SCREWDRIVERS SCREWDRIVERS. Protwist

Transcription

1 1

2 SCREWDRIVERS SCREWDRIVERS Protwist New design Ergonomy, comfortable handling + 5 handle sizes Ideal combination of torque transmission and screwing speed New materials Moulded polymer handle (polyamide et polyurethane) Resistance, comfortable grip and durable performance New colour code Pictogram associated to colour code for each tip Fast selection of the right screwdriver for the job New range Range of screwdrivers optimized, wider and deeper 179 references 70 tips 11 blade lengths Screwdriver FM AN2,5X75 Protwist Screwdriver (-) 0.4X2.5MM FM AN3,5X75 Protwist Screwdriver (-) 0.6X3.5MM FM AN4X100 Protwist Screwdriver (-) 0.8X4.0MM FM AN5,5X150 Protwist Screwdriver (-) 1.0X5.5MM FM AN6,5X150 Protwist Screwdriver (-) 1.2X6.5MM FM ANF8X200 Protwist Screwdriver (-) 1.2X8.0MM FM AN4X35 Protwist Short Screwdriver (-) 0.8X4.0MM FM AN6,5X35 Protwist Short Screwdriver (-) 1.2X6.5MM Benefits: Ideal combination of torque transmission and screwing speed Great ergonomy : naturally fits in the hand Fast and efficient approach Comfortable powerful screwing Great torque transmission with less effort Five handle sizes to suit the size of the screwdriver tip Thin Body on the small dimensions for an easier fast screw-driving. Power area more developed on the biggest dimensions for a maximised torque transmission Screwdriver FM ANP0X75 Protwist Screwdriver PH0 (+) FM ANP1X100 Protwist Screwdriver PH1 (+) FM ANP2X100 Protwist Screwdriver PH2 (+) FM ANP3X150 Protwist Screwdriver PH3 (+) FM ANP4X200 Protwist Screwdriver PH4 (+) FM ANP1X25 Protwist Short Screwdriver PH1 (+) FM ANP2X35 Protwist Short Screwdriver PH2 (+) FM ANP.J5 Protwist Screwdriver Set 5 pcs (+) FM ANP.J6PB Protwist Screwdriver Set 6 pcs (+) (-) Features: For loosening seized, rusted or stuck fasteners quickly and in complete safety A sharp blow on the end of the handle jerks the bit into rotation to loosen the screw Repeat if necessary, holding the bit firmly engaged in the head pattern to avoid any damage Also suitable for tightening Safety first: - Never use anything but a dead-blow hammer - Wear eye protection. NJ.261M NS.265M Specification : END no. 2-3: Pozidrv bits. ENP no. 2-3: Phillips bits. ENS: mm: Slotted head screw bits. ENH: mm: Hex bits. NJ.236A. NJ.260. Plastic case BP.115. Heat-formed tray PL.72A. FM NJ.261M Impact Screwdriver set Sq 3/8 Specification : 1/2 drive = 12.7 mm. Torque: 400 N.m. END no : Pozidrv bits. ENP no : Phillips bits. ENS no mm: Slotted head screw bits. ENH no mm: Hex bits. ENX no : Torx impact bits. NS.236A: Bit holder impact socket. NS.260A: Impact screwdrivers. Plastic case BP.115. Heat-formed tray PL50A. FM NS.265M Impact Screwdriver Set Sq 1/2 2

3 WRENCHES OPEN END WRENCH Open-end Wrench (mm) FM x7 Open-End Wrench 6x7 FM x9 Open-End Wrench 8x9 FM x11 Open-End Wrench 10x11 FM x13 Open-End Wrench 12x13 FM x15 Open-End Wrench 14x15 FM x17 Open-End Wrench 16x17 FM x19 Open-End Wrench 18x19 FM x22 Open-End Wrench 20x22 FM x23 Open-End Wrench 21x23 FM x24 Open-End Wrench 22x24 FM x28 Open-End Wrench 26x28 FM x29 Open-End Wrench 27x29 FM x32 Open-End Wrench 30X32 FM JE12 Open-End Wrench set 6-32mm (12 pcs) Set metric wrench set (12 pcs) 44-6x7 ; 8x9 ; 10x11 ; 12x13 ; 14x15 ; 16x17 ; 18x19 ; 21x23 ; 22x24 ; 26x28 ; 27x29 ; 30x32 mm JU11A 44-1/2X9/16 ; 1/4X5/16 ; 1 X1 1/16 ; 1 1/8X1 1/4 ; 1 3/8X1 1/2 ; 11/32X13/32 ; 3/4X13/16 ; 3/8X7/16 ; 5/8X11/16 ; 7/8X15/16 ; 1 3/16X1 5/16 COMBINATION WRENCH Combination Wrench 440 More Powerfull Tightening : Reduced stress from larger contact areas and no sharp angles within the tool. Torque transmission through fastener flats. Longer life. Torque capacity exceeds standard specifications ISO , NF ISO , DIN 89 Ideal for very tight fasteners. Versatility Slim ends offer a better compromise between power and accessibility. 30 increments. Side or top approach. Manufacturing centre of excellence The utmost reliability of tools produced at the ISO 9002 approved facility stems from cold forging and repeated stringent checks throughout the manufacturing process. (mm) FM Combination Wrench 6 FM Combination Wrench 7 FM Combination Wrench 8 FM Combination Wrench 9 FM Combination Wrench 10 FM Combination Wrench 11 FM Combination Wrench 12 FM Combination Wrench 13 FM Combination Wrench 14 FM Combination Wrench 15 FM Combination Wrench 16 FM Combination Wrench 17 FM Combination Wrench 18 FM Combination Wrench 19 FM Combination Wrench 20 FM Combination Wrench 21 FM Combination Wrench 22 FM Combination Wrench 23 FM Combination Wrench 24 FM Combination Wrench 25 FM Combination Wrench 26 FM Combination Wrench 27 FM Combination Wrench 28 FM Combination Wrench 29 FM Combination Wrench 30 FM Combination Wrench 32 Metric Combination Wrench Set 8-24 MM FM JE16T Consist of : Content : Roll: N.38A-17A Metric Combination Wrench Set 6-24mm FM JE18 (18 pcs): mm FM JU17T Inch Combination Wrench Set ¼ 1 ¼ (17 pcs) :40-1/4-5/16-11/32-3/8-7/16-1/2-9/16-5/8-11/16-3/4-13/16-7/8-15/ /16-1 1/8-1 1/4 Metric Combination Wrench Set 6-34 MM FM JE25 Consist of : Metric Combination Wrench Set 6-24 MM FM JP12 Consist of : Content : Case CK.440J2 Metric Combination Wrench Set 6-24 MM JP14 Consist of : Content : Case CK.440J3 3

