Woody Bike Rack Assembly

Size: px

Start display at page:

Download "Woody Bike Rack Assembly"

Lora Cummings
6 years ago
Views:

1 WOODY RAD k c a R Bike Assembly Instructions

Thank you for purchasing the Woody Bike Rack from RAD Cycle Products. Because you bought the coolest bike rack on the market, you must have a taste for quality and elegance.

And because we take our quality personally, we back up our products with a Limited 1 Year Warranty.

2 Thank you for purchasing the Woody Bike Rack from RAD Cycle Products. Because you bought the coolest bike rack on the market, you must have a taste for quality and elegance. The Real Wood Woody Bike Rack from Rad Sports combines the utility you need with the charm and quality of real wood. And because we take our quality personally, we back up our products with a Limited 1 Year Warranty. If you experience any issues with this product, need some one-on-one help getting it set up, or are missing any parts, do not hesitate to call us at Woody Bike Rack Parts List A I F B E G A) 18 Hook & Loop Fasteners (2) B) Top Plate (1) C) 6 Top Support (1) D) Extension Slider (2) E) 4 Spacers (4) F) Hex Wrenches (2) G) Cap Nuts (12) H) Foam Pads (4) I) Wood Screw (1) J) Adjustable Feet (2) K) Threaded Rods (4L, 2SM) L) Hexhead Screws (8) M) RH Arm (2) N) Main Frame (3) O) LH Arm (2) P) 8 Bottom Supports w/threaded inserts (2) Q) Bottom Plate O B H C D M N E J H L P K J Q (2)

3 Woody Bike Rack Assembly NOTE: It is recommended that you plan for installing your Woody Bike Rack directly below a ceiling joist or ceiling damage may occur. There is also a risk of the bike rack of coming loose and falling causing possible damage or injury. If you do not know how to locate a ceiling joist consult a professional before proceeding. 1) Attach the 4 Foam Pads (H) to the Top Plate (B). Then using one short Wood Screw (I), Attach the Top Plate (B) to the 6 Top Support (C). Figure 1 2) Using 2 short Threaded Rods (K) and 4 Cap Nuts (G), sandwich the Top Support (C) between the two Extension Sliders (D) and tighten with the 2 included Hex Wrenches (F). Figure 1 NOTE: It may be easier to start the Cap Nuts onto one side of the Threaded Rods first before assembling. Figure 1 NOTE: The Top Supports are different from one end to the other. The ends will be flush with the Top Plate when properly assembled. Figure 2 3) Thread the 2 Adjustable Feet (J) into the threaded inserts of the bottom supports (P) leaving approximately 1/2 of thread showing. Figure 2 4) Using 2 Long Threaded Rods (K) and 4 Cap Nuts (G), sandwich the 2 bottom supports/feet assemblies between the 3 Main Frame pieces (N). The Main Frame pieces (N) are the longest pieces in the kit. Tighten the Cap Nuts (G) with the included Hex Wrenches (F). Figure 2??? NOTE: The Main Frames are different from one end to the other. The ends will be flush with the bottom supports when properly assembled. 5) Measure the height of your ceiling from the floor where your Woody Bike Rack will be installed. Figure 3 Figure 3 (3)

4 Woody Bike Rack Assembly ~ Cont. 6) Insert the Extension Slider and Top Plate assembly into the Main Frame assembly, adjusting the overall length from the top of the Top Plate to the bottom of the Adjustable Feet to within 1 of the height measured in Step 5. See Figure 4 Figure 4 Figure 5 7) Secure the Extension Slider (D) to the Main Frame (N) using the 2 remaining long Threaded Rods (K) and the 4 remaining Cap Nuts (G), ensuring that one is placed at the very end of the Main Frame near the top, and the other near the bottom where the Extension Slider ends. Having the Threaded Rods as far apart as possible will provide the most stable mounting configuration possible. Tighten the Cap Nuts using the appropriate provided Hex Wrench (E). 8) Caution: You may wish to seek help in standing the unit up and securing it in place. Find the location where you are going to secure your Woody Bike Rack. With the Adjustable feed downward, stand the entire assembly on the Bottom Plate (Q). With the top of the stand in place, use an 8mm wrench (not included) to adjust the feet downward until the stand is secure between the floor and the ceiling. (4) Figure 6

5 Woody Bike Rack Assembly ~ Cont. Figure 7 9) You have two sets of arms, 2 Right (M) and 2 Left (O) to hold 2 bikes. Determine the desired heights for each bike. Where the top of the frame of each bike meets the assembly put a RH Arm (M) and LH Arm (O) and secure to the assembly with 2 Hexhead Screws (L) for each arm. If one set of arms is in the area where the Extension Slider is NOT, use two 4 Spacers (E) to strengthen the assembly. Tighten screws with a Hex Wrench (F). See Figure 7 NOTE: It may be necessary to force the holes in the arms together just a bit so that the holes in the arms match up with the holes in the Main Frame, especially where the 4 Inch Spaces are to be located (Figure 8). Figure 8 10) Included for your convenience are two Hook & Loop Fasteners (A). Use these to secure the front wheel by wrapping the fasteners though the front wheel and around the frame. Remove before riding the bicycle. See Figure 9 NOTE: Before every use ensure that the rack is still secure or in need of adjustment. (5) Figure 9

6 Woody Bike Rack Safety Precautions WARNING. Do not climb, step or hang anything off the Woody Bike Rack other than intended by the manufacturer. Do NOT allow small children to play on or around the Woody Bike Rack. Keep pets away from the bike rack. Serious injury could occur due to misuse or improper installation of this unit. Please follow all instructions, and regularly check installation to ensure safe use. DTX International (Rad Cycle Products) will not be held liable for any injury or damage caused by improper installation or misuse. If you find any pieces broken or missing, stop assembly and contact our Customer Service number right away so that we may correct any issues that may make your installation unsafe or incomplete. Again we thank you for your purchase of your RAD Woody Bike Rack. Please visit RadCycleProducts.com for a complete line of Bicycle trainers, stand, bike racks and more. If you have any issues with your Woody Bike Rack, do not hesitate to call us at (800) (6)

Assembly Instructions for model: VMPR1

Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design