Thank You, Tom Wright Owner/President Williams Gun Sight Company

Transcription

1

2 2 3 As we enter 2018, Williams Gun Sight Company will be celebrating our 92nd year in the firearm industry. Such an accomplishment would not have been possible without the hardwork and dedication of hundreds of employees and thousands of loyal customers over the years. NEW & FEATURED PRODUCTS SELF DEFENSE PISTOL FIRESIGHTS TARGET PISTOL FIRESIGHTS ACE IN THE HOLE/ SHOTGUN & RIFLE FIRESIGHTS FIRESIGHT PEEP SETS/ FIRESIGHT FRONT SIGHTS RUGER AMERICAN TARGET FP For Ruger American 22lr rimfire with standard or compact barrel. WMS #71078 TARGET REAR...$86.95 WMS #71079 TARGET GLOBE FRONT...$69.95 GLOCK 42 & 43 FIRESIGHTS Anti-snag design, fiber optics, fast acquisition WMS # Even though we are growing older, Williams is not slowing down. We will be expanding our R&D efforts and introducing new products to the market place throughout 2018, as well as adding 10,000 sq. ft. to our manufacturing facility. The future looks bright for Williams Gun Sight Company. I would like to personally thank our current and future family of employees and customers. MUZZLELOADER FIRESIGHTS/ MILITARY SIGHTS FP SERIES PEEP SIGHTS TARGET FP SERIES 5D SERIES RECEIVER SIGHTS/ WGRS SERIES RECEIVER SIGHTS OPEN SIGHTS STREAMLINED RAMPS/ GUNSMITHING TOOLS RUGER LCR FIRESIGHT Anti-snag design, fiber optic, fast acquisition. Fits only.38,.357, and 9mm models. WMS # $34.95 RUGER SR1911 FIRESIGHTS Anti-snag design, fiber optic, fast acquisition. WMS # Thank You, QUICK CONVERTIBLE SIDE MOUNTS/ SIDE MOUNT RINGS Tom Wright Owner/President Williams Gun Sight Company BEADS,TAPS, DRILLS, & KITS/ WEBSITE INFORMATION UNIVERSAL GHOST RING FIRESIGHTS Brilliant in low light, Faster acquisition compared to standard sights, No gunsmithing required. WMS # TAURUS MILLENNIUM G2 SERIES Anti-snag design, fiber optic, fast acquisition WMS #

3 4 5 COLT Colt Government Model Series 80 (Staked Front) FNH FNH: FNX-40, FNP-40, FNS FNH: FNX-45, FNP-45, (Not Tactical) FNH: FNX-9, FNP-9, FNS-40 GLOCK Glock 17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 37, 38, Glock 20, 21, 29, 30, 31, 32, 36, Glock 42, 43 KAHR Kahr (Excludes CW & CM Series) KIMBER Kimber 1911 (Fixed sight guns, excludes SIS) RUGER Ruger LCR (Only for.38,.357, 9mm models) Ruger SR1911 Ruger P-Series (Excludes P85, P97DC Gunsmithing Required) Ruger LC9 & LC380 SMITH & WESSON S&W S&W S&W S&W S&W SD 9 & 40 VE M&P Shield 9mm, 40, & 45 M&P.22lr Full Size M&P s (Fits all M&P s except M&P 22 s) Bodyguard.380ACP (Gunsmithing Required) SPRINGFIELD ARMORY Springfield XD, XDM (Excludes Tactical Models) Springfield XDS (Rear Only) TAURUS IMPROVED VISIBILITY ANTI-SNAG DESIGN CNC MACHINED HIGH GRADE ALUMINUM Taurus 1911 s (Compatible w/ PT809, PT809C, PT840, PT845) Taurus Millennium G2 Series Taurus PT111, PT140, PT145, PT132, PT138 (Screw-on style sights) Taurus Pro w/ Dovetail PT111, PT140, PT145, PT745, 24-7 s (Excludes G2) $34.95 $26.95 HIGH-VISIBILITY FIBER OPTICS 4 5

4 6 7 CLICK ADJUSTMENT DESIGN HIGH-VISIBILITY FIBER OPTICS IMPROVED LOW LIGHT VISIBILITY CNC MACHINED HIGH GRADE ALUMINUM BROWNING BUCKMARK COLT GLOCK Glock (All models except 42 & 43) RUGER Browning Buckmark (Rear sight length over one inch. Excludes Target, 5.5 Field & target, Challenge & Commemorative models, hunter & Contour 5.5) Browning Buckmark (Rear sight length less than one inch. Excludes Target, 5.5 Field & target, Challenge & Commemorative models, hunter & Contour 5.5) Ruger MK II & MK III w/ adj. rear sight (Pre 2015, Excludes 22/45 Lite models) Ruger MK II & MK III 22/45 Lite w/ adj. rear sight (Pre 2015) Ruger MK III & MK IV (Post 2015, Excludes 22/45 Lite models) Ruger MK III & MK IV 22/45 Lite (Post 2015, red models use #71013) Ruger MKII & MK III 6 7/8 Taper Barrel Ruger GP100 and other Ruger revolvers with spring pin front sights. Ruger new model Single Six 22lr Ruger SR22 (Elevation Only) Ruger SR9, SR40, SR9C, SR40C, and SR45 (Excludes 9E) Ruger P-Series (Excludes P85, P97DC) $59.95 SMITH & WESSON S&W M&P.22 Compact (Elevation Only) S&W M&P s (Excludes Shield, Competition, and.22lr s) S&W M&P.22lr Full Size S&W SD9 and SD40 VE Colt Series 80 DESERT EAGLE Desert Eagle, fits USA made with DE or DC Serial number prefix $59.95 SPRINGFIELD ARMORY Springfield XD, XDM (Excludes tactical models) OTHER TAURUS Pro w/ Dovetail PT111, PT140, PT145, PT809, PT745, 24-7 s (Excludes G2) SIG SAUER P220, P225, P226, P228 (Excludes X5 Series) FN FNH, FNX, FNS 6 7

