Base Units. Base Unit Coding

Size: px

Start display at page:

Download "Base Units. Base Unit Coding"

Ophelia Simon
6 years ago
Views:

1 18mm Specifications

2 Contents Base Units 3 Corner Base Units 6 Sink/Dummy Drawer-line Units 8 Broom & Larder Units 10 Appliance Housing Units 12 Oven Housing Units 13 Decore Panels 16 Base Unit Accessories 17 Wall Units 20 Wall Unit Accessories 22 Cornice & Pelmets 23 Premium Accessories 24 Worktops 26 Worktops & Breakfast Bars 28 Splashbacks & Upstands 29 Jointing Strips 30 Carcase Cubic Capacities (m 3 ) 31 Sinks 32 Taps 33 Tap Flow Rates 34

3 Base Units Rixonway standard base units are available in Full Height or Drawer-line door formats in both 500mm Space Saver and 600mm Standard depths. Units come 870mm high as standard (720mm + legs). A comprehensive range of cabinet sizes are available to ensure the best possible utilisation of available space in the kitchen. All Rixonway unit types conform to Public Sector performance standards including BS 6222, Part 2, Level H. Covered by the FIRA Gold Award which is recognised as being the highest award in the industry. The Rixonway manufacturing facility has also been assessed to meet the ISO 9001 Quality Assurance management standard and ISO Environmental management standard. Base Unit Coding Rixonway unit coding is composed of the following: Height + Width + Depth + Suffix + Handing Example 1: Forms the unit code 956DR Height (mm) Width (mm) Depth (mm) Suffix Handing legs Drawer-line Right D R Example 2: Forms the unit code 945FL Height (mm) Width (mm) Depth (mm) Suffix Handing legs Full Height Left F L Width Depth Height Doors on single hinge units can be hinged on the left or right. Please specify hinge handing when ordering by adding L or R at the end of the product code. Example: 956DR Right hand hinge. 956DL Left hand hinge. 3

Base Units Full Height Door* 2 Full Height Doors* Width (mm) C.C. (m 3 ) 933B 300 0.06 943B 400 0.08 300mm 953B 500 0.10 963B 600 0.13 983B 800 0.17 9103B 1000 0.

4 Base Units Full Height Door* 2 Full Height Doors* Width (mm) C.C. (m 3 ) 933B B mm 953B B B B *Add suffix L or R for hinge handing. Full Height Door* Drawer-line* Width (mm) C.C. (m 3 ) 935F 935D mm 600mm 945F 945D F 955D F 965D F 936D F 946D F 956D F 966D *Add suffix L or R for hinge handing. Not avaliable as a premium drawer box 4

Base Units 2 Full Height Doors 2 Drawers/Doors Width (mm) C.C. (m 3 ) 500mm 600mm 985F 985D 800 0.

35 Not avaliable as a premium drawer box 5 Drawer Pack Pan Drawer Pack Width (mm) C.C. (m 3 ) 935DP 300 0.

5 Base Units 2 Full Height Doors 2 Drawers/Doors Width (mm) C.C. (m 3 ) 500mm 600mm 985F 985D F 9105D F 986D F 9106D Not avaliable as a premium drawer box 5 Drawer Pack Pan Drawer Pack Width (mm) C.C. (m 3 ) 935DP mm 600mm 945DP DP 955MPD DP 965MPD DP DP DP 956MPD DP 966MPD MPD Not avaliable as a premium drawer box 5

