Insert Tooling & Inserts

Size: px

Start display at page:

Download "Insert Tooling & Inserts"

Cornelia McDowell
5 years ago
Views:

1 Insert Tooling & Inserts

Customer Focused & Technology Driven With a base of solid experience, the latest in technological advancements and a focus on the needs of the customer, NAP Gladu surpasses its goal of providing more

2 Customer Focused & Technology Driven With a base of solid experience, the latest in technological advancements and a focus on the needs of the customer, NAP Gladu surpasses its goal of providing more than just a cutting tool. We are your application engineers, engineering department, problem solvers and partners in the drive to success. Technology: The Competitive Edge Interactive design...application engineering...problem solving: NAP Gladu dramatically expands your capabilities. With one of the most sophisticated engineering departments in the industry, NAP Gladu is able to provide solutions to your most challenging tooling needs. Our network of computer-controlled systems is capable of direct electronic feeds from off-site locations... including yours. This enables us to measure tool patterns with precision for exact pattern duplication every time. When it comes to designing and manufacturing tooling for your specific application, NAP Gladu uses its experience, knowledge and technical expertise to ensure that you get tooling that meets or exceeds your expectations -- guaranteed. Service: Speed & Precision NAP Gladu offers unmatched reliability in the delivery of new and serviced tools. Customers depend on us for fast turnaround times. What's more, they can count on NAP Gladu to do the job right the first time, every time. Contact your local NAP GLADU representative for more information or to request a quotation.

3 Table of Contents Next G Description How To Use Next G Cost Comparison Frequently Asked Questions NEXT G PLUS Comparison and Technical Drawings DEDICATED & UNIVERSAL INSERT HEADS Dedicated Face Mounted Inserts Additional Items and Special Features Dedicated Insert Heads Universal Insert Heads Insert Router Bits Service Items and Cleaning Kit Vanish SF Series (Sand Free Tooling) Stabilizer Replacement Parts Cleaning Procedure for Insert Cutting Tools STANDARD & PROFILED CARBIDE Ordering Instructions Standard Turnover Carbide Knives For Spurs and Groovers Specialty Carbide Inserts Insert Profile Zone Flat Bottom Carbide Inserts Non-Turnable - No Holes Non-Turnable - 1 Hole Non-Turnable - Holes Flat Bottom Specialty Carbide Inserts Non-Turnable - Holes Beveled Bottom Carbide Inserts Non-Turnable - 1 Hole Non-Turnable - Holes Beveled Top & Bottom Carbide Inserts Non-Turnable - Holes Turnable - Holes Specials & Leuco Carbide Inserts Special Carbide Inserts, Non-Turnable Jonalloy Flat Bottom Inserts Non-Turnable - No Holes Non-Turnable - 1 Hole Non-Turnable - Holes Jonalloy Beveled Bottom Inserts Non-Turnable - 1 Hole Non-Turnable - Holes Turnable - Holes Face Mount Inserts for Cutterheads Backing Plates for Leuco Heads Serrated Backing Plates Index locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 3

The Next G Series are the first tools capable of automatically positioning diamond and/or carbide profiled inserts while keeping accurate and constant axial and diameter positions.

This system eliminates the inherent positioning error of standard profiled inserts that are secured by just screws against one surface of the tool body, or by wedge gibs.

This system eliminates the time of trial and error checking of the knife position.

Rear Clamping System with Single Screw Fastening Secure clamping pressure is from the large diameter single screw located at the rear of the knife assembly.

4 The Next G Series are the first tools capable of automatically positioning diamond and/or carbide profiled inserts while keeping accurate and constant axial and diameter positions. Accurate Self Positioning System Each profiled insert is positioned with a three contact point locating system on the tool body. This system eliminates the inherent positioning error of standard profiled inserts that are secured by just screws against one surface of the tool body, or by wedge gibs. The spring loaded system positions the insert knives within a repeatability of (3/10 of 1 thousandth of an inch). This system eliminates the time of trial and error checking of the knife position. It delivers more consistent production results due to the repeated exact positioning of the profile on all knives in the tool. Product quality is increased, scrap rejects are decreased. Rear Clamping System with Single Screw Fastening Secure clamping pressure is from the large diameter single screw located at the rear of the knife assembly. Positive interlocking of the knife and the clamping back plate with the solid tool body provides extremely high security even if the screw is loose. Diamond or Carbide Inserts in the same Tool Body Choose to mount either Diamond or Carbide inserts in the same tool body to optimize the cutting edge for different material applications (hardwood, softwood, mdf, particle board, solid acrylics, cement board). This dual system also allows a new profile to be prototyped and tested with lower cost carbide cutting edges. Once the new design is approved, continuous production can then be started using the same tool body with diamond inserts. Change Profiles as needed Use one Next G series tool body for different profiles. One common body style standardizes tooling set ups in the tool room and out at the machine. Users can reduce their inventory of dedicated tools that may only be used occasionally. Faster delivery of new profiles and full utilization of a standard tool body can compliment today s LEAN manufacturing systems. 4 Contact your local NAP GLADU representative for more information or to request a quotation.

5 STANDARD NEXT G BODIES Next G Only - NOT Next G Plus (use Pdiam) Number of Seats Body O mm 90mm 100mm 110mm 10mm 135mm 145mm 160mm 180mm 196mm Discount on Bodies with multiple quantities: Volume discounts available for, 3, 4 and more. *Available if Bodies are exact Diameter, Number of seats, Hole, Hook & Shear angles. CW & CCW can be quoted together. Surcharge on Bodies for custom specification Surcharge is added if Non-Standard Body O, RPM Range or Max. Weight is Required. NEXT G BACK-CLAMPS Qty. 30mm 40mm 50mm CW & CCW must be quoted separately. NEXT G CARBIDE KNIVES Qty. 30mm 40mm 50mm STANDARD NEXT G SPECIFICATIONS TABLE Max. Weight (kg) RPM Range Body Thickness Body O Small Cutting O Nmin Nmax 30mm 40mm 50mm 75mm 3.15 or 80mm mm 3.75 or 95mm mm 4.15 or 105mm mm 4.5 or 115mm mm 5 or 15mm mm 5.5 or 140mm mm 6 or 150mm mm 6.5 or 165mm mm 7.5 or 185mm mm 8 or 00mm locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 5

6 5mm 6mm 7mm 8mm 9mm 10mm 11mm 1mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 0mm 1mm mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 30mm 31mm 3mm 33mm 34mm 35mm 36mm 37mm 38mm 39mm 40mm 41mm 4mm 43mm 44mm 45mm 46mm 47mm 48mm 49mm 50mm Diamond Insert Knives Cutting Length of Wood Profile Recommended Quantities in Order Nbr of Knives in Order Contact your local NAP GLADU representative for more information or to request a quotation.

7 51mm 5mm 53mm 54mm 55mm 56mm 57mm 58mm 59mm 60mm 61mm 6mm 63mm 64mm 65mm 66mm 67mm 68mm 69mm 70mm 71mm 7mm 73mm 74mm 75mm 76mm 77mm 78mm 79mm 80mm 81mm 8mm 83mm 84mm 85mm 86mm 87mm 88mm 89mm 90mm 91mm 9mm 93mm 94mm 95mm 96mm Diamond Insert Knives Cutting Lenght of Wood Profile Recommended Quantities in Order Nbr of Knives in Order locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 7

8 5mm 6mm 7mm 8mm 9mm 10mm 11mm 1mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 0mm 1mm mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 30mm 31mm 3mm 33mm 34mm 35mm 36mm 37mm 38mm 39mm 40mm 41mm 4mm 43mm 44mm 45mm 46mm 47mm 48mm 49mm 50mm Diamond Insert Knives - Sharpening Cutting Lenght of Wood Profile Nbr of Knives in Service Contact your local NAP GLADU representative for more information or to request a quotation.

9 51mm 5mm 53mm 54mm 55mm 56mm 57mm 58mm 59mm 60mm 61mm 6mm 63mm 64mm 65mm 66mm 67mm 68mm 69mm 70mm 71mm 7mm 73mm 74mm 75mm 76mm 77mm 78mm 79mm 80mm 81mm 8mm 83mm 84mm 85mm 86mm 87mm 88mm 89mm 90mm 91mm 9mm 93mm 94mm 95mm 96mm Diamond Insert Knives - Sharpening Cutting Lenght of Wood Profile Nbr of Knives in Service locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 9

How to remove a knife from the clamping system Unscrew the rear Back-Clamp 3 or 4

With one hand, hold the side edges of the knife then push it down to unlock it.

Move the knife against the Back- Clamp surface and slide it outward in order to

While removing the screw, hold the Back-clamp with the other hand to prevent it

You can remove the Back- Clamp by sliding it out of the side of the head.

Wear eye protection when using compressed air.

Make sure that the Sf value of the Back-Clamp is lower than the Sfmax value of

10 How to remove a knife from the clamping system Unscrew the rear Back-Clamp 3 or 4 full turns. No need to hold the knife while doing this. With one hand, hold the side edges of the knife then push it down to unlock it. You will feel the spring loaded system. Move the knife against the Back- Clamp surface and slide it outward in order to remove the knife from the system. How To Use Next G Insert Heads How to change a Profile Back-Clamp After removing the knife, you can completely remove the screw. While removing the screw, hold the Back-clamp with the other hand to prevent it falling out. You can remove the Back- Clamp by sliding it out of the side of the head. Carefully clean the head s seat with an air gun to remove any wood dust. Wear eye protection when using compressed air. Insert a clean Back-Clamp by sliding it into the side of the head. Make sure that the Sf value of the Back-Clamp is lower than the Sfmax value of the Head and that the hook angle of the Back-Clamp matches the hook angle of the head. Carefully place the knife in a secure area to prevent damage to the diamond edge. Insert the screw and tighten completely without any knife installed. Then unscrew 3 turns to open the back-clamp. 10 Contact your local NAP GLADU representative for more information or to request a quotation.

How to insert a knife into the head How To Use Next G Insert Heads How to run the Next G

surface till you feel the spring load system.

Push the knife to compress the springs and move it forward against the head s seat surface

Make sure that the knife surface is completely seated on the head surface.

You can easily reach this torque requirement with the prvided screwdriver.

