5 6 cabinets and worktops. See pages,, 5 and 7.
12 Hanging Cabinets on Studded Wall Gather parts. Note: Do not load cabinet without first securing to the wall. Use stud finder to locate the studs and mark a line on the wall with a pencil at desired height. Wall Screw (/ x.5 ) Wall Screws per cabinet Washers per cabinet Wall Washer (/ ) Begin by attaching locker to wall. Line up top of cabinet with pencil line(), and predrill /6 (6mm) holes into studs through holes in cabinet(). Use wall screws to secure to wall(). Determined Height X per Cabinet Attach remaining base cabinets (), and wall cabinets() to wall using same method as locker cabinet()attachment. X per Cabinet 5 Finish by fastening cabinets together. See page 5 for detailed instructions. Masonry. X per Cabinet Follow steps to 5. Drill pilot holes through the perforated strip with hammer drill & masonry bit. Use x ( ¼ x ¼ )Tapcon Concrete Anchor into wall. (Not Included) OR x (# x )Screw with /6 masonry plug into wall. (Not Included) Follow Step 6.
13 Hanging Cabinets on Slatwall Note: Slatwall Brackets for use with standard slatwall Sold Separately. Check with your slatwall supplier to determine the rated capacity of your slatwall. DO NOT OVERLOAD. Parts Needed. Insert bolts through slatwall bracket. Slatwall Bracket Hex Bolt (¼ x ⁵/₈ ) Washer (¼ ) Lock Nut (¼ ) Attach bracket to slatwall at desired height. Align bolt with slots on back of cabinet and hang cabinet. Bracket Placement. Brackets needed per cabinet. Wall -, Locker,Base and Tool Note:For Locker cabinet attach second bracket 66 below first bracket.for Base cabinet attach second bracket 8 below first bracket.
14 Securing Cabinets on Studded Wall Note: Do not load cabinet without first securing to the wall. Use stud finder to locate the studs and mark the wall with a pencil. Gather parts. Wall Screw (¼ x ½ ) Wall Washer (¼ ) Base, Locker, Tool and Wall: wall screws and washers Corner Wall: 6 wall screws and 6 washers Place cabinet tight 5 against the wall. Align cabinet to stud marks. Level cabinet. 6 Pre-drill () / (6.5mm) then drill wall screws and washers through perforated holes into studs. X Masonry. Follow steps to 5. Drill pilot holes through the perforated strip with hammer drill & masonry bit. Use x ( ¼ x ¼ )Tapcon Concrete Anchor into wall. (Not Included) OR x (# x )Screw with /6 masonry plug into wall. (Not Included) Follow Step 6.
15 Fastening Cabinets Parts Needed. Note: All drawers must be removed prior to fastening cabinets together.see Page for drawer removal instructions. X Hex Bolt (¼ x ⁵/₈ ) 8 X Washer (¼ ) X Lock nut (¼ ) Align bolts, tighten lightly. X Level cabinets and tighten all bolts. 5
16 Fastening Cabinets with Casters Parts Needed. Open cabinets, remove any shelves, drawers or loose items. 8 x Foot Attachment Screw x Joining Brackets Flip cabinets and push sides together, locate holes on edges. Align holes with joining plate and attach using foot attachment screws. Attach casters and fasten cabinets together. See pages 5. &. 5 6
17 Mounting the Worktop Parts Needed. Place Worktop on cabinets. Locate the punch holes on the tops of the cabinets. x Wood Screw #8 x 5/8 I X X Drill into the worktop using the #8 x 5/8 wood screws. Optional: For locker support bracket. See Page 8. X X 7
18 Installing Worktop Side Support Bracket Note: Support Bracket included with Lockers A support bracket is to be used if the worktop is added to the set without a secondary supporting base/tool cabinet. Parts Needed. Open locker doors and locate holes on either side. X Lock Nut (/ ) X Hex Bolt (.5 x 5/8 ) X Washer (/ ) x Wood Screw #8 x 5/8 Align bracket holes with locker holes Tighten nuts & bolts. and insert hex bolts through holes. X Use #8 x 5/8 wood screws and washers, provided in the locker packaging. 5 X X 8 X
19 Installing Corner Worktop Parts Needed. Install Side Support Brackets on the two base cabinets that will be adjacent to corner worktop. See Step in side support brackets on page 8. 6 x # 8 x 5/8 screw X Wall Screw (/ x.5 ) x Washer (/ ) x Wall Support Bracket x Worktop Support Bracket X Hex Bolt (/ x 5/8 ) Position both cabinets in desired corner. Locate studs and mark a level pencil line at height of cabinets. Align top of wall support bracket with pencil line. Pre-drill / (6.5mm) holes, then using () X.5 lag screw per bracket attach corner wall support brackets into wall studs. Position one cabinet into position and attach corner cabinets to brackets using #8 x 5/8 wood screws. 5 Attach remaining cabinets and countertops. See page 7. 9
20 Installing Feet Parts Needed. Open cabinet, remove any shelves, drawers or loose items. 6 x Foot Attachment Screws x M x 65mm Levelling Foot x Cabinet Leg Flip cabinet upside down, locate holes at corners. Align leg with edge of cabinet. Screw in x Foot attachment screws & leveling foot. Repeat steps for each corner. 5 Stand & level feet.
