Veneer Sheet Stock and Panel Descriptions

Transcription

1 Descriptions Let WalzCraft be your Single Source Provider! and Panel Descriptions All ⅛" and panels have an A grade veneer on the face. All veneers are book matched on the face side, with the exception of Hickory, all Rustic and Knotty Grades. Wood with Phenolic Back (Non Adhesive)..... Wood with a backing material similar to plastic laminate suitable for use Lb/Sq. Ft =.194 with contact adhesive. Wood With Wood Back (Non Adhesive) Ply sheet stock that provides the look of solid wood with a back suitable Lb/Sq. Ft =.123 for use with contact adhesive. Wood with Paper Back (Non Adhesive) Wood with a paper back ing suitable for use with contact adhesive Lb/Sq. Ft =.106 Wood with Paper Back (A) Wood with a paper back plus 3M Peel and Stick adhesive. Lb/Sq. Ft =.148 Wood with Wood Back (A) Ply sheet stock that provides the look of solid wood plus 3M Peel and Lb/Sq. Ft =.177 Stick adhesive. ⅛" Sheet A Face grade wood veneer, 3 ply veneer core with a #4 back. Lb/Sq. Ft =.460 ⅛" Sheet Core A Face grade wood veneer, core with a #4 back. Lb/Sq. Ft =.739 Sheet Core A Face grade wood veneer, core with a #1 back. Lb/Sq. Ft =.934 Sheet Core A Face grade wood veneer, core with a #4 back. Lb/Sq. Ft =.934 Sheet A or B Face grade wood veneer, veneer core with various grade backs. Lb/Sq. Ft =.448 ½" Core A Face grade wood veneer, core with a #1 back. Lb/Sq. Ft = ½" A Face grade wood veneer, veneer core with a #1 back. Lb/Sq. Ft = ⅝" Core A Face grade wood veneer, core with a #1 back. Lb/Sq. Ft = ⅝" A Face grade wood veneer, veneer core with a #1 back. Lb/Sq. Ft = Core AA, A or B Face grade wood veneer, core with a #1 back. Lb/Sq. Ft = A Face grade wood veneer, veneer core with a #1 back. Lb/Sq. Ft = Combi-Core Custom Pressed Option only. Lb/Sq. Ft = Rotary Cut The log is turned against a razor sharp blade, like unwinding a roll of paper. Produces a wide veneer with a bold variegated pattern. Plain Sliced ½ of a log is held heart side against the table. Slicing is done parallel to the center line of the log. Produces cathedral grain. Slicing is done across the growth rings to produce a straight grain look. Sometimes flake is present in oak due to the Medullary ray cells. Rift Cut Slicing is done at a 15 degree angle across the growth rings to produce a straight grain look without flake.

