PATINA Auction Lot List

Size: px
Start display at page:

Download "PATINA Auction Lot List"

Transcription

1 PATINA Auction Lot List LOT # 1 SAHRPENING STONES 2 DREMEL AND PRESS 3 ROTARY TOOL AND ACCESSORIES 4 DRILLING AND BORING TOOLS 5 ANVIL 6 MEASURING TOOLS 7 MISC HAND TOOLS 8 MISC MINI PWR TOOLS (4) 9 WOODEN TOOL CHEST 10 OSBOURNE HAMMER, ESTWING HATCHET 11 STANLEY #93 SHOULDER PLANE 12 MISC DRILLING TOOLS 13 SWAN NECKED GOUGE (6) 14 GOUGES (8) 15 BAG OF TRAMMEL PT. & MEASURING TOOLS 16 MISC DIVDERS AND CALIPERS 17 SANDVICK SAW, MISC WRENCHES, LEVEL 18 STANLEY #3 & STANLEY #7 PLANE 19 STARRETT GUAGES 20 CRAFTSMAN MADE TOOL CHEST ON STAND 21 TURNING TOOLS & CARVING GOUGES 22 BAG OF SMALL SPOKE SHAVES (2) 23 STANLEY #60-1/2, SMOOTHER PLANE & STANLEY SURFORM RASP 24 (4) HAND SAWS 25 WOODEN TOOL BOX 26 WOODEN TOOL BOX 27 MISC MEASURING TOOLS 28 (3) WOODEN PLOUGH PLANES 29 (10) WOODEN MOLDING PLANES 30 MISC SHOEMAKING /LEATHER TOOLS 31 TAP AND DYE SETS 32 MARKING GUAGES 33 MARKING GUAGES 34 MISC TRY SQUARES 35 MISC PANEL GUAGES 36 TORSION BALANCE SCALE 37 STAMPING LETTERS 38 MAHOGANY BOX 39 TOOL CABINET (OAK) 40 CRAFTSMAN ROUTER TABLE WITH BOSCH ROUTER 41 SPRING BALANCE 42 SIKES HYDROMETER

2 43 SEWING MACHINE OILERS 44 (3) GRADUATED BOXWOOD LEVELS 45 IVORY SECTOR 46 IVORY RULE 47 BRASS PLUMB BOB & LINE 48 STANLEY FOLDING CALIPER RULE 49 WOODEN SECTOR 50 FOLDING IVORY SECTOR 51 IVORY SCALE 52 STANLEY #77 DOWEL MAKER WITH CUTTER 53 RADIOFOR ELECTRIC MEDICAL DEVICE (FRENCH) 54 MARSH MITER VISE 55 EBONY POCKET LEVELS (3) 56 WOODEN POCKET LEVELS (3) 57 MACHINISTS LEVELS (3) 58 WOODEN POCKET LEVELS (3) 59 ILLUMINTED DR'S OFFICE SIGN 60 TURN SCREWS (5) 61 STANLEY #400 MITER VISE 62 DISSTON RIP SAW 63 WALL CLOCK 64 WOODEN PULLEY 65 GIMBLED HANGING LAMP 66 COLUMBUS SCALE 67 MISC TRY SQUARES 68 MISC SPOKE SHAVE WITH CHISEL PLANE & CRAFTSMAN MADE PLANE 69 EMMERT #40 VISE 70 HAND DRILLS (3) AND YANKEE SCREW DRIVER 71 STANLEY #81 SCRAPER & #5 PLANE 72 STANLEY #78 PLANES (3) 73 STANLEY #75, #110 & #130 PLANES 74 STANLEY #39 1/2" & #39 3/4" DADO PLANES 75 STANLEY #75, #3, & CRAFTSMAN #4 PLANES 76 STANLEY #71-1/2 ROUTER PLANE 77 STANLEY #45 WITH HOME MADE BOX 78 SPOKE SHAVES (5) 79 4 JAPANESE WATERSTONES WITH VERITAS HONING GUIDE 80 MISC CARD SCRAPERS AND BURNISHER 81 5 GOUGES AND 6 CHISELS WITH WOODEN MALLET WOODWORKING RELATED BOOKS 83 STANLEY TOOL GUIDE (PAPERBACK) 84 CLASSIC HANDTOOLS BY GARRETT HACK 85 STANLEY MITER BOX WITH BACK SAW 86 GLIDER CLOCK

