EML17 LED. Munich Pendant. Ordering Guide: EML17 LED

Size: px

Start display at page:

Download "EML17 LED. Munich Pendant. Ordering Guide: EML17 LED"

Jacob Garey Glenn
6 years ago
Views:

EML17 LED Munich Pendant CATALOG # Project Type This European shaped pendant or wall mount luminaire consists of a driver housing and skirt with an internal light engine with a choice of two lens

1 EML17 LED Munich Pendant CATALOG # Project Type This European shaped pendant or wall mount luminaire consists of a driver housing and skirt with an internal light engine with a choice of two lens options. Choice of a fl at or sag glass lens Stainless steel hardware Driver and Light engine assembly mount on a removable assembly plate and are furnished with quickdisconnect plugs for ease of installation and maintenance CSA listed and labeled as suitable for wet locations TGIC powder coat fi nish Mounts via swivel nipple to the Urban 4" or 5 diameter arms (specify PNIP3 option when ordering 5 arm); see arm specifi cation sheets for details on mounting options. Max EPA: 0.86 sq feet Max Height: 19-1/2 (49.5cm) Max Width: 17 (43.2cm) Max Weight: 45 lbs (20.4 kg) Listing: CSA listed for wet locations Sample Catalog number: EML17 ST Fixture Base 49LED 350MA Source & Wattage 3K Color Temp GCF Lens Option MVOLT Voltage R3 Distrib. SF Options DBL Finish Ordering Guide: Fixture Base Source & Wattage Color Temp Lens Option Voltage Distribution Options Finish EML17 ST RT FT 49LED 350MA 49LED 525MA 63LED 350MA 63LED 525MA 3K 4K 5K GCF GCSG MVOLT R2 R3 R4 R5 SF DF SPD DBL DDB DNA DWH CS CM ANBK ANDB ANDG ANVG Data is considered accurate as of the revision date shown. Antique Street Lamps reserves the right to modify specifi cations without notice. EML17 LED Antique Street Lamps 3825 Columbus Road Granville, OH Phone: Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 6/14

2 Base ST RT FT Smooth Ringed Fluted ST Smooth Ballast Housing RT Ringed Ballast Housing FT Fluted Ballast Housing Notes: Must select ST, RT, or FT style; optional 1DS feature can be specified in addition to any selection (ex: EHL16 GCF ST 1DS) Source and Wattage Select Your Choice From 63LED light engine module Performance Package Lens Type 63LED 350mA GCSG Dist. Input Watts R3 R4 R5 3000K CCT (opt) 49LED 350MA 49 chips, 350 ma 49LED 525MA 49 chips, 525 ma 63LED 350MA 63 chips, 350 ma 63LED 525MA 63 chips, 525 ma 4000K CCT (opt) 5000K CCT (opt) L70 Life (hrs) Delivered Lumens Efficacy (LPW) CRI Delivered Lumens Efficacy (LPW) CRI Delivered Lumens Efficacy (LPW) 25 C Data is considered accurate as of the revision date, shown in the highest operating temperature available. Antique Street Lamps reserves the right to modify specifications without notice. Color Temp 3K 3000K 4K 4000K 5K 5000K Lens Option 17 (43.2cm) 17 (43.2cm) GCF Glass, Clear Flat (Standard) GCSG Glass, Clear Sag 17 (43.2cm) 17 (43.2cm) Notes: Nighttime Friendly distributions available with GCF lens only. GCF GCSG Glass, Clear Flat Glass, Clear Sag EML17 LED Antique Street Lamps 3825 Columbus Road Granville, OH Phone: Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 6/14