6 Corner Base Units Rixonway offer a comprehensive range of Corner Base Units in both Full Height or Drawer-line door formats. Two main carcase sizes are available 800mm and 1000mm in length, and either 500mm Space Saver and 600mm Standard depths. Please specify the handing of the blanking panel when ordering by adding the suffix L or R to the unit code. Each unit is available with or without a corner post. With this variety there are many combinations of corner unit available to suit any design requirement. Panels and posts are supplied seperately. Below is a description of the coding system. Corner Base Unit Coding Corner Base Units are coded in the same way to ordinary base and wall units and are composed of: Height + Width + Depth + Description + Door Size + Blanking Panel + Handing Example 1: Forms the unit code 9106CD56R Height (mm) Width (mm) Depth (mm) Description Door Size (mm) Blanking Panel (mm) Handing legs Corner Drawer-line R CD 5 6 R Example 2: Forms the unit code 9106CF56NR (N indicates no corner post) Height (mm) Width (mm) Depth (mm) Description Door Size (mm) Blanking Panel (mm) Handing legs Corner Full Height R CF 5 6 NR Example 1 with Corner Post: 9106CD56R Example 2 without Corner Post: 9106CF56NR Void Void Blanking Panel Blanking Panel Corner Post 500 Drawer-line Door No Corner Post 500 Full Height Door 6

7 Corner Base Units 500mm Deep with 600mm Blanking Panel 600mm Deep with 600mm Blanking Panel Full Height Door* Drawer-line* Door Size (mm) Void (mm) Return (mm) Wall Length (mm) Width (mm) C.C. (m 3 ) 985CF36 985CD CF46 985CD CF56 985CD CF CD CF CD CF CD CF36 986CD CF46 986CD CF56 986CD CF CD CF CD CF CD *Add suffix L or R for hinge handing. Not avaliable as a premium drawer box L Shaped Corner Base Unit: Shelf Version* 962CF33SH L Shaped Corner Base Unit: Carousel Version* 962CF33CA Height (mm) legs Width (mm) Depth (mm) * Supplied in two pieces; one part rigid one part flatpack. NB Only available in Full Height doors. 18mm only. C.C. (m 3 )

Sink/Dummy Drawer-line Units Rixonway offer a comprehensive range of Sink/Dummy Drawer-line Units in both 500mm Space Saver and 600mm Standard depths.

Sink/Dummy Drawer-line Units can be used to house a variety of sinks, and also as a replacement for a Drawer-line Unit that is to be significantly reduced in width on-site.

8 Sink/Dummy Drawer-line Units Rixonway offer a comprehensive range of Sink/Dummy Drawer-line Units in both 500mm Space Saver and 600mm Standard depths. Please check that the unit you are specifying can accommodate the appropriate sink. Sink/Dummy Drawer-line Units can be used to house a variety of sinks, and also as a replacement for a Drawer-line Unit that is to be significantly reduced in width on-site. Dummy drawers are supplied pre-drilled for handle. Sink Base Units Dummy Drawer 1 Dummy Drawer* Width (mm) C.C. (m 3 ) 500mm 600mm 945SD** SD SD SD** SD SD *Add suffix L or R for hinge handing. ** Please check your sink dimensions are compatible with the 400mm unit. 1 Dummy Drawer 2 Dummy Drawers Width (mm) C.C. (m 3 ) 500mm 600mm 985SD* 985SDX SD* 9105SDX SDX SD* 9106SDX *Add suffix L or R to indicate working drawer. Not avaliable as a premium drawer box 8

9 Sink/Dummy Drawer-line Units Corner Sink Base Units 500mm Deep with 600mm Blanking Panel 600mm Deep with 600mm Blanking Panel Drawer-line* Door Size (mm) Void (mm) Return (mm) Wall Length (mm) Width (mm) C.C. (m 3 ) 985CDS CDS CDS CDS CDS CDS CDS CDS CDS CDS CDS CDS *Add suffix L or R for hinge handing. 9

10 Broom & Larder Units Rixonway offer a wide variety of Broom and Larder cupboards to suit any design requirement. They are available in three different heights, 1975mm (1825mm + Legs), 2120mm (1970mm + Legs) and 2250mm (2100mm + Legs), in both 500mm Space Saver and 600mm Standard widths and depths. Used within a kitchen layout they can significantly increase storage space or cubic capacity. Broom Units Broom Units* Height (mm) Width (mm) C.C. (m 3 ) 1955B B mm 600mm 2155B B B B B B B B B B B B *Add suffix L or R for hinge handing. 10

