Veneer Sheet Stock & Panel Descriptions. Wood Veneer with a wood back suitable for use with contact adhesive.
|
|
- Christal Heath
- 6 years ago
- Views:
Transcription
1 Sheet Stock Options s, & Wood with Resin Back (Non Adhesive) Lb/Sq.Ft. =.194 Wood With Wood Back (Non Adhesive) Lb/Sq.Ft. =.123 Wood with Paper Back (Non Adhesive) Lb/Sq.Ft. =.106 Wood with Wood Back (A - Peel & Stick) Lb/Sq.Ft. =.177 Wood with Paper Back (A - Peel & Stick) Lb/Sq.Ft. =.148 Sheet ore Lb/Sq.Ft. =.460 Sheet ore Lb/Sq.Ft. =.739 Sheet ore Lb/Sq.Ft. =.934 Sheet ore Lb/Sq.Ft. =.934 Sheet ore Lb/Sq.Ft. =.448 ½" ore Lb/Sq.Ft. = ½" ore Lb/Sq.Ft. = ⅝" ore Lb/Sq.Ft. = ⅝" ore Lb/Sq.Ft. = /16" ombi-ore Lb/Sq.Ft. = Sheet Stock & Panel Descriptions Sheet Stock Wood veneer with a resin soaked backer sheet that has been permanently bonded under heat and pressure. This provides the sheet with dimensional stability, strength and flexibility and acts as a barrier to prevent adhesives and finishes from penetrating. an be used with a solvent based or water based contact adhesive. Resin backed veneers are also sometimes referred to as DuraBack, PolyBak, or PolyLam. Wood with a wood back suitable for use with contact adhesive. Wood with a paper back suitable for use with contact adhesive. 2 Ply sheet stock that provides the look of solid wood plus 3M Peel and Stick adhesive. Wood with a paper back plus 3M Peel and Stick adhesive. Sheet Stock A Face grade wood veneer, 3 ply veneer core with a #4 back. The #4 back may be a different wood species than the A face. A Face grade wood veneer, core with a #4 back. The #4 back may be a different wood species than the A face. Sheet Stock A Face grade wood veneer, core with a #1 back. A Face grade wood veneer, core with a #4 back. The #4 back may be a different wood species than the A face. A or B Face grade wood veneer, veneer core with various grade backs. ½" Sheet Stock A Face grade wood veneer, core with a #1 back. A Face grade wood veneer, veneer core with a #1 back. ⅝" Sheet Stock A Face grade wood veneer, core with a #1 back. A Face grade wood veneer, veneer core with a #1 back. 11 /16" ombi-ore ombi-core has veneer core inner plies with crossbands. This material offers similar strength and stability to veneer core but has the void-free surface quality of. Also available in ustom Pressed Options, see Section.4. Sheet Stock ore Lb/Sq.Ft. = AA, A or B Face grade wood veneer, core with a #1 back. ore Lb/Sq.Ft. = A Face grade wood veneer, veneer core with a #1 back. Note: All veneers are book matched on the face side, with the exception of Hickory, all Rustic and notty Grades..1.2 For PRIING See Section.1 in our Wholesale Pricing atalog. (Phone) :00AM - 4:30PM ST (24 Hour Fax)
2 s, & Sheet Stock Options Slicing Methods Rotary ut Plain Sliced Rift ut The log is turned against a razor sharp blade, like unwinding a roll paper. This cut produces a wide veneer with a bold variegated pattern. ½ of a log is held heart side against the table. Slicing is done parallel to the center line of the log. This cut produces cathe dral grain. Slicing is done across the growth rings to produce a straight grain look. Sometimes flake is present in oak due to the Medullary ray cells. Slicing is done at a 15 angle across the growth rings to produce a straight grain look without flake. nife Book Match Book Match: The most common matching type. Alternating leaves are turned over, so that adjacent leaves are opened like the pages of a book. Visual Effect: joints match, creating a symmetrical pattern. Yields maximum continuity of grain. Prominent characteristics ascend or descend across the face. *Walzraft offers all veneers as being Book Matched. For PRIING See Section.1 in our Wholesale Pricing atalog. 99.7% American Made.1.3
3 Sheet Stock Options s, & SS = Rough ut to Stock Sizes (Only) RTRW = Rip to Rough Width PTS = Precision ut to Size ut and Ripped Descriptions A sheet that is only available in the following sizes: : 4'x8', 2'x8', 4'x4', 2'x4', 24"x32"., 7 /32",, ⅜", ½", ⅝", 11 /16",, 1" Panels: 4'x8', 2'x8', 4'x4', 2'x4', 24"x32". HDF, ⅞" Panels: 60"x96", 30"x96", 60"x48", 30"x48". 7 /32" Raw : 60"x108", 30"x108", 60"x54", 30"x54". 12.0mm, 15.2mm and 18.0mm Panels: 60"x60". Edges may need to be trimmed. Some sheets may be slightly oversized. See the chart below for the actual size of our Sheet Stock materials. Allow per saw kerf. Available in customer specified widths x 8' long only (60" long for 12.0mm, 15.2mm & 18.0mm thick panels). Edges may need to be trimmed. Specified widths will not be oversized. Some lengths may be slightly oversized. See the chart below for the actual size of our Sheet Stock materials. Allow per saw kerf. Available in customer specified widths and lengths (any size piece that the sheet will yield). PTS items will be square and the exact size ordered. Pieces will not be oversized. Edges will be a sawn edge, not a routed edge, and as such could have visible saw kerfs. Precision ut to Size sheet stock is 100% free from defect on the face of the part. Finished sizes include cuts to both the width and the height. See the chart below for the actual size of our Sheet Stock materials. Allow per saw kerf. Actual Size of Sheet Stock lass Description Actual Size of Sheet 2'x8' sheets are cut from 4'x8' Resin Back 48½" x 96½" sheets. We split the sheet Non Adhesive Wood Back 48½" x 96⅜" equally in two halves to produce two slightly oversized Paper Back 49" x 97" 2x8 s. * Pressure Sensitive Adhesive (A), Raw HDF Wood Back 48½" x 96⅜" * A (Peel & Stick) will cover the entire Paper Back 49" x 97" length of the sheet, but may not extend to the edges in width. ore 48½" x 96½" ore A4 96½" x 48½" ( Not used for oversized 2'x8', 4'x4' and 2'x4' panels.) ore A1 48½" x 96½" ore A4 48½" x 96½" ore 48½" x 96½" ½" ore A1 48½" x 96½" ½" ore 48½" x 96½" ⅝" ore A1 48½" x 96½" ⅝" ore 48½" x 96½" ore A1 48½" x 96½" ore 48½" x 96½" 7 /32 ",, ⅜", ½", ⅝" 11 /16",, 1" 49" x 97" 4'x4' sheets are cut from 4'x8' sheets. We split the sheet equally in 2 halves to produce two slightly oversized 4x4 s. (This is only available with material and veneer.) 2'x4' sheets are cut from 4'x8' sheets. We split the sheet equally in 2 halves in both width and height to produce four slightly oversized 2x4 s. (This is only available with material & veneer.) If you are ordering 2'x4', 4'x4', 2'x8' or 4'x8' sheets, you will be charged for that square footage but will receive slightly oversized panels. ⅞" 61" x 97" The same rules apply as 7 /32" 61" x 109" above when cutting the High Density 5'x8' or 5'x9' panels in halves or 61" x 97" Fiberboard quarters..1.4 For PRIING See Section.1 in our Wholesale Pricing atalog. (Phone) :00AM - 4:30PM ST (24 Hour Fax)
