Handmade quality! Hand-cut Rasps 186. Machine-cut Rasps 188. Dreadnought Rasps, Plane- and Saw Rasps 189. Files for Metal and Wood 190

Transcription

1 Handmade quality! Hand-cut Rasps 186 Machine-cut Rasps 188 Dreadnought Rasps, Plane- and Saw Rasps 189 Files for Metal and Wood 190 Files for Knive-Makers 193 Diamond Files 194 Files for Wood and Wood-based Materials 194 Sets, Handles and Accessories 195 Order hotline: Telephone +49 (0)

2 rasps and Files Hand-cut rasps Cut by masters, cherished by experts: Until the early 20th century, the teeth of rasps were cut exclusively by hand (using a special pointed punch and hammer) into the body of the rasp before it was hardened. Because of the slightly varying depths and distances of the individual teeth, the work face is slightly inhomogeneous in texture. this leads to a smoother cutting performance on fibrous material such as wood (no»chattering«). For this reason, professionals still prefer hand-cut rasps even today. Precision Rasps Herdim rasps are hand-cut rasps which are manufactured in countless worksteps by the»last of their craft«. the smoothing and shaping of the blank, cutting of the teeth, meticulous hardening, annealing and trueing are typical manufacturing steps of the handmade rasp. Up to teeth, each one raised individually with a hammer and special pointed punch, ensure smooth results without becoming clogged. Made of hardened carbon steel, the rasps are highly durable. the tangs are annealed. A B C D E A HerDIM PreCISIon rasp, Flat WItH HanDle tang 3 25 x 5 mm 200 mm No x 5 mm 200 mm No x 5 mm 200 mm No D HerDIM PreCISIon rasp, HalF-roUnD 3 20 x 5 mm 200 mm No x 6 mm 150 mm No x 6 mm 200 mm No B HerDIM PreCISIon rasp, Flat 5 10 x 4 mm 125 mm No x 4 mm 150 mm No x 5 mm 200 mm No HerDIM PreCISIon rasp, Flat»ULTRA«Up to teeth x 5 mm 200 mm No C HerDIM PreCISIon rasp, CaBInet 3 27 x 5 mm 200 mm No x 5 mm 200 mm No x 6 mm 250 mm No x 4 mm 150 mm No x 5 mm 200 mm No HerDIM PreCISIon rasp, CaBInet»ULTRA«Up to teeth x 5 mm 200 mm No E HerDIM PreCISIon rasp, HalF-roUnD, SlIM 3 10 x 4 mm 150 mm No x 4 mm 150 mm No F F HERDIM PRECISION RASP, CABINET WITH BIRCH BARK HANDLE Multi-purpose precision cabinet rasp no with a fine cut. Comes with fitted birch bark handle. Birch bark is naturally anti-fungal and anti-bacterial, water-repellent, highly moisture-resistant and slip-proof even when wet. the handle provides a good grip even in perspiring hands. Comes in cotton pouch. Cut 5, cut length 200 mm No