11 Broom & Larder Units Larder Units Tall Larder* Height (mm) Width (mm) C.C. (m 3 ) 1955L L mm 600mm 2155L L L L L L L L L L L L *Add suffix L or R for hinge handing. NB Tall Larder unit contains an additional shelf to the Tall Broom unit. Mid Height Larder 600mm Depth* Height (mm) Width (mm) C.C. (m 3 ) 1466L *Add suffix L or R for hinge handing. Pull Out Larder 600mm Depth* Height (mm) Width (mm) C.C. (m 3 ) 1936PL PL * Pull out Larder units and Larder units are not interchangeable. Unit supplied separately to doors and wirework. 11

12 Appliance Housing Units All appliances should be fitted strictly in accordance with the manufacturer s instructions. Tall Appliance Housing* 50/50 Height (mm) Width (mm) C.C. (m 3 )** 2166AH-A *Add suffix L or R for hinge handing. **C.C. (m 3 ) does not include appliance. Tall Appliance Housing* 70/30 Height (mm) Width (mm) C.C. (m 3 )** s 1966AH-B AH-B AH-B *Add suffix L or R for hinge handing. **C.C. (m 3 ) does not include appliance. Tall Appliance Housing* 60/40 Height (mm) Width (mm) C.C. (m 3 )** 2166AH-C *Add suffix L or R for hinge handing. **C.C. (m 3 ) does not include appliance. Boiler Housing* Height (mm) Width (mm) C.C. (m 3 )** 765BH BH BH *Unit supplied as flat pack. **C.C. (m 3 ) does not include appliance. Please note: a wide range of appliances are available, please contact sales for details. Drawings and fittings configuration should be provided at the point of order. 12

13 Oven Housing Units Base Oven Housing* 600 Aperture Height (mm) Width (mm) C.C. (m 3 )** 966OH *Supplied with a dummy drawer front fitted below the oven aperture. **C.C. (m 3 ) does not include oven. Mid Height Oven Housing* 600 Aperture Height (mm) Width (mm) C.C. (m 3 )** 1466OH-6B *Add suffix L or R for hinge handing. **C.C. (m 3 ) does not include oven. Mid Height Oven Housing 600 Aperture Height (mm) Width (mm) C.C. (m 3 )** 1466OH-6C **C.C. (m 3 ) does not include oven. Mid Height Oven Housing 900 Aperture Height (mm) Width (mm) C.C. (m 3 )** 1466OH-9D **C.C. (m 3 ) does not include oven. 13

14 Oven Housing Units Tall Oven Housing* 600 Aperture Height (mm) Width (mm) C.C. (m 3 )** s 1966OH-6A OH-6A OH-6A *Add suffix L or R for hinge handing. **C.C. (m 3 ) does not include oven. s Tall Oven Housing* 600 Aperture Tall Oven Housing* 900 Aperture Height (mm) Width (mm) C.C. (m 3 )** 1966OH-6B 1966OH-9B OH-6B 2166OH-9B OH-6B 2266OH-9B *Add suffix L or R for hinge handing. **C.C. (m 3 ) does not include oven. Tall Oven Housing* 600 Aperture Height (mm) Width (mm) C.C. (m 3 )** 1966OH-6E *Add suffix L or R for hinge handing. **C.C. (m 3 ) does not include oven. 14

