Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions. For safe and effective operation, please read these instructions fully before use.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions. For safe and effective operation, please read these instructions fully before use."

Transcription

1 Dust RIGHT Shop Vacuum Dust Hose Reel Instructions For safe and effective operation, please read these instructions fully before use.

2 GENERAL SAFETY WARNINGS This tool is designed for specific applications as defined in the instructions and should not be modified and/or used for any other applications. Before using the Shop Vacuum Dust Hose Reel read, understand and follow all instructions and safety information provided. KEEP THESE INSTRUCTIONS. > For any tool that is used in conjunction with this product always read, understand and follow the instructions and safety warnings for that tool. > Before using this product, review and verify that all tools used with it are in proper working order as defined by the tool s owner s manual. > All safety equipment must be installed and working properly as defined by the tool s owner s manual. > Do not use this product until you have read the provided instructions and warnings and are confident you understand them. > Always wear safety glasses in compliance with ANSI safety standards and hearing protection and follow all standard shop safety practices including: Keep your work area well lit and clean. Use dust collection tools and dust face masks to reduce exposure to dust. Use accessory safety equipment such as feather boards, push sticks, and push blocks whenever appropriate. Do not use power tools in explosive environments, e.g. in the presence of flammable liquids, fumes or dust. Keep children and bystanders away while operating your tools. Maintain proper footing at all times and do not overreach. Do not force the tool. Unplug all power tools before making any adjustments or changing accessories. > Remain alert and use good judgment when using this tool. Do not use this tool if you are in any way impaired by medications, alcohol, drugs or fatigue. > Dress appropriately and remove all jewelry, secure loose clothing and tie up long hair before using this tool. > It is the sole responsibility of the purchaser of this tool to ensure that any third party reads and agrees to all the safety precautions outlined in this manual prior to using the tool. > Maintain these instructions and warnings as long as you own the tool. Keep in a place where they will be readily available for reference. > The user assumes all risk for the proper use of this tool and for ensuring product suitability for intended application. > Do not attempt to lift more than you are physically able. Get help if necessary. Use proper lifting techniques. > These warnings and instructions do not represent the total of all information available regarding tool safety, use and technique. Always seek out opportunities to learn more and improve your skills and knowledge. SPECIFIC SAFETY WARNINGS > Failure to mount the Hose Reel according to the included instructions could result in personal injury or damage to property. > Do not mount the Hose Reel higher than your own shoulder height. > Do not leave uncoiled dust hoses on the floor as they can cause tripping hazards. > The Shop Hose Reel is intended for dry vacuuming only. Vacuuming wet materials will cause hose clogging > Do not hang or allow anyone else to hang from the Hose Reel. > Do not hang or coil objects other than the specified Shop Vacuum Hose from the Hose reel. 2

3 1 3 2 Base Assembly Assembly Base Assembly 1. Attach the Left Hub/Side Assembly (1) to the Base Plate (2), using 1/"-20 x /8" Panhead Screws () and 1/" Lock Nuts (). The Side Plate goes on the outside of the tabs on the Base Plate (2). 2. Attach the Right Side Plate (3) to the Base Plate (2), using 1/"-20 x /8" Panhead Screws () and 1/" Lock Nuts (). The Side Plate goes on the outside of the tabs on the Base Plate (2). PARTS LIST Quantity 1 Left Hub/Side Assembly 1 2 Base Plate 1 3 Right Side Plate 1 1/"-20 x /8" Panhead Screw 22 1/" Lock Nuts 22 3