4 s, & Sheet Stock Options (Standard) One-Sided (1S) Finish - Sheet Stock Products Non-Adhesive Resin Back.037" [0.9mm] +.008"/-.007" ore, A1.220" [5.6mm] +/-.005" Non-Adhesive Wood Back.036" [0.9mm] ore, A4.220" [5.6mm] +/-.005" (8'x4') Non-Adhesive Paper Back.023" [0.6mm] A Paper Back.023" [0.6mm] ore, A4.220" [5.6mm] +/-.005" Drawer Box Bottom See Finish Options notes within this section for more information. A Wood Back.036" [0.9mm] ore A or B Face.198" [5.0mm] +/-.012" Various Grade Backs ore, A4.156" [4.0mm] 7 /32".219" [5.6mm] +/-.015" ore, A4.165" [4.2mm] +/-.010" ore, A4.165" [4.2mm] +/-.010" (8'x4') MEDEX.250" [6.4mm] +/-.015" HDF.125" [3.2mm] +/-.015" (5'x8') ⅜".375" [9.5mm] +/-.015" ½" ore, A1.500" [12.7mm] +0"/-.015" ¹¹/16" ombi-ore.687" [17.4mm] ½" ore, A1.500" [12.7mm] +0"/ " ¹¹/16".687" [17.4mm] (Standard) Two-Sided (2S) Finish - Sheet Stock Products ½".500" [12.7mm] +/-.015" 18.0mm ore.709" +.03"/-.04" ore AA Face +0"/-.015" Door Grade See Finish Options notes within this section for more information. 12.0mm ore.4724" +.02"/-.03" ore A or B Face +0"/-.015" #1 Grade Back ⅝" ore, A1.625" [15.9mm] +0"/-.015" ore, A1 ⅝" ore, A1.625" [15.9mm] ⅝".625" [15.9mm] +/-.015" ⅞".875" [22.2mm] 15.2mm ore.598" +.02"/-.03" 1" 1.00" [25.4mm] For PRIING See Section.1 in our Wholesale Pricing atalog. 99.7% American Made.1.5
5 Sheet Stock Options s, & Ordering & Pricing Notes:, & Ordering Guidelines 1 Order Forms Please use Sheet Goods Order Forms (E Z Forms #8, #8.2) and part #185. Pricing 1 Pricing Please see Section.1 of the Wholesale Pricing atalog. 1 Refacing with SolidTone Finish/olor 2 1 Refacing with SolidTone WoodGrain Finish/olor 1 Shipping 1 One Sided (1S) Finishing 2 Two-Sided (2S) Finishing utting Prefinished s 2 Application Instructions Technical Notes:, & abinet Refacing Options (hapter U) Sheet Stock options available for refacing with SolidTone Finish/olor: Non-Adhesive Resin Back and A (Peel & Stick) Wood Back HDF and, 7 /32" & & ( ore and ore) Note: When applying a SolidTone Finish/olor to A (Peel & Stick) Wood Back, the only SS that are available will be 2' x 8' [609.6mm x mm], 2' x 4' [609.6mm x mm] and 24" x 32" [609.6mm x 812.8mm]. Sheet Stock options available for refacing with SolidTone WoodGrain Finish/olor: Non-Adhesive Resin Back & A (Peel & Stick) Wood Back and ( ore and ore) Note: When applying a SolidTone WoodGrain Finish/olor to A (Peel & Stick) Wood Back, the only SS that are available will be 2' x 8' [609.6mm x mm], 2' x 4' [609.6mm x mm] and 24" x 32" [609.6mm x 812.8mm]. General Information (hapter A) PM18 (U-hannel Box) will be Walzraft's preferred method of packaging sheet stock thick or greater, unless otherwise specified. Finish Options (hapter R) and, 7 /32", & ⅜", HDF and are only finished on the face of the panel (1S). Minimal over spray onto the edges and back of product will be considered acceptable. ½", ⅝", 11 /16",, ⅞" and 1" & is finished on the face and back of the panel only (2S). Minimal over spray onto the edges of the product will be considered acceptable. A 2S finish for these products is recommended and is Walzraft s standard method as it helps to balance the product and minimize warpage. With thicker material it is more difficult to correct warpage during installation or a product's ability to lay flat when it is not properly balanced. You may choose a 1S finish for these products, but minimal over spray onto the edges and back will be considered acceptable and there will be no warranty against warpage. If over spray is not acceptable, Walzraft can mask the edges and back during the finishing process, but additional charges will apply. If a 1S finish is desired for these products, please indicate this, and whether or not over spray is acceptable, in the Special Instructions section of the order form. Miscellaneous When cutting prefinished wood veneers, Walzraft recommends the use of some type of veneer saw, razor knife or trim router to produce a clean cut. We do not recommend the use of a laminate slitter on pre-finished wood veneers as this can sometimes leave a jagged edge. When choosing to use a laminate slitter, it is recommended that you cut the piece oversized, secure in place and then rout flush to produce a smooth, clean edge. Manufacturer s guidelines for suggested application will be provided with each order. Walzraft and its suppliers will warranty product, provided the material was properly installed. Sheet Stock Options (hapter ) 1 Edgebanding Please see Section L.1 - Basic abinet Box omponents for edgebanding sheet stock parts. Notes ontinued on Next Page For PRIING See Section.1 in our Wholesale Pricing atalog. (Phone) :00AM - 4:30PM ST (24 Hour Fax)