5 8 9 CNC MACHINED HIGH GRADE ALUMINUM ACE IN THE HOLE - TACTICAL (DOES NOT INCLUDE FRONT SIGHT) Designed for self defense shotguns and provides the Ace in the Hole backup aperture sight if something goes wrong with your primary sighting option. *Does not come with front sight. - Picatinny scope rail. - Firesight ghost ring for fast acquisition. - Windage and elevation adjustment. - Can be used with or without front ramp Remington 870 (May require drilling & tapping) Mossberg 500 (May require drilling & tapping) ACE IN THE HOLE SCOPE BASE SET PICATINNY SCOPE RAIL W/ INTEGRAL BACKUP SIGHT INTERCHANGEABLE APERTURES AND GHOST RINGS ADJUSTABLE FOR WINDAGE AND ELEVATION Ruger 10/22 Marlin 336 w/ Front Ramped Sights Mossberg 500 w/ Front Ramped Sight (May require drilling & tapping) $64.95 $64.95 $ Traditions Vortex, Pursuit & Buckstalker (Front Not Included) $ CVA Accura, Optima, Wolf & Apex $59.95 (Front Not Included) Remington 870 (May require drilling & tapping) $ T/C Encore, Prohunter, Omega, Endeavor, $59.95 Impact, & Triumph (Front not included) UNIVERSAL GHOST RING AND UNIVERSAL SLUGGER FIRESIGHTS Our universal Firesight Ghost Ring is perfect for turkey, deer, and personal protection. A shooter s focus automatically goes towards center and with our fiber optic ghost ring it makes for faster acquisition on target. Both our Ghost Ring and Slugger models provide amazing low light visibility, adjustable windage and elevation, attach to vent rib and NO gunsmithing is required. Excludes Remington Versa Max Universal Firesight Ghost Ring Set Universal Firesight Open Slugger SHOTGUN & RIFLE FIRESIGHTS Browning BLR Mossberg 500 Ithaca 37 Deerslayer Remington - Pre 2003 Rifiles, Muzzleloaders, and all Shotguns Remington - Post 2003 Rifles, and Muzzleloaders w/ 1pc ramp Remington Ghost Ring - Pre 2003 Rifles, Muzzleloaders, and all Shotguns Remington Ghost Ring - Post 2003 Rifles, Muzzleloaders, w/ 1pc. ramp Winchester 1300 Firesight Set *ABOVE REMINGTON SIGHTS REQUIRE EXISTING SIGHT BASES $37.95 $33.95 $37.95 $29.95 $29.95 $31.95 $31.95 $35.95 UNIVERSAL GHOST RING UNIVERSAL SLUGGER FIRESIGHT REMINGTON MOSSBERG REMINGTON W/ GHOST RING 8 9

6 10 11 FIRESIGHT RIFLE BEADS Steel front dovetail sight beads machined to accept Firesight light gathering rod. A must for all shooters in low light situations. Comes in a variety of heights. (N) NARROW WIDTH IS FOR WILLIAMS STREAMLINED AND SHORTY RAMPS. (M).340 MEDIUM WIDTH IS FOR FACTORY RAMPS SUCH AS MARLIN, REMINGTON, ETC. (W).531 WIDE WIDTH IS FOR DOVETAILED BARRELS COMMONLY FOUND ON.22 RIFLES AND MUZZLELOADERS. MARLIN Marlin 336 WGRS Marlin 336 FP (w/ ramped front sight) $ RUGER Marlin 336 5D (w/ ramped front sight) Ruger 10/22 WGRS Ruger American.22LR WGRS Ruger American.22 Mag WGRS WINCHESTER Winchester 94 FP (w/ ramped front sight) Winchester 94SE FP Winchester 94 5D (For Winchester 94 Top Eject) Winchester 94SE Ranger 5D (For Winchester 94 Side Eject w/ dovetail cut in barrel for front sight) Win. 94/Marlin 336 Firesight Set Win. 94/Marlin 336 Rear Sight Only Browning BLR Marlin 25N & 25MN Marlin 925, 925M, 60 Blue, 915Y Blue, 983T, 981T, 795 Blue Ruger 10/22 Ruger American.22LR/.22 Mag (Rear Only) $52.95 $83.95 $83.95 $53.95 $53.95 Fully adjustable rear metallic Firesights that fit a wide variety of lever action rifles, and semi-auto and bolt action rifles with front ramp. $37.95 $19.95 $37.95 $29.95 $29.95 $25.95 $ D FP WGRS ITEM PRICE $10.50 FIBER OPTIC HOOD For Williams Streamlined Ramps. Hood Only. 1-PC FIRESIGHT RAMPS These metallic ramps can be used to replace many of the plastic ramps on the market. Attaches with one 6-48 screw. BARREL ITEM HEIGHT DIAMETER PRICE WGOS SLIDE/BLADE REPLACEMENT ITEM HEIGHT W.410W W.500W.538W.570W PRICE WGOS Slide/Blade Firesight Combination - Fits all standard Williams adjustable rear guide open sight bases. Both pieces are made of aircraft strength aluminum (NOT PLASTIC). Turn a classic rear sight into Firesights. ITEM HEIGHT PRICE $ /4 $ $24.95 ITEM HEIGHT 250N 290N 312N 343N 375N 406N 450N PRICE ITEM HEIGHT 250M 290M 312M 343M 375M 406M 450M 500M 538M 570M FIRESIGHT ASSORTMENT KIT SAVINGS & SELECTION For the gunsmith or shooting enthusiast. This kit contains our most popular Firesight beads, rear dovetail Firesight, and fibers only for repairs and custom work. Take advantage of the kit price savings. KIT INCLUDES: 2 Firesight Rifle Beads (1 Narrow, 1 Medium) 2 Firesight Rifle Beads (1 Narrow, 1 Medium) 2 Firesight Rifle Beads (1 Narrow, 1 Medium) 2 Firesight Rifle Beads (1 Narrow, 1 Medium) 2 Firesight Rifle Beads (1 Narrow, 1 Medium) 2 Firesight Rifle Beads (1 Narrow, 1 Medium) 2 Firesight Rifle Beads (1 Narrow, 1 Medium) 1 Firesight Rifle Bead 1 Firesight Rifle Bead 2 Rear Dovetail Firesights 2-6 Fiber Only.040 Diameter (1 Red, 1 Green) 2-6 Fiber Only.060 Diameter (1 Red, 1 Green) WMS #70806 PRICE $ Wide.570 Wide NOTE: INSTALLATION OF DOVETAILED FRONT SIGHTS IN RAMPS AND ESPECIALLY DOVETAILED BARRELS ALMOST ALWAYS REQUIRES SOME MINOR FITTING. GUNSMITH INSTALLATION IS RECOMMENDED

