SQ # Hardware Supplies RESULTS
|
|
- Oswin Cox
- 5 years ago
- Views:
Transcription
1 BOARD APPROVED 1 Adhesive 3M Super77 Multipurpose oz each 24 2 Adhesive, Bonding, Milk, Gallon each 10 3 Adhesive, PL 200, 10 oz/tube each 50 4 Alcohol, Gallon each 10 5 Anchor, Plastic, 3/8 x 1", Nylon, Zipit Powers Fasteners 100/box #2345 box 30 6 Anchor, Plastic, Kit, for #10 Screws, Screws/Bit Included each 50 7 Anchor, Zinc, 3/8x1 Zip It Power Fasteners 100/box #2346 box 5 8 Bags, Filter, Porter Cable, item # (3 Bags Per Package) pkg 50 9 Bags, Replacement paper filter bags, Dewalt #DWV9401, 5/pkg pkg Bantam Plug, Plastic - 1/4" # /box box Bantam Plug, Plastic - 3/16" # /box box Battery, Duracell, "AA" each Battery, Duracell, "AAA" each Battery, Duracell, "C" each Battery, Duracell, "D" each Battery, Duracell, 9-Volt each Belt, Replacement, Belt Sander, 3" x 21", Coarse, item # United Abrasives Belt, Replacement, Belt Sander, 3" x 21", Fine, item # United Abrasives each 25 each Belt, Replacement, Belt Sander, 3" x 21", Medium, item # each 25 Max Brown, Carteret NJ $9.75 $ $18.80 $ $1.65 $82.50 $8.10 $81.00 $12.95 $ $5.95 $ $14.35 $71.75 $17.35 $ $12.65 $ $2.30 $23.00 $2.10 $21.00 $0.45 $ $0.45 $45.00 $0.87 $87.00 $0.90 $90.00 $1.60 $80.00 $1.60 $40.00 $1.45 $36.25 $1.50 $37.50 Page 1 of 12
2 20 Belt, V, item # 4L-310 each Belt, V, item # 4L-430 each Belt, V, item # B-100 each Belt, V, item # B-112 each Belt, V, item # B-94 each Belt, V, item # BP-86 each Bit, Drill, 1/4", High Speed each Bit, Drill, 1/2" High Speed each Bit, Drill, 1/8", High Speed each Bit, Drill, 3/16", High Speed each Bit, Drill, 3/8", High Speed each Bit, Drill, 5/16", High Speed each Bit, Drill 7/16" High Speed each Bit, Masonry, 1/2" each Bit, Masonry, 1/4" each Bit, Masonry, 1/8" each Bit, Masonry, 3/4" each Bit, Masonry, 3/8" each Bit, Masonry, 5/16" each Bit, Masonry, 5/8" each 50 $3.75 $37.50 $4.65 $46.50 $18.60 $ $20.95 $ $17.65 $ $16.10 $ $1.20 $60.00 $4.30 $ $0.55 $27.50 $0.80 $40.00 $2.65 $ $1.80 $90.00 $3.45 $86.25 $2.25 $ $1.50 $75.00 $0.73 $36.50 $4.40 $ $2.00 $ $1.75 $87.50 $3.50 $ Page 2 of 12
3 40 Bit, Masonry, SDS, 1/2" x 6" each Bit, Masonry, SDS, 1/4" x 6" each Bit, Masonry, SDS, 3/16" x 6" each Bit, Masonry, SDS, 3/8" x 6" each Bit, Masonry, SDS, 5/16" x 6" each Bit tip holder, magnetic 1/4" hex Milwaukee # /8 length, no substitutions each 5 46 Blade Cutters, 12/box box 5 47 Blade, Bosch, Jigsaw, Metal, T118A-Basic Metal, T-Shank, No Substitutes each Blade, Bosch, Jigsaw, Wood, T101AO-Scroll Cut, T-shank, No Substitutes each Blade, Bosch, Jigsaw, Wood, T101BR-Reverse Cut, T-Shank, No Substitutes each Blade, Bosch, Jigsaw, Wood, T101D-Course, T-Shank, No Substitutes each Blade, Freud, 10", Tripple Chip Grid, LU82M010, No Substitutes each Blade, Hacksaw, Saw, Lenox, 24 Tooth, 12" Long, item # 224 HE each Blade, Hacksaw, Saw, Lenox, 32 Tooth, 12" Long, item # 232 HE each Blade, Radial Arm Saw, Dewalt, 12", 80 Tooth, item # DW3232PT each 5 55 Blade, Sawsall, Lenox, item # B110R-10/14T, No Substitutes each Blade, Sawsall, Lenox, item # 606R-6T, No Substitutes each Blade, Sawsall, Lenox, item # 636RP-6T, No Substitutes each Blade, Sawsall, Lenox, item # 676RC-6T, No Substitutes each Blade, Sawzall, Lenox, item # B110R, No Substitutes each 100 $4.75 $ $3.10 $ $2.75 $ $4.20 $ $3.75 $ $3.60 $18.00 $5.95 $29.75 $0.90 $90.00 $0.77 $77.00 $1.10 $ $0.98 $98.00 $42.00 $ $1.27 $63.50 $1.27 $63.50 $80.00 $ $3.73 $ $1.92 $ $2.55 $ $2.90 $ $3.73 $ Page 3 of 12