4 WRENCHES FAST COMBINATION WRENCH Fast Combination Wrench Features: 1. Ratchet Effect Open-end configuration for fast rewind. Torque transmission through flats for increased power OGV ring for maximum loosening power 2. Easier Positioning and withdraw 3. 3 Drive surfaces for greater power for more wrench-to-nut contact points. Reduced risk of fastener wear Reduced risk of wrench slippage 4. Twice as fast as a conventional open-end wrench Double Ratchet : Ratchet effect ring and open wrench Durable open end : The open end has a special FACOM design shape guaranteeing high strength and increased longevity Secure Work : High strength mechanism. Built-in switch: avoids any risk of accidental reversing 2-in-1 open end : Open end fully pushed = ratchet effect. Open end semi-engaged = approach phase. Fast work : The ratchet mechanism allows easy tightening without wasting time repositioning the wrench Versatile : Broad range Open end ratchet : 2 in 1. Ring Ratchet. (mm) BR.8 Fas t Open End Ratchet Combination Wrench BR.9 Fast Open End Ratchet Combination Wrench BR.10 Fast Open End Ratchet Combination Wrench BR.11 Fast Open End Ratchet Combination Wrench BR.12 Fast Open End Ratchet Combination Wrench BR.13 Fast Open End Ratchet Combination Wrench BR.14 Fast Open End Ratchet Combination Wrench 14 (mm) BR.16 Fast Open End Ratchet Combination Wrench BR.17 Fast Open End Ratchet Combination Wrench BR.18 Fast Open End Ratchet Combination Wrench BR.19 Fast Open End Ratchet Combination Wrench BR.JP10 Fast Open End Ratchet Combination Wrench Set Consist of : Content : Case CK.467RJ1 Ratchet Combination Wrench Complies with ISO Reversible ratchet system incorporated within a compact ring head 15 degree offset 5 degree increments (6 degree for sizes 8 and 9) Recessed change lever prevents accidental direction change Integral Reversible Ratchet System Facom s new ratchet combination wrench is ideal for reaching into awkward spaces and is easier to use for both tightening and loosening operations Perfectly suited to quick pre-tightening and loosening operations, for maximum productivity, even where access is restricted 5 degree increments (6 degree for sizes 8 and 9) Small increments ensure a better increment-to-performance ratio Particular care has been taken in the design of the new Facom reversible ratchet combination wrench to avoid the risk of accidental reversal. The reversing lever is recessed into the body of the Facom 67 wrench. (mm) FM B.6 Ratchet Combination Wrench 6 FM B.7 Ratchet Combination Wrench 7 467B.7 FM B.8 Ratchet Combination Wrench 8 467B B.9 Ratchet Combination Wrench 9 467B.9 FM B.10 Ratchet Combination Wrench B B.11 Ratchet Combination Wrench B.11 FM B.12 Ratchet Combination Wrench B.12 FM B.13 Ratchet Combination Wrench B B.14 Ratchet Combination Wrench B B.15 Ratchet Combination Wrench B.15 (mm) B.16 Ratchet Combination Wrench B B.17 Ratchet Combination Wrench B B.19 Ratchet Combination Wrench B B.21 Ratchet Combination Wrench B B.22 Ratchet Combination Wrench B.22 FM B.24 Ratchet Combination Wrench B.24 FM B.J7 Ratchet Combination Wrench Set Consist of : FM B.JP10 Ratchet Combination Wrench Set Consist of : COMPACT - Compact reversible ratcheting ring system o offset. - Makes tightening or loosening operations easier. SPEED - Deigned for rapid loosening and tightening operations: optimised productivity even in difficult access applications. - 5 o working arc. SAFETY - Recesses change lever prevents accidental direction change during operation. 4

5 WRENCHES RING WRENCH Offset-Ring Wrench Features: Facom OGV Profile Increased torque Longer tool life Reduced work-hardening in 12-point OGV Ring (mm) FM A.6X7 Offset-Ring Wrench size 6x7 FM A.8x9 Offset-Ring Wrench size 8x9 FM A.10x11 Offset-Ring Wrench size 10X11 FM A.12X13 Offset-Ring Wrench size 12X13 FM A.14x15 Offset-Ring Wrench size 14X15 FM A.16X17 Offset-Ring Wrench size 16X17 (mm) FM A.18x19 Offset-Ring Wrench size 18x19 FM A.20x22 Offset-Ring Wrench size 20x22 FM A.21x23 Offset-Ring Wrench size 21x23 FM A.22X24 Offset-Ring Wrench size 22x24 FM A.26X28 Offset-Ring Wrench size 26x28 FM A.27X29 Offset-Ring Wrench size 27x A.30X32 Offset-Ring Wrench size 30x32 55A.JE12 55A.J1PB Facom OGV Profile Increased torque Longer tool life Reduced work-hardening in 12-point OGV Ring Facom OGV Profile Increased torque Longer tool life Reduced work-hardening in 12-point OGV Ring Specification 55A-JE12 Set of 12 Offset-Ring Wrenches with OGV profile Consist of :55A-6x7 ; 8x9 ; 10x11 ; 12x13 ; 14x15 ; 16x17 ; 18x19 ; 21x23 ; 22x24 ; 26x28 ; 27x29 ; 30x32 mm FM A.JE12 Set of 12 Offset-Ring Wrenches with OGV profile Specification 55-J1PB Set of 9 Offset-Ring Wrenches with OGV profile Consist of :55A-6x7 ; 8x9 ; 10x11 ; 12x13 ; 14x15 ; 16x17 ; 18x19 ; 21x23 ; 22x24 mm J1PB Set of 9 Offset-Ring Wrenches with OGV Profile 55A.JU10 Facom OGV Profile Increased torque Longer tool life Reduced work-hardening in 12-point OGV Ring FM A.JU10 Set of 10 Inch Offset-Ring Wrenches with OGV profile Specification 55A-JU10 Set of 10 Inch Offset-Ring Wrenches with OGV profile Consist of :55A-1/4x5/16 ; 11/32x13/32 ; 3/8x7/16 ; 1/2x9/16 ; 5/8x11/16 ; 19/32x25/32 ; 3/4x13/16 ; 7/8x15/16 ; 1 x1 1/16 x 1 1/8x1 1/4 5