11 How to insert a knife into the head How To Use Next G Insert Heads How to run the Next G cutter With one hand, hold the side edges of the knife and slide it along the Back-Clamp surface till you feel the spring load system. Check that the machine RPM is within the RPM range printed on the tool s body. Push the knife to compress the springs and move it forward against the head s seat surface in order to lock it. Make sure that the knife surface is completely seated on the head surface. Screw the rear Back-Clamp. Don t hold the knife, it is selfpositioned. Install the tool on the machine. You don t have to worry about the radial adjustment as your knives are sharpened to a constant small diameter. With the same tool body you can change from a carbide insert to a diamond insert using the same back clamp. To change to a new profile you must also change to a new back clamp. Firmly hand tighten the screw to a min. torque of 16 N.m (11.5 lb. ft.). You can easily reach this torque requirement with the prvided screwdriver. Each Back-Clamp can be used in any Next G Body of the same width (30, 40 or 50mm...) and with a matching hook angle. Check the hook angle etched on the back clamp and the body. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 11

How to service a damaged or worn diamond insert Remove the diamond insert from the head and replace

Check if the center round hole of the diamond insert is filled with a copper plug.

How To Use Next G Insert Heads Send us the diamond inserts for servicing.

12 How to service a damaged or worn diamond insert Remove the diamond insert from the head and replace it with another diamond insert. DO NOT mix diamond and carbide inserts on the same head. Check if the center round hole of the diamond insert is filled with a copper plug. If not, you can still service the insert. (NB: Some wider inserts may have more than 1 center hole). How To Use Next G Insert Heads Send us the diamond inserts for servicing. We will reprofile your inserts to the original constant diameter and rebalance it to it s initial weight. When receiving your reprofiled inserts, carefully stock it with the other inserts of the same number. You can mix new and reprofiled diamond inserts on the same head. 1 Contact your local NAP GLADU representative for more information or to request a quotation.

Cost Benefits Comparison Cost comparison of Next G Series to conventional Diamond or Insert Tools Using the following specifications as a case study, you can see how the savings will add up with Next

This flexible design means that users can reduce their inventory of dedicated tools.

13 Cost Benefits Comparison Cost comparison of Next G Series to conventional Diamond or Insert Tools Using the following specifications as a case study, you can see how the savings will add up with Next G. NEXT G TOOL SPECIFICATIONS NEXT G TOOL PRICING Number of Heads 1 Next G Body $750 Small Cutting Diameter 5 in. Back-Clamp $95 Number of Wings 3 Diamond Knife $9 Width of Head 30 mm Diamond Knife Resharpening $96 Wood Profile Length 31.3 mm 1) Change profiles as needed Use one Next G tool body for different profiles. Easily change profiles using one common body style. This flexible design means that users can reduce their inventory of dedicated tools. Conventional Next G Dedicated Carbide Next G Diamond Head Diamond Savings Insert Head Carbide Savings 1 profile $1,65 $1,71-36% $744 $1,117-50% profiles $,59 $,69-6% Starting with the $1,488 $1,484 0% 3 profiles $3,794 $3,664 3% nd profile you pay $,3 $1,851 17% 4 profiles $5,058 $4,635 8% only for the back-clamps $,976 $,18 5% 6 profiles $7,588 $6,577 13% & diamond knives $4,464 $,95 34% 8 profiles $10,117 $8,519 16% $5,95 $3,686 38% 10 profiles $1,646 $10,46 17% $7,439 $4,41 41% ) Sharpen or replace a single diamond insert as required Another big advantage of the Next G Series is that if one tooth is accidentally chipped or damaged, only that knife needs to be serviced. Replace the damaged knife with a spare knife and send the damaged knife for service. With a conventional diamond tool the complete tool must be sent for service. Conventional Diamond Backup Head Next G Backup Diamond Knives Savings with 1 backup head per profile $1,65 $686 46% with backup heads per profile $,59 $1,37 46% 3) Reduce sharpening costs Sharpening costs of Next G diamond knives are less than a comparable conventional diamond cutterhead. The Next G self positioning system provides constant diameter and profile positioning after service. That means that no fence or spindle adjustments on the machine are required after installing new or re-sharpened inserts in the Next G tool body. Back up tooling to use during service is just another set of diamond or carbide knives instead of a complete conventional diamond cutterhead. Shipping expenses are also reduced since only a small package of knives is being transported instead of a heavy box with a complete tool. Conventional Diamond Head Next G Diamond Savings Sharpening + shipping* $439 *Shipping cost estimated to $85 with Constant Diameter + shipping* $318 8% *Shipping cost estimated to $30 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 13

14 Cost Benefits Comparison 4) Easily change from carbide to diamond The dual system allows a new profile to be prototyped and tested with lower cost, lower risk, carbide cutting edges. Once the new profile is approved, continuous production can then be started using the same tool body with diamond inserts. Optimize the cutting edge for different applications. Reduce inventory of tools on hand. Introduce a new profile or produce a short run using quick deliery of carbide knives. Full utilization of a standard tool body compliments today s LEAN manufacturing systems. 5) Automatic knife positioning & rear single screw tightening save time Knives are automatically and accurately positioned hands free. The large rear mount screw is easily tightened. Tool changes are faster and more accurate. One common body style standardizes tooling set-up in the tool room and out at the machine. Machine settings do not have to be adjusted after a knife change or service due to constant diameter and profile positioning. GLOBAL SAVINGS ON TOOL COST Example with 1 backup Conventional Diamond Next G Diamond Global tool & 4 profiles Head (6 sharp./tool) ( sharp./knv) Savings Initial Cost $10,117 $7,379 7% After 5 lifetimes period $10,117 $7,379 7% After 10 lifetimes period $11,434 $8,015 30% After 15 lifetimes period $13,630 $9,606 30% *calculation made with a lifetime period 15 production days (based on a production of 10h/day at a feed rate of 10m/min with diamond edges) 14 Contact your local NAP GLADU representative for more information or to request a quotation.

15 Design What hook angles are available? 5, 10, 15, 0 as standard. 0 & 5 as custom w/$300 surcharge. What shear angles are available? 0, 5, 10, 15 as standard Is alternate shear available? Yes, on tool bodies with an even number of wings (,4, 6, 8) Are custom body sizes available? Yes, custom body sizes are available at an upcharge. See the price list for details. Next G bodies can be customized between 75mm and 300mm diameter. What is the minimum cutting circle for each body diameter? Minimum cutting circle is between 4mm to 8mm greater than body diameter. Otherwise specify a custom body diameter. What are the maximum bore sizes for each body diameter? Maximum bore size is in relation to body diameter, number of teeth and hook angle. Ask for the chart of Max bore diameter (mm) vs the number of teeth. Can Next G be mounted on a tool holder for CNC use? Yes, using an ETP Hydro Grip tool holder. Price on request. Is Next G available with an aluminum body to save weight? No. Aluminum bodies are NOT available. Frequently Asked Questions Profile How do we calculate the price of diamond knives? Measure the wood profile length as for standard diamond tools and refer to the Next G Series price list for the applicable price. Design dept. will confirm correct profile length at time of tool drawing. What is the maximum profile depth that can be cut with the Next G Series? 5.8mm as far as the wood surface area removed by the knives while respecting the max Sf value of the head. What is the Sf value? The Sf value is the surface area of material removed by the profile of cut. Each tool body has a Sf max value calculated and laser printed. You can buy any profile to fit your head as long as the material surface area removed is lower than the Sf max. of the head. Why is the Sf value important? To preserve user s security and tool integrity, Next G head has a min. RPM, max. RPM and max. Sf values. How do I determine Sf value? Sf value is determined at the time of tool design. To correctly determine the Sf value, we use a CAD system. Can different profiles with similar dimensions be used with the same back clamp? (similar to the Perfect Match System) Yes. As long as the knife projection of all profiles is less than 3.48mm (0.137 ) from the back clamp. There is a surcharge of 30% over the Back-Clamp price list to get this option. Note that the number of face sharpenings will then be reduced. How do we machine material thickness greater than 50mm? (example: exterior doors at 1-3/4 ) Material greater than 50mm thickness may be able to be machined with a piece assembly. The design department will develop the concept and price on request. Can we machine raise panels with the Next G Series? Next G Series is mainly dedicated to outside profile, mouldings and stile & rail applications. It can be used for Raised Panels but the max. profile depth is limited to 38.1mm with 45 custom angled body. For raised panel profiles, ask for our Next G Plus Serie for Raised Panel Head. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 15

16 Operation Why are there min. and max. RPM speeds for each tool? The RPM range is there for user safety. Also, the Sf max. value is determined based on min. and max. RPM limits. If you need to operate the tool out of this range, ask for a custom head spec. What happens if a tool runs below the min. RPM? The clamping system will not reach the optimal holding value. As with any tool, excessive chip load could result in tool or equipment damage, or personal injury. Is there a maximum feed rate for Next G? Yes. The Sf max. value is also based on a max. chip load of You can calculate max. chip load and then max. feed rate for each application. Ask if you need help with this. Frequently Asked Questions How is the constand diameter and profile position maintained with diamond knives after sharpening? Material is removed from the bottom of the alignment holes equal the removal from the profile. The knives position to the hole bottom. How is a resharpened diamond knife balanced to match the other knives? After reprofiling, a diamond Next G knife is rebalanced to match the nominal weight of the knife number. We can increase the weight by adding a copper plug in the knife and reduce the weight by removing carbide on the bottom edge on the knife. (see the How to... on pages 1-14) Are carbide & diamond knives the same thickness? Yes, carbide and diamond knives are both mm thick at the clamping area. Diamond knives are 3mm thick at the edge. Can we use the same knives and back clamps on different diameter heads? The heads must have the same specifications including Sf, hook and shear. In a different diameter head (if all specs are compatible) the profile will be distorted. If that is acceptable, then you can do this. Can we mix carbide and diamond knives on the same head? NO. Carbide and diamond knives cannot be mixed on the same tool body. They have a different weight and it will unbalance the tool. Use only all carbide or all diamond knives at one time. Service What is the best way to clean the knife seat when changing knives? Compressed air (with eye protection) to remove wood dust. Nylon brush or cloth with liquid cleaners for resin, then dry off. Do not scratch the knife seat area with hard tools. Is a carbide knife resharpened on the face or the profile? It is resharpened on the face of the cutting area only. The clamping area must not be reground as resharpened knives have to fit the Next G head after servicing. How many times can a carbide knife be reprofiled? Two or three face sharpenings are possible. Always send all knives in a set for servicing. Use knives in the same sets as serviced. How many times can a diamond knife be reprofiled? times, if the chipping is minimal. The damage must not exceed 0.7m. If it s between 0.4mm and 0.7mm, it can be reprofiled but you lose 1 service. If damage is less than 0.4mm, we can resharpened and still have another service possibility. Can new and resharpened knives be used together? Only new and resharpened diamond knives can be used together as they are reprofiled with matching diameters and rebalanced to original weight. New and resharpened carbide knives cannot be mixed because they are sharpened on the face, so diameters will not match and the balance will be different. Use carbide knives in sets as returned from service. What parts need to be replaced in a preventive maintenance program? Screws, clamps, springs, and knives must be replaced if you see any wear, damage or deformation. However, the body is designed to last years as it is manufactured with a special process to prevent wear. Can the springs on the back clamp be replaced? You can replace the springs in back clamps if you accidentally damage it or the spring action is not working properly. Order the available Spring replacement kit. Can carbide and diamond knives be sharpened at all NG service centers? Service is performed only at the service centers that have received the proper instructions and training. What size is the Allen wrench for the rear screw? M8 What if a Next G had is crashed in a machine? DO NOT use any longer. Return to Marieville for evaluation, repair or replacement. User safety is our highest concern. 16 Contact your local NAP GLADU representative for more information or to request a quotation.