7 12 13 SKS FIRESIGHT SET Combines the Firesight front bead with Williams fully adjustable metallic rear sight for an incredible sight picture. No gunsmithing required SKS Rifle Firesight Set SKS Rifle Firesight (Front Only) $20.95 SKS Rifle Firesight Set MAUSER 98 FRONT FIRESIGHT Mauser 98 Front Firesight for.200 Dovetail Mauser 98 Front Firesight Mauser 98 Front Firesight CVA KNIGHT/ TRADITIONS CVA s w/ Octagon Barrels CVA s w/ Round Barrels and Dovetail Front Sight CVA Accura, Optima, Kodiak, and Wolf Fits all Knight Rifles (Includes Ramp) Traditions, Vortek, Cabela s Private w/ Round Barrels REMINGTON Front and rear Firesights replace existing Remington factory rear blade and front bead. (Replaces Rear Blade) Fits pre 2003 Rifles, Muzzleloaders, $29.95 All Shotguns Fits post 2003 Rifles, Muzzleloaders $29.95 w/ 1pc Ramp THOMPSON CENTER OTHER Thompson Center w/ Octagon Barrels Thompson Center New Englander Cabela s Octagon Hawken Savage MLII, Winchester X150 NOTE: INSTALLATION OF DOVETAILED FRONT SIGHTS IN RAMPS AND ESPECIALLY DOVETAILED BARRELS ALMOST ALWAYS REQUIRES SOME MINOR FITTING. GUNSMITH INSTALLATION IS RECOMMENDED. SKS APERTURE SIGHT The WSKS Aperture Sight comes with a special large hole aperture (R 3/8 x.150) for an excellent field of view. Also available as Firesight set SKS Aperture Sight $25.95 AK47 APERTURE SIGHT Similar to the Williams WSKS sights, the WAK47 Aperture Sight is designed for AK47 s with the original military type rear sight. Fully adjustable for elevation and windage. No drilling and tapping required AK47 Aperture Sight $25.95 M-96 APERTURE SIGHT Designed for economy and easy installation, the WM-96 fits Mauser 96 type military rifles. It installs in place of the military rear sight without drilling and tapping and is compatible with the military front sight. Fully adjustable for windage and elevation. Available in WM-96 Aperture Sight with R 3/8 x.150 Aperture. SKS Aperture Sight AK47 Aperture Sight M96 Aperture Sight $25.95 M96 Aperture Sight 12 13

