WARRANTY, TERMS & CONDITIONS SHIPPING & ORDERING

Transcription

1 WARRANTY, TERMS & CONDITIONS SHIPPING & ORDERING WARRANTY OFS casegoods and conference products are guaranteed to be free from defects in design, material and workmanship, given normal use and proper care, for 12 years of single shift service with the exceptions noted below. OFS will repair or replace, at our discretion without charge to the original purchaser, any product or part thereof which fails as the result of such a defect during the warranty period. OFS assumes no responsibility for repairs to products that result from user modifications, attachments to a product, misuse, abuse, alteration or negligent use. Except as stated above, OFS makes no expressed or implied warranties as to any product, and, in particular, makes no warranty of merchantability or of fitness for any particular purpose. OFS shall not be liable for consequential or incidental damages arising from any product defect. All components not listed below...12 years All drawer glide suspensions...lifetime All locking mechanisms...lifetime All door hinges...12 years Door latches...12 years Drawer pulls...12 years Task lights...3 years Casters/Hydraulic and Pneumatic lifts...2 years Remote control projection screen...2 years Base height adjustable mechanism...5 years Electrical components/power supplies...1 year This warranty does not cover: Damage caused by a transportation company. Natural variations in color, grain or texture of wood and other covering materials over which OFS has no control. Damage created by loading file drawers with anything other than hanging files. Conference tops attached to any other manufacturer s base. Fabric color matching, fabric puddling, fastness of colors or wearing qualities of any material. Freight or other shipping charges on returned product or parts, labor and service. ORDERING INFORMATION All orders should be placed with: OFS 1204 East 6th St. P.O. Box 100 Huntingburg, IN Fax order_entry@ofsbrands.com A customer drawing or sketch of the planned configuration in modular applications will facilitate order processing. PRICES All prices herein are list prices including delivery to one destination, effective with the date printed on the cover, and supersede all other published price lists. US List Prices are domestic prices only for shipment within the Continental United States. Prices are subject to change without notice, unless quoted in writing. Possession of the price list does not constitute authority to sell or offer for sale OFS products. ACKNOWLEDGMENTS Orders are acknowledged upon receipt of credit approval. Your acknowledgment is a detailed description of items, prices, shipping information and shipping date. Please read your acknowledgment closely and notify OFS immediately of any discrepancies. OFS is not responsible for errors on orders placed by phone without written confirmation. A

2 AVAILABILITY OFS is committed to the fastest possible shipment of all products. All other items are available within our normal manufacturing schedule. For information on stock availability, call our customer service hotline Note: Planned shipping dates may be delayed due to fires, strikes, natural disasters or other causes beyond our control. QUANTITY ORDERS Contact your OFS Customer Service Representative to verify inventory and production schedules to ensure requested shipment date prior to placing large quantity orders. DELIVERY AND FREIGHT CHARGES All shipments are F.O.B. point of shipment, freight prepaid and allowed, excluding fuel surcharges. Shipments outside of the Continental United States are freight prepaid and allowed to port of exit. OFS reserves the right to select the most appropriate carrier and routing on all shipments; however, we will try to accommodate requests for your preferred carrier. OFS reserves the right to implement a fuel surcharge. Orders of less than $1500 net will be assessed a handling charge of $100 net per order. Any charges arising from failure to receive a shipment, rerouting while in transit or carrier storage charges are not included in prices shown. Orders requiring special services are subject to an additional charge. These services include: Reconsignment from original destination to new destination $35 plus $3.00 per mile net Refused/Returned Freight - Freight refused at destination and returned to OFS Double Freight - Freight refused at time of delivery; returned to OFS to deliver at a later date Triple Freight Detention Fees (after 2 hours of waiting) $85 net per hour Weekend delivery available Friday after 3:00 p.m. through Sunday night or Holiday $600 net per truck Customer Pickup - Customer Request for 3rd party to pick up freight at OFS terminal $125 net Change of Tags/Address/Phone # s on Shipments $35 net SPECIAL ORDERS The OFS line of office furniture is among the most complete in the industry. However, should a particular need arise requiring size modification or customization, contact your Customer Service Representative for a price quotation. Because of the uniqueness of the product, special orders are not subject to cancellation. CANCELLATION AND ORDER CHANGES All orders accepted by OFS are considered firm and binding and are not subject to cancellation. WAREHOUSE STORAGE CHARGES If a shipment is held beyond fourteen (14) calendar days after the order is ready for shipment at your request, a.067% per day (2% per month) storage charge will be assessed. The effective date will be fourteen (14) calendar days after the order is ready for shipment, as long as this date is after the acknowledged ship date. Further, the prices applied to the order will be those prices in effect at time of shipment. EXTENDED PRODUCTION AND SHIP DATES Orders placed with OFS with extended lead times as requested by you will be subject to price in effect at time of shipment. DAMAGED MERCHANDISE AND FREIGHT CLAIMS 1. Inspect all cartons for damage and carton quantity. All shipments are delivered to the transportation company in good condition; OFS liability ceases at this time. Do not refuse merchandise damaged in transit. Instead, enter a claim with the transportation company. B

3 2. Record damages and/or shortages on the bill of lading and freight bill. Do not accept the shipment until all shortages are noted on both the bill of lading and the freight bill. Sign only for the items you receive. If you give the delivering carrier a clear receipt for a shipment, the carrier is relieved of further responsibility. 3. If concealed damage is found: Notify the delivering carrier at once and request an inspection. For shipments via Styline Logistics, notify your OFS Customer Service Representative. This must be done within fifteen (15) calendar days of delivery. Without this inspection the transportation company will not entertain a claim for loss or damage. If the carrier will not perform the inspection, you should prepare an affidavit that you contacted the carrier, noting the time and date, and that the carrier failed to comply with your request. All shipping cartons and inner packing must be retained for carrier inspection. Do not move the damaged merchandise from the receiving location. It must also be retained for the inspection. RETURN OF MERCHANDISE OFS will not accept returned merchandise without a signed Return Authorization (RA) issued by our Customer Service Department. All returned merchandise must be properly packaged and cartoned to prevent further damage. Carton must be clearly marked with identifying RA number so that proper credit can be issued. We will consider issuing RAs for the following reasons: Manufacturing defect (must be inspected by a OFS Sales Representative) OFS order processing error Shipping error Duplicate shipments Mismarked cartons All merchandise must be returned within thirty (30) days of the date of the RA to receive credit. Freight damage, signs of usage, missing parts, etc. will be adjusted on the amount of credit to be issued. REPAIR CHARGES Reimbursement from OFS for repairs must have prior approval. FINISH The patented Euroluxe finish is a chemically re-engineered Urethane clear coat that preserves the beautiful depth and clarity of OFS Brands finishes, but allows for much greater performance with chemical and scratch resistance, as well as the complete elimination of dangerous formaldehyde emissions. The Euroluxe finish system achieves indoor air quality standards set by LEED and BIFMA furniture emission standards and allows all products to achieve SCS Global Services Indoor Advantage Gold Certification. CUSTOM FINISH COLOR Custom finish matching is available for special requirements. OFS must be provided with a suitable 8" x 10" or larger finish sample. However, custom finishes can be developed to meet specific needs. There will be a $300 net upcharge per order for new custom finishes (waived on projects of $100,000 net price or more). Custom finish upcharge for repeat or additional orders will be $150 per order, even when the upcharge was waived on the original project. Custom finish matches are valid for 12 months from sample date. After this time period, custom finishes must be rematched and reapproved for use. FINISH DISCLAIMER Some desktop accessories with plastic feet can penetrate or burn the finish. This is not a defect in the finish. Wood is a natural product and minor variations in wood color, grain and texture may be visible even though the pieces are finished at the same time. Also, light finishes when exposed to ultraviolet rays may darken and change color. These are not defects in finish, and merchandise cannot be replaced because of these natural variations. C

4 BIFMA AND ANSI TESTING OFS is a member of the Business and Institutional Furniture Manufacturer s Association. Tests developed by BIFMA and approved by the American National Standards Institute (ANSI) determine the strength and durability of casegoods and seating in its everyday use. Although this testing does not serve as a warranty or guarantee, OFS products within this price list generally meet or exceed applicable BIFMA and ANSI standards. MODIFICATION PRICING Modifications must be clearly designated on customer s purchase order by placing the letters MOD in front of the model number and noting the modification needed. Example: MOD#1-EL-1628MBFC-MLC-VG with VG Forte Black [pulls] Contact your Customer Service Representative for upcharge on drawer configuration changes for traditional casegoods series. TACKBOARD FABRICS A complete list of fabrics that have been tested for tackboard application can be accessed at > Materials > select a Textile Card and hover over swatch color. A window will open displaying tackboard availability. If your selected fabric is not on the list, please contact your Customer Service Representative for approval. LOCKING INFORMATION Factory Installed Locks are always keyed alike with key number 345T. SPECIFIC KEY Requirements for specific key options by office must be specified on the purchase order at the time the order is placed. Model Numbers with specific key options will specify NO LOCK CORE on the acknowledgment. A separate line item will be listed on the acknowledgment as LOCK CORE SET. Specific lock cores and keys will be sent separately (see Field Installation below). KEYLESS CABINET LOCKING SYSTEM Keyless cabinet locking system uses radio frequency technology. One transmitter pad can operate single or multiple receiver latches. The locking system operates with separate and programmable user and supervisor codes. Optional modes are available for manual locking, self locking or single use locking of drawers and doors. Please contact your Customer Service Representative for applicability and for a price quotation. FIELD INSTALLATION Blank lock cores are installed at factory, allowing specific lock numbers to be ordered but shipped in a separate package for field installation. Lock Core Order Form (see page F) must be filled out and submitted with the purchase order. Lock core/key numbers 100 through 150 are available. For quantity of locks per unit, please visit and select Resources > Forms & Guides > Lock Core Guide. RE-KEYING IN THE FIELD Lock cores and keys can be purchased separately. The purchase order must specify quantity, key number(s) and color of the core (available in nickel, brass or black). Key numbers above number 150 are not stocked and may require a 3 week lead time. Orders ship standard UPS ground. Please note: A lock core change tool must be ordered for lock cores that will be re keyed in the field. ITEM Lock Core and Key Lock Core Change Tool Master Key $19 list $29 list $29 list ALL ITEMS ARE NON-RETURNABLE. D

5 FIRE RETARDANT PRODUCTS FIRE RETARDANT PRODUCTS California Technical Bulletin : All OFS upholstered seating products and the resilient filling materials used in the upholstered seating products meet or exceed the requirements of the State of California, Department of Consumer Affairs, Technical Bulletin Compliance with these requirements is indicated by the label attached to the seat bottom. Flame Retardant Chemicals: All standard OFS upholstered seating products are offered with components, as identified in TB , that are free of flame retardant chemicals. All OFS upholstered seating products will indicate Flame Retardant chemical composition in accordance to the labeling requirements of California Senate Bill California Technical Bulletin 133: Cal TB 133 is a flammability test for seating products used in public spaces. The testing procedure for Cal TB 133 requires the burning of an entire product since the test is a composite test and not a component test. OFS has pretested and certified many different chair styles and upholsteries. If Cal TB 133 certification is required, a burn test may need to be completed with a specific model and upholstery combination. Contact Customer Service for Cal TB 133 approval, pricing and lead times. OFS can not be held liable if purchase order does not indicate a requirement for Cal TB 133 compliance. Boston Fire Code: Please contact OFS Customer Service if compliance is required. E

6 LOCK CORE ORDER FORM OFS BRANDS LOCK CORE ORDER FORM FORM DETAILS If this lock core order form is not submitted with the purchase order, all units will be keyed 345T. Please note, each lock ordered consists of one (1) core and one (1) key. Please indicate the brand to which this order applies. If ordering for multiple brands, please use a different form for each brand. Lock cores are available in NICKEL [N], BRASS [BR] or BLACK [K]. Key numbers are in stock and available for shipment with the purchase order. Other key numbers will be ordered, acknowledged and shipped on a separate order with a three (3) week delivery. ORDER INFORMATION Please print legibly and fill out every applicable field below. DATE (MM/DD/ YYYY) SUBMITTED BY DEALER NAME END USER NAME PURCHASE ORDER NUMBER ACKNOWLEDGMENT NUMBER COMMENTS BRAND Please circle the brand to which this order applies. OFS FIRSTOFFICE CAROLINA ORDER Please continue on additional pages if needed. Mark the page number here. PAGE NUMBER TOTAL PAGES QUANTITY KEY NUMBER COLOR TAG [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] [N] [BR] [K] F

