LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles)

Size: px
Start display at page:

Download "LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles)"

Transcription

1 LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of ENGINEERING AND WOODWORKING WORKSHOP TOOLS Including from two deceased estates. Colchester Bantam and Chipmaster lathes, Schobin watchmakers lathe. Milling machines. Reamers, drills, tooling, spares, Workshop tools and spares COLLECTABLE TOOLS SATURDAY 11 th MARCH 2017 Sale to start at 10am (ONLINE BIDDING) Viewing Friday 2-5pm only and Morning of sale from 8am Buyers premium 10%+ VAT ON BUYERS PREMIUM Buyers registration. Caterer in attendance v Donates VAT in catalogue Newmarket House, Market Street, Ledbury, Herefordshire, HR8 2AQ. Tel: Fax: Mobile: Website: auctions@hjpugh.com

2 CONDITIONS OF SALE 1. All prospective purchasers to register to bid and give in their name, address and telephone number, in default of which the lot or lots purchased may be immediately put up again and re-sold 2. The highest bidder to be the buyer. If any dispute arises regarding any bidding the Lot, at the sole discretion of the auctioneers, to be put up and sold again. 3. The bidding to be regulated by the auctioneer. 4. In the case of Lots upon which there is a reserve, the auctioneer shall have the right to bid on behalf of the Vendor. 5. No Lots to be transferable and all accounts to be settled at the close of the sale. 6. The lots to be taken away whether genuine and authentic or not, with all faults and errors of every description and to be at the risk of the purchaser immediately after the fall of the hammer but must be paid for in full before the property in the goods passes to the buyer. The auctioneer will not hold himself responsible for the incorrect description or authenticity of or any fault or defect in any lot and makes no warranty. 7. To prevent inaccuracy and inconvenience in the settlement of purchases, no lot may be removed either during or after the sale without being previously paid for. 8. If any person neglects or refuses to comply with any of the foregoing conditions, the auctioneer shall be at liberty to resell the lot and any deficiency that may arise in the resale, together with all expenses attending it shall be made good by the defaulter. 9. AGENCY. The auctioneer normally acts as agent only and disclaims any responsibility for default by the seller or the buyer 10. WARRANTY OF TITLE AND AVAILABILITY. The seller warrants the auctioneer and the buyer that the seller is the true owner of the property consigned or is properly authorised to consign it for sale and is able to transfer the title of the property free of any third party claims. 11. TERMS - strictly cash. All accounts must be settled on the sale site on day of sale Maximum cash permitted to be taken 7,500. Debit cards accepted. Credit cards accepted subject to a 2% surcharge 12. V.A.T. at the current rate will be added to the purchase price of all goods subject to V.A.T. Goods marked M are sold under the auctioneers V.A.T. Margin Scheme for second hand goods. * Denotes VAT on lots 13. DISCLAIMER OF LIABILITY - Neither the auctioneers, landowners or sellers nor any agent or employee of these bodies accepts any liability for any accident, loss, damage injury to any person or property whatsoever whether cause by their negligence, breach of contract or in any other way. 14. HEALTH AND SAFETY - The auctioneers have taken reasonable precautions to ensure the health and safety of everyone present. For these measures to be effective, everyone must take all reasonable precautions to avoid and prevent accidents occurring and must adhere to instructions of the auctioneers and their porters. 15. All measurements are imperial and for guidance purposes only. Species stated are believed to be correct, but are not guaranteed. 16. ONLINE BIDDING H J Pugh & Co offer an online bidding service via easyliveauction.com for bidders who cannot attend the sale. In completing the bidder registration on and providing your credit card details and unless alternative arrangements are agreed with H J Pugh & Co: 1. authorise H J Pugh & Co, if they so wish, to charge the credit card given in part or full payment, including all fees, for items successfully purchased in the auction via easyliveauction.com, and 2. confirm that you are authorised to provide these credit card details to H J Pugh & Co through and agree that H J Pugh & Co are entitled to ship the goods to the card holder name and card holder address provided in fulfilment of the sale. 3. shipping will be charged at cost to the buyer and will take approx 2-4 working days. Please note that any lots purchased via easyliveauction.com live auction service will be subject to additional commission charge + VAT on the hammer price set out on the easyliveauction.com website

3 1 Carving chisels 2 Tool chest, augers and plane blades 3 Cross cut saw 4 Two man cross cut saws 5 Wooden planes 6 Tool chest, screwdrivers, braces etc 7 Plough and other planes 8 Moulding planes 9 Adze and square 10 Moulding planes 11 Jack trying plane, badger plane and smoother plane 12 Brass backed saws, level, gauge, rule etc. 13 Tool box and moulders 14 2 Brass braces 15 Marking gauges and squares 16 Woodworking books 17 Various smoothing planes 18 Trammel, boxed 19 2 Plough planes 20 Box of old planes 21 Old lock, brass mounted frame, key and mug 22 2 Boxes of old tools 23 Brass back saws, spoke shave etc. 24 Plough and other planes 25 Planes, chisels and marking tools 26 Steel shoulder plane 13/8" 27 Old planes 28 Breast drills etc. 29 Stanley Bailey No.6 plane 30 Record O50C plane and cutters and Stanley No. 78 plane 31 Tool holder 32 Jaw parts, face plates and tools 33 Lathe head 34 Milling cutters 35 Carpenters chest and tools 36 Chisels and mallet 37 Spoke shaves

