STAND BEHIND YOUR WORK WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018

Transcription

1 WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018 STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE

2 22" SCROLLSAW Upper blade holder clamps and tensions blade in one step (Patent Pending). Removable lower blade holder snaps quickly and securely in to place. Slotted table for easier and quicker blade changes 22 3/8" throat capacity. Arm tilts 45 right and 40 left, keeping the work table flat for more accurate cutting. Integrated blade storage features slots for pre-loaded blades and a built-in wrench for changing blades. Blade storage can be positioned on the right or left of the machine. Top lift, spring loaded arm raises 10" and stays up until pulled back down. Removable dust port on underside of table to collect dust at the source. Stand can be adjusted to 4 different heights /4", 26-3/4", 28-3/4", or 31-3/4" (using the leveling feet). Variable speed range of strokes per minute. 2" maximum cutting depth. Conveniently located speed and tension controls. Included Equipment: Two Lower Blade Holders, Material Hold Down, Onboard Dust Blower, Foot Switch. $ STOCK NO K K JWSS-22 Scroll Saw with Stand and Foot Switch $ B JWSS-22B Scroll Saw with Foot Switch $ JWSS Lower Blade Holder (set of 3) $ S JWSS-22S Scroll Saw Stand $ JET WOODWORKING

3 1840 WOODWORKING LATHES Sliding headstock pivots 360 degrees with seven positive locking positions. Extended spindle nose houses dual headstock spindle bearings. Four inch cast iron risers allow user to adjust height of lathe for maximum comfort. Improved tailstock quill locking mechanism incorporates an anti-rotation key. Tailstock features Acme threads for smooth and durable movement. Banjo uses non-marring, positive locking wedge system to securely hold tool post. Tool post locking mechanism designed for year of consistent strength. Newly designed headstock locking handle accessible from front of lathe. Remote emergency stop button can be situated along the lathe bed. Spindle lock latch frees up both hands. Variable speed from RPM. 36 integrated indexing positions. Convenient leg-mounted tool holder. Conveniently located digital readout. Rubber tool mat on top of headstock. $3, STOCK NO * ONLY LATHE GUARD Mounts on bracket to headstock Easily flips away when not in use TAILSTOCK SWING AWAY Heavy duty Fits JET 14" and larger lathes 20" EXTENSION BED WITH POST Extends turning capacity to 60" Tool rest post included JWL-1840EVS Lathe 2HP, 230V $3, JWL-1840DVR Lathe 2HP, 230V $3, " Extension Bed with Post $ Tailstock Swing Away $ Lathe Guard $ Comparator Bracket $ JET JETTOOLS.COM 3

4 1640EVS WOODWORKING LATHE Sliding headstock pivots 360 degrees with seven positive locking positions. Extended spindle nose houses dual headstock spindle bearings. Improved tailstock quill locking mechanism incorporates an anti-rotation key. Tailstock features Acme threads for smooth and durable movement. Banjo uses non-marring, positive locking wedge system to securely hold tool post. Tool post locking mechanism designed for year of consistent strength. Spindle lock latch frees up both hands. Electronic infinitely variable speed from RPM. 36 integrated indexing positions. Newly designed headstock locking handle accessible from front of lathe. Convenient leg-mounted tool holder. Inverter is enclosed for added protection. Conveniently located digital readout. Rubber tool mat on top of headstock. $2, STOCK NO JWL-1640EVS 16" x 40" Electronic Variable Speed Wood Lathe, 1.5HP 1PH 115V $2, LATHE GUARD Mounts on bracket to headstock Easily flips away when not in use TAILSTOCK SWING AWAY Heavy duty Fits JET 14" and larger lathes 20" EXTENSION BED WITH POST Extends turning capacity to 60" Tool rest post included " Extension Bed with Post $ Tailstock Swing Away $ Lathe Guard $ BBC-2 Live Center MT-2 $ JET WOODWORKING

5 1440VS WOODWORKING LATHES Sliding headstock pivots 360 degrees with 7 positive locking positions at 0, 30, 60, 90, 120, 180, and 270 degrees for maximum variability and optimal user comfort. Variable speed from RPM. Positive locking tool rest with redesigned clamping. Extension bed takes the capacity to 60" between centers. ACME thread in tailstock. Improved tailstock quill locking with anti-rotation key. Easy-to-read RPM display. CSA Certified JWL-1440VS 14" x 40" Benchtop Variable Speed Wood Lathe, 1HP 1PH 115/230V $1, K JWL-1440VSK 14" x 40" Variable Speed Wood Lathe with Legs, 1HP 1PH 115/230V $1, JWL-1440VS Leg Set $ $1, STOCK NO K 1221VS WOODWORKING LATHE Unrivaled speed control RPM variable speed. Optimally designed speed ranges. Forward to reverse is a smooth transition. Innovative ratchet style belt tension system (patent pending). Integrated, spring loaded spindle lock. $ STOCK NO JWL-1221VS 12'' x 21'' Variable Speed Wood Lathe, 1HP, 115V $ A JWL-1221VS Stand $ A JWL-1221VS Stand Extension $ JWL-1221VS Bed Extension $ JWL-1221VS Stand $ A JWL-1221VS Stand Extension $ AND 1015VS WOODWORKING LATHES 15 ½" between centers. Integrated 24 position indexing has six spindle speeds 50, 840,1240, 1800, 2630 and VS has a variable RPM range of Wider bed ways for increased stability. Improved tensioning system with easier access to belts. Sturdy tool rest base. $ STOCK NO JWL-1015 Lathe $ JWL-1015VS Lathe $ JWL-1015 Bed Extension $ A JWL-1015 Stand $ A JWL-1015 Stand Extension $ JET JETTOOLS.COM 5

6 CYCLONE DUST COLLECTORS The cyclone s two stage separation provides more working CFM than comparable horsepower single stage units. Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction. Direct mounted filter allows unrestricted airflow, increasing system efficiency. Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below. Heavy debris is captured in steel drum with quick release levers and independent casters for quick emptying. Radio frequency remote control turns on dust collection from up to 50 feet away. Remote timer settings allows system to run for 2, 4, 6, or 8 hours before automatic shutoff (2HP and 3HP models only). Double paddle manual cleaning system quickly cleans the pleated filter. Swivel casters make it easy to move the unit around the shop. $1, STOCK NO DIRECT MOUNTED FILTER ELIMINATES INEFFICIENCIES FROM FLEX HOSE AND BENDS JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V $1, JCDC-2 Cyclone Dust Collector, 2HP, 230V $1, K JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V $1, Canister Collection Bag for JCDC-1.5, JCDC-2, JCDC-3 (pack of 5) $ Drum Collection Bag for JCDC-1.5 (pack of 5) $ Drum Collection Bag for JCDC-2 (pack of 5) $ Drum Collection Bag for JCDC-3 (pack of 5) $ JET WOODWORKING