7 COM AND COL COM/COL ORDERING INSTRUCTIONS All COM and COL materials must be submitted to OFS Brands for preliminary approval prior to shipment of fabric or leather. OFS Brands approval signifies only that such materials can be applied to the products for which they are intended. Such approval does not constitute any responsibility nor any warranty on the part of OFS Brands as to the appearance, behavior or durability of the COM or COL. 1. Send 4 x 4 swatch for approval to: OFS Brands, Attn: Customer Service, 1204 East 6th St., Huntingburg, IN Send a swatch along with the order to: OFS Brands, Attn: Customer Service, 1204 East 6th St., Huntingburg, IN This sample is used to verify that the correct fabric is received. It is not used for application approval. 3. Specify the COM or COL supplier s company name, pattern, color and number. 4. The COM or COL supplier must include the dealer name and purchase order number on all packing lists. 5 Include application instructions for striped, plaid, patterned or unusually designed fabrics (i.e. direction of stripes) and which face to use on reversible fabrics. 6. Ship COM or COL material to: OFS Brands Plant 3, Attn: COM Department, 105 West 10th Street, Huntingburg, IN COM and COL orders will be scheduled for production only upon receipt of production yardage. In the absence of a representative sample sent with the purchase order or application instructions, OFS Brands will apply the fabric in what it determines to be the best manner and cannot be held responsible after upholstering. Excess COM/COL materials will be discarded at the discretion of OFS Brands unless otherwise instructed by the customer at the time the order is placed. COM YARDAGE REQUIREMENTS (RAILROADED FABRICS) Yardage requirements listed in our price list are based on 54 wide. We can take no responsibility for tailoring, wearability or application of COM covers. OFS Brands is not held responsible for receipt of defective fabrics, as we apply all COM as first quality goods. At no additional charge, OFS Brands will pre-approve any COM at the customer s request. The additional yardages are based on 54 wide goods. Please contact Customer Service if goods are less than 54 wide. Though every effort has been made to estimate excess yardage required for stripes and matches, OFS Brands takes NO responsibility where additional materials must be ordered. Repeat Railroad (RR) Right Way (RW)... 2-Way 1/4 5 Add 10% Add 15% Add 15% 6 9 Add 15% Add 18% Add 20% Add 20% Add 25% Add 30% Add 25% Add 30% Add 35% Add 30% Add 35% Add 40% Add 35% Add 40%...Add 45% Repeats larger than 19", fabrics less than 54" wide or fabrics requiring matching (stripes, plaids, prints, large patterns) will require additional yardage based on the fabric used and the item ordered. COM must be a single cut piece. Multiple pieces will require more yardage. A swatch showing one full repeat must be sent for yardage requirement instructions for these special circumstances. COM APPLICATION All COM fabrics are cut according to the fabric pattern at the discretion of OFS Brands unless otherwise directed by the customer. COM FIRE RETARDANT PRODUCTS OFS Brands assumes no responsibility for the fire retardancy of any COM/COL. Customers are solely responsible for making sure that their COM/COL complies with all applicable codes and regulations. COL (CUSTOMER S OWN LEATHER) COL requirements are based on an average hide size of square feet. Please consult the sales office for requirements on sizes different from this. All square footage requirements are based on usable footage. The shape of the hide and the usable footage may make it necessary for us to request more leather after your COL is received. Please note that leather is a natural product and variation in texture is a pleasing quality belonging exclusively to high grade, full top grain leathers. Due to the variation in thickness of leather, OFS Brands recommends sending a 4" x 4" swatch for approval. OFS Brands approval signifies only that such materials can be applied to the products for which they are intended. Such approval does not constitute any responsibility nor any warranty on the part of OFS Brands as to the appearance, behavior or durability of the COL. Note: Calf hide requirements will vary based on the chair model selected. Please contact the sales office for pattern adaptability confirmation and square footage requirements prior to placing an order. G

8 WILSONART HIGH PRESSURE LAMINATES Limber Maple Fonthill Pear Kensington Maple Grey Putty Beige Light Beige White Antique White Frosty White Black Brune Slate Oxide Almond Leather Grey Glace Neutral Glace Pampas Grey Pampas Beige Pampas Fresco Caldera Beige White Nebula Grey Nebula Graphite Nebula Cloud Nebula Natural Nebula Navy Legacy Olive Legacy Bronze Legacy Tawny Legacy Green Tigris Natural Tigris Saffron Tigris Evening Tigris Karratha Brush Maroochy Brush Woolamai Brush Mystique Moonlight Mystique Marine Mystique Night Mystique Mount Mystique Dawn Pewter Brush White Tigris Windswept Windswept Bronze Windswept Pewter Burnished Chestnut Burnished Ember Titanium EV Silicon EV Nickel EV Tungsten EV Carbon EV Antique Brush Tumbled Roca Villa Roca Terra Roca Antique Roca Desert Zephyr Canyon Zephyr Misted Zephyr Loden Zephyr Twilight Zephyr Morro Zephyr Mission Sage Mission Stone Mission Glaze Cloud Zephyr Shadow Zephyr Spiced Zephyr Western White Western Suede Western Storm Western Bronze Western Hills Sheer Mesh Grey Mesh Pewter Mesh Steel Mesh Carbon Mesh Oiled Soapstone Sable Soapstone Flame Soapstone Green Soapstone Pearl Soapstone Tan Soapstone Rustic Slate Tumbled Mosaic Mercury Glass Antique Glass Desert Springs Spicewood Springs Willow Springs Deep Springs White Tea Ginseng Tea Chai Tea Soft Gold Mesh Gilded Mesh Eggplant Pomegranate Tangerine Sweet Corn Kiwi Sprout Blue Agave White Carrara Crema Marfil Venetian Ivory Bordeaux Juparana Venetian Ale White Juparana Golden Juparana Wild Cherry Natural Pear Bannister Oak Solar Oak Beigewood Fusion Maple Manitoba Maple Tuscan Walnut Monticello Maple Castle Oak Huntington Maple River Cherry New Age Oak Brazilwood Harvest Maple Natural Rift Chardonnay D14-60 Port D25-60 Atlantis D30-60 Natural Almond D Hollyberry D Platinum D Brittany Blue D Pepperdust D Sand D Designer White D Indigo D Fashion Grey D White Sand D Lapis Blue D Alabaster D Wallaby D Café Crème D Amazon D Coffee Bean D50-60 Khaki Brown D79-60 Hunter Green D90-60 North Sea D91-60 Slate Grey D92-60 Dove Grey D96-60 Shadow D97-60 Haze THE FOLLOWING WILSONART STANDARD PATTERN HPL S ARE AVAILABLE AT STANDARD LIST PRICES WITH EXTENDED LEAD TIMES Antique White Frosty White Canyon Black Granite Blackstar Granite Ebony Star Bahia Granite Milano Amber Milano Brown Milano Quartz Milano Mahogany Sunstone Tumbled Roca Villa Roca Terra Roca Antique Roca Silver Alchemy Gold Alchemy Milano Baltic Milano Blaze Milano Rosso Polished Mosaic Frosted Glass Sea Glass Bottle Glass Windsor Mahogany Windsor Mahogany Figured Mahogany Wild Cherry Montana Walnut Empire Mahogany Empire Mahogany Nepal Teak English Oak Amber Cherry Amber Cherry Tuscan Walnut Brighton Walnut Brighton Walnut Versailles Anigre Biltmore Cherry Biltmore Cherry Monticello Maple Castle Oak Huntington Maple Cafelle Shaker Cherry Williamsburg Cherry River Cherry New Age Oak Blond Echo Tan Echo Cocobala Colombian Walnut Madagascar Xanadu Rio Mambo Asian Night Asian Sun Asian Sand Honduran Mahogany Zanzibar Kenya Mahogany Hampton Walnut Studio Teak Yarrow Aloe D12-60 Regimental Red D26-60 Persian Blue D Platinum I

9 PRODUCT CARE GUIDE WOOD CARE Careful craftsmanship combined with our Euroluxe finish makes your new OFS wood furniture incredibly durable, and with proper care your furniture will provide beauty and convenience for years. All OFS products undergo rigid color-match procedures to ensure the best in color consistency. Dust frequently using a soft, damp, clean cloth, wiping with the grain. Remove liquid spills immediately, using a blotting rather than wiping motion. To clean, use a glass cleaner formulated with ammonia. Apply a small amount to a soft dry cloth and wipe in the direction of the grain. Dry with a soft cloth. Do not use furniture polish containing oil or silicone. Avoid prolonged exposure to direct sunlight, high humidity, extreme heat or cold and moisture. LAMINATE CARE Avoid prolonged exposure to direct sunlight, high humidity, extreme heat or cold and moisture. Dust frequently with a soft, damp, clean cloth or mild detergent solution. Avoid using chemical or abrasive cleaning compounds. To avoid build up of cleaning agents, rinse the laminate surface with warm water and wipe with a clean damp cloth. SEATING CARE Dust exposed wood parts frequently using a soft, damp, clean cloth, wiping with the grain. To clean wood, use a glass cleaner formulated with ammonia. Apply a small amount to a soft dry cloth and wipe in the direction of the grain. Dry with a soft cloth. Do not use furniture polish containing oil or silicone. To clean leather and vinyl upholstery, use a warm, damp cloth to restore a bright finish. For stubborn stains, use a moisturizing soap. Remove lather with a damp cloth, but do not rinse. Buff with a dry cloth. For fabric upholstery, use a damp cloth to wipe up spills. For tougher stains, contact your local OFS dealer for cleaning instructions. Avoid prolonged exposure to direct sunlight, high humidity, extreme heat or cold and moisture. The components of your OFS chair, such as controls, casters and understructure, require common sense care and cleaning as necessary. Activate chair mechanisms periodically to ensure proper function of moving parts. CORIAN SOLID SURFACE CARE Washing with soap and water is usually sufficient to remove surface dirt or stains. Ammonia based liquid cleaner (not window cleaner) may also be used. Always rinse surface thoroughly and wipe dry. Drying is an important step, preventing a build-up of soap film or cleaning residue, which can create the appearance of light scratches over time. Stubborn soap film or cleaning residue build-up in Corian is easily removed with abrasive cleanser and a white Scotch-Brite pad or a sponge. For darker colors, a polish may be used to enhance the shine. For areas where there may be food contact, always use a polish formulated for food contact areas, such as Countertop Magic. Where food contact is not a possibility, a simple furniture polish may be used. Always follow the manufacturer s instructions for using the polish and for safety concerns. J

10 QUICKSHIP PLEASE REFERENCE OUR QUICKSHIP PRICEBOOK FOR A COMPLETE LISTING OF AVAILABLE PRODUCT OFFERED ON OUR QUICKSHIP PROGRAM. K

11 ENVIRONMENTAL ATTRIBUTES The patented Euroluxe is a chemically re-engineered Urethane clear coat that preserves the depth and clarity of OFS Brands finishes and achieves SCS Global Services Indoor Advantage Gold Certification. All OFS Brands products have achieved SCS Indoor Advantage Gold Certification from SCS Global Services. Indoor Advantage Gold certification is SCS Global Services highest level of indoor air quality performance for furniture. The certification assures that furniture products support a healthy indoor environment by meeting strict chemical emission limits for volatile organic compounds (VOCs). To be certified, products must be tested by independent labs for compliance with the ANSI/BIFMA X7.1, and either ANSI/BIFMA e.3 or CDPH/EHLB Standard Method V1-1 for VOC emissions of concerns. level is the multi attribute, sustainability standard and third party certification program for the furniture industry. It has been created to deliver the most open and transparent means of evaluating and communicating the environmental and social impacts of furniture products in the built environment. Taking into account a company s social actions, energy usage, material selection and human and ecosystem health impacts, level addresses how a product is sustainable from multiple perspectives. With level, customers can make informed choices about commercial furniture that exceed single attribute ecocertifications. The level brand identifies that a product has been vetted by an independent third party certifier and its numeric marking 1, 2, or 3 indicates what threshold of certification it has achieved. Manufacturers big and small now have a methodology to present the environmental characteristics in a clear, easily understood manner with a vernacular that gives end users the ability to make an apples to apples comparison. SCS Global Services [SCS] has been providing global leadership in third party quality, environmental and sustainability verification, certification, auditing, testing, and standards development for three decades. Its programs span a cross-section of industries, recognizing achievements in green building, product manufacturing, food and agriculture, forestry, power generation retail, and more. SCS is accredited to provide services under a wide range of nationally and internationally recognized certification programs. Consistent with its mission, SCS is a chartered benefit corporation and Certified B Corp, reflecting its commitment to socially and environmentally responsible business practices. The FSC standards [Forest Stewardship Council ] represent the world s strongest system for guiding forest management toward sustainable outcomes. us.fsc.org FSC certified products are manufactured with material that comes from managed forests that are traceable from the time the logs are cut to the time the final project is installed and are recorded by way of a COC or chain of custody claim on all invoices. The demand for certified forest products has grown significantly in recent years. OFS Brands goal to act as a responsible steward of the environment encouraged us to pursue our FSC Chain of Custody [COC] certification which would provide our customers (Dealer, A&D Community and End-users) the added reassurance they ve done their part to be earth friendly in their product purchase and enable them to substantiate the LEED [Leadership in Energy and Environmental Design] Materials & Resources Credits for certified wood, in which the intent is to encourage environmentally responsible forest management. FSC certification is optional on many, but not all, OFS Brands product lines. Please contact OFS Brands Customer Service for information in regards to which of our product lines are available as FSC certified, and what the necessary procedures are for ordering FSC certified products from OFS Brands. OFS Brands company owned transportation company, Styline Logistics, is SmartWay certified. SmartWay is one of U.S Environmental Protection Agency s [EPA] clean air programs that uses voluntary, rather than regulatory methods, to achieve air quality benefits. SmartWay s focus is in the transportation sector, and encompasses products and services associated with fuel consuming engines. The Premium Indiana Forest Products brand tells everyone that there is an abundant, sustainable supply of the finest Indiana hardwoods to meet consumer demand. It also tells them that Indiana s forests are well managed, legally harvested and environmentally responsible. The logo is reflective of the wood itself. Indiana hardwoods display a depth that defies imagination. L