2 99.9% American Made SS = Rough Cut to Stock Sizes (Only) RTRW = Rip to Rough Width Cut and Ripped Descriptions A sheet that is only available in the following sizes: : 4'x8', 2'x8', 4'x4', 2'x4', 24"x32". ⅛",, ⅜", ½", ⅝", 11 /16",, ⅞", 1" Panels: 4'x8', 2'x8', 4'x4', 2'x4', 24"x36", 24"x32". 11.7mm, 15.2mm and 18.0mm Panels: 60"x60". Edges may need to be trimmed. Some sheets may be slightly oversized. See the chart below for the actual size of our materials. Allow ⅛" per saw kerf. Available in customer specified widths x 8' long only (60" long for 11.7mm, 15.2mm and 18.0mm thick panels). Edges may need to be trimmed. Specified widths will not be oversized. Some lengths may be slightly oversized. See the chart below for the actual size of our materials. Allow ⅛" per saw kerf. There is a ½ square foot minimum per item for pricing. Available in customer specified widths and lengths (any size piece that the sheet will yield). No trimming of edges is needed. Pieces will not be oversized. See the chart below for the actual size of our materials. Allow ⅛" per saw kerf. There is a ½ square foot minimum per item for pricing. Class Description Actual Size of 2'x8' sheets are cut from 4'x8' sheets. Phenolic Back 48½" x 96½" We split the sheet equally in two halves Non Adhesive Wood Back 48½" x 96⅜" to produce two slightly oversize 2x8 s. * Pressure Sensitive Adhesive (A) 1) Finishing 2) Application Instructions 3) 4' x 8' Panels 4) 5) 6) 7) Birch, Hard & Soft Maple and Pine s Refacing with SolidTone and SolidTone WoodGrain Colors Architectural Grade s Cutting Prefinished s Paper Back 49" x 97" Paper Back 49" x 97" * A will cover the entire length of the sheet, Wood Back 48½" x 96⅜" but may not extend to the edges in width. ⅛" 48½" x 96½" ⅛" Core 96½" x 48½" (Not used for oversized 2'x8', 4'x4' and 2'x4' panels.) Core 48½" x 96½" Core A4 48½" x 96½" 48½" x 96½" ½" Core 48½" x 96½" ½" 48½" x 96½" ⅝" Core 48½" x 96½" ⅝" 48½" x 96½" Core 48½" x 96½" 48½" x 96½" & Panel Notes Smoothing Blade Charge per Smoothing Blade. Smoothing Blade Notes 4'x4' sheets are cut from 4'x8' sheets. We split the sheet equally in 2 halves to produce two slightly oversize 4x4 s. (This is only available with material.) 2'x4' sheets are cut from 4'x8' sheets. We split the sheet equally in 2 halves in both width and height to produce four slightly oversize 2x4 s. (This is only available with material.) If you are ordering 2'x4', 4'x4', 2'x8' or 4'x8' sheets, you will be charged for that square footage but will receive slightly oversized panels. For and ⅛" &, use the square foot prices for product finished on one side. These prices are for finishing the face of the panel only (1S pricing). For ½", ⅝" &, use the square foot prices for finishing on two sides. These prices are for finishing the face and back of the panel only (2S pricing). Manufacturer s guidelines for suggested application will be provided with each order. WalzCraft and its suppliers will warranty product, provided the material was properly installed. 4'x8' panels are considered 95% free from defect. If you require panels to be 100% free, please order Precision Cut to Size (PCTS). All materials originate from a 4'x8' sheet. Cut to size includes cuts to both the width and height. Rip to Rough Width (RTRW) would be 95% free from defect, not 100% free, as both dimensions are not being cut to size. To minimize any color mismatch between veneer refacing materials and solid wood products for these wood species, WalzCraft recommends using a Spray No Wipe stain process on the entire job, for a blotch free finish. The only veneer options available for refacing with SolidTone and SolidTone WoodGrain colors are: Phenolic Back, ⅛" ply and ply. See Architectural Grade / Reconstituted s section of catalog for more information. When cutting prefinished wood veneers, WalzCraft recommends the use of some type of veneer saw, razor knife or trim router to produce a clean cut. We do not recommend the use of a laminate slitter on prefinished wood veneers as this can sometimes leave a jagged edge. When choosing to use a laminate slitter, it is recommended that you cut the piece oversized, secure in place and then rout flush to produce a smooth, clean edge. Beveled plexiglas blade never scratches. 1) Product Features Handle is constructed of northern unfinished hard maple. 2) Ordering When ordering, use Part # For flawless results, we recommend that you use a Smoothing Blade versus a J-roller 3) Recommendations when applying pressure sensitive veneer. A J-roller will not apply enough pressure to achieve an intimate bond. Application This product is listed in the application instructions sent by WalzCraft. You can also access this 4) Instructions information on our website under Industry Tools.