18 The original Next G Series provides great advantages such as the 1 screw automatic clamping system and a greater number of wings. The new Next G Plus series of tools presents the same advantages as the Next G Series with Back- Clamps.Limitations exist with the Next G Series (max. cutting depth or inside multi-profile router bit), but the Next G Plus Series does not have these limitations. Comparison Next G and Next G Plus Both Series together can now cover a wide range of tools and wood profiles. Here s a comparison table of both system s features. Raised Panel Cutter Head Success Story Feature / Caractéristique Next G Series Next G Plus Series Constant Knives position after Resharpening* YES YES Carbide or Diamond Knives on the same body YES YES Resharpenable* times with constant weight times with constant weight Knives Thickness mm Knives 3mm Knives Multi-Profiler With Back-Clamps No Back-Plate (max cutting depth = 8mm) (max cutting projection = 8mm) Knives Width 30mm, 40mm & 50mm 0mm, 30mm, 40mm, 50mm & 60mm Easy Clamping, Less parts 1 screw, 1 back-clamp 1, or 3 screws automatic knives position screw on face, manually located Number of wings Up to 10 seats Up to 4 seats (with 185mm body) *Only Diamond Knives are resharpenable with Constant Edge Position. Carbide Knives can be resharpened on the face only. 18 Contact your local NAP GLADU representative for more information or to request a quotation.

19 Raised Panel Cutter Head (with 60mm & 40mm knives) Technical Drawings Double Raised Panel Cutter Head (with 50mm & 0mm knives) Inside Profile Router Bit Outside Profile Router Bit 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 19

20 Dedicated & Universal Insert Heads

21 USE ON DECORATIVE PATTERNS ONLY See Standard and Profiled Carbide Insert Catalog for Inserts. Inserts are not included in price. Pricing is for heads manufactured at Jasper. DIAMETER RANGE Cutting Width 3 Wing 4 Wing 35mm - 40mm 50mm - 60mm 80mm DIAMETER RANGE Cutting Width 3 Wing 4 Wing 35mm - 40mm 50mm - 60mm 80mm DIAMETER RANGE 8-10 Cutting Width 3 Wing 4 Wing 6 Wing 35mm - 40mm 50mm - 60mm Dedicated Face Mounted Insert INSERT SIZES AND MAXIMUM PROFILE DEPTH Width Height Thick Max. Depth NOT INCLUDED: REQUIRES A SPECIAL QUOTE Surfacing Heads (using turnover knives) Profiling units using standard ICK knives Sample Insert 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 1

22 Description of Additional Items And Special Features Additional Items Assembly < (Per Assembly) Assembly >3 (Per Assembly) Aluminum Body (Per Piece) Bevel (Per Piece) Alternate Bevel (Per Piece) Shear (Per Piece) Alternate Shear (Per Piece) Special Balancing G.5 (Per Assembly) Bearing Bearing Case Solid Carbide Body for Router Bit Hydro Bore <5 inches wide Hydro Bore >5 inches wide Chip Breaker (Per Piece) Fit TurboSand (Per Piece) Grease Fittings Kerf-O-Matic 1 Kerf-O-Matic Kerf-O-Matic 3 Key Ways (Per Piece) Angled Seats (Per Piece) Spacer (Per Piece) S-System HSK-63 Shank Tapered Shank Screwed Shank Additional Item Pricing includes: Hubs, Trepans, Mounting Holes, Bores over.15 and Sleeve Bores. No. Spurs per Piece Tongue & Groove per Assembly Finger joints inserts per Assembly wings 3 wings wings 3 wings 4 wings 3 wings 4 wings 6 wings 4 wings 6 wings 8 wings 6 wings 8 wings 10 wings 8 wings 10 wings 1 wings 10 wings 1 wings 14 wings 1 wings 14 wings 16 wings 14 wings Contact your local NAP GLADU representative for more information or to request a quotation.

23 3 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm Dedicated Insert Heads 4 DIAMETER Cutting Width Wings 3 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 5 DIAMETER Cutting Width Wings 3 Wings 4 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 6 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 3

24 Dedicated Insert Heads 7 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 8 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 4 Contact your local NAP GLADU representative for more information or to request a quotation.

25 Dedicated Insert Heads 9 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 1 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 10 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 1 Wings 14 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 5

26 3 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm Universal Insert Heads 4 DIAMETER Cutting Width Wings 3 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 5 DIAMETER Cutting Width Wings 3 Wings 4 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 6 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm Universal Head Pricing does not include Backing Plates which are priced separately. 6 Contact your local NAP GLADU representative for more information or to request a quotation.

27 Universal Insert Heads 7 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 8 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm Universal Head Pricing does not include Backing Plates. These need to be priced separately. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 7

28 Universal Insert Heads 9 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 1 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 10 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 1 Wings 14 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm Universal Head Pricing does not include Backing Plates. These need to be priced separately. 8 Contact your local NAP GLADU representative for more information or to request a quotation.

29 0.98 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 1.18 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm Insert Router Bits 1.38 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 1.57 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 1.77 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 1.97 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm.17 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm.36 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm.56 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 9

30 .76 DIAMETER Cutting Width Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm Insert Router Bits.95 DIAMETER Cutting Width Wings 3 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 3.15 DIAMETER Cutting Width Wings 3 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 3.35 DIAMETER Cutting Width Wings 3 Wings 4 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 3.54 DIAMETER Cutting Width Wings 3 Wings 4 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 3.74 DIAMETER Cutting Width Wings 3 Wings 4 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 30 Contact your local NAP GLADU representative for more information or to request a quotation.

31 3.94 DIAMETER Cutting Width Wings 3 Wings 4 Wings 15mm 0mm 5mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm Insert Router Bits Description of Additional Charges Items And Special Features NP71 NP76 NP81 NP86 NP91 NP96 NP311 NP316 NP55 NP553 NP554 NP555 Service Items and Cleaning Kit Complete Cleaning Kit Includes: 1 - NP76 1 qt. Wonder Wipe 5 - NP86 Cotton Cloths 1 - NP91 3/8 Diameter Nylon Brush 1 - NP96 Brass Brush 1 - NP311 Nylon Brush 1 - NP316 De Aqua Lube 18 oz. 1 qt. Wonder Wipe & MSDS Spray Head For Wonder Wipe Cotton Cloth 3/8 Diameter Brush 7-3/4 Brass Brush 7-3/4 Nylon Brush De Aqua Lube 18 oz. Aerosol High Pressure Grease Gun High Pressure Hose Hydraulic Connector Grease Cartridge NOTE: Any modifications not found on this page must be by special quotation only. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 31

Introducing NAP Gladu's new line of tooling Problem: Chip marks or chip dents appear on the finished surface of the wood (see photo below).

Solution: The Vanish developed by NAP Gladu has proven itself effective in the prevention of unsightly chip marks on the finished wood surface of high

Typically occurs on surfaces machined from the top spindle on the moulder. Pictured below is an example of wood surface with chip marks.

32 Introducing NAP Gladu's new line of tooling Problem: Chip marks or chip dents appear on the finished surface of the wood (see photo below). Chip marks are caused by chips that are not evacuated and become temporarily trapped between the knife edge and the finish surface of the wood. Solution: The Vanish developed by NAP Gladu has proven itself effective in the prevention of unsightly chip marks on the finished wood surface of high quality mouldings. Potential Customers: High quality cabinet or moulding manufacturers who are trying to eliminate chip marks on their product. Typically occurs on surfaces machined from the top spindle on the moulder. Pictured below is an example of wood surface with chip marks. After using the new tool design, the chip marks were eliminated with no modification to the dust collection. 3 Contact your local NAP GLADU representative for more information or to request a quotation.

33 Manufactured with aluminum body only. Pricing includes the aluminum body 6 DIAMETER Vanish Dedicated Insert Head Cutting Width Wings 3 Wings 4 Wings 6 Wings 40mm 50mm 60mm 70mm 80mm 90mm 7 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 40mm 50mm 60mm 70mm 80mm 90mm 8 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 40mm 50mm 60mm 70mm 80mm 90mm 9 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 1 Wings 40mm 50mm 60mm 70mm 80mm 90mm 10 DIAMETER Cutting Width Wings 3 Wings 4 Wings 6 Wings 8 Wings 10 Wings 1 Wings 14 Wings 40mm 50mm 60mm 70mm 80mm 90mm 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 33

34 SPECIAL ORDER QUOTE ONLY 34 Contact your local NAP GLADU representative for more information or to request a quotation.

SPECIAL ORDER QUOTE ONLY 1 locations coast-to-coast See all our products at: www.napgladu.

35 SPECIAL ORDER QUOTE ONLY 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 35

U.S. #INS-0011 Canada #138-305 Screws 8mm Double-Acting RH/LH Use with INS-0018 U.S. #INS-0013 Screws 5mm Double-Acting RH/LH Replacement Parts U.S. #INS-001 Canada #138-304 Screws 6mm Double-Acting RH/LH Use with INS-006 U.

5 thd. LH) Uses screw INS-0011 U.S. #INS-0017 Canada #137-190 Screws 5mm-8 16mm Lg. Full Dog Set U.S. #INS-0019 Canada #146-1504 Screws 5mm-7 Flat Hd.