21 Installing Casters Note: Install casters with brakes on front of cabinet. Parts Needed. Open cabinet, remove any shelves, drawers or loose items. x Casters 6 X Hex Bolt (/ x 5/8 ) 6 X Washer (/ ) 6 X Lock Nut (/ ) Flip cabinet upside down, locate holes forming a square. Align casters with holes. Attach with hex bolts, washers, and nuts. Repeat step for each caster.
22 Installing the Drawers Inserting Drawers. Align Rails Slide In Removing Drawers. Right Side Left Side Slide Out
23 Installing Handles Parts Needed. Align Handle to holes on doors or drawers. Handle Handle Bolt (M x mm) Base/Locker: Handles and Handle Bolts Tool Cabinet: Handles and 6 Handle Bolts Screw in bolts using number a # Philips head screwdriver being careful not to overtighten bolts.
24 Stacking Cabinets Parts Needed. Note: Do not exceed weight capacity of feet. See page page 5. Installing cabinets on stacked cabinets is not recommended. Position a second base cabinet on top of an existing base cabinet. X Hex Bolt (/ x 5/8 ) 8 X Washer (/ ) X Lock Nut (/ ) Locate punch holes on adjoining Attach cabinets using the supplied surface and insert bolts. / x 5/8 hex bolts, washers, and nuts. Tighten all bolts.
25 Inserting Locker Utility Rod Tilt Rod at a slight angle. Insert and bring to horizontal position above slots in wall. Ensure Rod tabs engage in slots on side panel when lowering into position. 5
26 Inserting Cabinets Shelves Stand cabinet up. Insert shelf at a slight angle. Rotate shelf to horizontal position. Push shelf down into grooves. 5 6 Ensure shelf tabs engage in slots of side panel when lowering into position to secure. Insert remaining shelves. 6
27 Utility Access Insert rubber grommet into cut-out hole in bottom panel. Using box knife cut along perforation in rubber grommet to create hole. Utility hole allows easy access to electrical outlet. 7
28 Magnetic Racing Stripe Note: Racing stripe not available with diamond plate doors. The Racing Stripe can be installed on either door. To remove stripe follow steps -. Remove the plastic plugs holding in the racing stripe at the top of door. Tilt stripe off top of door. Lower and remove from slot on bottom of door. Attach Racing Stripe on opposite door following reverse order. HANDLE WITH CARE: Racing Stripe can easily bend and crease. 8
29 Manufacturer Warranty Limited Lifetime When this product is installed, operated and maintained according to the instructions attached to or furnished with the product, NewAge Products Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship for the Lifetime of the product. NEWAGE PRODUCTS INC. WILL NOT PAY FOR:. Service calls to correct the installation of any NewAge products or to instruct you how to use or install them.. Damage resulting from improper handling or shipping of products, or products damaged by accident, misuse, abuse, fire, flood, improper installation, acts of God, neglect, corrosion, modification or mishandling.. Products damaged by improperly loading beyond the specified maximum weight capacity outlined in the instructions provided with the product.. Repairs or replacement when your product is used in other than normal, single-family household use, such as a commercial environment, or handled in anyway inconsistent with the installation instructions included with the product. 5. Cosmetic damage, including scratches, dings, dents or cracks in paint that do not affect the structural or functional capability of the product. 6. Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal. 7. Replacement parts for NewAge products outside Canada and the United States. 8. Replacement keys or locking mechanisms. 9. Loss of product contents due to theft, fire, flood, accident or acts of God.. Shipping or freight fees to deliver replacement products or to return defective products.. Any labor costs during the limited warranty period. DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions. Call ; for UK 8..69; at info@newageproducts.com 9
Worktop. Weight Capacity. 100 lbs. 21 Corner Worktop. 48 Worktop. Fits over 2 Cabinets. 72 Worktop. Fits over 3 Cabinets. 200 lbs. 150 lbs.