8 14 15 MARLIN FP-39 FP-39TM FP-336 WINCHESTER FP-71 FP-94/36 FP-94/375 FP-94SE CZ FP-CZ FP-Hawken FP-T/C FP-T/C Encore/ Omega FP-Triumph For Marlin 39A lever action. WMS #1254 For Marlin 39A lever action. (Mounts in front scope mount hole) WMS #70807 For Marlin centerfire lever actions (uses two rear scope mount holes) Requires hammer extension. Also fits Henry Big Boy steel models. WMS #70222 For Winchester 71, 86, 05, 07, and 10. Also for Model 95 Winchester lever action and Browning centerfire lever action. WMS #1266 For Winchester Models 94 Top eject, 55, 63, 64, 65, and 9422; Marlin Models 36, 336, 444, 44 Magnum, and 93 and 1895 and 1895G pre 2001; Sears centerfire lever action. WMS #1274 For Winchester 94 Big Bore,. Also fits 94 Big Bore Angle Eject, but drilling and tapping is necessary. WMS #1278 For newer Winchester 94 Angle Eject models (Fits factory drilling and tapping on top of receiver. WMS #20550 For CZ-452 rifles (excluding scout - see below). Also fits CZ455 Luz (needs 3/8 shorty ramp and N Bead. Must be drilled and tapped. Only fits dovetail receiver (Not 11mm). WMS #70883 THOMPSON CENTER For the Pre 1991 Thompson/Center Hawken and Renegade M/L rifles. This sight fitted with sub-block. This sight fitted with sub block. Necessary to drill and tap one hole on models that factory discontinued drilling. WMS #1340 For Thomson/Center Contender Pistol and Carbine. WMS #1376 For Thompson/Center Encore, Omega, G2, Prohunter, Endeavor (Fits factory drilling and tapping on top of receiver). Scout requires higher, 570W front sight. WMS #36890 Fits T/C Triumph, Impact WMS #70938 H&R Fits Buffalo Classic, Handi rifles. WMS #70273 FP-H&R KNIGHT FP-Legend SAVAGE FP-99S FP-340 OTHER FP-98 FP-AG FP-GR For Modern Muzzloading Knight Legend, Wolverine, Disc, Rolling Block, Bighorn, American, and T-Bolt (Fits factory drilling and tapping, Excludes Vision). WMS #54250 For late Savage 99 with top tang safety. Will fit old 99, but will be necessary to drill and tap. WMS #1290 For Stevens Savage. WMS #1302 For military Mauser, Husqvarna, Weatherby Mark V, right and left, and BRNO without dovetailed receiver. WMS #1282 For air guns and.22 rifles with dovetail grooved receiver and high line of sights. (No drilling and tapping required, only fits flat-top receivers). at lowest adjustment. WMS #14168 For air guns and.22 rifles with dovetail grooved receiver and low line of sights. (No drilling and tapping required, only fits flat top receivers)..350 at lowest adjustment. WMS #9683 NOTE: ADD TK TO MODEL NUMBER IF TARGET KNOBS ARE DESIRED. SEE PRICE LIST FOR COMPLETE LISTING OF ALL AVAILABLE MODEL VARIATIONS. FOOLPROOF DESIGN FOR ALL HUNTING AND TARGET SCENARIOS MICRO ADJUSTMENTS FOR WINDAGE/ELEVATION CNC MACHINED POSITIVE INTERNAL LOCKS Internal micrometer adjustments have positive internal locks. The FP is strong, rugged, and dependable. The alloy used to manufacture this sight has a tensile strength of 40,000 psi. Yet, the FP is light and compact, weighing only 1.5 ounces. *Some FP sights may require stock modification. FP RECEIVER SIGHT OPTIONS - OPTIONAL APERTURES - STANDARD TARGET KNOBS (TK) FP STANDARD $74.95 FP w/ TARGET KNOBS $

9 16 17 AVAILABLE APERTURES TARGET - RUGER AMERICAN.22LR These target sights are specifically designed to fit Ruger American.22LR rifles with both standard and compact barrel lengths. Both the front and rear sights come complete, ready to install, with no gunsmithing required. TWILIGHT TARGET REGULAR Ruger American.22LR Target FP Rear Sight Ruger American.22LR Target Globe Front Sight (Includes Attaching Base) $86.95 $69.95 TWILIGHT SERIES Twilight apertures are designed for shooting under poor light conditions, early morning, late evening, and other inclement conditions. They create a sharp contrast that gives quick definition to the aperture hole, and they eliminate the fuzz with which many shooters have trouble. Williams Twilight apertures will accommodate Redfield, Lyman, etc. TW-3/8 x.050*... O.D. w/.050 inner hole TW-3/8 x.093*... O.D. w/.093 inner hole TW-3/8 x.125*... O.D. w/.125 inner hole TW-3/8 x.150*... O.D. w/.150 inner hole TW-1/2 x /2 O.D. w/.050 inner hole TW-1/2 x /2 O.D. w/.093 inner hole TW-1/2 x /2 O.D. w/.125 inner hole *Available with long shank for WGRS Receiver Sights REGULAR SERIES Buckbuster - Standard - Target We have always felt that a disc with a small outer diameter and a large inner hole is best for hunting. For this reason, we have made the O.D. disc with a.093 inner hole as standard equipment. Other sizes are optional. Available in High or Low sight line models, the TARGET-FP receiver sight with proper attaching base can be adapted to most.22 caliber target rifles as well as many sporter type rifles. See the attaching base selection chart for models currently offered. TARGET-FP HIGH In most cases the TARGET-FP (high) receiver sight is recommended on target type rifles with globe front sights. Elevation adjustment range up to.5 WMS #1222 $79.95 TARGET-FP HIGH LEFT HAND Same as Target-FP High, but mounts of the right side of gun for left hand shooters. WMS #71121 $79.95 TARGET-FP LOW The TARGET-FP (low) is for sporter type rifles and is compatible with standard front sights (some guns may require higher front beads) or the lowest globe type front sights. WMS #1223 $79.95 R-3/8 x.050*... O.D. w/.050 inner hole R-3/8 x.093*... O.D. w/.093 inner hole (Standard) R-3/8 x.125*... O.D. w/.125 inner hole (Buckbuster) R-3/8 x.150*... O.D. w/.150 inner hole R-1/2 x /2 O.D. w/.050 inner hole R-1/2 x /2 O.D. w/.093 inner hole R-1/2 x /2 O.D. w/.125 inner hole R-1 x O.D. w/.050 inner hole (Target) *Available with long shank for WGRS Receiver Sights ATTACHING BASE SELECTION CHART FOR TARGET-FP $ #540 Fits Remington Models 540X, 541-S, 580*, 581*, 582* #510 #75 #64 Fits Remington Models 510*, 511*, 512*, 513-T, 521-T Fits Winchester Model 75 Fits Savage/Anschutz Model 64* and Mark 12* *Drilling and tapping required. TARGET GLOBE FRONT SIGHT (LESS ATTACHING BASE) The Williams Target Globe Front Sight is adaptable to many different rifles for target competition shooting. It comes complete with a selection of inserts. It mounts easily to the attaching base (See below) with a knurled locking screw. Height of the target globe sight.545 center, not including the attaching base. ATTACHING BASES FOR TARGET GLOBE FRONT SIGHT $ Dovetail (Low) Dovetail (High) Screw On Screw On Screw On Height.300 Height Height.215 WMS #47478 $50.95 Height.220 Height.456 Radius.300 Radius.350 Radius

