ML40/80. 2 Axis Combination Lathe STANDARD FEATURES

Transcription

1 ML40/80 2 Axis Combination Lathe STANDARD FEATURES Milltronics 8200-B series CNC control Solid box way bed construction 900 RPM spindle Tailstock Auto lubrication Metal enclosure w/ front traveling guard 6.02" Spindle bore w/ A2-11 Nose Rear mount chuck flange 12" LCD color display 2 Speed gear box Spindle load meter Flood coolant Solid model graphic display USB Port Gap bed design 8 Station1 ½" automatic turret LCD hour meter Thread chasing feature One year warranty CSS ML4080, Page 1 of 10

2 SPECIFICATIONS CAPACITY: X axis travel Z axis travel Swing over bed (diam) Swing over gap (diam) Swing over cross slide (diam) Gap distance 21" (550 mm) 87" (2210 mm) 39.7" (1010 mm) 50" (1280 mm) 26.6" (675 mm) 14.6" (370 mm) SPINDLE: Spindle bore (STD) 6.02" (153 mm) Spindle nose (STD) A2-11 Spindle range (STD) RPM Low Range High Range Spindle bore (OPT) 10" (254 mm) Spindle nose (OPT) A2-15 Spindle range (OPT) RPM Low Range High Range Spindle bore (OPT) 14" (355 mm) Spindle nose (OPT) A2-20 Spindle range (OPT) RPM Low Range High Range AC spindle motor 35/25 HP (26/18 kw) Spindle torque 1850 ft-lbs (2500 N.m) TAILSTOCK: Tailstock quill travel Tailstock quill diameter Tailstock quill taper 9" (230 mm) 4.92" (125 mm) MT6 AUTOMATIC TURRET: Number of tools 8 Tooling size 1.5" (38 mm) Boring bar capacity 2" (50 mm) Tool selection Bi-directional MOTION: X, Z axis rapid traverse rate 500 IPM (12.7 m/min) Max. cutting feed rate 100 IPM (2540 mm/min) X axis ball screw diameter 1.57" (40 mm) Z axis ball screw diameter 2.48" (63 mm) Positioning accuracy +/ " (+/ mm) Repeatability " (0.010mm) Axis thrust force X,Z 6700 lbs. (3000 kg) GENERAL: Machine Height Floor Space Required (W x D) Machine Weight Power required Voltage required 90" (2286 mm) 193" x110" (4902 x 2794 mm) 24,500 lbs. (11,000 kg) 48 KVA / 125 amps Volts / 3 Phase ML4080, Page 2 of 10

3 CONSTRUCTION * BED, CROSS SLIDE AND SADDLE: The bed, cross slide, and saddle are composed of Meehanite cast iron, which includes very high dampening characteristics. Heavily ribbed castings provide superior dampening decreasing vibration and harmonics providing aggressive turning ability. The bed casting and saddle are stress relieved to ensure machine geometry is maintained. Spacing of the solid box bed ways creates optimal support for the saddle in full travel. The gap (14.6") allows larger turning near the spindle. The "T" slotted cross slide is fully ground and hardened and allows easy mounting of custom tooling. * WAY SURFACES: The X & Z-axis way surfaces are hardened and ground with turcite. The square box ways on the Z axis provide added rigidity and strength over a conventional "V" way. Additionally the Z axis ways are widely spaced (560 mm) increasing the stability of the bed and slide providing superior cutting performance. The way surfaces on both axes utilize gibs with easy adjustment to maximize rigidity and maintain geometry throughout the life of the machine tool. * SPINDLE AND HEADSTOCK: The fully balanced spindle is driven using a 35/25 HP (26/18 kw) closed loop full regen AC servo motor. Heavy exterior ribbing on the headstock allows for added rigidity and increased surface area for heat transfer. The spindle is directly driven using a two speed gear box. The gear box is shifted automatically using an air supply. Rugged, precision, large diameter bearings support the spindle allowing for heavy work pieces. The standard 6" spindle bore accommodates large thru bore work along with the rear chuck mount. (10" and 14" bores are available.) CSS function is standard promoting longer tooling life and improved part finish. * BALL SCREWS AND AXIS DRIVES: Each axis is driven using a high precision, fully ground ball screw. Each ball screw is supported on each end using angular contact thrust bearings to achieve high rapid traverse rates and thrust. The Z axis ball screw is directly driven using AC servo type motors minimizing backlash and vibration. The 5 mm (X) and 12 mm (Z) pitch ball screws provide a high level of accuracy while maintaining adequate thrust. * AUTOMATIC TURRET: An 8 position automatic turret provides quick, reliable tool changes. Turning holders utilize 1.5" square shank tooling and boring bar holders can accommodate 2". The bi-directional turret comes standard with 1 boring bar holder and 1 axial tool holder. Additional holders are available and are interchangeable from station to station. * LUBRICATION: Automatic lubrication is provided to the way surfaces and ball screws with oil to eliminate wear. Way oil is delivered by metered valves, which precisely control the volume. A low oil-level alarm warns the user preventing possible damage to the way surfaces and ball screws. * TAILSTOCK: The design of the interface free tailstock allows for full cutting along the Z axis travel. The oversized tailstock is ideal for supporting heavy work pieces. The tailstock is easily positioned using a carriage connection coupler. The quill can be moved manually up to 8". A MT#6 dead center is provided with the tailstock. * COOLANT SYSTEM: A high volume coolant pump (3/4HP) delivers coolant to the coolant nozzle(s) on each turret station. The 90 gallon coolant tank is separate from the machine bed allowing for quick and easy maintenance. The chip drawer rests above the coolant tank filtering chips from reaching the coolant tank and pump. The coolant tank and chip drawer are easily removed from the rear of the machine to allow for chip removal. An optional belt type chip conveyor with chip wash down system is available. * EDIT KEY: The edit key enables protection of programs as well as parameters of the 8200-B CNC control. Removal of the key limits a user from loading programs and parameters such as work coordinates and tool offsets. With the edit key in the off position the data in the CNC control is available for editing. ML4080, Page 3 of 10