4 38 Ward trying plane 23" Rosewood infill 39 Scrapers and squares. Including Ward 40 Marking gauges 41 Small wooden plough plane 42 Marples brass and ebony brace 43 Brass shoulder plane with ebony infill 13/8" 44 Brass block plane with ebony infill and 2 others 45 Sorby chariot plane 46 Record 077 block plane 47 No. 13 Circumference plane 48 Stanley Bailey No. 7 plane 49 Record 043 plough plane, boxed 50 Scythe 51 Sledge hammers 52 Chain measure and brackets 53 2 Large hooks 54 Hay knife 55 3 Oil lamps 56 Greenhouse heater 57 Ryobi sanders 58 Spanners and sockets Cans of rust remover 60 Hydraulic pressure test kit 61 Stud extractors and Allen keys 62 Electric 3.3kw workshop heater 63 Double lap flaring tool 64 Brass pipe fittings 65 Hydraulic fittings 66 Hydraulic crimping tool 67 Sykes socket set 68 Punches and chisels 69 Tool chest of seals, bits, copper washers and fuses 70 Air gun and other air tools 71 Blue point sockets 72 Toque multiplier 73 Flashing beacon and lamp 74 Draper threading tools

5 75 Impact sockets 76 Snap-on sockets 77 Britool Allen keys 78 Snap-on screwdrivers, chisels 79 Britool chisel 80 Snap-on punch and chisel 81 Snap-on combination spanners 82 Blue point combination spanners 83 Britool circlip pliers 84 Snap-on combination ratchet spanners 85 Spanners 86 Spanners 87 Spanners and tool box 88 Dremel 89 Soldering kit 90 2 Tool boxes 91 Tool box and contents 92 Makita router 93 Electric spanner 94 Jig saw and drill 95 Rapesco nail gun 96 Ratchets and extensions 97 Ratchets and extensions 98 Sealey 3/4" socket set 99 Faithful boom wrench 100 Faciom 24" wrench 101 Lincon brazing wine 102 Rivetter 103 Gerex electric handsaw 104 Makita nibbler 105 Hitachi C7SB2 hand saw 106 Hydraulic pump 107 Air gun 108 Wheel brace 109 Stainless steel clips 110 Clutch aligning tool 111 Socket bits

6 112 Cutter set 113 Stocks and dies 114 Thread kit 115 Cylinder bore gauge and ring clamps 116 Battery tester, beacon etc 117 Bosch sander and screwdriver 118 Ryobi CAP 144 cordless angle drill 119 Screwdrivers and pliers 120 Air tools and drain kit 121 Work bench 122 Warrior 2500kg pallet truck 123 Makita 9" angle grinder 124 Tyre levers 125 Electric sander, drill, pads etc 126 Hammers 127 Torque wrenches 128 Towing ambulance 129 Parts boxes 130 G and F cramps 131 Parweld TIG welding kit 132 Air hose 133 Spanner set 134 Bearing puller 135 Chain and pulleys 136 Pipe bender and hoist 137 Brake calliper and piston wind kit 138 Combination and ring spanners 139 Lifting clips 140 Record roller conveyors 141 Alfra cut off saw 142 Injector puller 143 Gas pipes, gauges and jets 144 Gas gauges, jets and cutters 145 Cordless inspection camera 146 Sockets 147 New nuts and bolts 148 New nuts and bolts

7 149 Workshop consumables 150 Chainsaw parts 151 Grease gun 152 Draper 36" stilson wrench 153 Workshop consumables Tin cartridge boxes 155 Concept CM wood lathe 156 Box of turning rounds Mixed rounds Oak rounds 159 Woodturning blocks Large mixed rounds 161 Mixed woodturning rounds Oak rounds 163 Set of 4 turned table legs-oak 164 Set of 4 turned table legs-oak 165 Set of 4 turned table legs-pine 166 Set of 4 turned table legs-pine 167 Set of 4 turned table legs-pine 168 Set of 4 table leg blanks-oak 169 Set of 4 table leg blanks-oak 170 Set of 4 short turned legs-oak 171 Set of 4 short turned legs-pine 172 Set of 4 short turned legs-pine 173 Axminster router table 174 Nu-tool CH10 bench drill 175 Lathe parts 176 Dovetail jig 177 Taps and dies 178 Wickes tile cutter 179 Record Marples base plate for router stair jig 180 Tormek wet and dry grinder 181 Drill parts and joint master Tool boxes and contents Boxes of tools 184 Box of planes 185 Box of planes