4 60 Blade, Sawzall, Lenox, item # B618R, No Substitutes each Blade, Sawzall, Lenox, item # B818R, No Substitutes each Blade, Utility Knife, Stanley, item # A, 100/box box Blades, Scraper, 4", 100/pkg pkg Bracket, Shelf, 10", item # 180BR10 (Brass, white, black) each Bracket, Shelf, 12", item # 180BR12 (Brass, white, black) each Brush Wire, Stainless Steel each Brushes, Acid gross 5 68 Brushes, Chip, 1" each Brushes, Chip, 2" each Brushes, Chip, 3" each Bungee Cords, 41" each Cartridges, Dust, 3M Respirator models 6200 and 7091, R2091 2/pkg pkg Cartridges, Vapor, 3M Respirator model 6001, 2/pkg pkg Cartridges, Vapor, 3M, Respirator models 6001 and 6200, 2/pkg pkg Caulk, Phenoseal, 10 oz 12 each per case case Caulk, Silicone, G.E., Tube, item # each per case case Chair Brace, Stanley #120, Zinc Plated #S No Substitutions each Chain, Sash, item # 8A, 100'/roll each 5 79 Chalk, Blue For Chalk Boxes, marking Ultra Fine Keson 5lb Container each 10 $1.92 $ $2.46 $ $11.25 $ $28.50 $1, $1.30 $ $1.45 $ $3.70 $74.00 $19.75 $98.75 $0.25 $ $0.40 $ $0.60 $ $1.85 $74.00 $5.30 $ $8.50 $ $8.50 $ $38.40 $ $36.00 $ $0.75 $18.75 $31.00 $ $5.60 $56.00 Page 4 of 12
5 80 Circular Saw Blades, Unicut, Carbide Tipped 6"x24 Tooth each Circular Saw Blades, Unicut, Carbide Tipped, 7 1/4", 24 tooth each Clear Polyethylene, Husky, Sheeting, 20' x 100', 4 mil, 1/2", Item #CFO420C each Cold Patch, Sakrete 50 lbs/bag each Compound, Sweeping, 170lb/drum each 2 85 Drill Bit, Jobber, 1/16",High Speed Steel each Drill Bit, Jobber, 5/32", High Speed Steel each Drill Bit, Jobber, 7/32", High Speed Steel each Drill Bit, Jobber, 7/64", High Speed Steel each Drill Bit, Jobber, 11/64", High Speed Steel each Drill Bit, Jobber, 3/32", High Speed Steel each Drill Bit, Jobber, 5/64", High Speed Steel each Drill Bit, Jobber, 7/16", High Speed Steel each Drill Bit, Jobber, 9/32", High Speed Steel each Drill Bit, Jobber, 9/64", High Speed Steel each Drill Tip, Phillips Head 1/4", #1 #2 #3 each Drill Tip, Square Head Recess bit, 1/4" Hex Insert Bit, #0, #1, #2, #3 each Drill Tip, Straight Head 1/4", #1 #2 #3 each Drill Tip, Torx Head, 1/4" Hex Insert bit, #05, #10, #15, #20, #25 each Drill Tip, Torx Head, 1/4" Hex Insert Bit, Tamper Proof #10, #15, #20, #25 each 100 $5.95 $ $6.95 $ $46.50 $ $11.75 $ $43.50 $87.00 $0.50 $5.00 $0.63 $6.30 $0.96 $9.60 $0.50 $5.00 $0.70 $7.00 $0.50 $5.00 $0.50 $5.00 $3.60 $36.00 $1.60 $16.00 $0.60 $6.00 $1.50 $75.00 $1.50 $ $3.45 $ $5.95 $ $6.90 $ Page 5 of 12
6 100 Drop Cloth, Canvas, 48" x 12' each Drop Cloth, Canvas, 9' x 12' each Extension Blocks, 2' each Extension Blocks, 2', with GFI each Extension Cord, 25', 12-3 each Extension Cord, 50', 12-3 each Flag, US Annin 8' x 12' Nylon #2320 each Flag, Middlesex County, 4' x 6' Nyl-Glo # each Foam, Expansion, 12 oz/can, small gap each Gasket, Permatex, Foam-A, No. 02, 11oz/tube, item # each Gloves, Jersey, 100% Cotton, Brown, item # doz Gloves, Leather, Palm doz Gloves, Pig Grain, Leather, Drivers, item # doz Gloves, Rubber, with Palm Grip, item # J1027RF doz Gloves, Vinyl, Disposable, 100/box box Gloves, Blue Rubber Dipped doz Glue, Carpenters, Wood, Gallon each Gun, Caulking, Hyde, item # each Hooks, Coat, Brass Plated, item # each Hydraulic Thread Sealer, Permatex, Hi Pressure, 6 ml, #59214 each 3 $6.95 $69.50 $14.50 $ $5.25 $52.50 $20.00 $ $15.40 $ $23.00 $ $ $ $ $ $3.60 $ $6.80 $68.00 $6.95 $ $24.00 $2, $60.00 $2, $23.50 $ $3.75 $15.00 $7.95 $95.40 $17.45 $ $6.95 $ $0.60 $ $5.15 $15.45 Page 6 of 12