6 s, & Sheet Stock Options 1 4' x 8' Panels 2 8' x 4' Panels 1 Birch, herry, Pine, Hard & Soft Maple 2 Whole Piece Face (WPF) 3 Hickory - - Rustic Grade with a DBPB Technical Notes:, &...continued Sizes / Dimensions 4'x8' panels are considered 95% free from defect on the face of the product. If you require panels to be 100% free from defect on the face, please order Precision ut to Size (PTS). All materials originate from a 4'x8' sheet. ut to Size includes cuts to both the width and height. PTS items will be square and the exact size ordered. Pieces will not be oversized. Edges will be a sawn edge, not a routed edge, and as such could have visible saw kerfs. Rip to Rough Width (RTRW) and Rough ut to Stock Sizes (SS) would be 95% free from defect on the face, not 100% free. Both dimensions are not being cut to size. When Precision ut to Size (PTS) pieces of or, ore, A4 are ordered from 8' x 4' panels, widths must be over 48". Please order from a standard 4' x 8' sheet when widths are under 48". Wood Specie Options (hapter S) To minimize any color mismatch between veneer refacing materials and solid wood products for these wood species, Walzraft recommends using a Spray No Wipe stain process on the entire job, for a blotch free finish. Whole piece faces are made from veneer that has been rotary cut. A whole piece face veneer will not contain any splices. For some time Walzraft has been asked by customers to supply a more Rustic looking Hickory--Rustic veneer. Walzraft has always found this request difficult to fulfill in Hickory because during the veneer slicing process some knots are loosened and either completely or partially fall out. Recently, Walzraft became aware of a product that improves the appearance of sheets with missing knots. It does this by using a Dark Brown Paper Back (DBPB) on the veneer. Walzraft now offers Hickory--Rustic in Paperback Non-Adhesive, and in Paperback A (Pressure Sensitive Adhesive) using the Dark Brown Paper Backing (DBPB). This backing color is close to the color of the knots that one normally finds in Rustic Hickory, and helps to make any portion of a knot that is missing appear to be approximately the same color as the remaining knot. When ordering Hickory--Rustic in Paperback Non-Adhesive, and in Paperback A (Pressure Sensitive Adhesive), please note that it is considered normal to find knots of any size up to 1½" in diameter that may be completely missing, or partially missing. Many users consider this acceptable as the dark backer tends to still give the impression of a knot. Some users may consider the smaller missing knots acceptable, but will not use the portions of the sheet with larger knots. Some users will not find any missing knot acceptable; this material would be a poor choice for those customers. For PRIING See Section.1 in our Wholesale Pricing atalog. 99.7% American Made.1.7
7 Sheet Stock Options s, & HDF High Density Fiberboard Pressure Sensitive (3M A) Peel & Stick Non-Adhesive HDF.125" [3.2mm] (5'x8') ore, A4.165" [4.2mm] +/-.010" (8'x4') ore, A4.165" [4.2mm] +/-.010" ore, A4.156" [4.0mm] Wood Back.036" [0.9mm] Paper Back.023" [0.6mm] Paper Back.023" [0.6mm] Wood Back.036" [0.9mm] Resin Back.037" [0.9mm] +.008"/-.007" 8x4 Only SS Part #185 Availability harts SS = Rough ut to Stock Sizes (Only) - 4x8, 2x8, 4x4, 2x4, 24x32 HDF: 60x96, 30x96,60x48, 30x48-4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) SS SS RTRW PTS SS SS SS SS RTRW PTS SS RTRW PTS PTS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X X X X X X X X X X X X X X X X X ALDER X X X X X X X X ANIGRE-MEDIUM FIGURE Mill Grade X X X Brown - X X X X X X X X X X X X ASH White - X X X Blond Flat Grain X X X BAMBOO Vertical Grain X X X aramelized Flat Grain X X X Vertical Grain X X X BEEH-EUROPEAN Steamed - X X X X X X Baltic - Mill Grade alico / Mixed - X X X X X X X X X X X X X X X - WPF X X X X X X X X X X X X X X X Red - BIH Red - White - X X X X X X X X X X X X X X X White - - WPF X X X X X X X X X BUTTERNUT No Sap - X X X X X X X X X X X X X X X Gummy Grade X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X HERRY Ultra X X X No Sap (Straight Grain) X X X YPRESS X X X ELM-RED Mill Grade Eucalyptus-Red Grandis X X X FIR-DOUGLAS Rift Sawn (Straight Grain) Reconstituted X X X HDF Raw Paint Grade X X X X X X X X X Brown - alico / Mixed - X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X** X** X X X HIORY Ultra White - X X X X X X JATOBA Mill Grade X X X ** = See Wood Species Options note on previous page..1.8 (Phone) :00AM - 4:30PM ST (24 Hour Fax)
8 s, & Sheet Stock Options HDF High Density Fiberboard Pressure Sensitive (3M A) Peel & Stick Non-Adhesive HDF.125" [3.2mm] (5'x8') ore, A4.165" [4.2mm] +/-.010" (8'x4') ore, A4.165" [4.2mm] +/-.010" ore, A4.156" [4.0mm] Wood Back.036" [0.9mm] Paper Back.023" [0.6mm] Paper Back.023" [0.6mm] Wood Back.036" [0.9mm] Resin Back.037" [0.9mm] +.008"/-.007" Part #185 Availability harts SS = Rough ut to Stock Sizes (Only) - 4x8, 2x8, 4x4, 2x4, 24x32 HDF: 60x96, 30x96,60x48, 30x48-4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) PTS SS RTRW PTS 8x4 Only SS SS SS RTRW PTS SS SS SS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY Budget Grade MAHOGANY-GENUINE (HAYA) X X X X X X MAHOGANY-SIPO X X X (HAYA) X X X X X X X X X X X X X X X X X X MAHOGANY - SAPELE Birds Eye - X X X X X X urly - X X X X X X alico / Mixed - X X X X X X X X X X X X X X X X X X X X X X X X X X MAPLE - HARD X X X X X X X X X X X X X X X X X X X X X X (Straight Grain) X X X X X X Wormy Grade Raw Paint Grade Raw - MEDEX (NAUF) Paint Grade MAPLE - SOFT X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Ultra X X X X X X X X X X X X X X X X X X X X X X OA-RED X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Rift Sawn (Straight Grain) X X X X X X OA-WHITE X X X X X X Rift Sawn (Straight Grain) notty Grade X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X PINE-NORTHERN WHITE alico / Mixed - Green - X X X X X X White - POPLAR X X X X X X X X X X X X X X X X X X X X WALNUT No Sap - X X X X X X X X X X Architectural Grade s Please see Section.2. All Other Wood Species Please call for quote and availability. 99.7% American Made.1.9
9 Sheet Stock Options s, & ⅜" MEDEX 7 /32" ore A or B Face ore, A4 ore, A4 ore, A1 Part #185 Availability harts.219" [5.6mm].198" [5.0mm] +/-.012".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005" SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size.375" [9.5mm].250" [6.4mm] (4'x8' or 5'x9') Various Grade Backs (8'x4') Drawer Box Bottom (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS 8 x 4 Only SS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X X X X X X X ALDER ANIGRE-MEDIUM FIGURE Mill Grade Brown - X X X ASH White - Flat Grain Blond Vertical Grain BAMBOO aramelized Flat Grain Vertical Grain BEEH-EUROPEAN Steamed - X X X X X X Baltic - Mill Grade alico / Mixed - X X X X X X X X X X X - WPF X X X X X X Red - BIH Red - White - X X X X X X White - - WPF BUTTERNUT No Sap - X X X X X X X X X X X Gummy Grade X X X X X X X X X X X X X X X X X X X X X X Ultra X X X X X X HERRY X X X YPRESS ELM-red Red - Mill Grade eucalyptus-red grandis FIR-douglas (Straight Grain) Reconstituted HDF Raw Paint Grade No Sap (Straight Grain) X X X Brown - alico / Mixed - X X X X X X X X X X X X X X X X X X X X X X HIORY Ultra JATOBA Mill Grade White (Phone) :00AM - 4:30PM ST (24 Hour Fax)
