50-200R M1 Aluminum T-fence rip fence system. $1, reg. $1, * Limited quantities, while supplies last

Transcription

1 GENERAL T fence system* Made in Canada 0-200RC30 M1 General T fence system (F36T28) with 30 cutting capacity. $1,4. reg. $1, EXBC10 $3. reg. $ R M1 Aluminum T-fence rip fence system. $1,1. reg. $1, HP CABINET SAW (left tilt) Quick release combination riving style splitter and blade guard with anti-kickback pawls and a second European style riving knife also included. Large 27 x 44 cast-iron table with two extension wings. Cast-iron cabinet mounted trunnions. Dual voltage motor pre-wired for 230 V operation. 7-00T $629. reg. $ MEP $89. reg. $702. * Limited quantities, while supplies last. # ARM PIVOTS AWAY OR REMOVES IN SECONDS. 10 OVERARM BLADE COVER SYSTEM WITH DUST COLLECTION CAPABILITY Unique design mounting bracket: pivots arm away or removes completely in seconds. 4 main boom and 3 inner boom. Flexible 3 hose connects the blade cover to the boom. INCLUDED # # $19. reg. $ TILTING HEAD /8 HOLLOW CHISEL MORTISER ¼, / 16, 3 / 8 & ½ chisel & bit sets included. Includes sleeves for both / 8 and ¾ chisel shanks. Features a tilting head (30 left & right) with a 180 swivel. ½ HP TEFC motor. promotion Distributed by: # ROUTER TABLE PACKAGE WITH MDF TABLE (floor model) KIT INCLUDES: 24 x 32 MDF table (40-049). Tubular steel stand with on/off switch (40-08). Deluxe router fence (40-080). 9 ¼ x 11 ¾ phenolic router plate (40-114). FALL / WINTER PIECE - 8 DELUXE DADO BLADE SET (2) 24 tooth exterior blades. Maximum 6000 rpm. Makes 1 /8 to 13 / 16 grooves. Anti-kickback design. Convenient & sturdy wooden storage case included. Prices are in effect from September 1 st, 2014 to February 28 th, 201 We reserve the right to correct any typographical and pictorial errors without notice.

2 7-10 DRILL PRESSES $ M1 Bench top model $349. reg. $ reg. $ M M1 Floor model $ VARIABLE SPEED DRILL PRESS reg. $ Bench-top model /8 chuck with key & convenient on- board chuck key holder. Sturdy design with cast-iron head, base, and table. Simple hand lever controlled mechanical variable speed from 00 to 3000 rpm. Easy to use see-through flipup chuck guard included. Built-in laser pointer. 1/ 3 HP industrial-quality, 120 V motor. 14 DRILL PRESSES /8 chuck with key, laser pointer & see-through chuck guard included. Rotating, 4 tilting, crank-operated worktable with quick release clamp. Forced opening line interrupter switch, requires machine restart in case of power failure or circuit interruption. Built-in lamp illuminates the drilling area (bulb not included). 12 spindle speeds: 280 to 3000 rpm. ½ HP motor. 7-1 M M M M1 reg. $7.00 reg. $69.00 reg. $1, reg. $1, ELECTRONIC VARIABLE SPEED DRILL PRESS 20 VARIABLE SPEED DRILL PRESS $49. $ VARIABLE SPEED 1 VARIABLE SPEED DRILL PRESS DRILL PRESS /8 keyless chuck. Adjustable 2 LINE INTERRUPTER SWITCH $1,. /8 chuck with key. Adjustable spindle tension return spring. Sturdy design with cast-iron head, base, and table. Simple hand lever controlled mechanical variable speed from 280 to 2100 rpm. Easy to use see-through flip-up chuck guard included. 1/ 2 HP industrial-quality, 120 V motor. spindle tension return spring. Sturdy design with cast-iron head, base, and table. Simple hand lever controlled mechanical variable speed from 280 to 2100 rpm. Easy to use see-through flip-up chuck guard included. Built-in laser pointer. 3/ 4 HP industrial- quality, 120 V motor. /8 chuck with key. Electronic inverter variable control adjusts spindle speed from 300 to 3200 rpm. Adjustable spindle tension return spring. Sturdy design with cast-iron head, base, and table. Easy to use see-through flip-up chuck guard included. Built-in laser pointer. 1 HP industrial-quality, 120 V motor. $9. /4 chuck with key. Adjustable spindle tension return spring. Sturdy design with cast-iron head, base, and table. mple hand lever controlled mechanical variable speed from 280 to 2100 rpm. Easy to use see-through flip-up chuck guard included. 1 HP industrial-quality, 120 V motor. 3