6 WRENCHES AND PLIERS RATCHET RING WRENCH Extra low-profile. Ideal for restricted access work. The compact ring head perfectly replaces the ratchet and socket and provides the same features as an extra low-profile ratchet. Extra narrow (T) for the tightest clearances. Optimised diameter (D) for an unbeatable compact design 5 degree increments. Ideal for low clearance applications. Enables quick tightening and loosening in the most difficult conditions. 4 Piece Metric Ratchet Wrench Set Specification: 64.J4, 4 piece metric ratchet wrench set : 64-10x11 ; 12x13 ; 16x18 ; 17x19 Ratchet Ring Wrench Metric 12 Point Ratchet Ring Wrench Complies with ISO Reversible ratchet system incorporated within a compact ring head 15 degree offset 5 degree increments (6 degree for sizes 8 and 9) Recessed change lever prevents accidental direction change FM X7 Metric 12 Point Ratchet Ring Wrench 6x7mm X9 Metric 12 Point Ratchet Ring Wrench 8x9mm FM X11 Metric 12 Point Ratchet Ring Wrench 8x9mm FM X13 Metric 12 Point Ratchet Ring Wrench 12x13 mm X19 Metric 12 Point Ratchet Ring Wrench 17x19mm FM J4 4 piece metric ratchet wrench set 7 Piece Metric 12 Point Ratchet Ring Wrench Module MOD.64J7, 7 Piece Metric 12 Point Ratchet Ring Wrench Module. Consist of : 64-6x7 ; 8x9 ; 10x11 ; 12x13 ; 14x15 ; 16x18 ; 17x19 Tray PL-608A Compatible with Facom Modular Storage System MOD.64J7 7 Piece Metric 12 Point Ratchet Ring Wrench Module ADJUSTABLE WRENCH Adjustable Wrench Strength to ISO 6787, DIN 3117, NF E ASME B m-1966 (US nat.std) Chromed body and polished jaw faces. Contoured handle ensures increased ease of use. Easier to reach worm screw. Tapered jaw tips for optimum access. Non-protruding moving jaw at maximum capacity. Millimetre graduations for pre-setting jaw opening. Worm rotates clockwise. Sizes from 4 to 24. Patent applied for A.4C Adjustable Wrench 4 FM A.6C Adjustable Wrench 6 FM A.8C Adjustable Wrench 8 FM A.10C Adjustable Wrench 10 FM A.12C Adjustable Wrench 12 FM A.15C Adjustable Wrench 15 FM A.18C Adjustable Wrench 18 FM C.24C Adjustable Wrench 24 PLIER Features for Diagonal Cutters and Combination Pliers: High-frequency hardened cutting edges ensure durable cut quality for hard wire up to 200 kg/mmz. Offset pivot for reduced cutting effort. 4 options: - CPE: Chrome finish, ergonomic grips with return spring. - G: Varnish finish, PVC grips. - VE: Varnish finish, return spring, 1000V insulated grips for electrical safety to EN and A, for working on or near live components. Diagonal Cutter Combination Plier CPE High Performance Wire Cutters 145mm FM CPE High Performance Wire Cutters 160mm FM CPE High Performance Wire Cutters 180mm CPE High Performance Wire Cutters 200mm FM CPE Combination Pliers 165 mm FM CPE Combination Pliers 185 mm FM CPE Combination Pliers 205 mm 6

7 PLIERS PLIERS Lockgrip Plier 510AMP PB Features 510AMP : Unlock trigger allowing smooth & safe release. Easy to use & secure. Usable with 1 hand. Machined groove in upper to grip cylindrical sections, bolt & screw shafts, nails. Chromed finish AMP Lock Grip Plier Single Setting FM PB Lock Grip Plier Multi Purpose Features PB: Suitable for industrial and automotive production and maintenance applications Automatically adjusts the jaws to the component, regardless of size and with the same pressure. Forged in Chrome Molybdenum steel: with treated jaws for longer working life Non-slip chequered handle One-hand unlocking by internal opening lever Finish: chromed, burnished mechanism (patented) Multigrip Pliers 180.CPE 181A.25CPE FM CPE Multigrip Plier Chromed Model 250mm FM A.25CPE Multigrip Plier Varnished Model 250mm Pliers Set Quick, permanent push-button adjustment Teeth self-gripping on pipes, avoid damage to nuts. High frequency induction hardened tips for enhanced wear resistance. Strong double slip joint. High torsion resistance. 8 positions adjustment, opening capacity 68 mm. Safe, built-in finger protection stop. Ergonomic grips designed for maximum comfort. Varnish finish, ergonomic grips. Wire Stripping CPE.1PB FM CPE.1PB Set of 4 Pliers Set, Consist of : 180.CPE Multigrip Pliers ; CPE Cutter ; CPE Universal Pliers ; CPE Half-round Nose Plier FM CPE.3 Set of 3 Pliers Set, Consist of : 180.CPE Multigrip Pliers ; CPE Cutter ; CPE Half-round Nose Plier Crimping Pliers CPE.3 Suitable for single or multi-core cables, self-setting to wire gauge. Stripped-length thumbwheel adjuster. Spare blades 162-L1. Cuts and strips in one go. FM Automatic Side-Entry Wire Strippers 1,5-4mm² FM Automatic Cutting Stripper 0.4-4mm², 160mm Half Round Nose Pliers, Flat-Nose Pliers and Round-Nose Pliers 449B Dual crimp on insulated terminals, to applicable standards, with grip around both conductor and insulation. Stainless steel die. Latch remains accessible. Good grip in the hand. Soft feel. To IEC / IEC Reverse crimping: terminal placed in the fixed part for greater efficiency and precision. Capacity 0.4-6mm² FM Crimping Pliers for Insulated Terminal 0.5-6mm² FM Crimping Pliers for Pre-Insulated Terminal 0.5-6mm² Crimping Pliers for Open Core Connector 1.5-6mm² FM B Standard Crimping Plier For Insulated Terminal 1.5-6mm² 188-CPE 185-CPE 189-CPE 193-CPE Features for Half Round Nose Pliers, Flat-Nose Pliers and Round-Nose Pliers: Serrated jaws for firm grip. Snipe-nose version (E) for confined spaces. 4 options: - CPE: Chrome finish, ergonomic grips, return spring. - G: Varnish finish, PVC grips. - VE: Varnish finish, return spring, 1000V insulated grips for electrical safety to EN and A, for working on or near live components. FM CPE Flat-Nose Plier 168mm FM CPE Flat-Nose Plier 200mm FM CPE Half Round-Nose Plier 200mm FM CPE Half Round-Nose Plier 168mm FM CPE Round-Nose Pliers 170mm 7