10 s, & Sheet Stock Options ⅜" MEDEX 7 /32" ore A or B Face ore, A4 ore, A4 ore, A1 Part #185 Availability hart.219" [5.6mm].198" [5.0mm] +/-.012".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005" SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size.375" [9.5mm].250" [6.4mm] (4'x8' or 5'x9') Various Grade Backs (8'x4') Drawer Box Bottom (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS 8x4 Only SS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY Budget Grade X X X MAHOGANY-GENUINE (HAYA) X X X X X X MAHOGANY-SIPO (HAYA) MAHOGANY-SAPELE Birds Eye - urly - alico / Mixed - X X X X X X X X X X X X MAPLE-HARD X X X X X X X X X X X X X X X X (Straight Grain) Wormy Grade MAPLE-SOFT Raw Paint Grade X X X X X X Raw - MEDEX (NAUF) Paint Grade X X X X X X X X X X X X X X X X X X Ultra X X X X X X X X X X X X X X X X OA-RED X X X X X X X X X X X X Rift Sawn (Straight Grain) X X X X X X X X X X X X OA-WHITE X X X X X X Rift Sawn (Straight Grain) notty Grade X X X X X X X X X PINE-NORTHERN WHITE alico / Mixed - X X X Green - X X X White - POPLAR X X X X X X WALNUT No Sap - X X X All Other Wood Species Please see page % American Made.1.11
11 Sheet Stock Options s, & Part #185 Availability harts 15.2mm ore ⅝" ⅝" ore, A1 ⅝" ore, A1 12.0mm ore ½" ½" ore, A1 ½" ore, A1 SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size " +.02"/-.03".625" [15.9mm].625" [15.9mm].625" [15.9mm] +0"/-.015".472" +.02"/-.03".500" [12.7mm].500" [12.7mm].500" [12.7mm] +0"/-.015" (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X ALDER X X X ANIGRE-MEDIUM FIGURE Mill Grade Brown - ASH White - Flat Grain Blond BAMBOO Vertical Grain Flat Grain aramelized Vertical Grain BEEH European Steamed - Baltic - Mill Grade X X X X X X alico / Mixed - X X X X X X X X X X X X - WPF Red - BIH Red - White - X X X X X X X X X X X X White - - WPF BUTTERNUT No Sap - X X X X X X X X X X X X Gummy Grade X X X X X X X X X X X X X X X X X X X X X X X X Ultra (Phone) :00AM - 4:30PM ST (24 Hour Fax) HERRY YPRESS ELM-RED Mill Grade EUALYPTUS-RED GRANDIS FIR-DOUGLAS (Straight Grain) Reconstituted HDF Raw Paint Grade No Sap (Straight Grain) Brown - alico / Mixed - X X X X X X Ultra HIORY White - JATOBA Mill Grade
12 s, & Sheet Stock Options Part #185 Availability harts 15.2mm ore ⅝" ⅝" ore, A1 ⅝" ore, A1 12.0mm ore ½" ½" ore, A1 ½" ore, A1 SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size.598" +.02"/-.03".625" [15.9mm].625" [15.9mm].625" [15.9mm] +0"/-.015".472" +.02"/-.03".500" [12.7mm].500" [12.7mm].500" [12.7mm] +0"/-.015" (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY Budget Grade MAHOGANY-GENUINE (HAYA) MAHOGANY-SIPO (HAYA) MAHOGANY-SAPELE Birds Eye - urly - alico / Mixed - X X X X X X X X X X X X X X X X X X X X X X X X (Straight Grain) Wormy Grade Raw Paint Grade X X X X X X Raw - MEDEX (NAUF) Paint Grade MAPLE-HARD MAPLE-SOFT Ultra X X X X X X X X X X X X X X X X X X X X X X X X OA-RED Rift Sawn (Straight Grain) 99.7% American Made OA-WHITE X X X X X X Rift Sawn (Straight Grain) notty Grade PINE-NORTHERN WHITE alico / Mixed - Green - White - POPLAR WALNUT No Sap - All Other Wood Species Please call for quote and availability..1.13
13 Sheet Stock Options s, & 1" ⅞" ore, A1 ore A or B Face ore AA Face 18.0mm ore ¹¹/16" ¹¹/16" ombi-ore Part #185 Availability harts 1.00" [25.4mm].875" [22.2mm] +0"/-.015" +0"/-.015".709" +.03"/-.04".687" [17.4mm].687" [17.4mm] SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size (5'x8') #1 Grade Back Door Grade (See Section.1 - Product atalog for ut/rip Size Desc.) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X ALDER X X X ANIGRE-MEDIUM FIGURE Mill Grade Brown - ASH White - Flat Grain Blond Vertical Grain Flat Grain aramelized Vertical Grain BAMBOO BEEH-EUROPEAN Steamed - Baltic - Mill Grade X X X alico / Mixed - X X X X X X - WPF Red - BIH Red - White - X X X X X X White - - WPF BUTTERNUT No Sap - X X X X X X Gummy Grade X X X X X X X X X X X X Ultra HERRY No Sap (Straight Grain) YPRESS ELM-RED Mill Grade EUALYPTUS-RED GRANDIS FIR-DOUGLAS (Straight Grain) Reconstituted HDF Raw Paint Grade Brown - alico / Mixed - X X X X X X X X X X X X HIORY Ultra JATOBA Mill Grade White (Phone) :00AM - 4:30PM ST (24 Hour Fax)
14 s, & Sheet Stock Options 1" ⅞" ore, A1 ore A or B Face ore AA Face 18.0mm ore ¹¹/16" ¹¹/16" ombi-ore Part #185 Availability harts 1.00" [25.4mm].875" [22.2mm] +0"/-.015" +0"/-.015".709" +.03"/-.04".687" [17.4mm].687" [17.4mm] SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size (5'x8') #1 Grade Back Door Grade (See Section.1 - Product atalog for ut/rip Size Desc.) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY Budget Grade MAHOGANY-GENUINE (HAYA) Birds Eye - urly - alico / Mixed - MAHOGANY-SIPO (HAYA) MAHOGANY-SAPELE (HAYA) X X X X X X MAPLE-HARD X X X X X X X X X X X X X X X X X X X X X X X X (Straight Grain) Wormy Grade MAPLE-SOFT Raw Paint Grade X X X X X X X X X X X X X X X Raw - MEDEX (NAUF) Paint Grade X X X X X X X X X X X X X X X X X X Ultra X X X X X X X X X X X X notty Grade OA-RED Rift Sawn (Straight Grain) OA-WHITE Rift Sawn (Straight Grain) PINE-NORTHERN WHITE alico / Mixed - Green - White - POPLAR WALNUT No Sap - All Other Wood Species Please call for quote and availability. 99.7% American Made.1.15
Veneer Sheet Stock and Panel Descriptions
Descriptions Let WalzCraft be your Single Source Provider! and Panel Descriptions All ⅛" and panels have an A grade veneer on the face. All veneers are book matched on the face side, with the exception
More informationVeneered & Edgebanded
abinet Doors & Drawer Fronts Veneered & Edgebanded Style 60 - Veneered ¾" MDF ore Doors & Drawer Fronts Walzraft has created the Style 60 Veneered Door and Drawer Front with a wide range of design flexibility.