3 LINE INTERRUPTER SWITCH LINE INTERRUPTER SWITCH 7-0 M RC M M M1 $639. reg. $ $79. $49. reg. $ $99. reg. $1, reg. $ RADIAL ARM DRILL PRESS / 8 chuck with key & see-through chuck guard included. 3 1 / 8 spindle travel. 9 spindle speeds: 29 to 380 rpm. Table swivel 360. Forced opening line interrupter switch, requires machine restart in case of power failure or circuit interruption. Table extension provides additional support. ½ HP motor $149. reg. $ DRILL PRESS / 8 chuck with key, laser pointer & see-through chuck guard included. Rotating, 4 tilting, crank-operated worktable with quick release clamp. Forced opening line interrupter switch, requires machine restart in case of power failure or circuit interruption. 12 spindle speeds: 340 to 2800 rpm. ¾ HP motor. 22 DRILL PRESS ¾ chuck with key, laser pointer & see-through swing-away chuck guard with safety Interlock shuts off automatically when opened. Large front mounted paddle style stop switch with lock-out safety feature to prevent unintentional start-up. Industrial 1 HP motor M1 $1,779. reg. $2, EXTENDED STROKE DRILL PRESS ¾ chuck with key, laser pointer & see-through chuck guard included. Extra long 6 quill stroke drills deeper than most drill presses. Large front mounted paddle style stop switch with lock-out safety feature to prevent unwanted or unintentional start-up. 12 spindle speeds: 2 to 270 rpm. 1 HP motor. Shown with drill bits (not included) MORTISING ATTACHMENT KIT Convert almost any drill press into a mortiser in minutes! Contents: Mounting hardware. Cast-iron chisel holder. Guide fence with workpiece hold down. 4 of the most commonly used mortising chisel and bit sets with / 8 bit shank x ¼, / 16, 3 / 8 & ½. Includes 2,, 8, 60, 6 and 66 mm adapter bushings $14. reg. $2. 40 $127. reg. $ LASER POINTER FOR DRILL PRESS HEAVY-DUTY DRILL PRESS CHUCK GUARD 70-1 ( mm): for 7-02, 7-030, 7-12, 7-10, & (6 mm): for & (7 mm): for 7-260, 7-00 & SPINDLE BORING MACHINE Fully adjustable fence system with easy to read scales in both inches and metric. Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel boring patterns. Open base steel stand included. 340 rpm spindle speed. Powerful 1 ½ HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates. 3

4 HEAVY-DUTY UNIVERSAL MOBILE BASE 0-7 M1 $3,69. 2 heavy-duty 3 wheels. 2 heavy-duty swivel casters. reg. $4, Heavy-duty 3 wheels. Rubber levelling feet (2). Adjustment in 1 increments LB 12 RADIAL ARM SAW Powerful 2 HP 220V single phase TEFC motor. Cast-iron frame, heavy steel column and sturdy stand. Tilting pivoting head allows for crosscuts, bevels, miters & rip cuts. Precision adjustable indexing with positive stops at 90º, 4º and 22.º. ⅝ arbor with 1 spacer bushing included. UNIVERSAL MOBILE BASE 00 LB LOAD CAPACITY $129. $67. reg. $17.00 SCROLL SAWS LOAD CAPACITY reg. $9.00 EX-16 (16 ) EX-21K (21 ) $8. $79. reg. $ reg. $1,104.4 EX-30K (30 ) $1,029. EX-21K (21 ) reg. $1, SCROLL SAW EX-30K (30 ) FOOT SWITCH & STAND INCLUDED WITH MODELS EX-21K & EX-30K ONLY Upper and lower blade guard assembly helps prevent accidental hand contact with the blade. Dust collector table kit for direct dustextraction hook-up. Switch protection device to prevent unintentional start-up. Head tilts 30 left and 4 right, tilting the blade, not the table. 2 cutting thickness capacity. Variable speed of 400 to 1400 strokes/minutes. UPPER & LOWER BLADE GUARD ASSEMBLY SWITCH PROTECTION DEVICE 21 & 30 SCROLL SAWS Upper and lower blade guard assembly helps prevent accidental hand contact with the blade. Dust collector table kit for direct dust-extraction hook-up. Switch protection device to prevent unintentional start-up. Foot switch & stand included. Head tilts 38 left and 4 right, tilting the blade, not the table. 2 Cutting thickness capacity. Variable speed of 400 to 10 strokes/minutes. 4 DUST COLLECTOR HOOK-UP KIT

