Office of the Chairman IMC of Industrial Training Institute, Udhampur. RE-TENDER NOTICE.

Size: px

Start display at page:

Download "Office of the Chairman IMC of Industrial Training Institute, Udhampur. RE-TENDER NOTICE."

Kerry Adele Norris
5 years ago
Views:

1 Office of the Chairman IMC of Industrial Training Institute, Udhampur. RE-TENDER NOTICE. This Industrial Training Institute intends to purchase Tools, Machinery and Equipments for use in the trades fall under PPP mode for which tenders are invited. The manufactured/authorized Suppliers may obtain list of items with detailed specifications from the office of the undersigned on any working day after the publication of this notice in the News paper or can be download from Sealed tenders affixed with revenue stamps worth Rs (Rs. Five only) should reach to this office within 21 days by or before The Tender should be accompanied with the earnest money of Rs (Rs. Five thousand only) in the shape of CDR/FDR pledged to the undersigned of any scheduled bank which remain with Office till full supply is executed by the firm s per supply order. Terms and conditions. 1 The rates on tenders should be quoted neat and clean and without any cutting and over writing. 2 The rates quoted F.O.R. destination. 3 The specification and make should be mentioned clearly and separately on the quotations, otherwise the rates will not be treated as genuine. 4 The Institute reserves the right to accept or reject any quotation without assigning any reasons thereof. 5 In case the supplier fails to supply the ordered material in full, penalty of 2%of the total cost of the order will be imposed upon him. 6 The supplier has to deliver the goods in two weeks from the date of issue of supply order. / This can be altered depending upon the requirements of the Institution. 7 The rates should be strictly quoted exclusive of all taxes (VAT, Entry Tax if any other taxes etc. be quoted with each item). 8 The tender will be opened on by the IMC Institution purchase committee. The tenderness are advised to remain present at the tender opening time. Sd/- Member Secretary, IMC ITI Udhampur. No:- ITI/U/IMC/ Dated:- 23/6/2010 Copy to the:- 1. Chairman IMC C/O Everest House for information. 2. Director, Technical Education, J&K, Srinagar for information. 1

2 3. Deputy Director, Technical Education, Jammu for information. 4. Joint Director Information Department Jammu with the request to publish this notice in the Newspaper preferably Daily Excelsior and State Times. Annexure-A to Tender Notice No.ITI/U/IMC/ dated: 23/6/2010 S.No. Name of item with specification Rate 1. Surface plate 400x400mm 1 (Thick ISI ) 2. Scribing block universal 300mm - do- 3. Hand vice jaw 50 mm PYE 4. File flat smooth 200 mm Nelson 5. File half round rough 300 mm -do- 6. File square rough 250 mm -do- 7. File square smooth 200 mm -do- 8. File triangular rough 250 mm -do- 9. File flat rasp 250 mm -do- 10. File triangular smooth 200 mm -do- 11. Chisel cold flat 20 mmx300 mm -do- 12. Chisel cross cut 6x150mm IS 402 -do- 13. Chisel round nose 3x150xx IS:402 -do- 14. Chisel diamond point 6x150mm -do- 15. Tap and die set to cut BSP thread -do- 16. Punch letter set -do- 17. Punch number set -do- 2

3 18. Chase wedge 50mm -do- 19. Dresser lead 350x50mm -do- 20. Stick setting in 350x50mm ISI 21. Saw plumber 300mm ISI 22. Spanner monkry upto 50mm Taparia/PYE make 23. Cutter pipe wheel type 6mm to 25mm - do- 24. Pipe jointer, lead, universal - do- 25. Oil stone 150mmx50mmx25mm ISI 26. Soldering iron, opper fit, fire heated hatched straight 500 gms. ISI 27. Snip straight 250mm ISI 28. Try square 200mm PYE 29. Inside caliper 150mm -do- 30. Caliper outside 150mm -do 31. Odd leg caliper 200mm do- 32. Tenon saw Nelson 33. Handsaw -do- 34. Mortice chisel PYE 35. Firmer chisel -do- 36. Mallet medium IS: 2922 ISI 3