Bold.0 Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping
More informationSTOP. Performance Plus 2.0 Series. hazard! ATTENTION: Is your cabinet damaged?
Performance Plus. Series Warning: Excessive Warning: Excessive weight hazard! weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave
More informationWorktop INDEX eight Capacity Unpacking
Pro.0 Series Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationInstall Instructions. NewAge Steel Welded Tall Locker
Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x
More informationHOME BAR SERIES 3 DRAWER BASE STOP. Warning: Excessive weight hazard! ATTENTION: Is your cabinet damaged?
HOME BAR SERIES 3 DRAWER BASE Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets.
More informationHOME BAR SERIES 3 DRAWER BASE
HOME BAR SERIES 3 DRAWER BASE Warning: Excessive weight hazard! Use two or more people to move, assemble or install wine cabinets to avoid back injury. Do not leave children unattended near cabinets. High
More informationHardware Box 1 1/4 Diameter x 3/4 Long Bolts 24 1/4 Nylon Lock Nut 24 1/4 Diameter x 3 Long Lag Bolt 8 1/4 Washers 56
Warning: Excessive weight hazard! Use two or more people to move, assemble or install overhead rack to avoid back or other injury. Do not leave children unattended near overhead rack. High risk of injury
More informationInstall Instructions READ THIS FIRST BEFORE UNPACKING CABINET WARNING: WARNING: Do not leave children unattended near cabinets.
24 age Steel RTA tool Cabinet RAD THIS IRST BOR UNPACKIN CABINT If you are having difficulty with the tool drawer assembly please view this installation video at www.newageproducts.com/tooldrawerinstall
More information65200-Series Cabinets Bar Aluminum Drawer Aluminum Sink Aluminum Door Aluminum 65200
32 2 Door Aluminum 65200 32 Sink Aluminum 6520 32 3 Drawer Aluminum 65202 32 Bar Aluminum 65203 33 Insert Grill Aluminum 5 Degree Aluminum Set 6520 65205 90 Degree Shelf Aluminum 65206 32 Bar Cart 65207
More information10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending
10-PIECE Garage Storage Set OWNER'S MANUAL Patent pending IMPORTANT When you open the cartons, carefully check the units and make sure there IS NO damage. If you have any problems with the units or with
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:
More informationTilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM
Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationP4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels
Low-Profile Tilting Portrait Mount for Flat-Panels 1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: 175 lbs. Warning Statements THE WALL STRUCTURE MUST BE CAPABLE
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Flat Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS P4263F Universal Low Profi le Flat Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS CTM-MS1 Flat Panel Display Mount (26 to 37 ) NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS PDS-PLUS Universal Projector Mount Model: NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationFIXED-POSITION WALL MOUNT FOR TVs in.
INSTALLATION GUIDE FIXED-POSITION WALL MOUNT FOR TVs 19-39 in. NS-HTVMFAB For wood-stud, solid concrete wall, or concrete block installations Safety information and specifications..... 2 Tools needed.............................