12 PRODUCT REFERENCE EASY MODIFICATION LIST mod# modification detail list price 1. MOD#1 Standard OFS Brands Hardware Pulls $25 Each 3. MOD#3 Move or Add Grommets (customer to specify location) $61 Each 4. MOD#4 Reinforced Drawers - factory installed metal support bars. (Available on lateral files and on 16"D file drawers) Applicable on filing in most casegoods 24"D or under. Contact Customer Service or Specials Costing for applicability on other items. 5. MOD#5 Fabric Tackboards (any size reduction or an increase in height up to 6") $50 Per $30 Drawer 6. MOD#6 Contemporary - BBF to FF No Upcharge 7. MOD#7 Contemporary - FF to BBF No Upcharge 8. MOD#8 Wire Access Cutout in Back Panel (4" x 4") - Available on Bridges, Returns, Credenzas, & Corner Units. Cannot be located closer than 3" from any edge. For units with Signature Band, top clearance is 6". (customer to specify location) 9. MOD#9 Wire Access Cutout in Back Panel (12" x 12") - Available on Bridges, Returns, Credenzas, & Corner Units. Cannot be located closer than 3" from any edge. For units with Signature Band, top clearance is 6". (customer to specify location) No Upcharge No Upcharge 10. MOD#10 Locking (non-electronic) for wood or laminate doors only. Per individual storage section (no vertical divider).$ MOD#13 Venting Slots (customer to specify location) $ MOD#16 Laser Logo Burn In ONE TIME SET UP FEE NET $125 + NET $20 Each 17. MOD#17 Wire Access Door in Back Panel (18" x 15") Left Hinge - Available on Bridges, Returns, Credenzas, & Corner Units. Top clearance is 3". (customer to specify location) $445 Each 18. MOD#18 Set of 4 Casters - Available on some Pedestals $ MOD#22 Casegood Units Cutdown TFL, HPL and Width Only (cannot affect drawer size, glass or metal items) 15% Upcharge 23. MOD#23 Increase Worksurface or Top Depth from 48"D 59.5"D TFL, HPL and Only Excludes 3D Laminate Tops (Note: larger tops may require proportionately larger bases and support) 35% Upcharge Liability Clause: This pricing structure represents the more commonly requested product modifications. Although these modifications can be applied to the vast majority of products listed in our price books, some modifications cannot be applied to products with non-standard design features. Please contact your Customer Service Representative if you require assistance. How to Order: Example Qty MOD# Model Number Modification Detail Options Price 1 MOD#1 EL-1628MBFC with VG Forte Black pulls MLC - VG $1,541 + $75 = $1,616 M

13 VENEER Exposed surfaces are number one select cherry, walnut, maple or oak veneers. Optional sketch face veneer patterns are available on some conference table tops. Select straight and quarter grain patterns are used overall to maintain consistency between individual units. CT5 edge profile tops are number one select cherry or maple veneers. TOPS Conference tops utilize 5-ply construction with mitered corners. High pressure laminate tops are 3-ply construction with.050 thickness for high impact resistance. Tables are profiled on all sides. Two-piece conference tops are joined together with wooden dowels. Under-top mending plates and butterfly bolts ensure permanent connection. 3mm edges on " thick tops utilize 3-ply construction with externally banded hardwood. Launch edge profile tops are " thick utilizing 3-ply construction. CT5 edge profile tops are 1.5" thick utilizing 5-ply construction. BASES Bases are attached to tops using support panels and wood screws. Wire access doors for cylinder bases are 2" from the bottom. See pages for base options. ASSEMBLY Structural joints are secured by 16-gauge steel angle brackets and wood glue blocks. Adjustable levelers feature insert nuts to prevent glide tear out. FINISH The patented Euroluxe finish is a chemically re-engineered Urethane clear coat that preserves the beautiful depth and clarity of OFS' finishes, but allows for much greater performance with chemical and scratch resistance, as well as the complete elimination of dangerous formaldehyde emissions. The Euroluxe finish system achieves indoor air quality standards set by LEED and BIFMA furniture emission standards and allows all products to achieve SCS Global Services' Indoor Advantage Gold Certification. ofs.com

14 WOOD FINISHES Cherry MLC MMC Light Cherry () Mocha Cherry () Espresso Cherry () Walnut BUW Burnished () Desert () EBY Ebony () English Walnut () Natural Walnut () MSW Sable Walnut () MVW Vintage Mahogany/Walnut () Maple MBM MHM Oak Blonde Maple () Honey Maple () Clear Oak () Espresso Oak () Oslo () Pecan () Steel Grey Oak () Studio (10% upcharge) SFO Salvaged Oak (Planked) SFW Salvaged Walnut (Planked) LAMINATE FINISHES Cherry CHP Light Cherry () CMP Mocha Cherry () QEP Espresso Cherry () Walnut BUP Burnished () MEP English Walnut () NWP Natural Walnut () VMP Vintage Mahogany/Walnut () Maple BEP Blonde Maple () HNP Honey Maple () Oak COP PCP STP Clear Oak () Pecan () Steel Grey Oak () Note: EK edge profile is not available in laminate 184 ofs.com 2017

15 QUICK REFERENCE GUIDE Coordinating Edges for OFS Casegoods Edge Profiles Coordinating Casegoods Series Denali Impulse G2 Offerings Praxis EF EH " thick DT DR DS DU EK EL " thick 3mm edges DM DQ DN DW 1.5" thick " thick 3mm edges AA AB AC AD A7J A7K AE ofs.com

16 Edge Profiles Coordinating Casegoods Series Denali Impulse G2 Offerings Praxis EM EN 1.875" thick EQ ER H1R Edge Profiles Coordinating Casegoods Series Classic Executive I Legacy " thick " thick 1.875" thick 3.75" thick EG EJ EP ES 3.625" thick ET 186 ofs.com 2017

17 Our unsurpassed conference offering includes an array of top shapes and sizes, numerous base styles, some with wire management capabilities, edge choices that complement our casegoods and distinct veneer patterns. available in cherry, walnut, maple or oak wood species. TOP SHAPES Four top shapes are available in sizes ranging from 36" diameter to 48"D x 192"W rectangular. Round Rectangular Boat-Shaped Racetrack GRAIN PATTERNS Some tops are available in a choice of straight, long, sketch border, or sunburst veneer grain patterns. Below are the options available on each top shape. Round Tops Rectangular Tops Boat-Shaped Tops Racetrack Tops Straight Grain Long Grain Long Grain Long Grain Sketch Border Sketch Border Sunburst LAMINATE INSERT TOPS Four top shapes are available in sizes ranging from 36" diameter to 48"D x 192"W rectangular. Round Square Rectangular Racetrack ofs.com

18 ROUND TOP STANDARD FEATURES Round Lumber Banded Edge; EK Cutback Edge is not Lumber Banded One-Piece Top One Base Required Straight Grain Tops available in Laminate Sketch Border and Sunburst not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Round Tops NOTE: All Round Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight " THICK Straight Grain CT1-36-4G Straight Grain $ 1,818 Seats Three to Four Sketch Border CT1-42-4G Straight Grain $ 1,998 CT1-42-4B Sketch Border $ 3,150 CT1-42-4S Sunburst $ 2,905 Seats Four Sunburst CT1-48-4G Straight Grain $ 2,449 CT1-48-4B Sketch Border $ 3,729 CT1-48-4S Sunburst $ 3,391 Seats Four to Five CT1-60-4G Straight Grain $ 3,767 CT1-60-4B Sketch Border $ 5,751 CT1-60-4S Sunburst $ 5,666 Seats Seven Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EF Square EH Concave EG Sierra DT Transitional QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EJ Galiant DR Bevel DS Reed DU Radius EK Launch 2" Knife (not available in laminate) SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT1-36-4G Finish Edge Power Cutout MHM EH QR 188 ofs.com 2017

19 ROUND TOP, 3MM EDGE STANDARD FEATURES Round 3mm Edge One-Piece Top One Base Required Straight Grain Tops available in Laminate Sketch Border and Sunburst not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Round Tops NOTE: All Round Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight " THICK Straight Grain CT2-36-4G Straight Grain $ 1,128 Seats Three to Four Sketch Border CT2-42-4G Straight Grain $ 1,397 CT2-42-4B Sketch Border $ 2,839 CT2-42-4S Sunburst $ 2,617 Seats Four Sunburst CT2-48-4G Straight Grain $ 1,760 CT2-48-4B Sketch Border $ 3,548 CT2-48-4S Sunburst $ 3,264 Seats Four to Five CT2-60-4G Straight Grain $ 2,604 CT2-60-4B Sketch Border $ 5,177 CT2-60-4S Sunburst $ 4,738 Seats Seven Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DM Bead DQ Flair QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP DN Square SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT2-36-4G Finish Edge Power Cutout MHM DM QR ofs.com

20 ROUND LAMINATE INSERT TOP STANDARD FEATURES External Lumber Banded Top Laminate Insert One-Piece Top One Base Required See pages for Base Options See pages for Power Supply and Base Applicability Round Tops NOTE: All Round Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight " THICK CTX4G $ 1,648 Seats Three to Four CTX4G $ 1,796 Seats Four CTX4G $ 2,246 Seats Four to Five CTX4G $ 3,113 Seats Five to Six CTX4G $ 3,541 Seats Seven Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Specify laminate vendor. HPL Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP MLC MMC BUW EBY MSW MVW MBM MHM EF Square QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) For other laminates including Wilsonart, Nevamar and Pionite laminates, contact you Customer Representative for price and availability. DR Bevel DS Reed DU Radius EL Bullnose SPECIFY: Laminate vendor laminate color edge finish edge shape power cutout. See page 184 for the designator finish name. CTX4G-36 Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Wilsonart Windsor Mahogany MLC EF QR 190 ofs.com 2017

21 ROUND TOP STANDARD FEATURES Round Lumber Banded Edge One-Piece Top One Base Required Available in Straight Grain only Available in Laminate See pages for Base Options See pages for Power Supply and Base Applicability Round Tops NOTE: All Round Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight. 1.5" THICK CT5-36RT $ 1,998 Seats Three to Four CT5-42RT $ 2,358 Seats Four CT5-48RT $ 2,816 Seats Four to Five CT5-54RT $ 3,296 Seats Five to Six CT5-60RT $ 4,087 Seats Seven Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DW Ace AA Bay QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AB Index AC Radius AD Reed SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT5-36RT Finish Edge Power Cutout MLC DW QR ofs.com

22 ROUND TOP STANDARD FEATURES Round Lumber Banded Edge Solid Hardwood Rims are Finished to Match Worksurface Species One-Piece Top One Base Required Available in Laminate See pages for Base Options See pages for Power Supply and Base Applicability Round Tops NOTE: All Round Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight. 1.5" THICK CT6-36RT $ 1,998 Seats Three to Four CT6-42RT $ 2,358 Seats Four CT6-48RT $ 2,816 Seats Four to Five CT6-54RT $ 3,296 Seats Five to Six CT6-60RT $ 4,087 Seats Seven Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW AA Bay AB Index QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AC Radius AD Reed SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT6-36RT Finish Edge Power Cutout MLC AA QR 192 ofs.com 2017

23 ROUND TOP, 3MM EDGE STANDARD FEATURES One-Piece Top One Base Required Straight Grain Tops available in Laminate Sketch Border and Sunburst not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Round Tops NOTE: All Round Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight " THICK Straight Grain CT7-36-4G Straight Grain $ 1,242 Seats Three to Four Sketch Border CT7-42-4G Straight Grain $ 1,537 CT7-42-4B Sketch Border $ 3,123 CT7-42-4S Sunburst $ 2,879 Seats Four Sunburst CT7-48-4G Straight Grain $ 1,936 CT7-48-4B Sketch Border $ 3,902 CT7-48-4S Sunburst $ 3,590 Seats Four to Five CT7-60-4G Straight Grain $ 2,864 CT7-60-4B Sketch Border $ 5,694 CT7-60-4S Sunburst $ 5,211 Seats Seven Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW A7J Bead A7K Flair QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AE Square SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT7-36-4G Finish Edge Power Cutout MLC A7J QR ofs.com

24 ROUND TOP STANDARD FEATURES Round Lumber Banded Edge One-Piece Top One Base Required Straight Grain Tops available in Laminate Sketch Border and Sunburst not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Round Tops NOTE: All Round Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight " THICK Straight Grain CT3-36-4G Straight Grain $ 1,998 Seats Three to Four Sketch Border CT3-42-4G Straight Grain $ 2,358 CT3-42-4B Sketch Border $ 3,555 CT3-42-4S Sunburst $ 3,175 Seats Four Sunburst CT3-48-4G Straight Grain $ 2,816 CT3-48-4B Sketch Border $ 3,991 CT3-48-4S Sunburst $ 3,635 Seats Four to Five CT3-60-4G Straight Grain $ 4,087 CT3-60-4B Sketch Border $ 6,292 CT3-60-4S Sunburst $ 5,995 Seats Seven Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EM 1.875" Radius EN 1.875" Square QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EP 1.875" Sierra EQ 1.875" Bevel ER 1.875" Reed H1R 1.875" Corona SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT3-36-4G Finish Edge Power Cutout MHM EM QR 194 ofs.com 2017