5 SAWS MOBILE BASE FOR TABLE SAWS WITH EXTENSION TABLE AND LEGS $189. reg. $ LBS CAPACITY Deluxe extension table & support legs included 0-270KDL M1 $2,. reg. $3, HP CABINET SAW (left tilt) Quick release combination riving style splitter and blade guard with anti-kickback pawls and a second European style riving knife also included. Extra large precisionground 42 x 29 cast-iron table including two 11 full cast-iron extension wings. Seethrough blade guard with built-in dust outlet. Cabinet mounted magnetic switch with overload protection. High precision fence system with 0 long rails. 10 COMBINATION BLADE - 40 TOOTH TENONING JIG Perfect fit on right or left tilt table saws. $13. $149. reg. $ reg. $ CUTTING CAPACITY GENERAL-T FENCE SYSTEM* Made in CANADA 36 extension table & support legs included (with the purchase of 0-27RLK only) 0-27RLK M1 With aluminum fence and 0 rails (EXF-30S-R0) $2,1. reg. $2, HP CABINET SAW (left tilt) Powerful 3 HP motor with multi-groove V-belt. Combination riving style splitter and see-through blade guard with anti-kickback pawls, and a second European style riving knife also included. Large precision-ground 44 x 27 cast-iron table with two extension wings. Magnetic safety switch with large stop button. #0-6A CAST-IRON BASE FOR ADDED STABILITY General T fence system* Made in Canada 0-27RC30 M1 General T fence system (F36T28) with 30 cutting capacity. $1,7. reg. $2, * Limited quantities, while supplies last. F36 T28 $334. reg. $ EXCALIBUR MITER GAUGE ly designed pointer/angle indicator provides better visibility to set precision fractional angles. Sliding stop flips up out of the way when not in use. Extension arm assembly makes it possible to quickly and easily find any angle and lock it securely in place. Quickly reverse the guide for left or right hand use. 0-EB3 $119. reg. $ POINTER/ ANGLE INDICATOR * Limited quantities, while supplies last. AVAILABLE IN CANADA ONLY Outrigger slider support included (with the purchase of 0-60A M1 only) 0-60A M1 $6,3. reg. $7, SCORING SAW WITH BUILT-IN SLIDING TABLE (right tilt) Can be used as a regular saw, but includes a built-in sliding table for stable effortless crosscuts & a separate scoring blade for chip-free cuts in melamine & laminates. Anodized European style sliding table. Separate safety lock out switch for main motor & scoring motor. Heavy-duty cabinet-mounted cast-iron trunnions. Precision-built rip fence system with 0 guide rails. 3 HP motor. Instructional DVD included SLIDING TABLES Fits on most 10 to 14 table saws. Easy to adjust, extruded aluminum miter fence for accurate miters from 0º to 4º. Cut up to 49 * (0-SLT40P) or 72 * (0-SLT60P) with the crosscut fence positioned at the rear of the table. Crosscut and miter up to 28 * (0-SLT40P) or 49 * (0-SLT60P) with the fence at the front of table. * Depending on the positioning of the main mounting bracket on your saw. 0-SLT40P 0-SLT60P $1,249. $1,49. reg. $1, reg. $1,

6 $189. reg. $ $244. reg. $ X M1 $4,6. reg. $,20.00 INCLUDED SOFTWARE OPTIONAL DUST COLLECTION ADAPTER KIT INCLUDED SOFTWARE OPTIONAL STAND X $1,19. 1 X 20 CNC CARVING MACHINE reg. $1,37.00 Pendant style hand-held controller. Easy to learn i-picture programming software. Large user-friendly control panel with LCD display, keypad and USB 2.0 port for easy file transfers. Positional accuracy up to & variable cutting speeds up to 118 per minute. Aluminum table with integrated hold down clamps. Tool kit with starter cutting tools included. No external operating PC required. Unlimited and ongoing technical support. OPTIONAL SAFETY ENCLOSURE * Limited quantities, while supplies last. Ideal for educational users. Impact resistant LexanTM. Safety interlock door (auto-shut-off). BANDSAWS Deluxe rip fence system M M M B M1 reg. $ reg. $ reg. $79.00 $289. MULTI-SIZE DUST PORT FITS 4, 3, OR 2 HOSE 10 WOOD CUTTING BANDSAW Sturdy welded steel frame & precision balanced wheels with replaceable tires. Miter gauge with auxiliary aluminum crosscut fence included. Cutting speed: 2920 fpm. Smooth running durable ½ HP motor. 6 $9. $69. $1,6. reg. $2,07.00 MULTI-SIZE DUST PORT FITS 4, 3, OR 2 HOSE 12 WOOD CUTTING BANDSAW 14 WOOD Precision easy-adjust blade DELUXE 14 WOOD guide blocks included. Two cut- CUTTING BANDSAW CUTTING BANDSAW ting speeds (1443 & 310 lin. fpm) Deluxe dual-position rip fence for excellent results in either hard system. Two cutting speeds ( resaw capacity. Safety foot brake stops blade & motor. or soft woods. Extra-large 21 ½ x & 3280 lin. fpm) for excellent re1 ¾ cast-iron table. Deluxe sults in either hard or soft woods. Dynamically balanced heavy dual-position rip fence system. Smooth running heavy-duty 1 HP motor. Extra-large 21 ½ x 1 ¾ cast-iron table. Smooth running heavy-duty 1 ½ HP motor. cast-iron wheels. 2 cutting speeds, 2300 & 320 fpm, for excellent results in either hard or soft woods. ¾ blade included. 1 ½ HP motor.