4 37. Jack plane PYE/Taparia 38. Pliers combination 200mm -do- 39. Blow lamp 500 millilitre ISI 40. Pipe opener PYE/ISI 41. Washer cutter Taparia/PYE 42. Pressing stock -do- 43. Mandrel Taparia/PYE 44. plumber kit containing tampin bent pin plumber hammers dressers, mallets, chase wedges, draw knife and step turner ISI 45. Long Nose Plier 150mm PYE/Taparia 46. Side cutter 150mm -do- 47. Screw Driver set -do- 48. Spanner Set -do- 49. Crimping tool (RJ45) -do- 50 Bench Vice 3 -do- 51. File 10 plare Nelson 52. Aluminum ladder folding 25 ISI 53. Aluminum ladder with tabletop 6 height ISI 54. Hammer ball pin 0.75 kg. Taparia 4

5 55. Chisel cold flat 19mm -do- 56. Center Punch 10mm Dia x 100mm do- 57. Steel Rule 15cm English and Metric Nelson 58 Screw Driver 30cmx9mm Blade Taparia 59. Spanner D.E set of 12 pieces (100mm- 32mm) PYE 60. Plier Combination 15cm Taparia 61. Hand file 20 cm second cut Nelson 62. Feeler gauge 20 blades (Metric) ISI 63. Ring Spanner set of 12 pieces (10mm- 32mm) Taparia 64. Steel tool box with lock and key (folding type) size 400x200x150mm ISI 65. Allen Key set of 12 pieces (10mm-32mm) Taparia 66. Circlip plier (Ext.& Inf) 150mm and 200 (two each) Taparia 67. Philips screw driver type set of 5 pieces (100mm-300mm) ISI 68. Rule steel 300mm ISI ss 69. Divider spring joint 150mm Taparia 70. Prick punch 15 mm -do- 71. Chisel cross cut 200mmx6mm do- 72. Hammer ball pin 0.5 kg. do- 5

6 73. Hammer copper 1 kg with handle do- 74. Engineering square 15cm blade -do- 75. Scriber 15 cm -do- 76. Scriber clock universal -do- 77. Hacksaw frame for 30 cm blade -do- 78. V block 75x38mm pair with clamps PYE 79. Punch Hollow 6,7,8,9,10 5and 12mm set ISI 80. Punch figure set 3mm ISI 81. Punch letter set 3mm ISI 82. Hand vice 37mm Taparia 83. File flat 35cm bastard Nelson 84. Screw Driver electrician type 15cm size PYE 85. File flat 25cm second cut Nelson 86. File flat 20cm smooth -do- 87. File flat sate edge 25cm smooth -do- 88. File triangular 15 cm second cut -do- 89. File half round 20cm second cut -do- 90. File square 300cm rough -do- 91. File square 20cm second cut -do- 92 Twist drill metric 3mm to 12mm (1mm step) Nelson make 6

7 93. Taps and dies complete set ion box B.A BSW, BSF, American and metric with handles PYE make 94. Hand reamer, adjustable 10.5mm to 11.25mm, 11.25mm to 12.75mm, 12.75mm to 14.25mm & 14.25mm to mm PYe make 95. Scraper flat 25mm Nelson make 96. Scraper triangular 25mm -do- 97. Scraper half round 25mm -do- 98. Sets of Morse socket MT 0-1, 1-2 and 2-3 Nelson 99. Micrometer outside 25-50mm Nelson make 100. Micrometer outside0-25mm -do Micrometer outside 50-75mm -do Micrometer outside do Micrometer inside 50 to 75mm and 150mm and 25mm-50mm Nelson 104. Vernier caliper set 250 or 200 mm inside,outside and depth safety goggle Nelson 105. Hammer, Planishing -do Setting Hammer PYE make 107. Mallet(Wooden) ISI 108. Trammel 30 cm -do Blow Lamp 0.5ltr -do- 7