7 120 Knife, Putty, 1 1/4", Red Devil each Knife, Spackle, 2" each Knife, Utility, Retractable, 6" each Light, Halogen, 500 Watt each Light Kit, Mini Mag Lite, Pro LED, 2-Cell AA Includes Holster & Batteries each Light, Mag-Lite 2-D Cell each Liquid Nails, PL 200, 10 oz/tube 12 Per Case case Lok-Bolt, Carbon Steel Hex Nut - 1/2" x 2 1/4", #5025 each Lok-Bolt, Carbon Steel Hex Nut - 1/2" x 4", #5034 each Lok-Bolt, Carbon Steel Hex Nut - 3/4" x 1 7/8", #5015 each Lok-Bolt, Carbon Steel Hex Nut - 3/4" x 3", #5020 each Mask, Dust, 3M, item # , 20/box box Nailin Mushroom Head Zamac w/carbon Steel Nail 1/4" x 1 1/4"100/box #2814 box Nailin Round Head Nylon w/carbon Steel Nail 1/4" x 1 1/2"100/box #2541 box Nailin Round Head Nyon w/carbon Steel Nail 1/4" x 1"100/box #2521 box Nails, Brad, 1 1/4", 18 ga, Porter Cable, 5,000/box, item # BN18125 box Nails, Brad, 1-1/2" x 16 lb Nails, Brad, 2", 18 ga, Porter Cable, 5,000/box, item # BN18200 box Never-Seez, Brush Top, 8oz/can, item # NSBT8 can Pail, Paint, 9", Plastic, 5 qt each 40 $1.95 $39.00 $2.95 $59.00 $3.85 $ $10.95 $ $24.50 $ $23.60 $ $1.75 $52.50 $0.46 $ $0.63 $ $0.27 $ $0.33 $ $15.35 $ $9.10 $45.50 $12.80 $64.00 $8.75 $43.75 $10.80 $ $12.40 $62.00 $15.00 $ $11.20 $ $1.75 $70.00 Page 7 of 12
8 140 Patch Bag, 25lb/bag web patch for floor repair each Patch, Fix Wood 4oz/Can plastic wood neutral each Plaster of Paris, 8 lb/bag each Plastic, Clear, Rolls, 20' x 100', 4 mil each Plexiglas, Sheets, 1/4" x 4' x 8' each Plexiglas, Sheets, 1/8" x 4' x 8' each Plug, Plastic, # 8-10, 100/case case Plug, Plastic, #10-#12, 100/case case Polyethylene Sheeting, Berry Plastic Corp. 10' x 50', 4 mil, 1/2", Item # each Power Bolt, Carbon Steel Hex Head 1/4" x 1 3/4", #6902 each Power Bolt, Carbon Steel Hex Head 1/4" x 3", #6906 each Power Bolt, Carbon Steel Hex Head, 3/8" x 3 1/2", #6914 each Power Bolt, Carbon Steel Hex Head, 1/2" x 2 3/4", #6930 each Power Bolt, Carbon Steel Hex Head, 1/2" x 4 3/4", #6934 each Power Bolt, Carbon Steel Hex Head, 3/8" x 2 1/4", #6910 each Quick Plug, UGL, 5 Gallons each Rags, Cloth lb Rags, White, Painter's lb Router Bit, Bosch, Flush Trimming, 3 Flutes Laminate, #85216m, No Substitutes each Sandpaper, Belt 6x48 50 Grit AOX United Abrasives #63253 each 25 $25.00 $ $2.50 $ $5.75 $ $46.40 $ $ $1, $59.00 $ $2.00 $60.00 $2.50 $75.00 $17.80 $ $1.35 $ $1.99 $ $2.14 $1, $2.54 $1, $3.52 $1, $1.82 $ $52.00 $1, $0.85 $ $1.25 $ $15.25 $ $5.55 $ Page 8 of 12
9 160 Sandpaper, 12" Sanding Pad, Peel & Stick 80 Grit United Abrasives #35169 each Sandpaper, Norton, Coarse, 50 Grit, Aluminum Oxide each Sandpaper, Norton, Extra Fine, 220 Grit, Aluminum Oxide each Sandpaper, Norton, Fine, 120 Grit, Aluminum Oxide each Sandpaper, Norton, Medium, 80 Grit, Aluminum Oxide each Sandpaper, Paper Discs 5", 3S Hook And Loop 80X A/O W/5 Vac Holes United Abrasives # Sandpaper, Paper Discs 5" 3S Hook & Loop 100CA/O W/5 Vac Holes United Abrasives # Sandpaper, Paper Discs 5" 3S Hook & Loop 80C W/8 Vac Holes United Abrasive # Sandpaper, Paper Disc 5" 3S Hook & Loop 100C W/8 Vac Holes United Abrasive # Sanding Pads/Porter Cable 8-7/8" Med Grit 100, 5 Foamed Backed Pads, Item #77105 each 50 each 50 each 50 each 50 box Sandpaper, Wet/Dry, 80 Grit each Sandpaper, Wet/Dry, 100 Grit each Sandpaper, Wet/Dry, 220 Grit each Sandpaper, Wet/Dry, 320 Grit each Sandpaper, Wet/Dry, 400 Grit each Sandpaper, Wet/Dry, 500 Grit each Scraper, Floor, Heavy Duty each Screen, Aluminum, 36" x 100'/roll each Screen, Fiberglass, 36" x 100'/Roll roll Screws, Phillips Pan Head, #6 x 3/4" each 100 $4.82 $ $0.67 $67.00 $0.33 $33.00 $0.43 $43.00 $0.51 $51.00 $0.41 $20.50 $0.39 $19.50 $0.40 $20.00 $0.40 $20.00 $35.73 $ $0.40 $40.00 $0.37 $37.00 $0.37 $37.00 $0.37 $37.00 $0.37 $37.00 $0.37 $37.00 $15.50 $ $75.00 $ $47.20 $ $0.03 $3.00 Page 9 of 12