7 DC-1100VX AND DC-1200VX VORTEX CONE DUST COLLECTORS Industrial-quality construction effectively handles collection of wood chips and sawdust. Quick-install collection bag makes emptying and re-attaching a snap. Single-stage design for economical and quiet operation. Includes four casters for maneuverability and total portability. High air velocity (CFM) design stands up to any competitive specifications. Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty. Optional canister filter offers superior dust collection by capturing particles as small as 2 microns. Optional Remote Control is Radio Frequency, no need for line of sight to turn machine on and off. $ STOCK NO K $ STOCK NO K K DC-1100VX-BK Dust Collector, 1.5HP 1PH 115/230V, 30-Micron Bag Filter Kit $ K DC-1100VX-5M Dust Collector, 1.5HP 1PH 115/230V, 5-Micron Bag Filter Kit $ K DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit $ K DC-1200VX-BK1 Dust Collector, 2HP 1PH 230V, 30-Micron Bag Filter Kit $ K DC-1200VX-CK1 Dust Collector, 2HP 1PH 230V, 2-Micron Canister Kit $ K DC-1200VX-BK3 Dust Collector, 2HP 3PH 230/460V, 30-Micron Bag Filter Kit $ K DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit $ DC1100-CA Vortex Cone Retrofit Kit, Fits Dust Collectors with 20" Housing $ C RF Remote Control for 115V Dust Collector $ D RF Remote Control for 220V Dust Collectors $ Aids in quick fallout of chips into the collector bag instead of clogging the filter bag or canister JET JETTOOLS.COM 7

8 DC-650 DUST COLLECTORS Hook up one to three machines for optimum dust cleaning. Quick-install collection bag makes emptying and reattaching a snap. Single-stage design for economical and quiet operation. Includes four casters for easy maneuverability and total portability. $ STOCK NO CK BK DC-650 Dust Collector, 1HP 1PH 115/230V, 30-Micron Bag Filter Kit $ MK DC-650 Dust Collector, 1HP 1PH 115/230V, 5-Micron Bag Filter Kit $ CK DC-650 Dust Collector, 1HP 1PH 115/230V, 2-Micron Canister Kit $ B 30-Micron Filter & Collection Bag Kit, DC-650 $ MF 5-Micron Filter & Collection Bag Kit DC-650 $ C 1-Micron Canister Filter Kit for DC-650 $ AIR FILTRATION Disposable Electrostatic Outer Filter attracts more dust particles than standard filters. Inner Pocket Filter is removable for easy cleaning. Remote Control has built-in timer with 2, 4, and 8-hour settings; automatically shuts system off at the end of the time setting. Fully-Enclosed Ball Bearing Motor with Overload Protection for long, dependable service. $ STOCK NO B B AFS-1000B, Air Filtration System, 3-Speed, Remote Control $ AFS-2000, Air Filtration System, 3-Speed, Remote Control $ REMOTE CONTROL AFS-1000B Electrostatic Outer Filter for AFS-1000B $ Electrostatic Outer Filter, Washable, for AFS-1000B $ Inner Filter for AFS-1000B $59.99 AFS Electrostatic Outer Filter for AFS-2000 $ Inner Filter for AFS-2000 $ Electrostatic Outer Filter, Washable, for AFS-2000 $ JET WOODWORKING

9 DUST COLLECTION Collection Bag, Clear Plastic 14" Diameter (pack of 5) $ Collection Bag, Clear Plastic 20" Diameter (pack of 5) $ Filter Bag, 30-Micron, for DC-650 $ Filter Bag, 5-Micron, for DC-650 $ Collection Bag for DC-650 $ A Snap In Collection Bag for DC-650 $ Filter Bag, 30-Micron, for DC-1100, DC-1100VX $ Collection Bag for DC-1100, DC-1100VX $ Filter Bag, 30-Micron, for DC-1200, DC-1200VX $ A Collection Bag for DC-1200, DC-1200VX, 1900,5000,5600 $ Filter Bag, 5-Micron, for DC-1100, DC-1100VX, DC-1200, DC-1200VX $ Collection Bag for DC-1200,1900,5000,5600 $ Canister Filter for DC-650TS $ Micron Filter Bag for JC-3 $ C JW1007 JW1034 JW1317 JW1000 4" TO 2-1/4"OD - 2"ID Reducer $5.99 JW1007 4" Blastgate $6.99 JW1013 4" T Fitting $9.99 JW1015 4" Y Fitting $7.99 JW1017 4" Elbow Fitting $5.99 JW1019 4" Splice Fitting $5.99 JW1022 4" Hose Clamp $1.99 JW1031 4" x 10' Hose $29.99 JW1032 4" x 20' Hose $39.99 JW1034 4" x 10' Clear Hose $49.99 JW1043 4" Connector Sleeve $5.99 JW1047 4" Quick Disconnect - Spiral End $4.99 JW Stage Dust Collection Hood $39.99 JW1053 D.C. Grounding Kit $29.99 JW1142 4" Aluminum Blastgate $14.99 JW1317 4" Wire Clamp $1.99 CAUTION: All plastic fittings and hoses must be grounded against static electrical build-up JET JETTOOLS.COM 9

10 17" DRILL PRESS Spindle travels a full 5" with one revolution of the handle. Large 14" x 19" precision ground work table features twin T-slot grooves and 4 table slots to accommodate any project. One-handed belt tensioning allows for rapid speed changes. Power switch features a safety key and large, paddle style off button. Integrated depth stop makes repetitive drilling quick and easy. Xacta-X laser system easily identifies the drill center. Long-lasting, built-in LED work light reduces shadows. Table edge lip designed to make clamping easy. Replaceable MDF table insert. Large cast iron base provides stability. Powered by an efficient 3/4HP, 1PH, 115V TEFC motor and poly-v belt drive system. CSA Certified. $ STOCK NO " SPINDLE Full 5" Travel with One Handle Revolution Improved Spindle Locking System with Integrated Depth Stop Laser-Etched Downfeed Scale DRIVE SYSTEM Poly-V Drive Belt One-Handed Tensioning System Improved Access WORK TABLE 90 Left and Right Tilt Adjustment Designed for Clamping T-Slots Accept Standard Fasteners JDP-17 17" Drill Press, 3/4HP $ JET WOODWORKING