4 PARTS LIST Quantity Quantity 6 Right Hub 1 7 Internal Flange Pivot 1 8 1/"-20 x 7/8" Flat-Head Screw 3 9 Right-Hand Swivel /"-20 x 3/" Flat-Head Screw 2 11 Four-Star Knob 1 12 Right-Hand Clamp 1 13 /16"-18 x 1 " Hex Bolt 1 1 Handle 1 1 /16-18 Lock Nut 1 16 Center Hub 1 17 Washer 1 18 Hose Retaining Strap 1 19 #8-32 x /8" Panhead Screw 1 20 #8-32 Lock Nut /8" x 2" Lag Screw 22 3/8" Washer Right Hub Assembly - Shown without Base Plate (2) and Left Hub/Side Assembly (1) attached for clarity Right Hub Assembly 1. Working from the inside face of the Right Hub (6), fit the Internal Flange Pivot (7) through the center hole and attach, using three 1/"-20 x 7/8" Flat-Head Screws (8) and 1/"-20 Lock Nuts (). 2. From the other side of the Right Hub (6), slide the Right-Hand Swivel (9) onto the Internal Flange Pivot (7) until the narrow end of the Right-Hand Swivel (9) piece seats in the hole in the center of the Right Hub (6). 3. Fit the Right-Hand Clamp (12) onto the outside face of the Right Side Plate (3), using the center and fastener holes as a guide, and attach the clamp, using two 1/"-20 x 3/" Flat-Head Screws (10) and 1/"-20 Lock Nuts (). Thread the Four-Star Knob (11) into the Right-Hand Clamp (12), but don t tighten.. Position the Right Hub assembly on the inside of the Right Side Plate (3) so the Right-Hand Swivel is against the Right Side Plate and the Internal Flange Pivot (7) fits into the center hole and through the opening in the Right-Hand Clamp (12). Tighten the Four-Star Knob (11) to hold the assembly together (but don t overtighten).. From the inside of the Right Hub (6), insert the /16"-18 x 1 " Hex Bolt (13)through the Internal Flange Pivot (7). Thread the Handle (1) onto the hex bolt and secure with the /16"-18 Lock Nut (1).

5 Center Hub Assembly Center Hub Assembly 1. If you fully tightened the screws and nuts connecting the Right and Left Side Plates to the Base Plate, loosen them a bit to provide working space for installing the Center Hub (16). 2. Position the Center Hub (16) between the Right and Left Hubs, taking care to align the fastener holes/slots.. Retighten the screws and nuts connecting the Right and Left Side Plates to the Base.. Attach the Hose Retaining Strap (18) to the inside face of the Right Hub (6), using the #8-32 x /8" Panhead Screw (19), Washer (17) and #8-32 Lock Nut (20). 3. Attach the Center Hub (16) to the Right and Left Hubs, using 1/"-20 x /8" Panhead Screws (), Washers (17) and 1/"-20 Lock Nuts (). Work from the outside faces of the hubs, so that the screw heads and washers are on the outside and the nuts are against the flange of the Center Hub (16).

6 Fig. 1 Mounting to Wall Studs 1. The Hose Reel must be mounted to wall studs spaced 16" on center. 2. Mark the locations for the top two mounting screws and drill pilot holes for 3/8" x 2" Lag Screws (21). 3. Fit a 3/8" Flat Washer (22) onto each screw. Drive the screws into the studs until they re about 1" from being fully seated.. Decide whether you want the Handle of the Hose Reel to be on the right or the left side. Orient the Hose Reel as desired and lift it onto the top two 3/8" x 2" Lag Screws (21). Fig. 1.. Mark the locations for the bottom two 3/8" x 2" Lag Screws (21), using the bottom keyhole slots in the Base Plate (2) as a guide. 6. Lift the Hose Reel off the top two Lag Screws (21) to remove it. Drill pilot holes for the lower set of Lag Screws (21). 7. Return the Hose Reel onto the top two Lag Screws, making sure that the 3/8" Washers (22) make it through the keyhole openings in the Base Plate (2). Check that the Hose Reel is level and then drive the 3/8" x 2" Lag Screws (21) until they are fully tightened. Fig. 1. Inset. 8. Fit a 3/8" Flat Washer (22) onto each of the remaining two 3/8" x 2" Lag Screws (21) and drive the screws into the lower two pilot holes to fully secure the Hose Reel. Fig. 2 6

7 Fig. 3 Attaching Hoses 1. Attach your 11 2" hose to a port that has a 21 " outside diameter on one end. 2. Press the 21 " OD end of the port into the Shop Vacuum Port on the inside of the Hose Reel. Fig Unscrew the Hose Retraining Strap (18) from the Right Hub (6) and fit the strap around the hose.. Make sure there s enough slack in the hose to prevent kinking and reattach the Hose Retraining Strap (18) to the Right Hub (6). Fig. 3.. The Shop Vacuum Port on the outside of the Hose Reel has an OD of 21 2" and an ID of 21 ". You can fit 21 2" hose directly onto the port and secure it with a hose clamp, or you could use a fitting like the 21 2" Swivel Fitting for Shop Vacs (31660, sold separately). Controlling Unwinding Speed 1. Once the 11 2" hose is connected, loosen the Four-Star Knob (11) and use the handle to wind the hose fully onto the Hose Reel. The reel can accommodate up to 0' of 11 2" hose. 2. Gently pull the hose to begin unwinding. Tighten or loosen the Four-Star Knob (11) to adjust the resistance. Fig.. 11 Check Rockler.com for updates. If you have further questions, please contact our Technical Support Department at or Fig. 7

