LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS

Transcription

1 Thank you for purchasing the LOIRE 3 OOR MIRRORE WARROBE. Please read the instructions carefully to ensure safe operation of the product. 195 x 550 x 000 ()/WITE PLEASE REA this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. o not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly. CAUTION: There are small components used in the construction of this unit. These loose items should be kept away from young children whilst assembling your unit to avoid the danger of choking hazards. Tools Required Phillip Screwdriver Allen Key Page 01 of 13

2 IMPORTANT - REA CAREFULLY - RETAIN TESE INSTRUCTIONS FOR FUTURE REFERENCE. INFORMATION ue to the size of this product we recommend that it is assembled in the room intended for use. When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly. Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to prevent it from scratching. Check the pack and make sure you have all the parts listed. Ensure that this product is fully assembled as illustrated before use. Check all screws or bolts are tightened and inspect regularly. Tools not included. WARNINS This product should only be used on firm, level ground. Keep small parts out of reach of children. Make sure the legs remain in contact with the ground. o not use power tools to construct this product. o not tighten screws until fully assembled. o not over tighten screws or bolts. o not use this product if parts are missing, damaged or worn. o not sit or stand on the product. If a glass component is chipped or broken, stop using the product and consult the manufacturer or supplier. o not strike the glass with hard or pointed items. We recommend the use of the wall strap provided for safety reasons. N.B. If in doubt please consult a qualified tradesperson. Warning: Always ensure the area to be drilled is free from hidden electrical wires, water and gas pipes. It is essential that this unit is fixed to a wall with the fixings provided. CARE INFORMATION Never use scourers, abrasives or chemical cleaners. To clean wipe with a sponge and warm soapy water. o not use solvent based cleaners or detergents as they can bleach or damage the product. When cleaning glass panels or mirrors use a damp cloth with washing up liquid or soft soap if necessary; do not use washing powders or any other substances containing abrasives since these substances scratch glass. Page 0 of 13

3 Parts and Fittings Checklist Please check the pack contents before assembling this product. If any components are missing, please contact your retailer. The fittings pack contains small items that should be kept away from small children. 1.Top panel (1 pc) 3. Right side panel (1 pc) 4. ivider (1pc) 5. Shelf panel (pcs) (1pc) (1pc) 8. Back panel (1pc) 9. Back panel (pcs) 11. Legs (4pcs) 1.Support rail (1pc) 13. Support rail (1pc). Support rail (1pc). Support rail (1pc). Support rail (pcs) 17. anging rail (1pc) 19. Right door (1pc) 0. Mid door (1pc) 1. Shelf panel (1pc). Shelf panel (1pc) Page 03 of 13

4 Fittings Code Item Quantity A Bolt ( M6 x 35mm ) B C Bolt ( M6 x 55mm ) Bolt ( M6 x 60mm ) Wood owel ( M8 x 30mm ) E Bolt ( M4 x 5mm ) 3 F Screw ( M3 x mm ) 7 Cam Bolt ( M7 x 35mm ) I J K Cam ( 10mm x 13mm ) 4mm Allen Key Spring Washer ( 1.5mm x 10mm ) Flat Washer ( mm x 19mm ) L Knob 3 M N O P Q Support Pin ( M7 x 1mm ) Rawl Plug ( M8 x 30mm ) Wall Screw ( M3 x 30mm ) Screw ( M3 x mm ) eneral ints and Tips the Cam Bolt. Once the Cam Bolt is inserted into the Cam, turn 180 secure. Page 04 of 13

5 STEP 1 PARTS REQUIRE Right side panel x 1. Cam Bolt x 1 STEP PARTS REQUIRE 1. Support rail x Support rail x 1. Support rail x 1. Support rail x 1. Support rail x 13. Wood dowel x 18. Cam bolt x 1 Page 05 of 13

6 STEP 3 PARTS REQUIRE 4. ivider x 1 1. Support rail x 1. Support rail x 1 4. Wood dowel x 3. Cam x 1 STEP 4 A PARTS REQUIRE 13. Support rail x 1. Support rail x 1 A 4 A. Bolt x Allen key x Page 06 of 13

7 STEP 5 PARTS REQUIRE 3. Right side panel x Wood dowel x. Cam x STEP 6 PARTS REQUIRE 8. Back panel x Page 07 of 13

8 STEP 7 PARTS REQUIRE. Support rail x A A A. Bolt x. Cam x I. Allen key x 1 STEP 8 PARTS REQUIRE 9. Back panel x 9 9 Page 08 of 13

9 STEP 9 PARTS REQUIRE Cam x 6 STEP 10 PARTS REQUIRE 1. Top x 1 3 A. Bolt x 10 I. Allen key x 1 A 1 Page 09 of 13

10 STEP X4 11 PARTS REQUIRE Leg x 4 B J K I B. Bolt x 8 J. Spring washer x 8 K. Flat washer x 8 I. Allen key x 1 STEP 1 PARTS REQUIRE * Frame C. Bolt x 10 I. Allen key x X10 C I Page 10 of 13

11 STEP 13 PARTS REQUIRE anging rail x Right door x 1 0. Mid door x F. Screw x 7 F X9 STEP PARTS REQUIRE. Shelf panel x 1 M E. Bolt x 3 L. Knob x 3 M. Support pin x 4 7 E L Insert the shelf support pins into the predrilled holes suitable for the desired shelf height. Page 11 of 13

12 STEP PARTS REQUIRE 5. Shelf panel x 5 1. Shelf panel x M M. Support pin x 1 Insert the shelf support pins into the predrilled holes suitable for the desired shelf height. STEP PARTS REQUIRE P O N. Rawl plug x O. Wall screw x P. Screw x P O N Q N Q wall Always ensure the area to be drilled is free from hidden electrical wires, water and gas pipes. Page 1 of 13

13 COMPLETE Page 13 of 13