7 1-82 M1 $179. reg. $ LOW SPEED BENCH GRINDER Low 172 rpm. Double sealed ballbearing construction. Adjustable cast tool rests. ½ HP motor $104. reg. $ POWER FEEDERS M1 $649. reg. $ rollers. 4 speeds: 20, 26, 33 & 43 fpm. ¼ HP motor M1 $149. reg. $ VARIABLE SPEED BENCH GRINDER Variable speed from 2000 to 340 rpm for grinding or sharpening. Double sealed ball-bearing construction. 110 V motor. HEAVY-DUTY 34 STAND FOR 6, 8 & 10 BENCH GRINDERS M1 $9. reg. $1, rollers. 4 speeds: 9., 1, 2 & 38 fpm. ¼ HP motor. Deluxe rip fence system M M1 $3,4. reg. $4, Deluxe rip fence system $4,1. reg. $, UPPER AND LOWER DUAL BAKELITE BLOCK AND 7 BEARING, DELUXE BLADE GUIDE SYSTEM M1 $9. reg. $1, Deluxe rip fence system 14 WOOD CUTTING BANDSAW ⅜ blade included. Cast-iron frame & precision-balanced aluminum wheels with replaceable rubber tires. Rip fence & miter gauge included. 2 blade speeds: 1800 & 3000 fpm. Blower device. 1 HP motor. OPTIONAL RISER ATTACHMENT For M1 only $87. reg. $ A $149. reg. $ WOOD / METAL BANDSAW Electronic variable speed digital inverter. Dynamically balanced cast-iron wheels. Solid, high quality, precision machined, ribbed cast-iron table with left and 4 right tilting action. Blade speeds: 40 to 3600 fpm (wood) & 100 to 60 fpm (metal). 2 HP motor. DELUXE 22 HEAVY-DUTY WOOD CUTTING BANDSAW ¾ blade included. Safety foot brake simultaneously stops blade and motor. Solid cast-iron table with heavy-duty onepiece trunnion and 0 to 4 right tilting action for bevel cuts. Dynamically balanced cast-iron wheels, mounted on heavy-duty bearings. Cutting speed: 490 fpm. HP motor. UNIVERSAL BANDSAW RIP FENCE SYSTEM 21 fence. Fits on General International models: , 90-12, &

8 SANDERS 1-20 M1 $1,49. reg. $1, S M1 $1,0. reg. $1, X 89 OSCILLATING VERTICAL EDGE BELT SANDER Oscillating feature. Sanding belt operates at any angle from horizontal to vertical. Graphite covered steel platen for reduced friction and extended belt life. 1 ½ HP motor. 6 X 89 EDGE BELT SANDER Same features as model 1-00S M1 without oscillating feature M1 $979. reg. $1, DISC SANDER Powerful 2 HP motor with built-in mechanical brake automatically stops the disc in seconds upon shut-off. Rear wraparound and steel halfdisc front guards. 0 to 4 tilting cast-iron table. Magnetic 2-step safety switch to prevent unintentional start-up is equipped with an extra-large easy access stop panel and a lock-out key to prevent unauthorized use M1 $969. reg. $1, S M1 $2,29. reg. $2, X 108 OSCILLATING VERTICAL EDGE BELT SANDER Oscillating feature. Tables can be adjusted up or down for full belt use. Graphite backing reduces belt friction for longer belt life. Dynamically balanced 7 rubber drive roller and crowned 3 idler roller to ensure solid belt tracking. 2 HP motor. 6 X 108 EDGE BELT SANDER Same features as model 1-010S M1 without oscillating feature M1 $1,8. reg. $2, LOWER BELT GUARD 6 X 48 BELT & 12 DISC SANDER Sanding belt operates at any angle from horizontal to vertical. Steel half-disc front guard. Two large surface, cast-iron, tilting tables for unlimited sanding operations. Tilting cast-iron tables. Belt speed of 170 lin. fpm. Disc speed of 2000 rpm. 1 HP, 110/220 V motor.