3 87 MAGNIFIER ON STAND 88 2 WOODEN FORE PLANES AND 1 WOODEN TRY PLANE 89 MISC SAW SHARPENING TOOLS 90 BUCK SAW 91 9 HAND SAWS AND 1 BACK SAW 92 7 WOODWORKING BOOKS 93 4 WOODWORKING BOOKS 94 3 BLACKSMITHING BOOKS 95 2 WOODWORKING BOOKS BY KRENOV 96 2 BOOKS ON INDUSTRIAL REVOLUTION 97 4 BOOKS ON FOLK WOODCRAFT 98 2 BOOKS ON WOODWORKING 99 4 WOODWORKING BOOKS FRAMED ANTIQUE WOODWORKING TOOLS PICTURES 101 MISC LOGGING HOOKS AND CHAIN 102 VERITAS BENCH DOGS AND HOLD FAST WITH SURFACE VISE MISC ADJUSTABLE WRENCHES 104 MISC AXE HANDLES WOODEN PLANES AXE AND HAMMER HANDLES AXE AND HAMMER HANDLES 108 BIG BOX OF HAND PLANE PARTS LARGE WOODEN PLANES LARGE WOODEN PLANES LARGE WOODEN PLANES LARGE WOODEN PLANES WOODEN LEVELS 114 MISC IRON TOOLS 115 STANLEY BEDROCK #607 PLANE 116 STANLEY BEDROCK #605 PLANE 117 STANLEY BEDROCK #604 PLANE 118 STANLEY BAILEY #7 PLANE 119 STANLEY BAILEY #6 PLANE DOWEL CUTTERS AND 1 DOWEL POINTER STANLEY BLOCK PLANES MAN CROSSCUT SAW 123 MISC CLAMPS DOVETAIL SAWS WOODEN MOLDING PLANES AND 1 COFFIN SMOOTHER STANLEY T AND G PLANES #48, 49 & ONE UNION T&G PLANE BIT BRACES, MISC AUGER BITS AND 1 DOWELING JIG MARKING GUAGES AND AWL 129 FRAMING HATCHET 130 FROE

4 131 EAIA CHRONICLE WOODEN BOXES 133 FIBRE BOARD COFFEE BARREL 134 PLUMBERS TORCH 135 CRAFTSMAN MITER CLAMP KIT 136 WOODEN BOX MARKED CARBOY 137 LOGGING DOGS 138 FOOT ADZ (PAIR) 139 FOOT ADZ (PAIR) 140 STEELYARD AND WEIGHTS 141 FARRIER NIPPERS 142 CANDLE WICK TRIMMER 143 MISC IRON TOOLS BUTRESSES BAYONET AND 1 ICE HATCHET 146 MISC TAP AND DYE HANDLES 147 LOGGING DOGS 148 PANEL PINCHING DOGS DRAW KNIVES DRAW KNIVES DRAW KNIVES 152 BARKING SPUD AND LOGGING DOG 153 WOODEN HAND SCREW (1) WOODEN HAND SCREW WOODEN HAND SCREW 156 PAIR METAL FURNITURE CLAMPS SYTHES SYTHES AND 2 PRONG PITCH FORK HEAD 159 MISC IRON TOOLS PAIR STRAPPING PLIERS 161 PEAVY HARDWARE WRENCHES WRENCHES 164 MISC MEAT HOOKS 165 MISC MEAT HOOKS VOL SET TREASURY OF AMERICAN DESIGN WOODEN MOLDING PLANES WOODEN PLANES 169 CIGAR CUTTER AND MISC TOOLS WOOD TRY PLANE, 1 BARREL MAKERS PLANE n/a 2 COFFIN SMOOTHING PLANES & 5 MOLDING PLANES 171 CRANK DEVICE 172 BOX OF MISC TOOL PARTS 173 MISC HAMMERS AND MALLETS

5

Tool chest and contents by John Hilton.

Tool chest and contents by John Hilton. Tool chest and contents by John Hilton. Brown's auction, March 23, 2018 From the Auction Catalog: "This ingenious chest, which is featured at page 68 of Treasure Chests by Lon Schleining (Taunton Press

More information

South Australian Historical Tool Association. Auction Catalogue

South Australian Historical Tool Association. Auction Catalogue South Australian Historical Tool Association 21st March 2018 "Auction of Vintage Tools" Colonel Light Gardens RSL Auction Catalogue Conditions of Sale: 1. Bidders must be financial members of SAHTA Inc.

More information

FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R

FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK

More information

WASSCE / WAEC FURNITURE MAKING SYLLABUS

WASSCE / WAEC FURNITURE MAKING SYLLABUS WASSCE / WAEC FURNITURE MAKING SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. SCHEME

More information

Using hand tools Prepared by. Paul Roberts Neville Comins

Using hand tools Prepared by. Paul Roberts Neville Comins Using hand tools Prepared by Paul Roberts Neville Comins Why use hand tools? What hand-tools? Where to buy hand tools? Sharpening Power tools & machinery Conclusion Hand tools have many benefits such as:

More information

CATALOG March 2017 CATALOG FILES AND PLANERS. p. 1/26 Atttrezzi&utensili

CATALOG March 2017 CATALOG FILES AND PLANERS.   p. 1/26 Atttrezzi&utensili March 2017 CATALOG FILES AND PLANERS http://www.attrezzieutensili.it/en p. 1/26 Atttrezzi&utensili http://www.attrezzieutensili.it/en p. 2/26 Atttrezzi&utensili FILES AND PLANERS Hand planers Spare blades

More information

Green Woodwork. Mike Abbott. Workin~ with ;wood the natural way. Guild of Master Craftsman Publications. with a foreword by Richard La Trobe Bateman

Green Woodwork. Mike Abbott. Workin~ with ;wood the natural way. Guild of Master Craftsman Publications. with a foreword by Richard La Trobe Bateman Green Woodwork Workin~ with ;wood the natural way Mike Abbott with a foreword by Richard La Trobe Bateman Guild of Master Craftsman Publications Contents 1 Introduction 9 2 Why Work Wood Green? 15 3 Types

More information

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools? ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and

More information

ASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?

ASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails? ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

Cheap, Sturdy Workbench Christopher Swingley

Cheap, Sturdy Workbench Christopher Swingley Introduction heap, Sturdy Workbench hristopher Swingley The following bench is an inexpensive version of the Roubo workbenches shown in The Workbench ook by Scott Landis [1]. It s basically just a sturdy

More information

Estate Auction of the Late Ray A. Nissen

Estate Auction of the Late Ray A. Nissen Estate Auction of the Late Ray A. Nissen Auction Opens: Thu, Apr 20 8:00am ET Auction Closes: Thu, Apr 27 6:00pm ET 0001 2013 Honda Odyssey Van 0002 Acorn Superglide 120 Handicap Stairlift 0003 Pine Dining

More information

Class 8. Explanatory Note. Hand tools and implements (hand-operated); cutlery; side arms; razors.

Class 8. Explanatory Note. Hand tools and implements (hand-operated); cutlery; side arms; razors. Class 8 Hand tools and implements (hand-operated); cutlery; side arms; razors. Explanatory Note Class 8 includes mainly hand-operated implements used as tools in e respective professions. This Class includes,

More information

Thompson Auctioneers UNMATCHED CONDITION METAL AND WOODWORKING ITEMS HOME SHOP: MODEL BUILDER & PRECISION MACHINIST. Ended Sep 17, :42pm EDT

Thompson Auctioneers UNMATCHED CONDITION METAL AND WOODWORKING ITEMS HOME SHOP: MODEL BUILDER & PRECISION MACHINIST. Ended Sep 17, :42pm EDT Thompson Auctioneers UNMATCHED CONDITION METAL AND WOODWORKING ITEMS HOME SHOP: MODEL BUILDER & PRECISION MACHINIST 986 Riverview Ct Xenia Ohio 45385 United States Ended Sep 17, 2015 8:42pm EDT Lot Description

More information

SFWW Quality Tool Sale

SFWW Quality Tool Sale SFWW Quality Tool Sale SFWW has been commissioned by Dave Coole, a former celebrated senior engineer and toolmaker at the prestigious Royal Aircraft Establishment in Farnborough. David joined the RAE as

More information

HYGIENIC AND BEAUTY IMPLEMENTS FOR HUMANS AND ANIMALS

HYGIENIC AND BEAUTY IMPLEMENTS FOR HUMANS AND ANIMALS Class 8 Hand tools and implements (hand-operated); cutlery; side arms; razors. Explanatory Note Class 8 includes mainly hand-operated implements used as tools in e respective professions. This Class includes,

More information

NOTICE INVITING QUOTATIONS. Description : Equipment for Engineering Workshop in Mechanical Engg. Department. NIQ No : RGUKT-B/Proc/ME/EWS/Q03/2019

NOTICE INVITING QUOTATIONS. Description : Equipment for Engineering Workshop in Mechanical Engg. Department. NIQ No : RGUKT-B/Proc/ME/EWS/Q03/2019 RAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES Basar, Nirmal District Constituted under the Act 18 of 2008 Ref: RGUKT-B/Proc/ME/EWS/Q03/2019, dated.07.02.2019 NOTICE INVITING QUOTATIONS Description

More information

Hand Tool Identification Worksheet. Name: Screw driver. Purpose: To turn the screws. Name: chisels. Purpose: To remove/chip away materials

Hand Tool Identification Worksheet. Name: Screw driver. Purpose: To turn the screws. Name: chisels. Purpose: To remove/chip away materials Hand Tool Identification Worksheet Name: Screw driver Purpose: To turn the screws Safety Facts: Don t use for prying or as a chisel Name: chisels Purpose: To remove/chip away materials Safety Facts: Always

More information

Cabinetmaking & Millwork CIP Task Grid

Cabinetmaking & Millwork CIP Task Grid 1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State

More information

Build Table of Contents. 1. Introduction

Build Table of Contents. 1. Introduction Build Table of Contents 1. Introduction... 1-2 2. A Brief Review of Assembly Systems... 2-2 2.1. Free Assembly Methods... 2-3 2.2. Constrained Assembly Methods... 2-4 3. Our Approach to Building... 3-2

More information

Skills. Pupil Homework Name :- Lesmahagow High School Technical Department. Homework Name the tool shown opposite.

Skills. Pupil Homework Name :- Lesmahagow High School Technical Department. Homework Name the tool shown opposite. Homework 27 1. Name the tool shown opposite. (Page 38) (1) Lesmahagow High School Technical Department 2. Name the tool shown opposite. (Page 39) (1) Practical Woodworking 3. Name the tool shown opposite.

More information

A Page No. 1. Electrode Drying oven thermostatically controlled temperature C

A Page No. 1. Electrode Drying oven thermostatically controlled temperature C A Page No. 1 Package No 1. : Machinery of Welding, Sr. Name of Item Rate to be quoted by tenderer (in rupees) along with specification and make Electrode Drying oven thermostatically controlled temperature

More information

Quality Tool Sale All Welcome 19:15 Thursday 27 September

Quality Tool Sale All Welcome 19:15 Thursday 27 September Quality Tool Sale All Welcome September The Southern Fellowship of Woodworkers is privileged to present this sale of exceptional quality tools, accessories and books to SFWW members, associates and guests.