10 180 Screws, Phillips Pan Head, #6 x 1" each Screws,Phillips Pan Head # 6 x 1 1/4" each Screws, Phillips Pan Head, #6 x 1 1/2" each Screws, Phillips Pan Head # 6 x 2" each Screws, Phillips Pan Head, #8 x 3/4" each Screws, Phillips Pan Head, #8 x 1" each Screws, Phillips Pan Head, #8 x 1 1/4" each Screws, Phillips Pan Head, #8 x 1 1/2" each Screws, Phillips Pan Head, # 8 x 2" each Screws, Phillips Pan Head, #8 x 2 1/2" each Screws, Phillips Pan Head, #10 x 3/4" each Screws, Phillips Pan Head, #10 x 1" each Screws, Phillips Pan Head, # 10 x 1 1/4" each Screws, Phillips Pan Head, # 10 x 1 1/2" each Screws, Phillips Pan Head, # 10 x 2" each Shrink Wrap,.08 mill x 18" x 1500', 4/box box Snips, Straight, Weiss each Speedy Dry, 50 lb/bag each Squeegees, Curved, 36", with Handle each Staples Arrow T-50 1/4" # /box box 5 $0.03 $3.00 $0.03 $30.00 $0.03 $3.00 $0.03 $30.00 $0.03 $30.00 $0.04 $40.00 $0.05 $50.00 $0.05 $50.00 $0.06 $60.00 $0.06 $60.00 $0.05 $50.00 $0.06 $60.00 $0.06 $60.00 $0.06 $60.00 $0.07 $70.00 $53.00 $ $14.25 $ $8.75 $87.50 $26.50 $ $2.75 $13.75 Page 10 of 12
11 200 Staples Arrow T-50 1/2" # /box box Staples Arrow T-50 3/8" # /box box Suits, Tyvek, X Large, 25/box box Tap, Machine Screws, Starter Tap, Size: 1/4-24 each Tap, Machine Screws, Starter Tap, Size; 1/4-20 each Tap, Machine Screws, Starter Tap, Size; each Tape Measure, Stanley, 25', item # each Tape, Clear, 2" x 60 yds for Tape Gun each Tape, Duct, 2" x 60 yds, Testa Brand each Tape, Masking, 2" x 60 yds each Tape, Masking, 3/4" x 60 yds each Threadlocker, Nonremovable, Permatex, Red, 6 ml, item # each Threadlocker, Removable, Permatex, Blue, 6 ml, item # each Turpentine, Steam Dist., Gallon each Twine, Nylon, 1/2 lb, size # 18, 1,000 ft/roll each Velcro Sticky Back Industrial Strength, Black 2" x 15' #90197 each Wall Standard 48", Heavy Duty Item #80W48white, black anachrome each Wall Standard 72", Heavy Duty Item #80W72white, black, anachrome each Washers, Finish, Nickel Plated, #6 each Washers, Finish, Nickel Plated, #8 each 500 $2.75 $13.75 $2.75 $13.75 $99.00 $ $6.50 $ $3.25 $78.00 $3.00 $72.00 $10.00 $ $1.45 $14.50 $3.95 $ $2.25 $ $0.95 $95.00 $12.85 $ $12.85 $ $20.00 $ $5.95 $29.75 $24.20 $ $2.95 $88.50 $4.10 $ $0.08 $40.00 $0.10 $50.00 Page 11 of 12
12 220 Washers, Finish, Nickel Plated, #10 each Washers, Finish, Nickel Plated, #12 each Water Seal, Thompson's, 5 Gallons each WD-40, 16 oz/can each Wire, Tie, 16 ga x 100' each 30 $0.12 $60.00 $0.12 $60.00 $69.50 $ $5.50 $ $4.80 $ TOTAL: $54, Page 12 of 12
MIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS
MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the
More informationSOUTHERN COLUMBIA AREA SCHOOL DISTRICT TECHNOLOGY EDUCATION BID WOOD SHOP UNIT TOTAL QUAN UNIT DESCRIPTION CO MFG# CAT # COST COST COMMENTS
2 BOX GERSON DISPOSABLE RESPIRATOR MASK-50/BX PAXTON 1501 340094 $ - $ - 4 ROLL ABRASIVE DISCS 5" STIKIT, 220 GRIT, ROLL/100 PAXTON 524306 $ - $ - 6 ROLL ABRASIVE DISCS 5" STIKIT, 80 GRIT, ROLL/100 PAXTON
More informationTools Sec. 23 2FW. 2018
Tools Sec. 23. 2018 Kits Ratchet Type Standard Nutsert Tool Part # Included In Kit Sizes Tool Type Qty. 12938 Nosepiece and Mandrel included 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 Thread Size Nosepieces
More informationShop Supplies. #00420 Kwik Pak Anchor Kit. #00421 Kwik Pak Carpenter Kit. #00422 Kwik Pak Special Electrical Kit
#00420 Kwik Pak Anchor Kit 8 Items 00455KP Rapid Drive Wall Anchor Kwik Pak 1 00472KP Heavy Duty Plastic Screw Anchor Kwik Pak 1 00506KP Phillips Binding Head SMS Kwik Pak 1 90620 Carbide Tipped Masonry
More informationTools Sec. 23 $SU. 201
Tools Sec. 23. 201 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning 6
More informationTools Sec. 23 Jun. 2018
Tools Sec. 23 Jun. 2018 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning
More informationMILWAUKEE TOOLS
INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...
More informationATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS
ATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions and
More informationFREESTANDING DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS
FREESTANDING DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions
More informationCONTENTS OVERVIEW. For a complete set of CAD drawing details, please visit LaminatorsInc.com. 1 Essential Equipment. 1 Essential Supplies
LaminatorsInc.com CONTENTS 1 Essential Equipment 1 Essential Supplies 2 Panel Preparation 4 Panel Extrusion Preparation 5 Panel Assembly 6 Wall Sheathing Preparation (Over Plywood) 6 Wall Sheathing Preparation
More informationATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS
ATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions and
More informationPRO CYCTM PRO CYC, INC. SYSTEM 1.5 FS
ASSEMBLY INSTRUCTIONS Congratulations on your decision to use the world s most advanced and user-friendly cyclorama system. We have taken a great deal of care to create and ship your cyc, so please take
More informationHardwood Installation Products. Catalog No. 4
Hardwood Installation Products Catalog No. 4 Table of Contents Pages 1 2-4 5 6 7 8 9 Product Categories Moisture Meter & Self Leveling Concrete Restoration & Blades Abrasives Fastening Cutters & Accessories
More informationSuper Closeout Deals
Super Closeout Deals Fastronix dealers as well as the general public are welcome to purchase items from our Super Closeout Deals page. You will find a wide assortment of products PRICED TO MOVE! If you
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationBalustrade Systems / Installation Instructions
A. PARTS AND SUPPLIES NEEDED FOR INSTALLATION Hardware included for each 10 section of rail: 2 3 x 1-1/2 L-brackets 4 1-3/4 x 3/16 Blue hex-head screws for anchoring the L-brackets to the newel cap, column
More informationPRO CYC PRO CYC, INC. SYSTEM SUPER 1.5QS
Assembly Instructions System Super 1.5QS Congratulations on your decision to use the world s most advanced and user-friendly cyclorama system. We have taken a great deal of care to create and ship your
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
WITH OPTIONAL S.S. S PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION
More informationMATERIALS LIST - DARQUEST INDUSTRIES, CORP.
MATERIALS LIST - DARQUEST INDUSTRIES, CORP. Order these items direct from Darquest QTY ITEM # DESCRIPTION PRICE ea. EXTENSION NAILS 0015 20d (3 3/4") ARDOX DECK NAILS -per lb. 0010 10d (2 7/8") ARDOX DECK
More informationPAINTJOB CATALOGUE HOLLAND IMPORTS INC.
PAINTJOB CATALOGUE HOLLAND IMPORTS INC. OUR STORY FOLLOW US @Holland Imports Inc. @Holland_Imports @Holland Imports Inc. For nearly 50 years, Holland Imports has helped Canadians complete thousands of
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTORITY
WITH WOOD END CAPS PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! 3" [77.3mm] THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE
More informationINSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA
INSTALLATION INSTRUCTIONS KK-K9-C12-K 2000-2005 CHEVY IMPALA READ ALL INSTRUCTIONS PRIOR TO INSTALLATION TOOLS REQUIRED: Power Drill Drill bits1/4 and 5/32 7/l6 wrench and socket 15,18 and\or 19mm socket
More information3" [76.0mm] HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
WITH OPTIONAL S.S. S PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION
More informationHow-to-Install. Laminate Countertops and Sheet Laminate. FREE brochure Reverso en español
FREE brochure Reverso en español How-to-Install Laminate Countertops and Easy to install instructions provided inside Multiple colors available for unique design options Durable and easy to care for Accessory
More information176 S. New Holland Road Gordonville, PA Tel: Fax: Summit Tower
176 S. New Holland Road Gordonville, PA 17529 Tel: 717-768-0066 Fax: 717-768-8569 A S S E M B LY M A N U A L Summit Tower Summit Tower Assembly Manual revised 9/07/05 Dear Customer, Thank you for your
More informationInstallation Guide. Pionite Decorative Surfaces One Pionite Road, Auburn, Maine PIONITE ( )
Installation Guide A Subsidiary of Panolam Surface Systems SMPBRO00-012 6/14 Pionite decorative laminates are designed for finished interior surfaces which require high impact, wear and stain resistance
More information2. Sanding the Modules Sand the entire surface of each cyc module with 60-grit sandpaper. This will provide for better paint adhesion.
