MOULDINGS Q U A L I T Y P R O D U C E D W I T H P R I D E

Size: px

Start display at page:

Download "MOULDINGS Q U A L I T Y P R O D U C E D W I T H P R I D E"

Harold Francis
6 years ago
Views:

1 Timber MOULDINGS Q U A L I T Y P R O D U C E D W I T H P R I D E

2 PurePine Radiata Decorative Profiles 1 Mouldings are available in fingerjointed radiata, radiata clears, untreated/h3.1 treated, unprimed/primed, white 2 Fingerjointed mouldings are manufactured in 5.4m lengths, door jambs in 4.2m lengths. Preprimed treated weatherboards and fascia in 6.0m lengths 3 Clear radiata mouldings or profiles are supplied in random lengths only Important Notice to all our Customers All our product is supplied kiln dried to an average % moisture content at the time of dispatch. Merchants and end users must ensure that care is taken to maintain the product in a dry environment at all times. Moisture uptake is easily detected by swelling between the joints in finger jointing and raised grain in finger jointing and clear profiles. We do not warranty product that has become wet or damp for any reason, and is showing defects to the finished surface as described above. A dry storage environment is also required for treated preprimed product. Primer coats are not designed as a sealer coat but simply as a holding coat. So remember - always store all PurePine Radiata Decorative Profiles out of the weather! Always store well supported either vertical or horizontal, and keep off the ground or floor. 1

3 General Information 1 Mouldings are available in fingerjointed radiata and radiata clears. 2 Fingerjointed mouldings are 5.4m lengths. Pre-primed weatherboards and fascias are 6.0m lengths. 3 We accept with pleasure orders and enquiries for non-standard profiles. Such orders and enquiries will be by quotation only and cannot be cancelled or returned once the order is confirmed. 4 All radiata and fingerjointed profiles are available in H3.1 (treated) specification if required. 5 Always store PurePine profiles out of the weather. This includes pre-primed products. Always store well supported either vertical or horizontal and keep off the ground or the floor. Always handle with care. 6 All prices are subject to change without prior warning. Bundle Specifications 20 piece FJ 8m Clears 0m 15 piece FJ 81m Clears 75m piece FJ 54m Clears 50m 5 piece FJ 27m Clears 25m Single pieces 5.4m Clears random Profile No. Profile No. Profile No. Profile No. Profile No A A B B A 823A A 40x27 13B 13C 13D 19 19A 20 Eaves Mould A A A A 2 T7 T A

4 Specific Information Kiln dried timber will be dried to an average of % moisture content by the time of dispatch. However, care must be taken when product is in merchants care or on site, that the product remains so. Panelling profiles require certain fixing techniques to ensure durability. - It is important that the following steps be taken to avoid movement of product: 1. Product must be stored indoors and protected from direct sunlight. 2. Seal all around before fixing. 3. Fix by face nailing using adequate nails and glue to all fixing surfaces. (Secret nailing may not be sufficient to stop all movement of product). 4. Stain, polyurethane or paint. PurePine will provide whatever product the merchant specifies. However, no liability will be taken for incorrectly specified product. 3

5 PurePine Treated and Preprimed Products PurePine treated and preprimed products are produced with a high level of care and expertise. Our aim is to always be in the forefront with technology. We have installed the latest high tech paint line which provides an outstanding finish. PurePine uses 0% acrylic paint and PUR glue from Switzerland to ensure that we use only the most environmentally friendly products. This improves the health of our staff and reduces risk of exposure to harmful substances to our customers. We are the first in NZ to be approved to treat H3.1 using water-born methods over solvent based treatments. We apply a two coat system on all our preprimed products, so no additional primer or undercoat will be required. Before the second coat of primer is applied, each board passes through a denibber which smoothes all surfaces and creates a high quality surface finish. 4