3 Rasps and Files a A Herdim Rifflers, 8-Piece Set Crafted and hardened with great care by master craftspeople. For shaping convex and concave surfaces. The teeth are cut on both sides, the ends bent in opposite directions. Square mid-section. Comes in a leather roll. Flat, warding, trapezoid, square, three-square, half-round, crossing, round. Cut 4 Cut length 55 mm Overall length 185 mm No Tips for care: When storing, avoid contact with other rasps and metal tools Do not hang on magnetic bars Store individually in a wooden rack If possible, wear thin cotton gloves when working, as the teeth edges corrode when they come in contact with sweat from your hands Clean rasps with a brass brush No , page 195 Remove residual resin by dipping the rasp in turpentine oil No , page 275 b c d e f g h i j Hattori Rasps Our portfolio of Hattori rasps, which are cut in small batches by hand, is unique throughout Europe. Due to their special shape, they can be used universally and offer good value for money. The arched arrangement of the teeth makes these rasps incredibly effective and provides smooth results. Blades made of C45 carbon steel. b Hattori Rasp, Flat, crossing Extra Wide Cut 4 Cross section 40 x 4 mm Cut length 240 mm No C Hattori Shoemaker s Rasp, 4 Variations Half-round, flat, each with a coarse rasp and file cut. For leather and wood. Cross section 23 x 5 mm Cut length 90 mm Overall length 200 mm No d Hattori Rasp, Flat with Handle Tang 3 24 x 4 mm 200 mm No e Hattori Rasp, Flat 4/6 25 x 4 mm 210 mm No x 3 mm 120 mm No f Hattori Rasp, Cabinet Special Extra long, very thin cabinet rasp with a fine cut x 4 mm 350 mm No g Hattori Rasp, Cabinet 3 25 x 5 mm 200 mm No x 5 mm 210 mm No h Hattori Rasp, Crossing 5 15 x 3.5 mm 130 mm No x 4.5 mm 200 mm No x 3.5 mm 100 mm No i Hattori Rasp, Round Cut Ø Cut length 2 8 mm 240 mm No mm 160 mm No j Hattori Rasp, Half-Round 6 15 x 4 mm 130 mm No x 2.5 mm 100 mm No

4 rasps and Files B C D A A HATTORI RASPS, 4-PIECE SET Four Hattori rasps: 200 mm flat rasp, 200 mm cabinet rasp, 150 mm slim half-round rasp, 85 mm riffler. Cut 4 No B HattorI rifflers, 8-PIeCe Set eight rasps, each with different head shapes, suitable for a variety of applications in stairbuilding and sculpting and soapstone working. Cut 3. Small overall length 180 mm Cut length 50 mm No Medium overall length 200 mm Cut length 50 mm No Large overall length 250 mm Cut length 70 mm No C HattorI MInI-rIFFlerS, 5-PIeCe Set For model-making, making musical instruments etc. Cut 4 Cut length mm overall length mm No D router BItS, 5-PIeCe Set With a coarse rasp hand-cut, for wood and plastic. Ø 16 mm Shaft diameter 6 mm No Machine-cut rasps front back H H F.D. rasp Standard rasps for working on wood, plaster and soapstone HrC. Cut 2. E E GlarDon/vallorBe HaBIlIS F GlarDon/vallorBe needle rasps, 5-PIeCe Set Precision rasps with rectangular handle tangs HrC. 5-piece set: flat, half-round, three-square, square, round. Cut 3 Cut length 100 mm overall length 205 mm rasps, 6-PIeCe Set Precision needle rasps with round handle tangs, HrC. 6-piece set: flat, warding, half-round, three-square, square, round. Cut 4 Cut length 75 mm overall length 140 mm No No F G G GlarDon/vallorBe HooF rasp FIle 912 large rasp/file which can be used on both sides: extra coarse rasp teeth on one side and a very coarse file pattern on the other. Features a very long service life when used as a hoof rasp. also ideal for softwood, plastics, soapstone, etc. Cross section 45 x 5 mm Cut length 270 mm No Flat Rasp Cross section 20 x 5 mm Cut length 200 mm No Half-Round Rasp Cross section 25 x 7 mm Cut length 250 mm No Cabinet Rasp Cross section 24 x 5 mm Cut length 200 mm No