8 186 Rexon belt sander 187 Tarplaner electric planner 188 Axminster dust extractor Boxes of tools 190 Tool box and contents Boxes of tools Boxes of tools Boxes of tools Boxes of tools 195 Elektra Beckum BAS315 band saw 196 G.S Table saw 197 Rexon dust extractor 198 K5 Woodworker 199 Sealey 2500 power hoist 200 Schaublin milling machine. 3phase 201 Colchester bantam lathe. 1 phase 202 Schaublin lathe. 3 Phase 203 Colchester 600 5X20 chipmaster lathe. 3 Phase 204 Warrior lift table 205 Tracker GX draftsman board Boxes of tools Boxes of tools 208 Sockets and tools 209 Heavy duty cycle carrier 210 Leg vice Boxes of tools and car jacks 212 Parkinsons carpenters vice Tool boxes and contents 214 Slate rip, saw, kindle bundler, hay knife Boxes of tools Boxes of tools Boxes of tools Boxes of tools 219 Tool boxes and contents 220 Mitre saw Metal workshop cabinets 222 Dividing head

9 223 Carpenters bench 224 Air nail gun, nails and tile cutter 225 Air stapler 226 Door furniture 227 Bosch electric drill 228 Makita reciprocating saw 229 Rotary pump 230 Box of tools 231 Floor cramps and vice 232 Record roller stand 233 Hilka bench drill 234 Felsatti mitre/table saw 235 Trolley jack 236 Valdor hand bench drill 237 Hitachi electric hand saw 238 Fruit press 239 Box of tools 240 Record 4" vice 241 Stuart water pump and electric motor 242 Grafton bench drill 243 Black and Decker band saw 244 Glue pot and ladle 245 Generator 246 Old tool chest 247 Drawer unit and contents and metal shelves 248 Powercraft bench drill Hand axes 250 Leg vice 251 Record No 52 carpenters vice 252 Woden No 139 carpenters vice 253 Stanley Bailey, Rapier and Record planes 254 Micrometers 255 Brace bits and hand axes 256 Stanley hand drill. Boxed 257 Staples 258 Gauges and breast drill 259 Dovetail jig

10 260 Welding clamps Cramps and plane 262 Partner 400 chainsaw 263 Chain hoist 264 Saw blades, G cramps etc v265 Tow bar, stand and pins v266 Cables, mirrors and lights v267 Jockey wheels v268 Jack stands v269 Jockey wheel v270 Jack stands v271 Large quantity of towing/trailer fittings v272 Jump leads and lighting kit v273 Wheel clamp, hitch lock and cover v274 Charger adaptor, etc v275 Large quantity of towing/trailer parts v276 Trailer lighting board v277 Trailer lighting board v278 Large quantity of towing/trailer parts v279 Cycle carriers v280 Trailer lighting board v281 Trailer lighting board v282 Moisture trap and refills v283 Wheel clamps -2 v284 Inspection lamps v285 Large quantity of trailer/towing kit v286 Moisture traps v287 Wheel clamps -2 v288 Inspection lamps -4 v289 Moisture trap/strip etc. v290 Wheel clamps- 3 v291 Inspection lamps -4 v292 Wheel clamps -2 v293 Wheel clamps -2 v294 Caravan cover v295 Trailer lighting board v296 Trailer lighting board

11 v297 Wheel clamp and trailer/towing kit v298 Power packs -2 v299 Wheel clamps -2 v300 Wheel clamp and trailer/towing kit v301 Power packs -2 v302 Wheel clamps -2 v303 Wheel clamp and trailer/towing kit v304 Power packs -2 v305 Wheel clamp and trailer/towing kit v306 Mesh trailer sides v307 Trailer lighting board v308 Trailer lighting board v309 Trailer hand winch v310 Light lenses -2 boxes v311 Large heavy duty cycle rack v312 Lighting cables v313 Auto bulbs v314 Trailer covers v315 Security chains -2 v316 Lenses etc v317 Auto cable v318 Trailer chain v319 Trailer chain -2 v320 Power pack -2 v321 Power pack -2 v322 Lighting harness v323 Trailer chains -2 v324 Auto cable v325 Towing mirrors v326 Trailer covers v327 Auto cable v328 Trailer covers v329 Lenses and fog lights v330 Trailer connectors

12 Sat 11 th March Tues 21 st March Sat 1 st April Sat 8 th April Sat 15 th April Sat 1 st July Sat 22 nd July Sat 2 nd Sept LEDBURY SALEROOMS MARKET STREET, LEDBURY 10AM WOODWORKING MACHINERY & TOOLS WORKSHOP & ENGINEERING TOOLS, SEASONED & GREEN SAWN TIMBER LEDBURY SALEROOMS MARKET STREET, LEDBURY 4PM ANTIQUE AND LATER FURNITURE & EFFECTS, PICTURES, PRINTS & COLLECTABLES, RAILWAYANA & MILITARY MEMORABILIA MALVERN. WORCESTERSHIRE Dispersal sale of MODERN AND VINTAGE TRACTORS AND MACHINERY. GRASS LAND EQUIPMENT, TRAILER, VAST SELECTION OF SPARES. HAZLE MEADOWS, ROSS ROAD, LEDBURY HR8 2LP AUCTION SALE OF MODERN TRACTORS, PLANT AND MACHINERY, LIVESTOCK EQUIPMENT, HORTICULTURAL & GARDEN EQUIPMENT, ARCHITECTURAL SALVAGE, SAWN TIMBER AND TOOLS LEDBURY SALEROOMS MARKET STREET, LEDBURY10AM 10 VINTAGE TRACTORS. IMPLEMENTS, ENGINES, ENAMEL SIGNS, MODELS, OTHER COLLECTABLES AND LITERATURE, MILITARYANA. LARGE QUANTITY OF RAILWAYANA SHREWSBURY SHOWGROUND, BERWICK ROAD, SHREWSBURY In conjunction with Mid Shropshire vintage rally SALE OF VINTAGE & CLASSIC TRACTORS, MACHINERY, VEHICLES, ENGINES, SPARES & COLLECTABLES, GARDEN MACHINERY & TOOLS MUCH MARCLE, LEDBURY. HR8 2LX In association with Herefordshire Vintage Steam and Traction Engine Rally VINTAGE & CLASSIC TRACTORS, ENGINES, SPARES & COLLECTA- BLES CLANFIELD, BAMPTON OX18 2RZ LARGE SALE OF MODERN, CLASSIC AND VINTAGE TRACTORS, LOADERS, MACHINERY, SPARES, SMALLHOLDER EQUIPMENT Newmarket House, Market Street, Ledbury, Herefordshire, HR82AQ Tel: (01531) Fax: (01531) Mobile: (07836) Website: auctions@hjpugh.com