9 1-1 M1 $1,329. reg. $1, DC M1 $1,429. reg. $1, HORIZONTAL SINGLE DRUM SANDER /2 HP 6 to 20 fpm variable feeding speed (conveyor belt). Heavy-duty open steel stand. Independent switches with removable safety key for both conveyor motor and main motor. 1 ½ HP motor M1 $2,389. reg. $2,0. 00 BUILT-IN DUST COLLECTOR 24 HORIZONTAL DOUBLE DRUM SANDER - 3 HP Two diameter aluminum drums. High quality conveyor belt for long service life. Magnetic safety switch. 3 to 20 fpm variable feeding speed (conveyor belt). 3 HP motor. 6 X 48 BELT & 12 DISC SANDER WITH BUILT-IN DUST COLLECTOR Sanding belt operates at any angle from horizontal to vertical with positive stops at 90 & 4. Steel half-disc front guard. Two large surface, cast-iron, tilting tables for unlimited sanding operations. Heavy-duty enclosed cabinet. 220 lin. fpm belt speed. 170 rpm disc speed. Heavy-duty model - 36 lbs. 1 ½ HP, 110/220 V motor M1 $329. reg. $3. 00 $489. reg. $8. 00 $1, M M1 reg. $1, ON-BOARD MITER GUIDE STORAGE BRACKET 1 & 2 X 42 BELT & 8 DISC SANDER 1 and grit sanding belts and grit sanding disc included. Two belt platens for use with either 1 or 2 x 42 sanding belts. Quickchange belt tension lever. Two built-in 1 ½ dust ports. Belt speed of 3100 lin. fpm. Disc speed of 340 rpm. ½ HP motor. TILTING TABLE OSCILLATING SPINDLE SANDER bench top model Precision ground cast-iron tilting table. 29 oscillations per minute. interchangeable spindles inclu-ding 1 / 4, 1 / 2, / 8, 1 1 / 2 & rpm spindle speed. ½ HP motor. TILTING TABLE OSCILLATING SPINDLE SANDER floor model Heavy-duty oil bath gearbox. 7 oscillations per minute. 10 interchangeable spindles including 1 / 4, 3 / 8, 1 / 2, / 8, 3 / 4, 1, 1 1 / 2, 2, 3 & rpm spindle speed. 1 HP motor. 9

10 10-600CI M1 $49. reg. $ C $1,249. reg. $1, SUPER TURBO AIR CLEANING SYSTEM Airflow Capacity of 700, 900, 120 cfm. Superior 2 stage filtration system includes a disposable, pleated outer filter and a 3 pocket inner filter. preprogrammed timer settings (2, 4, 6, 8 hours & continuous). Includes filter cleaning sensor with indicator light. ⅓ HP motor $9. reg. $ CYCLONIC TANK KIT DELUXE ROUTER TABLE KIT WITH CAST-IRON TABLE TOP KIT INCLUDES: 24 x 32 cast-iron table top (#40-07) Tubular steel stand (#40-08): Complete with built-in casters, on/off switch, and four adjustable leveling feet. Router lift (#40-12): Heavy-duty massive router lift with 9 ¼ x 11 ¾ aluminum top plate. Stable 4 post/lift screw design & chain drive lifting system controlling all 4 corners simultaneously. Deluxe router fence (#40-080): Fence has 2 ¼ dust collection outlet and adjustable scales. Dust collection kit (#40-130): Under table steel dust enclosure with access door, adjustable air vent, power cord grommet and 4 dust port with 2 ¼ branch inlet. Ideal for small shops: Can be used with any shop vacuum or small dust collector with 1 ½, 2 ½ or 4 inlets, to create a portable 2-stage dust collection system. Included accessories: (1) 6 gallon castermounted drum. (1) 2-stage cyclone/ separator lid. (2) Hoses with 3 x 2 ½ adapter fittings. (1) 2 ½ - 4 reducer fitting. (1) 1 ½ - 2 ½ reducer fitting. (1) 4 clamp. (1) 2 ½ clamp CF M1 $1,179. reg. $1, EK $4. reg. $ CAST-IRON ROUTER TABLE KIT FOR TABLE SAWS KIT INCLUDES:16 x 27 cast-iron table (40070), two adjustable-length steel support legs (40-068), deluxe 27 router fence (4006) and 9 ¼ x 11 ¾ Phenolic router plate (40-114). HEAVY-DUTY ROUTER LIFT WITH 9 1/4 X 11 3 /4 ALUMINUM TOP PLATE $379. reg. $ STOCK PUSHER $89. 1 ½ HP PORTABLE 2 STAGE DUST COLLECTOR reg. $ Airflow capacity 778 cfm*. Sound rating 84 db. Equipped with an ultra efficient 1 micron canister filter with total surface area of 40.3 square feet. 30 gallon chip collection drum included. * Cfm rating tested under resistance to simulate typical shop usage.