10 Positive Windage and Elevation locks - Lightweight, Strong, Accurate - Williams Quality Throughout - Rustproof Available for most of the more popular rifles and shoguns - the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter s field of vision. - Compact Low Profile - Lightweight, Strong, Rustproof - Positive Windage and Elevation Locks OPTIONAL ACCESSORIES RUGER WGRS-44 WGRS-RU22 WGRS-Mini 14/30 REMINGTON WGRS-700 WGRS-742 WGRS-7400 For Ruger 44, Similar to the WGRS-RU22, but not interchangeable. Usually requires a higher front sight to.570m. WMS #1478 Fits Ruger 10/22 without drilling or tapping. A higher front sight is normally required usually.570. Also, Winchester 1300 and 1400 Slug Hunter. WMS #1469 Fit Ruger Mini-14 Ranch rifle and Mini-Thirty. (Pre 2005) WMS #20590 For Remington 700, 721 and 722. Also for Howa WMS #1451 For Remington 760 and 742. Early models will require a higher front sight. For the BDL s, use the FP-740AP. WMS #1454 For Remington models 4, 7400, 6, and 7600 WMS #1484 GHOST RING MARLIN WGRS-336 FIRESIGHT GHOST RING BROWNING WGRS-BAR OPEN SIGHT BLADES Set for Marlin 336 with proper firesight, front sight (non drill and tap). WMS #70200 For Browning BAR Auto rifle and BLR lever action. (BAR uses 9/16 ramp N bead) WMS #1457 WINCHESTER WGRS-70 For all post war Model 70 Winchesters. Will also fit the Model 670 and 770. Also, Browning A-Bolt. WMS #1445 THOMPSON CENTER WGRS- Encore WGRS-Black Diamond WGRS-T/C For T/C Encore, Omega, Triumph, Prohunter, Endeavor, Impact WMS #63304 For T/C Black Diamond WMS #66708 For T/C Contender pistol, G2 WMS #9671 AIRGUNS $ D-AG 5D-GR 5D-SH Air Guns,.22 Rifles w/ Dovetail & High Line of Sights WMS #70809 Air Guns,.22 Rifles w/ Dovetail & Low Line of Sights WMS #70810 Benjamin 340, 342, 347 / Sheridan Model C WMS #1418 MARLIN $ D-39A 5D-81 5D-336 Marlin 39A Lever Action WMS #1388 Marlin 80,81, A1 WMS #1396 Marlin Centerfire Lever Actions, 1894 WMS #70224 REMINGTON $ D-510 Remington 510, 511, 512, 513, 521T WMS #1400 WINCHESTER $ D-94/36 5D-94SE OTHER $ D-JEMS 5D-SMLE Winchester 94 Top Eject, 64, 9422 WMS # Angle Eject (Excludes Big Bore) WMS #36888 Jap, Enfield, Mauser, Springfield 03; Remington 700LH; Daisy 99, 299 WMS #1410 Enfield 1,4,5 WMS #1420 CVA WGRS-CVA Round WGRS-CVA Octagon ITHACA WGRS-37 KNIGHT WGRS- Legend WGRS-DISC WGRS-KN For CVA rifles with round barrel, Winchester X-150 Muzzleloaders. Guns with plastic front sight will need lower front sights (# Ramp) WMS #70154 For CVA rifles with octagon barrel or receiver design. (Apollo, etc.) Many are factory drilled and tapped. Also fits Traditions Deerhunter. Requires higher front sight. By drilling and tapping, this sight can be used on most 15/16 & 1 octagon barrels. WMS #44737 For Ithaca 37 pump shotgun, Browning BPS, and Maverick 88 WMS #1475 For Modern Muzzleloading Legend, Vision, Revolution & Wolverine. Fits factory drilling and tapping. WMS #51096 T-Bolt for Knight Disc and T-Bolt WMS #63303 For Modern Muzzleloading Model MK-85 Knight rifle, and Savage M-110 with flat receiver. WMS #31794 OTHER WGRS-FN WGRS-H&R WGRS-M1 CAR WGRS-Savage WGRS-54 WGRS-M/L SETS CVA WGRS-Optima RUGER WGRS-RU22 Will fit any FN type action with 1/2 hole spacing, including the Mauser FN, S&W, Crown Grade Husqvarna (CGH), and the Browning high power bolt action, and Mark X. WMS #1460 For H&R 158, 258 Topper single shot rifles. Also fits other 1/2 radius barrels or receivers and has 1 hole spacing. WMS #17778 For the 30M1 Carbine. Fits dovetail. WMS #1463 For Savage 11 with round receiver. (Needs 538M bead) WMS #70274 For any grooved receiver. WMS #70154 For large octagon barrels. Has flat base. WMS #1466 Set fits Optima, Optima Pro, Kodiak, Kodiak Pro, Wolf. Includes Firesight Front. WMS #70271 Set with WGB-570M 1/16 WMS #