25 ROUND TEMPERED CLEAR GLASS TOP STANDARD FEATURES High Polished Chrome Base CT1G $ 714 CT1G-35 ofs.com

26 SQUARE LAMINATE INSERT TOP STANDARD FEATURES External Lumber Banded Top One-Piece Top One Base Required See pages for Base Options See pages for Power Supply and Base Applicability Square Tops " THICK CTX5G $ 1,363 CTX5G $ 1,586 CTX5G $ 1,826 CTX5G $ 2,543 Seats Four CTX5G $ 2,993 Seats Six Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Specify laminate vendor. HPL Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP MLC MMC BUW EBY MSW MVW MBM MHM EF Square QR No Power Cutout - Standard QV Power Cutout Centered over Base NOTE: Grommets and Power Supplies must be ordered separately (see pages ) For other laminates including Wilsonart, Nevamar and Pionite laminates, contact you Customer Representative for price and availability. DR Bevel DS Reed DU Radius EL Bullnose SPECIFY: Laminate vendor laminate color edge finish edge shape power cutout. See page 184 for the designator finish name. CTX5G-36 Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Wilsonart Windsor Mahogany MLC EF QR 196 ofs.com 2017

27 RECTANGULAR TOP STANDARD FEATURES Rectangular Lumber Banded Edge; EK Cutback Edge is not Lumbar Banded Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops " THICK Long Grain Two Bases Required One-Piece Top CT G $ 2,272 Seats Six CT G $ 3,312 Seats Eight " THICK Long Grain CT G $ 5,678 Seats 10 Three Bases Required Two 5' Pieces CT G $ 6,492 Seats 12 Three Bases Required Two 6' Pieces CT G $ 7,491 Seats 14 Three Bases Required Two 7' Pieces CT G $ 8,622 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EF Square EH Concave EG Sierra DT Transitional QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 239). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EJ Galiant DR Bevel DS Reed DU Radius EK Launch 2" Knife (not available in laminate) SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM EH QR ofs.com

28 RECTANGULAR TOP, 3MM EDGE STANDARD FEATURES Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops " THICK Long Grain Two Bases Required One-Piece Top CT G $ 1,801 Seats Six CT G $ 2,808 Seats Eight " THICK Long Grain CT G $ 4,228 Seats 10 Three Bases Required Two 5' Pieces CT G $ 4,908 Seats 12 Three Bases Required Two 6' Pieces CT G $ 5,878 Seats 14 Three Bases Required Two 7' Pieces CT G $ 6,678 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DM Bead DQ Flair QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 239). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP DN Square DP Kerf SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM DM QR 198 ofs.com 2017

29 RECTANGULAR LAMINATE INSERT TOP STANDARD FEATURES External Lumbar Banded Top Two Bases Required One-Piece Top See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops " THICK CTX1G $ 1,992 Seats Six CTX1G $ 2,829 Seats Eight RECTANGULAR LAMINATE INSERT TOP STANDARD FEATURES External Lumbar Banded Top Laminate Insert Three Bases Required See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops " THICK CTX1G $ 5,326 Seats 10 Two 5' Pieces CTX1G $ 5,986 Seats 12 Two 6' Pieces Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Specify laminate vendor. HPL Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP For other laminates including Wilsonart, Nevamar and Pionite laminates, contact you Customer Representative for price and availability. MLC MMC BUW EBY MSW MVW MBM MHM EF Square DR Bevel QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). DS Reed DU Radius EL Bullnose SPECIFY: Laminate vendor laminate color edge finish edge shape power cutout. See page 184 for the designator finish name. CTX1G-7236 Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Wilsonart Windsor Mahogany MLC EF QR ofs.com

30 RECTANGULAR TOP STANDARD FEATURES Rectangular Lumber Banded Edge Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops 1.5" THICK Long Grain Two Bases Required One-Piece Top CT5-7236RT $ 2,449 Seats Six CT5-9642RT $ 3,723 Seats Eight 1.5" THICK Long Grain CT RT $ 6,174 Seats 10 Three Bases Required Two 5' Pieces CT RT $ 6,989 Seats 12 Three Bases Required Two 6' Pieces CT RT $ 7,946 Seats 14 Three Bases Required Two 7' Pieces CT RT $ 9,310 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DW Ace AA Bay QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AB Index AC Radius AD Reed SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT5-7236RT Finish Edge Power Cutout MLC DW QR 200 ofs.com 2017

31 RECTANGULAR TOP, 3MM EDGE STANDARD FEATURES Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) Two Bases Required One-Piece Top See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops " THICK Long Grain Two Bases Required One-Piece Top CT G $ 1,980 Seats Six CT G $ 3,090 Seats Eight " THICK Long Grain CT G $ 4,652 Seats 10 Three Bases Required Two 5' Pieces CT G $ 5,399 Seats 12 Three Bases Required Two 6' Pieces CT G $ 6,465 Seats 14 Three Bases Required Two 7' Pieces CT G $ 7,346 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW A7J Bead A7K Flair QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AE Square SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MLC A7J QR ofs.com

32 RECTANGULAR TOP STANDARD FEATURES Rectangular Lumber Banded Edge Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops 1.875" THICK Long Grain Two Bases Required One-Piece Top CT G $ 2,449 Seats Six CT G $ 3,723 Seats Eight 1.875" THICK Long Grain CT G $ 6,174 Seats 10 Three Bases Required Two 5' Pieces CT G $ 6,989 Seats 12 Three Bases Required Two 6' Pieces CT G $ 7,946 Seats 14 Three Bases Required Two 7' Pieces CT G $ 9,310 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EM 1.875" Radius EN 1.875" Square QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EP 1.875" Sierra EQ 1.875" Bevel ER 1.875" Reed H1R 1.875" Corona SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM EM QR 202 ofs.com 2017

33 RECTANGULAR TOP STANDARD FEATURES Rectangular Lumber Banded Edge Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Rectangular Tops 3.75" (ES) OR 3.625" (ET) THICK Long Grain Two Bases Required One-Piece Top CT G $ 2,590 Seats Six CT G $ 3,994 Seats Eight 3.75" (ES) OR 3.625" (ET) THICK Long Grain CT G $ 6,218 Seats 10 Three Bases Required Two 5' Pieces CT G $ 7,263 Seats 12 Three Bases Required Two 6' Pieces CT G $ 8,082 Seats 14 Three Bases Required Two 7' Pieces CT G $ 9,496 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW ES 3.75" Sierra QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP ET 3.625" Galiant SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MLC ES QR ofs.com

34 BOAT-SHAPED TOP STANDARD FEATURES Boat-Shaped Lumber Banded Edge; EK Cutback Edge is not Lumber Banded Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) Sketch Border not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Boat-Shaped Tops " THICK Long Grain Sketch Border CT G Long Grain $ 4,539 CT B Sketch Border $ 6,634 Seats Eight Two Bases Required One-Piece Top " THICK Long Grain Sketch Border CT G Long Grain $ 6,281 CT B Sketch Border $ 8,619 Seats 10 Three Bases Required Two 5' Pieces CT G Long Grain $ 7,263 CT B Sketch Border $ 10,411 Seats 12 Three Bases Required Two 6' Pieces CT G Long Grain $ 8,167 Seats 14 Three Bases Required Two 7' Pieces CT G Long Grain $ 9,532 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EF Square EH Concave EG Sierra DT Transitional QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EJ Galiant DR Bevel DS Reed DU Radius EK Launch 2" Knife (not available in laminate) SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM EH QR 204 ofs.com 2017

35 BOAT-SHAPED TOP, 3MM EDGE STANDARD FEATURES Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) Sketch Border not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Boat-Shaped Tops " THICK Long Grain Sketch Border CT G Long Grain $ 3,015 CT B Sketch Border $ 5,915 Seats Eight Two Bases Required One-Piece Top " THICK Long Grain Sketch Border CT G Long Grain $ 4,637 CT B Sketch Border $ 8,257 Seats 10 Three Bases Required Two 5' Pieces CT G Long Grain $ 5,364 CT B Sketch Border $ 9,709 Seats 12 Three Bases Required Two 6' Pieces CT G Long Grain $ 6,314 Seats 14 Three Bases Required Two 7' Pieces CT G Long Grain $ 7,225 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DM Bead DQ Flair QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP DN Square DP Kerf SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM DM QR ofs.com

36 BOAT-SHAPED TOP STANDARD FEATURES Boat-Shaped Lumber Banded Edge Available in Long Grain only Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Boat-Shaped Tops 1.5" THICK Long Grain CT5-9642BT $ 5,128 Seats Eight Two Bases Required One-Piece Top 1.5" THICK Long Grain CT BT $ 6,809 Seats 10 Three Bases Required Two 5' Pieces CT BT $ 7,716 Seats 12 Three Bases Required Two 6' Pieces CT BT $ 8,900 Seats 14 Three Bases Required Two 7' Pieces CT BT $ 10,306 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DW Ace AA Bay QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AB Index AC Radius AD Reed SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT5-9642BT Finish Edge Power Cutout MLC DW QR 206 ofs.com 2017

37 BOAT-SHAPED TOP, 3MM EDGE STANDARD FEATURES Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) Sketch Border not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Boat-Shaped Tops " THICK Long Grain Sketch Border CT G Long Grain $ 3,317 CT B Sketch Border $ 6,507 Seats Eight Two Bases Required One-Piece Top " THICK Long Grain Sketch Border CT G Long Grain $ 5,101 CT B Sketch Border $ 9,084 Seats 10 Three Bases Required Two 5' Pieces CT G Long Grain $ 5,900 CT B Sketch Border $ 10,682 Seats 12 Three Bases Required Two 6' Pieces CT G Long Grain $ 6,946 Seats 14 Three Bases Required Two 7' Pieces CT G Long Grain $ 7,947 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW A7J Bead A7K Flair QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AE Square SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM A7J QR ofs.com

38 BOAT-SHAPED TOP STANDARD FEATURES Boat-Shaped Lumbar Banded Edge Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) Sketch Border not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Boat-Shaped Tops 1.875" THICK Long Grain Sketch Border CT G Long Grain $ 5,128 CT B Sketch Border $ 7,119 Seats Eight Two Bases Required One-Piece Top 1.875" THICK Long Grain Sketch Border CT G Long Grain $ 6,809 CT B Sketch Border $ 9,293 Seats 10 Three Bases Required Two 5' Pieces CT G Long Grain $ 7,716 CT B Sketch Border $ 11,039 Seats 12 Three Bases Required Two 6' Pieces CT G Long Grain $ 8,900 Seats 14 Three Bases Required Two 7' Pieces CT G Long Grain $ 10,306 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EM 1.875" Radius EN 1.875" Square QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EP 1.875" Sierra EQ 1.875" Bevel ER 1.875" Reed H1R 1.875" Corona SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM EM QR 208 ofs.com 2017

39 BOAT-SHAPED TOP STANDARD FEATURES Boat-Shaped Lumbar Banded Edge Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) Sketch Border not available in Oak or Laminate See pages for Base Options See pages for Power Supply and Base Applicability Boat-Shaped Tops 3.75" THICK Long Grain Sketch Border CT G Long Grain $ 5,128 CT B Sketch Border $ 7,167 Seats Eight Two Bases Required One-Piece Top 3.75" THICK Long Grain Sketch Border CT G Long Grain $ 6,809 CT B Sketch Border $ 9,444 Seats 10 Three Bases Required Two 5' Pieces CT G Long Grain $ 7,808 CT B Sketch Border $ 11,134 Seats 12 Three Bases Required Two 6' Pieces CT G Long Grain $ 8,900 Seats 14 Three Bases Required Two 7' Pieces CT G Long Grain $ 10,668 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW ES 3.75" Sierra QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MLC ES QR ofs.com

40 RACETRACK TOP STANDARD FEATURES Racetrack Lumber Banded Edge; EK Cutback Edge is not Lumber Banded Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Racetrack Tops " THICK Long Grain Two Bases Required One-Piece Top CT G $ 2,816 Seats Six CT G $ 4,405 Seats Eight " THICK Long Grain CT G $ 5,678 Seats 10 Three Bases Required Two 5' Pieces CT G $ 7,040 Seats 12 Three Bases Required Two 6' Pieces CT G $ 7,946 Seats 14 Three Bases Required Two 7' Pieces CT G $ 9,079 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EF Square EH Concave EG Sierra DT Transitional QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EJ Galiant DR Bevel DS Reed DU Radius EK Launch 2" Knife (not available in laminate) SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM EH QR 210 ofs.com 2017

41 RACETRACK TOP, 3MM EDGE STANDARD FEATURES Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Racetrack Tops " THICK Long Grain Two Bases Required One-Piece Top CT G $ 1,971 Seats Six CT G $ 3,049 Seats Eight " THICK Long Grain CT G $ 4,739 Seats 10 Three Bases Required Two 5' Pieces CT G $ 5,463 Seats 12 Three Bases Required Two 6' Pieces CT G $ 6,479 Seats 14 Three Bases Required Two 7' Pieces CT G $ 7,327 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DM Bead DQ Flair QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP DN Square DP Kerf SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM DM QR ofs.com