6 STANDARD STOCK & COMMERCIAL MOULDINGS mm QUAD 2 1 mm QUAD mm QUAD 3 mm BUNGALOW 3 mm BUNGALOW mm BUNGALOW D4S 19A 19 40mm 15 O SINGLE BEVELLED ARCHITRAVE 30mm mm SCOTIA 24 24A D4S 30mm 26A 40mm 28 D4S D4S D4S D4S 5 6 D4S 35mm SCOTIA O O A 20 60mm SINGLE BEVELLED ARCHITRAVE 822A O 15 O mm BULL NOSED SKIRTING 7 30mm BEV. CORNICE 15 O 90mm SINGLE BEVELLED SKIRTING 15 O 40mm DOUBLE BEVELLED ARCHITRAVE 21 40mm BULL NOSED ARCHITRAVE 30mm 28A 40mm 22 22A 60mm BULL NOSED ARCHITRAVE 8 40mm BEV. CORNICE 90mm 5

7 31 135mm D4S COVE 16 COVE 90mm D4S 28mm 44mm 29 60mm D4S mm ANGLE FILLET 725A mm ANGLE FILLET 25 1A 25mm ANGLE FILLET mm ANGLE FILLET 1B 50mm ANGLE FILLET mm D/MOULD 8 30mm D/MOULD mm D/MOULD mm 6.5 D/MOULD 40mm EAVES MOULD DADO DADO mm 6 ASTRAGAL 13B 13A 13C 13D 25mm SCRIBER 25mm SCRIBER 30mm SCRIBER 40mm SCRIBER T7 30mm BEAD 4 T8 mm BEAD mm BEAD 40mm SCRIBER mm PAINT MOULD mm PAINT MOULD GIB MOULD 9.5 6

8 COLONIAL MOULDINGS This page subject to availability mm SKIRT mm ARCH/SKIRT 60mm ARCHITRAVE A 50 60mm GOVT ARCH 90mm GOVT ARCH 823B 135mm GOVT ARCH mm Cover 30mm 22mm mm 90mm SCOTIA BEAD BEAD BEAD 7

9 This page subject to availability mm COLONIAL mm COLONIAL 62mm Cover 90mm COLONIAL mm COLONIAL mm COLONIAL mm 113 COLONIAL 66mm COLONIAL 1 90mm COLONIAL mm COLONIAL 8

10 PANELLING / SARKING Available in random lengths & various grades x TG & V (Cover 81) x TG & V (Cover 8) x TG & V (Cover 172) x TG & V (Cover 81) x TG & V (Cover 8) x TG & V (Cover 172) 9

11 STANDARD D4S

12 BEAZLEY SILL Available on special order only 4 11

13 JAMBS Supplied in 4.2m lengths P/R 3mm 135 J2 30 P/R 3mm 135 J P/R 3mm J P/R 3mm J6 30

14 P/R 3mm 7 J6A 20.5 P/R 3mm J P/R 2mm J9 1mm P/R 2mm J7 13

15 CAVITY BATTEN Available in FJ or solid random lengths BATTENS Available either smooth or Band Sawn face

16 FASCIA H3.1 treated FJ Clear Primed White Standard 6.0 lengths

17 8 WEATHERBOARDS Ship Lap profiles available on request 3 COVER A 3 COVER A 93 16

18 Cover Cover

19 WINDOW REVEALS Available in 5.4m and 6.3m lengths. Clear grade supplied in random lengths. P/R 2mm GROOVED NOT GROOVED CLEARS GROOVED Other sizes may be available on request.

20 PurePine would like to thank you for your valued custom Main Road, Te Puke Phone: (07) Fax: (07) P.O. Box 41 Te Puke, Bay of Plenty 3071, New Zealand

PRODUCT CATALOGUE Quality produced with pride

PRODUCT CATALOGUE Quality produced with pride www.purepine.co.nz COMPANY PROFILE Purepine Mouldings is the timber re-manufacturing operation of Pukepine Sawmills. The primary base of operation is located