5 Rasps and Files Dreadnought Rasps, Plane- and Saw Rasps Turbo Saw Rasps All woodworkers appreciate the sharpness of Japanese saws. As many as ten of these blades are arranged in a diamond-shaped grid on these Japanese saw rasps. The cutting surfaces feature tooth spacings of 1 and 2.5 mm, in order to gain a rough side for fast removal of material and a fine side for smoothing. Use: Working on wood, light metals, plastic and plaster Advantages: Effective abrasion No clogging a Turbo Saw Rasp, Straight Handle Cut length 275 mm Overall length 385 mm No b Turbo Saw Rasp, Cranked Handle This saw rasp with cranked handle allows working with higher surface pressure making it particularly suitable when a b dressing flat stock. The blade is easily reversed and can be replaced. Cut length 255 mm Overall length 390 mm No Repl. Blade No For Arbortech TurboPlane, Auriou Rasp Blade and other tools for quick abrasion see chapter»sculpting Tools«. Microplane Rasps Unbeatable removal of material thanks to hundreds of fine blades. In a patented chemical process, a grid of teeth is etched from the raw blade material. Unlike punched teeth, the teeth created in this process are burr-free and sharp. The stainless steel blades are hardened to 60 HRC for a long edge life. d d Microplane Snap-in Rasp, Basic Set Snap-in handle with replaceable blades for use in a push or pull direction. Includes two flat blades, coarse and fine. e Saw Rasp available online. Cross section 26 x 9 mm Cut length 200 mm Overall length 380 mm No Use: Universal use for sculpting and cabinetmaking Advantages: Dust-free working Effective abrasion 1 2 E Microplane Snap-In Blades c Microplane Plane Rasp, Round, Large Coarse teeth. Cut length 200 mm Overall length 325 mm Ø 16 mm No c 1 Flat - fine Cross section 26 x 9 mm No Flat - coarse Cross section 26 x 9 mm No Round - coarse Ø 25 mm No f f Microplane Rotary Shaper Shaping head for use in drills, aluminium body with cutter insert. Overall length 70 mm Ø 50 mm Shaft diameter 8 mm No Repl. Blade No »Microplane rasps are ideal for making bows. They cut faster than any other rasp and leave a clean surface behind.«michael Wolf, Bowmaker»Microplane rasps are ideal for making bows. They cut faster than any other rasp and leave a clean surface behind.«michael Wolf, Bowmaker 189

6 rasps and Files Lie-Nielsen Floats the term»float«for an extra-coarse single-cut file goes back to the 19th century. Formerly developed for making wooden plane bodies, they are now also used for surfaces that are difficult to work on in cabinetmaking. a hardness of 52 HrC allows resharpening by hand. Use: For hard materials and end grain For making wooden plane bodies For finishing mortises Advantages: Creates smooth surfaces Controlled removal of material allows precise working Resharpenable A B A lie-nielsen BeD Float Special float for finishing wooden plane bodies. rectangular maple handle. Cross section 26 x 5 mm Cut length 150 mm overall length 320 mm No B lie-nielsen MortISe Float Slim float for the precise finishing of mortises. octagonal, tapered maple handle. Cross section 12 x 6 mm Cut length 90 mm overall length 245 mm No Superhard File Rasps robust rasps for working on hard materials. the sharp, curved blades remove material effectively and divert the chips towards the side. Hardened to over 60 HrC for extremely long edge lives. Use: Composites, synthetic materials Rough shaping in sculpting C SUPerHarD FIle rasp Advantages: Allows working on glued joints Effective abrasion Smooth surfaces No clogging 1 Plastic Handle, Flat, Coarse/Medium Double-sided cut. Cut length 180 mm overall length 280 mm Width 19 mm No Plastic Handle, Half-Round, Medium Single-sided cut. Cut length 180 mm overall length 280 mm Width 19 mm No Handle Tang, Half-Round, Medium Single-sided cut. Cut length 120 mm overall length 200 mm Width 16 mm No Handle Tang, Half-Round, Ultrafine Single-sided cut. Cut length 110 mm overall length 200 mm Width 10 mm No C Files for Metal and Wood D F.D. Flat FIle, SInGle CUt Precision flat file made by long-established German company Friedrich Dick. Single-cut design for high surface quality. narrow sides hewed. German cut 2. D Cross section Cut length E F.D. CHIP BreaKer FIle, 21 x 3 mm 200 mm SInGle CUt No the special diamond pattern ensures 25 x 4 mm 250 mm smooth gliding strokes, resulting in a No smooth surface with high chip removal. the pattern also acts as a chip breaker. Suitable for a variety of softer materials E such as cast-iron, bronze and brass, but also for untempered steal. one narrow side cut. Cut length 200 mm Cross section 20 x 4 mm No Single-cut Single-cut file The single-cut file has parallel flutes (teeth), extending diagonally across the face of the file. Uses: Sharpening saw blades For an extremely fine finish Advantages: No clearance between teeth, meaning low cutting pressure, which is an advantage with thin materials Lack of clearance between teeth produces very smooth surfaces Disadvantages: File does not stay true as easily 190