8 110. Plier Nose(round and Straight)150mm and 200mm Taparia make 111. Snip Straight 250mm Taparia make 112. Spanner double ended set of 12 metric size 6-32 mm Taparia make 113. Spanner off set double ended set of 7 PCs(6mm-17mm) Taparia make 114. Double open ended ignition spanner set of 5(0 to 9 mm) Taparia make 115. Spanner adjustable 20 cm Taparia make 116. Spanner ring off set of 6(SAE) -do Spanner for sparking plug 14mm -do Magneto Spanner set of 8 spanners -do Spanner socket set 6-32 mm socket complete set Taparia make 120. Spanner T flex for screwing up and unscrewing in in accessible position Taparia make 121. Double open ended tappet spanner Taparia make 122. Drift copper 10 mm diax150mm Nelson make 123. Spray gun- Kerosene ISI 124. Pressure Grease gun ISI 125. Chain Pully block 3 ton capacity Nelson 8

9 126. Tray Cleaning 45x30 cm ISI 127. Oil can 0.5 ltr. do Lifter, valve spring -do Tools, valve grinding suction type (consumable tool) ISI 130. Vacumm gauge 0.75cm ISI 131. Stone, carborandum 15x53.75cm rough and smoothe4 ISI 132. Cylinder dial guage ISI 133. Jack, Hydraulic Hi-lift type (Trolly type) ISI 134. Wheel Alignment gauge-magnetic type with turn tables ISI 135. Puller set steering wheel universal ISI 136. Puller set universal bearing and bushes - do Lifting jack, screw type -do Hot patch clamp -do Spring plier 150,200mm - do Tyre changer -do- Sd/- Member Secretary, IMC ITI Udhampur. 9

10 Annexure-B to tender Notice No.ITI/U/IMC/ dated 23/6/2010 S.No. Name of item with specification Rate 1 Digital DC power supply 0-30 volt, 5Amp BOSCH 2 L.C.R. Digital Meter BOSCH 3 Fan Winding Machine ISI 4 AC drive 3HP 3 Phase -do- 5 Contactor 32 Amp L&T make 6 Over load relay 32 Amp L&T 7 Push Button with box ISI 8 Microwave oven LG 9 Portable drill machine 12 mm and 6mm each Wolf make AH 12 Volt Battery Exide make 11 Techo meter Mars make 12 Earth resistance tester Mars make 13 Oil testing kit ISI 14 Soldering Iron 25 Watt. ISI 15 De soldering pump -do- 16 Neon tester PYE make 17 Digital DC Power supply 0-30V 2 Amp BOSCH make 10

11 18 Frequency Meter Digital ISI 19 Volt Meter Digital -do- 20 Multi meter Analog Sanwa make 21 Multi meter digital -do- 22 Lead Acid battery 12V 60 Ah Excide make 23 Capacitance meter digital BOSCH makes 24 DC servo motor ISI 25 Techo Generator -do- 26 Invertor 1000 Watt Luminous pure Sine Wave 27 Inverter 500 Watt -do- 28 Function generator ISI 29 AM/FM signal generator ISI 30 RF Signal generator -do- 31 TVRO terminal with LNB and Receiver LG 32 Cable TV Line Amplifier LG 33 Digital IC Trainer Kit Bosch make 34 Microprocessor Trainer Kit 8085 Bosch make 35 Terminal Adopter ISI 36 Cable MODEM -do- 37 Different Extension cards ISI 11

12 38 Soldering iron 120 watts -do- 39 Soldering iron copper 225 gms(fire heated) 150mm and 200mm ISI 40 Drilling machine (bench) 12mm dia Wolf make 41 Testing sparking plug NEON type ISI 42 Compressor air piston type (Vehicular ) ISI 43 High rate discharge tester ISI 44 AVO meter Sanwa make 45 Growler Internal And External Each ISI 46 Battery charger Mico make 47 Timing light ISI 48 Hydrometer -do- 49 Continuity meter ISI 50 Washing Machine (Semi-automatic 6.5 Kg) LG Sd/- Member Secretary IMC,ITI Udhampur 12

A Page No. 1. Electrode Drying oven thermostatically controlled temperature C

A Page No. 1. Electrode Drying oven thermostatically controlled temperature C A Page No. 1 Package No 1. : Machinery of Welding, Sr. Name of Item Rate to be quoted by tenderer (in rupees) along with specification and make Electrode Drying oven thermostatically controlled temperature