#INS-006 Canada #168-1011 Gibbs Round (6mm-1 thd. LH) Uses screw INS-001 U.S. #NP556 Canada #190-1905 Wrench for Clamping Screw 4mm SW4 DIN 911 #93109 Canada #146-1503 Screws 5mm-7 Flat Hd.

36 U.S. #INS-0011 Canada # Screws 8mm Double-Acting RH/LH Use with INS-0018 U.S. #INS-0013 Screws 5mm Double-Acting RH/LH Replacement Parts U.S. #INS-001 Canada # Screws 6mm Double-Acting RH/LH Use with INS-006 U.S. #INS-0015 Canada # Screws 8mm-1.5 0mm Lg. Swivel Set Wedge Style U.S. #INS-0016 Canada # Screws 6mm mm Lg. Full Dog Set Wedge Style U.S. #INS-0018 Canada # Gibbs Round (8mm-1.5 thd. LH) Uses screw INS-0011 U.S. #INS-0017 Canada # Screws 5mm-8 16mm Lg. Full Dog Set U.S. #INS-0019 Canada # Screws 5mm-7 Flat Hd. / T15 Torx (Previously slotted screw) For use with spurs U.S. #INS-006 Canada # Gibbs Round (6mm-1 thd. LH) Uses screw INS-001 U.S. #NP556 Canada # Wrench for Clamping Screw 4mm SW4 DIN 911 #93109 Canada # Screws 5mm-7 Flat Hd. / T0 Torx (Previously slotted screw) For use with spurs 36 Contact your local NAP GLADU representative for more information or to request a quotation.

37 Cleaning Procedure for Insert Cutting Tools It is very important that the procedures outlined below be followed in order to have trouble free performance from your cutting tool. Once your cutting tool has been disassembled, each part must be thoroughly cleaned prior to reloading. Since some varieties of wood produce resins which adhere to these parts, it is very important that all of this residue be removed. All surfaces of the wedge (1), new insert knife () and backing plate (3) should be inspected for damage, cleaned and replaced if necessary. Special care must be taken if you are using a turnable insert. When rotating a turnable insert, the insert must be cleaned and the edge that locates on the seat region (4) of the cutter head must be free from debris, resins and chips. If there was a broken or damaged insert prior to disassembly, that backing plate must be inspected for flatness. If there is any warp or twist in the backing plate, the insert will likely fail if it is used again. It is a good idea to have a minimum of 1 complete set of backing plates on hand for your tool changes when using insert cutting tools. 1. Clean the wedge pocket area (5) by thoroughly removing any dust, debris or residue. The use of compressed air is recommended to blow away the loose sawdust. Do not use a file or screwdriver to clean any part of your cutter head or various parts. The seat region as well as all other parts are precision ground and the use of such tools can scratch the surface and produce runout in the cutter head.. We recommend that you use a brass or nylon brush to remove any stubborn build-up or residue. (These brushes are available in the NAP Gladu cleaning kit which can be purchased separately.) 3. There are certain areas that you must pay particular attention to when cleaning. The seat region (5) that the carbide insert rests on when loaded must be exceptionally clean and free of any burrs or deformations. This seat region area is responsible for maintaining a constant cutting circle with a minimum amount of runout. Even the smallest amount of debris can cause outside diameter runout. 4. Where the seat region (4) intersects the stop screw (6) is also a vulnerable area where debris and resins can build-up. This area is somewhat difficult to clean but is of vital importance. 5. Do not attempt to adjust or remove the stop screw (6) because it is responsible for the axial alignment of the inserts and is preset at the factory. 6. Use a cleaning solvent such as our Wonder Wipe, kerosene, lacquer thinner or oven cleaner to remove any resin build-up. Allow the effected areas to soak for a few minutes prior to cleaning. Areas that have excessive build-up may need to be scrubbed with a brass brush. Never use cleaning agents containing either alkali or acid with cutter heads made of aluminum. (Wonder Wipe is also included in the cleaning kit) Note: if you have a Hydro-bore mounting system, do not soak the unit in any solution due to the possibility of deterioration of the O-rings. 7. Once the parts have been cleaned and inspected, they should be wiped with a dry type rust inhibitor. If you are using a combination lubricant and rust inhibitor such as Sandaro Top Cote or WD-40, be sure to wipe off any excess lubricant with a clean cloth. (Sandaro Top Cote is also available in the cleaning kit) 8. Visually inspect the entire cutting tool including the bore for any defects or burrs. NAP Gladu offers a complete cleaning kit with everything you need for your insert cutting tool. If you would like to purchase this cleaning kit, please contact your sales representative or call us toll free TOOL (8665) 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 37

39 Standard & Profiled Carbide Inserts

40 STANDARD TURNOVER KNIVES Pages Locate the correct insert by looking at the various sizes and drawings in the catalog. Drawing typically start from the smallest and progress to the largest within the particular class of inserts.. All drawings are drawn to scale (1:1). All are in a face coming position. (Imagine the insert coming towards you). 3. Page through the catalog in the green section and locate the drawing that best represents an existing insert. Position the insert over the drawing and check to be sure the holes and overall dimensions line up. 4. Measure the overall dimensions of the existing insert to be sure the Width, Height, and Thickness are the same as what is indicated under the dimension block WxHxT. 5. Once you have verified that the overall dimensions and hole location(s) are correct you must identify the type of material that you are going to apply to the insert. Example: 50x1x1.5 Insert has two applications A. TJ16 General Purpose B. TJ18 Man-Made Material Note: Most inserts found in the woodworking industry are general purpose. It is suggested that you try this grade first for your application. If you are machining man-made material such as MDF, Particleboard, etc. then the Man- Made Material grade will perform better than the general purpose grade. 6. Once you have decided on the insert and grade (if available) move over to the left and find the Tool Number for that item. This is the number that must be used for all orders and referencing. 7. Also note the Sold In Boxes information. Most Standard Turnover Inserts come in boxes of 10 however we do offer some that are sold individually or in different quantities. PROFILED Pages You must supply either a wood sample, mechanical drawing or an existing profiled insert that represents the exact profile the new inserts must be capable of producing. If you are duplicating an existing pattern from an insert, you must be sure that the insert has not been used or sharpened so that the edge is true to the profile required. 1. Locate the drawing in the following pages that matches the inserts used in an existing head. All drawings used in this section are exact size or 1:1. You can locate the exact insert required by placing the existing insert directly on these drawings in order to select the correct one. Be sure to look at the side view of the drawings in order to determine if the insert has a beveled top and bottom, square top with a beveled bottom or square top and bottom. 40 Ordering Instructions. Determine the carbide grade required for the given application and material/species that you are machining. Not all inserts are available in different carbide grades. If you require a specific grade that is not listed in this catalog, please contact your nearest NAP Gladu Sales Representative. 3. When making new profiles for existing cutter heads, you must supply the following information in order to correctly grind the clearances required for optimum performance. Hook Angle of the cutter head Large or small diameter of the cutter head Manufacturer of the cutter head EXISTING If you are ordering an insert that NAP Gladu did not manufacture then we need the following in order to create an exact duplicate: An unused New insert sample from your inventory that is exactly what you want duplicated. Send this insert in with your order or contact a NAP Gladu Sales Representative to make arrangements for a pickup. NEW FOR UNIVERSAL HEADS When ordering inserts with a New profile for a head NAP Gladu did not manufacture then we need the following: Head Diameter Hook Angle of the head Manufacturer of the cutter head Wood Sample or Drawing of the new profile A sample Backing Plate that is used in the head. NEW FOR DEDICATED HEADS When ordering inserts with a New profile for a head NAP Gladu did not manufacture then we need the following: An existing insert with the original pattern Head Diameter Hook Angle of the head Manufacturer of the cutter head Wood Sample or Drawing of the new profile WARNING!!!! Changes to the profile can only be small due to the steel body interference. SHARPENING 1. NAP Gladu will sharpen inserts by moving the profile further into the insert.. Mating inserts will be sharpened on the outside periphery only and all vertical sides will be left untouched. Fig All sharpening charges will be 60% of the cost for a new profiled insert. This is to re-profile the pattern. 4. All sharpened inserts will be identified by a notch located on the side of the insert. This notch indicates that the insert was sharpened. Each time an insert is sent in for sharpening, another notch is ground into the insert. Each notch indicates that.005 has been removed from the original profile configuration. Contact your local NAP GLADU representative for more information or to request a quotation.

41 CARBIDE GRADES Select the carbide grade that best suits the material you are cutting if available for the insert listed. General Purpose: Used for man-made material and natural woods. Most common grade in the industry. Natural Wood: All natural wood applications including both hard and softwoods HI Natural Wood: High impact applications such as knots found in natural wood. Man-Made Material: Man made composite materials such as MDF, Particle Board, Plywood, Etc. Ordering Instructions Clamping Wedge.005" Original Insert Thickness Remains The Same Throughout The The Sharpening Process. Progressive Progressive O.D. O.D. Grinding Grinding Of Of The The Insert Insert Moves Moves The The Profile Profile Down Down Into Into The The Insert Insert And And is Is A A Safe Safe Method Of Of Sharpening. Progressive Face Grinding Results In A Very Thin Insert Vertical Sides are Not Ground.005" Fig " Each Notch on Side Indicates one Sharpening. (.005 ) 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 41

42 4 1 Standard Turnover Carbide Knives TJ111Q Q 7.5x1x1.5 GP 10 TJ518A Q 7.5x1x1.5 MM-MDF TJ11A 9x1x1.5 GP TJ47Q Q 9.6x1x1.5 GP TJ58A Q 10.5x10.5x1.5 GP TJ473Q Q 10.5x1x1.5 GP TJ5A Q 11x1x1.5 GP TJ113A 10x1x1.5 GP Ø6.6 Ø TJ156Q Q 1x1x1.5 GP 10 TJ157A Q 1x1x1.5 MM-MDF 10 TJ484Q Q 1x1x1.5 MM-HDF TJ Q 10.5x10.5x1.5 NW Contact your local NAP GLADU representative for more information or to request a quotation.