More information

PRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid

PRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid 1 1 HITACHI 15" MITER SAW H-440041 2 1 OMGA RN 450 RADIAL ARM SAW "NEW MOTOR" 3 1 POWERMATIC MODEL 68 TABLE SAW SR# 84688183 4 1 RITTER LINE BORING MACHINE MODEL R-123 SR#269 3/3/94 5 1 BLUM MINI PRESS

More information

Cabinetmaking & Millwork CIP Task Grid

Cabinetmaking & Millwork CIP Task Grid 1 Secondary Task List 100 FOLLOW RULES FOR WORKING IN THE CABINETMAKING LAB. 101 Review and discuss school rules. 102 Review and demonstrate knowledge of cabinetmaking lab rules. 103 Complete all theory

More information

LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of

LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of LEDBURY SLEROOMS MRKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of SESONED ND GREEN SWN TIMBER, COLLECTBLE WOODWORKING & ENGINEERING TOOLS RESULTS STURDY 7 th JNURY 2017

More information

Trestle Table and Benches Materials List

Trestle Table and Benches Materials List Project 18444EZ: Trestle Table and Benches In the early days of our country, trestle tables were popular because they could easily be disassembled and moved out of the way when not in use no small advantage

More information

Meat Hook. Tools: Materials: Directions: Name: 1/4 round cold rolled steel 20 long 1 wooden dowel 5 long Epoxy Wood Stain Sand Paper Emery Cloth

Meat Hook. Tools: Materials: Directions: Name: 1/4 round cold rolled steel 20 long 1 wooden dowel 5 long Epoxy Wood Stain Sand Paper Emery Cloth Meat Hook Name: Description: This project allows students to use hot and cold metal working skills and wood working skills to construct a meat hook. Hot metal working skills are also useful for making

More information

ITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL

ITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL CHAPTER 82 NOTES: TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure of pedicure

More information

Total Test Questions: 74 Levels: Grades Units of Credit:.50

Total Test Questions: 74 Levels: Grades Units of Credit:.50 DESCRIPTION The third in a sequence of assessments, Cabinetmaking prepares students to apply technical knowledge and skills to set up and operate industrial woodworking machinery and to use such machinery

More information

FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams

FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams Copyright 2009 Dekalam Hire Learning Incorporated TOOLS Hammers Hammers are instruments used for pounding. For the most part they serve

More information

Total Test Questions: 74 Levels: Grades Units of Credit:.50. Identify career opportunities in the furniture and cabinetmaking industries.

Total Test Questions: 74 Levels: Grades Units of Credit:.50. Identify career opportunities in the furniture and cabinetmaking industries. DESCRIPTION Furniture Design and Manufacturing (522) is the second instructional course in a sequence that prepares students to apply technical knowledge and skills to prepare and execute furniture design

More information

Tool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score.

Tool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score. Tool ID Purpose: To develop the student s ability to correctly identify the names and uses of a variety of tools commonly used in the agricultural industry. Team Score Format: A team shall be comprised

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

More information

Building Bigger Things. Woodworking Tools and Machinery. Marking Gauge. Thumb Screw. Stop Screw. Shoe. Beam. Pin. Head. Face Plate

Building Bigger Things. Woodworking Tools and Machinery. Marking Gauge. Thumb Screw. Stop Screw. Shoe. Beam. Pin. Head. Face Plate Woodworking Tools and Machinery Pin Shoe Face Plate Thumb Screw Head Stop Screw Beam Marking Gauge A marking gauge is used to mark a uniform width on a board. The steel combination square discussed in

More information

192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme

192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme 192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme This is a trade related course The examination will comprise two papers. 192-1 Paper I: Section A. This paper comprises two sections: (A and B)

More information

Performance Rating Scale: Limited Skills... Moderate Skills..High Skills

Performance Rating Scale: Limited Skills... Moderate Skills..High Skills PERFORMANCE STANDARD EVALUATION CHECKLIST Student Name Instructor s Name School District Performance Rating Scale: 1 2 3 4 5 6 7 8 9 10 Limited Skills..... Moderate Skills..High Skills Performance assessments

More information

The Absolute Essential Tools Every Do-It-Yourselfer Must Own

The Absolute Essential Tools Every Do-It-Yourselfer Must Own The Absolute Essential Tools Every Do-It-Yourselfer Must Own Answers To Get Your DIY Project Back On Track. DIYAnswerGuy.com One of the biggest problems do-it-yourselfers encounter is either not having

More information

Item No. Category Maker Type Size Quantity Description Price Notes

Item No. Category Maker Type Size Quantity Description Price Notes Item No. Category Maker Type Size Quantity Description Price Notes A1 Tool chest Carpenter's 5 board 28" x 36"x 23" dovetailed w/6 sliding tills A2 Marking gages + craftsman made Panel gage A3 Cutter +

More information

1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1

1 1 John Deere DI55 48 Cut, 54 hrs 2 1 John Deere L MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L100 3 1 MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 STANDS 8 1 HYDRAULIC JACK 9 1 TROLLEY HYDRAULIC JACK

More information

Build a Stout Workbench

Build a Stout Workbench Build a Stout Workbench Tail vise is at the heart of this versatile bench by chris gochnour I ve done a fair amount of handplaning during my 32 years as a professional furniture maker, and I ve found that

More information

equipment, HB, many pages

equipment, HB, many pages Ohio, Jackson, Tyler, Winchester, Sargent, Catalogs New Brittain Plane Bailey No. 6 Gages, box Stanley, Disston No. 76, No. 7, No. 6 Planes Unmarked - / Push drill Unmarked 6 Keys Iron 7 Scraper Stanley