3 Voltage MVOLT MVOLT 120V 208V 240V 277V 347V 480V Distribution House Side Street Side R2 Type II R3 Type III R2 Type II Distributes light slightly ahead of luminaire location with signifi cant lateral spread. R3 Type III Provides light farther ahead of the luminaire than a Type II pattern but maintains a signifi cant lateral spread. R4 Type IV Sharp Cutoff Distributes light almost exclusively forward with an emphasis on eliminating light trespass and spill light behind the pole. R5 Type V Provides improved uniformity with a variance of the Type V distribution with a slightly square pattern compared to the regular Type V. R4 R5 Type IV Type V Options (Fuse Not Included) SF Single Fuse DF SPD Double Fuse Surge Protection Device Finish The luminaire has a powder coat fi nish utilizing a premium TGIC polyester powder. The fi nish is a three-stage process which consists of drying, powder application and curing. Before coating, the parts are treated with a fi vestage pretreatment process, consisting of a heated alkaline cleaner, rinse, phosphate coating, rinse and sealant. For a complete listing of colors, visit: DBL Black DDB Dark Bronze DNA Natural Aluminum DWH White Notes: Consult factory for CM option. CS CM ANBK ANDB Custom Select (RAL colors) Custom Match ASL Black ASL Dark Bronze Data is considered accurate as of the revision date shown. Antique Street Lamps reserves the right to modify specifi cations without notice. ANDG ANVG ASL Dark Green ASL Verde Green Refer to website EML17 LED Antique Street Lamps 3825 Columbus Road Granville, OH Phone: Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 6/14

4 6.0" 2.5" 18.5" 3.5" 4" x 8" Wall Bracket Mounting Plate (4) 1/2"Ø Holes EAA4WB eurotique Arms EAA Series 4" dia. Arms & Wall Bracket 32.5" CONSTRUCTION The arms and wall bracket shall be one-piece construction. The round tubing arms shall be welded to a center spool and plumbizer housing. For the wall bracket, the arm shall be welded to a flat wall plate. All welding shall be per ANSI/AWS D1.2. All welders shall be certified. MATERIALS The finials, plumb housing and swivel nipple shall be cast aluminum. The arm, center spool, arm spools and wall bracket mounting plate shall be aluminum. All hardware shall be stainless steel. All exterior hardware shall be tamper resistant. INSTALLATION The arms shall slip-fit a 3.375" O.D. x 11" post top tenon and attach with (8) socket set screws. Matching Eurotique poles shall be 4" diameter or 4"/6.63" diameter. The center finial and arm finial shall be removable. The wall bracket shall have four 1/2 dia. holes for mounting to the wall. (Bracket mounting hardware furnished by others. 2" x 3" vertical junction box recommended) Both arms and wall bracket shall have a plumbizer housing for luminaire mounting. Optional twist-lock photocontrol installed at center spool top instead of finial. 19" 4"Ø For finish specifications and color options, see Finish section in catalog. 20" EAA4/1 ORDERING INFORMATION Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line. Example: EAA4/1 ANBK PER PE1 Series EAA4WB EAA4/1 EAA4/2 one one two # of Luminaires required Finish 1 ANBK Black ANDB Dark Bronze ANDG Dark Green ANVG Verde Green ANPP Prime Painted CM Custom Match CS Custom Select RAL colors Options 2 PER NEMA Twist-Lock Receptacle only PE1 NEMA Twist-Lock Photocontrol 120,208,240V PE3 NEMA Twist-Lock Photocontrol 347V PE4 NEMA Twist-Lock Photocontrol 480V PE7 NEMA Twist-Lock Photocontrol 277V NOTES: 1. For finish specifications and color options, see "Finish" section in catalog. 2. Twist-Lock Photocontrol not available with wall bracket. 40" EAA4/2 ANTIQUE Street Lamps 2011-B W. Rundberg Ln. Austin, TX Ph (512) Fax (512) EA-1