More informationHigh Pressure Laminate (HPL) Doors & Drawer Fronts. High Pressure Laminate (HPL) Stock Colors / Finishes
High Pressure Laminate (HPL) High Pressure Laminate (HPL) Doors & Drawer Fronts Style: 2224 ⅝" Thick with HPL-2 P:700 ⅝" Thick with HPL-4 P:701 ¾" Thick with HPL-2 P:710 ¾" Thick with HPL-4 P:711 Style:
More informationPaperbacked Veneer: 2' x 8'
Paperbacked Veneer: 2' x 8' 10 mil Lead Time 10 mil Lead Time Alder, Red, Clear $ 49.90 1 Day Sycamore, English, Figured $ 158.20 8 Days Alder, Red, Knotty $ 46.90 1 Day Teak, Flat Cut $ 75.60 5 Days Anigre,
More informationWainscot - Raised Panel. (Drawn at 121½"W x 32½"H, 9 Equal PanelsWide) Style: 10W - 9 Panels Wide
Raised Panel Wainscot - Raised Panel (Drawn at 121½"W x 32½"H, 9 Equal PanelsWide) Style: 10W - 9 Panels Wide 60/40 Split (Drawn at 55½"W x 32½"H, 4 Equal Panels Wide) Style: 10W - 4 Panels Wide Style:
More informationVeneered & Edgebanded - Reconstituted Veneer
abinet Door & Drawer Front Options Veneered & Edgebanded - Reconstituted Veneer Style 60 - Architectural Grade / Reconstituted / omposite Veneer Architectural Grade / Reconstituted / omposite Veneer is
More informationFLUSH WOOD DOOR AND MODERN JAMB SPECIFICATION GUIDE
TRU&MODERN FLUSH WOOD DOOR AND MODERN JAMB SPECIFICATION GUIDE The Tru&Modern Flush Door (TMF Series) product represents a whole new approach to the flush door. One where we engineer for quality and beauty
More informationMDF 1-Piece / 3D Laminate (RTF)
abinet Doors & s MDF 1-Piece / 3D Laminate (RTF) MDF 1-Piece Doors & - Standard Style: 500* Style: 501* Style: 500 Style: 501 Raised Panel Style: 518 Style: 521 Style: 522 Style: 580* See next page for
More informationStyle 100HB - Half Blind Dovetail Drawer Boxes (Solid Wood & Baltic Birch)
Drawer Box Styles - 00B (alf Blind Dovetail) - alf Blind Dovetail Drawer Boxes () alf Blind Dovetail Shown with TE4 Top Edge Option - alf Blind Dovetail Drawer Boxes - Bottom Panel Inset Options Bottom
More informationMDF 1-Piece / 3D Laminate (RTF)
abinet Door & Drawer Front Options MDF 1-Piece / 3D Laminate (RTF) Raw MDF Door & Drawer Front onstruction and Ordering MDF doors and drawer fronts are constructed of premium, ¾" [19.1mm] or 1" [25.4mm]
More informationMurphy Company. Stewardship
Hardwood Plywood Murphy Company Murphy Company is a third generation, family owned wood products manufacturer located in the Pacific Northwest. Murphy hardwood and custom panel products are produced at
More informationProducts that deliver. the difference CALIFORNIA DIVISION
Products that deliver the difference CALIFORNIA DIVISION Decorative Surfaces TFL Egger Discover the huge variety of combinations in the new EGGER Decorative Collection valuable inspiration, smart solutions
More informationDecorative Laminate Veneer (DLV) Doors & Accessories
abinet Door & Drawer Front Options Style: 41M Decorative Laminate Veneer (DLV) Doors & Drawer Fronts Style: 41M* Drawer Front Decorative Laminate Veneer (DLV) Flat Panel Mitered Doors Available in 5 olors
More informationLook C Drawer Front. ¾" Door. ¾" Door. ¾" Door. Drawer Fronts - Slab and RP (Raised Panel) ¾" Door D33 SR RPC* D33.
Drawer Front Looks - ompatible with ¾" [19.1mm] Thick Doors These Drawer Front Looks are compatible with doors that are ¾" [19.1mm] thick. When ordering you will need to determine which Look best suits
More informationProducts that deliver. the difference ONTARIO DIVISION
Products that deliver the difference ONTARIO DIVISION Decorative Surfaces TFL Prism Arauco s largest TFL collection ever offers nearly 100 of the most contemporary solid colours, prints and woodgrains.
More informationMitered Mortise & Tenon - Raised Panel
abinet Door & Drawer Front Options Mitered Mortise & Tenon - Raised Panel Style: 10M P: 301 Frame: P301 x 0.6 Min. Size: 8x8 [03.mm x 03.mm] Style: 10M* Drawer Front P: 301 Frame: P301 x 0.6 Min. Size:
More informationFLEXWOOD FLEXWOOD ARCHITECTURAL PANELS WOODTRIM. Flexwood Flexwood WOW Prefinished Flexwood Flexwood PolyBak
FLEXWOOD FLEXWOOD Flexwood Flexwood WOW Prefinished Flexwood Flexwood PolyBak FLEXWOOD ARCHITECTURAL PANELS Sequenced Matched Blue Print Matched Cross Grain Panels Up to 5 x 12 and 12 x 5 Available Architectural
More informationTOPEKA Conversion Factors Lineal Feet to Board Feet Size Factor Size Factor NW Hwy 24, Silver Lake, KS 66539
INVENTORY ITEMS WESTERN RED CEDAR SIDING CLEAR VERTICAL GRAIN, KILN DRIED 3 THRU 20. 1/2 X 4 SMOOTH CEDAR LAP 1/2 X 6 SMOOTH CEDAR LAP 1/2 X 8 SMOOTH CEDAR LAP. 3/4 X 10 SMOOTH CEDAR LAP HAIDA BRAND WESTERN
More informationA & F Wood Products, Inc 5665 Sterling Drive Howell, Michigan Phone: Fax: Toll Free:
Machining Specifications Flush 20 Minute Door HINGES: Up to 3/0 x 7/0: 4 high x 105 steel, mortised, Surface (labeled self-closing spring type) 4.5 X 134 steel, mortised, surface. Over 3/0 x 7/0: 4.5 high
More informationMurphy Company. Stewardship
Hardwood Plywood Murphy Company Murphy Company is a third generation, family owned wood products manufacturer located in the Pacific Northwest. Murphy hardwood and custom panel products are produced at
More informationDOOR COMPONENTS. from Ferche Millwork. Astragals. Jambs Mull Center Stop Brickmould. Sills Thresholds. Rated Frames
DOOR COMPONENTS from Ferche Millwork Ferche Millwork is your one-stop-shop for all your door hanging needs. Interior, exterior, residential or commercial, we have it or can make it! Astragals Jambs Mull
More informationL u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E
L u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E L U M B E R x o t i c L u m b e r M D F V e n e e r M
More informationStyle 10* Price Class: 540 Min. Size: 8x8. Style 1010 Price Class: 541 Min. Size: 13 3 /4x8. Price Class: 551 Min. Size: 9 3 /4X6 5 /8
5-Piece MD It s easy to order from Walzraft! Style 34SQ Drawer ront (See page 164-Look A ) Price lass: 1001 Min. Size: 3x3 Style 10 Price lass: 540 Min. Size: 8x8 Style 10* Price lass: 540 Min. Size: 8x8
More informationv t industries VENEER GUIDELINES
v t industries VENEER GUIDELINES 1 VT wood veneers PLAin SLICed NAturAL MAPLE NAturAL VAriAtiOns The word natural brings to mind certain connotations like beauty, warmth and purity. Merriam-Webster defines
More informationMISCELLANEOUS PRODUCTS
MISCELLANEOUS PRODUCTS PAGE 86 632 Shelley St Springfield, OR 97477 PHONE: 541.689.8515 TOLL FREE: 800.TPH.WOOD BREADBOARD & BUTCHER BLOCK ALDER BREADBOARD ABOUT THIS PRODUCT Solid lay-up from surfaced
More informationFACTORY-FINISHED STAINED WOOD DOORS
FACTORY-FINISHED STAINED WOOD DOORS Complete Designer Stain Collection ARCHITECTURAL Make a Statement with Natural Beauty Professionally crafted wood doors leave a stunning, lasting impression. Masonite
More informationImola. elmwood fine custom cabinetry. scroll for more information. General Specifications. Prime Center Panel. Additional Panel Options
4.7 5. 5.7 General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 3/8 thick veneer flat center panel, virtually flush with back of rails. See drawings for
More informationFace Frame Stock Notes - Square
Face Frame Stock - Square FS100 Face Frame Stock - Square Face Frame Stock Notes - Square 1) Pricing Please see Section 1 of the Wholesale Pricing atalog. 2) FS100 Straight lineal square stock run through
More informationDecorative Laminate Veneer (DLV) Doors & Accessories
abinet Door & Drawer Front Options Decorative Laminate Veneer (DLV) Doors & Drawer Fronts Style: 41M Style: 41M* Drawer Front Decorative Laminate Veneer (DLV) Flat Panel Mitered Doors Available in 5 olors
More informationL u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E
L u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E PLYWOOD & VENEERS x o t i c L u m b e r M D F V e n e
More informationWood Purchasing. Handbook. Hardwood Lumber & Plywood
Wood Purchasing Handbook Hardwood Lumber & Plywood Educating customers to the product grading standards not only assists in proper wood buying decisions it also shows true industry leadership! Dana Spessert,