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Short Throw Projector Arm Model: UNI-STA/UNI-EXT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationAM500-U Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components Maximum Flat Panel Weight: 500 lb. / 226.79 kg. Wall Mount Bracket (Qty 2) Cross Bar 5/16 Flat Washers (Qty 6) Universal Spacers
More informationAST-2446 INSTALLATION INSTRUCTIONS
AST-2446 Suspension Adapter AST-2446 INSTALLATION INSTRUCTIONS Single Stud Installation Step 1. Secure the ceiling plate to the ceiling structure (see WARNING). Step 2. Use suitable hardware (commercially
More informationDual Arm Tilt LCD Mount
Installation Manual model # 51324 M o u n t i n g S y s t e m s Dual Arm Tilt LCD Mount Fits Displays 13 to 32 Supports Up to 50 lbs (23 kgs) Projection from Wall from 3 to 17 Meets VESA Standards 50/75/100,
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm for 37 to 47 Flat Panels Model: AM80 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationPWM-T210 Installation Instructions UNIVERSAL FLAT PANEL MOUNT
UNIVERSAL FLAT PANEL MOUNT IN-PWMT210.R0 TABLE OF CONTENTS Warning Statements 3 Parts List 4 Installation Tools 4 Locating the Center of the 5 Mounting Bracket Positioning 5 Securing the Mounting Brackets
More informationShop Style Miter Saw Stand Kit
Quality Power Tool Accessories OWNER S MANUAL Assembled Unit Shown Without Shelves & Wings Assembled With Shelves & Wings Shop Style Miter Saw Stand Kit Model 2850 IMPORTANT Read and understand all safety
More informationINSTALLATION MANUAL SFM3
INSTALLATION MANUAL SFM3 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-SFM3.R0 Table of Contents WARNING STATEMENTS...- 3 - PARTS LIST...- 4 - INSTALLATION TOOLS...-
More informationPAM-200 Universal Projector Mount
INSTALLATION MANUAL PAM-200 Universal Projector Mount Sony Electronics 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-PAM200.R0 Table of Contents Parts List...- 3 - Installation Tools...-
More informationImportant Loading Information. Tools Required. Meridian Lateral Files Instructions
Y Meridian Lateral Files Instructions! WARNING Failure to observe stated capacities below will result in unsafe usage conditions, causing possible product damage or personal injury. Important Loading Information
More informationNOVA-EXT Versatile Projector Mount Model: NOVA-EXT
INSTALLATION MANUAL NOVA-EXT Versatile Projector Mount Model: NOVA-EXT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations
More informationPowered by. For further installation assistance: prxperformance.com/pages/murphy-rack
Powered by The 90 Fold-in Murphy Rack is made by the creators of the original Profile Folding Rack at PRx Performance and is Patent Pending. An up-to-date record of patents and patent pending items can
More informationTilting, Swiveling & Rotating Flat Panel Wall Mount
Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical
More informationAssembly Instructions
Thank You For Purchasing The Best Overhead Storage Rack Assembly Instructions Overhead Storage Rack 8 x 4 8 x 3 8 x 2 6 x 4 6 x 3 6 x 2 4 x 4 Two 8 x4 Racks Pictured P.O. Box 714, El Cerrito, CA 94530
More informationFSM / FULL SWING WALL MOUNT. For Flat Panel Screens. User Manual
FSM- 3760 / FULL SWING WALL MOUNT For 37-60 Flat Panel Screens User Manual Thank you for choosing Gabor. Thank you for choosing Gabor s full swing flat panel screen wall mount. This heavy-duty wall mount
More informationMONKEY BARS OVERHEAD RACK INSTALLATION
MONKEY BARS OVERHEAD RACK INSTALLATION Thank you for purchasing the New Monkey Bars Overhead storage rack. The most innovative overhead rack on the market WARNING THE PROPER INSTALLATION OF THIS STORAGE
More informationHEAVY DUTY 11 STEEL CABINET
HEAVY DUTY STEEL CABINET ASSEMBLY INSTRUCTIONS ONE DRAWER BASE CABINET 05-206 Parts List Part No Description Qty Image ONE DRAWER BASE CABINET Part No Description Qty Image SB- Cabinet Body EH-0 Euro Hinge
More information4 BAY Low Profile WALL MOUNT CABINET
D1/347 SSEMLY INSTRUCTIONS 4 Y Low Profile WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationGearBoss Shelving System
Assembly/Owner s Manual GearBoss Shelving System CONTENTS Safety...........................................2 General......................................2 Installation...................................2
More informationGearBoss AirPro Locker
Installation and Owner s Instructions GearBoss AirPro Locker Wall Installation Island Installation Contents Important User Information...........................2 General...2 Manufacturer...2 Intended
More informationSB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL
SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FLIP Flip-Down LCD Mount NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial
More informationGearBoss II High Density storage