3 SS = Rough Cut to Stock Sizes (Only) - 4x8, 2x8, 4x4, 2x4, 24x32 ⅛" - 4x8, 2x8, 4x4, 2x4, 24x36, 24x32 Non-Adhesive Phenolic Back.038" [1.0mm] Wood Back.036" [0.9mm] Paper Back.023" [0.6mm] = Plain Sliced = Rotary Cut Pressure Sensitive (3M A) Peel & Stick Paper Back.023" [0.6mm] Wood Back.036" [0.9mm] ⅛", A4.156" [4.0mm] ⅛" Core, A4.165" [4.2mm] +/-.010" Size SS SS SS SS SS SS RTRW PCTS SS RTRW PCTS ⅛" Core, A4.165" [4.2mm] +/-.010" (8'x4') 8x4 Only PCTS SS AFRORMOSIA ALDER ANIGRE Medium Figure Brown - White - BEECH European Steamed - Baltic - Mill Grade BIH Red - Red - White - BUTTERNUT No Sap - Ultra CHESTNUT Australian CYPRESS ELM Red - Mill Grade FIR Douglas - Reconstituted HEMLOCK Brown - Calico - Ultra White - JATOBA Brazilian Cherry - Mill Grade LYPTUS Khaya (Matches Genuine Plantaion) - Khaya (Matches Sipo)- Khaya (Matches Sipo)- Hard - Birds Eye - Hard - Curly - Hard - Hard - Hard - Soft - Soft - Raw Red - Ultra Red - Red - Red - Rift Sawn () White - White - White - Rift Sawn () Knotty Grade PINE White Northern - Green - White - SAPELE No Sap - Architectural Grade s Please see Architectural Grade s section of catalog for more information. All Other Wood Species Please call for quote and availability.

4 SS = Rough Cut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x36, 24x32 Core.220" [5.6mm] +/-.005" Size SS RTRW PCTS Core A4.220" [5.6mm] +/-.005" (8'x4') = Plain Sliced = Rotary Cut Core A4.220" [5.6mm] +/-.005" Drawer Box Bottom A or B Face.250" [6.4mm] +0"/ " Various Grade Backs.250" [6.4mm] +/-.015" ⅜".375" [9.5mm] +/-.015" 8x4 Only PCTS SS RTRW PCTS SS RTRW PCTS TS RTRW PCTS SS RTRW PCTS SS AFRORMOSIA ALDER ANIGRE Medium Figure Brown - White - BEECH European Steamed - Baltic - Mill Grade BIH Red - Red - White - BUTTERNUT No Sap - Ultra CHESTNUT Australian CYPRESS ELM Red - Mill Grade FIR Douglas - Reconstituted HEMLOCK Brown - Calico - Ultra White - JATOBA Brazilian Cherry - Mill Grade LYPTUS Khaya (Matches Genuine Plantaion) - Khaya (Matches Sipo)- Khaya (Matches Sipo)- Hard - Birds Eye - Hard - Curly - Hard - Hard - Hard - Soft - Soft - Raw Red - Ultra Red - Red - Red - Rift Sawn () White - White - White - Rift Sawn () Knotty Grade PINE White Northern - Green - White - SAPELE All Other Wood Please call for quote and availability. No Sap - Species

5 SS = Rough Cut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x36, 24x32 Size ½" Core.500" [12.7mm] +0"/-.015" ½".500" [12.7mm] ½".500" [12.7mm] +/-.015" = Plain Sliced = Rotary Cut 11.7mm / (60"x60") ⅝" Core.625" [15.9mm] +0"/-.015" ⅝".625" [15.9mm] ⅝".625" [15.9mm] +/-.015" 15.2mm.598" (60"x60") SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS AFRORMOSIA ALDER ANIGRE Medium Figure Brown - White - BEECH European Steamed - Baltic - Mill Grade BIH Red - Red - White - BUTTERNUT No Sap - Ultra CHESTNUT Australian CYPRESS ELM Red - Mill Grade FIR Douglas - Reconstituted HEMLOCK Brown - Calico - Ultra White - JATOBA Brazilian Cherry - Mill Grade LYPTUS Khaya (Matches Genuine Plantaion) - Khaya (Matches Sipo)- Khaya (Matches Sipo)- Hard - Birds Eye - Hard - Curly - Hard - Hard - Hard - Soft - Soft - Raw Red - Ultra Red - Red - Red - Rift Sawn () White - White - PINE SAPELE White - Rift Sawn () White Northern - Green - White - No Sap - All Other Wood Species Knotty Grade Please call for quote and availability.