11 DUST COLLECTORS M CF M1 * All cfm ratings tested under resistance to simulate typical shop usage M1 $319. $3. $239. reg. $ reg. $7. 00 reg. $ /4 HP DUST COLLECTOR Airflow capacity 29 cfm*. Sound rating 90 db. Equipped with washable, extra-fine 2 micron filter bag. 1 HP DUST COLLECTOR Airflow capacity 647 cfm*. Sound rating 7 to 80 db. Equipped with washable, extrafine 2 micron filter bag. 1 HP DUST COLLECTOR WITH CANISTER FILTER Airflow capacity 06 cfm*. Sound rating 80 to 8 db. Equipped with high efficiency 1 micron canister filter ACF M1 $679. reg. $ /2 HP DUST COLLECTOR WITH CANISTER FILTER Airflow capacity 1100 cfm*. Sound rating 80 to 8 db. Equipped with 1 micron canister filter CF M1 $2,919. reg. $3, /2 HP DUST COLLECTOR Same features as 10-10ACF M1 with washable, extra fine 2 micron filter bag replacing canister filter A M1 $469. reg. $ ACF M1 $874. reg. $1, HP DUST COLLECTOR WITH CANISTER FILTER Airflow capacity 10 cfm*. Sound rating 80 to 90 db. Equipped with 1 micron canister filter. 3 HP 2 STAGE DUST COLLECTOR WITH CANISTER FILTER Airflow capacity 2800 cfm*. Sound rating 8 to 90 db. Equipped with 1 micron canister filter. Two piece caster mounted 0 gallon (60 U.S. gallon) drums sold separately (item #10-820). 2 HP DUST COLLECTOR Same features as ACF M1 with washable, extra fine 2 micron filter bag replacing canister filter. 3 HP 2 STAGE DUST COLLECTOR Same features as CF M1 with washable, extra fine micron filter bag replacing canister filter A M M1 $619. reg. $ $2,129. reg. $2,

12 30-11 M CE M M1 $1,89. reg. $2, $2,114. reg. $2, $3,319. reg. $4, SINGLE SURFACE PLANER 2 feed speeds: 16 & 20 fpm. Magnetic safety switch with extra-large stop panel and lockout key. Four-post design provides added stability. Built-in mobile base. 3 HP motor HC M1 4 rows, total 30-12HC M1 4 rows, total HC M1 $2,89. reg. $3, PLANER WITH MAGNUM HELICAL HEAD Same features as model M1 + Magnum helical head, #12H JOINTERS L M L M1 $8. reg. $1, of 42 insertss 1 SINGLE SURFACE PLANER 2 feed speeds: 16 & 20 fpm. Magnetic safety switch. Triple V-belt drive for greater power. Built-in mobile base. 3 HP motor mounted in cabinet for protection from dust. $3,1. reg. $4, PLANER WITH MAGNUM HELICAL HEAD Same features as model 30-12CE M1 + Magnum helical head, #12H of 42 insertss $2,0. reg. $2, SINGLE SURFACE PLANER 2 feed speeds: 16 & 20 fpm. Large cast-iron extension wings. Magnetic safety switch. Built-in mobile base with one-step lock-pedal. HP motor. $4,439. reg. $6, PLANER WITH MAGNUM HELICAL HEAD Same features as model M1 + Magnum helical head, #30300H 4 rows, total of 8 insertss 12 6 CLOSED BASE JOINTER ¼ long tables. Large surface, ground cast-iron tables. Cast-iron fence with 90 & 4 positive stops. Independent in-feed and out-feed table adjustment handwheels. 000 rpm cutter head speed. 1 HP motor LHC M1 6 CLOSED BASE JOINTER WITH MAGNUM HELICAL HEAD Same features as model L M1+ Magnum helical head, #100H (4 rows, total: 16 inserts). 8 JOINTER 74 7 / 8 long tables. Large surface, ground cast-iron tables. Independent in-feed and out-feed table adjustment handwheels. Magnetic switch for added safety. 00 rpm cutter head speed. 2 HP motor LHC M1 $1,3. $2,749. reg. $1, reg. $3, JOINTER WITH BYRD STYLE HELICAL HEAD Same features as model L M1+ Byrd helical head, #200HB (4 rows, total: 36 inserts).