5 eurotique Aluminum poles 4"Ø 10' - 18' tall DESCRIPTION The lighting poles shall be one-piece all aluminum construction with a two-piece base cover. The poles shall have a straight shaft with integral anchor/base plate. All welding shall be per ANSI/AWS D1.2. All welders shall be certified. The poles shall be Antique Street Lamps catalog number EPAX XX S4 finish. 16' 18' MATERIALS The poles shall be extruded aluminum with cast aluminum anchor plate, base cover and handhole cover. All exposed hardware shall be tamper resistant stainless steel. Anchor bolts to be completely hotdip galvanized. Partially galvanized bolts are not acceptable. 12' 14' DIMENSIONS The poles shall be X -XX" in height with a 10.5" diameter base cover. An integral 3.375" O.D. x 11" tenon shall be provided at the top for mounting Eurotique 4" arms (exceptions following). A 3.375" O.D. x 8" tenon shall be provided when mounting Eurotique arm EAL4. No tenon shall be provided at the top when mounting Eurotique arm EAK4 which has an internal tenon. 10' INSTALLATION The one-piece poles shall be provided with four.75" diameter by 24" long, L-type anchor bolts to be installed on a 7" diameter bolt circle. A handhole with cover shall be provided in the lower shaft section for wiring access. A grounding screw shall be provided inside the handhole. Eight set screws shall be provided at the top when mounting Eurotique arm EAK4. For finish specifications and color options, see Finish section in catalog. eurotique Architectural Lighting EPAX 10 S4 finish EPAX 12 S4 finish EPAX 14 S4 finish EPAX 16 S4 finish EPAX 18 S4 finish ANTIQUE Street Lamps 2011-B W. Rundberg Ln. Austin, TX Ph (512) Fax (512) EP-1

6 EUROTIQUE Aluminum poles 4"Ø 10' - 18' tall ORDERING INFORMATION Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line. Example: EPAX 12 S4 3-3/8T11 ANPP Options 3.375"O.D. x 11" High Tenon 3-3/8T11 (standard) 3.375"O.D. x 8" High Tenon 3-3/8T8 (Required for Eurotique Arm EAL4) Pole Series EPAX EUROTIQUE Poles Aluminum S4 3-3/8T11 3-3/8T8 0T0 Shaft Type 4" dia. shaft Tenon Height Standard Tenon Tenon for Arm EAL4 Tenon for Arm EAK4 ANBK ANDB ANDG ANVG ANPP CM CS Finish 1 Black Dark Bronze Dark Green Verde Green Prime Painted Custom Match Custom Select RAL colors Options Receptacles Flagpole Holders (see Accessories section in the catalog or contact Antique Street Lamps) NOTES: 1. For finish specifications and color options, see Finish section in catalog or contact Antique Steet Lamps. Internal Tenon - 0T0 (Required for Eurotique Arm EAK4, furnished with (8) set screws) 4"Ø ANCHORAGE GUIDE Pole Height 7" Dia. Bolt Circle " " Dia. Base 2" x 4" Handhole Opening with Door and (2) Socket Hd. Screws Handhole Cast Alum. Two- Piece Base Cover 18" (2) Socket Hd. Screws 4" 3.5" ANTIQUE Street Lamps 10.5"Ø leveling height 2011-B W. Rundberg Ln. Austin, TX Ph (512) Fax (512) leveling height 3/4"Ø Hot-Dip Galvanized Anchor Bolts (4 per pole) EP-2

7 Catalog Number EPAX 12 S4 DNA MP3138C FG-S DNA Type: Notes: POLE Eurotique CA Extruded Post [EPAX 12 S4 DNA MP3138C] Prefix: EPAX Height: 12 Feet (Actual Height: 12'-0") Shaft Style: 4 inch diameter smooth.25 wall Anchorage: Anchor Bolts Tenon: For Use With Clamp On Arms Finish: Lithonia Natural Aluminum Eurotique Cast Aluminum Extruded Post ACCESSORY Weatherproof Receptacle; Height Mounted at 11'-6" [FG-S DNA] Receptacle Type: Receptacle in Shaft GFI With Weather Proof Cover Finish: Lithonia Natural Aluminum Anchorage/Orientation Plan Hand Hole is at 0 deg. Customer Approval: signature date Job Name: City of Boise Standard Client Name: City of Boise Created By: Dennis Macho Date: 18-Mar-16 Catalog #EPAX 12 S4 DNA MP3138C FG-S DNA Dwg. # ASL Page: 2 of 3