43 Standard Turnover Carbide Knives Ø10 TJ57A Q 1x1x MM-HDF TJ471A Q 13x1x1.5 GP 10 TJ539A Q 13x1x1.5 MM-MDF 10 TJ490A Q 14x14x1. GP TJ x14x GP TJ487Q Q 14.3x14.3x.5 NW 10 TJ114Q Q 15x1x1.5 GP 10 TJ519A Q 15x1x1.5 MM-MDF 10 Ø10 Ø6.3.5 TJ486Q Q 14x14x MM-MDF 10 TJ Q 14x14x NAW 10 TJ Q 15x15x GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 43

44 Standard Turnover Carbide Knives TJ474Q Q 17x1x1.5 GP 10 Ø17 Ø4 TJ116A A 0x1x1.5 NW 10 TJ117Q Q 0x1x1.5 GP 10 TJ118Q Q 0x1x1.5 MM-MDF 10 TJ470Q Q 0x1x1.5 MM-HDF 10 Ø17 Ø TJ485A Q 17x17x GP TJ53A A 18x1x1.5 GP TJ540A 0B-5401Q 19.4x1x1.5 GP TJ475A Q 4.7x1x1.5 GP TJ115A 19.5x1x1.5 GP 10 TJ1A 5x1x1.5 GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 44 Contact your local NAP GLADU representative for more information or to request a quotation.

45 14 Standard Turnover Carbide Knives TJ538Q Q 9x1x1.5 MM-MDF TJ59A Q 9x1x1.5 GP TJ498Q Q 9.5x9x1.5 GP TJ501Q 1B-5101Q 9.3x1x1.5 MM-MDF TJ A 9.5x1x1.5 MM-MDF 10 TJ48A A 9.5x1x1.5 MM-MDF TJ500Q 1A-5101Q 9.3x1x1.5 MM-MDF TJ54A x1x1.5 MM-MDF Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 45

46 Standard Turnover Carbide Knives TJ119Q 0-540Q 30x1x1.5 GP 10 TJ11Q Q 30x1x1.5 MM-MDF 10 TJ476Q Q 30x1x1.5 MM-HDF 10 TJ144A A 30x1x1.5 GP 10 TJ147A A 30x1x1.5 GP 10 TJ149A A 30x1x1.5 GP TJ55A x1x1.5 MM-MDF TJ153A A 30x1x1.5 GP TJ384Q Q 9.5x1x1.5 GP 10 TJ493Q Q 9.5x1x1.5 MM-MDF 10 TJ49Q Q 9.5x1x1.5 MM-HDF TJ14A Q 39.5x1x1.5 GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 46 Contact your local NAP GLADU representative for more information or to request a quotation.

47 Standard Turnover Carbide Knives TJ13Q Q 40x1x1.5 GP 10 TJ478A Q 40x1x1.5 MM-HDF 10 TJ15 40x1x1.5 GP TJ53A Q 49x1x1.5 MM-MDF TJ496Q Q 49.x1x1.5 MM-MDF 10 TJ497Q Q 49.5x1x1.5 GP 10 TJ16Q Q 50x1x1.5 GP 10 TJ18Q 0-510Q 50x1x1.5 MM-MDF 10 TJ477Q 0-500Q 50x1x1.5 MM-HDF TJ Q 49.x1x1.5 MM-HDF TJ19A A 50x1x1.7 GP 10 TJ514Q Q 50x1x1.7 MM-MDF 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 47

48 Standard Turnover Carbide Knives TJ Q 60x1x1.5 GP 10 TJ13Q Q 60x1x1.5 GP 10 TJ479Q Q 60x1x1.5 MM-MDF TJ Q 80x13x. MM-MDF 10 TJ135Q Q 80x13x. GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 48 Contact your local NAP GLADU representative for more information or to request a quotation.

49 59 Standard Turnover Carbide Knives TJ483 0C-5901A 80.4x13x. GP TJ517A Q 8x5.5x1.1 NW TJ138Q x13x. GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 49

50 90 Standard Turnover Carbide Knives TJ530A A 100x13x. MM-MDF 10 TJ541A A 100x13x. GP TJ141A Q 10x13x. GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 50 Contact your local NAP GLADU representative for more information or to request a quotation.

51 FOR SPURS AND GROOVERS Standard Turnover Carbide Knives Corner Breaks Slight Radius Corner to Corner 9.5 Countersink 15 NAP Gladu Replacement 15.5 TJ159Q Q 14x14x1. GP 10 TJ173Q EC 15x15x.5 GP 10 TJ50Q Q 15x15x.5 NW 10 TJ533A Q 15x15x.5 MM 10 TJ180Q 15x15x.5 VHI 10 TJ16A 14x14x1.7 GP 10 Replacement for OERTLI Castor-Finish Spiral Cutter Head TJ175A 15x15x.5 GP 10 TJ168Q Q 14x14x GP 10 TJ165Q Q 14x14x NW 10 TJ174A 18x18x1.95 GP 10 TJ169A 15x15x.5 GP 10 TJ177A 18x18x.45 GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood, VHI - Very High Impact 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 51

52 FOR SPURS AND GROOVERS Standard Turnover Carbide Knives TJ171A A 14x14x3 GP Ø Ø TJ Q 18x18x.95 NW TJ Q 18x18x1.95 NW TJ510Q Q 18x18x3.7 NW 10.5 TJ A 18x18x.5 NW 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 5 Contact your local NAP GLADU representative for more information or to request a quotation.

53 FOR ROUTER BITS Specialty Carbide Inserts TJ179A 1x5.5x1.1 GP 10 TJ183A 0x5.5x1.1 GP 10 TJ186A 30x5.5x1.1 GP 10 TJ188A 30x5.5x1.1 MM 10 TJ19A 50x5.5x1.1 GP 10 TJ198A 30x5.5x1.1 GP 10 TJ11A 40x5.5x1.1 GP 10 TJ189A 40x5.5x1.1 GP 10 TJ14A 50x5.5x1.1 GP 10 TJ195A 0x5.5x1.1 GP 10 TJ17A 0x5.5x1.1 GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 53

54 FOR ROUTER BITS Specialty Carbide Inserts TJ19A 30x5.5x1.1 GP 10 TJ3A 40x5.5x1.1 GP 10 TJ6A 50x5.5x1.1 GP 10 TJ35A 30x5.5x1.1 GP 10 TJ38A 40x5.5x1.1 GP 10 TJ41Q 50x5.5x1.1 GP 10 TJ9A 0x5.5x1.1 GP 10 TJ381Q 8x7x1.5 GP 10 TJ3A 5x5.5x1.1 GP 10 TJ389A 16x7x1.5 GP 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 54 Contact your local NAP GLADU representative for more information or to request a quotation.

55 FOR ROUTER BITS Specialty Carbide Inserts 7 5 TJ374A 5x7x5 GP 0 TJ383Q 18x7x GP Ea TJ379A 5x6x5 GP 0 TJ37A 4x13x4 GP Ea. TJ377A 0x7x GP Ea. Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 55

56 FOR ROUTER BITS Specialty Carbide Inserts SIDEWINDER Countersink TJ353A 16xx5 GP Ea. TJ356A 16xx5 GP Ea. TJ359A 16xx5 GP Ea. 18 U.S. Sidewinder Dimensions Carbide Sold in Part No. Head Dia. WxHxT Grade Boxes of TJ450RA 10mm 16.8x15x9 NW 10 TJ456LA 10mm 16.8x15x9 NW 10 TJ460RA 17mm 16.8x15x9 NW 10 TJ466LA 17mm 16.8x15x9 NW 10 TJ411RQ 139mm 16.8x15x9 NW 10 TJ416LQ 139mm 16.8x15x9 NW 10 TJ41RQ 15mm 16.8x15x9 NW 10 TJ46LQ 15mm 16.8x15x9 NW 10 TJ431RQ 165mm 16.8x15x9 NW 10 TJ436LQ 165mm 16.8x15x9 NW 10 TJ44RQ 197mm 16.8x15x9 NW 10 TJ446LQ 197mm 16.8x15x9 NW 10 TJ550RA 10mm 16.8x15x9 MM 10 TJ556LA 10mm 16.8x15x9 MM 10 TJ560RA 17mm 16.8x15x9 MM 10 TJ566LA 17mm 16.8x15x9 MM 10 TJ511RA 139mm 16.8x15x9 MM 10 TJ516LA 139mm 16.8x15x9 MM 10 TJ51RA 15mm 16.8x15x9 MM 10 TJ56LA 15mm 16.8x15x9 MM 10 TJ531RA 165mm 16.8x15x9 MM 10 TJ536LA 165mm 16.8x15x9 MM 10 TJ54RA 197mm 16.8x15x9 MM 10 TJ546LA 197mm 16.8x15x9 MM TJ36A 16xx5 GP Ea. 56 Contact your local NAP GLADU representative for more information or to request a quotation.

57 FOR ROUTER BITS Specialty Carbide Inserts R R TJ Q 16xx5 NW 10 Ø TJ A 16x17.5x GP TJ505Q Q 16x.03x5 NW R3 5 TJ503A Q 16x17.5x GP (5.) (9.35) 0.5 (11.5) TJ515A Q 18x5.69x3.5 NW 10 TJ506A Q 11.5x11.5x4 MM-MDF 10 Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 57

FOR ROUTER BITS Specialty Carbide Inserts TJ441A 50x4.8x. GP Ea. TJ457A 50x.3x. GP Ea. TJ461A 50x.3x. GP Ea. TJ444A 50x0.x. GP Ea. TJ447A 50x0.x. GP Ea. TJ464A 50x4.8x. GP Ea. TJ467A 50x4.8x. GP Ea. TJ451A 50x0.

Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order.

58 FOR ROUTER BITS Specialty Carbide Inserts TJ441A 50x4.8x. GP Ea. TJ457A 50x.3x. GP Ea. TJ461A 50x.3x. GP Ea. TJ444A 50x0.x. GP Ea. TJ447A 50x0.x. GP Ea. TJ464A 50x4.8x. GP Ea. TJ467A 50x4.8x. GP Ea. TJ451A 50x0.3x. GP Ea. TJ454A 50x0.3x. GP Ea. TJ311A 40x0.8x. GP Ea. Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 58 Contact your local NAP GLADU representative for more information or to request a quotation.