ASSEMBLY INSTRUCTIONS SYSTEM 4 BI (Built-In) Congratulations on your decision to use the world s most advanced and user-friendly cyclorama system. We have taken a great deal of care to create and ship
More informationPOWER TOOL ACCESSORY GUIDE
POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN
More informationSTOCK UP & SAVE! BRAND NAME PRODUCTS! HUGE SAVINGS!
Save up to 50% in Instant Savings Price Valid to August 31/17 or While Quantities Last STOCK UP & SAVE! BRAND NAME PRODUCTS! HUGE SAVINGS! Woodstock 150-Piece Mega Brush Set D3105 50 Foam 50 Bristle 50
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
More informationSTART HERE BEFORE YOU BEGIN FIG 1 STEP 2
PROFESSIONAL INSTALL RECOMMENDED REAR MODULAR / MULTI LED ROOF MOUNTS PART#: Z350040 / Z350050 REAR ROOF LED LIGHT MOUNTS Parts included (1) - Driver Side Roof Mount Upright (1) - Passenger Side Roof Mount
More informationInstallation Instructions
Installation Instructions Follow these simple instructions to install your OneDayCab! IMPORTANT: Unpack and check shipment for damage. Verify color, size and parts before demolition. Installation of interiors
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationBalustrade System Installation - Cambridge & Huntington
A. PARTS AND SUPPLIES NEEDED FOR INSTALLATION Hardware included for each 10 section of rail: 2 3 x 1-1/2 L-brackets 4 1-3/4 x 3/16 Blue hex-head screws for anchoring the L-brackets to the newel cap, column
More informationUNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench
Motion Pro T-Handle Socket Wrenches Metric T-Handles feature a durable nickel pewter finish Deep 6-point sockets Lifetime replacement warranty DESCRIPTION TCI PART # RETAIL 8 mm Socket 722-8093 $ 17.95-J
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTORITY
WOOD END CAPS PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE HRWS-6CSLBW INSTALLATION! 3 1/16" [77.7mm] THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW
More informationProduct Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
More informationInstallation Instructions
For Medium (15-18.5K) + Heavy duty (-8.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges
More informationInstallation Instructions
For Medium (15-18.5K) + Heavy duty (22-28.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp
More informationPanel Installation Instructions
EXTREMELY IMPORTANT INFORMATION PLEASE READ ENTIRE PACKET! Warranty Is Void If Panels Not Installed According to Instructions 1. WARNINGS & SPECIAL NOTES 1.1 Keep panels 24 from Heaters and shield Radiant
More informationAdorn Mortarless Stone Veneer Installation Natural Concrete Products
Adorn Mortarless Stone Veneer Installation Adorn Mortarless Stone Veneer can be used on new or existing construction. Adorn is nailed or screwed onto the wall; therefore no brick ledge is required. Adorn
More informationPARTS LIST GALAXY DS FLOOR MACHINE
PARTS LIST GALAXY DS FLOOR MACHINE ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL - GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1 105 0393441 HANDLE
More informationDOCK WEDGE - STANDARD
DOCK WEDGE - STANDARD INSTALLATION INSTRUCTIONS WOOD HEADER READ ALL INSTRUCTIONS BEFORE INSTALLING SEAL. SUPER SEAL MFG. LTD. WILL NOT BE HELD RESPONSIBLE FOR IMPROPER INSTALLATION OF ANCHORING DEVICES,
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step as shown. Observe all local, state, and national electrical codes
More informationMAGNUM BOARD INTERIOR INSTALLATION GUIDELINES
TECHNICAL BULLETIN No.: 090509-1405 Subject: Issue Date: September 4, 2009 Issue No.: II MAGNUM BOARD INTERIOR INSTALLATION GUIDELINES 1. CUTTING MAGNUM BOARD You can easily cut Magnum Board with carbide
More informationREAD BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION
edium + Heavy duty READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Pay attention to danger and safety notices. be exposed: Carefully
More informationInstallation Instructions
edium + Heavy duty READ BEFORE INSTALLING UNIT Preliminary instructions: 1. Check window opening size: the mounting parts furnished with this air conditioner are made to install in a wooden sill double-hung
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationTitan Installation Instructions
Titan Installation Instructions Introduction: This manual was written to cover the fabrication and installation of sink bowls and tub and shower surrounds in residential and commercial applications. As
More informationProf. Steven S. Saliterman Introductory Medical Device Prototyping
Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ You must complete safety instruction before using tools and equipment in
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
P-RSS PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-RSS INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
More informationInstallation Instructions
www.marlite.com Effective Date 03/01/2018 ARTIZAN FRP, SYMMETRIX FRP, ENVUE FRP, STANDARD FRP Installation Instructions Statements expressed in this technical bulletin are recommendations for the application
More informationBioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
More informationChapter # 002 : Creating Threaded Metal Anchoring Points in Fiberglass Foam Structures
Chapter # 002 : Creating Threaded Metal Anchoring Points in Fiberglass Foam Structures The following is a method of creating permanent, threaded, metal anchor point in a foam & fiberglass structure. The
More informationMake every component count.