13 M1, M2, M3 $,019. reg. $6, HC M1 $6. 00 reg. $ PLANER WITH HELICAL HEAD Helical cutter head with 26 reversible two-sided carbide inserts. Pre-set depth stop for repeat cuts at ⅛, ¼, ½ & ¾. Powerful 2 HP 1 A motor with thermal overload protection. 26 reversible two-sided carbide inserts M1 20 SINGLE SURFACE PLANER 2 feed speeds: 22 & 28 fpm. Anti-kickback fingers at the front of the in-feed roller to ensure maximum operator safety. Built-in table rollers reduce friction. Equipped with a sectioned in-feed roller and a rubber out-feed roller. 7 ½ HP motor HC M1, M2, M3 $6,2. 4 rows, total of 8 insertss reg. $8, PLANER WITH MAGNUM HELICAL HEAD $1,9. reg. $2, MOLDER Magnetic 2-step safety switch to prevent unwanted or unintentional start-up with an extra-large stop panel and lock-out key. Cast-iron table and head. Precision machined heavy-duty cast-iron dovetailed column. Independent, variable speed feed motor provides added control rpm cutter head speed. 2 HP motor. Same features as model M1, M2, M3 + Magnum helical head, #360H 80-07L M1 $769. reg. $ XHC M1 $3,7. reg. $, OPEN BASE JOINTER ¼ long tables. Large surface, ground cast-iron tables. Heavy-duty, three-knife cutter head. Jackscrew system for quick, easy knife adjustment. 000 rpm cutter head speed. 1 HP motor HC M1 $3,6. reg. $4, #20H #8032H Magnum helical head included 8 PARALLELOGRAM JOINTER Large surface 82 7/ 8 cast-iron tables. Heavy-duty center-mounted cast-iron fence with 4, 90 and 13 positive stops. Precision four point parallelogram table adjustment system. Magnetic safety switch mounted above the in-feed table for quick, easy access. 000 rpm cutter head speed. 3 HP motor. Magnum helical head included 10 JOINTER Large surface, precision ground 84 ¼ cast-iron tables with built-in rabbeting ledge. Handwheel adjustable in-feed and out-feed tables mounted on dovetailed ways. Accurate depth of cut scale in inches. Two way tilting fence with positive stops at 4 and rpm cutter head speed. 3 HP motor. 13

14 LATHES 2-60ABC M1 $2,2. reg. $2, TOOL REST & A 6 FACE PLATE INCLUDED MOVABLE EMERGENCY SWITCH 16 X 43 ELECTRONIC VARIABLE SPEED WOOD LATHE Specifically designed and built for professionals who want superior performance. Headstock swivels 360 with positive stops at 0, 4, 90, 13, 180 & 270 for outboard turning. Electronic inverter for variable speed adjustment between 4 & 370 rpm. Forward or reverse rotation. Low/high speed change lever for quick belt position changing. Quiet, highly efficient, low power consumption 2 HP motor. BONUS Pen turning mandrel set With the purchase of M1 only 2-00 FREE Pen turning starter kit 2-114QC M1 $64. reg. $ OPTIONAL 23 BED EXTENSION For maximum distance of 40 between centers. For 2-114QC M1 only With the purchase of M1 only 14 X 17 VARIABLE SPEED MAXI-LATHE VF Quick release belt tension lever for faster, easier speed changes. Forward or reverse spindle rotation selector switch. Digital spindle speed display. Maximum of 17 between centers. 3 variable speed ranges: 20 to 800, 0 to 1700 & 1200 to 3600 rpm. ¾ HP motor $210. reg. $ M1 $829. reg. $1, M1 $29. reg. $ PEN TURNING MINI-LATHE Designed and built specifically for turning pens and other smaller hobby type projects. Quick lock control levers easily position tool rest. Extruded aluminum frame, head and tailstock. Maximum distance of 12 between centers. 3 speeds: 130, 220 & 300 rpm. 1 HP motor. 12 X 17 VARIABLE SPEED MAXI-LATHE VS+ Headstock pivots 360 with 180 positive stop for outboard turning. Forward/reverse switch. Digital spindle speed display. Quick lock control levers easily position tool rest. Maximum distance of between centers. 3 variable speed ranges: 300 to 900, 600 to 1800 & 1200 to 3600 rpm. ¾ HP motor. OPTIONAL 32 BED EXTENSION For maximum distance of 49 between centers. For M1 only 2-20 $210. reg