8 HACKSAW AND CIRCLIP PLIERS HACKSAW FRAME SAWING Impact-resistant steel/resin construction compact and lightweight. Blade tension 80 kg. 2 blade positions: 45 and 90. Takes 300 mm blade. Dimensions (L. x W.): 385 x 145 mm. Supplied with one blade. Optimum and durable automatic blade tension control at 110 kg. Aluminium bow for maximum stiffness. Ergonomic handle for maximum cutting comfort. 8 blade positions & blade rotation through 360 with out removal. Ultra-fast blade changing. Takes 300 mm blade. Dimensions (L. x W.): 440 x 145 mm. Supplied with one blade. Exact cutting For a perfect tension control (110kg), turn the button till clack Positions FM Compact Hacksaw Frame FM F High Performance Hacksaw Frame CIRCLIP PLIER Circlip Pliers Piano wire tips: - Resistant to deformation - Reinforced to reduce the risk of breakage Colour coded: expansion / compression Increased productivity through quicker identification of the pliers in the tool box Textured, non-slip PVC grips Reduce the risks of tool slipping or dropping from the hand during use For increased comfort during intensive use Easy to clean Narrow head and tips for easy access, even where space is tight A.9 Expansion Snap Ring Pliers 3-10 mm Straight Nose FM A.13 Expansion Snap Ring Pliers mm Straight Nose FM A.18 Expansion Snap Ring Pliers mm Straight Nose FM A.23 Expansion Snap Ring Pliers mm Straight Nose A.9 Expansion Snap Ring Pliers 3-10 mm 45 Angled Nose FM A.13 Expansion Snap Ring Pliers mm 45 Angled Nose FM A.18 Expansion Snap Ring Pliers mm 45 Angled Nose FM A.23 Expansion Snap Ring Pliers mm 45 Angled Nose A.9 Expansion Snap Ring Pliers 3-10 mm 90 Angled Nose A.13 Expansion Snap Ring Pliers mm 90 Angled Nose FM A.18 Expansion Snap Ring Pliers mm 90 Angled Nose FM A.23 Expansion Snap Ring Pliers mm 90 Angled Nose FM A.9 Compression Snap Ring Pliers 8-11 mm Straight Nose FM A.13 Compression Snap Ring Pliers mm Straight Nose FM A.18 Compression Snap Ring Pliers mm Straight Nose FM A.23 Compression Snap Ring Pliers mm Straight Nose FM A.9 Compression Snap Ring Pliers 8-11 mm 45 Angle Nose FM A.13 Compression Snap Ring Pliers mm 45 Angle Nose FM A.18 Compression Snap Ring Pliers mm 45 Angle Nose FM A.23 Compression Snap Ring Pliers mm 45 Angle Nose FM A.9 Compression Snap Ring Pliers 8-11 mm 90 Angle Nose FM A.13 Compression Snap Ring Pliers mm 90 Angle Nose FM A.18 Compression Snap Ring Pliers mm 90 Angle Nose FM A.23 Compression Snap Ring Pliers mm 90 Angle Nose Circlip Interchangeable tips for: - diam. 8 --> 63 mm, for inside circlips. - diam. 3 --> 63 mm, for outside circlips. Including: PA: Inside circlip pliers PA: Outside circlip pliers. - 82H.2.5: Key. - Set of 18 removable tips. - Supplied in a plastic case. FM Inside and Outside Circlip Set 8

9 SOCKET SET & ACCESSORIES SOCKET SET & ACCESSORIES R2NANOPB Specification: 1 x 1/4 Hand-palm ratchet - R x 1/4 6-point metric sockets : R mm. 21 x 1/4 series 1 bits - L 25 mm: Series 1 bits: - ED.1T High Perf bit for Pozidriv screws : PZ1 - PZ2 - PZ3. - EH.1 - Standard bit for hex countersunk screws - metric : EP.1T - High Perf bit for Phillips screws : PH1 - PH2 - PH3. - ES.1T - High Perf bit for slotted head screws : F4.5 - F6.5 - F EXR.1 - Standard for Resistorx screws : TT 10 - TT 15 - TT 20 - TT 25 - TT 27 - TT 30 - TT x 1/4 socket holder bit - ECR. 1 x 1/4 Universal joint - R.240A. 1 x 1/4 bit holder socket with standard locking pin - R x 1/4 short screwdriver handle - R.236C. 2 x 1/4 standard extension L 55 mm - L 100 mm. Sockets are removed with a tilting action Easy to clean Metal hinge rod Self closing, metal catch Plastic case resistant to workshop chemicals FM R2NANOPB Ultra Compact Socket Set Nano Metric 6-Point Sq 1/4 J.161-3P12 Specification: 1 x high performance sealed 3/8 ratchet J.161B. 15 x 3/8 metric 12-point sockets J mm. 2 3/8 extensions: L 125 mm (J.210) - L 250 mm (J.215). 1 x 3/8 universal joint: J.240A. 1 x 3/8 sliding handle: J.120A. Supplied with a set of pictograms to customize your box. Empty case: BP.MBOXM. Thermoformed tray M (309 x 188 mm): PL.M15. J.4APB Specification: 1 x high performance sealed 3/8 ratchet J x 3/8 metric 6-point sockets J. 8H - 9H - 10H - 11H - 12H - 13H - 14H - 15H - 16H - 17H - 18H - 19H - 21H 22H mm. 2 3/8 extensions: L 125 mm (J.210) - L 250 mm (J.215). 1 x 3/8 universal joint: J.240A. S.161-5P12 S.161-3P12U Specification: 1 x high performance sealed 1/2 ratchet S.161B. 24 x 1/2 metric 12-point sockets S mm. 2 x 1/2 extensions: L 130 mm (S.210) - L 250 mm (S.215). 1 x 1/2 universal joint: S.240A. 1 x 1/2 sliding handle: S.120A. 1 x 1/2 speed brace: S.110. Supplied with a set of pictograms to customize your box. Empty case: BP.MBOXL. Thermoformed tray L (420 x 188 mm): PL.L03. Specification: 1 x high performance sealed 1/2 ratchet S.161B. 19 x 1/2 drive inch 12-point sockets: S. 3/8-7/16-1/2-9/16-19/32-5/8-21/32-11/16-3/4-25/32-13/16-7/8-15/16-31/ /16-1 1/8-1 3/16-1 1/4. 2 x 1/2 extensions: L 130 mm (S.210) - L 250 mm (S.215). 1 x 1/2 universal joint: S.240A. 1 x 1/2 sliding handle: S.120A. 1 x 1/2 speed brace: S.110. Supplied with a set of pictograms to customize your box. Empty case: BP.MBOXL. Thermoformed tray L (420 x 188 mm): PL.L06. K.1BPB Specification: 1 x ratchet 3/4 K x 3/4 drive 6-point sockets 22, 24, 27, 30, 32, 34, 36, 41, 46, 50mm. 2 x 3/4 extensions: L 200 mm (K.210B) L 400 mm (K.215B). 1 x 3/4 sliding handle: K.120B Supplied in a steel case J.161-3P12 Socket Set Metric 12-Point Sq 3/8 FM J.4APB Socket Set Metric 6-Point Sq 3/ S.161-5P12 Socket Set Metric 12-Point Sq 1/ S.161-3P12U Socket Set Inch 12-Point Sq 1/2 FM K.1BPB Socket Set Metric 6-Point Sq 3/4 9