15 Decor Panels Base End Panel Size (mm) Description Colours s BE COL* 900x600x18 BE MZCOL* 900x600x18 BE KOACOL 900x600x18 BE SOCOL* 900x600x18 BE MFCPLOK 900x600x18 BE PLOK 900x600x18 *Please specify colour when ordering. Trieste & Ascoli Base End / Framing Panel Monza, Estilo & Ancona Gloss Base End / Framing Panel Koa Gloss Base End / Framing Panel Portofino, Napoli & Sorrento Base End / Framing Panel Palermo (MFC) Base End / Framing Panel Palermo (Timber) Base End / Framing Panel Maple, Beech, Walnut, Rosewood, Elements, Oyster, Olive, White White, Burgundy, Black, Cream Walnut Beech, Maple, Walnut, Cream, White Oak Oak Wall End Panel Size (mm) Description Colours s WE COL* 900x300x18 WE MZCOL* 900x300x18 WE KOACOL 900x300x18 WE SOCOL* 900x300x18 WE MFCPLOK 900x300x18 WE PLOK 900x300x18 *Please specify colour when ordering. Trieste & Ascoli Wall End / Framing Panel Monza, Estilo & Ancona Gloss Wall End / Framing Panel Koa Gloss Wall End / Framing Panel Portofino, Napoli & Sorrento Wall End / Framing Panel Palermo (MFC) Wall End / Framing Panel Palermo (Timber) Wall End / Framing Panel Maple, Beech, Walnut, Rosewood, Elements, Oyster, Olive, White White, Burgundy, Black, Cream Walnut Beech, Maple, Walnut, Cream, White Oak Oak 15

16 Decor Panels Tall End Panel Size (mm) Description Colours TE COL* 2400x600x18 Trieste & Ascoli Tall End / Framing Panel Maple, Beech, Walnut, Rosewood, Elements, Oyster, Olive, White TE MZCOL* 2200x600x18 Monza, Estilo & Ancona Gloss Tall End / Framing Panel White, Burgundy, Black, Cream s TE KOWA 2200x600x18 Koa Gloss Tall End / Framing Panel Walnut TE SOCOL* 2200x600x18 Portofino, Napoli & Sorrento Tall End / Framing Panel Beech, Maple, Walnut, Cream, White TE MFCPLOK 2400x600x18 Palermo (MFC) Tall End / Framing Panel Oak TE PLOK 2400x600x18 *Please specify colour when ordering. Palermo (Timber) Tall End / Framing Panel Oak Showback Panel* Size (mm) Description Colours s BB COL 2000x900x18 Showback Panel BB COL 2500x900x18 Showback Panel Maple, Beech, Walnut, Rosewood, Elements, Oyster, Olive, White Maple, Beech, Walnut, Rosewood, Elements, Oyster, Olive, White BB MZCOL 2000x900x18 Showback Panel BB KOACOL 2000x900x18 Showback Panel *Please specify colour when ordering. Grain will run horizontally on this size of panel. 16

17 Base Unit Accessories A wide variety of accessories are available to complement each of Rixonway s kitchen ranges. Shown for illustration only Quad Base End* Size (mm) 936QO 300w x 600d *Please specify colour when ordering** Tray Space* Size (mm) 936TS 300w x 600d *Please specify colour when ordering** 933BWR Base Wine Rack* Size (mm) 300w x 720h *Please specify colour when ordering** Style shown is for foil wrapped doors only, for MFC styles please see page 22. Wire Wine Rack* Width (mm) N o of Bottles GAC *For use in 300mm unit. Eco Bin* Size GAC L (3 x 10L) *For use in 300mm wide unit or larger. Waste Bin* Installed Height (mm) GAC * For use with 110 hinge on 400, 500 & 600mm door only. Bin size: 12L **COL = Beech, Maple, Walnut, Elements, Rosewood, Oyster or White. 17

18 Base Unit Accessories GAC0203 Three Quarter Carousel* Colour Cream-White * Plastic 3/4 carousel for use in 925mm L shape corner base unit. Wire Half Carousel Set* Size (mm) GAC w x 380d * For use in 1000 x 600mm unit with 500 or 600mm door. GAC0206 GAC0207 GAC0208 GAC0209 Pull Out Wire Basket Set* Description For use in 600mm base unit For use in 500mm base unit For use in 400mm base unit For use in 300mm base unit *Set consist of: 2 x Storage baskets. 2 x Sets of full extension runners. Aluminium Towel Rail Installed Length (mm) Extension Length (mm) GAC mm 533mm Stainless Steel Effect Leg Size (mm) GAC w x 60d DRW0610 DRW0611 Cutlery Tray* Size (mm) 433w x 380d 533w x 380d * DRW0610 for use in 500mm wide drawer. DRW0611 for use in 600mm wide drawer. 18