More information

TOOLS & TECHNIQUES: SHARPENING

TOOLS & TECHNIQUES: SHARPENING SHARPENING A Really Sharp Edge... 2 Obtaining a Keen Edge... 4 How I Sharpen my Tools... 6 Hollow-ground Cutting Edges... 8 Sharpening Your Tools: Can You Produce a Keen Edge?... 10 When Your Plane Needs

More information

Prof. Steven S. Saliterman Introductory Medical Device Prototyping

Prof. Steven S. Saliterman Introductory Medical Device Prototyping Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ You must complete safety instruction before using tools and equipment in

More information

3 Lot of 4 2f2f Rules, 1 is Richardson & Co. Middletown, 1 is Hubbard Hardware Co. Middletown

3 Lot of 4 2f2f Rules, 1 is Richardson & Co. Middletown, 1 is Hubbard Hardware Co. Middletown 1 Broad Axe by Wm. Beatty & Son 12 1/2 2 Lot of 2 Large Crosscut Saws 3 Lot of 4 2f2f Rules, 1 is Richardson & Co. Middletown, 1 is Hubbard Hardware Co. Middletown 4 Broad Axe by Simmons, Cohoes, N.Y.

More information

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM SHOW COUPONS Cuttin Prices ALL WEEKEND LONG! ON THE BRAND NAMES KNOW AND TRUST! Where: Florida State Fair Entertainment Hall 4800 US Hwy 301 North Tampa, FL 33610 When: Fri. 12pm to 6pm Sat. 10am to 6pm

More information

DOCUMENT CHEST. Curly Maple, White Pine

DOCUMENT CHEST. Curly Maple, White Pine 25 DOCUMENT CHEST Curly Maple, White Pine 100 MAKING THE DOCUMENT CHEST After the stock has been thicknessed, ripped to width, and cut to length, plough a 1/4" X 3 /8" groove on the inside faces of the

More information

POS Perkins Statewide Articulation Agreement Documentation Coversheet

POS Perkins Statewide Articulation Agreement Documentation Coversheet POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL

More information

Windsor Chair Online. Assembly Instructions

Windsor Chair Online. Assembly Instructions Windsor Chair Online Assembly Instructions Date: 1/4/2007 Other Chairs Offered Philadelphia Arm Chair New England Comb Back Sackback d Arm Chair Bow Back Side Chair Fan Back Side Chair Page 1 Table of

More information

Fri. Feb. 1 PM

Fri. Feb. 1 PM Thur. Feb. 18th @ 10 AM Uncataloged Antiques Selling will begin on Thursday, February 18th at 10 A.M. with a two-hour uncataloged session. A partial listing includes: Agriculture Related Items: (2) F.E.

More information

When: Fri. 12 PM - 6 PM Sat. 10 AM - 6 PM Sun.10 AM - 3 PM

When: Fri. 12 PM - 6 PM Sat. 10 AM - 6 PM Sun.10 AM - 3 PM SAVE INK! PRINT IN BLACK & WHITE Where: Meadowlands Expo Center 355 Plaza Drive Secaucus, NJ 07094 When: Fri. 12 PM - 6 PM Sat. 10 AM - 6 PM Sun.10 AM - 3 PM March 2nd - 4th Admission Discount Bring Your

More information

Price list- catalogue goods

Price list- catalogue goods Hammers Hammer- machinist Machinist hammer 28/100 g 8590343002004 5,56 Machinist hammer 28/200 g 8590343002028 5,96 Machinist hammer 28/300 g 8590343002042 6,36 Machinist hammer 28/400 g 8590343002059

More information

Estate Lot V-xx List for 2016 Annual Meeting Auction

Estate Lot V-xx List for 2016 Annual Meeting Auction V001 V002 Estate Lot V-xx List for 2016 Annual Meeting Auction Description of s in V-xx Estate Lot STANLEY BEDROCK 604C. Sweetheart logo on blade. Japanning 100%. Stanley decal on handle ~60%. No chips/cracks.

More information

Auction ESTATE. Saturday, May 19 10:00 AM. Owner: Harvey Fettig Estate & Carole Fettig Location: th Ave SW, Steele, ND TOOLS & SHOP

Auction ESTATE. Saturday, May 19 10:00 AM. Owner: Harvey Fettig Estate & Carole Fettig Location: th Ave SW, Steele, ND TOOLS & SHOP ESTATE Auction Saturday, May 19 th @ 10:00 AM (Alternate date in case of weather cancellation is May 20 th @ 12:00 Noon) Owner: Harvey Fettig Estate & Carole Fettig Location: 402 4 th Ave SW, Steele, ND

More information

Calderside Academy. Technical Department. Standard Grade Craft & Design. Knowledge & Understanding In Wood. Page

Calderside Academy. Technical Department. Standard Grade Craft & Design. Knowledge & Understanding In Wood. Page Calderside Academy Technical Department Standard Grade Craft & Design Knowledge & Understanding In Wood Page Knowledge and understanding of Wood Throughout the world there are thousands of different species

More information

Strands & Standards FURNITURE DESIGN & MANUFACTURING

Strands & Standards FURNITURE DESIGN & MANUFACTURING Strands & Standards FURNITURE DESIGN & MANUFACTURING COURSE DESCRIPTION The second instructional course in a sequence that prepares individuals to apply technical knowledge and skills to prepare and execute

More information

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM SHOW COUPONS Cuttin Prices ALL WEEKEND LONG! ON THE BRAND NAMES KNOW AND TRUST! Where: Gateway Center, Ballroom ABCD One Gateway Drive Collinsville, IL 62234 When: Fri. 12pm to 6pm Sat. 10am to 6pm Sun.