Make every component count. Technical Bulletin Installation Instructions ABOUT THE MATERIAL The frame and material have been thoroughly tested for strength, durability and low maintenance, offering a never
More informationTOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
More informationPanel Installation Instructions
EXTREMELY IMPORTANT INFORMATION PLEASE READ ENTIRE PACKET! Warranty Is Void If Panels Not Installed According to Instructions 1. WARNINGS & SPECIAL NOTES 1.1 Keep panels 24 from Heaters and shield Radiant
More informationMODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
More informationANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More information2. Sanding the Modules Sand the entire surface of each cyc module with 60-grit sandpaper. This will provide for better paint adhesion.
ASSEMBLY INSTRUCTIONS SYSTEM SUPER 2.5 EZ Congratulations on your decision to use the world s most advanced and user-friendly cyclorama system. We have taken a great deal of care to create and ship your
More information521 South Al Davis Road New Orleans, LA General Catalog Series Pure Bristle Chip Brushes Natural White Bristle, Plain Sanded Wood Handle
Toll Free (800) 722-9382 Local (504) 733-2516 For lightning quick shipments of brushes, rollers, frames, trays and other paint sundries 521 South Al Davis Road New Orleans, LA 70123 General Catalog 1000
More informationWholesale Price Sheet
Toll Free (800) 722-9382 Local (504) 733-2516 For lightning quick shipments of brushes, rollers, frames, trays and other paint sundries 521 South Al Davis Road New Orleans, LA 70123 January 6, 2014 Wholesale
More informationAluminum Clad Wood Window 1/2 Reinforced Field Mulling and Stacking Supplement
Aluminum Clad Wood Window 1/2 Reinforced Field Mulling and Stacking Supplement 1 Aluminum Clad Wood Window 1/2 Reinforced Field Mulling and Stacking Supplement The following instructions are a supplement
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-RSAN-INT INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
More informationInstallation Instructions Palladium Wall Panels - Demountable Factory Finished Edges and Field Cut Edges
Please read all instructions before installing Palladium Wall Panel System. 1. Before installation: a. Acclimate Palladium Panels, reveals, adhesives and wall substrates to room temperature 24 hours before
More information11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
More information#70 grit sand Putty knives, sized as needed #1 fine gray sand Corner tools Milestone acrylic liquid
Countertops Supplies Tools White and/or gray Milestone cement 12 inch steel trowel #70 grit sand Putty knives, sized as needed #1 fine gray sand Corner tools Milestone acrylic liquid Hock Universal tints
More informationTape Measure Metal Clippers Screw Bit Set With Extensions
IMPORTANT: Read through instructions thoroughly before beginning to replace any damaged material. Minor damage can be fixed with a fiberglass repair kit and color matched paint. Tools Required Tape Measure
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationSLIM TRIM MOULDING INSTALLATION METHODS
Slim Trim as a reducer Use SlimTrack (Metal Track) for up to 4 mm floors. Up to 4 mm Floors 3/8 *If the flooring manufacturer suggests/permits the use of underlayments you may need to shim the track to
More informationFABRICATION & INSTALLATION MANUAL
FABRICATION & INSTALLATION MANUAL INTRODUCTION PROForms and PROPlate Structural Shapes, PROGrid Molded Grating and PROGrate Pultruded Grating are designed to provide superior mechanical properties and
More informationBULLDOG Hardware Inventory UPC Description QTY antique upholstery nails upholstery nails gold 600
25188039116 antique upholstery nails 290 25188039321 upholstery nails gold 600 25188060035 blued tacks #6 1/2 600 25188060042 blued tacks #8 9/16 433 25188060059 blued tacks #10 5/8 450 25188060073 blued
More informationSalter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
More informationPRO CYC PRO CYC, INC. SYSTEM SUPER 3EZ
ASSEMBLY INSTRUCTIONS SYSTEM SUPER 3 EZ Congratulations on your decision to use the world s most advanced and user-friendly cyclorama system. We have taken a great deal of care to create and ship your
More informationBedtime for Bondo MERA Training
Bedtime for Bondo 2002 MERA Training Section 1: Making the Plug/Model This section will show the process of building a plug/model for a plaster mold.this will represent what the final fiberglass part
More informationInstallation Instructions
Aspex Digitally Printed Wall Art PL PREMIUM HEAVY DUTY ADHESIVE ASPEX WALL ART DOUBLE SIDED FOAM TAPE Installation of Aspex Digitally Printed Wall Art with Foam Tape and PL Premium Adhesive. Maximum size
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationtool Accessory Catalogue 2011