19 Base Unit Accessories Width Depth Brushed Steel Foil Wrapped Frame with Glass* Size (mm) Glass Type DRS h x 396w Clear DRS h x 496w Clear DRS h x 596w Clear DRS h x 396w Frosted DRS h x 496w Frosted DRS h x 596w Frosted * Clear glass is toughened therefore can be used on base and wall units. Frosted glass is not toughened therefore, for safety reasons, must only be used on wall units. Doors are not supplied pre-drilled for the handle. Drip Tray* Width (mm) Depth (mm) GAC GAC GAC GAC * The purpose of the Drip Tray is to protect the base of the sink unit from sink leakages or product leakages such as bleach, detergents etc, which are often stored under sink units. Right hand door Pull Out Corner Unit* Installed Height (mm) Built-in Depth (mm) GAC GAC *GAC For use in 1000 x 600mm unit with 500 or 600mm right hand door. *GAC For use in 1000 x 600mm unit with 500 or 600mm left hand door. 19

20 Wall Units Rixonway offer a wide variety of Wall Units to suit any design requirement. Wall Units are available in three heights 575mm, 720mm and 900mm. Single Door Wall Unit* Height (mm) Width (mm) C.C. (m 3 ) 633W W W W W s 743W W W W** W** W** W** *Add suffix L or R for hinge handing. **Comes with two shelves. Double Door Wall Unit Height (mm) Width (mm) C.C. (m 3 ) 683W W s 783W W W** W** **Comes with two shelves. 20

21 Wall Units Corner Wall Unit* Height (mm) Width (mm) C.C. (m 3 ) 663CW CW CW *Add suffix L or R for handing of blanking panel. Glass Wall Unit* Height (mm) Width (mm) C.C. (m 3 ) 753GF *Add suffix L or R for hinge handing. Selected ranges only and will be supplied as 18mm carcase only. Not available in Trieste. Please specify if you require a glass shelf. L Shaped Corner Wall Unit* Height (mm) Width (mm) Depth (mm) C.C. (m 3 ) 762CW *Supplied in two pieces; one part rigid one part flatpack. 18mm only. Over Hob Box Height (mm) Width (mm) C.C. (m 3 ) 263OH OH

Wall End Shelves* Size (mm) 633QO 575h x 300w 733QO 720h x 300w 933QO 900h x 300w *Please specify colour when ordering** Base or Wall Unit Wine

22 Wall Unit Accessories A wide variety of wall unit accessories are available to complement any kitchen range. Please check for colour co-ordination. Wall End Shelves* Size (mm) 633QO 575h x 300w 733QO 720h x 300w 933QO 900h x 300w *Please specify colour when ordering** Base or Wall Unit Wine Rack* Size (mm) 7153WR 720h x 150w *Please specify colour when ordering** Supplied in Melamine Faced Chipboard (MFC). Foil Wrapped Door Wine Rack* Size (mm) 733WWR 720h x 300w *Please specify colour when ordering** **COL = Beech, Maple, Walnut, Elements, Rosewood, Oyster or White. 22

23 Cornice & Pelmets Traditional Cornice Traditional Pelmet Colour Length (mm) Depth (mm) MDF0202 MDF0302 Cream MDF0205 MDF0305 White s MDF0207 MDF0307 Maple MDF0209 MDF0309 Beech MDF0210 MDF0310 Rosewood MDF0212 MDF0312 Elements MDF0271 MDF0371 Oak MDF0202 MDF0205 MDF0207 MDF0209 MDF0210 MDF0212 MDF0302 MDF0305 MDF0307 MDF0309 MDF0310 MDF0312 MDF0271 MDF0371 Bullnose Cornice/Pelmet Colour Length (mm) Depth (mm) MDF0101 White MDF0102 Cream MDF0103 Maple MDF0107 Walnut* s MDF0109 Beech MDF0110 Rosewood MDF0112 Elements MDF0115 Walnut** MDF0150 Oyster MDF0152 Olive *MDF0107 is for use on units with Portofino or Napoli Walnut frontals only. **MDF0115 is for use on units with Trieste Walnut frontals only. Square Edge Cornice/Pelmet Colour Length (mm) Depth (mm) MDF0154 Gloss White s MDF0159 Gloss Black MDF0160 Gloss Cream MDF0161 Gloss Burgundy MDF0162 Gloss Walnut

drawer runners for InnoTech, left and right 1 x Steel rear panel For use in 570mm deep units only.