10 KEY SETS, PULLERS & RATCHET KEY SETS Hex Key Set FM FM FM FM Torx Key Set 82H.JL12 82H.JU10 83H.JL12 83H.JU10 Steel Hexagonal Keys Wear resistance for longer tool durability Reliable feel giving improved control when tightening or loosening. Performance well in excess of standard specifications (*) allowing more powerful tightening Wallet Sets of Metric Keys mm. Consist of:1, , Wallet Sets of Inch Keys 1/16-3/8. Consist of:1/16-5/64-3/32-1/8-5/32-3/16-7/32-1/4-5/16 3/8- Wallet Long Sets of Metric Keys mm. Consist of :1, , Wallet Long Sets of Inch Keys 1/16-3/8. Consist of :1/16-5/64-3/32-1/8-5/32-3/16-7/32-1/4-5/16 3/8- Steel hexagonal keys Wear resistance for longer tool durability. Reliable feel giving improved control when tightening or loosening. Performance well in excess of standard specifications (*) allowing more powerful tightening JP8A Short Sleeve Torx Key Consist of : T10 - T15 - T20 -T25 - T27 - T30 - T40 T JP8AL Long Sleeve Torx Key Consist of : T10 - T15 - T20 -T25 - T27 - T30 - T40 T45 FM S.JP8A Long Spherical Sleeve Torx Key Consist of : T10 - T15 - T20 -T25 - T27 - T30 - T40 T JL8 Short Wallet Torx Key Consist of : FM JL12 Tee Handle Hex Key Hexagon key profile on all 3 ends provides the option of a longer lever arm The long body provides better access than a conventional hexagon key Easy access to screws requiring depth Sliding cross bar with t handle for better accesibility TCD.J6 T Handle Sliding Hex Key Set Consist of : 2, PULLERS Features: Facom Jp Sleeve Set: Practical And Compact hexagon-key holder Compact sleeve. Hinged flap. Dedicated key space for instant selection and storage. Available for all hexagon and Torx key series. Convenient hanging hole H.JP9A Short Sleeve Set Metric Hexagon Key 1,5-10mm Consist of : FM H.JP9A Long Sleeve Set Metric Hexagon Key 1,5-10mm Consist of : FM SH.JP9A Spherical Head Long Sleeve Set Metric Hexagon Key 1,5-10mm Consist of : FM SH.JP8AU Spherical Head Long Sleeve Set Inch Hexagon Key 3/32 3/8 Consist of : 3/32 + 1/8 + 5/32 + 3/16 + 7/32 + 1/4 + 5/16 + 3/ SH.JP13U Spherical Head Long Sleeve Set Inch Hexagon Key /8 Consist of : /16-5/64 3/32-7/64-1/8-9/64-5/32-3/16-7/32-1/4-5/16-3/8 Tee Handle Key Set RATCHET Wear resistance for longer tool durability Reliable feel giving improved control when tightening or loosening. Performance well in excess of standard specifications (*) allowing more powerful tightening Short Wallet Torx Key Consist of : TZSA.PB T Handle Hex Key Spherical Set Consist of : TXA.PB R.161B, J.161B & S.161B R.161B T Handle Torx Key Set Consist of : T10 - T15 - T20 -T25 T30 S.161B J.161B Safety : fused screw head U.306PB Inside/Outside puller Full locking with hand 2 or 3 legs operating screw Capacity : - Outside 7-140mm, Self crimping Inside mm Self centering Supplied with : Easy move from internal to - 1 Set of 3 legs for outside applications external pulling applications - 1 Set of 3 legs for inside applications FM U.306PB Inside/Outside puller 2 or 3 legs FM U PB Inside/Outside puller 2 or 3 legs Very long durability regardless of working conditions Mechanism sealed to industrial dust 72 tooth mechanism for 5 increments Reversing by rotating cap Ultra-compact head Bi-material elastomer grip: high resistance to abrasion and the most severe workshop solvents Hole in the handle for strapping when working in high places R.161B Ratchet SQ 1/ J.161B Ratchet SQ 3/ S.161B Ratchet SQ 1/2 10

11 RATCHET & HAMMER RATCHET Rotary Handle Ratchet 3/8 fast ratchet with rotating handle: Rotating handle jack: work twice as fast in confined spaces. 6 increments for final tightening. Socket safety locking = no sockets lost in your machines. Palm control system - allows the opera tor to press down on the head avoid ing risk of accidental reverse J.360 Twist Handle Ratchet SQ3/ J.360PACK Socket Set with Twist Handle Ratchet SQ3/8 1 x 3/8 - J.360; 6 x 3/8 6-point metric-size sockets - J.H mm; 1 x 3/8 extension - L 125 mm. Flexible Head 1/2 Locking Extendable Ratchet 1 ratchet instead of 2. Short setting: standard use, easy storage. Long setting: more torque, less effort. Easy to use & strong extension mechanism. Watertight: no maintenance. Provides optimum safety. Very high strength flexible head for maximum accessibility SXL.171 Flexible Head Locking Extendable Ratchet 1/2 208 SERIES TORQUE WRENCH 208 Series Torque Wrench J PB S PB FM S PB Torque Wrench Sq 1/ Nm FM S Torque Wrench Sq 1/ Nm FM J Torque Wrench Sq 3/ Nm S PB Accuracy: ± 4 % in accordance with ISO 6789 Automatic release and reset Fast, accurate vernier setting Positive locking avoids accidentally altering settings Touch-and-sound signals on release: can be used in noisy and poor visibility conditions. Light, compact and reliable Proven reliability 72 tooth (5 increment) ratchet Supplied with inspection report, calibrated in one direction HAMMER Ball Pein Hammer TOOL BOX BT.13A Hammer Tools Safety first. The extensive range, including hammers designed for individual trades, is available with a choice of handles: Hickory: the best possible wood for tool handles, enhanced by the Facom high-safety fit provided by double wood + metal wedging. Ash: The conventional range which largely exceeds standard technical specifications. Precision heat treatment of the head and high quality face finish combine to enhance the safety of Facom hammer users. -- Forged and hardener steel -- High safety wood + metal wedge fit FM H.1/4 Ball Pein, Hickory Handle 0.14 Kg FM H.1/2 Ball Pein, Hickory Handle 0.28 Kg FM H.1 Ball Pein, Hickory Handle 0.56 Kg H.1 1/2 Ball Pein, Hickory Handle 0.84 Kg FM H.2 Ball Pein, Hickory Handle 1.11 Kg Large storage capacity Can take a hacksaw or spirit level Handless pull apart for immediate access to all trays Foam-lined compartment bottoms Padlock claps (padlock not supplied) Bottom bin 518x200x98 mm Trays 526x100x45 mm Capacity 30 kg Volume 18 dm 3 560x220x238 mm; 5 kg FM BT.13A Tool box Extended 5-Trays 11