More informationProduct Guide Specification For Nonrated & 20-Minute Rated Doors
Woodtech Trading Company 455 Fourth Avenue E.N. P.O. Box 2609 Columbia Falls, MT 59912 800-775-1352 (phone) 800-775-1353 (fax) www.woodtechdoor.com Product Guide Specification For Nonrated & 20-Minute
More informationChamberlain. elmwood fine custom cabinetry. scroll for more information. Prime Center Panel. Raised Center Panel Options. General Specifications
2.2 4.7 General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 1/ Veneer Center Panel. See drawings for other available options. Rail/Stile Size Options:
More informationImola 44. elmwood fine custom cabinetry. scroll for more information. General Specifications. Prime Center Panel. Additional Panel Options
General Specifications Prime Center Panel 4.7 5. 5.7 Door Construction: 5 Piece MDF with 44 applied moulding around the outside of the rails. Center Panel Construction: 3/8 recessed panel. See drawings
More informationDIEBOARDS & PLYWOOD. Flat Dieboards. Rotary Dieboards. Plywood. Other Sheet Materials
DIEBOARDS & PLYWOOD In addition to supplying the highest quality pattern grade lumbers for over 100 years, Freeman offers flat and rotary dieboards, a variety of high-grade, economical plywoods, and specialty
More informationFenwick. elmwood fine custom cabinetry. scroll for more information. Prime Center Panel. Matching Raised Panel Option. General Specifications
General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 1/ Veneer Center Panel. See drawings for other available options. Rail/Stile Size Options: Default/Prime
More informationArch. Doors P S S 4 L L L L S. Lumber Core. Sketch Face Door. embossed. following:
Arch itectural Doors In addition to our stock standard flush doors including Red Oak, Birch, Lauan, Prime and hardboard embossed prefinished we offer 5 ply architectural doors which include the following:
More informationProducts that deliver. the difference PACIFIC NORTHWEST DIVISION
Products that deliver the difference PACIFIC NORTHWEST DIVISION Decorative Surfaces TFL Prism Arauco s largest TFL collection ever offers nearly 100 of the most contemporary solid colors, prints and woodgrains.
More informationForest Hill. elmwood fine custom cabinetry. Prime Center Panel. scroll for more information. Additional Flat Panel Options. General Specifications
5.2 General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 3/8 thick veneer center panel. See drawings for other available options. Rail/Stile Size Options:
More informationMade by hands. Flooring Selections
Made by hands. Flooring Selections Wood Grades Wood Species SELECT GRADE (WHITE OAK) KNOTTY GRADE (WHITE OAK) Some wood species can be designated by grade, such as knotty (sometimes called character or
More informationMOULDING & MILLWORK FALL 2017
MOULDING & MILLWORK FALL 2017 Our specially trained millwork team can help you find your perfect style. Visit our showroom to get started. TABLE OF CONTENTS Casings...2 Base... 3 Crown... 4 Miscellaneous...5-6
More informationA R C H I T E C T U R A L P A N E L S & V E N E E R S
L u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e A R C H I T E C T U R A L P A N E L S & V E N E E R S c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E
More informationTable of Contents. The Paxton Advantage. Decorative Surfaces Are Used Everywhere!
www.paxtonwood.com The Paxton Advantage Decorative Surfaces Are Used Everywhere! Today, residential and commercial interior designers have available to them a broader range than ever before of decorative
More informationHardwood plywood. It s as attractive as it is versatile, When you re dedicated to providing the most impressive
HARDWOOD PLYWOOD From seed to finish, we do it all. Hardwood plywood. It s as attractive as it is versatile, reflecting nature s understated beauty alongside technological breakthroughs. And for over 90
More informationFrom Seed to Finish, We Do it All.
HARDWOOD PLYWOOD From Seed to Finish, We Do it All. Hardwood plywood. It s as attractive as it is versatile, reflecting nature s understated beauty alongside technological breakthroughs. And for over 90
More informationAn Extensive Inventory of Premium Hardwood Lumber
L c x e P u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E o t i c L u m b e r M D F V e n e e r M o u l d
More informationWhen You Think of Wood, Think of Us
veneer and architectural panels technical reference guide When You Think of Wood, Think of Us TABLE OF CONTENTS 800.964.7804 EXPERIENCE THE FASHION OF WOOD VENEERS PRODUCT SUMMARY 3 SPECIFYING VENEER 5
More informationJUNE 2005 WHOLESALE PRICE LIST CATALOG #105
JUNE 2005 WHOLESALE PRICE LIST CATALOG #105 14002 CANYON ROAD E. PUYALLUP, WASHINGTON 98373 (253) 531-9132 FAX (253) 531-8271 1-888-531-9132 email: sales@ruckmanscabdoor.com DOOR ORDER FORM CUSTOMER JOB
More informationSuperior. variety of options for faces, backs, quality. With Roseburg, you have a wide. finishes and cores. From Oak to
www.roseburg.com Superior quality With Roseburg, you have a wide variety of options for faces, backs, finishes and cores. From Oak to exotic Anegre, we deliver a world of options in hardwood panels. Contents
More informationFinished Products Guide
Finished Products Guide Hardwood Flooring Tongue & Groove Paneling Custom Moldings Shawano Location W7447 Anderson Ave. Shawano, WI 54166 Toll-free: 800-462-7440 Local: 715-524-4314 Fax: 715-526-4997 Store
More informationWood Purchasing. Handbook. Hardwood Lumber & Plywood
Wood Purchasing Handbook Hardwood Lumber & Plywood Contents Introduction... 2 Purchasing Check List... 2 Receiving Lumber... 3 Purchasing on Net Tally or Gross Tally...4 Moisture Content...5 Lumber Grading
More informationSuwanee Lumber Specialty Woods
Suwanee Lumber Specialty Woods Ash Ash is a ring-porous wood with prominent growth ring patterns. The sapwood is light in color and can vary from a creamy color to nearly white. Depending on the species,
More informationSize Specifications. Specifications. Bow, Warp and Twist Tolerances
Size A minimum size dimension is listed for each door and drawer front. When ordering, one of the minimums must be exceeded by at least ". For example, if a door minimum is listed at 10" x 10", the door
More informationPOCKET CATALOGUE Hwy 3 PO Box 190 Cayuga, ON N0A 1E0 talbotwood.com
POCKET CATALOGUE 5585 Hwy 3 PO Box 190 Cayuga, ON N0A 1E0 talbotwood.com CASINGS 9 INDEX Wood Species... 2 Our Products... 3 Casings... 4 Light Valance & Sills... 7 Backbands & Caps... 8 Casing Backband
More informationMDF 1-Piece / 3D Laminate (RTF)
MDF 1-Piece / 3D Laminate (RTF) Raw MDF Door & Drawer Front Construction and Ordering MDF doors and drawer fronts are constructed of premium, ¾" [19.1mm] or 1" [25.4mm] thick 48# MDF that is precision
More informationVULCANUS D O O R F R A M E S
VULCANUS F I R E - R A T E D D O O R F R A M E S WHERE SAFETY MEETS STYLE. FIRE-RATED DOOR FRAMES Contact Industries offers a wide range of interior and exterior fire-rated door frames designed to fit
More informationAttachment A BURLINGTON NORTHERN SANTA FE SPECIFICATIONS FOR CROSS TIES AND SWITCH TIES I. GENERAL
Attachment A BURLINGTON NORTHERN SANTA FE SPECIFICATIONS FOR CROSS TIES AND SWITCH TIES I. GENERAL 101. Scope: (a) This specification shall cover the manufacturing of grade 3, 4, 5 & SG cross ties and
More informationBeech, American American Beech grows in Canada and the United States. It contains white sapwood and reddish heartwood with a closed, straight grain. A
Alder Alder has become the preferred Cherry substitute for residential cabinetry and millwork. The excellent machining and finishing characteristics coupled with the cost savings make Alder the easy choice
More informationTHE BOX GUIDE. Standard: Optional:
This guide gives you all the information you need for selecting the components and accessories for your kitchen. Please call 203.453.0546 if you have questions or need assistance with the order process.