4 STANDARD EQUIPMENT IN BASE PRICE Milltronics 8200-B CNC 12" Color LCD display Ethernet Connection USB Port Auxiliary Keyboard jack with keyboard Offline FastCAM software for programming User Definable Custom Macros Feedrate and Spindle speed overrides Spindle load meter Edit key lock-out switch LCD hour meter Tri-color end of cycle warning light Single spare "M" function with CNC wait channel Rigid Tapping Remote Handwheel (MPG) Work light Meehanite cast iron bed Gap bed design 900 RPM spindle 35/25 HP (22.5/18 kw) Two range gear box 6" Spindle bore w/a2-11 Spindle nose Rear mount chuck flange Fully ground solid ways with turcite Flood coolant Sliding door enclosure design Sliding chuck guard door with safety switch Door interlock safety switch AC Servo motors driven to oversized ball screws on all axes Double anchored ball screws 500 IPM Rapid Traverse rate Matched AC Servo Amplifiers on all axes CSS and Feed/rev with threading, rigid tapping, and thread chasing cycles Rear mounted 8 Station 1 ½" Automatic Turret Dual Electronic Handwheels for Teach, manual or automatic operation Tail Stock latch and position coupler Automatic metered way oil lubrication Instruction manual, parts list, and electrical drawings UL certified Operator and maintenance manuals One year warranty ML40/80 with 8200-B Series CNC Control PRICE IS F.C.A. Waconia, MN USA Milltronics USA reserves the right to incorporate any modifications or improvements in machines and machine specifications that it considers necessary, but are not documented within this quotation. Milltronics is not responsible for misprints or typographical errors. Proposal is valid for 30 days after presentation. ML4080, Page 4 of 10

5 OPTIONAL ACCESSORIES: Optional Spindle Bores: " (254mm) Spindle bore upgrade Spindle RPM " (355mm) Spindle bore upgrade Spindle RPM Work Holding: Steady Rest Roller Type " ( mm) Capacity Steady Rest Roller Type " ( mm) Capacity Follow Rest Brass Tip " ( mm) Capacity *Chucks quoted on request per application Tooling: " Boring Bar Holder for 1" Automatic Turret " Axial Tool Holder for 1" Automatic Turret Additional Machine Accessories: ML Baruffaldi TBMA200 Live Tool Turret Consult factory for limitations Requires spindle orient & brake ML-151 Spindle Orient C Axis Interface Spindle Brake Standard axial holder (VDI50) Standard radial holder (VDI50) Spare "M" Functions Block of Printed programming manual Printed machine manual Chip Conveyor: Belt type chip conveyor system with chip wash down. Replaces the standard chip drawers Training: Factory machine installation including on-site training U.S. Only - Includes airfare and all expenses Training at Milltronics Export Packaging: Required for machines shipping outside of North America ML4080, Page 5 of 10