More information

Furniture Design & Manufacturing

Furniture Design & Manufacturing PRECISION EXAMS Furniture Design & Manufacturing EXAM INFORMATION Items 70 Points 73 Prerequisites WOODWORKING Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION The second instructional course in

More information

ESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY

ESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY ESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY One of the biggest difficulties in teaching ESL students practical skills is the lack of exposure to related technology and

More information

Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm

Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm 001 DeLonghi Radia 1500W heater 002 Bench grinder, Clarke 6", CBG6RP 003 Reciprocating saw, Workzone 710W, 004

More information

Alaska Bird Observatory Shelves Christopher Swingley

Alaska Bird Observatory Shelves Christopher Swingley Introduction Alaska ird Observatory Shelves Christopher Swingley These are the bookshelves I built for the Alaska ird Observatory s new building at Wedgewood Resort in Fairbanks. My version was built from

More information

DVD Cabinet. rabbeting with a moving filletster plane At this point, the insides of the case, and the shelves 5-JAN-2005

DVD Cabinet. rabbeting with a moving filletster plane At this point, the insides of the case, and the shelves 5-JAN-2005 INTRODUCTION DVD Cabinet CHRISTOPHER SWINGLEY 5-JAN-2005 These plans are derived from Michael Dunbar s Colonial Cupboard hand tool project in Fine Woodworking, Number 151, October 2001, pages 64-71. The

More information

Tool Rest SVD-110 (60483) Positioning of Machine

Tool Rest SVD-110 (60483) Positioning of Machine Tool Rest SVD-110 (60483) TURNING SCRAPERS Round nose Square end Curved CARVING SCORPS AND INSHAVES CABINET SCRAPERS HOLLOWING TOOLS SCREW DRIVERS Positioning of Machine Grinding direction: away from or

More information

Shuttering Carpenter

Shuttering Carpenter Lab Specifications Shuttering Carpenter An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the development

More information

'.,,_ --c_,_.,,. :.~'i.;,j,{.-, '...

'.,,_ --c_,_.,,. :.~'i.;,j,{.-, '... ... ~ ~ - i ~ I b '.,,_ --c_,_.,,. :.~'i.;,j,{.-, '... .; STANLEY No. 50 ~ombination Plane " ("T!HIS STANLEY No. 50 CoMBINATION \..:) PLANE is light in weight, easy to handle and exceedingly inexpensive

More information

The 7 th Annual Hotter Than Hell Antique Tool Auction

The 7 th Annual Hotter Than Hell Antique Tool Auction GPTC Presents The 7 th Annual Hotter Than Hell Antique Tool Auction July 30, 2016, 9:30 AM Harvester Lions Club 4835 Central School Road St. Charles (St. Louis), MO 63304 1 2 3 4 5 6 7 8 Stanley #8 Type

More information

Lie-Nielsen Toolworks. Heirloom Quality Tools

Lie-Nielsen Toolworks. Heirloom Quality Tools Lie-Nielsen Toolworks Heirloom Quality Tools 2015-16 made in maine, usa, since 1981 Dear Woodworker, Welcome to Lie-Nielsen Toolworks! Heirloom Quality Tools We are a small, family company located in Midcoast

More information

14 Plane Gage No. 7C 1 Heavy duty universal or "pump jig" Bushing Co. bearing/bushing press 16 Books 6 Woodworking 17 Wrenches 10

14 Plane Gage No. 7C 1 Heavy duty universal or pump jig Bushing Co. bearing/bushing press 16 Books 6 Woodworking 17 Wrenches 10 Auction Category Maker Type Size Quantity Description No. 1 Planes 4 Levels Stanley No. 36 6, 18 3 Rule, bevel No. 4 1 4 Drill A.A. Wood & 1/4"-1 1/4" 1 Tenon cutter for bit-brace Sons 5 Drill Millers

More information

AN ASSESSMENT OF THE AVAILABILITY OF WOODWORK PROGRAMME AND MATERIALS IN FEDERAL SCIENCE TECHNICAL COLLEGE IN BAYELSA STATE

AN ASSESSMENT OF THE AVAILABILITY OF WOODWORK PROGRAMME AND MATERIALS IN FEDERAL SCIENCE TECHNICAL COLLEGE IN BAYELSA STATE AN ASSESSMENT OF THE AVAILABILITY OF WOODWORK PROGRAMME AND MATERIALS IN FEDERAL SCIENCE TECHNICAL COLLEGE IN BAYELSA STATE Oruabena Bernard, Ugochukwu Okiridu Micheal & George Deinbofa Department of Civil

More information

Catalogue of Auction Items - Greenville Woodworkers Guild

Catalogue of Auction Items - Greenville Woodworkers Guild Catalogue of Auction Items - Greenville Woodworkers Guild Come and join us - Auction and Sale on Saturday October 27, 2018 - All are welcome. Doors open at 8:30 a.m. Auction bidding closes at 10:30 a.m.