More informationWood Specifications. The color tones of European beech consist of a range of red to brown. This grade will be uniform in color and grain matched.
Wood Specifications The infinite variety in color, grain and teture is what gives wood its rich character and natural warmth. Along with all of the differences among varying wood species, no two trees
More informationCarpentry Canadian 3rd Edition Vogt TEST BANK Full download at:
UNIT 5 Carpentry Canadian 3rd Edition Vogt SOLUTIONS MANUAL Full download at: https://testbankreal.com/download/carpentry-canadian-3rd-editionvogt-solutions-manual/ Carpentry Canadian 3rd Edition Vogt
More informationTRINITY SURFACES PORTFOLIO HARDWOOD WALL PLANKS
TRINITY SURFACES PORTFOLIO HARDWOOD WALL PLANKS PORTFOLIO Portfolio wall planks can be installed vertically, horizontally or diagonally and are an architectural element that will transform your space.
More informationPRODUCT-SPECIFIC CATALOGS
CABINET REFACING PRODUCT-SPECIFIC CATALOGS Call our friendly customer service staff to request any or all of these five catalogs. For prices and detailed specifications, contact us and we will send you
More informationTH 3TREET s 0RINCETON -. s &! w ww. dis tinctive do o r de si g ns.co m
TH 3TREET s 0RINCETON -. s &! 8 800.36 6.1 6 3 1 w ww. dis tinctive do o r de si g ns.co m PROD C C OG WE DELIVER QUALITY PRODUCTS In 1987 Distinctive Door Designs, Inc. began manufacturing cabinet doors
More informationFLOORING LUMBER LO GS TABLE TOPS 39 SPECIES 40 GRADES 41 PATTERNS 42 LENGTHS & THICKNESS 44 ASSOCIATIONS 47 LOG BUYING
www.grafbro.com FLOORING HICKORY CHARACTER P/S 5 WHITE OAK SELECT QTD. 7 WALNUT SELECT R/Q 9 WHITE OAK CHARACTER CHARACTER & BETTER 11 WALNUT CHARACTER P/S 13 HICKORY CHARACTER P/S 15 WALNUT SELECT R/Q
More informationArchitectural Woodwork Standards SECTION - 4 Sheet Products
Architectural Woodwork Standards SECTION - Sheet Products Section - Sheet Products (Page 1 of 31) SECTION SHEET PRODUCTS - WOOD & NON-WOOD FACED (Including: Hardwood and Softwood Veneer, High-Pressure
More informationStile & Rail - Traditional Mortise & Tenon Joinery
Profile Options Stile & Rail - Traditional Mortise & Tenon Joinery ¾" [19.1] Thick Traditional Door and Frame onstruction SR100 SR100GRF #814 #814 SR101 SR101GRF #880 #880 SR102 SR102GRF #813 #813 * #815
More informationDANNY S CABINETS & MFG
fold BEAUTIFUL DOORS AND DRAWERS DANNY S CABINETS & MFG 615 Trice Cemetery Rd., Thomaston, GA 30286 phone: 706.647.9287 fax: 706.646.3487 www.dannysmfg.com Graphic Design by db graphix fold DANNY S CABINETS
More informationSECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
More informationUnit 2 Engineered Panels
Unit 2 Engineered Panels MULTICHOICE 1. What is another name for large, reconstituted wood sheets or panels? (A) formed panels (B) engineered panels (C) architectural panels (D) construction panels 2.
More informationSOBO USA INVENTORY AS OF 07/06/2015
SOBO USA INVENTORY AS OF 07/06/2015 Species: Quartered Khaya /M' 1/16" "A" Panel 6,542 Ribbon/BrokenStripe 8'-10' $400-$500 1/16" "A/B" Panel 8,305 Ribbon/BrokenStripe 8'-10' $350-$400 1/16" Sound Panel
More informationWood Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Mott casewk can meet the most demanding specification, whether it is AWI Premium an architect's 'signature' specification. We manufacture using premium grade
More informationArchitectural Woodwork Standards SECTION - 3 LUMBER
Architectural Woodwork Standards SECTION - 3 LUMBER 3 Section 3 - Lumber (Page 1 of 18) 1 INFORMATION 1.1 GRADES SECTION 3 LUMBER (Including: Hardwood and Softwood) 1.1.1 GRADE CLASSIFICATIONS ECONOMY,
More informationSHEET PRODUCTS SHEET PAGE treeproductshardwood.com
PRODUCTS PAGE 3 HARDWOOD PLYWOOD HARDWOOD PLYWOOD CORE TYPES The hardwood plywood family of products includes panel products constructed with core material made from: veneer (softwood or hardwood, which
More informationNEW! Introduces High Definition Engineered Veneer
NEW! Introduces High Definition Engineered Veneer EVOLUTION HD No more nightmares of broken sequence in sheet veneer! No more nightmares with edgebanding that did not match the face! From its design, the
More informationNWFA/NOFMA International Standards for Unfinished Solid Wood Flooring
NWFA/NOFMA International Standards for Unfinished Solid Wood Flooring 111 Chesterfield Industrial Boulevard Chesterfield, MO 63005 800.422.4556 (USA & Canada) 636.519.9663 (International) 1 National Wood
More informationTotal BF. Total. Item Number Species Thick. Description. ASH112 Ash 6/4 Rustic Ash 159 $ BEE102 Beech 4/4 & 5/4 Beech 896 $716.