59 FOR ROUTER BITS Specialty Carbide Inserts TJ317A 40x0x. GP Ea. TJ319A 40x0x. GP Ea. TJ335A 40x19.x. GP Ea. TJ338A 40x19.x. GP Ea. TJ33A 40x17.x. GP Ea. TJ36A 40x17.x. GP Ea. TJ341A 40x0.x. GP Ea. TJ344A 40x0.x. GP Ea. TJ39A 40x18.x. GP Ea. TJ33A 40x18.x. GP Ea. Q - Quick Ship (stock item) shipped within 4 hours. Although we normally stock items, we do not have an unlimited supply. Please call to confirm quantities on hand before ordering. A - Available (non-stock item) shipped within 5 days from date of order. NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 59

60 Insert Profile Zone For new profiles please refer to the Profile Zone Graph to determine the size of the insert blank. Note the starting point 0, 0 is in the bottom left hand corner. However, your profile, from a wood sample or drawing must be placed above the non-profile zone. From there you should be able to figure the length and width of the insert blank size. (Please refer to figure for example) Figure 1 Height of knives Length of wood Depth of wood profile Length of knives Figure *Example below will use a 30x30 insert blank. Length of wood Height of knives Depth of wood profile Length of knives 60 Contact your local NAP GLADU representative for more information or to request a quotation.

61 NON-TURNABLE - NO HOLES Flat Bottom Carbide Inserts A 0x30.5x HNW Ea. 460S S 0x30.5x HNW Ea A 35x30.5x HNW Ea A 35x30.5x NW Ea. 4790S A 35x30.5x HNW Ea. 4804S A 35x30.5x NW Ea , A 50.6x30.5x1.5 GP Ea. 4794S S 50.6x30.5x1.5 GP Ea Q 50x30x NW Ea. 479S S 50x30x NW Ea A Q 50x5.4x1.5 GP Ea. 4600S S 50x5.4x1.5 GP Ea x30x MM-MDF Ea. 4788S S 60x30x MM-MDF Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 61

62 NON-TURNABLE - 1 HOLE Flat Bottom Carbide Inserts Q Q 1x0x GP Ea. 4606S S 1x0x GP Ea Q Q 16.4x15.4x4.1 MM-MDF Ea. 4604S S 16.4x15.4x4.1 MM-MDF Ea Q x0.5x GP Ea. 6000A x0.5x NW Ea. 6001S S 15x0.5x GP Ea. 6000S S 15x0.5x NW Ea. 4718Q Q 0x15x GP Ea. 4718S S 0x15x GP Ea Q x30.5x GP Ea. 6006S S 15x30.5x GP Ea Q Q 0x0.4x GP Ea. 607S S 0x0.4x GP Ea A 0x0.5x GP Ea. 4808S S 0x0.5x GP Ea. 6 Contact your local NAP GLADU representative for more information or to request a quotation.

63 NON-TURNABLE - 1 HOLE Flat Bottom Carbide Inserts A 0x0.5x NW Ea. 605S 0x0.5x NW Ea A x5.5x NW Ea. 6030S S 0x5.5x NW Ea Q Q 0x5.4x HNW Ea. 4610S S 0x5.4x HNW Ea A x30.5x GP Ea. 6037S 31-54S 0x30.5x GP Ea Q 0x5.4x GP Ea. 4574S 0x5.4x GP Ea Q Q 0x30.4x NW Ea. 461Q Q 0x30.4x HNW Ea. 4614S S 0x30.4x NW Ea. 461S S 0x30.4x HNW Ea S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 63

64 NON-TURNABLE - 1 HOLE Flat Bottom Carbide Inserts A 4x5.5x HNW Ea. 4810S S 4x5.5x HNW Ea Q 5x5.5x GP Ea. 4806S S 5x5.5x GP Ea. 4608Q Q 4x35.4x GP Ea. 4608S S 4x35.4x GP Ea. 6057A x30.4x NW Ea. 6057S S 5x30.4x NW Ea. 4576Q 5x5.4x GP Ea. 4590Q 5x5.4x MM-MDF Ea. 4576S 5x5.4x GP Ea. 4590S 5x5.4x MM-MDF Ea Q 30x5.4x GP Ea. 4766S 30x5.4x GP Ea S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 64 Contact your local NAP GLADU representative for more information or to request a quotation.

65 NON-TURNABLE - 1 & HOLES Flat Bottom Carbide Inserts 5 500A x30.4x NW Ea. 500S S 30x30.4x NW Ea A 5.15x5x GP Ea. 481S S 5.15x5x GP Ea. 5 Ø A x35.5x NW Ea. 6085S S 30x35.5x NW Ea. 6078A x5.4x GP Ea. 6078S S 30x5.4x GP Ea x1.5x GP Ea. 4760S x1.5x GP Ea. 4770A 30x5.4x GP Ea. 4770S 30x5.4x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 65

66 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts Q 30x30x GP Ea. 4816S 3-541S 30x30x GP Ea A 3-680Q 30x30.4x NW Ea. 4676S 3-680S 30x30.4x NW Ea A 30x30x3 GP Ea. 480S S 30x30x3 GP Ea. 6079Q 30x30.4x GP Ea. 6079S 30x30.4x GP Ea Q x30.4x GP Ea. 608S S 30x30.4x GP Ea Q 3-540Q 30x35.4x GP Ea. 4670Q 3-660Q 30x35.4x HNW Ea. 468S 3-540S 30x35.4x GP Ea. 4670S 3-660S 30x35.4x HNW Ea. 66 Contact your local NAP GLADU representative for more information or to request a quotation.

67 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts 4666A Q 30x35.4x GP Ea. 4666S S 30x35.4x GP Ea Q Q 30x45.4x GP Ea. 4658S S 30x45.4x GP Ea A 3-510A 30x35.5x MM-MDF Ea. 464S 3-510S 30x35.5x MM-MDF Ea. 4656Q 3-549Q 33x40x GP Ea. 4656S 3-549S 33x40x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 67

68 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts Q 3-547Q 35x5.4x GP Ea. 4654S 3-547S 35x5.4x GP Ea Q x5x GP Ea. 6114S S 40x5x GP Ea. 459Q 35x5.4x GP Ea. 459S 35x5.4x GP Ea Q 40x5x GP Ea. 4630S S 40x5x GP Ea. 6110Q x0.4x GP Ea. 6110S S 40x0.4x GP Ea Q 40x5x GP Ea. 4814S S 40x5x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 68 Contact your local NAP GLADU representative for more information or to request a quotation.

69 6.5 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts 458Q 40x5.4x GP Ea. 458S 40x5.4x GP Ea Q Q 40x30x3 GP Ea A 40x30x3 GP Ea. 463S S 40x30x3 GP Ea. 4818S S 40x30x3 GP Ea. 466Q Q 40x30.x GP Ea. 4786A A 40x30.x MM-MDF Ea. 4674Q Q 40x30.x NW Ea. 4668Q Q 40x30.x HNW Ea. 466S S 40x30.x GP Ea. 4786S S 40x30.x MM-MDF Ea. 4674S S 40x30.x NW Ea. 4668S S 40x30.x HNW Ea Q 40x30.4x MM-MDF Ea. 4778S 40x30.4x MM-MDF Ea A x30.5x GP Ea. 6115S S 40x30.5x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 69

70 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts A Q 40x35.4x GP Ea. 4634S S 40x35.4x GP Ea Q 40x40x3 GP Ea. 4638S S 40x40x3 GP Ea Ø Q Q 40x40.x GP Ea. 4636S S 40x40.x GP Ea. 456Q Q 50x5.x GP Ea. 467Q Q 50x5.x HNW Ea. 456S S 50x5.x GP Ea. 467S S 50x5.x HNW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 70 Contact your local NAP GLADU representative for more information or to request a quotation.

71 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts 6661Q x5.4x NW Ea. 6661S S 50x5.4x NW Ea. 5997Q 3-546Q 50x35.4x GP Ea. 5997S 3-546S 50x35.4x GP Ea. 4594Q 50x5.4x GP Ea. 4594S 50x5.4x GP Ea Q 3-545A 60x35.4x GP Ea. 465S 3-545S 60x35.4x GP Ea. 6.5 Ø Q Q 50x30.4x GP Ea. 4580S S 50x30.4x GP Ea A 60x35x3 GP Ea. 464S S 60x35x3 GP Ea. 3 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 71

72 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts Q 60x40x HNW Ea. 484S S 60x40x HNW Ea. 40 Ø Q Q 70x30x GP Ea. 466S S 70x30x GP Ea Ø Q 60x45.5x GP Ea. 4644S S 60x45.5x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 7 Contact your local NAP GLADU representative for more information or to request a quotation.

73 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts 4660Q Q 70x40.4x GP Ea. 4660S S 70x40.4x GP Ea Q Q 80x5x GP Ea A 80x5x HNW Ea. 4646S S 80x5x GP Ea. 48S S 80x5x HNW Ea Ø4.6 S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 73

74 NON-TURNABLE - HOLES Flat Bottom Carbide Inserts 4650Q 3-544Q 80x45.4x GP Ea. 4650S 3-544S 80x45.4x GP Ea Q Q 90x5.4x GP Ea. 4664S S 90x5.4x GP Ea Q 3-540Q 90x40x3 GP Ea. 4648S 3-540S 90x40x3 GP Ea. 74 Contact your local NAP GLADU representative for more information or to request a quotation.

75 NON-TURNABLE - HOLES Flat Bottom Specialty Carbide Inserts 4756Q A 30x35.8x GP Ea. 4756S S 30x35.8x GP Ea. 4694Q Q 60x30.x GP Ea. 4694S S 60x30.x GP Ea A 30.5x5x1.5 GP Ea. 483S S 30.5x5x1.5 GP Ea Q Q 60x40.x GP Ea. 4696S S 60x40.x GP Ea Q 33x35x GP Ea. 4834S S 33x35x GP Ea. 470Q Q 60x40.4x HNW Ea. 470S S 60x40.4x HNW Ea. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 75

76 NON-TURNABLE - HOLES Flat Bottom Specialty Carbide Inserts A 60x41x3 GP Ea. 4698S S 60x41x3 GP Ea Q Q 40x50.3x GP Ea. 4706S S 40x50.3x GP Ea A 80x45x3 GP Ea. 4700S S 80x45x3 GP Ea. 4704Q Q 40x60.x GP Ea. 4704S S 40x60.x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 76 Contact your local NAP GLADU representative for more information or to request a quotation.