8 22 Rev 01/17 Distributed by Rockler Companies, Inc Rockler Woodworking and Hardware

Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions

Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions Dust RIGHT Shop Vacuum Dust Hose Reel Instructions Review full instruction manual prior to use for important safety information. Always check Rockler.com to confi rm that you are using the most recent manual

More information

Disc Sander Angle Jig Instructions

Disc Sander Angle Jig Instructions Disc Sander Angle Jig Instructions Congratulations on the purchase of your new Disc Sander Angle Jig! It allows you to sand precise angles on the end of your workpiece and to sand perfectly round circles.

More information

Ellipse/Circle Router Jig Instructions

Ellipse/Circle Router Jig Instructions Ellipse/Circle Router Jig Instructions The Ellipse/Circle Router Jig allows you to use your plunge router to easily cut precise ellipses and circles for picture frames, mirrors, signs and more. For safe

More information

3 1 2" Louver Template Set Instructions

3 1 2 Louver Template Set Instructions 3 " Template Set Instructions Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual version for your

More information

3 IN 1 HEAVY DUTY TILE CUTTER. Model Visit our website at:

3 IN 1 HEAVY DUTY TILE CUTTER. Model Visit our website at: 3 IN 1 HEAVY DUTY TILE CUTTER Model 41711 ASSEMBLY Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in

More information

Variable Speed Cast Iron Midi Wood Lathe

Variable Speed Cast Iron Midi Wood Lathe 01936 Variable Speed Cast Iron Midi Wood Lathe Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. 1 Technical Data Input voltage

More information

Wall Mount Assembly and Mounting Guide (55 /84 )

Wall Mount Assembly and Mounting Guide (55 /84 ) Microsoft Surface Hub Wall Mount Assembly and Mounting Guide (55 /84 ) For mounting on a wall with wood studs These instructions assume wood-stud wall construction with 2-by-4 studs spaced 16 inches apart,

More information

LCD LIFT Flat Panel Display System Installation Manual. Table of Contents

LCD LIFT Flat Panel Display System Installation Manual. Table of Contents LCD LIFT Flat Panel Display System Installation Manual Table of Contents Page Installation Overview... 2 Trim Ring Installation... 3 LCD Lift Installation....4 Actuator Switch Installation.5 Top Plate

More information

ASSEMBLY AND OPERATING INSTRUCTIONS

ASSEMBLY AND OPERATING INSTRUCTIONS Work Bench 91835 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights reserved.

More information

The DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly.

The DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly. The DeltaGrip System Safety and Operating Instructions Trigger Air Supply Connection Handle Assembly Air Line Assembly Punch Die Pneumatic Diaphragm Assembly Shackle, Pin & Jam Nut Jaw Frame Shoulder Screw

More information

FORD MOUNT INSTALLATION INSTRUCTIONS

FORD MOUNT INSTALLATION INSTRUCTIONS WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 64289 June 1, 2003 FORD MOUNT INSTALLATION INSTRUCTIONS Bronco (4X4 only) F-150 (4X4 only), F-250/350 Super Duty 1980 1991 Model No.

More information

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.

More information

MI MI OPERATING MANUAL

MI MI OPERATING MANUAL MODEL NO.: MI-76100 MI-76150 OPERATING MANUAL RULES for SAFE OPERATION MAGNUM INDUSTRIAL MI-76100 and MI 76150 DRILL PRESSES To help ensure safe operation, please take a moment to learn the how to operate

More information

MantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before

More information

1 HP Dust Collector. Operator s Manual. Record the serial number and date of purchase in your manual for future reference.