12 TOOL BOX AND TROLLEY TOOL BOX BT.9 Good size-to-capacity ratio Handles pull apart for immediate access to all trays Padlock clasp (padlock not supplied). Foam-lined compartment bottoms Bottom bin 448 x 205 x 98 mm Trays 448 x 100 x 55 mm Capacity 20 kg Volume 13 dm³ 475 x 220 x 185 mm. D: 3.4 kg Compartment trays are sell separately FM BT.9 Tool Box 3-Trays BT.11A BS.T14PB Two sizes of tool storage Handles pull apart for immediate access to all trays. Foam-lined compartment bottoms Padlock clasp (padlock not supplied) Bottom bin 448 x 200 x 98 mm Trays 448 x 100 x 55 mm Capacity 25 kg. Volume 17 dm³ 475 x 220 x 238 mm FM BT.11A Tool Box 5-Trays Highly resistant 1200 x 1200 denier fabric Rigid, waterproof tool bottom Aluminium handle Leather grip Shoulder strap with reinforced padded shoulder Closing flap Elastic tool retaining strap Special screwdriver partition Easy access to the tool compartment Large number of side pockets FM BS.T14PB Mini Probag Fabric 42X24X34 CM 5 DRAWERS TROLLEY 6 DRAWERS TROLLEY JET.5M3 & JET.5GM3 JET.6M3 & JET.6GM3 JET.5M3 JET.5GM3 JET.6M3 Multifunctional Worktop : Stronger, new integral bi-material handle. Storage compartments for small components. Retaining lip. Can receive a vice. Storage for 6 screwdrivers. Can also accommodate optional vertical accessories and a wooden worktop. Selective Drawer-Opening system smoother opening and easier to use, simply lift the handle. Fully opening drawers. Overall Dimensions: L780x P520xH970mm Five-drawer foller cabinet : 2 drawers 60mm high, 2 drawers 130mm high, 1 drawer 270 mm high Color: red and black FM JET.5M3 JET Roller Cabinet 5 Drawers Red JET.5GM3 JET Roller Cabinet 5 Drawers Black 6-drawer roller cabinet 4 drawers 60 mm high + 1 drawer 130 mm high + 1 drawer 270 mm high D74,000 kg Drawer arrangement : 4x60 + 1x x270 mm Overall dimensions (including wheels and worktop): L.780xD.520xH.970 mm. Effective drawer dimensions: L.569xD.421xH.60/130/200/270 mm Drawer capacity ; 20/25/30 kg Color: red and black 4 ø 125 mm wheels : 2 fixed, 2 castors, one with brake JET.6GM3 FM JET.6M3 JET Roller Cabinet 6 Drawer Red FM JET.6GM3 JET Roller Cabinet 6 Drawer Black 12

13 TROLLEY 6 DRAWERS TROLLEY CHRONO.6M3 ROLL.6M3 & ROLL.6GM3 6 drawers = 15 modules distributed in the 60 and 130 mm drawers: - 3 drawer 60 mm high = 9 modules. - 2 drawers 130 mm high = 6 modules. - 1 drawer 200 mm high. Supplied with 6 partitions for 60 mm drawers and 2 partitions for 130 mm drawers. The 200 and 270 mm drawers can also be fitted with modules. Overall dimensions (including wheels and worktop): 787 x D.518 x H.971 mm. Drawer useful size: L.569 x D.421 x H.60 / 130 / 200 mm. Load per drawer: 20/25/30kg. ROLL.6M3 ROLL.6GM3 Spacious mobile storage cabinets provide onestop solution for a wide range of workshop tools, accessories and supplies. New robust polypropylene worktop holds up to 700kg in weight. Available in a smart red or two-tone grey finish; customisable if required. Large worktop made of polypropylen with fiber (static load resistance 700kg ), integrated edges to prevent tools from falling while moving. Resistant to impacts and hydrocarbons. 2 Han dles for easier maneouverability, one for mov ing and one to lift the roller cabinet and ride over obstacles. Provided slots for 3 screwdrivers. Overall dimensions (including wheels and worktop): 748 x 515 x 970 mm. Drawer useful size: L.569 x D.421 x H.60 / 130 / 200 mm. Weight : kg FM CHRONO.6M3 CHRONO Roller Cabinet 6 Drawer ROLL.6M3 Roller Cabinet 6 Drawers Red ROLL.6GM3 Roller Cabinet 6 Drawers Grey 7 DRAWERS HEAVY-DUTY TROLLEY 7 DRAWERS TROLLEY JET.T7M3 & JET.T7GM3 JET.T7M3 JET.T7GM3 7 drawers (useful dimensions): 18 modules dis tributed in the 60 and 130 mm high drawers: - 5 drawers 60 mm high = 15 modules. - 1 drawers 130 mm high = 3 modules. - 1 drawer 200 mm high. Supplied with 6 partitions for 60 mm drawers and 2 partitions for 130 mm drawers. The 200 and 270 mm drawers can also be fitted with modules. Total load in the drawers: 155 kg. High storage capacity: 155 litres. 1 full-length closed compartment for storing long tools: - Door with key lock. - Identical key for the drawers and the compart ment. Supplied with the plastic slider. For the wood top version, just add wood top JET. A14M5. Compatible with the JET+ and JET.XL range of accessories. 4 very high performance wheels 160 mm diameter - 2 castors (including 2 with brakes) and 2 fixed. Drawer useful size: L.569 x D.421 x H.60/130/200 mm. Compartment dimensions: L.378 x D.430 x H. 679 mm (passage width with door open 310 mm). JET.7M3, JET.7GM3 & CHRONO.7M3 JET.7M3 JET.7GM3 CHRONO.7M3 7 drawers = 18 modules distributed in the 60 and 130 mm drawers: - 5 drawers 60 mm wall = 15 modules. - 1 drawer 130 mm wall = 3 modules. - 1 drawer 200 mm wall. The 200 and 270 mm drawers can also be fitted with modules. Supplied with 6 partitions for 60 mm drawers and 2 partitions for 130 mm drawers. Total load in the drawers: 155 kg. Wall storage capacity: 155 litres. Drawer useful size: L.569 x D.421 x H.60 / 130 / 200 mm. Furnished with 4 separators for drawers of 60 mm and 2 separators for drawer of 130 mm JET.T7M3 JET Roller Cabinet Mobile Workbench 7 Drawer Red JET.T7GM3 JET Roller Cabinet Mobile Workbench 7 Drawer Black FM JET.7M3 JET Roller Cabinet 7 Drawer Red FM JET.7GM3 JET Roller Cabinet 7 Drawer Black CHRONO.7M3 CHRONO Roller Cabinet 7 Drawer FACOM MODULAR SYSTEM MOD.44-1 (Module of 9 open-end wrenches) MOD.44-2 (Module of 3 Large open-end wrenches) 9 open-end wrenches: 44.6x7-8x9-10x11-12x13-14x15-16x17-18x19-21x23-22x24mm; Tray PL Large open-end wrenches: 44.26x28-27x29-30x32mm; Tray PL.316 FM MOD.44-1 Module of 9 Large Open-and Wrenches 6 To 24 mm FM MOD.44-2 Module of 3 Large Open-end Wrenches 26 To 32 mm 13