24 Premium Accessories A wide variety of premium accessories are available to complement any kitchen range. Premium Soft Close Drawer* Width (mm) DRW DRW DRW DRW DRW * Set consists of: 2 x InnoTech drawer, left and right 2 x Front connectors 2 x Cover cap 2 x Quadro drawer runners for InnoTech, left and right 1 x Steel rear panel For use in 570mm deep units only. Premium Soft Close Pan Drawer* Width (mm) DRW DRW DRW *Set consists of: 2 x InnoTech drawer, left and right 2 x Front connectors 2 x Cover cap 2 x Quadro drawer runners for InnoTech, left and right 2 x Front connector for lengthwise railings 2 x Lengthwise railing 1 x Steel rear panel. For use in 570mm deep units only. Premium Drawer Storage* 24 For drawer width (mm) Number of flags DRW /600 4 DRW Pan Dawer *Set consist of: 2 x Fascia profiles, left and right Perforated profiles Flags with pre-mounted thread pin 5

25 Premium Accessories 215mm 315mm 415mm 515mm 715mm Premium Cutlery Tray* Size (mm) For drawer width (mm) DRW w x 462d 300 DRW w x 462d 400 DRW w x 462d 500 DRW w x 462d 600 DRW w x 462d 800 * Organisation can be tailored to personal needs using variable dividers, sets contain two divider elements per row. KHIN1503* HIN2002** HIN2001 HIN Premium Hinge Premium Hinge Plate Premium Soft Close Hinge Description Premium hinge kit. Consists of 2 x hinge, 2 x hinge plate and 2 x spacer. 110 Premium hinge. Premium hinge plate, 1.5mm distance. *Spacer only required for 15mm door. ** Integrated overlay adjustment + 2mm / - 2mm. Integrated depth adjustment + 3mm / - 2mm. Hinge adjustment at mounting plate. Premium hinge spacer, 2.7mm thinkness. For reducing drill hole depth in thin or highly softened doors. 25

26 Worktops Worktop Mitres Factory Cut Mason Mitres Rixonway can offer the facility of factory-applied Mason Mitre joints to Bull Nosed Worktops. In corner situations it is advisable that the joint be supported by the front rail of the corner base to allow access to the mason mitre bolts. Factory cut mitres are only recommended where wall corners are close to 90. If Mason Mitres are required, it is important that all dimensions be checked prior to order. Note: Each Male Mitre requires an extra 25mm of worktop. L Shaped Kitchens Female Male Female Male 575mm 2000mm 1425mm mm 1 When working out worktops in an L Shaped Kitchen, the easiest way to calculate worktops 1 and 2 is: mm = RH Female Mitre 2000mm - 575mm = 1425mm = LH Male Mitre Note: Because only one end of each piece is mitred, tolerance can still be added to each worktop. 26

27 Worktops U Shaped Kitchens Female Male Female Female Male Male Female Male 3600mm 3025mm 575mm 575mm mm 1225mm mm When working out worktops in a U shaped kitchen, the easiest way to calculate each of the worktops is: mm 575mm = 1225mm RH Male Mitre 3600mm 575mm = 3025mm LH Female RH Male Mitre 1600mm = LH Female Mitre Note: Tolerance may still be added to worktops that are mitred at one end only. Care must be taken with worktops that are mitred at both ends and therefore will be deadsized. Please note; Worktops (wall to wall) with two female mitres are difficult to fit. 27