1 HP Dust Collector. Operator s Manual. Record the serial number and date of purchase in your manual for future reference. Model: 60-100 1 HP Dust Collector Operator s Manual Record the serial number and date of purchase in your manual for future reference. Serial Number: Date of purchase: For technical support or parts questions,

More information

Heavy Duty Mechanic s Kit

Heavy Duty Mechanic s Kit Heavy Duty Mechanic s Kit 00 Safety Warning Read all instructions and safety warnings prior to operation. Failure to do so could result in equipment damage, personal injury or even death. CAUTION 00: FAILURE

More information

OPERATOR'S MANUAL ROUTER MOUNTING KIT

OPERATOR'S MANUAL ROUTER MOUNTING KIT OPERATOR'S MANUAL MOUNTING KIT 4950301 (FOR USE WITH BT3000 AND BT3100 TABLE SAWS) Your new router mounting kit has been engineered and manufactured to Ryobi's high standard for dependability, ease of

More information

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880

More information

Powermatic Model 31A Combination Belt-Disk Sander

Powermatic Model 31A Combination Belt-Disk Sander OPERATING PROCEDURE FOR: Powermatic Model 31A Combination Belt-Disk Sander INTRODUCTION: The combination belt-disk sander is used to sand the edges of boards. It can be used to smooth the edge or to remove

More information

MOUNT KIT. Dodge Ram 2500/3500 (All) Dodge Ram 2500/3500 (Gasoline only) Installation Instructions CAUTION

MOUNT KIT. Dodge Ram 2500/3500 (All) Dodge Ram 2500/3500 (Gasoline only) Installation Instructions CAUTION November 15, 2014 Lit. No. 41376, Rev. 05 33884 MOUNT KIT Dodge Ram 2500/3500 (All) 2010-12 Dodge Ram 2500/3500 (Gasoline only) 2013 - Installation Instructions Read this document before installing the

More information

COMPLEX GRINDER OF MILL& DRILL

COMPLEX GRINDER OF MILL& DRILL COMPLEX GRINDER OF MILL& DRILL MODEL: MR-F6 OPERATING INSTRUCTION PLEASE REMEMBER 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk

More information

ABM International, Inc.

ABM International, Inc. ABM International, Inc. Lightning Stitch required 1 1.0: Parts List head and motor assembly (Qty. 1) Reel stand (Qty. 1) Needle bar frame clamp (Qty. 1) Motor drive (Qty. 1) 2 Cable harness with bracket

More information

Workbench with peg board & drawer

Workbench with peg board & drawer Workbench with peg board & drawer Model 95387 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. Tools not included.

More information

TITAN2-EDGE Public Access Computer Station Dual Track

TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the

More information

Dual Arm Tilt LCD Mount

Dual Arm Tilt LCD Mount Installation Manual model # 51324 M o u n t i n g S y s t e m s Dual Arm Tilt LCD Mount Fits Displays 13 to 32 Supports Up to 50 lbs (23 kgs) Projection from Wall from 3 to 17 Meets VESA Standards 50/75/100,

More information

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.

More information

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty Please read this owner s manual before use and keep it at hand for reference. OWNER S MANUAL Safety Important safety instructions for using the INCRA Miter5000 Before using the INCRA Miter5000, read and

More information

CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS

CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Assembled cabanas are large & heavy. Assemble at place of use. CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Step 1 CAUTION: To avoid damage to the finish of your Cabana frame, prepare a smooth, non-scratch

More information

HAND HELD SAW W MILL

HAND HELD SAW W MILL HAND HELD SAW W MILL 92247 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All

More information

3HP BAG CYCLONE DUST COLLECTOR MANUAL

3HP BAG CYCLONE DUST COLLECTOR MANUAL 3HP BAG CYCLONE DUST COLLECTOR MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered

More information

10" Wet Tile Cutting Saw

10 Wet Tile Cutting Saw 8035735 10" Wet Tile Cutting Saw Owner s Manual Read and understand all instructions before operation. Keep this manual for future reference pg. 2 SPECIFICATIONS ITEM DESCRIPTION Overall Dimensions (saw

More information

OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 1813 BENDING TABLE FOR 881 HYDRAULIC BENDER

OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 1813 BENDING TABLE FOR 881 HYDRAULIC BENDER OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 1813 BENDING TABLE FOR 881 HYDRAULIC BENDER Read and understand this material before operating or servicing this bender. Failure to understand how to safely

More information

Plans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com

Plans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com Easy-to-Build Full-size Deluxe Murphy Bed Plan Build a full-size Deluxe Murphy Bed complete with decorative molding and matching side cabinets! Plans For more plans, tools and hardware visit rockler.com