PENYLAN FARM, DINGESTOW, MONMOUTH, NP25 4DX

PENYLAN FARM, DINGESTOW, MONMOUTH, NP25 4DX H.J. Pugh & Co. Auctioneers Estate Agents Valuers PENYLAN FARM, DINGESTOW, MONMOUTH, NP25 4DX Dispersal sale for Messrs CJA & DM Yule upon retirement TRACTORS, GRASSLAND MACHINERY AND LIVESTOCK EQUIPMENT

More information

Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm

Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm 001 DeLonghi Radia 1500W heater 002 Bench grinder, Clarke 6", CBG6RP 003 Reciprocating saw, Workzone 710W, 004

More information

LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles)

LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of ENGINEERING AND WOODWORKING MACHINERY, WORKSHOP TOOLS, IRONMONGERY, SAWN TIMBER, TURNING ROUNDS.

More information

South Australian Historical Tool Association. Auction Catalogue

South Australian Historical Tool Association. Auction Catalogue South Australian Historical Tool Association 21st March 2018 "Auction of Vintage Tools" Colonel Light Gardens RSL Auction Catalogue Conditions of Sale: 1. Bidders must be financial members of SAHTA Inc.

More information

Azmeera & Sons.

Azmeera & Sons. +91-8071681915 Azmeera & Sons https://www.indiamart.com/azmeerasons/ We have garnered a distinct position in the market as wholesaler, retailer and trader of a range of Industrial Tools & Accessories.

More information

1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1

1 1 John Deere DI55 48 Cut, 54 hrs 2 1 John Deere L MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L100 3 1 MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 STANDS 8 1 HYDRAULIC JACK 9 1 TROLLEY HYDRAULIC JACK

More information

SALE LISTING of HAND TOOLS etc

SALE LISTING of HAND TOOLS etc Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 9 th March 2019 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery and

More information

SALE LISTING of HAND TOOLS etc

SALE LISTING of HAND TOOLS etc Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 10 th March 2018 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery and

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

H.J. Pugh & Co. LEDBURY SALEROOMS WOODWORKING MACHINERY, TOOLS, SEASONED SAWN TIMBER ENGINEERING MACHINERY, LATHES, MILLS, SAWS, DRILLS

H.J. Pugh & Co. LEDBURY SALEROOMS WOODWORKING MACHINERY, TOOLS, SEASONED SAWN TIMBER ENGINEERING MACHINERY, LATHES, MILLS, SAWS, DRILLS H.J. Pugh & Co. LEDBURY SALEROOMS WOODWORKING MACHINERY, TOOLS, SEASONED SAWN TIMBER ENGINEERING MACHINERY, LATHES, MILLS, SAWS, DRILLS SATURDAY 13 th JANUARY Timber - 10am Tools (online) - 11am V Donates

More information

SALE LISTING of HAND TOOLS etc

SALE LISTING of HAND TOOLS etc Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 1 st July 2017 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery and

More information

We are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc.

We are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc. We are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc. These are highly appreciated for optimum quality, corrosion

More information

Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page 33

Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page 33 Tools Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page Battery Charger Page Torch Page Compressor Page Jacks Page Sockets Page 0 Socket Tester Page Contents Page Tools:

More information

SALE LISTING of HAND TOOLS etc

SALE LISTING of HAND TOOLS etc Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 22 nd September 2018 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery

More information

LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of

LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of LEDBURY SLEROOMS MRKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of SESONED ND GREEN SWN TIMBER, COLLECTBLE WOODWORKING & ENGINEERING TOOLS RESULTS STURDY 7 th JNURY 2017

More information

WTC Industrial Mobile Tooling Cabinet Workstation

WTC Industrial Mobile Tooling Cabinet Workstation WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load

More information

LEDBURY SALEROOMS, HR8 2AQ

LEDBURY SALEROOMS, HR8 2AQ H.J. Pugh & Co. LEDBURY SALEROOMS, HR8 2AQ WOODWORKING MACHINERY, TOOLS, SEASONED SAWN TIMBER ENGINEERING MACHINERY, LATHES, MILLS, SAWS, DRILLS SATURDAY 12 th JANUARY Timber - 10am Tools (online) - 11am

More information

Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table

Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright

More information

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools? ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and

More information

EMB MANUFACTURING INC.