15 PIECE WOOD TURNING MINI-CHISEL SET Includes: 1 / 8 gouge (#2-2) ¼ gouge (# / 32 parting tool (#2-26) ¼ round nose scraper (#2-270) ¼ skew chisel (#2-27) wooden case (#2-280) 2-20 $69. reg. $ Designed specially for smaller turning $49. reg. $ BONUS 1 wine stopper hardware kit 4 PIECE WOOD TURNING CHISEL SET Includes: ¾ diamond parting tool (#2-21) ½ round nose scraper (#2-220) 1 skew chisel (#2-22) ½ bowl gouge (#2-230) wooden case (#2-23) $1. reg. $ PEN TURNING STARTER KIT Starter kit includes: 1 pen turning hardware kit for each of the following pen styles, assorted wooden pen blanks & 1 bonus wine stopper hardware kit N $224. reg. $ Wood lathe not included $419. $194. $109. reg. $ reg. $ reg. $ TWOOD LATHE NOT INCLUDED 24 MINI-LATHE DUPLICATOR Fits most 6 to 14 swing bench top lathes with cast bedways. Extruded aluminum base and carriage. Smooth handwheel controlled chain drive system. 36 WOOD LATHE DUPLICATOR Fits most 12 to 22 floor model lathes with cast bedways. Extruded aluminum base and carriage. Smooth handwheel controlled rack & pinion system. High speed steel cutter. STEEL SUPPORT STAND FOR MAXI-LATHE (2-19N) & BED EXTENSION (2-196) Fits General International models: 2-100, 2-114, 2-114QC & M M1 $389. reg. $ $1,249. reg. $1, INCLUDED CONVENIENT TOOL HOLDER (tools not included) /8 HOLLOW CHISEL MORTISER ¼, / 16, 3 / 8 & ½ chisel & bit sets included. Includes sleeves for both / 8 and ¾ chisel shanks. Large table with telescopic extensions. Heavy-duty cast-iron construction. ½ HP TEFC motor. INCLUDED ADJUSTABLE SWIVEL FENCE 1 HOLLOW CHISEL MORTISER ¼, 3 / 8, ½ & 3 / 4 chisel & bit sets included. Heavyduty cast-iron construction. Lateral and longitudinal table movement. Tilting head and swivel fence. 1 HP motor $290. reg. $ OPTIONAL CLOSED STAND FOR MORTISER For 7-00T & 7-07 only 1

16 4-100 M1 $429. reg. $ S $189. reg. $ $329. reg. $ EDGE BANDER 26 ¾ x 7 ½ laminate covered table supports large workpieces. Electronically controlled heat element offers infinitely variable heat from 100 to 200 C. Built-in cut-off knife with palm-strike knob produces consistently accurate cuts. 2 (7. M) MEASURING TAPE M1-00 $6. reg. $10. 0 $1,649. reg. $2, MAXIMUM LOAD CAPACITY OF 200 LBS FLEXIBLE EXPANDABLE ROLLER STAND Adjustable height from 23 to nickelplated 1 ½ 13 ¾ rollers. 0 maximum expanded length. 14 ¾ compacted length. 4 wheels with locking foot levers MAXIMUM LOAD CAPACITY OF 400 LBS FLEXIBLE EXPANDABLE 2-WAY HEAVY-DUTY ROLLER STAND Adjustable height from 24 ¼ to nickel-plated 2 ¼ x 20 2-way rollers. 1 ½ maximum expanded length. $ reg. $0. 00 $1,2. reg. $1, /4 SPINDLE SHAPER ¼ & ½ router bit adapters included. 2 spindle speeds with reverse: 8000 & 10,000 rpm. Fence system / cutter head guard includes a cutter guard, spring hold-downs and a built-in 4 dust collection outlet. 3 HP motor M1 $3,29. reg. $4, pc plastic peg board shop organizer included (#9-082) (Tools & parts not included) with the purchase of only 60 X 30 OAK WORKBENCH WITH STEEL LEGS Solid 1 ½ thick table top with 2 apron for extra support around the edges. Includes both front and end vises with a double row of bench dog holes in the table for each vise. Large storage drawer on ball bearing slides. Sturdy adjustable height (33 to 39 ) steel legs. FOUR STATION 48 X 48 OAK WORKBENCH Solid 1 ½ thick laminated oak table. Includes four vises with a double row of bench dog holes for each vise. Sturdy cross brace reinforced hardwood support frame for maximum stability. Large inset table center for practical tool and parts storage. Includes ten bench dogs and four wooden stopper bars /4 PRODUCTION SHAPER 4 spindle speeds with reverse: 4000, 6000, 8000 & 10,000 rpm. Magnetic switch with thermal overload protection. Built-in retractable caster system provides mobility when needed. Large cutter guard with window, spring hold downs and built-in 4 dust outlet. HP motor $1,2. reg. $1, X 9 X 9 DUST COLLECTION FIRE PROTECTION CAGE All steel construction 100% non flammable. Open top for easy hose access. Self-standing design sets up on any flat sturdy surface and does not need to be permanently attached to walls or floor. Printed in Canada