11 15" DRILL PRESSES Spindle travels a full 3-1/8" with one revolution of the handle. Large 12-1/2" x 17" precision ground work table features twin T-slot grooves and 4 table slots to accommodate any project. One-handed belt tensioning allows for rapid speed changes. Power switch features a safety key and large, paddle-style off button. Integrated depth stop makes repetitive drilling quick and easy. Xacta-X laser system easily identifies the drill center. Long-lasting, built-in LED work light reduces shadows. Table edge lip designed to make clamping easy. Replaceable MDF table insert. Large cast iron base provides stability. Powered by an efficient 3/4HP, 1PH, 115V TEFC motor and poly-v belt drive system. CSA Certified $ STOCK NO $ STOCK NO JDP-15B, 15" Benchtop Drill Press $ JDP-15F, 15" Floorstanding Drill Press $ " BENCHTOP VARIABLE SPEED DRILL PRESS Compact benchtop design allows for easy transport to different shop locations. Heavy-Duty 1/3 HP induction motor for various drilling applications. Mechanical variable speed drive system for easy speed changes. X-shaped XACTA Laser ensures drilling accuracy. Digital readout displays spindle speed for different drilling applications. Stable base design allows for easy re-positioning on workbench. $ STOCK NO JWDP-12, 12" Bench Top Drill Press $ JET JETTOOLS.COM 11

12 BENCHTOP MORTISER Heavy-duty cast iron and steel construction provides durability and stability during use. Dependable rack-and-pinion head adjustment gives you accurate position control. Long, multi-position mortising handle lets you reposition the feed handle for easier operation and optimum handle position. Three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8" diameter shanks. $ STOCK NO JBM-5, Benchtop Mortiser, 1/2HP 1PH 115V $ Mortise Chisel and Bit 3/4" $ Mortise Chisel and Bit Kit, set of 5, (1/4", 5/16", 3/8", 1/2", 3/4") $ " WOODWORKING BENCH GRINDER 1725 RPM, optimal for sharpening common tool steels. Includes two high quality Norton wheels. Oversized Tool Rests with integrated angle indicator. Machined tool rest surface with reference lines. Durable cast iron wheel covers. Built in spark arrestors. $ STOCK NO JWBG-8 8" WW Bench Grinder with Norton Wheels $ Norton is a registered trademark of Saint-Gobain TOOL REST Integrated angle indicator Reference lines Patent pending 12 JET WOODWORKING

13 OSCILLATING SPINDLE SANDER Baffles create a chamber under the table for improved dust collection. 4" dust port connects to your dust collection system to keep your work area clean.. Spindle lock for quick and easy spindle changes. Table tilts 45 front and 15 back and features a 90 quick index. Integrated storage provides designated slots for spindles and table inserts. Sealed access door minimizes dust in the storage area. 1-1/2" oscillating action reduces friction heat to protect wood and prolong sleeve life. Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance. Integrated paddle switch with safety key. Powerful 1HP motor is independently mounted inside the base for easy access and service. Includes 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", and 4" spindle assemblies. Spindles have threaded ends for quick, easy changes. Worm and gear mechanism runs in an oil bath to prolong its life and durability. $1, STOCK NO SPINDLE Spindle Lock Only One Wrench Needed for Changes Includes 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", and 4" Spindle Assemblies TABLE 45 Front, 15 Back 90 Quick Index Increased Spindle Access INTEGRATED STORAGE Designated Slots for Each Spindle and Insert Magnetic Strip for Wrenches Sealed Access Door JOSS-S Floor Spindle Sander, 1HP $1, JET JETTOOLS.COM 13

14 1632 DRUM SANDER Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required. Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position. Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port. Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage. Die cast drum carriage design is optimized for rigidity to provide years of consistent quality. Precision-flattened reinforced steel conveyor bed. Redesigned conveyor system pulls the workpiece through the sander instead of pushing. One rotation of the top-position handwheel adjusts the drum height by 1/16". The relative depth scale on the handwheel allows the user to reset and measure the depth for every project. $1, STOCK NO K K JWDS-1632 Drum Sander, 1.5HP 1PH 115V, Open Stand $1, Infeed/Outfeed Tables for JWDS-1632 & JWDS-1836 $ Casters, Set of 4 $ SANDSMART INFINITELY VARIABLE-FEED CONTROL PRODUCES THE ULTIMATE FINISH AT A RATE OF UP TO 10 FEET PER MINUTE AND PREVENTS MACHINE OVERLOAD 1836 DRUM SANDER Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload. Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required. Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position. Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port. Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage. Precision-flattened reinforced steel conveyor bed. Redesigned conveyor system pulls the workpiece through the sander instead of pushing. One rotation of the top-position handwheel adjusts the drum height by 1/16". $1, STOCK NO K K JWDS-1836 Drum Sander, 1-3/4HP 1PH 115V, Open Stand $1, Infeed/Outfeed Tables for JWDS-1632 & JWDS-1836 $ SANDSMART INFINITELY VARIABLE-FEED CONTROL PRODUCES THE ULTIMATE FINISH AT A RATE OF UP TO 10 FEET PER MINUTE AND PREVENTS MACHINE OVERLOAD 14 JET WOODWORKING

15 22-44 PRO DRUM SANDER SandSmart Infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. 22" wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance. Large cast-iron handwheel adjusts height at 3/32" per turn for precise sanding thickness control. $2, STOCK NO OSCILLATING DRUM SANDER Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning. SandSmart infinitely variable-feed control produces the ultimate finish at a rate up to 10 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. 1" of oscillating stroke. Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results. $2, STOCK NO K K OSC Oscillating Drum Sander, 1.75HP 1PH 115V $2, Infeed/Outfeed Tables, OSC, Plus $ PLUS BENCHTOP SANDER Infinitely variable-speed control produces the ultimate finish at a rate up to 12 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage. $ STOCK NO Plus Benchtop Sander, 1HP 1PH 115V $ Open Stand with Shelf for Plus $ JET JETTOOLS.COM 15