More information

Butterfly Leaf Dining Table Plans

Butterfly Leaf Dining Table Plans Butterfly Leaf Dining Table Plans Part 1 An attractive dining table with a secret: the leaf folds and stores inside the table. Season 1, Episode 7 P a g e 2 I first saw a butterfly leaf table in a back

More information

AUCTION 12:30 PM

AUCTION 12:30 PM AUCTION Sunday, May 22 @ 12:30 PM Owners: Troy & Lisa Portra Location: Gateway Mall (former Hansen s Mens Wear location use theater or mall entrance), 2700 State Street, Bismarck, ND This sale features

More information

240 MACHINE WOODWORKING

240 MACHINE WOODWORKING 240 MACHINE WOODWORKING Examination Structure For this trade, the following are the trade related courses: 193 Engineering drawing (CTD 11-13) 194 Basic Electricity (CE 1 11) The trade will also be examined

More information

RECREATING. A 17th CENTURY CARVED BOX TEXT AND PHOTOS: PETER FOLLANSBEE

RECREATING. A 17th CENTURY CARVED BOX TEXT AND PHOTOS: PETER FOLLANSBEE RECREATING A 17th CENTURY CARVED BOX TEXT AND PHOTOS: PETER FOLLANSBEE Most 17th-century households in England and New England contained one or more small boxes for storing a variety of everyday objects.

More information

BUILDING A STORM DOOR

BUILDING A STORM DOOR BUILDING A STORM DOOR BY NEAL BARRETT Illustrations by George Retseck If you're in the market for a storm door, you probably know that there are many styles and models available. However, most of them

More information

Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary

Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Wednesday, August 20, 2014, 1:32PM Unit Course Standards and Objectives

More information

perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9

perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9 perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9 CASE TOOLS PE 9 BRACELET TOOLS PE 13 VICES PE 14 CASE HOLDERS

More information

N5 Design & Manufacture. Woodworking Questions. Montrose Academy

N5 Design & Manufacture. Woodworking Questions. Montrose Academy N5 Design & Manufacture Woodworking Questions Montrose Academy Montrose Academy Technical Department Page 24 Match the correct name with the correct plane. The first one has been done for you as an example

More information

CARPENTRY. Carpentry tools: The following are the tools that are made use of in all the wood working operations.

CARPENTRY. Carpentry tools: The following are the tools that are made use of in all the wood working operations. CARPENTRY INTRODUCTION: Carpentry may be defined as the process of making wooden components. It starts from a marketable form of wood and ends with a finished product. It Deals with the building work,

More information

Dovetail Saw Guides. Figure 1: Dovetail saw guide, exploded view. Guide Block. UHMW Friction Pad. Sliding Clamp. Rare-Earth Magnet

Dovetail Saw Guides. Figure 1: Dovetail saw guide, exploded view. Guide Block. UHMW Friction Pad. Sliding Clamp. Rare-Earth Magnet Dovetail Saw Guides U.S. Pat. No. 6,607,016 Dovetail joints have traditionally been the hallmark of a cabinetmaker who had acquired an expert level of skill. They are also a mark of quality and attention

More information

Diefenbacher. Tools. Fine Hand Tools for Woodworkers

Diefenbacher. Tools.  Fine Hand Tools for Woodworkers Diefenbacher Fine Hand Tools for Woodworkers Tools www.diefenbacher.com Catalog 2009 Diefenbacher Tools 12132 Old Big Bend St. Louis, MO 63122 USA Order Form Name: Shipping Address: City: State: Zip: E-mail

More information

Wood Science Judging

Wood Science Judging 2017-2018 Wood Science Judging Decision making skills and the ability to clearly express one's self are great attributes in many careers today. The 4-H judging teaching technique can help members develop

More information

Project 17884EZ: Shaker End Table

Project 17884EZ: Shaker End Table Project 17884EZ: Shaker End Table With its clean, simple lines, this piece is unmistakably Shaker style. Ours is made from cherry, a wood commonly used by Shaker craftsman, but we ve also seen this piece

More information

MODULE INTRODUCTION TO HAND TOOLS. (00103 LESSON 2 of 2) SLIDE PRESENTATION

MODULE INTRODUCTION TO HAND TOOLS. (00103 LESSON 2 of 2) SLIDE PRESENTATION MODULE 00103-09 INTRODUCTION TO HAND TOOLS (00103 LESSON 2 of 2) SLIDE PRESENTATION SLIDE 33A 12.0.0 SQUARES Squares are used for marking, checking, and measuring. The common squares are the carpenter

More information

Ball-Joint Scrapers Steel Blade Carbide Blade 05K K21.04

Ball-Joint Scrapers Steel Blade Carbide Blade 05K K21.04 Ball-Joint Scrapers Steel Blade Carbide Blade 05K21.01 05K21.04 The Veritas Ball-Joint Scraper is based on a tool originally made by L.S. Starrett Tool Company but out of production for many years. Originally

More information

Written by Frank Garcia Ver. 2

Written by Frank Garcia Ver. 2 Written by Frank Garcia frankg670@gmail.com 3-18-2017 Ver. 2 Preparing Copper Or Brass inlay wire. The Copper or Brass wire which is used with this inlay technique is flat. The wire can be purchased from

More information

Replicate/restore wooden components of furniture

Replicate/restore wooden components of furniture Replicate/restore wooden components of furniture Overview This standard addresses the competence required to make wooden components for hand-crafted furniture. This involves: 1 cutting, shaping and moulding

More information

Item ID Item Type Name

Item ID Item Type Name Item ID Item Type Name Amount / Fee Manufacturer 1 Power Drills Power Drill (corded) 3 Makita 2 Power Drill 3/8in Power Drill (corded) 3 Black & Decker 3 Power Drills Power Drill (corded) 3 DeWalt 4 Cordless

More information

3. Match tools used in handtool woodworking to their correct definition. 4. Read a rule. '"-,,, 5. Select From a list, cor'rect ways to use a handsaw.