More information

TorqueMaster Replacement Spring

TorqueMaster Replacement Spring TorqueMaster Replacement Spring Installation Instructions NOTE: Use these installation instructions in conjunction with the TorqueMaster Repair / Replacement Spring Program literature. Copyright 999 Wayne-Dalton

More information

15 Planer Stand. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

15 Planer Stand. Model Due to continuing improvements, actual product may differ slightly from the product described herein. 15 Planer Stand Model 96316 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

VIEWPOINT ALUMINUM RUNNING BOARD TOYOTA RAV4

VIEWPOINT ALUMINUM RUNNING BOARD TOYOTA RAV4 PARTS LIST: VIEWPOINT ALUMINUM RUNNING BOARD 1 Driver/Left Running Board 4 10-1.5mm x 50mm T-Bolt 1 Passenger/Right Running Board 12 10mm Plastic Retainers 1 Driver/Left Bracket 2 10-1.50mm x 40mm Hex

More information

26 GARDEN CART ASSEMBLY & OPERATING INSTRUCTIONS. Rev 07/03

26 GARDEN CART ASSEMBLY & OPERATING INSTRUCTIONS. Rev 07/03 GARDEN CART 304 ASSEMBLY & OPERATING INSTRUCTIONS 3 Rev 07/03 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below: Model Serial No. Purchase

More information

ATV Disc OWNER S MANUAL

ATV Disc OWNER S MANUAL ATV Disc OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

18 PIECE HOLE SAW SET

18 PIECE HOLE SAW SET 18 PIECE HOLE SAW SET 94665 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

HEIGHT ADJUSTABLE WORKBENCH

HEIGHT ADJUSTABLE WORKBENCH HEIGHT ADJUSTABLE WORKBENCH Model 91 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in

More information

8 x 10 GREENHOUSE. Visit our website at:

8 x 10 GREENHOUSE. Visit our website at: 8 x 10 GREENHOUSE With Two Vents 9390 Assembly Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.

More information

MOUNT KIT. Nissan Titan XD. Installation Instructions CAUTION. Read this document before installing the snowplow. CAUTION

MOUNT KIT. Nissan Titan XD. Installation Instructions CAUTION. Read this document before installing the snowplow. CAUTION September 1, 2017 Lit. No. 76667, Rev. 00 35067 MOUNT KIT Nissan Titan XD 2018 - Installation Instructions Read this document before installing the snowplow. See your sales outlet/website for specific

More information

Quick Set Dovetail Jig

Quick Set Dovetail Jig Quick Set Dovetail Jig FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500359 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT

More information

ALF109 Instruction Manual

ALF109 Instruction Manual ALF109 Instruction Manual Scan here to view product demo and install videos or visit san.us/101 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520

More information

MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS

MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Your new Model T28000 Heavy-Duty

More information

STEEL BLASTER CABINET FLOOR MODEL

STEEL BLASTER CABINET FLOOR MODEL STEEL BLASTER CABINET FLOOR MODEL 39170 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 1998 by Harbor Freight Tools.

More information

Fixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved

Fixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved Fixed Wall Arm Installation Guide Part number 2002003-001 Rev E 2012 PolyVision Corporation All rights reserved Table of contents Important Safety Instructions... 3 Overview... 4 Important considerations...

More information

OWNER S MANUAL. But that s just half the story. The fence INCRA Miter Gauge really does work

OWNER S MANUAL. But that s just half the story. The fence INCRA Miter Gauge really does work From the makers of the INCRA JIG! Please read this owner s manual before use and keep it at hand for reference. Your new INCRA Miter Gauge at long last solves that frustrating problem all too familiar

More information

Instruction Manual. Manual de instrucciones. Guide d utilisation ET PMET Rev 808

Instruction Manual. Manual de instrucciones. Guide d utilisation ET PMET Rev 808 Instruction Manual Manual de instrucciones Guide d utilisation ET2025 PMET2025-8 Rev 808 www.arrowfastener.com GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed

More information

INSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM. 1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets

INSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM.  1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2015 Wayne Dalton, a division of Part

More information

Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine

Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe mounting of MP90 equipment on the anesthesia machine. WARNING: USE OF MOUNTING

More information

50 Gordon Drive, Rockland, Maine sherplows.com MOUNT KIT. Nissan Titan XD. Installation Instructions CAUTION

50 Gordon Drive, Rockland, Maine sherplows.com MOUNT KIT. Nissan Titan XD. Installation Instructions CAUTION Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 77106 August 15, 2017 Lit. No. 76664, Rev. 00 MOUNT KIT Nissan Titan XD 2018 - Installation Instructions Read this document