16 22-44 PLUS DRUM SANDERS SandSmart Infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. Precision-machined and balanced extruded aluminum drum is selfcooling to protect the surface being sanded from heat-damage. Adjustable drum height and downward pressure feature virtually eliminates snipe. Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control. One feed and one drive motor for superior sanding control. Sealed and permanently lubricated drum ball bearings for longer life. Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results. Abrasive take-up fasteners make changing abrasives quick and easy. On/off switch with overload protection is front-mounted for operator s convenience. Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time. $1, STOCK NO K SHOWN WITH OPTIONAL INFEED/OUTFEED TABLES $1, STOCK NO K K PLUS Benchtop Drum Sander, 1.75HP 1PH 115V $1, K PLUS Drum Sander, 1.75HP 1PH 115V, Open Stand $1, K PLUS Drum Sander, 1.75HP 1PH 115V, Closed Stand $1, Infeed/Outfeed Tables, OSC, Plus $ Casters, Set of 4 $ Infeed/Outfeed Tables, Pro $ Open Stand with Shelf for PLUS $ Closed Stand for PLUS $ S Closed Stand for OSC $ ALL SANDERS INCLUDE: BENCHTOP OSCILLATING SPINDLE SANDER 1" oscillating action reduces friction heat to protect wood and prolong sleeve life. Main spindle support runs on precision ball bearings and is oscillated by a heavyduty worm and gear mechanism for consistent performance. Oscillation gears run in a sealed lubricated box to prolong their life and durability. Table tilts to 45 to accommodate bevel sanding projects. Removable on/off safety switch prevents accidental start-up. Powerful 1/2HP induction motor easily handles the toughest sanding projects. $ STOCK NO JBOS-5, Benchtop Oscillating Spindle Sander, 1/2HP 1PH 115V $ Spindle Assembly 3" for JBOS-5 Sander $ JET WOODWORKING

17 OSCILLATING EDGE SANDER Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning which increases belt life. Quick release lever and tracking control dial are conveniently located for replacing and tracking belts. Belt platen is made from precision-ground steel plate for strength and durability. Graphite covered steel platen runs cooler increasing machine and belt life. Cast iron table moves up or down to provide exact workpiece positioning. 4" dust port hooks up to your dust collection system for efficient dust removal. Adjustable outer drum support table enables contour sanding. Tilting sanding head for sanding bevels, angles and flat surfaces. $1, STOCK NO OES-80CS, Oscillating Edge Sander, 1.5HP 1PH 115/230V $1, JMB-UMB Universal Mobile Base $89.99 COMBINATION 6" x 48" BELT/ 9" & 12" DISC SANDERS Large cast iron table has preset stops at 90 and 45 to let you use the belt sander vertically, horizontally, or anywhere in between. Dual thumbscrew belt tracking adjustment locks to keep belt on track during use. Graphite covered platen runs cooler increasing machine and belt life. Built-in casters for easy mobility JSG-96, Benchtop 6" x 48" Belt / 9" Disc Sander, 3/4HP 1Ph, 115V $ K JSG-96OS, 6" x 48" Belt / 9" Disc Sander with Open Stand, 3/4HP 1Ph, 115V $ K JSG-96CS, 6"x48" Belt/ 9" Disc Sander, 3/4HP 1PH 115V, Closed Stand $ JSG-6DC, 6" x 48" Belt / 12" Disc Sander, 1-1/2HP, 1Ph 115/230V $1, K JSG-6DCK, 6"x48" Belt / 12" Disc Sander, 1.5HP 1PH 115/230V, Open Stand $1, K JSG-6CS, 6" x 48" Belt / 12" Disc Sander with Closed Stand, 1.5HP 1PH 115/230V $1, OS-96, Open Stand for JSG-96 Sander $ CS-96, Closed Stand for JSG-96 Sander $ JSG-6, Open Stand for JSG-96 Sander $ JSG-6DC-CS Closed Stand with Casters for JSG-6 Sander $ $ STOCK NO K JET JETTOOLS.COM 17

18 SPINDLE SLEEVES Sanding Sleeves, 1/4" x 6", 60 Grit (4 pack) $ Sanding Sleeves, 1/4" x 6", 100 Grit (4 pack) $ Sanding Sleeves, 1/4" x 6", 150 Grit (4 pack) $ Sanding Sleeves, 3/8" x 6", 60 Grit (4 pack) $ Sanding Sleeves, 3/8" x 6", 100 Grit (4 pack) $ Sanding Sleeves, 3/8" x 6", 150 Grit (4 pack) $ Sanding Sleeves, 1/2" x 6", 60 Grit (4 pack) $ Sanding Sleeves, 1/2" x 6", 100 Grit (4 pack) $ Sanding Sleeves, 1/2" x 6", 150 Grit (4 pack) $ Sanding Sleeves, 5/8" x 6", 60 Grit (4 pack) $ Sanding Sleeves, 5/8" x 6", 100 Grit (4 pack) $ Sanding Sleeves, 5/8" x 6", 150 Grit (4 pack) $ Sanding Sleeves, 3/4" x 9", 60 Grit (4 pack) $ Sanding Sleeves, 3/4" x 9", 100 Grit (4 pack) $ Sanding Sleeves, 3/4 x 9", 150 Grit (4 pack) $ Sanding Sleeves, 1" x 9", 60 Grit (4 pack) $ Sanding Sleeves, 1" x 9", 100 Grit (4 pack) $ Sanding Sleeves, 1"x 9", 150 Grit (4 pack) $ Sanding Sleeves, 1-1/2" x 5-1/2", 60 Grit (4 pack) $ Sanding Sleeves, 1-1/2" x 5-1/2",100 Grit (4 pack) $ Sanding Sleeves, 1-1/2" x 5-1/2",150 Grit (4 pack) $ Sanding Sleeves, 1-1/2" x 9", 60 Grit (4 pack) $ Sanding Sleeves, 1-1/2" x 9", 100 Grit (4 pack) $ Sanding Sleeves, 1-1/2" x 9", 150 Grit (4 pack) $ Sanding Sleeves, 2" x 5-1/2", 60 Grit (4 pack) $ Sanding Sleeves, 2" x 5-1/2", 100 Grit (4 pack) $ Sanding Sleeves, 2" x 5-1/2", 150 Grit (4 pack) $ Sanding Sleeves, 2" x 9", 60 Grit (4 pack) $ Sanding Sleeves, 2" x 9", 100 Grit (4 pack) $ Sanding Sleeves, 2" x 9", 150 Grit (4 pack) $ Sanding Sleeves, 3" x 5-1/2", 60 Grit (4 pack) $ Sanding Sleeves, 3" x 5-1/2", 100 Grit (4 pack) $ Sanding Sleeves, 3" x 5-1/2", 150 Grit (4 pack) $ Sanding Sleeves, 3" x 9", 60 Grit (4 pack) $ Sanding Sleeves, 3" x 9", 100 Grit (4 pack) $ Sanding Sleeves, 3" x 9", 150 Grit (4 Pack) $ Sanding Sleeves, 4" x 9", 60 Grit (3 pack) $ Sanding Sleeves, 4" x 9", 100 Grit (3 pack) $ Sanding Sleeves, 4" x 9", 150 Grit (3 pack) $ JET WOODWORKING