8 ORIENTATION DRAWING The hand hole is located at zero (0) degrees. Height from bottom of base / anchor plate. Post EPAX 12 S4 DNA MP3138C Height 12'-0" Customer Approval: signature date Job Name: City of Boise Standard Client Name: City of Boise Created By: Dennis Macho Date: 18-Mar-16 Catalog #EPAX 12 S4 DNA MP3138C FG-S DNA Dwg. # ASL Page: 3 of 3

9 Ground Fault Circuit Interrupter Receptacles. Test/Reset buttons on face of receptacles. All Cast Aluminum Covers. Not Plastic. (Paintable to match post color). Weatherproof While-in-Use covers in two sizes. Weatherproof Receptacles External, Post Shaft Location External receptacles are typically installed above pedestrian level for special event uses and decorative seasonal lighting. Post Shaft Receptacle with Wet Location While Closed Cover Catalog part # FG-S Duplex Receptacle with Ground Fault Interrupter 3/4" 2 7/8" 4 1/2" A 20 amp, 125 volt, ground fault circuit interrupter duplex receptacle shall be mounted in the post. The receptacle shall be UL Listed according to E and UL 943 Class A and UL 498. The receptacle shall have a cast aluminum, UL Listed cover that is suitable for wet locations while not in use. The receptacle and cover shall mount to an outlet opening, in the post shaft, with a gasket and stainless steel screws. Wet Location when closed Cover Receptacle with Small, In-Use Wet Location Cover 2 3/8" Duplex Receptacle with Ground Fault Interrupter Small, Wet Location while in use Cover (for use with two 3/8" max. dia. cords) 3 3/8" LIFT OPEN 5 3/4" Catalog part # FGIUS-S A 20 amp, 125 volt, ground fault circuit interrupter duplex receptacle shall be mounted in the post. The receptacle shall be UL Listed according to E and UL 943 Class A and UL 498. The receptacle shall have a cast aluminum, lockable, UL Listed cover that is suitable for wet locations while in use and complies with NEC Article (b). The cover shall accept most common cord sets up to 3/8 diameter (14/3). The receptacle and cover shall mount to an outlet opening, in the post shaft, with a gasket and stainless steel screws. Receptacle with Large, In-Use Wet Location Cover 3 3/8" Duplex Receptacle with Ground Fault Interrupter Large, Wet Location while in use Cover (for use with two 1/2" max. dia. cords) 3 3/8" LIFT OPEN 5 3/4" Catalog part # FGIUL-S A 20 amp, 125 volt, ground fault circuit interrupter duplex receptacle shall be mounted in the post. The receptacle shall be UL Listed according to E and UL 943 Class A and UL 498. The receptacle shall have a cast aluminum, lockable, UL Listed cover that is suitable for wet locations while in use and complies with NEC Article (b). The cover shall accept most common cord sets up to 1/2 diameter (12/3). The receptacle and cover shall mount to an outlet opening, in the post shaft, with a gasket and stainless steel screws. ANTIQUE Street Lamps 2011-B W. Rundberg Ln. Austin, TX ph(512) fax(512) For information on specifying orientation and mounting heights see Orientation Guide in the back of the Accessories section in the catalog. A-10

EUROTIQUE LED. Architectural Site & Roadway Lighting

EUROTIQUE LED. Architectural Site & Roadway Lighting EUROTIQUE LED Architectural Site & Roadway Lighting EUROTIQUE LED New LED offering combines performance with style! Eurotique offers superior nighttime performance without jeopardizing the architectural