7 Rasps and Files Glardon/Vallorbe Files The traditional Swiss company Glardon/Vallorbe makes top-quality precision files which meet the high quality standards of the watch industry. 200 years of experience come to the fore in excellent durability and sharpness. The files are designed for working steel, but they are equally suitable for fine working of wood, aluminum, brass and hard plastics. Hardened to HRC. a b c d e A Glardon/Vallorbe Flat File One narrow side cut. Double cut x 5 mm 200 mm No x 6.5 mm 250 mm No x 2 mm 150 mm No x 4 mm 150 mm No x 5 mm 200 mm No x 6.5 mm 250 mm No x 2 mm 100 mm No x 2 mm 150 mm No x 4 mm 150 mm No x 5 mm 200 mm No x 6.5 mm 250 mm No x 3 mm 100 mm No x 2 mm 150 mm No x 4 mm 150 mm No x 5 mm 200 mm No x 2 mm 150 mm No x 5 mm 200 mm No x 5 mm 200 mm No x 5 mm 200 mm No C Glardon/Vallorbe Crossing File Double cut x 6 mm 200 mm No x 4.5 mm 150 mm No x 6 mm 200 mm No x 4.5 mm 150 mm No x 6 mm 200 mm No d Glardon/Vallorbe Half-Round File Double cut x 6 mm 200 mm No x 4.5 mm 150 mm No x 6 mm 200 mm No x 4 mm 125 mm No x 4.5 mm 150mm No x 6 mm 200 mm No x 4.5 mm 150 mm No x 6 mm 200 mm No x 4.5 mm 150 mm No x 6 mm 200 mm No x 4.5 mm 150 mm No b Glardon/Vallorbe Warding File Slender, with cut sides. Double cut x 1.7 mm 150 mm No x 1.7 mm 150 mm No E Glardon/Vallorbe Half-round File, Slim Files for bow tips, violin f-holes. Double cut x 3 mm 150 mm No x 3 mm 150 mm No While the German system of cuts uses mainly cut 1 to 5, Glardon in Vallorbe produces a globally unique range of coarser cuts starting from»000«, which are especially popular for woodworking. The long-established Swiss company also manufactures files with extremely fine cuts beyond the familiar cut 5 - they go up to cut 8. Glardon/Vallorbe files are distinguished from other products by their regular tooth profile up to the edge, quality of hardness, long service life and meticulous workmanship. And all files have something else in common: They are manufactured in Switzerland, with unrivalled precision since