19 22-44 PLUS, PRO, AND OSCILLATING DRUM SANDERS Ready-To-Wrap Abrasive, 36 Grit (3 pack) $ Ready-To-Wrap Abrasive, 60 Grit (3 pack) $ Ready-To-Wrap Abrasive, 80 Grit (3 pack) $ Ready-To-Wrap Abrasive, 100 Grit (3 pack) $ Ready-To-Wrap Abrasive, 120 Grit (3 pack) $ Ready-To-Wrap Abrasive, 150 Grit (3 pack) $ Ready-To-Wrap Abrasive, 180 Grit (3 pack) $ Ready-To-Wrap Abrasive, 220 Grit (3 pack) $ DRUM SANDER Ready-To-Wrap Abrasives, 36 Grit (4 pack) $ Ready-To-Wrap Abrasives, 60 Grit (4 pack) $ Ready-To-Wrap Abrasives, 80 Grit (4 pack) $ Ready-To-Wrap Abrasives, 100 Grit (4 pack) $ Ready-To-Wrap Abrasives, 120 Grit (4 pack) $ Ready-To-Wrap Abrasives, 150 Grit (4 pack) $ Ready-To-Wrap Abrasives, 180 Grit (4 pack) $ Ready-To-Wrap Abrasives, 220 Grit (4 pack) $ PLUS DRUM SANDER Ready-To-Wrap Abrasives, 36 Grit (4 pack) $ Ready-To-Wrap Abrasives, 60 Grit (4 pack) $ Ready-To-Wrap Abrasives, 80 Grit (4 pack) $ Ready-To-Wrap Abrasives, 100 Grit (4 pack) $ Ready-To-Wrap Abrasives, 120 Grit (4 pack) $ Ready-To-Wrap Abrasives, 150 Grit (4 pack) $ Ready-To-Wrap Abrasives, 180 Grit (4 pack) $ Ready-To-Wrap Abrasives, 220 Grit (4 pack) $ PLUS DRUM SANDER Ready-To-Wrap Abrasives, 60 Grit (4 pack) $ Ready-To-Wrap Abrasives, 80 Grit (4 pack) $ Ready-To-Wrap Abrasives, 100 Grit (4 pack) $ Ready-To-Wrap Abrasives, 120 Grit (4 pack) $ Ready-To-Wrap Abrasives, 150 Grit (4 pack) $ Ready-To-Wrap Abrasives, 180 Grit (4 pack) $ Ready-To-Wrap Abrasives, 220 Grit (4 pack) $29.99 READY TO CUT ABRASIVE STRIPS Ready-To-Cut Abrasive, 36 Grit $ Ready-To-Cut Abrasive, 60 Grit $ Ready-To-Cut Abrasive, 80 Grit $ Ready-To-Cut Abrasive, 100 Grit $ Ready-To-Cut Abrasive, 120 Grit $ Ready-To-Cut Abrasive, 150 Grit $ Ready-To-Cut Abrasive, 180 Grit $ Ready-To-Cut Abrasive, 220 Grit $ JET JETTOOLS.COM 19

20 NEW 15", 18", 20" STEEL FRAME BANDSAWS Large resaw capacity for cutting large pieces of wood, slicing veneers, and cutting book matched panels. Precision ground cast iron table for added stability and work support. Fence system features a micro-adjustable, dual-position side plate. Tool-less, independently adjustable, upper and lower ball bearing guides. Rigid, four-sided guide post with rack and pinion adjustment for optimum blade support. Easy-to-read blade tension scale can be viewed through upper door window. Single knob adjustment simplifies the blade tracking process. Blade tracking window provides clear view of blade during tracking. Heavy duty tensioning with quick release features three settings: full tension, partial tension, and full release. Cast iron trunnion for maximum support and stability. Slotted table allows for front blade removal. Cast iron handwheels and ergonomically designed knobs make adjustments smooth and easy. $1, STOCK NO JWBS-15, 15" Bandsaw, 1-3/4HP, 115/230V $1, JWBS-15-3, 15" Bandsaw, 3HP, 230V $1, JWBS-18, 18" Bandsaw, 1-3/4HP, 115/230V $2, JWBS-18-3, 18" Bandsaw, 3HP, 230V $2, JWBS-20-3, 20" Bandsaw, 3HP, 230V $2, JWBS-20-5, 20" Bandsaw, 5HP, 230V $3, *20" MODELS ONLY Heavy Duty Universal Mobile Base $ JET WOODWORKING

21 14" BANDSAWS Cast iron work table. Cast iron frame construction for strength, rigidity, and reduced vibration. 4" dust port allows for direct connection of dust collection system. $1, STOCK NO K K JWBS-14CS, 14" Bandsaw, 1HP 1PH 115/230V, Closed Stand $ K JWBS-14DXPRO 14" Deluxe Bandsaw, 1.25HP 1PH 115/230V $1, JWBS-14CS Miter Gauge for 14" Bandsaws $ Bandsaw Blade, Scroll, 67-1/2 x 1/8 x x 18TR $ Bandsaw Blade, Resaw, 67-1/2 x 1/2 x x 4HK $ Bandsaw Blade, General Purpose, 67-1/2 x 1/2 x. 025 x 6HK $ SP-14, 3 Speed Kit for JWBS-14 $ Bandsaw Blade, General Purpose, 67-1/2 x 1/4 x.025 x 6SK $ Woodworking Bandsaw Fence, Fits 14" x 14" Tables $ Woodworking Bandsaw Fence, Fits 15" x 15" Tables $ Miter Gauge for JWBS-16, -18, $ Blade Bearing Guides, Carter-Style for 14" Bandsaws $ Miter Gauge for 12" Bandsaw $69.99 JWBS-14DXPRO Miter Gauge for 14" Bandsaws $49.99 *710116K ONLY JET JETTOOLS.COM 21