EMB MANUFACTURING INC. TRAILER WOOD PROCESSOR MODELS WP865, WP835, WP635 ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144

More information

PRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid

PRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid 1 1 HITACHI 15" MITER SAW H-440041 2 1 OMGA RN 450 RADIAL ARM SAW "NEW MOTOR" 3 1 POWERMATIC MODEL 68 TABLE SAW SR# 84688183 4 1 RITTER LINE BORING MACHINE MODEL R-123 SR#269 3/3/94 5 1 BLUM MINI PRESS

More information

D.G.W. Auctioneers & Appraisers Phone: (408) Fax: (408)

D.G.W. Auctioneers & Appraisers Phone: (408) Fax: (408) Auctioneers & Appraisers Phone: (408) 245-1863 Fax: (408) 245-1283 760 KIFER Rd, SUNNYVALE, CA - 94086 www.dgwauctioneers.com FREE CATALOG AVAILABLE ONLINE ON SITE AUCTION FOUST INTERIORS 985 Terra Bella

More information

LOT QTY DESCRIPTION NOTE (APPROX) x BLACK & GALV SHEET STEEL, 1 x BAY, UP TO 1800 x 1200mm, VARIOUS GAUGES, APPROX mm

LOT QTY DESCRIPTION NOTE (APPROX) x BLACK & GALV SHEET STEEL, 1 x BAY, UP TO 1800 x 1200mm, VARIOUS GAUGES, APPROX mm 1 PIGEON HOLE STORAGE RACK, 240 x 180cm, 58 x NESTS, WALL MOUNT 2 3 & SINGLE PHASE CIRCUIT BREAKERS, 2-100AMP 3 FABRICATED HAND PRESS, SUIT BENCH TOP MOUNT 4 QUANTITY NYLON INSULATION, 30-100mm DIAMETER

More information

IWB-12 - Industrial Work Bench

IWB-12 - Industrial Work Bench IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number

More information

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity

More information

TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel

TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -

More information

MODEL D DIESEL PILE HAMMER

MODEL D DIESEL PILE HAMMER AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710

More information

PATINA Auction Lot List

PATINA Auction Lot List PATINA Auction Lot List - 2018 LOT # 1 SAHRPENING STONES 2 DREMEL AND PRESS 3 ROTARY TOOL AND ACCESSORIES 4 DRILLING AND BORING TOOLS 5 ANVIL 6 MEASURING TOOLS 7 MISC HAND TOOLS 8 MISC MINI PWR TOOLS (4)

More information

Industrial Tools and Equipments

Industrial Tools and Equipments Industrial Tools and Equipments www.arabigsis.com Serving the industry for over 30 years Industrial Tools Industrial Tools is the flagship division of the company representing various leaders in Industrial

More information

MOVING AUCTION Saturday, June 10:00 AM

MOVING AUCTION Saturday, June 10:00 AM MOVING AUCTION Saturday, June 20 @ 10:00 AM (Alternate date in case of weather cancellation is Sunday, June 21 @ 12:00 Noon) Owners: Karl & Sue Venneberg Location: 800 79 th Ave NE, Bismarck, ND Directions:

More information

SALE LISTING of HAND TOOLS etc

SALE LISTING of HAND TOOLS etc Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 26 th May 2018 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery and

More information

TC Industrial Tooling Cabinet

TC Industrial Tooling Cabinet TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity

More information

H.J. Pugh & Co. AUCTIONEERS. LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of

H.J. Pugh & Co. AUCTIONEERS. LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of H.J. Pugh & Co. AUCTIONEERS LEDBURY SALEROOMS MARKET STREET, LEDBURY, HEREFORDSHIRE (M50 junction 2 4 miles) The collective sale of SEASONED AND GREEN SAWN TIMBER, COLLECTABLE WOODWORKING & ENGINEERING

More information

SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3

SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3 SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3 : Weight: 239 kg. Qty JET.8GM3 1 JET+ 8-drawer roller cabinets - 3 modules per drawer JET.C4GM3 1 JET+ 4-drawer chest - 3 modules per

More information

BIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)

BIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818) This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty. Description

More information

Singla Steels. https://www.indiamart.com/singlasteels/

Singla Steels. https://www.indiamart.com/singlasteels/ +91-8071677322 Singla Steels https://www.indiamart.com/singlasteels/ We are the leading Manufacturer, Exporter and Supplier of all types of Hand Tools. All our products are known for their precise design,

More information

ASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?

ASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails? ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through

More information

CT Box and Pan Brake User Manual

CT Box and Pan Brake User Manual CT153 12 Box and Pan Brake User Manual Important Safety Precautions Plead read all the instructions before using this tool. 1) Always keep your work area clean. Cluttered areas invite injuries. 2) Do not

More information

BSC Industrial Storage Cabinet

BSC Industrial Storage Cabinet BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W

More information

FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R

FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK

More information

ITB-48 - Industrial Tool Box (48") 2 x Gas Struts

ITB-48 - Industrial Tool Box (48) 2 x Gas Struts ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett

More information

WASSCE / WAEC FURNITURE MAKING SYLLABUS

WASSCE / WAEC FURNITURE MAKING SYLLABUS WASSCE / WAEC FURNITURE MAKING SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. SCHEME

More information

+91-8048763622 Southern Hardware Private Limited http://www.southerntoolshardware.com/ We are the authorised Distributor of TORKOSCAR & BETA Italy. We also import torque tools, pneumatic hand tools, precision

More information

KIT DAD OUT FOR THE SEASON

KIT DAD OUT FOR THE SEASON ON SALE 1st Aug - 31st Oct 14 KIT DAD OUT FOR THE SEASON 213PC TOOL KIT 6 Drawer Toolchest with BBS Multiple inserts for organised tools 30PC Hexagon Key AF 24PC Comb Spanner 54PC Bit PC ¼ & 3/8 DR Socket

More information

.com. More than a machine. Power your life. Operating Manual

.com. More than a machine. Power your life. Operating Manual Operating Manual www.maxnovomachine +86-514-87892928 info@maxnovomachine Dear Customer, Thank you very much for purchasing a product made by MAXNOVO MACHINE. Our machines offer a maximum of quality, technical

More information

Tools Auction - Galt- May 11

Tools Auction - Galt- May 11 s Auction - Galt- May 11 Auction Opens: Fri, May 4 12:09pm PT Auction Closes: Fri, May 11 10:00am PT GA11240 GA7000 GA7001 GA7002 GA7003 GA7004 GA7006 GA7007 GA7008 GA7009 GA7010 GA7011 GA7012 GA7013 GA7014

More information

Tool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score.

Tool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score. Tool ID Purpose: To develop the student s ability to correctly identify the names and uses of a variety of tools commonly used in the agricultural industry. Team Score Format: A team shall be comprised

More information

TCW Industrial Tooling Cabinet

TCW Industrial Tooling Cabinet TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum

More information

Support@Powrkraft.com 8ga. @ 0ft, 6ga. @ 50ft, ga @ 00ft, 0ga @ 00ft 3-6 Model Number Motor Diameter* 65556 500W 0 Volt 0 / Most Wood 0 4 ton 30 PSI 3.7 qt. 37 0 97 lb. 6 0W (-3 ISO Viscosity) Hydraulic

More information

Owner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.

Owner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts. Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.

More information

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7 TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...

More information

IWB-40 - Industrial Work Bench

IWB-40 - Industrial Work Bench IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load

More information

SSB-18WS - Stainless Steel Work Bench

SSB-18WS - Stainless Steel Work Bench SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):

More information

Product Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)

Product Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08) ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER

More information

A Page No. 1. Electrode Drying oven thermostatically controlled temperature C

A Page No. 1. Electrode Drying oven thermostatically controlled temperature C A Page No. 1 Package No 1. : Machinery of Welding, Sr. Name of Item Rate to be quoted by tenderer (in rupees) along with specification and make Electrode Drying oven thermostatically controlled temperature

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

B.E Mini Projects

B.E Mini Projects B.E Mini Projects 2017-2018 S.NO CMP001 CMP002 CMP003 CMP004 CMP005 CMP006 CMP007 CMP008 CMP009 CMP010 CMP011 CMP012 CMP013 CMP014 CMP015 CMP016 CMP017 CMP018 CMP019 CMP020 CMP021 CMP022 CMP023 CMP024

More information

RYEDALE AUCTIONEERS. Outdoor Sale. Saturday 10 th March 2018

RYEDALE AUCTIONEERS. Outdoor Sale. Saturday 10 th March 2018 RYEDALE AUCTIONEERS Outdoor Sale Saturday 10 th March 2018 1 Metal wheelbarrow 2 Small metal porters trolley 3 Set of three pale pots and a twin handled lidded glazed pot 4 Set of drain rods 5 Set of metal

More information

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602 596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for

More information

SFWW Quality Tool Sale

SFWW Quality Tool Sale SFWW Quality Tool Sale SFWW has been commissioned by Dave Coole, a former celebrated senior engineer and toolmaker at the prestigious Royal Aircraft Establishment in Farnborough. David joined the RAE as

More information

IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity

IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x

More information

ITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL

ITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL CHAPTER 82 NOTES: TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure of pedicure

More information

192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme

192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme 192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme This is a trade related course The examination will comprise two papers. 192-1 Paper I: Section A. This paper comprises two sections: (A and B)

More information

Diesel Pile Hammer D30-32 Part # 66508

Diesel Pile Hammer D30-32 Part # 66508 Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner

More information

HENKELS: Estate Auction

HENKELS: Estate Auction HENKELS: Estate Auction Sale Results LOT# LEAD/DESCRIPTION 1 Colt Woodsman 2nd series 22 cal MFG 1950 SER #137214-S $1,650.00 2 RUGER Mark 1 Target 22 cal SER# 12-50331 $275.00 3 Single Six Convertible