tool Accessory Catalogue 2011 NEW Hand Tools Also Inside Saint John Moncton Dartmouth Halifax Sydney 331 Chelsey Dr. 320 Edlinburgh Dr. Akerley Blvd. 3630 Strawberry Hill 397 George St. Toll Free: 1-888-846-7637
More informationInstalling your new Bevella Top. L Shaped Countertop with Joints No Finished Ends (Fits Between Four Walls)
Installing your new Bevella Top L Shaped Countertop with Joints No Finished Ends (Fits Between Four Walls) Bevella RTI Countertops are engineered and manufactured to the highest quality standards, built
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationDURARAIL POWDER COATING
DURARAIL POWDER COATING We believe that Durarail provides the best powder produced in the industry (TGIC powder by DuraCoat and Tiger Drylac) today, but like any other industrial finish, it will naturally
More informationREP Design LLC. 193 Winding Ridge Rd, Southington, CT INSTALLATION INSTRUCTIONS:
REP Design LLC 193 Winding Ridge Rd, Southington, CT 06489 1-860.426.1894 n7emw@cox.net www.repdesign.us INSTALLATION INSTRUCTIONS: SHD-SO239 Super Heavy Duty SO-239Antenna Mounting System Thank you for
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationPARTS LIST GALAXY DS FLOOR MACHINE
PARTS LIST GALAXY DS FLOOR MACHINE HANDLE TUBE ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1
More informationInstallation for Full Size Polaris Ranger Crew Doors
Installation for Full Size Polaris Ranger Crew Doors Order of Installation: Heater Doors Wiper on to Windshield Windshield Top & Back Panel Note: Most of the steps in these instructions need to be repeated
More informationPRO CYC PRO CYC, INC. SYSTEM SUPER 1.5 EZ
ASSEMBLY INSTRUCTIONS SYSTEM SUPER 1.5 EZ Congratulations on your decision to use the world s most advanced and user-friendly cyclorama system. We have taken a great deal of care to create and ship your
More informationBi-Metal Cobalt Reciprocating Blades...1, 2. Hole Saws...3. Hole Saw Sets...4. Hole Saw Arbors and Accessories...4. Hacksaw Blades...
Category Page Bi-Metal Cobalt Reciprocating Blades.....................1, 2 Hole Saws...........................................................3 Hole Saw Sets......................................................4
More informationNOTE: THIS DOCUMENT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT AN OFFICIAL BID DOCUMENT.
1 Aluminum Coil Stock, 50' x 24" (White), 26 Gauge each 12 2 Aluminum Coil Stock, 50'x24", Bronze Tone, 26 Gauge each 6 3 Anchors, Hammer Drive (Lead) 1/4" x 1 1/4" each 250 4 Angle, Black Iron, 1 1/2"
More informationBoughton Road, Stoke Ferry, King s Lynn, Norfolk. PE33 9BF Tel: Fax:
Shop IRONMONGERY Size Unit Field Gate Set (12") 300 mm Field Gate Set (24") 600 mm Field Gate Catch and Peg Adjustable Gate Eye Hook on Square Plate 100 mm Throw Over Gate Loops Drop Bolt 18" (Galv) 450
More informationDuralam Wall Linings. Installation Guide. Duralam 6mm Compact Laminate Wall Panelling Installation Guide
Duralam Wall Linings Installation Guide 2016 Handle Panels with Care Compact Laminate panels are very dense and durable panels, however if they are mistreated, stored or handled incorrectly it could potentially
More informationCurium 19.4H Installation Instructions & Parts List
Curium 19.4H Installation Instructions & Parts List Illustration Curium 19.4H Right Hand Page 1 of 21 30/06/2016 Revision 1.0 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationSandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value
Sandpaper Product Guide Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Index Introduction to Abrasives Abrasive Components... 3 Sandpaper
More informationIndustrial Strength Adhesive Works in all Climates
2011-MNI Industrial Strength Adhesive Works in all Climates Butyl Magic - A NEW Alternative to EternaBond EternaBond is a product of Adco Global Our Product Butyl Magic is a self-adhesive sealing tape
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationSteel Solutions USA 602 E. Walnut Street Watseka, IL p: (888) f: (815)
Steel Solutions USA 602 E. Walnut Street Watseka, IL 60970 p: (888) 875-5004 f: (815) 432-3364 sales@steelsolutionsusa.com Published February 2011 2011 Steel Solutions USA. All rights reserved. version
More informationChapter 19. Interior Finish Work
Chapter 19. Interior Finish Work 19.1 INSTALLING FLOOR TRIM 19.2 INSTALLING CLOSET SHELVES AND POLES 19.3 INSTALLING BATHROOM ACCESSORIES 19.4 HANGING MINI-BLINDS 19.5 INSTALLING APPLIANCES 19.6 INSTALLING
More information176 S. New Holland Road Gordonville, PA Tel: Fax: Eagles Nest
176 S. New Holland Road Gordonville, PA 17529 Tel: 717-768-0066 Fax: 717-768-8569 A S S E M B LY M A N U A L Eagles Nest Eagles Nest Assembly Manual revised 9/2/05 Dear Customer, Thank you for your purchase
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More information