Assembly/Owner s Manual GearBoss II High Density storage contents Safety...........................................2 General......................................2 Installation...................................2
More informationINSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationPFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS
Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS 9531-007-Z00-01 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 5 Concrete Surface Installation
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationINS T A L L A TIO N INS T R U C TIO N S. Ceiling Mount Track System
Ceiling Mount Track System 10.26.2016 Specifications Ceiling Post: Unassembled 2-7/8 Assembled 1-11/16 7/8 7-9/16 5-7/8 3/8 2 Tubes 1/2 2-3/8 5 Parts and Tools Tools Needed Tape Measure Pencil Drill with
More informationLCD DISPLAY MOUNT
I N S T A L L A T I O N M A N U A L 38-804769-01 LCD DISPLAY MOUNT WWW.CHRISTIEDIGITAL.COM Contents - Assembly drawing - Securing the bottom wall plate - Fine tune adjustments - Marking the top plate mounting
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More informationCeiling Mount - 32" to 60" - Single Installation Instructions
Ceiling Mount - 32" to 60" - Single Installation Instructions Important Safety Information Use proper safety equipment during installation If you don't understand the installation instructions, have any
More informationhttps://www.wallbedsbywilding.com/wallbed-installation-studio-series/
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationALUMINUM HEADKNOCKER RACK P/N HKRS4-1 / HKRS5-1
ALUMINUM HEADKNOCKER RACK P/N HKRS4-1 / HKRS5-1 Package Contents: PARTS (1) CROSS BAR (2) LEGS WITH FEET (2) T BRACKETS (1) SCREEN ASSEMBLY (2) SCREEN L MOUNTS (2) LOWER SCREEN MOUNTS (2) LOAD SECURE POSTS
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Polaris Universal Projector Mount Model: NORTH AMERICA 1321 S. State College Blvd. Fullerton, CA 92831 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations
More informationroom essentials >> assembly instructions Drawer dresser w/ door Video instruction as Help to assembly, scan the QR code and see the video.
room essentials 4 Drawer dresser w/ door DPCI # 249-05-0418 (Black Woodgrain) DPCI # 249-05-0419 (Virginia Walnut) >> assembly instructions 92380 Video instruction as Help to assembly, scan the QR code
More informationPFW Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Maximum Flat Panel Weight: 100 lb. / 45.35 kg. Included Components Wall Mount (Qty 1) Extension Bracket (Qty 1 Pair) Bracket (Qty 1 Pair) 5/16 Flat Washers (Qty 4) Universal Spacers (Qty 8) M5 Allen Driver
More informationWorkbench Instructions for Assembly
Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...
More informationAssembly and Installation Guide
The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"
More informationINSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationASSEMBLY INSTRUCTIONS TALL CABINET - MODEL CS30
ASSEMLY INSTRUCTIONS TALL CAINET - MOEL CS30 To avoid SERIOUS INJURY or AMAGE to personal belongings: O NOT overload the cabinet or the shelves, maximum weight limit for feet or caster installation is
More informationMedia Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
More informationCabinet Storage Products
Assembly Instructions Storage Products (UltraStor, Acoustis, Adjustable Shelf, Cover Panels, Closure Panels) Wood Compartment Doors Full Wood Door Compartment Grille Doors Full Grille Door No Doors Contents
More informationOne Shelf, Wall Mounted A/V Component Stand Installation Guide Model: EX101SS
One Shelf, Wall Mounted A/V Component Stand Installation Guide Model: EX0SS For technical assistance or troubleshooting please call -855-994-3832. This product is intended for use only with Audio/Video
More informationRESIDENTIAL MOTORIZED STORAGE UNIT
BY V-BRO PRODUCTS RESIDENTIAL MOTORIZED STORAGE UNIT Model: GGR220 INSTALLATION AND OPERATING INSTRUCTIONS Distributed Exclusively by V-BRO PRODUCTS For technical questions and replacement parts, please
More informationBase Cabinet w/drawers
Base Cabinet w/drawers WSBC-4C Dark Cherry finish WSBC-4W White finish ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED Pacific Standard Time: 8:30 a.m.
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating
More informationInstallation Manual Flat Track Series
Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS AM2 / AM2-B Articulating Swingout Arm NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone:
More informationVideo Wall Installation Instructions 2W X 3H, 3W X 3H
Video Wall Installation Instructions 2W X 3H, 3W X 3H www.microndisplaysolutions.com Table of Contents Important Safety Instructions... 3 Configuration... 4 Package Contents, included and optional items...
More informationINSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD
For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm Model: AM300/AM300-B NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations
More informationSB-WM-ART2-L-BL SB-WM-ART2-XL-BL
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier
More informationMay 14, Installation Manual
May 14, 2012 Installation Manual Contents MAG TRACKER Components...1 Mount Installation...7 Module Installation & Grounding...11 Maintenance...14 Warranty......14 Contact Information......14 May 14, 2012
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationModels 2230 and 2240
Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform
More informationINSTALLATION MANUAL CTM-VESA
INSTALLATION MANUAL CTM-VESA Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com IN-CTMVESA.R1 PBL-110 Projector Mount Page
More information4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET
D1/347Mxl SSEMLY INSTRUCTIONS 4 Y Low Profile - SINGLE XL DISPLY WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use with video monitors weighing 300 lbs (136kg) or less. Use with
More informationCloset System Installation Manual
Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom
More informationPFW 6875 Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Maximum Flat Panel Weight: 160 lb. / 72.57 kg. Included Components Wall Mount (Qty 1) Extension Brackets (Qty 2) Bracket (Qty 1 Pair) 5/16 Flat Washers (Qty 4) Universal Spacers (Qty 8) M5 Allen Driver
More informationNetShelter VX. Four-Post Open Frame. User s Manual
NetShelter VX Four-Post Open Frame User s Manual Contents Product Overview......................... 1 NetShelter VX Four-Post Open Frame models 1 Product Inventory......................... 2 Features of
More informationSide Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY
Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationInstallation Instructions
Tilt/Pivot Mount Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 techsupport@mounts.com www.mounts.com IN-PTMB.R0 TABLE OF CONTENTS Warning Statements
More informationPlanar FWMG-MXL INSTALLATION INSTRUCTIONS
Planar FWMG-MXL INSTALLATION INSTRUCTIONS Fixed Wall Mount for Ultra Large Displays 50-98 weighing less than 300 lbs. Part Number: 955-0217-00 Planar, A Leyard 1195 NW Compton Drive Beaverton, OR 97006
More informationPRIMO 56" FOOSBALL TABLE ASSEMBLY INSTRUCTIONS
PRIMO 56" FOOSBALL TABLE ASSEMBLY INSTRUCTIONS NG1035 THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the highest possible
More information19 to 39 TV WALL MOUNT - FULL MOTION
19 to 39 TV WALL MOUNT - FULL MOTION RF-HTVMMAB For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...5
More informationModels 2130 and 2140
Models 2130 and 2140 Overview... 2 Tools Needed... 2 Hardware... 2 Assembly... 3-10 Installation...11 Operation... 11 Maintenance... 12 Accessories...12 Limited Warranty... 12 Printed in USA 2007 Perform
More informationTilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040
Tilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040 20-40 66 lbs. Supports VESA sizes up to: 200x200 For technical assistance or troubleshooting please call 1-855-994-2825 or visit
More information16 STEEL CABINET HEAVY DUTY
HEAVY DUTY 16 STEEL CABINET ASSEMBLY INSTRUCTIONS SIX DRAWER BASE CABINET 12-2013 Parts List Part No Description Qty Image SIX DRAWER BASE CABINET Part No Description Qty Image SB-1 Cabinet Body 1 SLD-01
More informationINSTALLATION MANUAL SFM2
INSTALLATION MANUAL SFM2 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-SFM2.R1 Table of Contents WARNING STATEMENTS... - 3 - PARTS LIST... - 4 - INSTALLATION TOOLS...
More informationLC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60
More informationSelect Lab Fixed Height Workstation
Assembly Instructions Select Lab Fixed Height Workstation Contents Important User Information.............................. 2 Safety Precautions.................................... 3 Required Tools........................................
More informationAssembly and installation help
Assembly and installation help A supplement to the directions The Purpose of this tutorial is to expand (not replace) upon the directions that come with the system and to help provide shortcuts, the first
More informationASSEMBLY INSTRUCTIONS FOR HAULER II UNIVERSAL CAMPER SERIES RACKS
ASSEMBLY INSTRUCTIONS FOR HAULER II UNIVERSAL CAMPER SERIES RACKS C11U2873-1 shown above Package Contents: HARDWARE KIT PARTS (4) 3/8-16 x 3 CARRAIGE BOLTS (1) RAIL DRIVER S SIDE ASSEMBLY (20) 3/8-16 x
More information