28 Worktops & Breakfast Bars Rixonway Bull Nosed Worktops are manufactured from laminates bonded to 30mm or 40mm chipboard to BS EN 312 Type P2 in lengths up to 4100mm. Improved moisture resistant chipboard to BS EN 312 P3 in 30mm and 40mm depths are available up to 3000mm. Our Bull Nosed Worktop range has received the FIRA Gold Award for Product Excellence. A wide variety of finishes are available, please check current brochure for selection. Worktops are available in Single Bull Nosed from 300mm 750mm depths. Double Bull Nosed Worktops/Breakfast Bars are available in 665mm or 900mm depths only. Single Bull Nose Worktops Standard 500mm 600mm Thickness (mm) s WT30BN500* WT30BN600* 30 WT40BN500** WT40BN * Not available in Premium and Quartz. **Not available in Quartz. Moisture Resistant* 500mm 600mm Thickness (mm) s WT30CBN500 WT30CBN WT40CBN500 WT40CBN * Moisture Resistant (MR), available in selected ranges only, please see brochure for details. Tilesave Size (mm) Description JNT x 30 The Tilesave is an aluminium strip that is fitted between the worktop and wall tiles to reduce the risk of tile damage when the worktop is removed. This can be used on both 30mm and 40mm worktops. Double Bull Nose Worktops/Breakfast Bars 665mm 900mm Thickness (mm) WT40DBN665* WT40DBN900* 40 *Not available in Premium and Quartz. Breakfast Bars are not available in Moisture Resistant (MR) board. 28

29 Splashbacks & Upstands Range Splashbacks Upstands Colour Size: 3030 x 600mm Size: 3000 x 100 x 20mm Dakota SPL0102 UPS0102 Aticos Gold SPL0117 UPS0117 Maryland Fonce Slate SPL0106 UPS0106 Maryland Clair Grey SPL0108 UPS0108 Aztec Granite SPL0110 UPS0110 Beige Granite SPL0103 UPS0103 Nordic Beech SPL0142 UPS0142 Noir SPL0131 UPS0131 Ebony Stripwood SPL0132 UPS0132 Black Quartz SPL0133 UPS0133 White Quartz SPL0134 UPS

30 Jointing Strips Worktop Corner Joint 600mm Thickness (mm) Colour JNT Silver JNT Silver JNT Black Worktop Corner Joint 900mm Thickness (mm) Colour JNT Silver JNT Silver JNT Black To join worktop to worktop in L shape. Worktop Straight Joint 600mm Thickness (mm) Colour JNT Silver JNT Silver JNT Black Worktop Straight Joint 900mm Thickness (mm) Colour JNT Silver JNT Silver JNT Black To join worktops end-to-end to extend worktop length. Worktop End Cap 600mm Thickness (mm) Colour JNT Silver JNT Silver JNT Black Worktop End Cap 900mm Thickness (mm) Colour JNT Silver JNT Silver JNT Black To cap the end of a worktop run typically fitted next to free standing cookers. Worktop to Sinktop 600mm Thickness (mm) Colour JNT Silver JNT Silver JNT Black To join worktop to sit on sinktop in corner situations. 30

31 Carcase Cubic Capacities (m 3 ) Base Unit Wall Unit Description Depth/Height (mm) Width (mm) Deep Deep High High High Larder 1320 Mid 600 Deep 0.35 Broom & Larder 1975 Tall Broom & Larder 2120 Tall Broom & Larder 2250 Tall Over Hob Box 500 Deep Deep Deep Deep Deep Deep High High 0.05 Oven Housing 870 Tall* 600 Deep Oven Housing 1320 Mid* 600 Deep 0.35 Oven Housing 1975 Tall* 600 Deep 0.52 Oven Housing 2120 Tall* 600 Deep 0.56 Oven Housing 2250 Tall* 600 Deep 0.60 Appliance Housing 1975 Tall* 600 Deep 0.52 Appliance Housing 2120 Tall* 600 Deep 0.56 Appliance Housing 2250 Tall* 600 Deep 0.60 *These are sold without appliances. 31