Item Number Species Thick. Description Total BF Total ASH112 Ash 6/4 Rustic Ash 159 $120.00 BEE102 Beech 4/4 & 5/4 Beech 896 $716.80 BEE103 Beech 4/4 Quartersawn Beech 700 $1,575.00 BEE104 Beech 4/4 Quartersawn
More informationPRODUCT CATALOGUE WOOD PRODUCTS:
2009 200 PRODUCT CATALOGUE WOOD PRODUCTS: VitalWOOD VitalWOOD MDF MDF Melamine Boards VitalFLOOR HDF Laminated Flooring VitalPLY Plywood VitalPLY WBP Marine Plywood VitalBOARD Hard Board BMD sales@vital.com.sg
More informationFor PRICING See Section F.2 in our current Wholesale Pricing Catalog. MJ1 45 Outside Corner (22½ Miter Cut) MJ2 45 Inside Corner (22½ Miter Cut)
"Outside orner" Joinery Options "Inside orner" Joinery Options J1 45 Outside orner (22½ iter ut) J2 45 Inside orner (22½ iter ut) ack ack ace/ront ace/ront J3 90 Outside orner (45 iter ut) J4 90 Inside
More informationBRAZOS FOREST PRODUCTS PRODUCT LISTINGS
BRAZOS FOREST PRODUCTS PRODUCT LISTINGS July 2016 STOCK MOULDINGS 8010 9/16 x 2-3/4 Alder Ash Beech Cherry Hickory Maple Poplar Red/White oak Walnut 8009 9/16 x 3-5/8 Alder Ash Beech Cherry Hickory Maple
More informationH.I.T FACTORY DIRECT IMPORTER
Birch s BIRCH PLYWOOD 81-744 5.2mm x 4 x 8 White Birch 81-746 12mm x 4 x 8 White Birch 81-748 15mm x 4 x 8 White Birch 81-748C 15mm x 4 x 8 C-2 White Birch 81-750 18mm x 4 x 8 C-2 White Birch 81-752 18mm
More informationBOOK OF MOLDINGS ~ 8TH EDITION W W P E E C. C O AN AMHERST WOODWORKING W O & SUPPLY, INC. COMPANY
BOOK OF MOLDINGS ~ 8TH EDITION 800.532.9110 WWW.COPPERBEECH.COM W W P E E C. C O AN AMHERST WOODWORKING W O & SUPPLY, INC. COMPANY WE ARE PROUD TO PRESENT THE 8TH EDITION OF OUR MOLDING CATALOG OVER 850
More informationDemilune 4. Apron Joinery. Curved Apron Tenon. Bridle Joint Legs. Bridle Joint Front Apron
Demilune Email 4 Apron Joinery There are two types of joints used in connecting the aprons and legs. The rear legs use conventional mortise and tenon joints, while the front legs use the less conventional
More informationContents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)
WOOD CABINET LINES Contents E-Line Series (Wood Casework)... 2-3 K-Line Series (Wood Casework)... 4-5 D-Line Series (Wood Casework)... 6-7 L-Line Series (Wood Casework)... 8-9 M-Line Series (MDF Casework)...
More informationSIDING INFORMATION. Red Cedar Douglas Fir Redwood Alder. Hemlock Poplar Pine Oak
SIDING SIDING DINGEWOOD SIDING is the best alternative to reclaimed wood. O ur color and our pricing will send wicked chills up and down your s pine, shocking your soul waves of delight! Our siding is
More informationStocking List. Hardwood Lumber page 2. Hardwood Plywood page 3. Melamine page 4. Particle Board page 4. MDF page 4. Veneers page 5.
"Creating Opportunities to Build Trust Through Service" Stocking List Hardwood Lumber page 2 Hardwood Plywood page 3 Melamine page 4 Particle Board page 4 MDF page 4 Veneers page 5 Hardboard page 5 Finished
More informationTHINK LIGHT WEIGHT PANELS The World s Lightest Thick Panels. IPE 4/4 5/4 RGH RWL & DECKING Grooved & Non Grooved SOFTWOOD LUMBER
Apopka - 407-299-4280 Jacksonville - 904-783-0170 www.hooddistribution.com REMANUFACTURING HARDWOODS S2S S4S Straight Line Rip, Gang Rip and T&G DOMESTIC PLYWOOD Alder Birch White Cypress Knotty Pine Maple
More informationDetermining the Chip Load
Edge of Arlington Saw & Tool, Inc 124 So. Collins Street Arlington, Texas 76010 Office (817) 461-7171 Fax (817) 795-6651 eoasaw@mindspring.com Determining the Chip Load In order to determine the chip load
More informationROBERTS PLYWOOD COMPANY
INDEX The source for fine architectural plywood, marine plywood, curved plywood, lumber and veneer. 1 STOCK LIST p. 2-5 PLYWOOD p. 6-8 VENEER p. 9 LUMBER p.10 MARINE PLYWOOD, MELAMINE & SUBSTRATES p.11
More informationDoors & Blinds. Free no obligation survey & quotation service Call: Web:
Workspace Creation Doors & Blinds Free no obligation survey & quotation service Call: 0800 975 4933 Email: sales@avantauk.com Web: www.office-partitions.org.uk Avanta UK Ltd Unit B1 Astra Park Parkside
More informationWood Specifications. The color tones of European beech consist of a range of red to brown. This grade will be uniform in color and grain matched.
Wood Specifications The infinite variety in color, grain and teture is what gives wood its rich character and natural warmth. Along with all of the differences among varying wood species, no two trees
More informationcfkfpe=`^ombkqov=^ka= ^o`efqb`qro^i=tllatloh=á UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS
cfkfpe=`^ombkqov=^ka= =á UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233 fkqolar`qflk Finish carpentry is what can be referred to
More informationEVANS CUSTOM MADE TO ORDER CABINET DOOR, LTD. Cabinet Door Specifications and Pricing
EVANS CABINET DOOR, LTD. Cabinet Door Specifications and Pricing CUSTOM MADE TO ORDER Table Of Contents Raised Panel Doors...3 1/4" Plywood Flat Panel Doors...4 3/8" Solid Wood Flat Panel Doors...5 1/4"
More informationBovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
More informationValley Custom Door 2018 Pricing and Specifications Guide
Valley Custom Door 2018 Pricing and Specifications Guide Welcome and thank you for your interest in Valley Custom Door. Since 1960, we have been manufacturing quality cabinet doors and a wide variety of
More informationA Guide to. Veneers. By Merle E. Visser 28 AUGUST 2017 DOORS + HARDWARE
A Guide to Veneers By Merle E. Visser 28 AUGUST 2017 DOORS + HARDWARE Photos courtesy of Oshkosh Door Company Above: Strips of veneer are loaded, then glued to the vertical edges of doors after being cut
More informationTimberflex & Flexboard Technical Guide
Timberflex & Flexboard Technical Guide A bendable substrate material that can be formed first and laminated last Patent #5,618,601; #5,232,762; #5,824,382 Doors Larger radius and small doors are easily
More informationthe History of Cullman Cabinet & Supply Co.
Volume 4 the History of Cullman Cabinet & Supply Co. For over 65 years, Cullman Cabinet has remained flexible with the times and has brought innovative ideas to the cabinet industry. The founder, Robert
More informationTreefrog Technical Information Guide
Treefrog Technical Information Guide Index Product Reference Sheet:... 2 Product Description:... 3 Size:... 3 Application:... 3 Storage & Handling:.... 3 Protective Mask:.... 4 Cleaning & Maintenance:....
More informationM O D E R N J A M B S Y S T E M S
Casing-Less Jambs Cross-Section of Casing-Less Jamb Installation with Concealed Hinge Phillips U-200 trim or similar Requires jamb installation prior to Jamb width should be same as stud width Swing range
More information