42 RACETRACK LAMINATE INSERT TOP STANDARD FEATURES External Lumber Banded Top See pages for Base Options See pages for Power Supply and Base Applicability Racetrack Tops " THICK Two Bases Required One-Piece Top CTX3G $ 2,664 Seats Six CTX3G $ 3,741 Seats Eight " THICK Three Bases Required CTX3G $ 5,463 Seats 10 Two 5' Pieces CTX3G $ 6,584 Seats 12 Two 6' Pieces Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Specify laminate vendor. HPL Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP For other laminates including Wilsonart, Nevamar and Pionite laminates, contact you Customer Representative for price and availability. MLC MMC BUW EBY MSW MVW MBM MHM EF Square DR Bevel QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). DS Reed DU Radius EL Bullnose SPECIFY: Laminate vendor laminate color edge finish edge shape power cutout. See page 184 for the designator finish name. CTX3G-7236 Laminate Vendor Laminate Color Edge Finish Edge Shape Power Cutout Wilsonart Windsor Mahogany MLC EF QR 212 ofs.com 2017

43 RACETRACK TOP STANDARD FEATURES Racetrack Lumber Banded Edge Available in Long Grain only Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Racetrack Tops 1.5" THICK Long Grain Two Bases Required One-Piece Top CT5-7236AT $ 3,312 Seats Six CT5-9642AT $ 4,858 Seats Eight 1.5" THICK Long Grain CT AT $ 6,492 Seats 10 Three Bases Required Two 5' Pieces CT AT $ 7,716 Seats 12 Three Bases Required Two 6' Pieces CT AT $ 8,622 Seats 14 Three Bases Required Two 7' Pieces CT AT $ 10,075 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW DW Ace AA Bay QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AB Index AC Radius AD Reed SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT5-7236AT Finish Edge Power Cutout MLC DW QR ofs.com

44 RACETRACK TOP, 3MM EDGE STANDARD FEATURES Available in Long Grain only Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Racetrack Tops " THICK Long Grain Two Bases Required One-Piece Top CT G $ 2,169 Seats Six CT G $ 3,353 Seats Eight " THICK Long Grain CT G $ 5,212 Seats 10 Three Bases Required Two 5' Pieces CT G $ 6,009 Seats 12 Three Bases Required Two 6' Pieces CT G $ 7,127 Seats 14 Three Bases Required Two 7' Pieces CT G $ 8,060 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW A7J Bead A7K Flair QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP AE Square SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM A7J QR 214 ofs.com 2017

45 RACETRACK TOP STANDARD FEATURES Racetrack Lumber Banded Edge Available with Grain Matched Laminate Top up to 12' only (Laminate available in Larger Sizes without Grain Match) See pages for Base Options See pages for Power Supply and Base Applicability Racetrack Tops 1.875" THICK Long Grain Two Bases Required One-Piece Top CT G $ 3,312 Seats Six CT G $ 4,858 Seats Eight 1.875" THICK Long Grain CT G $ 6,492 Seats 10 Three Bases Required Two 5' Pieces CT G $ 7,716 Seats 12 Three Bases Required Two 6' Pieces CT G $ 8,622 Seats 14 Three Bases Required Two 7' Pieces CT G $ 10,075 Seats 16 Three or Four Bases Required; see page 221 Two 8' Pieces Finish Edge Power Cutout Studio Planked (10% upcharge) SFO SFW EM 1.875" Radius EN 1.875" Square QR No Power Cutout - Standard NOTE: Grommets and Power Supplies must be ordered separately (see pages ). To order Power Cutout, select location (see page 240). Wood Grain Laminate QEP MEP NWP COP PCP STP CHP CMP BUP VMP BEP HNP EP 1.875" Sierra EQ 1.875" Bevel ER 1.875" Reed H1R 1.875" Corona SPECIFY: Finish edge power cutout. See page 184 for the designator finish name. CT G Finish Edge Power Cutout MHM EM QR ofs.com

46 Our conference offering includes numerous base choices to complement our tops. For easy selection of bases we have compiled this quick reference guide of compatible bases with tops. After base is selected see pages for specifications and ordering. BASE FOR ROUND AND SQUARE TOPS NOTE: All round and square conference tops require additional weight in the base when using cylinder bases to prevent the table from tipping over. OFS provides instruction sheets and clear 6 ml bags with base. Customer must provide dry sand for the additional weight. 36"D TOPS CB-F CB-L CBD-Q CB-T CB-04 CB-06 CBM-07 MXB-32 (For 42"D Tops MX4-30 (For 42"D Tops MCB-23 (For Round Tops) MCB-28 (For Square Tops) MLX-1 MLC-1 CHB-01 CHB-02 42"D AND 48"D TOPS 2 Bases Shown CB-A (2 Qty.) CBH-F CB-L CB-M CB-Q CB-R CB-T CB-3V CBH-04 CBH-06 CBM-07 MXB-32 (For 42"D Tops) TSX38 (For 48"D Tops) MX4-30 (For 42"D Tops) MX4-38 (For 48"D Tops) MCB-23 (For 42"D Round Tops) MCB-28 (For 42"D Square & 48"D Round Tops) MLX-1 MLC ofs.com 2017

47 Our conference offering includes numerous base choices to complement our tops. For easy selection of bases we have compiled this quick reference guide of compatible bases with tops. After base is selected see pages for specifications and ordering. BASE FOR ROUND AND SQUARE TOPS NOTE: All round and square conference tops require additional weight in the base when using cylinder bases to prevent the table from tipping over. OFS provides instruction sheets and clear 6 ml bags with base. Customer must provide dry sand for the additional weight. 54"D AND 59 1/2"D TOPS 2 Bases Shown CB-A (2 Qty.) CBU-F CB-L CBU-M CBU-Q CBU-R CB-T CB-3V CBU-04 CBU-06 MX4-38 TSX38 (For 54" Round and Square Tops) MCB-28 (For 54"D Round Tops) MLX-1 MLC-1 ofs.com

48 Our conference offering includes numerous base choices to complement our tops. For easy selection of bases we have compiled this quick reference guide of compatible bases with tops. After base is selected see pages for specifications and ordering. BASE FOR RECTANGULAR, BOAT-SHAPED AND RACETRACK TOPS (BASES INSET 20") 72"W X 36"D TOPS CBD-B (2 Qty.) 26" Between Bases CBD-S (2 Qty.) 35.75" Between Bases CBD-U (2 Qty.) " Between Bases CBD-Y (2 Qty.) 36.75" Between Bases CBD-12 (2 Qty.) 27" Between Bases CB-01 (2 Qty.) 28.5" Between Bases CB-02 (2 Qty.) 25" Between Bases MTB2 (2 Qty.) 39" Between Bases MCB-23 (2 Qty.) (For Rectangular and Racetrack Tops) 13" Between Bases 96"W X 42"D TOPS CB-A (2 Qty.) " Between Bases CB-B (2 Qty.) 30.5" Between Bases CB-C (2 Qty.) " Between Bases CB-D (2 Qty.) " Between Bases CB-24EB (2 Qty.) 41.25" Between Bases CB-S (2 Qty.) 43.75" Between Bases CB-U (2 Qty.) " Between Bases CB-2V (2 Qty.) " Between Bases CB-Y (2 Qty.) 44.75" Between Bases CB-01 (2 Qty.) 36.5" Between Bases CB-02 (2 Qty.) 33" Between Bases CB-03 (2 Qty.) 35" Between Bases CBH-03 (2 Qty.) 25" Between Bases CB-05 (2 Qty.) 33.25" Between Bases CBH-05 (2 Qty.) 23.25" Between Bases CB-11 (2 Qty.) 36.25" Between Bases CB-12 (2 Qty.) 35" Between Bases MTB2 (2 Qty.) 47" Between Bases MCB-23 (2 Qty.) 21" Between Bases 218 ofs.com 2017

49 Our conference offering includes numerous base choices to complement our tops. For easy selection of bases we have compiled this quick reference guide of compatible bases with tops. After base is selected see pages for specifications and ordering. BASE FOR RECTANGULAR, BOAT-SHAPED AND RACETRACK TOPS (BASES INSET 20") 120"W X 48"D AND 144"W X 48"D TOPS CB-A (2 Qty.) + CB-D Base 28" Between Bases (120) 40" Between Bases (144) CB-B (2 Qty.) + CB-Y Base 26" Between Bases (120) 38" Between Bases (144) CB-C (2 Qty.) + CB-D Base 27.75" Between Bases (120) 39.75" Between Bases (144) CB-D (3 Qty.) " Between Bases (120) " Between Bases (144) CB-24EB (3 Qty.) " Between Bases (120) " Between Bases (144) CB-S (3 Qty.) " Between Bases (120) " Between Bases (144) CB-U (3 Qty.) " Between Bases (120) " Between Bases (144) CB-2V (2 Qty.) + CB-U Base " Between Bases (120) " Between Bases (144) CB-Y (3 Qty.) " Between Bases (120) " Between Bases (144) CB-01 (2 Qty.) + CB-02 Base " Between Bases (120) " Between Bases (144) CB-02 (3 Qty.) 23.5" Between Bases (120) 35.5" Between Bases (144) CB-03 (3 Qty.) 25.5" Between Bases (120) 37.5" Between Bases (144) CB-03 (2 Qty.) + CB-03 Base 21" Between Bases (120) 33" Between Bases (144) CB-05 (3 Qty.) 23.75" Between Bases (120) 35.75" Between Bases (144) CB-05 (2 Qty.) + CBH-05 Base 19.25" Between Bases (120) 31.25" Between Bases (144) CB-11 (3 Qty.) 26.75" Between Bases (120) 38.75" Between Bases (144) CB-12 (3 Qty.) 25.5" Between Bases (120) 37.5" Between Bases (144) MTB2 (3 Qty.) 34.5" Between Bases (120) 46.5" Between Bases (144) MCB-28 (3 Qty.) 6" Between Bases (120) 18" Between Bases (144) 120"W X 48"D TOPS ONLY 144"W X 48"D TOPS ONLY CB-B (2 Qty.) + CBH-F Base " Between Bases (120) CB-B (2 Qty.) + CBU-F Base 29.25" Between Bases (144) CBH-03 (3 Qty.) 24" Between Bases (144) CBH-05 (3 Qty.) 22.25" Between Bases (144) ofs.com

50 Our conference offering includes numerous base choices to complement our tops. For easy selection of bases we have compiled this quick reference guide of compatible bases with tops. After base is selected see pages for specifications and ordering. BASE FOR RECTANGULAR, BOAT-SHAPED AND RACETRACK TOPS (BASES INSET 20") 168"W X 48"D TOPS CB-A (2 Qty.) + CB-D Base 52" Between Bases CB-B (2 Qty.) + CBH-F Base 41.25" Between Bases CB-B (2 Qty.) + CB-Y Base 50" Between Bases CB-C (2 Qty.) + CB-D Base 51.75" Between Bases CB-D (3 Qty.) " Between Bases CB-24EB (3 Qty.) " Between Bases CBH-F (3 Qty.) " Between Bases CB-L (3 Qty.) " Between Bases CB-M (3 Qty.) 33" Between Bases CB-Q (3 Qty.) " Between Bases CB-R (3 Qty.) " Between Bases CB-S (3 Qty.) " Between Bases CB-T (3 Qty.) " Between Bases CB-U (3 Qty.) " Between Bases CB-2V (2 Qty.) + CB-U Base " Between Bases CB-Y (3 Qty.) " Between Bases CB-01 (2 Qty.) + CB-02 Base " Between Bases CB-02 (3 Qty.) 47.5" Between Bases CB-03 (3 Qty.) 49.5" Between Bases CB-03 (2 Qty.) + CBH-03 Base 45" Between Bases CBH-03 (3 Qty.) 36" Between Bases CBH-04 (3 Qty.) 27.5" Between Bases CB-05 (3 Qty.) 47.75" Between Bases CB-05 (2 Qty.) + CBH-05 Base 43.25" Between Bases CBH-05 (3 Qty.) 34.25" Between Bases CBH-06 (3 Qty.) 25.75" Between Bases CB-11 (3 Qty.) 50.75" Between Bases CB-12 (3 Qty.) 49.5" Between Bases CBM-07 (3 Qty.) " Between Bases MTB2 (4 Qty.) " Between Bases MCB-28 (3 Qty.) 30" Between Bases 220 ofs.com 2017