More information

CONSTRUCT YOUR DREAMS WITH HIGH QUALITY MATERIALS

CONSTRUCT YOUR DREAMS WITH HIGH QUALITY MATERIALS www.tenbek.com CONSTRUCT YOUR DREAMS WITH HIGH QUALITY MATERIALS CONSTRUCTION MATERIALS FASTERNERS ELECTRICAL HAND TOOLS PPE WE DEAL WITH Building Materials Facilities Management Waste Management Real

More information

00108/00110 INSTRUCTION MANUAL

00108/00110 INSTRUCTION MANUAL 00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Please Read this Instruction Booklet prior to assembly of your Rock Tamer Kit. IMPORTANT! Exhaust Systems Note: Any modifications

More information

April 2018 Edition STANDARD DUTY

April 2018 Edition STANDARD DUTY April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary

More information

Furrow Auction Company

Furrow Auction Company Furrow Auction Company Absolute Auction Hodges Machine Shop and Tool Repair Total Liquidation of 50 year old Hodges Machine Shop and Tool Repair Company specializing in Hydraulic Cylinder Repair 145 Riverview

More information

Repair manual. Fifth-wheel coupling JSK 38/50

Repair manual. Fifth-wheel coupling JSK 38/50 Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/212 1 Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety requirements and must

More information

Royal Corporation, Chennai

Royal Corporation, Chennai +91-8071676709 Royal Corporation, Chennai https://www.indiamart.com/royalcorporation/ We are the trader of measuring instruments, cutting tools, lifting tools and magnetic tools. All our products find

More information

Installation Manual Roof Zone Ladder Rack

Installation Manual Roof Zone Ladder Rack Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32

More information

FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams

FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams Copyright 2009 Dekalam Hire Learning Incorporated TOOLS Hammers Hammers are instruments used for pounding. For the most part they serve

More information

WORKSHOP FURNITURE. Rugged, Heavy Duty, Quality Steel Construction. Optional drawer. Lower shelf same length as worktop

WORKSHOP FURNITURE. Rugged, Heavy Duty, Quality Steel Construction. Optional drawer. Lower shelf same length as worktop Designed For Todays Technical Workspace Environment Rugged, Heavy Duty, Quality Steel Construction Bench tops are 29" deep, not 24" as with most common benches Superb powder coat finish Modern design Optional

More information

LOT QTY DESCRIPTION NOTE 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC

LOT QTY DESCRIPTION NOTE 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC 1 CONTENTS LOFT OFFICE INCLUDING P.C, DESKS, CHAIRS, ETC 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC 3 TURNED TIMBER BALUSTRADE, METAL BALUSTRADE & TIMBER STOCKS 4

More information

*0600/401* 0600/401. CRAFT AND DESIGN STANDARD GRADE Foundation Level. Fill in these boxes and read what is printed below. Full name of centre

*0600/401* 0600/401. CRAFT AND DESIGN STANDARD GRADE Foundation Level. Fill in these boxes and read what is printed below. Full name of centre FOR OFFICIAL USE F 6/4 NATIONAL QUALIFICATIONS 29 MONDAY, 8 MAY 9. AM. AM Total CRAFT AND DESIGN STANDARD GRADE Foundation Level Fill in these boxes and read what is printed below. Full name of centre

More information

EVOLVE TOOL CHEST 7 DRAWER

EVOLVE TOOL CHEST 7 DRAWER ALL PRICES INCLUDE GST OFFER VALID UNTIL 31/10/2015 Offer available in Australia only. APPRENTICES ONLY! 999 00 214 PCE EVOLVE TOOL KIT Part No. P1400 EVOLVE TOOL CHEST 7 DRAWER 666 x 410 x 475mm 93 Piece

More information

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7 TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...

More information

KNEEWALL APPLICATION

KNEEWALL APPLICATION INSTALLATION SUGGESTIONS KNEEWALL APPLICATION LIMITED WARRANTY L.J. Smith, Inc. issues the following Limited Warranty: The product(s) furnished hereunder are warranted to be free from defects in material

More information

Fifth-wheel coupling JSK 38/50

Fifth-wheel coupling JSK 38/50 Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/25 1 LT SK38C-3 English RevA Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety

More information

BUMP GATE FITTING INSTRUCTIONS.

BUMP GATE FITTING INSTRUCTIONS. 1 BUMP GATE FITTING INSTRUCTIONS. HEAVY DUTY MODEL FOR STEEL POSTS. Hinge post Lock post Bump arms Two-way lock Thank you for purchasing a Bump Gate. This device will provide you with many years of good

More information

Skills. Pupil Homework Name :- Lesmahagow High School Technical Department. Homework Name the tool shown opposite.

Skills. Pupil Homework Name :- Lesmahagow High School Technical Department. Homework Name the tool shown opposite. Homework 27 1. Name the tool shown opposite. (Page 38) (1) Lesmahagow High School Technical Department 2. Name the tool shown opposite. (Page 39) (1) Practical Woodworking 3. Name the tool shown opposite.