8 rasps and Files Double Cut First, parallel flutes are cut in the surface of the file, as with a singlecut file, and then it is cut crosswise again. this is referred to as first cut and second cut. The first cut forms the cutting teeth, while the second cut divides them and acts as a chipbreaker. tang First cut Second cut Shoulder Uses: Universal use Advantages: File stays true File does not clog A B A GlarDon/vallorBe round FIle Highest precision files, cut extends right to the tip. Double cut mm 150 mm No mm 75 mm No mm 90 mm No mm 100 mm No mm 38 mm No mm 50 mm No ,5 mm 55 mm No mm 65 mm No B GlarDon/vallorBe HaBIlIS FIle Habilis files have slender square tangs which serve as handles, making them suitable for particularly delicate work HrC. Double cut. Cut 1. overall length 215 mm Cut length 105 mm Shape Cross section 1 Flat 10 x 2.6 mm No Half-round 12.2 x 3.4 mm No three-square 9.4 mm No Square 5.8 x 5.8 mm No round 6.5 mm No Glardon/Vallorbe Habilis Files, 5-Piece Set Price advantage 5-piece set in case: flat, half-round, three-square, square, round. Cut length 105 mm overall length 215 mm No C C GlarDon/vallorBe needle FIle For precision work on metal and wood. With round, knurled steel handle. Hardened to HrC. Cut 0 = coarse, cut 1 = medium. Double cut. Cut length 75 mm overall length 140 mm Shape Cut Cross selection 1 Flat 0 5 x 1 mm No Flat 1 5 x 1 mm No Warding x 1.4 mm No Warding x 1.4 mm No three-square 0 3 mm No three-square 1 3 mm No Square mm No Square mm No round mm No round mm No Barrette x 1.4 mm No Barrette x 1.4 mm No Half-round 0 5 x 1.8 mm No Half-round 1 5 x 1.8 mm No Glardon/Vallorbe Needle Files, 6-Piece Set Price advantage 6 files in case: flat, half-round, threesquare, square, round, barrette. Cut 0 No No D PreCISIon HanD GrInDer nt lasts 50 times longer than sandpaper: For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Particularly suitable for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy diecast aluminium handle, shoe with easy to remove and replaceable hardened steel grinding plate. Sand on a sample piece first. Surface of the sanding pad may leave black stains during first use (anti-corrosion coating). this is no sign of bad quality and only occurs during first contact with wood. Grit approx D Sanding Platen Triangular, Pointed length 80 mm Width 7-28 mm No rep. Grinding Plate No Sanding Platen Rectangular, Slim length 150 mm Width 24 mm No repl. Grinding Plate No Sanding Platen Rectangular, Broad length 150 mm Width 50 mm No repl. Grinding Plate No

9 Rasps and Files Files for Knife-makers a b 1 2 c d 1 2 e Glardon/Vallorbe Valtitan Files The perfect files for knife-makers: The hardest of all toothed files. They allow materials which have been considered impossible to file, e.g. hardened steel, to be filed without breaking teeth. Other advantages: Valtitan files do not clog, they are largely rust-proof and even more powerful. They impress users with greater chip removal and longer service life (see chart). Performance in relation to standard Glardon/Vallorbe precision files a Glardon/Vallorbe Valtitan Flat File Double cut. Cut 0. One narraow side cut. Cross section Cut length x 6.3 mm 250 mm No x 4.8 mm 200 mm No x 4 mm 150 mm No b Glardon/Vallorbe Valtitan Pillar File Double cut. Cut 0. Cross section Cut length x 4.5 mm 200 mm No x 4 mm 150 mm No c Glardon/Vallorbe Valtitan Three-Square File Double cut. Cut 0. Width Cut length 14.2 mm 200 mm No d Glardon/Vallorbe Valtitan Half-Round File Double cut. Cut 0. Cross section Cut length x 6.3 mm 200 mm No x 4.7 mm 150 mm No e Glardon/Vallorbe Valtitan Round File Double cut. Cut 0. Ø Cut length 7.5 mm 200 mm No Steel with 13 % chrome Stainless steel Amount of abraded material Service life f g f F.D. Checkering File To prevent the fingers from slipping, checkerings are cut into knife handles and on the backs of blades. The checkering file is especially suited for this task. The extraordinary cut originates through lengthwise grooves in the blade which are crossed by 90 grooves. Through this cut small teeth are formed which cut on the push stroke. To produce the checkering the file is moved in one spot forward and backwards. Suited for wood, non-ferrous metals and unhardened steel. Cut 00 Cross section 19 x 5.2 mm Cut length 150 mm No g F.D. Mill Saw File The ideal file for the ambitious knife-maker, who makes his own blade. The round edges help to file the transition from the blade to the ricasso, an area which is an important attribute of a high quality blade. Cut 3 Cross section 20 x 3.5 mm Cut length 200 mm No