51 Our conference offering includes numerous base choices to complement our tops. For easy selection of bases we have compiled this quick reference guide of compatible bases with tops. After base is selected see pages for specifications and ordering. BASE FOR RECTANGULAR, BOAT-SHAPED AND RACETRACK TOPS (BASES INSET 20") 192"W X 48"D TOPS CB-A (2 Qty.) + CB-D Base (2 Qty.) 41" Between Bases CB-B (2 Qty.) + CB-Y Base (Qty.) 40" Between Bases CB-C (2 Qty.) + CB-D Base (2 Qty.) 41" Between Bases CB-D (4 Qty.) 44.75" Between Bases CB-24EB (4 Qty.) 41.75" Between Bases CBH-F (3 Qty.) " Between Bases CBU-F (3 Qty.) " Between Bases CB-L (3 Qty.) " Between Bases CB-M (3 Qty.) 45" Between Bases CBU-M (3 Qty.) 37.5" Between Bases CB-Q (3 Qty.) " Between Bases CB-R (3 Qty.) " Between Bases CBU-R (3 Qty.) 35.25" Between Bases CB-S (4 Qty.) 44.25" Between Bases CB-T (3 Qty.) " Between Bases CB-U (4 Qty.) 44" Between Bases CB-2V (2 Qty.) + CB-U Base (2 Qty.) 45.25" Between Bases CB-Y (4 Qty.) 45.25" Between Bases CB-01 (2 Qty.) + CB-02 Base (2 Qty.) " Between Bases CB-02 (4 Qty.) " Between Bases CB-03 (4 Qty.) " Between Bases CBH-03 (3 Qty.) 48" Between Bases CBH-04 (3 Qty.) 39.5" Between Bases CBU-04 (3 Qty.) 37.5" Between Bases CB-05 (4 Qty.) 37.5" Between Bases CBH-05 (3 Qty.) 46.25" Between Bases CBH-06 (3 Qty.) 37.75" Between Bases CBU-06 (3 Qty.) 34.75" Between Bases CB-11 (4 Qty.) " Between Bases CB-12 (4 Qty.) " Between Bases CBM-07 (3 Qty.) " Between Bases MTB2 (4 Qty.) " Between Bases MCB-28 (3 Qty.) 42" Between Bases ofs.com

52 BASE STANDARD FEATURES Adjustable Levelers Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. CURVED CB-A $ 1,455 Black Vein Line, no Brass NOTE: For Round and Square Conference Table Tops: Two Bases are Required. Cannot be used with 36" Round, 36" Square or 72"W x 36"D Conference Table Tops. For Conference Table Tops where Three or Four Bases are Required, order Two CB-A for the End Bases and CB-D for the Center Base(s). HALF ROUND FOR 6' TOPS ONLY CBD-B $ 1,093 8"W x 8"D Wire Access Door Option HALF ROUND CB-B $ 1,215 8"W x 8"D Wire Access Door Option NOTE: Cannot be used with Conference Table Tops less than 8' in Length. For Conference Table Tops where Three or Four Bases are Required, order Two CB-B for the End Bases and CB-Y for the Center Base(s). U-SHAPED CB-C $ 1,580 Black Vein Line, no Brass Center Black Metal Panel NOTE: Cannot be used with Conference Table Tops less than 8' in Length. For Conference Table Tops where Three or Four Bases are Required, order Two CB-C for the End Bases and CB-D for the Center Base(s). Finish Wire Access Door RA No Wire Access Door - Standard RB Wire Access Door $171 SPECIFY: Finish wire access door. See page 184 for the designator finish name. CB-A Finish MHM Wire Access Door RA 222 ofs.com 2017

53 BASE STANDARD FEATURES Adjustable Levelers NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. SINGLE PANEL CB-D $ 1,338 Black Vein Line, no Brass Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" Notches in Top for Pass-Thru Wire Management NOTE: Cannot be used with Conference Table Tops less than 8' in Length ELLIPSE CB-24EB $ 1,324 Ellipse Base Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTE: Cannot be used with Conference Table Tops less than 8' in Length SMALL CYLINDER FOR 36"D TOPS CB-F $ 1,215 Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" Notches in Top for Pass-Thru Wire Management NOTES: Use with 36" Round and 36" Square Conference Table Tops only All Round and Square Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Dry Sand in Clear 6ml Bags with CB-F Base. Finish SPECIFY: Finish. See page 184 for the designator finish name. CB-D Finish MHM ofs.com

54 BASE STANDARD FEATURES Adjustable Levelers Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. CYLINDER CBH-F $ 1,277 Notches in Top for Pass-Thru Wire Management 8"W x 8"D Wire Access Door Option NOTES: Use with 42" and 48" Round and Square Conference Table Tops. Use with 14' and 16' Conference Table Tops. Cannot be used with 36" Round or Square Conference Tops. Not recommended for use with 6', 8', 10' or 12' Conference Tops. For 54" and 59.5" Round and Square Conference Tops, use CBU-F below. All Round and Square Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight. CYLINDER CBU-F $ 1,324 Notches in Top for Pass-Thru Wire Management 8"W x 8"D Wire Access Door Option NOTES: Use with 54" and 59.5" Round and Square Conference Table Tops. Use with 16' Conference Table Tops. All Round and Square Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight. DUNCAN PHYFE CB-L $ 1,570 Brass Toe Caps Not available in Finishes NOTES: Use with Round or Square Conference Table Tops. Use with 14' or 16' Conference Table Tops. Not recommended for 6', 8', 10' or 12' Conference Table Tops Finish Wire Access Door (CBH-F and CBU-F only) RA No Wire Access Door - Standard RB Wire Access Door $171 SPECIFY: Finish wire access door (if applicable). See page 184 for the designator finish name. CBH-F Finish MHM Wire Access Door (CBH-F and CBU-F only) RA 224 ofs.com 2017

55 BASE STANDARD FEATURES Black Reveal at Bottom Adjustable Levelers Overall Height with Top " Notches in Top for Pass-Thru Wire Management 8"W x 8"D Wire Access Door Option NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. All Round and Square Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. CYLINDER CB-M $ 1,363 Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTES: Use with 42" and 48" Round and Square Conference Table Tops. Use with 14' and 16' Conference Table Tops. Cannot be used with 36" Round or Square Conference Tops. Not recommended for use with 6', 8', 10' or 12' Conference Tops. For 54" and 59.5" Round and Square Conference Tops, use CBU-M below. CYLINDER CBU-M $ 1,527 Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 54" and 59.5" Round and Square Conference Table Tops. Use with 16' Conference Table Tops. Finish Wire Access Door RA No Wire Access Door - Standard RB Wire Access Door $171 SPECIFY: Finish wire access door. See page 184 for the designator finish name. CB-M Finish MHM Wire Access Door RA ofs.com

56 BASE STANDARD FEATURES Adjustable Levelers Overall Height with Top " Notches in Top for Pass-Thru Wire Management NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. CROSS CB-Q $ 1,173 Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTE: Not recommended for use with 6', 8', 10' or 12' Conference Table Tops. For 36" Round and Square Conference Table Tops, use CBD-Q below. For 54" and 59.5" Round and Square Conference Table Tops, use CBU-Q below. CROSS CBD-Q $ 1,173 Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 36" Round and 36" Square Conference Table Tops only CROSS CBU-Q $ 1,206 Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 54" and 59.5" Round and Square Conference Table Tops only Finish SPECIFY: Finish. See page 184 for the designator finish name. CB-Q Finish MHM 226 ofs.com 2017

57 BASE STANDARD FEATURES Adjustable Levelers Overall Height with Top " Notches in Top for Pass-Thru Wire Management NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. CYLINDER CB-R $ 1,544 Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" 8"W x 8"D Wire Access Door Option Not available in Finishes NOTES: Use with 42" and 48" Round and Square Conference Table Tops. Use with 14' and 16' Conference Table Tops. Cannot be used with 36" Round or Square Conference Table Tops. Not recommended for use with 6', 8', 10' or 12' Conference Table Tops. For 54" and 59.5" Round and Square Conference Table Tops, use CBU-R below. All Round and Square Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight. CYLINDER CBU-R $ 1,704 Arm Clearance: " Top-28.75" 2" Top-28" 8"W x 8"D Wire Access Door Option Not available in Finishes NOTES: Use with 54" and 59.5" Round and Square Conference Table Tops. Use with 16' Conference Table Tops. All Round and Square Conference Tops require Additional Weight in the Base when using Cylinder Bases to prevent the Table from tipping over. OFS provides Instruction Sheets and Clear 6ml Bags with Base. Customer must provide Dry Sand for the Additional Weight. TRADITIONAL PANEL CB-S $ 992 Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTE: Cannot be used with Round or Square Conference Table Tops. For 6' Conference Table Tops, use CBD-S on page 228. Finish Wire Access Door (CB-R and CBU-R only) RA No Wire Access Door - Standard RB Wire Access Door $171 SPECIFY: Finish wire access door (if applicable). See page 184 for the designator finish name. CB-R Finish MHM Wire Access Door (CB-R and CBU-R only) RA ofs.com

58 BASE STANDARD FEATURES Adjustable Levelers Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. TRADITIONAL PANEL FOR 36"D X 72"W TOP CBD-S $ 992 Notches in Top for Pass-Thru Wire Management NOTE: Use with 72"W x 36"D Conference Table Tops only QUEEN ANNE CB-T $ 1,402 Not available in Finishes NOTE: Not recommended for 6', 8', 10' or 12' Conference Table Tops DOUBLE COLUMN PANEL CB-U $ 1,138 Notches in Top for Pass-Thru Wire Management Not available in Finishes NOTE: Cannot be used with Round or Square Conference Table Tops. Cannot be used with Conference Table Tops less than 8' in Length. For 6' Conference Table Tops, use CBD-U below. DOUBLE COLUMN PANEL FOR 36"D X 72"W TOP CBD-U $ 1,138 Notches in Top for Pass-Thru Wire Management Not available in Finishes NOTE: Use with 72"W x 36"D Conference Table Tops only Finish SPECIFY: Finish. See page 184 for the designator finish name. CBD-S Finish MHM 228 ofs.com 2017

59 BASE STANDARD FEATURES Adjustable Levelers Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. DOUBLE COLUMN PANEL CB-2V $ 1,366 Packed Two per Carton Not available in Finishes NOTE: Cannot be used with Conference Table Top less than 8' in Length. For Conference Table Tops where Three or Four Bases are Required, order Two CB-2V for the End Bases and CB-U for the Center Bases(s). TRIPLE COLUMN PANEL CB-3V $ 2,037 Packed Three per Carton Not available in Finishes NOTE: For Round and Square Conference Tables Tops. Cannot be used with 36" Round or Square Conference Table Tops. PANEL CB-Y $ 728 NOTE: Cannot be used with Round or Square Conference Table Tops. For 6' Conference Table Tops, use CBD-Y below. Finish SPECIFY: Finish. See page 184 for the designator finish name. CB-2V Finish MHM ofs.com

60 BASE STANDARD FEATURES Adjustable Levelers Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. PANEL FOR 36" X 72" TOP CBD-Y $ 728 NOTE: Use with 72"W x 36"D Conference Table Tops only HALF COLUMN CB $ 1,073 Removable Wire Access Panel Notched at Top and Bottom for Pass-Thru Wire Management NOTE: Use CB-02 for Center Pedestal(s) where Three or Four Bases are Required FULL COLUMN CB $ 1,294 THICK CBD $ 686 Removable Wire Access Panel on One Side and Notched at Top for Pass-Thru Wire Management on Other Side NOTE: Use with 72"W Rectangular and Racetrack Tops CB $ 795 Removable Wire Access Panel on One Side and Notched at Top for Pass-Thru Wire Management on Other Side NOTE: Use with 96", 120", 144", 168" and 192"W Rectangular, Boat Shaped and Racetrack Tops Finish SPECIFY: Finish. See page 184 for the designator finish name. CBD-Y Finish MHM 230 ofs.com 2017

61 BASE STANDARD FEATURES Vein-Lined Full Access Door Adjustable Levelers Overall Height with Top " Notches in Top for Pass-Thru Wire Management NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. PANEL CB $ 1,255 Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTE: Cannot be used with Round or Square Conference Table Tops. Not recommended for use with 6' Conference Table Tops. COLUMN CBH $ 1,255 Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTE: Cannot be used with Round or Square Conference Table Tops. Not recommended for use with 6' Conference Table Tops. Use as Center Base only with Two CB-03 for 10' Conference Table Tops. COLUMN CB $ 1,195 Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 36" Round and 36" Square Conference Table Tops only COLUMN CBH $ 1,195 Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 42" and 48" Round and Square Conference Table Tops. Use with 14' and 16' Conference Table Tops. Finish SPECIFY: Finish. See page 184 for the designator finish name. CB-03 Finish MHM ofs.com

62 BASE STANDARD FEATURES Full Access Door Adjustable Levelers Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" Notches in Top for Pass-Thru Wire Management NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. COLUMN CBU $ 1,247 Vein-Lined NOTE: Use with 54" and 59.5" Round and Square Conference Table Tops. Use with 16' Conference Table Tops. PANEL CB $ 1,164 NOTE: Cannot be used with Round or Square Conference Table Tops. Not Recommended for use with 6' Conference Table Tops. COLUMN CBH $ 1,164 NOTE: Cannot be used with Round or Square Conference Table Tops. Not Recommended for use with 6' Conference Table Tops. Use as Center Base only with Two CB-05 for 10' Conference Table Tops. Finish SPECIFY: Finish. See page 184 for the designator finish name. CBU-04 Finish MHM 232 ofs.com 2017

63 BASE STANDARD FEATURES Full Access Door Adjustable Levelers Overall Height with Top " Notches in Top for Pass-Thru Wire Management NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. COLUMN CB $ 1,148 Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 36" Round and Square Conference Table Tops COLUMN CBH $ 1,148 Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 42" or 48" Round and Square Conference Table Tops. Use with 14' and 16' Conference Table Tops. COLUMN CBU $ 1,376 Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTE: Use with 54" and 59.5" Round and Square Conference Table Tops. Use with 16' Conference Table Tops. Finish SPECIFY: Finish. See page 184 for the designator finish name. CB-06 Finish MHM ofs.com