6 SS = Rough Cut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x36, 24x32 Size ¹¹/16".687" [17.4mm] +/-.015" 18.0mm / (60"x60") Core AA Face +0"/-.015" Door Grade = Plain Sliced = Rotary Cut Core A or B Face +0"/-.015" #1 Grade Back +/-.015" ⅞" Solid A Face/Back.865" [22.0mm] +/-.015 Bamboo Only 1" 1.00" [25.4mm] +/-.015" SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS AFRORMOSIA ALDER ANIGRE Medium Figure Brown - White - BEECH European Steamed - Baltic - Mill Grade BIH Red - Red - White - BUTTERNUT No Sap - Ultra CHESTNUT Australian CYPRESS ELM Red - Mill Grade FIR Douglas - Reconstituted HEMLOCK Brown - Calico - Ultra White - JATOBA Brazilian Cherry - Mill Grade LYPTUS Khaya (Matches Genuine Plantaion) - Khaya (Matches Sipo)- Khaya (Matches Sipo)- Hard - Birds Eye - Hard - Curly - Hard - Hard - Hard - Soft - Soft - Raw Red - Ultra Red - Red - Red - Rift Sawn () White - White - White - Rift Sawn () Knotty Grade PINE White Northern - Green - White - SAPELE No Sap - All Other Wood Species Please call for quote and availability.

7 Melamine Melamine Melamine ½" Melamine ⅝" Melamine Melamine Size SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS SS RTRW PCTS White Melamine 2 Sides, Particle Board Core Almond Melamine 2 Sides, Particle Board Core Maple Melamine 2 Sides, Particle Board Core White Melamine 2 Sides, Particle Board Core-NAUF Almond Melamine 2 Sides, Particle Board Core-NAUF Maple Melamine 2 Sides, Particle Board Core-NAUF Melamine Notes 99.9% American Made 1) 4 x 8 Sheet Sizes Actual sheet size is 49" x 97". 2) SS - Rough Cut Stock Size A sheet that is only available in the following sizes: 4'x8', 2'x8', 4'x4', 2'x4'. Edges may need to be trimmed. Some sheets may be slightly oversized. Allow ⅛" per saw kerf. 3) RTRW - Ripped to Rough Width Available in customer specified widths x 8' long only. Edges may need to be trimmed. Specified widths will not be oversized. Some lengths may be slightly oversized. Allow ⅛" per saw kerf. There is a ½ square foot minimum per item for pricing. 4) PCTS - Precision Cut to Size Available in customer specified widths and lengths (any size piece that the sheet will yield). No trimming of edges is needed. Pieces will not be oversized. Allow ⅛" per saw kerf. There is a ½ square foot minimum per item for pricing. 5) NAUF No Added Urea Formaldehyde. Custom Pressed Pricing Per Square Foot Core ⅜" Core ½" Core ⅝" Core /16" Combi-Core /16" Core Core 1" Core 4x8 4x8 4x8 4x8 4x8 4x8 4x8 4x8.3350".4600".5850".7100".7725".7725".8500" 1.100" ness of Finished Panels includes Face, Core and Back. Tolerance is + / -.015". Pressing Charge (Includes both sides) Pricing Example: ⅝" Core, Unfinished, Cherry-Select/Premium- Face, Oak-Red-Natural/Standard- Back : ⅝" x 4'x8' $ Cost per Sq. Ft. 4'x8' Select/Premium Cherry $ Cost per Sq. Ft. 4'x8' Natural/Standard Red Oak $ Cost per Sq. Ft. Pressing Charge $ Cost per Sq. Ft. Pricing Per Square Foot Total..... $ Total per Sq. Ft. Charge x 32 square feet Price Per 4'x8' Sheet $ Total Cost Plus Expedite Upcharge, if applicable. Plus Packaging Fees. Custom Pressed Stock Notes 1) Pressing Custom pressed In-House. 2) Core ness Options, ⅜", ½", ⅝", 11 /16", and 1". 3) Availability Only available in 4' x 8' sheets, shipped 1" oversized to allow for misalignment during lamination and to minimize loss if edges are damaged in transit. 4) Face & Back s Select any one or different Non-Adhesive Woodback s for the face and back. 5) Finishing Finishing is available. 6) Combi-Core Combi-core has veneer core inner plies with particleboard (PBC) or crossbands. This material offers similar strength and stability to veneer core but has the void-free surface quality of PBC or.