14 TOOL SET MODULAR SYSTEM FACOM MODULAR SYSTEM MOD Module of 4 large OGV combination wrenches 4 large OGV combination wrenches: mm; Tray PL.314 FM MOD Module of 4 Combination Wrenches 27 To 32 mm MOD.S Module of SQ 1/2 S.D. sockets, accessories 1 x high performance sealed 1/2 ratchet S.161B. 19 x 1/2 metric 6-point sockets S.H mm. 2 x 1/2 extensions: L 130 mm (S.210) - L 250 mm (S.215). 1 x 1/2 universal joint: S.240A. Thermoformed tray M (309 x 188 mm): PL.M MOD.S Module of Socket Set Sq 1/2 MOD.R Module of SQ 1/4 S.D sockets, accessories and hex-keys 1 x high performance sealed 1/4 ratchet R.161B. 10 x 1/4 metric 6-point sockets R. 5, mm. R.209, R.215, R.240A, R.120A, R.236A. 1 x 1/4 socket bit holder with retaining pin - standard for 1/4 bits - S.236. R x bits - 1/4 drive bit mm - L 25 mm: - ED.1T for Pozidriv head screws: PZ1 - PZ2. - ES.1T for slotted head screws: mm. - EH.1 for metric 6-point socket head screws: mm. 9 x metric 6-point short-reach keys: 82H. 2-2, mm. Thermoformed tray M (420 x 188 mm): PL.L13. MOD.PC Module of 4 Snap Ring Pliers For Circlips 18 to 60 mm: - 177A.18 straight nose - 197A nose - for exterior Circlips A.18 straight nose - 199A nose - for interior Circlips. FM MOD.PC Module of 4 Circlip Pliers MOD.440-1PB MOD Module of 16 OGV combination wrenches: 16 OGV combination wrenches: mm; Tray PL.348 FM MOD.440-1PB Module of 16 Combination Wrenches 6 To 24 mm MOD.MI3 Module of Hammer Tools Hammer Tools 205A.50 Hammer 208A.32CBA Mallet with tips Drift Punches Centre Punch Chisel Tray PL.333 FM MOD.MI3 Module of Impact Tools MOD.R Modular Socket Sq1/4 INCH 6PT W/ Hex Key MOD.PR11 Module of Adjustable Pliers 181A.25CPE: lockable multigrip pliers. 501AMP : trigger-release lock-grip pliers. Heat-formed tray PL.330. FM MOD.PR11 Module of 2 Adjustable Plier MOD.CPE Module of 3 of Mechanical Pliers 3 Mechanical Pliers CPE Straight-Nose Plier CPE Combination Plier CPE High Performance Cutter Wire Plier Tray PL.627 FM MOD.CPE Module of 3 Mechanical Pliers MOD.A1PB Module of 8 Protwist Screwdrivers AN3X75 (-) AN3,5X100 (-) AN4X100 (-) AN5,5X125 (-) AWH6,5X150 (-) AWH8X175(-) ANP1X100 (+) ANP2X125 (+) FM MOD.A1PB Module of 8 Protwist Screwdrivers MOD.A2 Module of 8 Protwist Screwdrivers AN 2x75-2,5x75. (-) ANP 0x75. (+) AWPH 3x150. (+) AWDH 3x150. (*) AND 0x75-1x100-2x125.(*) Heat-formed tray PL.631. (*) FM MOD.A2 Module of 8 Protwist Screwdrivers 14

15 TOOL SET WITH TROLLEY TOOL SET WITH TROLLEY CHRONO6XL.M106 MOD.R MOD.A1PB MOD.S MOD.440-1PB MOD.MI3 MOD.44-1 MOD.PR11 MOD.CPE MOD.PC CHRONO6XL.M106 Module Mechanical Tool Set With Trolley Mechanical tool set 106 pcs. Consist of : FM TROLLEY 6 DRAWERS CHRONO.6M MODULAR SOCKET SQ1/4 INCH 6PT W/ HEX KEY MOD.R FM MODULAR SCREWDRIVER SET (8) MOD.A1PB SOCKET MODULE SQ1/2 IN 6PT MOD.S FM COMBINATION WRENCH SET (16) MOD.440-1PB FM MODULE OF HAMMER TOOLS MOD.MI3 FM MOD OPEN-END WRENCHES MOD.44-1 FM MODULAR ADJUSTABLE PLIER (2PCS) MOD.PR11 FM MODULAR PLIER SET MOD.CPE FM MODULAR CIRCLIP SETS MOD.PC CHRONO6XL.M121 MOD.R MOD.A1PB MOD.S MOD.440-1PB MOD.MI3 MOD.44-1 MOD.PR11 MOD.CPE MOD.PC MOD.A2 MOD.44-2 MOD CHRONO6XL.M121 Module Mechanical Tool Set With Trolley Mechanical tool set 121 pcs. Consist of : FM TROLLEY 6 DRAWERS CHRONO.6M MODULAR SOCKET SQ1/4 INCH 6PT W/ HEX KEY MOD.R FM MODULAR SCREWDRIVER SET (8) MOD.A1PB SOCKET MODULE SQ1/2 IN 6PT MOD.S FM COMBINATION WRENCH SET (16) MOD.440-1PB FM MODULE OF HAMMER TOOLS MOD.MI3 FM MOD OPEN-END WRENCHES MOD.44-1 FM MODULAR ADJUSTABLE PLIER (2PCS) MOD.PR11 FM MODULAR PLIER SET MOD.CPE FM MODULAR CIRCLIP SETS MOD.PC FM MODULAR SCREWDRIVER SET MOD.A2 FM MOD OPEN-END WRENCHES MOD.44-2 FM COMBINATION WRENCH SET MOD

16 TOOL SET WITH BOX OR CASE ELECTRICAL TOOL SET CM.E15 FM CM.E15 Electrical Tool Set FM E15 Electrical Tool Set w/ Tool Box CM.E15 consist of: Description Roll set of open-end wrenches 3.2 to 13 mm Adjustable wrench 1000V insulated screwdrivers3.5x75-4x x150 and 6.5x150 mm 1000V insulated screwdrivers for PhillipsJ heads no. 1 and V insulated screwdrivers for PozidrivJ heads no. 1 and 2 Stubby screwdriver for slotted heads 4 mm Stubby screwdriver for PhillipsJ heads no. 1 Screw starter Offset screwdrivers 6 and 8 mm 9 Sleeve set of spherical head hex keys 1.5 to 10 mm Sheathed flat-nose pliers Sheathed angled half-round nose pliers Sheathed diagonal cutters Sheathed end cutters CM.E15 consist of: Description Sheathed multigrip pliers Sheathed end-entry wire stripper Insulated terminal crimping pliers Electronic soldering iron Electricians scissors Electricians knife with wire stripper Hacksaw frame Bimetal saw blades Square punch Riveting hammer 32 mm Electricians hammer Drift punches mm Centre punch Chisel Side-cutting chisel Tape measure 3m CM.E CM.E18 Electrical Tool Set FM E18 Electrical Tool Set with Tool Box CM.E18 consist of: Description Set of combination wrenches 8 to 19 mm Roll set of miniature open-end wrenches 3.2 to 13 mm Adjustable wrench Radio socket set 5.5 to 14 mm, with screwdriver bits and accessories 1000V insulated screwdrivers 3.5x75, - 4x x150 and 6.5x150 mm 1000V insulated screwdrivers for PhillipsJ heads no. 1 and V insulated screwdrivers for PozidrivJ heads no. 1 and 2 Screw starter for slotted heads Screw starter for cross-heads Offset screwdrivers 6 and 8 mm Sleeve set of spherical head hex keys 1.5 to 10 mm Sheathed flat-nose pliers Sheathed combination pliers Sheathed angled half-round nose pliers Sheathed angled half-round nose pliers Sheathed diagonal cutters Sheathed end cutters Sheathed multigrip pliers Lock-grip pliers Sheathed end-entry wire stripper Jivaro LC 28 mm sheath stripper Insulated terminal crimping pliers Electronic soldering iron Mechanical retriever Multifunction tester Cable cutter Electricians scissors Electricians knife with wire stripper Hacksaw frame Bimetal saw blades Square punch Riveting hammer 32 mm Electricians hammer Drift punches mm Side-cutting chisel Centre punch Chisel Vernier calliper Level 400 mm Tape measure 3m Stainless rule 200 mm CM.E18 consist of: Description 16