6 Milltronics 8200-B Series CNC Control Features 12" LCD color display 2000 blocks/second high speed processor Conversational programming Fanuc based G&M Code programming Inch/Metric Conversion / programming Manual Machine Operations Single Automatic Operation w/teach Mode Auto routines User definable macros with trig assist Custom Macro B Auto DXF file import Part and wire frame tool path graphics Solid Model Graphic Display Onboard diagnostics Spindle load meter Part counter display 1 GB parts program memory Networking USB Port Manual pulse generator Coordinate rotating Scaling Mirror image Feedrate and Spindle Override Tool radius and length offsets (24 total) Tool Load Monitoring 6 Work Coordinates (G54-G59) G92 Coordinate system setting Backlash Compensation Ballscrew pitch error compensation Rigid tapping/ threading cycles Canned cycles including: o Drilling o Turning o Facing o Boring o Tapping o Grooving o Threading o 3D Pocket/Sweep o Tangent/Circle Generate Subprogram Call-50 nested programs maximum MDI Background Editing Program/Parameter protect ML4080, Page 6 of 10

7 Yaskawa Torque Chart 35/25/2/GL/Y Low Gear Used on: Standard ML40 ML4080, Page 7 of 10

8 Yaskawa Torque Chart 35/25/2/GL/Y High Gear Used on: Standard ML40 ML4080, Page 8 of 10

9 LIMITED WARRANTY Subject to the terms of this Limited Warranty, Milltronics USA, Inc. ( Milltronics ) warrants to the End User that the Milltronics Machine Tool, Replacement Part or Accessory (each, a Product ) for which this Limited Warranty is issued will be free from any Covered Defect during the Warranty Period for the Product. Milltronics will replace or repair, at its option, a Product with a Covered Defect at no expense to its End User, except that: (1) End User must pay for all shipping costs (including freight charges, taxes, and insurance), except shipping costs for repaired parts and components or a Replacement Part shipped under this Limited Warranty by Milltronics to End User or an Authorized Distributor. End User must report to Milltronics in writing any Covered Defect as soon as practicable upon its discovery and in all events prior to the expiration of the Warranty Period for the Product. Milltronics shall have no responsibility with respect to any Covered Defect which is not reported to Milltronics by written notice prior to the expiration of the Warranty Period for the Product. End User must allow Milltronics or an Authorized Distributor to inspect and test the Product during business hours to determine if there is a Covered Defect. At the option of Milltronics, a Product with a Covered Defect will be repaired at End User s location, and should not be returned to Milltronics except upon inspection and testing by Milltronics or, with prior approval of Milltronics, an Authorized Distributor. Upon request, End User must return for repair or replacement, with shipping costs paid by End User, the Product or part(s) or component(s) of a Product with a Covered Defect to Milltronics at the following address: Milltronics USA, Inc., 1400 Mill Lane, Waconia, Minnesota All parts, components and Products replaced by Milltronics shall become the property of Milltronics. This Limited Warranty is effective and valid only if the Authorized Distributor from which the Product is purchased (or Milltronics, if it is the seller) is paid in full for the Product, and the End User for that Product executes Milltronics-provided installation acknowledgments and forms upon completion of installation of the Product. As used in this Limited Warranty: (a) Accessory means a new accessory, kit or optional equipment supplied and installed on a Milltronics Machine Tool by Milltronics or an Authorized Distributor at any time after the initial installation of that Milltronics Machine Tool. (b) Authorized Distributor means a Person authorized by Milltronics to sell and service Milltronics Machine Tools. (c) Covered Defect means a failure of a Product during the Warranty Period to conform in any substantial way during normal use with the performance specifications and standards established by Milltronics for that Product; provided that such failure is not caused by or resulting from any of the following: (i) normal wear and tear or deterioration; (ii) inadequate or improper maintenance, such as End User s failure to clean, lubricate, replenish or replace oil, fluids, coolants, lamps, fuses, belts, filters and similar items; (ii) accident, negligence, theft, weather, electrical surges or lightning, fire or any other peril, misuse, abuse, programming error, improper operation or failure to follow fully maintenance and operation instructions provided by Milltronics or a Milltronics technical specialist to End User; (iv) mishandling, improper packaging or any other act which occurs during or in connection with shipment of the Product, or during or in connection with its rigging or installation, unless caused by Milltronics or an Authorized Distributor; and (v) any repair, replacement, modification or alteration of the Product which is not authorized by Milltronics. (d) End User means the Person who purchases for its own use directly from Milltronics or an Authorized Distributor the Product for which this Limited Warranty is issued, and, so long as any relocating and reinstallation of the Product is performed by an Authorized Distributor or Milltronics, also any Person who purchases the Product from its initial End User prior to expiration of the Warranty Period for the Product. The term does not include any Person who purchases the Product for resale, lease or other transfer to, or use by, another Person. (e) Milltronics Machine Tool means a machine tool manufactured by or for Milltronics, bearing the name Milltronics and a Milltronics trademark and serial number, and purchased by an End User new directly from Milltronics or an Authorized Distributor, together with any accessory, component, kit or optional equipment installed on that Milltronics Machine Tool by Milltronics or an Authorized Distributor prior to or at the time of initial installation of that Milltronics Machine Tool. (f) Person means and includes an individual, partnership, joint venture, corporation, limited liability company, trust or other legal entity. ML4080, Page 9 of 10