32 Sinks Euroline Width x Depth (mm) Handing Type Style Finish s SNK x 508 Rev Inset Polished SNK x 508 Rev Inset Polished SNK x 435 Rev Inset Bright Contract Width x Depth (mm) Handing Type Style Finish SNK x 500 Left Sit On Roll Front Bright SNK x 500 Right Sit On Roll Front Bright SNK x 600 Left Sit On Roll Front Bright s SNK x 600 Right Sit On Roll Front Bright SNK0805* 1000 x 500 Left Sit On Roll Front Bright SNK0806* 1000 x 500 Right Sit On Roll Front Bright SNK x 600 Left Sit On Roll Front Bright SNK x 600 Right Sit On Roll Front Bright Lexin Width x Depth (mm) Handing Type Style Finish SNK x 508 Left Inset Bright s SNK x 508 Right Inset Bright SNK0811* 950 x 508 Left Inset Bright SNK0812* 950 x 508 Right Inset Bright Linear Width x Depth (mm) Handing Type Style Finish SNK x 510 Rev Inset Polished 1.5 Sink Waste SNK0303 *Compliant with old British Standard BS

33 Taps Range Style Tap Holes Finish WRAS Number Performa Cross Head Pillar TAP0128* Cross Head 2 Chrome N/A (BS 1010) Cross Head High Neck Pillar TAP0109* Cross Head 2 Chrome Souvenir Pillar TAP0118* Cross Head 2 Chrome High Neck Lever TAP0110* Lever Head 2 Chrome N/A (BS 1010) High Neck Quarter Turn Lever TAP0114* Lever Head 2 Chrome Leger Pillar TAP0117* Lever Head 2 Chrome High Neck Pillar TAP0102* Dome Head 2 Chrome Polo High Neck Pillar TAP0116* Dome Head 2 Chrome Chrome Aquaclassic TAP0121** Cross Head 1 Chrome Chrome Aquadisc TAP0120** Lever Head 1 Chrome Chrome Quarter Turn TAP0115* Lever Head 2 Chrome Leger Lever Deck TAP0125* Lever Head 2 Chrome Leger Deck TAP0122* Lever Head 2 Chrome Mono Lever TAP0108** Lever Head 1 Chrome Chrome Monobloc TAP0103** Dome Head 1 Chrome Mercia Modern Deck TAP0124* Dome Head 2 Chrome Polo Deck TAP0112* Dome Head 2 Chrome Modena TAP0203** Lever Head 1 Chrome * Compatible with the following Sinks: SNK0205, SNK0206, SNK0207, SNK0208, SNK0211, SNK0212, SNK0805, SNK0806, SNK0807, SNK0808, SNK0811 and SNK0812. **Compatible with the following Sinks: SNK0218, SNK0226, SNK0232 and SNK

34 Tap Flow Rates Range 0.2 bar 0.3 bar 0.5 bar 1.0 bar Performa Cross Head Pillar TAP Cross Head High Neck Pillar TAP Souvenir Pillar TAP High Neck Lever TAP0110 High Neck Quarter Turn Lever TAP Leger Pillar TAP High Neck Pillar TAP Polo High Neck Pillar TAP Chrome Aquaclassic TAP Chrome Aquadisc TAP Chrome Quarter Turn TAP0115 Leger Lever Deck TAP Leger Deck TAP Mono Lever TAP Chrome Monobloc TAP Mercia Modern Deck TAP0124 Polo Deck TAP Modena TAP

36 Rixonway Kitchens Ltd Shaw Cross Business Park Dewsbury WF12 7RD Tel: Fax: Samples of products shown are intended to indicate general appearance only. Colour representation is as accurate as possible using printing processes. 03/16V25

Kitchen Installation Manual

Kitchen Installation Manual June 2018 www.howdens.com 2 www.howdens.com Section pages Introduction... page 4 Supplied products... page 4 Guide - Hints and tips... page 5 Cabinet installation fittings...