22 10" BENCHTOP BANDSAW Compact benchtop design allows for easy transport to different shop locations. Rigid steel stand allows bandsaw to transition from the benchtop to the floor. Heavy-Duty 1/2 HP induction motor for various cutting applications. Poly-V drive system maximizes power transfer from motor to blade and reduces vibration. Upper and lower ball bearing blade guides provide blade stability. Quick release blade tension makes changing and re-tensioning the blade fast, easy, and consistent. Aluminum extruded fence ensures smooth sliding action and straight, precise cuts JWB-10, 10" Open Stand Bandsaw $ $ STOCK NO JET WOODWORKING

23 SHAPERS Multiple-speeds let you select the best speed and torque for different cutter diameters. Large, precision ground cast iron table provides a durable work surface. Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs. Reversible spindle speeds for diverse shaping jobs. Starting pins for irregular shaping. Extra large chrome handwheel is conveniently located for fast, easy, and accurate spindle height adjustments. 4" Dust port built into fence for convenient hookup to any dust collection system. Spindle lock for safe and easy cutter set up. Spindle height scale. $2, STOCK NO $2, STOCK NO JWS-25X, Shaper, 3HP 1PH 230V, 1/2" & 3/4" Spindles $2, JWS-35X3-1, Shaper, 3HP 1PH 230V $2, JWS-35X5-1, Shaper, 5HP 1PH 230V $3, AVAILABLE FOR ALL SHAPERS JMB-UMB Universal Mobile Base $89.99 JWS-25CS /4" Spindle for JWS-25CS Shaper $49.99 JWS-25X mm Spindle for JWS-25X Shaper $ /2" Spindle Assembly for JWS-25X Shaper $ /4" Spindle Assembly for JWS-25X Shaper $ " Spindle for JWS-25X Shaper $ /4" Collet Set for JWS-25X Shaper $ /2" Collet Set for JWS-25X Shaper $69.99 JWS-35X mm Spindle for JET 35X Shaper $ /2" Spindle for JET 35X Shaper $ /4" Spindle for JET 35X Shaper $ " Spindle for JET JWS-35X Shaper $ $ /4" Spindle for JWS-25CS Shaper $49.99 JET JETTOOLS.COM 23

24 10" & 12" BENCHTOP COMPOUND MITER SAWS Innovative Green XACTA Laser provides high visibility for precision cutting. Heavy-Duty 15 amp motor with brake for various cutting applications. Up-front controls for safety and ease of use. $ STOCK NO H H H H ½ -POPULAR MECHANICS $ STOCK NO B3NCH TM 10" MITER SAW JMS-10CMS, 10" Compound Miter Saw, Green Laser $ B3NCH TM 10" SLIDING DUAL BEVEL MITER SAW JMS-10SCMS, 10" Sliding Dual Bevel Miter Saw, Green Laser $ B3NCH TM 12" SLIDING DUAL BEVEL MITER SAW JMS-12SCMS, 12" Sliding Dual Bevel Miter Saw, Green Laser $ JMS-10SCMS JET Extension Wings for 10" Miter Saw $ JET WOODWORKING

25 10" PROSHOP II TABLE SAWS WITH RIVING KNIFE Newly designed arbor lock to change blades quickly and easily. Quick release riving knife for hassle free riving knife changes. Improved dust shroud around blade for greater dust collection. Convenient, magnetic paddle switch for the safest operation possible. Innovative single belt design for easier belt tensioning and reduced vibration. Motor reset switch conveniently relocated. to the power switch, instead of the motor. Dado insert and low profile riving knife included. Redesigned guard for better protection and ease of use. On board storage for all included accessories. CSA certified. $1, STOCK NO K NEW K JPS-10 10" Proshop 1.75HP 1PH 115V. 30" Fense System, Steel Wing w/ Riving Knife $1, K JPS-10 10" Proshop 1.75HP 1PH 115V. 52" Fence System, Steel Wing w/ Riving Knife $1, K JPS-10 10" ProShop 1.75 HP 1 PH 115V 30" Fence System, Cast Wing w/ Riving Knife $1, K JPS-10, 10" ProShop 1.75HP 1PH 115V, 52" Fence System, Cast Wing w/ Riving Knife $1, K JPS-10, 10" ProShop 1.75HP 1PH 230V, 30" Fence System, Steel Wing w/ Riving Knife $1, K JPS-10, 10" ProShop 1.75HP 1PH 230V, 52" Fence System, Steel Wing w/ Riving Knife $1, K JPS-10, 10" ProShop 1.75HP 1PH 230V, 30" Fence System, Cast Wing w/ Riving Knife $1, K JPS-10, 10" ProShop 1.75HP 1PH 230V, 52" Fence System, Cast Wing w/ Riving Knife $1, ProsShop II Dado Insert $ JMB-UMB-HD Heavy-Duty Universal Mobile Base $ Mobile Base Extension Kit $ " & 12" DELUXE XACTA TABLE SAWS 30" or 50" Commercial XACTA Fence II with T-square design. Quick release riving knife greatly reduces binding/kickback risk. Push button arbor lock for rapid blade change. Shrouded blade increases dust collection efficiency. Standard 11" left and right cast iron extension wings provides the largest table surface in its class. Poly-V drive belt system delivers quiet, efficient operation. $2, STOCK NO PK PK XACTA Saw Deluxe 3HP 1PH 230V, 30" Fence System $2, PK XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System $2, PK XACTA Saw Deluxe 5HP 1PH 230V, 30" Fence System $2, PK XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System $2, PK XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System, Downdraft Table $2, PK XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System, Downdraft Table $3, PK JTAS-12-DX, 12" Xacta Saw, 5HP 1PH $4, Dado Insert for 10" Deluxe Xacta Saw $ Riving Knife, Thin Kerf, for Deluxe XACTA Saw $ Riving Knife, Low Profile, for Deluxe XACTA Saw $ Riving Knife, Low Profile Thin Kerf, for Deluxe XACTA Saw $39.99 JET JETTOOLS.COM 25