10 Rasps and Files Diamond Files Diamond Files, Monocrystalline High-quality diamond files with monocrystalline diamond coating for long edge life and even, effective abrasion. This diamond shape is similar to that of natural diamonds, ensuring the highest hardness of all materials. It is suitable for working hardened steel, hard metal, glass, ceramics etc. Diamond Files, Polycrystalline Simple standard diamond files for working hard materials such as hardened steel, glass or ceramics. a Diamond File, Monocrystalline with Tang This robust file with handle tang is ideal for fast and effective removal of material on large surfaces, e.g. on hardened knife blanks. Flat 10.5 x 3 mm Coating length 100 mm Overall length 225 mm a Grit D126 No Grit D91 No More monocrystalline diamond files available online. b b Diamond Needle Files, Polycrystalline, 5-Piece Set Flat 9 x 2.3 mm, half-round 9 x 3 mm, square 4.5 mm, three-square 6 mm, round 5 mm. Grit D107 Coating length 70 mm Overall length 180 mm No c c Diamond Needle Files, Polycrystalline, 10-Piece Set Flat 6 x 1.5 mm, half-round 5 x 2 mm, square 2.5 mm, three-square 3.5 mm, round 3 mm, warding 5 x 1.5 mm, knife-shaped 5 x 1.5 mm, barrette 5 x 2 mm, crossing 5 x 2 mm, crossing 3.5 x 2.5 mm. Grit D107 Coating length 50 mm Overall length 140 mm No Monocrystalline vs. polycrystalline Basically, there are two different manufacturing processes in which either monocrystalline (similar structure to a natural diamond) or polycrystalline diamonds are created. Monocrystalline: Higher wear-resistance, ensuring a long edge life Higher microblade quality, producing smooth results Hardest material, allowing you to work on all materials Polycrystalline: High resistance to pressure Under pressure, the diamond coating breaks up to form smaller, even-sized abrasive particles which remove less material and reduce the edge life Grit comparison D91 = Grit P D107 = Grit P D126 = Grit P Files for Wood and Wood-based Materials d F.D. Wood File, Cabinet The classic file for cabinetmakers. Cut 1. 1 Cut length 250 mm Cross section 29 x 5.3 mm No Creating a hewn file tooth Chisel blade 2 Cut length 300 mm Cross section 35.5 x 6 mm No File e F.D. Wood File, Half-Round Special knife cut for high efficiency. Cut 0. 1 Cut length 200 mm Cross section 21 x 6 mm No Cut length 250 mm Cross section 25 x 7 mm No d 1 2 e 1 2 To create a single tooth, a wedge-shaped chisel blade cuts into the file body, raising a tooth profile by displacing the file material on both sides behind the chisel blade. The raised profile and the depth and angle of the teeth depend on various factors, such as the impact, chisel angles and striking speed as well as the subsequent hardening process. 194