3. Match tools used in handtool woodworking to their correct definition. 4. Read a rule. '-,,, 5. Select From a list, cor'rect ways to use a handsaw. - Ag Mech 6-1 BASIC SKILLS IN HANDTDDL WOODWORKING For EXPLORATORY VOCATIONAL AGRICULTURE in ARKANSAS UNIT DB.JECTIVE AFter completion of this unit, the student should be able to identify and properly

More information

ARTS AND CRAFTS CHAIR

ARTS AND CRAFTS CHAIR ARTS AND CRAFTS CHAIR 491 MATERIALS LIST--DINING CHAIR Key No. Size and description (use) A 2 1-3/4 x 1-3/4 x 16-1/4'' oak (front leg) B 2 1-3/4 x 3-3/4 x 40-1/2'' oak (rear leg) C 1 1-3/4 x 3-3/16 x 15''

More information

Crafter. Hinge INCRA. Any Hinge, Any Size, Any Project! OWNER S MANUAL SAFETY. Please read this owner s manual and keep it at hand for reference.

Crafter. Hinge INCRA. Any Hinge, Any Size, Any Project! OWNER S MANUAL SAFETY. Please read this owner s manual and keep it at hand for reference. INCRA Hinge Crafter OWNER S MANUAL Any Hinge, Any Size, Any Project! SAFETY Important safety instructions for using the INCRA HingeCrafter Please read this owner s manual and keep it at hand for reference.

More information

1774 Scotch Line Rd. Minden, ON K0M 2K

1774 Scotch Line Rd. Minden, ON K0M 2K 1774 Scotch Line Rd. Minden, ON K0M 2K0 705-286-0464 www.unimat-1.com UNIMAT & ACCESSORIES PRICE LIST APRIL 2016 Art.No Description USD 160 100 Unimat 1 Basic $299.00 160 141 Unimat Classic $529.00 160

More information

Corner Cupboard. This space-saving piece enhances any room 46 FINE WOODWORKING

Corner Cupboard. This space-saving piece enhances any room 46 FINE WOODWORKING Corner Cupboard This space-saving piece enhances any room BY G A R R E T T H A C K On every trip to the Shelburne Museum near Burlington, Vt., I visit a favorite object a small hanging corner cabinet.

More information

Hans Brunner Tool Auctions April 6, 2013

Hans Brunner Tool Auctions April 6, 2013 Hans Brunner Tool Auctions April 6, 2013 PO Box 5238, Brassall Qld 4305 www.hansbrunnertools.gil.com.au 0421 234 645 Vol 24 featuring the collection of Dave Mills, Old Time Builder 1 1 Complete half set

More information

1 Unusual Large Signed Axe $ Lot of 3 Stanley Block Planes $ Boxlot of Tools Stanley, 2 Drawknives, Box Scraper, etc. $50.

1 Unusual Large Signed Axe $ Lot of 3 Stanley Block Planes $ Boxlot of Tools Stanley, 2 Drawknives, Box Scraper, etc. $50. 1 Unusual Large Signed Axe $80.00 2 Lot of 3 Stanley Block Planes $20.00 3 Boxlot of Tools Stanley, 2 Drawknives, Box Scraper, etc. $50.00 4 Large Jointer & a Rounding Plane $30.00 5 Lot of 2 Bench Planes,

More information

Knockdown Bookcase. This slant-sided bookcase was a popular mail-order item in the early 1900s.

Knockdown Bookcase. This slant-sided bookcase was a popular mail-order item in the early 1900s. Knockdown Bookcase This slant-sided bookcase was a popular mail-order item in the early 1900s. The Arts & Crafts movement was part of an interesting social change in America the advent of mail-order purchases.

More information

Pivot-Door Downdraft Cabinet Plans

Pivot-Door Downdraft Cabinet Plans Pivot-Door Downdraft Cabinet Plans Finished Cabinet Closed Open Exploded View Introduction This simple downdraft-style dust collection cabinet is a great way to keep your shop cleaner and keep your router

More information

The WoodWorker s Edge

The WoodWorker s Edge The WoodWorker s Edge Draw-leaf Game Table 1. 2. Layout the area for the tenons. The tenons are 3/8 thick x 4-1/2 long x 1-1/4 deep and offset to the inside. Create the tenons using the step method to

More information

level 5 (6 SCQF credit points)

level 5 (6 SCQF credit points) Practical Woodworking: Flat-frame Construction SCQF: level 5 (6 SCQF credit points) Unit code: H25V 75 Unit outline The general aim of this Unit is for learners to develop practical skills in the use of

More information