More information

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS II system consists of three

More information

southpaw enterprises, inc.

southpaw enterprises, inc. Store these instructions in a safe place or with the enclosed maintenance checklist In-FUN-ity Climbing System Assembly Examples This example sheet is intended to supplement the instruction sheets that

More information

Side-of-Pole Mount for 4 Modules (SPM4) For Module Type D

Side-of-Pole Mount for 4 Modules (SPM4) For Module Type D Side-of-Pole Mount for 4 Modules (SPM4) For Module Type D ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 060712-7 Side-of-Pole Mount for 4 Modules (SPM4) For Module Type

More information

SAN12 ( <00>)

SAN12 ( <00>) SAN12 (6904-002020 ) Wood 13mm (1/2 in.) 3mm (1/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East,

More information

GCX Mounting Assembly Installation Guide. Drager Narcomed GS Anesthesia Machines with Philips MP60/70 IntelliVue Patient Monitor Kit

GCX Mounting Assembly Installation Guide. Drager Narcomed GS Anesthesia Machines with Philips MP60/70 IntelliVue Patient Monitor Kit GCX Mounting Assembly Installation Guide Drager Narcomed GS Anesthesia Machines with Philips MP60/70 IntelliVue Patient Monitor Kit Philips MP60/70 IntelliVue Patient Monitor AGM Philips M8048A Flexible

More information

Important Loading Information. Tools Required. Meridian Lateral Files Instructions

Important Loading Information. Tools Required. Meridian Lateral Files Instructions Y Meridian Lateral Files Instructions! WARNING Failure to observe stated capacities below will result in unsafe usage conditions, causing possible product damage or personal injury. Important Loading Information

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Mast R Lift II. User Manual for Incra Mast-R-Lift II. Suggested Router Bit Speeds. Model #02120

Mast R Lift II. User Manual for Incra Mast-R-Lift II. Suggested Router Bit Speeds. Model #02120 Mast R Lift II User Manual for Incra Mast-R-Lift II Model #02120 61 Forest Plain Road Oro-Medonte, Ontario, Canada L3V 0R4 Toll Free: 1-866-272-7492 Email: jessem@jessem.com Website: www.jessem.com Thank

More information

FSCTD Dual Back to Back Flat Screen Ceiling Mount

FSCTD Dual Back to Back Flat Screen Ceiling Mount Page 1 of 6 FSCTD Dual Back to Back Flat Screen Ceiling Mount The FSCTD Dual Back to Back Flat Screen Ceiling Mount is designed to suspend a monitor from a single flange mounted to structure in the ceiling.

More information

Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays

Installation and Assembly: In-wall Mount for 32 to 71 Flat Panel Displays Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays Model# Display size range IM760P, IM760P-S 32" to 71" (81 to 180 cm) IM760PU, IM760PU-S 32" to 65" (81 to 165 cm) This product

More information

WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623

WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623 WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623 Assembly, Operating, and Maintenance Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product

More information

GS Single Counterweight Kit

GS Single Counterweight Kit Philips IntelliVue MP40/50/60/70 Or MX400/450/600/700/800 Patient Monitor GCX Mounting Assembly Installation Guide Drager Narcomed GS Anesthesia Machines with Philips IntelliVue MP40/50/60/70, MX400/450/600/700/800

More information

6 BENCH GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

6 BENCH GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS 6 BENCH GRINDER Model 90003 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.

More information

ATTACH WALL PLATE TO WALL

ATTACH WALL PLATE TO WALL DANGER! The Elite ar m contains high p r e s s u r e g a s s p r i n g s. T h e following cautions MUST be observed to avoid serious injury. 1. Do not attempt to adjust your Elite arm until everything

More information

ARROW SAW PRECISE CUT 8000 RPM WITH DUST COLLECTING ATTACHMENT INSTRUCTION BOOK MODEL NO

ARROW SAW PRECISE CUT 8000 RPM WITH DUST COLLECTING ATTACHMENT INSTRUCTION BOOK MODEL NO ATTENTION If any components of this unit are broken or the unit does not operate properly, please contact Cabela s Customer Service. Retail Store Purchases: 1-800-905-2731 (U.S. & Canada) Catalog and Internet

More information

Electric Chainsaw Sharpener

Electric Chainsaw Sharpener FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications

More information

PLA50B Instruction Manual

PLA50B Instruction Manual PLA50B Instruction Manual We are here to help! Please contact Customer Service with any questions. Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East, and Africa: +

More information

Kawasaki Teryx 750 Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions.