11 rasps and Files A F.D. all-purpose FIle Ideal for general use due to the two different cuts on the flat sides. the rough side is used to remove material quickly while the finer side is suited for surface finishing. recommended for wood, soft metals and plastic. Plastic or rubberised handle. one narrow side cut. 1 Cut length 100 mm Cross section 10 x 4 mm No Cut length 200 mm Cross section 20 x 5 mm No Cut length 250 mm Cross section 25 x 6.3 mm No A Sets, Handles and accessories B B Key FIleS WItH WooDen HanDleS, 6 PIeCe-Set Set of six key files with wooden handles in a traditional metal case. Ideal for precise work on metal and wood. Set contains: Flat, warding, three-square, square, half-round and round. overall length 180 mm Cut 2 Cut length 100 No C D D FIle and rasp Set, 3-PIeCe Set this set comprises the three most common file and rasp models for working wood, metal and plastic and is thus a must for every workshop. a simple tool roll protects the tools from dirt and damage during transport. Handles included. Set contains: Standard half-round rasp 250 mm for rough shaping, no Classic cabinet wood file 250 mm for finishing wood and soft plastic, no Flat file double cut 200 mm for working metal and hard plastic, no No C FILE AND RASP SET WITH BIRCH BARK HANDLE, 2-PIECE SET tried-and-tested file/rasp combination, including high-quality fitted birch bark handle. Birch bark is naturally anti-fungal and anti-bacterial, waterrepellent, highly moisture-resistant and slip-proof even when wet. the handle provides a good grip even in perspiring hands. Comes in cotton pouch. Set contains: Standard half-round rasp 250 mm for roughly shaping wood, no Flat file double cut 200 mm for working metal and hard plastic, no No E FIle and rasp Set, 2-PIeCe Set Practical set for work in the field and in the workshop, consisting of the two standard tools metal file and rasp. Comes with already fitted file handle from untreated ash. Comes in cotton pouch. Set contains: Standard half-round rasp 250 mm for rough shaping of wood, no Flat file double cut 200 mm for working metal and hard plastic, no No E F G F SaW and FIle BrUSH robust Japanese brush for cleaning wet wood saws for garden and workshop as well as all types of files. the flexible plastic bristles prevent damage to scratch-sensitive teeth. overall length 220 mm No G FIle Cleaner For cleaning file and rasp teeth. Beechwood with brass bristles. overall length 250 Head 40 x 100 mm No

12 rasps and Files A 1 E I A PreCIoUS WooD HanDle Patterned after old english models. Polished, oiled ferrule. 1 Slim Drop-shaped Design, Padouk 15 mm 85 mm No mm 90 mm No Octagonal-shaped Design 15 mm 130 mm No mm 130 mm No B B ash HanDle, SlIM DroP-SHaPeD Patterned after old english models and turned from ash, smoothly sanded, solide ferrule. 15 mm 85 mm No mm 90 mm No C 2 E BoxWooD HanDle, Ball-SHaPeD Polished boxwood, solid ferrule. 18 mm 105 mm No mm 105 mm No mm 105 mm No F ash HanDle, Ball-SHaPeD Smoothly sanded ash handel with a solide ferrule. 22 mm 105 mm No mm 105 mm No mm 105 mm No G F G UnIverSal HanDle, ash octagonal, with a round neck. Smoothly sanded, untreated ash. 15 mm 90 mm No mm 120 mm No I BIrCH BarK FIle HanDle Birch bark is naturally anti-fungal and anti-bacterial, water-repellent, highly moisture-resistant and slipproof even when wet. the handle provides a good grip even in perspiring hands. Hornbeam handle core. Solid, turned steel ferrule at the handle join. Ferrule diameter 18 mm length 130 mm No Birch Bark only bark from Siberian birches is used for the handles. Central european bark is too thin for use in handicrafts. the material has C BoxWooD HanDle Polished boxwood, solid ferrule. 16 mm 70 mm No D ash HanDle, DroP-SHaPeD Smoothly sanded, ash handel. 16 mm 70 mm No D H H FIle HanDle, SCreW-In For files with pointed tangs, fastening via internal threads, plastic. Ø Internal thread length 7 mm 105 mm No mm 120 mm No an antiseptic effect, as it is antibacterial, antiviral and inhibits fungal growth. the soft and flexible bark has traditionally been shaped to form vessels, shoes, backpacks, knife sheaths, mats and baskets using weaving, sewing and tucking techniques - a material with virtually unlimited possibilities. Handle chart for rasps and files: Multiple references possible for each item fits no. fits no. fits no. fits no. fits no. fits no. fits no. fits no. fits no. fits no. fits no. fits no