17 TOOL SET WITH BOX OR CASE METRIC MECHANICAL TOOL SET CM.100A FM CM.100A Metric Mechanical Tool Set M100A Metric mechanical tool set w/box CM.100A Description Combination wrenches 7 to 24 mm Socket set 10 to 32 mm and accessories (in a case) Screwdrivers for slotted heads 3x75-4x x100 mm Screwdrivers for slotted heads 6.5x150-8x200 mm Screwdrivers for PhillipsJ heads no V insulated screwdriver for slotted heads 4 mm CM.100A Description Sheathed combination pliers Sheathed multigrip pliers Tape measure 3m Hacksaw frame Bimetal saw blades Riveting hammer 32 mm Sheathed nail sets 2-4 mm Sheathed drift punches 2-4 mm CM.110A FM CM.110A Metric Mechanical Tool Set FM M110A Metric Mechanical Tool Set Supplied with BT.11A CM.110A consist of: Description Combination wrenches 7 to 24 mm Adjustable wrench 10 1/4 and 1/2 sockets and accessories (in a case) Screwdrivers for slotted heads 3.5x75-4x x100 mm Screwdrivers for slotted heads: 6.5x150-8x200 mm Screwdrivers for Phillips heads no Screwdrivers for Pozidriv heads 1000V insulated screwdriver for slotted heads 4 mm Sleeve set of hexagonal keys 1.5 to 10 mm Sheathed combination pliers Sheathed piano wire diagonal cutters Sheathed multigrip pliers Sheathed straight half-round nose pliers Sheathed flat-nose pliers CM.110A consist of: Description Large-capacity lock-grip pliers Inside-circlip pliers Outside-circlip pliers Tape measure 3m Hacksaw Frame Bimetal saw blades Square punch Riveting hammer 32 mm Plastic-tip mallet Sheathed nail sets 2-4 mm Sheathed drift punches 2-4 mm Precision centre punch 4 mm Electricians knife with wire stripper 17

18 TOOL SET WITH BOX OR CASE CM.120A, CM.140A & CM.160A CM.120A Mechanical Tool Set FM CM.140A Mechanical Tool Set CM.160A Mechanical Tool Set INCH MECHANICAL TOOL SET CU.110A CU.110A CU110A Mechanical Inch Tool Set Mechanical Inch Tool set With Tool Box CU.110A consist of: Description Combination wrenches 1/4 to 15/16 Adjustable wrench 10 Square 1/2 socket set 3/8 to 1 1/4 and accessories (in a case) Screwdrivers for slotted heads 3.5x75-4x x100 mm Screwdrivers for slotted heads: 6.5x150-8x200 mm Screwdrivers for Phillips heads no Screwdrivers for Pozidriv heads 1000V insulated screwdriver for slotted heads 4 mm Wallet set of hexagonal keys 1/16 to 3/8 Sheathed combination pliers Sheathed piano wire diagonal cutters Sheathed multigrip pliers CU.110A consist of: Description Sheathed straight half-round nose pliers Sheathed flat-nose pliers Large-capacity lock-grip pliers Inside-circlip pliers Outside-circlip pliers Tape measure 3m Hacksaw Frame Bimetal saw blades Square punch Engineers hammer Plastic-tip mallet Sheathed nail sets 2-4 mm Sheathed drift punches 2-4 mm Precision centre punch 4 mm Electricians knife with wire stripper ELECTRONIC TOOL SET 2138.EL29 & 2138.EL EL EL EL29 Electronic Tool Set With Case EL35 Electronic Metric and Inch Tool Set With Case 18

19 TOOL SET WITH BOX OR CASE INSULATED 1000V TOOLS Insulated 1000v Tools Facom VE-series 1000V Screwdrivers Tools built for electrical safety to EN ( )specifications, and designed for working on live components up to 1,000V AC and 1,500V DC. Make sure insulation is not damaged by: - Heat (-20 C to 70 C working temperature) - Chemicals - Cuts or perforations Visually check insulation before use. Wear gloves and eye protection. For your safety, each screwdriver is tested individually at 10,000 volt for 10 second, at the end of the manufacturing cycle. FM AP0X75VE Insulated Screwdriver PH0 (+) FM AP1X100VE Insulated Screwdriver PH1 (+) FM AP2X125VE Insulated Screwdriver PH2 (+) FM AP3X150VE Insulated Screwdriver PH3 (+) FM AP4X200VE Insulated Screwdriver PH4 (+) FM A2,5X75VE Insulated Screwdriver (-) 0.4x2.5MM FM A3,5X100VE Insulated Screwdriver (-) 0.6x3.5MM FM A4X100VE Insulated Screwdriver (-) 0.8x4.0MM FM A5,5X125VE Insulated Screwdriver (-) 1.0x5.5MM FM A5,5X150VE Insulated Screwdriver (-) 1.0x5.5MM FM A6,5X150VE Insulated Screwdriver (-) 1.2x6.5MM APVE.J6PB AP.J5VE MOD.A1VE Specification : Insulated Slotted Parallel 2.5x75mm + 3.5x75mm + 4x100mm + 5.5x125mm Insulated Phillips PH1x100mm + PH2x125mm Specification : Insulated Slotted Parallel 2.5x75mm + 3.5x75mm + 4x100mm + 5.5x125mm Insulated Phillips PH1x100mm + PH2x125mm Specification : AVE mm. AP1x100VE - AP2x125VE. AD1x100VE - AD2x125VE. Heat-formed tray PL.325 FM APVE.J6PB Insulated Screwdriver Set 6 pcs FM AP..J5VE Insulated Screwdriver Set 5 pcs FM MOD.A1VE Module of 8 Insulated Screwdriver VE.3PB MOD.VE Specification : 180.VE: multigrip pliers VE: diagonal cutting pliers VE: wire stripper. Specification : VE.3PB Pack of 3 pliers 1000 Volts insulated VE Half-round nose pliers VE Combination pliers VE Diagonal cutters FM VE.3PB Pack Of 3 Pliers 1000 Volts Insulated MOD.VE Module Insulated Plier 3pcs 1000V 19

20 Download our app! KLS/P&A.452/6.5K/FCM.1/SHA.PER/