64 BASE STANDARD FEATURES NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. ELLIPSE CB $ 971 Ellipse Base with Aluminum End Caps Removable Panel for Wire Access Adjustable Levelers Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" COLUMN WITH SATIN DISC CHB $ 735 Satin Column Satin Disc Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 36" Round and Square Tops only COLUMN WITH POLISHED CHROME DISC CHB $ 735 Satin Column Polished Chrome Disc Overall Height with Top " Arm Clearance: " Top-28.75" 2" Top-28" NOTE: Use with 36" Round and Square Tops only Finish (CB-11 only) SPECIFY: Finish. See page 184 for the designator finish name. CB-11 Finish (CB-11 only) MHM 234 ofs.com 2017

65 BASE STANDARD FEATURES Adjustable Levelers NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. METAL CROSS CBM $ 785 Black Powder Coat Overall Height with Top 30" Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" NOTE: Use with 36", 42" and 48" Round and Square Conference Table Tops. Use with 14' and 16' Conference Table Tops. METAL T MTB $ 240 For Rectangular, Boat-Shaped and Racetrack Tops Arm Clearance 27.75" METAL X MXB $ 249 For 36" and 42"W Tops Arm Clearance 27.75" Metal Color (MTB2 and MXB-32 only) RC Black RD Pewter SPECIFY: Metal color (if applicable). CBM-07 Metal Color (MTB2 and MXB-32 only) RD ofs.com

66 BASE STANDARD FEATURES Adjustable Levelers Arm Clearance 27.75" NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. METAL X TSX $ 626 For 48" Round and Square and 54" Round Tops METAL X4 MX $ 723 For 36" and 42"W Tops METAL X4 MX $ 911 For 48", 54" and 59.5"W Tops Metal Color TSX38 WHT Arctic White BWT Bone White MSL Luster Grey PBN Natural H1P Oiled Bronze BKO Onyx MTS Slate H1F Warm Grey Glide/Caster (TSX38 only) A4F Glides - Standard A6C Black Dual Wheel Casters $75 MX4-30, MX4-38 RC Black RD Pewter SPECIFY: Metal color glide/caster (if applicable). TSX38 Metal Color MSL Glide/Caster (TSX38 only) A4F 236 ofs.com 2017

67 BASE STANDARD FEATURES Adjustable Levelers Arm Clearance 28.25" NOTES: Price Listed is the Single Base Price. Refer to the Base Option Guide on pages for the Number of Bases to Specify for Your Selected Conference Top. The Overall Height includes a Support Panel and Levelers at Lowest Point. Levelers can increase Height up to One Additional Inch. METAL CIRCULAR MCB $ 737 For 36" and 42"W Round Tops, 72" Rectangular and Racetrack Tops and for 96"W Rectangular, Boat-Shaped and Racetrack Tops 4" Diameter Post METAL CIRCULAR MCB $ 895 For 36" and 42"W Square Tops, 48" and 54" Round Tops and for 120", 144", 168" and 192"W Rectangular, Boat-Shaped and Racetrack Tops 6" Diameter Post METAL LEG MLX-1 Black, Set of Four $ 648 MLC-1 Satin Nickel, Set of Four $ 648 For Round and Square Tops 5"W x 5"D Connector Plate Leg is 2.5" Diameter at the Top, Tapering to Approximately 1" Diameter at the Bottom Metal Color (MCB-23 and MCB-28 only) WHT Arctic White BWT Bone White MSL Luster Grey PBN Natural H1P Oiled Bronze BKO Onyx MTS Slate H1F Warm Grey SPECIFY: Metal color (if applicable). MCB-23 Metal Color (MCB-23 and MCB-28 only) BKO ofs.com

68 CONFERENCE TABLES PANEL BEAM BASE STANDARD FEATURES Two Panel Bases Full Access Door Support Beams Replace Center Base and create a Power/Data Channel Overall Height with Top " Shipped KD Arm Clearance: " Top-28.75" 2" Top-28" 3.75" Top-26.25" CB-05BK $ 4,172 Use with 120"W x 48"D Top, 60.5" B/Bases CB-05BK $ 4,484 Use with 144"W x 48"D Top, 84.5" B/Bases CB-05BK $ 4,794 Use with 168"W x 48"D Top, 108.5" B/Bases CB-05BK $ 5,102 Use with 192"W x 48"D Top, 132.5" B/Bases Finish SPECIFY: Finish. See page 184 for the designator finish name. CB-05BK8027 Finish MHM 238 ofs.com 2017

69 POWER CUTOUT LOCATIONS To order, add location code(s) to model number. Example: CT BT MLC DW B7G Model Number Finish Edge Power Cutout NO CUTOUT QR No cutout POWER CUTOUTS WHEN USED WITH BEAM BASES ONLY (Page 238) B7G Center B7G B7H Left side B7J Right side B7H B7J B7K Centered in left side B7L Centered in right side B7K B7L B7M 2 cutouts in left side B7N 2 cutouts in right side B7M B7M B7N B7N B7H Left side B7J Right side B7K Centered in left side B7L Centered in right side B7H B7J B7K B7L B7M 2 cutouts in left side B7N 2 cutouts in right side B7M B7M B7N B7N Note: For a tapered top the left side location is at the narrow end. ofs.com

70 POWER CUTOUT LOCATIONS To order, add location code(s) to model number. Example: CT1-36-4G MHM EH QV Model Number Finish Edge Power Cutout NO CUTOUT QR No cutout POWER CUTOUTS BETWEEN BASES QS Between 1st Base and 2nd Base QT Between 2nd Base and 3rd Base QU Between 3rd Base and 4th Base QS QS QT QS QT QU QS QT QS QU QS QS QT POWER CUTOUTS OVER BASES QV Over 1st Base QW Over 2nd Base QX Over 3rd Base QV QV QW QV QX QV QW QV QW QX QV QV QW QV QW QX QV QW QY Over 4th Base QV QW QV QW QX QY 240 ofs.com 2017

71 POWER SUPPLY AND BASE MATRIX The Power Supplies pages can be used centered over select bases or between bases. When ordering power supply centered over base(s), refer to matrix for applicability. Y = Can use standard base M = Base must be a modification X = Not Applicable PS will not work over base *PS-12 and PS-41 will fit over this base if the Power Supply is rotated. Both the base and the corresponding top will need to be modified - the base to accept power supply and the top to have the cutout rotated. Description Model No. PS-12, PSH-12 PS-37 PS-38 PSH-16PP PS-41 PS-43 PS-61W PS-61W-BC PS-66B PS-66S PS-67B PS-67S PS-68B PS-68S PS-69B PS-69S PS-70B PS-70S Curved CB-A X X X X X X X X X X Half Round CBD-B X X Y X X Y Y M M X Half Round CB-B M* X Y M* M Y Y M M M Curved CB-C X X X X X X X X X X Panel CB-D X X X X X X X X X X Ellipse CB-24EB X X X X X Y X X X X Cylinder CB-F M M Y M M Y Y M M M Cylinder CBH-F M M Y M M Y Y M M M Cylinder CBU-F M M Y M M Y Y M M M Duncan Phyfe CB-L X X X X X X X X X X Cylinder CB-M M M Y M M Y Y M M M Cylinder CBU-M M M Y M M Y Y M M M Cross CB-Q X X X X X Y X X X X Cross CBD-Q X X X X X Y X X X X Cross CBU-Q X X X X X Y X X X X Cylinder CB-R M M Y M M Y Y M M M Cylinder CBU-R M M Y M M Y Y M M M Panel CB-S X X X X X X X X X X Panel CBD-S X X X X X X X X X X Queen Anne CB-T X X X X X X X X X X Panel CB-U X X X X X X X X X X Panel CBD-U X X X X X X X X X X Panel CB-2V X X X X X X X X X X Panel CB-3V X X X X X X X X X X Panel CB-Y X X X X X X X X X X Panel CBD-Y X X X X X X X X X X Half Column CB-01 X X X X X Y X X X X Full Column CB-02 X X Y M* X Y M M M X Column CB-03 X X Y M* X Y Y M M X Column CBH-03 Y X Y M* M Y Y Y Y M Column (Square) CB-04 M M Y X M Y Y M M M Column (Square) CBH-04 M M Y M M Y Y M M M Column (Square) CBU-04 M M Y M M Y Y M M M Column CB-05 X X Y M* X Y Y M M X Column CBH-05 Y X Y M* M Y Y Y Y M Column (Square) CB-06 M M Y X M Y Y M M M Column (Square) CBH-06 M M Y M M Y Y M M M Column (Square) CBU-06 M M Y M M Y Y M M M Ellipse CB-11 X X X X X Y X X X X PS-71B PS-71S ofs.com

72 POWER SUPPLY AND BASE MATRIX The Power Supplies pages can be used centered over select bases or between bases. When ordering power supply centered over base(s), refer to matrix for applicability. Y = Can use standard base M = Base must be a modification X = Not Applicable PS will not work over base *PS-79B, PS-79S, PS-80B and PS-80S will fit over this base if the Power Supply is rotated. Both the base and the corresponding top will need to be modified - the base to accept power supply and the top to have the cutout rotated. Description Model No. PS-72 PS-73 PS-74 PS-75 PS-78 PS-79B PS-79S PS-80B PS-80S PS-81B PS-81S PS-83WA PS-83WA-BC PS-88W PS-88B PS-88W-BC PS-88B-BC PS-89W PS-89W-BC Curved CB-A X X X X X X X X X X Half Round CBD-B Y Y M X M* X Y Y Y Y Half Round CB-B Y Y M M* M* X Y Y Y Y Curved CB-C X X X X X X X X X X Panel CB-D X X X X X X X X X X Ellipse CB-24EB Y Y X X X X Y X Y Y Cylinder CB-F Y Y M X M X Y M Y Y Cylinder CBH-F Y Y M M M M Y M Y Y Cylinder CBU-F Y Y M M M M Y M Y Y Duncan Phyfe CB-L X X X X X X X X X X Cylinder CB-M Y Y M M M M Y M Y Y Cylinder CBU-M Y Y M M M M Y M Y Y Cross CB-Q X X X X X X X X X Y Cross CBD-Q X X X X X X X X X Y Cross CBU-Q X X X X X X X X X Y Cylinder CB-R Y Y M M M M Y M Y Y Cylinder CBU-R Y Y M M M M Y M Y Y Panel CB-S X X X X X X X X X X Panel CBD-S X X X X X X X X X X Queen Anne CB-T X X X X X X X X X X Panel CB-U X X X X X X X X X X Panel CBD-U X X X X X X X X X X Panel CB-2V X X X X X X X X X X Panel CB-3V X X X X X X X X X X Panel CB-Y X X X X X X X X X X Panel CBD-Y X X X X X X X X X X Half Column CB-01 Y Y X X X X Y Y Y Y Full Column CB-02 Y Y X M* M X Y Y Y Y Column CB-03 Y Y M M* M X Y M* Y Y Column CBH-03 Y Y Y M Y Y Y Y Y Y Column (Square) CB-04 Y Y M X M X Y M Y Y Column (Square) CBH-04 Y Y M M M M Y M Y Y Column (Square) CBU-04 Y Y M M M M Y M Y Y Column CB-05 Y Y M M* M X Y M* Y Y Column CBH-05 Y Y Y M Y Y Y Y Y Y Column (Square) CB-06 Y Y M X M X Y M Y Y Column (Square) CBH-06 Y Y M M M M Y M Y Y Column (Square) CBU-06 Y Y M M M M Y M Y Y Ellipse CB-11 Y Y X X X X Y X Y Y Grommet 242 ofs.com 2017

73 POWER SUPPLY STANDARD FEATURES UL Listed PS-41 SILVER $ 916 Side by Side (Accessible from Both Sides) Anodized Aluminum Finish Two 15 Amp Outlets Each Side Two Blank Data Ports Each Side 72"W Power Cord Each Side UL Listed PS-43 SILVER $ 677 Front and Back (Accessible from Both Sides) Anodized Aluminum Finish Two 15 Amp Outlets Each Side Two Blank Data Ports Each Side 72"W Power Cord Each Side UL Listed PS-55 BLACK $ 171 PS-55W WHITE $ 171 Mounts below Worksurface Mounting Bracket Included Two 12 Amp Power Outlets (Front) One Power Outlet (Back) Two 2.1 Amp USB Charging Ports 10' Power Cord PS-61W WHITE $ 312 Requires Cutout to be machined at Factory - Contact Your Customer Service Representative for Ordering Information Two 15 Amp Outlets Two 2.1 Amp USB Charging Ports One Open Data Port 6' Power Cord NOTE: Use with RJ-11 or RJ-45 Data Jacks PS $ 131 Requires Cutout to be machined at Factory - Contact Your Customer Service Representative for Ordering Information Black Pop-Up Power Supply Two 12 Amp Outlets Two 2.1 Amp USB Charging Ports 10' Power Cord PS $ 86 Requires Cutout to be Machined at Factory - Contact Your Customer Service Representative for Ordering Information Black Pop-Up Power Supply Two 12 Amp Outlet One RJ-45 Data Jack 10' Power Cord POWER INSERTS RJ-11 Voice Hard Wire Jack n/a n/a n/a n/a n/a $ 35 RJ-45 Voice and Data Hard Wire Jack n/a n/a n/a n/a n/a $ 34 Black Only NOTE: Use with PS-61W only PS $ 148 Black Power Supply Mounts below Worksurface Mounting Tabs on Short Sides (Screws not included) Six 12 Amp Outlets Overload Switch Surge Protection Aluminum Housing 10' Power Cord PS-41 ofs.com