77 NON-TURNABLE - HOLES Flat Bottom Specialty Carbide Inserts Q 35x35.3x GP Ea. 4708S S 35x35.3x GP Ea. 4710Q 40x30.4x GP Ea. 4710S 40x30.4x GP Ea S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 77

78 NON-TURNABLE - HOLES Flat Bottom Specialty Carbide Inserts 471Q 3D-5414A 50x30.4x HNW Ea. 4714Q 3D-6607A 50x30.4x HNW Ea. 471S 3D-5414S 50x30.4x HNW Ea. 4714S 3D-6607S 50x30.4x HNW Ea A 3D-6801Q 80x5.5x GP Ea. 4836S 3D-6801S 80x5.5x GP Ea D-680Q 80x5.5x3 HNW Ea. 4716S 3D-680S 80x5.5x3 HNW Ea. 78 Contact your local NAP GLADU representative for more information or to request a quotation.

79 NON-TURNABLE - 1 HOLE Beveled Bottom Carbide Inserts Q x0.4x GP Ea. 6190S S 15x0.4x GP Ea A 15x30.4x HNW Ea. 4776S 15x30.4x HNW Ea. 6191Q Q 15x5.4x GP Ea. 6191S S 15x5.4x GP Ea. 605Q Q 0x0.4x GP Ea. 605S S 0x0.4x GP Ea. 6193Q x30.4x GP Ea. 6193S S 15x30.4x GP Ea. 610Q Q 0x5.4x GP Ea. 476Q 0x5.4x HNW Ea. 610S S 0x5.4x GP Ea. 476S 0x5.4x HNW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 79

80 NON-TURNABLE - 1 HOLE Beveled Bottom Carbide Inserts 615Q Q 0x30.4x GP Ea. 615S S 0x30.4x GP Ea. 4764Q 0x30.4x HNW Ea. 4764S 0x30.4x HNW Ea Q Q 0x35.4x NW Ea. 470Q Q 0x35.4x GP Ea. 478S S 0x35.4x NW Ea. 470S S 0x35.4x GP Ea Q 0.6x5x HNW Ea. 474S S 0.6x5x HNW Ea Q Q 5x0.4x GP Ea. 635S S 5x0.4x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 80 Contact your local NAP GLADU representative for more information or to request a quotation.

81 NON-TURNABLE - 1 HOLE Beveled Bottom Carbide Inserts 640Q Q 5x5.4x GP Ea. 641Q Q 5x5.4x HNW Ea 640S S 5x5.4x GP Ea. 641S S 5x5.4x HNW Ea. 670Q Q 30x0.4x GP Ea. 670S S 30x0.4x GP Ea. 645Q x30.4x GP Ea. 645S S 5x30.4x GP Ea. 476Q Q 30x0.4x HNW Ea. 476S S 30x0.4x HNW Ea. 650Q Q 5x35.4x GP Ea. 650S S 5x35.4x GP Ea. 675Q Q 30x5.4x GP Ea. 4730Q Q 30x5.4x NW Ea. 4768Q 30x5.4x HNW Ea. 675S S 30x5.4x GP Ea. 4730S S 30x5.4x NW Ea. 4768S 30x5.4x HNW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 81

82 NON-TURNABLE - 1 HOLE Beveled Bottom Carbide Inserts 680Q Q 30x30.4x GP Ea. 681Q x30.4x HNW Ea. 680S S 30x30.4x GP Ea. 681S S 30x30.4x HNW Ea. 685Q Q 30x35.4x GP Ea. 686A x35.4x NW Ea. 687Q x35.4x HNW Ea. 685S S 30x35.4x GP Ea. 686S S 30x35.4x NW Ea. 687S S 30x35.4x HNW Ea Q x40.4x GP Ea. 6469S S 30x40.4x GP Ea. 6300Q x0.4x GP Ea. 6300S S 35x0.4x GP Ea. 6305Q x5.4x GP Ea. 6305S x5.4x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 8 Contact your local NAP GLADU representative for more information or to request a quotation.

83 NON-TURNABLE - 1 HOLE Beveled Bottom Carbide Inserts 6310Q x30.4x GP Ea. 6310S S 35x30.4x GP Ea. 6315Q Q 35x35.4x GP Ea. 6315S S 35x35.4x GP Ea A Q 35x40.4x GP Ea. 6471S S 35x40.4x GP Ea. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 83

84 NON-TURNABLE - HOLE Beveled Bottom Carbide Inserts 4586A 30x5.4x GP Ea. 4586S 30x5.4x GP Ea Q Q 30x35.4x GP Ea. 474S S 30x35.4x NAW Ea Q x5.4x HNW Ea. 6330S S 30x5.4x HNW Ea Q 31.8x5.4x GP Ea. 4744S S 31.8x5.4x GP Ea For Replacement Inserts Q 30x30.4x GP Ea. 4588S 30x30.4x GP Ea Q x40.4x GP Ea. 6468S S 30x40.4x GP Ea. 84 Contact your local NAP GLADU representative for more information or to request a quotation.

85 NON-TURNABLE - HOLES Beveled Bottom Carbide Inserts 4746Q Q 35x5.4x NAW Ea. 4746S S 35x5.4x NAW Ea A 40x0.4x GP Ea. 477A 40x0.4x NW Ea. 4584S 40x0.4x GP Ea. 477S 40x0.4x NW Ea A 35x30.5x GP Ea. 4844S S 35x30.5x GP Ea A 40x0.8x GP Ea. 4846S S 40x0.8x GP Ea Ø4.1 For Replacement Inserts Q x40.4x GP Ea. 6470S S 35x40.4x GP Ea A Q 40x5.4x GP Ea. 4748S S 40x5.4x GP Ea. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 85

86 NON-TURNABLE - HOLES Beveled Bottom Carbide Inserts 484A Q 40x5.5x MM-MDF Ea. 484S S 40x5.5x MM-MDF Ea. 485A Q 53x30.5x GP Ea. 485S S 53x30.5x GP Ea. 4848A Q 40x40.5x GP Ea. 4848S S 40x40.5x GP Ea. For Replacement Inserts 6357Q 60x5.4x GP Ea. 6358Q 60x5.4x HNW Ea. 6357S 60x5.4x GP Ea. 6358S 60x5.4x HNW Ea A 50x0.5x GP Ea. 4850S S 50x0.5x GP Ea. 4750A A 60x30.5x GP Ea. 4750S S 60x30.5x GP Ea. 86 Contact your local NAP GLADU representative for more information or to request a quotation.

87 NON-TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts 6335Q 40x5.4x GP Ea. 6335S 40x5.4x GP Ea. 4564Q Q 40x35x GP Ea. 4564S S 40x35x GP Ea. 6337Q x30x GP Ea. 6337S S 40x30x GP Ea Q 40x40x GP Ea. 4774S 40x40x GP Ea Q x35x GP Ea. 6341A x35x HNW Ea. 4780Q 40x35x MM-MDF Ea. 6340S S 40x35x GP Ea. 6341S S 40x35x HNW Ea. 4780S 40x35x MM-MDF Ea. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 87

88 NON-TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts 5001Q x40x GP Ea. 5001S S 40x40x GP Ea. 4580Q 50x30x GP Ea. 4580S 50x30x GP Ea. 6345Q x5.4x GP Ea. 6345S S 50x5.4x GP Ea Q x35x GP Ea. 6354S S 50x35x GP Ea. For Replacement Inserts 6350Q x30x GP Ea. 6351Q x30x HNW Ea. 6350S S 50x30x GP Ea. 6351S S 50x30x HNW Ea. 5015Q x40x GP Ea. 5015S S 50x40x GP Ea. 88 Contact your local NAP GLADU representative for more information or to request a quotation.

89 NON-TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts 5016Q x40.4x GP Ea. 5016S S 50x40.4x GP Ea. 4596Q 60x0x GP Ea. 4596S 60x0x GP Ea. 6364Q x30x GP Ea. 6364S S 60x30x GP Ea. 6363Q x35x GP Ea. 6363S S 60x35x GP Ea Q x5.4x GP Ea. 6359S S 60x5.4x GP Ea Q A 60x40x GP Ea. 6361Q x40x HNW Ea. 6360S S 60x40x GP Ea. 6361S S 60x40x HNW Ea. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 89

90 NON-TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts Q x5x NW Ea. 6370S S 80x5x NW Ea Q x30.5x GP Ea. 6371S S 80x30.5x GP Ea S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 90 Contact your local NAP GLADU representative for more information or to request a quotation.

91 TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts Q 30x5x GP Ea. 6465S 30x5x GP Ea A 40x30x GP Ea. 4858S S 40x30x GP Ea A Q 40x5x GP Ea. 4754S S 40x5x GP Ea Q 40x30x GP Ea. 6485S 40x30x GP Ea Q x30x GP Ea. 4860S x30x GP Ea Q 40x3.6x GP Ea. 6491A 40x3.6x NW Ea. 6490S 40x3.6x GP Ea. 6491S 40x3.6x NW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 91

92 TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts Q Q 40x35x GP Ea. 6495S S 40x35x GP Ea A Q 40x4.86x GP Ea. 4856S S 40x4.86x GP Ea Q 40x35x GP Ea. 501S 40x35x GP Ea Q 50x5x GP Ea. 6515S 50x5x GP Ea Q 40x40x GP Ea. 5011S 40x40x GP Ea. 9 Contact your local NAP GLADU representative for more information or to request a quotation.

93 TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts A Q 50x45x GP Ea. 650S S 50x45x GP Ea Q A 60x35x GP Ea. 6545S S 60x35x GP Ea x Q 60x35x GP Ea. 6540S 60x35x GP Ea Q 60x35x HNW Ea. 6549A 60x35x NW Ea. 6547S 60x35x HNW Ea. 6549S 60x35x NW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 93

94 TURNABLE - HOLES Beveled Top & Bottom Carbide Inserts Q A 60x40x GP Ea. 4560S S 60x40x GP Ea Q 60x4.9x GP Ea. 6550S 60x4.9x GP Ea A 80x45x.5 GP Ea. 6375S 80x45x.5 GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 94 Contact your local NAP GLADU representative for more information or to request a quotation.