10 (g) Replacement Part means a new or rebuilt genuine part or component bearing a Milltronics trademark provided by Milltronics or an Authorized Distributor under this Limited Warranty in replacement of a part or component of a Product. (h) Warranty Period means: (i) for a Milltronics Machine Tool (other than a Tool Room Milltronics Machine Tool), unless a different warranty period is expressly stated in the quotation issued by Milltronics for that Product, a period of One (1) Year Parts and Labor, and for a Milltronics Tool Room Machine Tool, unless a different warranty period is expressly stated in the quotation issued by Milltronics for that Product, a period of One (1) Year Parts, Six (6) Months Labor. These periods begin on the earlier of: (1) the date of the first use of the Milltronics Machine Tool by its initial End User; and (2) the date which is 30 days after shipment by or for Milltronics of the Milltronics Machine Tool to an Authorized Distributor or the End User. (The warranty period may be extended, on exception basis, by a separate warranty extension issued in writing by Milltronics to the End User for a Milltronics Machine Tool); (ii) for a Replacement Part, a period which is the longer of: (i) the 90 days after the date of its shipment by or for Milltronics to an Authorized Distributor or the End User; and (ii) expiration of the Warranty Period for the Milltronics Machine Tool on which that Replacement Part is installed; and (iii) for an Accessory, a period which is the longer of: (i) the 90 days after the date of its shipment by or for Milltronics to an Authorized Distributor or the End User; and (ii) expiration of the Warranty Period for the Milltronics Machine Tool on which the Accessory is installed. FOR ALL PRODUCTS, MILLTRONICS DISCLAIMS ALL EXPRESS WARRANTIES, EXCEPTING ONLY THIS LIMITED WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. END USER S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY IS REPAIR OR REPLACEMENT, AT THE OPTION OF MILLTRONICS, OF THE PRODUCT WITH A COVERED DEFECT. IN NO EVENT SHALL MILLTRONICS BE LIABLE TO END USER OR ANY OTHER PERSON FOR DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST WAGES, INOPERATIVE MACHINE OR SOFTWARE TIME, PARTS PROGRAMS, SCRAP PARTS, INFRINGEMENT, OR ANY OTHER INDIRECT INCIDENTAL, CONSEQUENTIAL, SPECIAL OR SIMILAR DAMAGES, OR FOR ANY DAMAGE OR INJURIES RESULTING FROM THE USE, OPERATION OR POSSESSION OF ANY PRODUCT OR ANY CLAIMS OR DEMANDS BROUGHT AGAINST END USER, HOWEVER CAUSED AND UNDER ANY THEORY OF LIABILITY, EVEN IF MILLTRONICS WAS ADVISED OF THE POSSIBILITY OF SUCH CLAIMS. MILLTRONICS USA RESERVATIONS AND MACHINE SHUT DOWN DEVICE ADVISORY Milltronics USA reserves the right to incorporate any modifications or improvements in machines and machine specifications that it considers necessary, but are not documented within this quotation. Milltronics USA may install on any machine a CNC shut-down timer which requires a password to reactivate the Machine, will cause a machining or turning center to shut down. All purchasers are advised and at purchase shall be deemed to have consented to the installation of a shut-down timer, understanding that Milltronics USA or Authorized Distributor may have or obtain access to the required password to reactivate the machine should this be required in the event of payment default. Milltronics USA is not responsible for misprints or typographical errors in this Proposal. Proposal is valid for 30 days after presentation. For questions regarding this Limited Warranty, please contact the Authorized Distributor or: Milltronics USA, Inc Mill Lane, Waconia, MN USA Main: Service: service@milltronics.net ML4080, Page 10 of 10