More information

Penrith Farmers' & Kidd's PLC

Penrith Farmers' & Kidd's PLC Penrith Farmers' & Kidd's PLC Tools and Machinery Started Dec 23, 2016 9:30am GMT The Skirsgill Saleroom Skirsgill Penrith, Cumbria CA11 0DN United Kingdom Lot Description 1 Moore & Wright adjustable micrometer

More information

Architecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total

Architecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total Architecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total 2ft. Level 3 $7.00 $21.00 4ft. Level 2 $14.00 $28.00 Pipe Rack 2 $300.00 $600.00 Adjustable Pipe

More information

TRIVIA TRADE 50 (PTY) LTD AUCTION DATE: MONDAY, 22 ND 10:30 VENUE: KIARA HOUSE, 27 3RD STREET, MONTAGUE GARDENS

TRIVIA TRADE 50 (PTY) LTD AUCTION DATE: MONDAY, 22 ND 10:30 VENUE: KIARA HOUSE, 27 3RD STREET, MONTAGUE GARDENS TRIVIA TRADE 50 (PTY) LTD AUCTION DATE: MONDAY, 22 ND SEPTEMBER @ 10:30 VENUE: KIARA HOUSE, 27 3RD STREET, MONTAGUE GARDENS MOVABLES TERMS: R 5 000.00 Bank guaranteed cheque or EFT to register as well

More information

Installation Instructions Kit, Base Rail Bracket Part # 31413

Installation Instructions Kit, Base Rail Bracket Part # 31413 Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating

More information

Precision Split Parts Manual

Precision Split Parts Manual Precision Split Parts Manual Models 9700 7-Ton Log Splitter 9700 -Ton Log Splitter 086000B /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with

More information

Precision Split Parts Manual

Precision Split Parts Manual Precision Split Parts Manual Model 917001 7-Ton Log Splitter 0860400 /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents

More information

College of Forestry 610: Power Tools

College of Forestry 610: Power Tools College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide

More information

- INSTALLATION INSTRUCTIONS -

- INSTALLATION INSTRUCTIONS - . Supercharger Shaft Upgrade Kit PART# - RY17040-UK-6S5-2 APPLICATION(S): Yamaha FX-SHO, FZR & FZS Required tools Part# IN LB Electronic Torque Wrench N/A T-30 Torx Bit Socket N/A 3mm Allen Wrench N/A

More information

AUT 107 Mechanical Systems I 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name

AUT 107 Mechanical Systems I 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name Student s Signature Completion Date High School Teacher s Signature Recommended Grade High School COCC

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

Tools Hand and Power. OSHA Office of Training and Education 1

Tools Hand and Power. OSHA Office of Training and Education 1 Tools Hand and Power 1 Hazards Workers using hand and power tools may be exposed to these hazards: objects that fall, fly, are abrasive, or splash harmful dusts, fumes, mists, vapors, and gases frayed

More information

1-CYLINDER TORNADO LIFT INSTALLATION MANUAL

1-CYLINDER TORNADO LIFT INSTALLATION MANUAL 1-CYLINDER TORNADO LIFT INSTALLATION MANUAL Model: TORNADO LIFT 2K 2018 Edition PROVIDED FOR ASSEMBLY Foot Pads 12 sq. Square Tube Legs (optional) Cross Beams Side Beams 2.5 Dia. Cylinders (with hoses

More information

NOTICE INVITING QUOTATIONS. Description : Equipment for Engineering Workshop in Mechanical Engg. Department. NIQ No : RGUKT-B/Proc/ME/EWS/Q03/2019

NOTICE INVITING QUOTATIONS. Description : Equipment for Engineering Workshop in Mechanical Engg. Department. NIQ No : RGUKT-B/Proc/ME/EWS/Q03/2019 RAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES Basar, Nirmal District Constituted under the Act 18 of 2008 Ref: RGUKT-B/Proc/ME/EWS/Q03/2019, dated.07.02.2019 NOTICE INVITING QUOTATIONS Description

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

INSTALLATION SUGGESTIONS LEVEL APPLICATION LIMITED WARRANTY

INSTALLATION SUGGESTIONS LEVEL APPLICATION LIMITED WARRANTY INSTALLATION SUGGESTIONS LEVEL APPLICATION LIMITED WARRANTY L.J. Smith, Inc. issues the following Limited Warranty: The product(s) furnished hereunder are warranted to be free from defects in material

More information

Laudiston Valuers & Auctioneer SALE: 752S DATE: 28 March 2012 at 10:00AM SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD

Laudiston Valuers & Auctioneer SALE: 752S DATE: 28 March 2012 at 10:00AM SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD _ 2 QUANTITY OF MEASURING INSIDE & OUTSIDE CALIPERS 3 VERNIER CALIPER - SME 4 DIAL CALIPER - NSK 5 VERNIER CALIPER 6 VERNIER CALIPER 7 OUTSIDE MICROMETER

More information

.com. More than a machine. Power your life. Operating Manual

.com. More than a machine. Power your life. Operating Manual Operating Manual Dear Customer, Thank you very much for purchasing a product made by MAXNOVO MACHINE. Our machines offer a maximum of quality, technical good solutions and convince by an outstanding price

More information

1. List or sketch five entirely different forms in which METAL can be supplied to the school workshop.

1. List or sketch five entirely different forms in which METAL can be supplied to the school workshop. Homework 1 - Metals 1&2 1. List or sketch five entirely different forms in which METAL can be supplied to the school workshop. 2. Metals are usually classified as Ferrous and Non-ferrous. Explain what

More information