26 NEW ROUTER TABLE All components sold individually for maximum customizability. Cast Iron or MDF top available, giving options for durability and affordability. Precision Router Lift with above the table adjustments for ease of use. Versatile fence system with a variety of feather board and flip stop add-ons. Heavy duty stand with router bit storage and an integrated mobile base. Dust collection system that features an enclosed dust box around the router as well as dust collection in the fence at the point of cut. On-board tool storage for miter gauge and other accessories. Micro adjust fence options for maximum accuracy when routing. $1, STOCK NO WK CK Router Lift with Cast Table Kit $1, WK Router Lift with MDF Table Kit $1, JRL-912 Router Lift $ " x 24" Fence Assembly $ " x 24" Cast Iron Table $ " x 24" MDF Table $ Floor Stand (with Switch and Miter Gauge) $ Dust Collection Box $ Flip Stop $ Fine Fence Adjusters (set of 2) $ Vertical Featherboards (2) $ Power Switch $ Phenolic Inserts (ZC,6.4,12.7,30,63.5mm) $ Horizontal Featherboards (2) $ JET WOODWORKING

27 6" JOINTERS Powerful 1HP motor handles the toughest tasks. Two-way tilting fence with positive stops at 45 and 90 to handle bevel operations. Exclusive front-mounting table adjustment handwheels make quick, easy, and accurate corrections. Industrial push-button controls are conveniently placed for easy access. Built-in dust chute with 4" port connects to your collection system for efficient dust/chip disposal. Center fence controls are conveniently mounted to allow quick adjustments. Powerful 1HP motor easily handles the toughest jointing tasks. Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability. $1, STOCK NO DXK DXK JJ-6CSDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Quick-Set Knives $1, DXK JJ-6HHDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Helical Head $1, K JWJ-8CS 8" Jointer, 2HP 1PH 230V $1, K JWJ-8HH 8" Jointer, 2HP 1PH 230V, Helical Head $2, JJ-6CSDX Knives for 6" Jointer (set of 3) $ Knives for 8" Jointer (set of 3) $79.99 JJ-6HHDX Inserts for Helical Cutter Head (set of 10) $ JPB-36 Jointer Push Block $9.99 JET JETTOOLS.COM 27

28 8" JOINTERS Available with high speed steel knives or helical cutterhead for a superior finish. Extra-long, heavy-duty cast iron infeed and outfeed tables with precision machined finish. Large chrome handwheels and easy-to-reach locks make table adjustments less of a hassle. Tall, rigid fence provides added support. Two-way tilting fence with positive stops at 45 and 90 to handle bevel operations. Magnetic controls provide long life and reliability, protecting the motor from potential electrical supply issues. Built-in 4" dust chute connects to your collection system for efficient dust/chip disposal. Fence adjustment levers are conveniently located in the center of the fence for quick access. Powerful 2HP motor easily handles the toughest jointing. $2, STOCK NO K STOCK NO. DESCRIPTION SALE PRICE K JWJ-8CS, 8" Closed Stand Jointer, 2HP, 1PH, 230V $1, K JWJ-8HH, 8" Helical Head Jointer, 2HP, 1PH, 230V $2, JWJ-8CS Knives for 8" Jointer (set of 3) $ JMB-UMB Universal Mobile Base $89.99 JWJ-8HH Inserts for Helical Cutter Head (set of 10) $ JET WOODWORKING

29 15" PLANERS Heavy-duty cast iron and steel construction for added strength and durability. Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs. Large, cast iron, precision ground table for precise workpiece support. Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power. Built-in casters for easy mobility. Large handwheel with positive gear drive allows for quick and accurately table adjustments. Heavy-duty table locks keep the table secure during use. Angled 4" dust port keeps your dust hose out of the way. Heavy-duty steel closed stand with lockable casters for increased portability. Magnetic controls provide long life and reliability. $2, STOCK NO JWP-15DX: 15 CS Planer with Quick Change Knives $2, JWP-15HH, 15" Planer, Helical Head $2, JWP-16OS: 16" 3HP OS Planer $1, JWP-15DX JWP-13K, Knife Set for JWP-13DX $ JWP15HI-K, 15" Planer Knife Set (3) $ Quick Change Knife Set for JET 15" Planers $ JWP-16K, Knife Set for JET 16" Planer $ JWP-12K, Knife Set for 12-1/2" Portable Planer $ Digital Readout for 15" & 20" Planers $ JWP-15HH JWP20H-K, Knives for JWP-20HH Planers (set of 3) $ Digital Readout for 15" & 20" Planers $ JWP-13K, Knife Set for JWP-13DX $69.99 JET JETTOOLS.COM 29

30 16" PLANER Cutter head with three high-speed steel knives locks firmly in place to prevent movement while in use. Heavy-duty cast iron and steel construction for added strength and durability. Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs. Large, cast iron, precision ground table for precise workpiece support. Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power. Surge infeed and outfeed rollers give your workpiece maximum support during planing operations. Large handwheel with positive gear drive allows for quick and accurate table adjustments. Angled 4" dust port keeps your dust hose out of the way. Heavy-duty steel wide base open stand with casting pads provides support and stability of the tool during use. Magnetic controls provide long life and reliability. $1, STOCK NO JWP-16OS, 16" Planer, 3HP 1PH 230V, Open Stand $1, Knives for 16" Planer (set of 3) $ JMB-UMB-HD Heavy-Duty Mobile Base $ JET WOODWORKING

31 20" PLANERS Helical cutterhead with indexable carbide inserts for a superior finish and quieter cut. Heavy-duty cast iron and steel construction for added strength and durability. Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs. Large cast iron precision ground table for precise workpiece support. Positive gear drive moves table quickly and accurately. Cast iron infeed and outfeed tables come with the machine. Large handwheel with positive gear drive allows for quick and accurate table adjustments. 1/16" increment height scale lets you make the most precise adjustments for fine cuts. 5" dust port provides efficient chip and dust collection. One-piece welded steel base offers solid support and stability. Magnetic controls provide long life and reliability. $3, STOCK NO JWP-208-1, 20" Planer, 3HP 1PH 230V $2, JWP-208HH, 20" Planer, 5HP 1PH 230V, Helical Head $3, JWP Knives for JWP-208 Planers (set of 3) $ Digital Readout for 15" & 20" Planers $ JMB-UMB-HD Heavy-Duty Mobile Base $ JWP-208HH Inserts for Helical Cutter Head (set of 10) $ Digital Readout for 15" & 20" Planers $ JMB-UMB-HD Heavy-Duty Mobile Base $ JET JETTOOLS.COM 31