11 20 21 SHORTY RAMPS $21.95 RISER BLOCKS $8.95 A shortened version of the popular streamlined ramp. It is easily installed. It can be screwed on, or sweated on WMS #1711 WMS #1712 WMS #1713 WMS #1714 Adds to the height of dovetail. Especially handy on models that require higher than normal front sight (when installing a receiver sight). Available in two widths - (WMS #13053) for Williams Streamlined ramps or ramps with a 1/4 top width - and the.340 (WMS #13054) on all standard ramps (Winchester, Remington, Savage, etc.) having this base width. Incorporates standard dovetail. STREAMLINED FRONT SIGHTS $12.95 The Williams Streamlined Front Sights are available in three widths, and a variety of heights, with industry standard dovetail. The narrow (N) width is for Williams Streamlined and Shorty ramps. The medium (M).340 width is for factory ramps such as Marlin, Remington, etc. The wide (W).531 width is for dovetailed barrels commonly found on.22 rifles and muzzleloaders. WGOS SERIES - Made from high tensile strength aluminum. Will not rust. - All parts milled - no stampings. - Streamlined and lightweight with tough anodized finish. - Dovetailed windage and elevation - Easy to adjust, positive locks. - Interchangeable blades available in four heights and four styles. WGOS HEIGHT WITH BLADE (EXCEPT OCTAGON) BLADE /4 BLADE BLADE BLADE When using the WGOS Special add.100 to the above heights. When using the WGOS Flat add.050 to the above heights. WGOS OCTAGON T/C AND CVA HEIGHT WITH BLADE BLADE.350-1/4 BLADE BLADE BLADE Convert any WGOS sight to the speed and accuracy of a ghost ring now with the light gathering of fiber optics (same height as 1/4 blade). OPTIONAL ACCESSORIES FIRESIGHT GHOST RING SQ U WDOS DOVETAIL OPEN SIGHT $21.95 Lightweight high strength alloy. Steel screws and locks. Fits standard dovetail. Anodized black finish. Rustproof. The revolutionary design of the WDOS means no more driving or hammering an open sight into the dovetail of the rifle. It simply slides into the dovetail slot in the barrel with finger tip pressure. As you tighten the locking screw it snugs the dovetail on the rifle barrel and locks the sight in place. Available in four heights with four different styles of blades - the same blades as used in the famous Williams Guide Open Sight - the U, V, SQ, and Britisher type notches. The WDOS with blade is adjustable i n height from.281 to.345. WMS #1593 The WDOS with 1/4 blade is adjustable in height from.345 to. WMS #1594 The WDOS with blade is adjustable in height from to.468. WMS #1595 The WDOS with blade is adjustable in height from.468 to.531. WMS #1596 SHOTGUN SHORTY RAMPS $28.95 Now available for the two most common 12ga. barrel diameters (.875). Available in,, and heights. *See price list for part numbers. BEAD DIAMETER WGB 1/16 or 3/32 Gold N WGB 1/16 or 3/32 Gold N WGB 1/16 or 3/32 Gold N WGB 1/16 or 3/32 Gold N WGB 1/16 or 3/32 Gold N WGB 1/16 or 3/32 Gold N WGB 1/16 or 3/32 Gold N BEAD DIAMETER WGB 1/16 or 3/32 Gold M WGB 1/16 or 3/32 Gold M WGB 1/16 or 3/32 Gold M WGB 1/16 or 3/32 Gold M WGB 1/16 or 3/32 Gold M WGB 1/16 or 3/32 Gold M WGB 1/16 or 3/32 Gold M MODELS FOR WIDE (W) WIDTHS WWGB 1/16 Gold W WWGB 1/16 Gold W WWGB 1/16 Gold.410W WWGB 1/16 Gold W WWGB 1/16 Gold.500W WWGB 1/16 Gold.538W WWGB 1/16 Gold.570W SPECIAL HEIGHTS:.538M,.570M Note: Installation of dovetailed front sights in ramps and especially dovetailed barrels almost always requires some minor fitting. Gunsmith installation is recommended