Kawasaki Teryx 750 Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions. Owner s Manual Model: Kawasaki Teryx 750 Kawasaki Teryx 750 Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions. Safety Instructions Cab Kit Contents Hardware

More information

Preference Collection 5543 Central Console INSTALLATION GUIDE

Preference Collection 5543 Central Console INSTALLATION GUIDE Preference Collection 5543 Central Console INSTALLATION GUIDE WARNING Failure to install the 5543 as described in this installation guide may cause the unit to collapse, resulting in serious injury to

More information

MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS

MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Designed to work exclusively with the

More information

8" BENCH SHEAR INSTRUCTIONS. Item #20198

8 BENCH SHEAR INSTRUCTIONS. Item #20198 8" BENCH SHEAR INSTRUCTIONS Item #20198 Your EASTWOOD 8 BENCH SHEAR for metal cutting is designed for quickly and cleanly cutting mild steel, aluminum and other metals. Torque-amplifying, compound linkage

More information

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

Instructions for Stone Cutting Machine

Instructions for Stone Cutting Machine Technical data Kg. Instructions for Stone Cutting Machine SCM600 3HP 2800rpm IP55 SCM800 3HP 2800rpm IP55 SCM1000 2800rpm IP55 SCM1200 2800rpm IP55 L=600 B=85(165) L=800 B=85(175) 500x510 0 or 45 600lt/h

More information

MOUNT KIT PERSONAL PLOW. Jeep Liberty Installation Instructions. CAUTION Read this document before installing the snowplow.

MOUNT KIT PERSONAL PLOW. Jeep Liberty Installation Instructions. CAUTION Read this document before installing the snowplow. April 1, 2008 Lit. No. 28429, Rev. 02 3713-1 MOUNT KIT PERSONAL PLOW Jeep Liberty 2002-07 Installation Instructions Read this document before installing the snowplow. See your sales outlet/web site for

More information

Miter Fold Dado Set Instructions

Miter Fold Dado Set Instructions Miter Fold Dado Set Instructions Effective April 2017 THIS PRODUCT IS INTENDED FOR EXPERIENCED WOODWORKERS ONLY; review full manual instructions prior to use for important safety information. Always check

More information

3 POINT HITCH LOGSPLITTER

3 POINT HITCH LOGSPLITTER 3 POINT HITCH LOGSPLITTER OPERATOR S MANUAL AND PARTS LIST TABLE OF CONTENTS SECTION PAGE 1. GENERAL INFORMATION 1 2. SAFETY GUIDELINES 2 2.1 DEFINITIONS 2 2.2 SAFE OPERATING PROCEDURE 3 3. LOG SPLITTER

More information

Model Assembly & Operating Instructions

Model Assembly & Operating Instructions 30 SHEAR BRAKE ROLL Model 05907 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the

More information

Installation and Assembly: Flat Panel Pull-out Swivel Wall Mount

Installation and Assembly: Flat Panel Pull-out Swivel Wall Mount Installation and ssembly: Flat Panel Pull-out Swivel Wall Mount Models: SP850-V2X2 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerlessmounts.com ISSUED: 01-17-12 SHEET

More information

ETX Powered Loudspeaker Accessories

ETX Powered Loudspeaker Accessories ETX Powered Loudspeaker Accessories ETX-BRKT10, ETX-BRKT12, ETX-BRKT15, ETX-TCA-S, ETX-TCA-L, and ETX-BRKT35 en Installation Guide en 3 Table of contents 1 Safety 4 2 Installation 6 2.1 Wall mount bracket

More information

Blizzard, PO Box , Milwaukee, WI UNDERCARRIAGE KIT

Blizzard, PO Box , Milwaukee, WI UNDERCARRIAGE KIT Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com December 1, 2013 Lit. No. 95041, Rev. 01 33887-1 UNDERCARRIAGE KIT Dodge Ram 2500/3500 Gasoline 2010 - Dodge Ram 2500/3500 Diesel

More information

600G2 Internal Sliding Adapter Panel Shelf Instructions

600G2 Internal Sliding Adapter Panel Shelf Instructions Instruction Sheet 860391986 Issue 6, February 2013 SYSTIMAX Solutions 600G2 Internal Sliding Adapter Panel Shelf Instructions General The SYSTIMAX 600G2 adapter panel shelf is 19-inch wide x 1.75-inch

More information

Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine

Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe installation of MP40/50/60/70 mounting equipment on the anesthesia machine.