74 POWER SUPPLY STANDARD FEATURES UL Listed PS-71B Black $ 741 PS-71S Silver $ 741 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information Anodized Aluminum Finish SIDE 1: SIDE 2: Two 12 Amp Outlets Two 12 Amp Outlets One 4.2 Amp USB Module with Two Ports One 4.2 Amp USB Module with Two Ports One VGA Coupler One HDMI Coupler 10' Power Cord 9' Power Cord PS-74 Black $ 111 Requires Cutout to be machined at Factory - Contact your Customer Service Representative for Ordering Information Two 15 Amp Outlets 10' Power Cord PS-75 Black $ 151 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information One 15 Amp Outlet 10' Power Cord One 4.2 Amp USB Module with Two Ports PS $ 489 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information Hinged Lid with Cord Management when Closed Anodized Aluminum Finish Pass Thru Wire Management Area Two 15 Amp Outlets Two 2.1 Amp USB Charging Ports One Open Data Port 6' Power Cord PS-79B Black $ 1,221 PS-79S Silver $ 1,221 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information One Touch Open and Close Safety Photo Electronic Eye Prevents Rotation when Unit is being Used Anodized Aluminum Finish Three 15 Amp Outlets One CAT6 Data Module One HDMI Port One 3.5mm Audio Module One Two Port USB Charging Port One VGA Port 12' Power Cord PS-80B Black $ 1,088 PS-80S Silver $ 1,088 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information One Touch Open and Close Safety Photo Electronic Eye Prevents Rotation when Unit is being Used Anodized Aluminum Finish Two 15 Amp Outlets One HDMI Port One 2.1 Amp Port USB Charging Port 12' Power Cord PS-37 Black $ 2,092 PS-38 Silver $ 2,106 Requires Cutout to be Machined at a Factory - Contact your Customer Service Representative for Ordering Information Six 12 Amp Power Outlets Two RJ-45 Cat6 Data Jacks One HDMI Port One VGA Port One Mini Stereo 10' Power Cord PS-81B Black $ 1,555 PS-81S Silver $ 1,555 Requires Cutout to be Machined at a Factory - Contact your Customer Service Representative for Ordering Information Six 12 Amp Power Outlets Two 2 Port 4.2 Amp USB Charging Ports One HDMI Port One VGA Port RJ-11 Voice Jack RJ-45 Cat6 Data Jack 10' Power Cord PS-71B 244 ofs.com 2017

75 POWER SUPPLY STANDARD FEATURES PS-87W WHITE $ 652 PS-87B BLACK $ 652 Mobile Table Top Unit One Power Outlet One USB Charging Port Bluetooth Speaker 10' Power Cord UL Listed PS-88W WHITE $ 652 PS-88B BLACK $ 652 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information One Power Outlet One USB Charging Port Bluetooth Speaker 10' Power Cord UL Listed PS-89W WHITE $ 239 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information One Power Outlet Two USB Charging Port 6' Power Cord UL Listed POWER SUPPLY WITH BRAIDED CORD PS-61W-BC WHITE $ 373 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information Two 15 Amp Outlets Two 2.1 Amp USB Charging Ports One Open Data Port 6' Braided Power Cord UL Listed NOTE: Use with RJ-11 or RJ-45 Data Jacks POWER SUPPLY WITH BRAIDED CORD PS-87W-BC WHITE $ 858 PS-87B-BC BLACK $ 858 Mobile Table Top Unit One Power Outlet One USB Charging Port Bluetooth Speaker 10' Braided Power Cord UL Listed POWER SUPPLY WITH BRAIDED CORD PS-88W-BC WHITE $ 858 PS-88B-BC BLACK $ 858 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information One Power Outlet One USB Charging Port Bluetooth Speake 10' Braided Power Cord UL Listed POWER SUPPLY WITH BRAIDED CORD PS-89W-BC WHITE $ 316 Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information One Power Outlet 6' Braided Power Cord UL Listed Two USB Charging Port Cord (Available on PS-61W-BC, PS-87W-BC, PS-87B-BC, PS-88W-BC, PS-88B-BC and PS-89W-BC) BC1 Dusk BC4 Brass BC5 Peacock BC15 Zig Zag Fog/Storm BC17 Zig Zag Berry/Poppy BC18 Chevron Black/White SPECIFY: Cord PS-61W-BC Cord (Available on PS-61W-BC, PS-87W-BC, PS-87B-BC, PS-88W-BC, PS-88B-BC and PS-89W-BC) BC1 ofs.com

76 POWER SUPPLY STANDARD FEATURES model body finish w d h wt cu ft list PS-90B BLACK $ 1,165 PS-90F FOG $ 1,165 PS-90S STORM $ 1,165 PS-90W WHITE $ 1,165 UL Listed Body Finish Shown in Shaded Area Accent Finish Shown in Shaded Area Power Accent Finish Cord When PS-90B is specified: X9 No Lower Power Outlet - Standard 10' Cord Top: One 15 Amp Outlet Two 2.1 Amp USB Charging Ports One 18 WATT USB-C Charging Port H8P Black H8N Fog H8Q Storm X9 No Cord (H7S only) H7U Standard Black Cord No Braid X9 No Cord (H7S only) H7U Standard Black Cord No Braid X9 No Cord (H7S only) H7U Standard Black Cord No Braid BC8 Black Braid $54 BC14 Pinstripe Black-White Braid $54 BC8 Black Braid $54 BC6 Fog Braid $54 BC8 Black Braid $54 BC4 Brass Braid $54 BC18 Chevron Black-White Braid $54 BC18 Chevron Black-White Braid $54 When PS-90F is specified: H8R Berry X9 No Cord (H7S only) H7T Standard White Cord No Braid BC4 Brass Braid $54 BC6 Fog Braid $54 BC7 Berry Braid $54 H7Q Two Lower Power Outlets $13 10' Cord Top: One 15 Amp Outlet Two 2.1 Amp USB Charging Ports One 18 WATT USB-C Charging Port H8P Black H8X Honey H8W Peacock X9 No Cord (H7S only) H7T Standard White Cord No Braid X9 No Cord (H7S only) H7T Standard White Cord No Braid X9 No Cord (H7S only) H7T Standard White Cord No Braid BC6 Fog Braid $54 BC14 Pinstripe Black-White Braid $54 BC4 Brass Braid $54 BC6 Fog Braid $54 BC6 Fog Braid $54 BC5 Peacock Braid $54 BC15 Zig Zag Fog-Storm Braid $54 BC18 Chevron Black-White Braid $54 BC2 Poppy Braid $54 BC18 Chevron Black-White Braid $54 H8U Poppy X9 No Cord (H7S only) H7T Standard White Cord No Braid BC6 Fog Braid $54 BC10 Storm Braid $54 BC19 Chevron Poppy-Fog Braid $54 H8Q Storm X9 No Cord (H7S only) H7T Standard White Cord No Braid BC1 Dusk Braid $54 BC10 Storm Braid $54 BC15 Zig Zag Fog-Storm Braid $54 H7R Three Lower Power Outlets $37 10' Cord Top: One 15 Amp Outlet Two 2.1 Amp USB Charging Ports One 18 WATT USB-C Charging Port H8V White When PS-90S is specified: H8P Black X9 No Cord (H7S only) H7T Standard White Cord No Braid X9 No Cord (H7S only) H7T Standard White Cord No Braid BC5 Peacock Braid $54 BC14 Pinstripe Black-White Braid $54 BC8 Black Braid $54 BC10 Storm Braid $54 BC19 Chevron Poppy-Fog Braid $54 BC18 Chevron Black-White Braid $54 H8N Fog X9 No Cord (H7S only) H7T Standard White Cord No Braid BC6 Fog Braid $54 BC10 Storm Braid $54 BC15 Zig Zag Fog-Storm Braid $54 When PS-90W is specified: H7S Battery Operated $991 No Cord Top: Three 2.1 Amp USB Charging Ports One 18 WATT USB-C Charging Port H8R Berry H8S Dusk H8N Fog X9 No Cord (H7S only) H7T Standard White Cord No Braid X9 No Cord (H7S only) H7T Standard White Cord No Braid X9 No Cord (H7S only) H7T Standard White Cord No Braid BC7 Berry Braid $54 BC4 Brass Braid $54 BC4 Brass Braid $54 BC1 Dusk Braid $54 BC7 Berry Braid $54 BC6 Fog Braid $54 BC2 Poppy Braid $54 BC10 Storm Braid $54 BC15 Zig Zag Fog-Storm Braid $54 H8T Navy X9 No Cord (H7S only) BC4 Brass Braid $54 BC3 Navy Braid $54 BC2 Poppy Braid $54 H8Q Storm X9 No Cord (H7S only) H7T Standard White Cord No Braid BC1 Dusk Braid $54 BC10 Storm Braid $54 BC18 Chevron Black-White Braid $54 SPECIFY: Power accent finish cord. PS-90B Power Accent Finish Cord X9 H8P H7U 246 ofs.com 2017

77 GROMMET, POWER AND DATA STANDARD FEATURES PS-12-X Black $ 1,162 PS-12-N Satin Nickel $ 1,891 Standard Four 110 Volt Outlets Four Cat 5e Data Jacks (Two Modules) Four Blank Insert Modules Dual Covers Meet in Center, Slide Down out of the Way Fits into "W x "D Slot 9' Cord Flush Mount PSH-12-X Black $ 1,314 PSH-12-N Satin Nickel $ 2,266 Standard Four 110 Volt Outlets Four Cat 5e Data Jacks (Two Modules) Four Blank Insert Modules Dual Covers Meet in Center, Slide Down out of the Way Fits into "W x "D Slot 9' Hardwire Cord Flush Mount POWER SUPPLY INSERTS FOR PS-12 model 145C5EU-BK Black Single Cat 5e Universal Module $ 44 U2KEY345-BK Black Dual Cat 3 RJ-45 Module $ 78 U2KEY311-BK Black Dual Cat 3 RJ-11 Module $ 78 U1KEY345-BK Black Single Cat 3 RJ-45 Module $ 47 U1KEY311-BK Black Single Cat 3 RJ-11 Module $ 47 2RCA-BK Black Dual RCA Audio Insert Module $ 78 1RCA-BK Black Single RCA Audio Insert Module $ 47 15PIN-BK Black Single 15 Pin Female to Female VGA Module $ 92 1TEL3MM-BK Black Single 3mm (.125") Audio Connector Module $ 47 2TEL3MM-BK Black Dual 3mm (.125") Audio Connector Module $ 78 BL-BK Black Blank Module $ C5EU-BK Black Dual Cat 5e Universal Module $ 73 U2KEY645-BK Black Dual Cat 6 Universal Module $ 133 1SVHS-BK Black Single Super VHS Module $ 102 2F-BK Black Dual F Connector (Coax) Module $ 68 1F-BK Black Single F Connector (Coax) Module $ 53 U1-USB/A-BK Single Keystone USB Type A, F/F (*Adapter only - does not include power source) $ 131 U1-USB/B-BK Single Keystone USB Type B, F/F (*Adapter only - does not include power source) $ 130 U2-USB/A-BK Dual Keystone USB Type A, F/F (*Adapter only - does not include power source) $ 250 U2-USB/B-BK Dual Keystone USB Type B, F/F (*Adapter only - does not include power source) $ 250 U2-USB/AB-BK Dual Keystone 1 each USB Type A and Type B (*Adapter only - does not include power source) list $ 250 HDMI-BK Black Single HDMI Female to Female Module $ 244 Note: *These modules are only adapters and will require post installation connection by an installer or A/V professional to be fully functional. ROUND GROMMET CGB-1 Black $ 38 CGN-1 Satin Silver $ 38 CBB-1 Antique Brass $ 38 Field Installable - for Cutout to be machined at Factory, Contact your Customer Service Representative for Ordering Information Inside Dimensions with Insert.5625" Diameter Inside Dimensions without Insert " Diameter Rectangular Grommet RGB-1 Black $ 63 RGN-1 Nickel $ 63 RGS-1 Antique Brass $ 63 Requires Cutout to be machined at Factory, Contact your Customer Service Representative for Ordering Information Inside Dimensions with Inserts 1.5"W x.75"d Inside Dimensions without Inserts "W x 1.5"D PS-12-X ofs.com

78 VENEER Exposed surfaces are number one select cherry, walnut, maple, or oak veneers. Select straight and quarter grain patterns are used overall to maintain consistency between individual units. TOPS Casegoods tops are " thick. Conference wall components tops are profiled on front side only. Freestanding conference casegoods tops are profiled 3 sides. High pressure laminate tops are available on credenzas and mobile carts. ASSEMBLY Structural joints are secured by 16-gauge steel angle brackets and wood glue blocks. Adjustable levelers feature insert nuts to prevent glide tear out. FINISH The patented Euroluxe finish is a chemically re-engineered Urethane clear coat that preserves the beautiful depth and clarity of OFS' finishes, but allows for much greater performance with chemical and scratch resistance, as well as the complete elimination of dangerous formaldehyde emissions. The Euroluxe finish system achieves indoor air quality standards set by LEED and BIFMA furniture emission standards and allows all products to achieve SCS Global Services' Indoor Advantage Gold Certification. 248 ofs.com 2017