12 22 23 STREAMLINED RAMPS The Williams Streamlined Ramps have a dovetail and pleasing lines not found in any other ramp. The ramp is beautifully blued screws furnished. Available in heights of,,,,. Specify Screw On or Sweat On. SCREW ON $25.95 WMS #1690 WMS #1691 WMS #1692 WMS #1693 WMS #1694 SWEAT ON $25.95 WMS #1695 WMS #1696 WMS #1697 WMS #1698 WMS #1699 Note: The Screw On ramp has hole spacing. All other Screw On ramps have 2 hole spacing. Front sights should be ordered in (N) width. FRONT AND REAR HEIGHT RELATIONSHIPS EXPLAINED Step by step procedure for selecting open sights for tapered rifle barrels. STEP ONE: Measure diameter of barrel at Point A where front sight is to be installed. (Example:.660 Dia.). Then divide this diameter in half to determine height from center of bore to top of barrel. (Example:.660/2=.330) STEP TWO: Measure diameter of barrel at Point B where rear sight is to be installed. (Example:.820 Dia.). Then divide this diameter in half to determine height from center of bore to top of barrel. (Example:.820/2=.410). STEP THREE: Select rear sight to be used and add its height to the height determined in Step Two. (In this case we have selected the WGOS with blade rear sight which is.560 high at its center of elevation adjustment). This gives you the total height of the rear open sight from the center of the bore. (Example: =.970). STEP FOUR: You now subtract the height from the center of the bore to the top of the barrel determined in Step One (.330) from the total WILLIAMS STREAMLINED RAMP HOODS Standard: WMS #1710 $7.95 Vented: WMS #70031 $10.50 height of the rear sight determined in Step Three. (Example: =.640). This tells you that you need a front sight ramp and bead combination approximately.640 high to accommodate the rear sight. STEP FIVE: Using the Williams Sight Combination Chart you select a ramp and bead coming closest to your height needed as determined in Step Four (.640) which in this case would be the ramp with N bead giving a height of.6375 as shown on the chart. By following these procedures, sight combinations can quickly and easily be determined. When selecting ramp and bead combinations from the chart, the height need not be exact as there is ample elevation adjustment in the WGOS open sight to compensate for slight variances. Point C in the above drawing shows the proper line of sight parallel to the center of the bore when the proper combination is used. When ordering sights and you are still in doubt as to the proper combination please include the dimensions of your barrel at points A and B so we may assist you in the proper selection. Ramp Height Ramp Height Base to Dovetail SIGHT COMBINATION CHART Height from Base to Dovetail Height of Williams Bead From Top of Barrel to Top of Bead Williams Scope Mount Drill Fixture The Williams Scope Mount Drill Fixture is designed for drilling almost any receiver between the diameter of.630 to 1.535, round, flat or octagon. With a hole spacing choice of.500,.605 or.860, you can install almost any scope mount base in the industry. The scissors action of the fixture will automatically center itself. The fixture comes complete with one each #31 and #28 hardened steel lock bushings for drilling #31 (6-48) and #28 (8-40) thread sizes. When locked into position, the lock bushings will not spin in the fixture, avoiding scratches around the drilled holes. After #31 holes are drilled, you can use the #28 bushing as a tap guide for 6-48 taps. You will have fewer broken taps and perfectly straight tapped holes. The Williams Scope Mount Drill Fixture is an excellent addition to any gunsmith s workbench. New 2010 Model fits SBEII, Rem WMS #36898 $ Fronts Sight Pusher Williams Shotgun Bead Drill Fixture Another excellent tool for gunsmiths This handy fixture makes installation of front and center shotgun beads on vent rib barrels quick and easy. It allows drilling for either #45 (3-56) or #31 (6-48) bead thread sizes. Simply clamp in place and drill. The scissors action automatically centers on the rib. WMS #36899 $74.95 Aluminum Slot Blank Hard, black anodized finish. For appearance sake, use this slot blank after removing iron sight. It will also cover up most burr marks. Easy installation with one locking screw. Fits all dovetails. WMS #1951 $6.95 For Easy Installation and Adjustment of Front Sights In the past there was only one accepted way to install a front sight in a ramp pound it in with a hammer from the side. This marred a beautiful finish and loosened or damaged the ramp. The Front Sight Pusher provides the best way to install a front sight in a ramp. By equalizing the pressure on a ramp and sight, it permits installation without marring and eliminates excessive pressure on the ramp. Sight is smoothly and accurately moved into exact position. WMS #1953 $

13 24 25 The Williams QC Side Mount permits the shooter to have both scope and iron sight always available for instant use. From the same base, shooter has his choice of high rings that place scope directly over the bore or in the offset position. Williams Side Mounts have positive locks. Using these locks, the mount becomes a one piece mount. Used optionally, the mount is quickly detached. The eccentric bushing in the base of the Williams QC Mount provides a limited amount of windage adjustment to insure a good mounting job. Mounting Plates: Mounting Plate for Carbine: (Attach with 8-40 fillister screws). Use the Williams SM-740 side mount base with this mounting plate. Scope can be offset or high overbore. Mounting Plate for SMLE No. 1: (Attach with 8-40 fillister head mounting screws). This Mounting plate is supplied with long 8-40 fillister head screws to replace SM-70 short screws. Use the SM-70 base. Mount can be installed offset or central overbore. The QC side mount requires no drilling or tapping for the Model 94 (top eject type) Winchesters. Drilling & tapping is required on the new Side Eject Model 94 Winchesters. On the Model 336 Marlins, drill and tap just one hole. SM-70 FITS: Winchester 54, 70, 670, 770 Remington 600, 660, 700, 721, 722, Seven Mossberg 800, 3000 Weatherby MK-V, Vanguard Husqvarna Crown Grade Interarms Mark X, Howa 1500/1700 Savage 110, 111 BSA Majestic, Monarch, CF-2 U.S. Military 1903/1903-A3, 1917 Enfield* Mausers 91, 93, 94, 95, 96, 98* British SMLE #1, (Round Receiver)** Japanese M38 (6.5), M99 (7.7) Swiss 1911 (7.5) *Request Shim Pack with mount **Requires Mounting Plate SM-71 FITS: Winchester 71, 86, 92, 94*, 95 Remington 14, 141 Marlin 36, 336, 93, 444, 1895 Russian 1891 (7.62) British SMLE #4 & 5 (Flat Receiver) *Use SM-71 on Model 94 when using FP or 5D receiver sight. Request proper 94 screws with mount. SM-94 FITS: Winchester 94*, 94AE* Marlin 336*, 30AS*, 444*, 1895* *Use SM-71 when using FP or 5D receiver sight. SM-340 FITS: Savage 322, 325, 340*, 840 *Most 340 s are factory drilled and tapped. *SEE NEXT PAGE FOR RING SELECTION. *ALL SIDE MOUNTS AND RINGS SUBJECT TO STOCK ON HAND SM w/ REGULAR RINGS SM-94/375 ON 94 BIG BORE SM-71 SIDE MOUNT ON 94 SM-94/36 ON 94 SM w/ HCO RINGS EXTENSION Extension Ring Size 1 (Unless otherwise indicated, only one extension furnished in set) *Split sleeves to reduce 1 ring size to 7/8 and accommodate 7/8 scope tube. (Because of the many ring combinations available, mount and rings are packaged separately) NOTE: Limited quantities of our old style solid 7/8 and 3/4 rings are available. Also, a limited amount of our split and HCO rings in 26mm diameter are available. Prices upon request. WILLIAMS ECCENTRIC BUSHING All Williams QC Mounts have an eccentric bushing with a collar that can be turned with a screwdriver or similar object, to obtain preliminary adjustment and ensure a good mounting job. It is not necessary to remove bushing to turn it, and it is not necessary to remove mount to obtain windage adjustment. HCO Central Overbore Ring Size 1 (For Side Bases Only) A variation of the HCO that we occasionally run into is where a shooter wants to make use of his right shoulder and his left eye in which case the HCO rings can be reversed 180 degrees, not only positioning the scope high, but offset to the left. QC SIDE MOUNT - OFFSET - OR OVERBORE From the same base, your choice of having scope in the offset or the central overbore position. In either case, you have simultaneous use of scope and iron or receiver sight. These sighting combinations are becoming more popular every day. SPLIT* Split Ring Size 1 SPECIAL HIGH RINGS Size 1 These rings have a special long threaded stud in the base, and a subring base of approximately.200 thick to accommodate the large scopes that heretofore could not be mounted low central overbore or on rifles having an especially heavy barrel. (Also available in HCO Style) CAM-LOCK THUMB NUT BUSHING The cam-lock thumb nut bushing pulls the threaded stud down to a positive lock, locking it exactly the same each time, and assuring the return to absolute zero