More information

Shop Fox Oscillating Spindle Sander

Shop Fox Oscillating Spindle Sander OPERATING PROCEDURE FOR: Shop Fox Oscillating Spindle Sander INTRODUCTION: The oscillating spindle sander is used to sand the edges of boards. It can be used to smooth the edge or to remove material to

More information

Installation and Assembly: Full Service Video Wall Mount

Installation and Assembly: Full Service Video Wall Mount Installation and Assembly: Full Service Video Wall Mount Model: DS-VW765-LAND Max UL Load Capacity: 125 lb (57 kg) 1 of 12 ISSUED: 05-13-11 SHEET #: 145-9011-5 05-21-12 Note: Read entire instruction sheet

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS For Wallbed models: Do-It-Yourself BOOKLET #C90 WARNING! ALL MURPY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION

More information

Aluminum Lake Truss Dock Instructions

Aluminum Lake Truss Dock Instructions Table of Contents Aluminum Lake Truss Dock Instructions 1. Dock Assembly and Set-Up 1.1 Quick Start 1.2 Positioning Quick Clips 1.3 Installing Dock Legs 1.4 Installing Foot Pads 1.5 Installing Cross Braces

More information

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS 9531-007-Z00-01 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 5 Concrete Surface Installation

More information

MODEL 200/220 ASSEMBLY INSTRUCTIONS

MODEL 200/220 ASSEMBLY INSTRUCTIONS V-Twin MFG. Coats Tire Changer VT Part No. 16-0510 This tool should only be used by a knowledgeable and trained motorcycle technician V-Twin Mfg. accepts no responsibility for improper use. MODEL 200/220

More information

Spring Loaded All Season Roll-Up Doors

Spring Loaded All Season Roll-Up Doors Spring Loaded All Season Roll-Up Doors STAND-OFF MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged, immediately

More information

Power Planer 1900B/N1900B/1902

Power Planer 1900B/N1900B/1902 Power Planer 1900B N1900B 1902 SPECIFICATIONS Model 1900B/N1900B/1902 Planing width... 82 mm Planing depth... 1 mm Shiplapping depth... 9 mm No load speed (min -1 )...16,000 Overall length... 290 mm Net

More information

Interactive Monitor Arm

Interactive Monitor Arm Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods

More information

RULTRACT RETRACTOR CABLE REPLACEMENT INSTRUCTIONS. Rultract, Inc. is the ONLY authorized service center in the U.S.A.

RULTRACT RETRACTOR CABLE REPLACEMENT INSTRUCTIONS. Rultract, Inc. is the ONLY authorized service center in the U.S.A. RULTRACT RETRACTOR CABLE REPLACEMENT INSTRUCTIONS Rultract, Inc. is the ONLY authorized service center in the U.S.A. When your Rultract instrument needs repair or service, contact Rultract Inc. or Rultract

More information

ELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0

ELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 ELECTRIC SLIP ROLL MACHINE Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 Operation Manual Table of contents I MAIN SPECIFICATION...2 II SAFETY INSTRUCTIONS.. 2 III OPERATION INSTRUCTIONS..4

More information

A-dec 6300 Ceiling-Mount Dental Light INSTALLATION GUIDE

A-dec 6300 Ceiling-Mount Dental Light INSTALLATION GUIDE A-dec 6300 Ceiling-Mount Dental Light INSTALLATION GUIDE Recommended Tools Hex key set Plumb bob Drill 3/16" drill bit 6' piece of tubing Level Phillips head screwdriver Tape measure Anti-static strap

More information

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine The purpose of this guide is to: 1. Describe mounting of Counterweight (page 2). 2. Describe

More information

Flat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold

Flat Panel Stand FPZ-655. for 32 to 55 Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination

More information

SG4 Shotgun Shoe Group for 555 Series Electric Benders

SG4 Shotgun Shoe Group for 555 Series Electric Benders INSTRUCTION MANUAL SG4 Shotgun Shoe Group for 555 Series Electric Benders Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register

More information