32 8" AND 10" BENCHTOP PLANER/JOINTER Combination benchtop jointer & planer provides a 2 in 1 machine to maximize workspace. Compact bench top design fits conveniently in small shop environments. 13 amp motor for various cutting applications. Two high speed steel knives for precise, smooth cuts. Oversized, ergonomic knobs provide ease of use and maximum control. Large aluminum extruded fence. Outfeed table with height adjustment supports long workpieces and helps reduce snipe. $ STOCK NO $ STOCK NO JJP-8BT, 8" Jointer / Planer Combo $ JJP-10BTOS, 10" Jointer / Planer Combo w/ Stand $ JJP-8BT Knives for 8" Jointer/Planer (set of 2) $ Knives for 10" Jointer/Planer (set of 2) $39.99 JJP-10BTOS Stand for 8" Jointer/Planer $ Knives for JJP-12 (set of 3) $ JET WOODWORKING

33 12" PLANER/JOINTER COMBINATION MACHINE Three high-speed steel knife cutterhead, or helical head option, provide rapid cutting and superior finishes. Parallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments. Extra large aluminum extruded fence with centered controls for quick adjustments. Extremely quick changeover between jointing and planing functions (fence does not need to be removed). Powerful 3HP induction motor easily handles the toughest jointing and planing tasks. Built-in dust chute with 4" dust port used for both jointing and planing operations. Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability. Large handwheel for quick and precise adjustments of planer table. Heavy-duty cast iron tables with a machined finish to ensure accuracy and flatness. $4, STOCK NO JJP-12, 12" Planer/Jointer, 3HP 1PH 230V $2, JJP-12HH, 12" Planer/Jointer, 3HP 1PH 230V, Helical Head $4, JJP Knives for JJP-12 (set of 3) $59.99 JJP-12HH Inserts for Helical Cutter Head (set of 10) $64.99 JET JETTOOLS.COM 33

34 13" PLANER/MOLDER Cast iron table and base provide strength and reduce vibration during use. Four precision-ground column design feature adds stability when raising and lowering the table. Three-knife cutterhead design produces a superior finish in either application. Two speed gear box has feed rates set for optimum planing and molding results. Molding cutterhead accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planing knives to save you set-up time. Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood. $1, STOCK NO JPM-13CS, 13" Planer/Molder, 1.5HP 1PH 115/230V $1, Knife Set for JPM-13 Planer/Molders (set of 3) $99.99 PARALLEL CLAMPS Patented design provides precision and power with exact 90 clamping at up to 1,000 lbs. pressure. Precision-Rule measurement system provides a consistent setup and quick identification of opening capacity. Slide-Glide trigger makes precise adjustments rapidly and easily. Ergonomic SUMOGRIP handle integrated. with soft grip for added comfort and increased torque. $49.99 STOCK NO Parallel Framing Block Kit (Set of 4) $ Parallel Clamp Framing Kit $ " Parallel Clamp $ " Parallel Clamp $ " Parallel Clamp $ " Parallel Clamp $ " Parallel Clamp $ " Parallel Clamp $ " Parallel Clamp $ " Parallel Clamp $ Parallel Clamp Bench Dog (4 Pack) $ Parallel Clamp Moveable Foot (Set Of 4) $ JET WOODWORKING

35 JET MOBILE BASES FIND THE MOBILE BASE SETUP THAT IS RIGHT FOR YOUR PRODUCT $89.99 STOCK NO $ STOCK NO $89.99 STOCK NO MOBILE BASES STOCK NO. DESCRIPTION JWBS-14SF 14" Steel Frame Bandsaw, 1-3/4HP JWBS-14SF-3 14" Steel Frame Bandsaw, 3HP B JWBS-16B, 16" Bandsaw, 1.5HP 1PH 115/230V A K JWBS-14OS, 14" Bandsaw, 3/4HP 1PH 115/230V, Open Stand JWBS-14CS, 14" Bandsaw, 1HP 1PH 115/230V, Closed Stand K JWBS-14DXPRO 14" Deluxe Bandsaw, 1.25HP 1PH 115/230V JWS-22CS, Shaper, 1-1/2HP 1PH 115/230V, 1/2" & 3/4" Spindles JWS-25X, Shaper, 3HP 1PH 230V, 1/2" & 3/4" Spindles JWS-35X3-1, Shaper, 3HP 1PH 230V JWS-35X5-1, Shaper, 5HP 1PH 230V OES-80CS, Oscillating Edge Sander, 1.5HP 1PH 115/230V DXK DXK K K JJ-6CSDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Quick-Set Knives JJ-6HHDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Helical Head JJ-8CS, 8" Jointer, 2HP 1PH 230V JJ-8HH, 8" Jointer, 2HP 1PH 230V, Helical Head B JWBS-18QT, 18" Bandsaw, 1.75HP 1PH 115/230V, Quick Tension & & B B B K K PK PK JWBS-18QT-3, 18" Bandsaw, 3HP 1PH 230V, Quick Tension JWBS-20QT-3, 20" Bandsaw, 3HP 1PH 230V, Quick Tension JWBS-20QT-5, 20" Bandsaw, 5HP 1PH 230V, Quick Tension JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 30" Fence System, Steel Wing w/riving Knife JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 30" Fence System, Cast Wing w/riving Knife XACTA Saw Deluxe 3HP 1PH 230V, 30" Fence System XACTA Saw Deluxe 5HP 1PH 230V, 30" Fence System JWP-16OS, 16" Planer, 3HP 1PH 230V, Open Stand JWP-208-1, 20" Planer, 3HP 1PH 230V JWP-208HH, 20" Planer, 5HP 1PH 230V, Helical Head PK PK PK PK K K XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System, Downdraft Table XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System, Downdraft Table JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 52" Fence System, Steel Wing w/riving Knife JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 52" Fence System, Cast Wing w/riving Knife JET ROLLER STAND USE THIS VERSATILE ROLLER STAND TO SUPPORT STOCK AS YOU WORK ON PROJECTS THROUGHOUT THE SHOP. $44.99 STOCK NO JET JETTOOLS.COM 35

36 WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018 FOR MORE INFORMATION VISIT JETTOOLS.COM VISIT JETTOOLS.COM FOR MORE INFORMATION PRICES EFFECTIVE JANUARY 1ST - JUNE 30TH, 2018 OFFER AVAILABLE AT PARTICIPATING DEALERS ONLY WHILE SUPPLIES LAST. JET reserves the right to correct any pricing, product specifications or image discrepancies JET All Rights Reserved. Printed in the U.S.A. The color WHITE is a registered trademark of JET Tools. STAND BEHIND YOUR WORK