14 26 27 Nos. 1 & 2 No. 3 No. 4 Front Front Rear GOLD OR SILVER SHOTGUN SIGHTS: Bead Shank Model Thread Dia. Length No No No No /32 TAPS No High Speed Drill Only (For 3-56) WMS #1760 No High Speed Drill Only (For 6-48) WMS #1761 No High Speed Drill Only (For 8-40) WMS #1762 No High Speed Drill Only (For 10-32) WMS #1763 CARBON 3-56 Carbon Tap Only WMS # Carbon Tap Only WMS # Carbon Tap Only WMS #1759 HIGH SPEED 6-48 High Speed Tap Only # High Speed Tap Only # High Speed Tap Only #1766 GUN SCREWS: STANDARD IN THE GUN INDUSTRY (100 PER PACKAGE) 6-48 FILLISTER HEAD SCREWS Length, Head Thickness.065, Head Diameter.198 Length.350, Head Thickness.100, Head Diameter.198 Length.425, Head Thickness.100, Head Diameter.198 Length.475, Head Thickness.100, Head Diameter.198 Assortment of the Above 6-48 PLUG SCREWS Length HEADLESS SET SCREWS Lengths:.275,.400,.575 Assortment of the above SHOP OUR HUGE INVENTORY OF WILLIAMS GUN SIGHTS KEEP UP WITH ALL OF THE LATEST PRODUCT RELEASES REQUEST THE LATEST PRODUCT CATALOG SETS 6-48 High Speed Tap and No. 31 High Speed Drill Set # High Speed Tap and No. 28 High Speed Drill Set # High Speed Tap and No. 21 High Speed Drill Set #1769 Store, Smith and Gun Crank Service Kit Selected for greatest demand. 6-48, 8-40 and screws and taps have long since become the main general repair standbys. Any part of assortment is available. Additional plastic cases also available. WMS # only Windage Screws 12 only x.350 F.H. 12 only x F.H. 12 only x.335 O.H. 12 only x.170 F.H. 12 only x.260 T.H. 6 only x F.H. Firing Pin Kit This kit takes care of 95% of all single and double barrel firing pin replacements. Contains 25 numbered firing pins of different styles. WMS # only x.475 F.H. 12 only x.125 H.L. plug screw 12 only x.090 H.L. plug screw 12 only x.187 H.L. set screw 1 only Drill & Tap set 1 only Drill & Tap set NO. 1 Firing Pin: #1968 Fits Stevens 94B, 94C, 107C, 94B1, 107B1, and other Savage-Stevens single barrels made on contract in recent years. #1968 No. 2 Firing Pin: #1969 Fits obsolete Stevens single barrels. No. 3 Firing Pin: #1970 Fits Iver Johnson Champion and matted rib single made for Montgomery Ward under Western Field brand. No. 4 Firing Pin: #1970 Fits double barreled Fo1 Model B, Stevens Model 515 stamped 5000 on frame, 8-40 FILLISTER HEAD SCREWS Length, Head Thickness.100, Head Diameter.247 Length.350, Head Thickness.100, Head Diameter.247 Length.475, Head Thickness.100, Head Diameter.247 Assortment of the Above 8-40 OVAL HEAD COUNTERSUNK Length.335, Head Diameter 8-40 PLUG SCREWS Length PLUG SCREWS Length FILLISTER HEAD SCREWS Length.400, Head Thickness.125, Head Diameter no number on frame, A A-3111 stamped 5100, 311A, or 530A on frame, or doubles made for other firms by Savage or Stevens. No. 5 Firing Pin: #1972 Fits Harrington and Richardson Model 48, all past and present models and any singles made by H&R for Sears-Roebuck, Montgomery Ward, etc. Order by Number Rebound Springs, No Charge WMS #11542 RECEIVE TECHNICAL SUPPORT AT : SUPPORT@WILLIAMSGUNSIGHT.COM 26 27

15 Lapeer Rd. Davison, MI Toll Free: (800) Fax: (810)