95 NON-TURNABLE - HOLES Specials & Leuco Carbide Inserts 6650Q 40x36.3x GP Ea. 6650S 40x36.3x GP Ea A 40.4x35.x1.5 GP Ea. 457S 40.4x35.x1.5 GP Ea Q Q 40.5x8x1.5 GP Ea. 6175S S 40.5x8x1.5 GP Ea Q Q 40.6x8x1.5 GP Ea. 4784S S 40.6x8x1.5 GP Ea Q Q 40.6x8x1.5 NW Ea. 4758S S 40.6x8x1.5 NW Ea A Q 40.6x40.6x NW Ea. 4866S S 40.6x40.6x NW Ea. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 95

96 NON-TURNABLE - HOLES Specials & Leuco Carbide Inserts Q 50.7x35x1.5 GP Ea. 4570S 50.7x35x1.5 GP Ea A 60.6x45.6x GP Ea. 486S S 60.6x45.6x GP Ea Q 60x41x GP Ea. 6660S 60x41x GP Ea A Q 60.8x30x1.5 NW Ea. 4864S S 60.8x30x1.5 NW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 96 Contact your local NAP GLADU representative for more information or to request a quotation.

97 NON-TURNABLE - HOLES Specials & Leuco Carbide Inserts Q 61x31x GP Ea. 6180S 61x31x GP Ea (x) A 60.7x45.6x GP Ea. 6186S 60.7x45.6x GP Ea S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 97

98 NON-TURNABLE 0-50mm Special Carbide Inserts Q 50x5.5x GP Ea. 6347S 50x5.5x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 98 Contact your local NAP GLADU representative for more information or to request a quotation.

99 NON-TURNABLE - NO HOLES Jonalloy Flat Bottom Inserts U.S. Canada Dim. Sold in Q 0x30.5x NAW Ea. 4798S S 0x30.5x NAW Ea. 35 U.S. Canada Dim. Sold in A 35x30.5x NAW Ea. 480S S 35x30.5x NAW Ea. 30 U.S. Canada Dim. Sold in A 30x30.5x NAW Ea. 4800S S 30x30.5x NAW Ea. 60 U.S. Canada Dim. Sold in A 60x30x NAW Ea. 4796S S 60x30x NAW Ea. 30 S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 99

100 NON-TURNABLE - 1 HOLE Jonalloy Flat Bottom Inserts U.S. Canada Dim. Sold in 4616Q Q 15x5x NAW Ea. 4616S S 15x5x NAW Ea U.S. Canada Dim. Sold in 46Q Q 8.58x35x3.18 NAW Ea. 46S S 8.58x35x3.18 NAW Ea U.S. Canada Dim. Sold in 4618Q Q 0x30x NAW Ea. 4618S S 0x30x NAW Ea. 35 U.S. Canada Dim. Sold in Q 35x35x NAW Ea. 460S Q 35x35x NAW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 100 Contact your local NAP GLADU representative for more information or to request a quotation.

101 NON-TURNABLE - HOLES Jonalloy Flat Bottom Inserts U.S. Canada Dim. Sold in Q 30x7x NAW Ea. 4830S S 30x7x NAW Ea U.S. Canada Dim. Sold in A 40x0x NAW Ea. 488S S 40x0x NAW Ea U.S. Canada Dim. Sold in 4079Q 30x30.4x.15 NW Ea. 4079S 30x30.4x.15 NW Ea. 5 U.S. Canada Dim. Sold in 4678Q Q 40x30.x NAW Ea. 4678S S 40x30.x NAW Ea U.S. Canada Dim. Sold in 4690Q Q 30x35x NAW Ea. 4690S S 30x35.x NAW Ea U.S. Canada Dim. Sold in 4688Q Q 40x40x3 NAW Ea. 4688S S 40x40x3 NAW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 101

102 NON-TURNABLE - HOLES Jonalloy Flat Bottom Inserts U.S. Canada Dim. Sold in 468Q Q 40x40.x NAW Ea. 468S S 40x40.x NAW Ea U.S. Canada Dim. Sold in 4686Q Q 60x40x NAW Ea. 4686S S 60x40x NAW Ea U.S. Canada Dim. Sold in 4680Q 3-700Q 50x5x NAW Ea. 4680S 3-700S 50x5x NAW Ea U.S. Canada Dim. Sold in 4684Q Q 40x60x NAW Ea. 4684S S 40x60x NAW Ea U.S. Canada Dim. Sold in A 60x40x3 NAW Ea. 486S S 60x40x3 NAW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood Contact your local NAP GLADU representative for more information or to request a quotation.

103 NON-TURNABLE - HOLES Jonalloy Flat Bottom Inserts 80 U.S. Canada Dim. Sold in 469Q Q 80x5x NAW Ea. 469S S 80x5x NAW Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 103

104 NON-TURNABLE - 1 HOLE Jonalloy Beveled Bottom Inserts U.S. Canada Dim. Sold in 473Q Q 15x5x NAW Ea. 473S S 15x5x NAW Ea. 5 U.S. Canada Dim. Sold in 4740Q Q 5x30x NAW Ea. 4740S S 5x30x NAW Ea U.S. Canada Dim. Sold in 4734Q Q 0x5x NAW Ea. 4734S S 0x5x NAW Ea U.S. Canada Dim. Sold in A 5x35.4x NAW Ea. 4838S S 5x35.4x NAW Ea U.S. Canada Dim. Sold in 4840A Q 0x35x NAW Ea. 4840S S 0x35x NAW Ea. 30 U.S. Canada Dim. Sold in 4736Q Q 30x35x NAW Ea. 4736S S 30x35x NAW Ea. 104 Contact your local NAP GLADU representative for more information or to request a quotation.

105 NON-TURNABLE - 1 HOLE Jonalloy Beveled Bottom Inserts TURNABLE - HOLES U.S. Canada Dim. Sold in 4738Q Q 35x35x NAW Ea. 4738S S 35x35x NAW Ea U.S. Canada Dim. Sold in 4495Q 40x35x NW Ea. 4495S 40x35x NW Ea NON-TURNABLE - HOLES 40 U.S. Canada Dim. Sold in x5x NAW Ea. 4854S S 40x5x NAW Ea. 60 U.S. Canada Dim. Sold in 4360A 60x40x NW Ea. 4360S 60x40x NW Ea. 40 U.S. Canada Dim. Sold in 4001Q 40x40x NW Ea. 4001S 40x40x NW Ea. 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 105

106 Face Mount Inserts For Cutterheads U.S. Canada Dim. Sold in 530A 35x5x GP Ea. 530S 35x5x GP Ea U.S. Canada Dim. Sold in 539A 40x30x GP Ea. 539S 40x30x GP Ea U.S. Canada Dim. Sold in 531A 35x30x GP Ea. 531S 35x30x GP Ea U.S. Canada Dim. Sold in 5337A 50x5x GP Ea. 5337S 50x5x GP Ea U.S. Canada Dim. Sold in 538A 40x5x GP Ea. 538S 40x5x GP Ea. U.S. Canada Dim. Sold in 5344A 60x30x GP Ea. 5344S 60x30x GP Ea. S - Re-profiling NOTE: All drawings are true to size 1:1 and in face coming positions. CARBIDE GRADE: GP - General Purpose, MM - Man-Made, NW - Natural Wood, NAW - Non-Abrasive Wood, HNW - HI Natural Wood, SW - Soft Wood 106 Contact your local NAP GLADU representative for more information or to request a quotation.

107 3mm C'lock pin Backing Plates for Leuco Heads 3mm C'lock pin U.S. Part No. Canada Part No. Dimensions WxHxT 6175BPQ 1.571x1.04x U.S. Part No. Canada Part No. Dimensions WxHxT 6180BPQ.357x1.13x mm C'lock pin U.S. Part No. Canada Part No. Dimensions WxHxT 6601BPQ.357x1.65x U.S. Part No. Canada Part No. Dimensions WxHxT 6600BPQ.357x1.65x.34 Serrated Backing Plates 60 Degree corrugated back knife stock 60 Degree corrugated back knife stock U.S. Part No. Canada Part No. Dimensions WxHxT 6607BP.36x1.504x.5 U.S. Part No. Canada Part No. Dimensions WxHxT 6608BPQ 1.574x1.504x.5 1 locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 107

108 Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page B C A B EC D D D D Contact your local NAP GLADU representative for more information or to request a quotation.

109 Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page NP NP TJ TJ TJ TJ TJ TJ TJ TJ TJ TJ TJ BP TJ BP TJ TJ TJ TJ TJ TJ TJ TJ TJ TJ BP 111 TJ BP 111 TJ BP 111 TJ BP 111 TJ TJ TJ TJ INS TJ INS TJ INS TJ INS TJ INS TJ INS TJ INS TJ INS TJ INS TJ NP71 4 TJ NP76 4 TJ NP81 4 TJ NP86 4 TJ NP91 4 TJ NP96 4 TJ NP311 4 TJ NP316 4 TJ NP55 4 TJ NP553 4 TJ NP554 4 TJ locations coast-to-coast See all our products at: USA: (800) Fax: (800) sales@napgladu.com Toronto Canada: (888) Fax (416) info@napgladu.com / Montreal Canada: (800) (450) info@napgladu.com 109

110 Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page TJ3 58 TJ36 60 TJ451 6 TJ TJ TJ57 47 TJ6 58 TJ37 59 TJ454 6 TJ TJ TJ58 46 TJ9 58 TJ TJ TJ TJ TJ59 49 TJ3 58 TJ TJ457 6 TJ TJ TJ TJ35 58 TJ TJ TJ TJ TJ TJ38 58 TJ TJ461 6 TJ TJ TJ53 51 TJ41 58 TJ TJ464 6 TJ TJ TJ TJ311 6 TJ TJ TJ TJ51 5 TJ TJ TJ TJ467 6 TJ TJ TJ537 5 TJ TJ TJ TJ49 50 TJ TJ TJ33 63 TJ TJ TJ TJ TJ TJ36 63 TJ41 60 TJ47 46 TJ TJ TJ TJ39 63 TJ46 60 TJ TJ TJ TJ TJ33 63 TJ TJ TJ TJ TJ54 60 TJ TJ TJ TJ TJ50 55 TJ TJ TJ441 6 TJ TJ TJ51 60 TJ TJ TJ44 60 TJ TJ TJ5 46 TJ TJ TJ444 6 TJ TJ TJ53 48 TJ TJ TJ TJ479 5 TJ50 61 TJ54 49 TJ TJ TJ447 6 TJ TJ TJ55 50 TJ TJ TJ48 49 TJ TJ Contact your local NAP GLADU representative for more information or to request a quotation.

111 See all our products at:

CUTTER BLOCKS. Knives HSS & Carbide Tipped

CUTTER BLOCKS. Knives HSS & Carbide Tipped C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on