Series HIGH PERFORMANCE GEO TURNING CENTER

Size: px

Start display at page:

Download "Series HIGH PERFORMANCE GEO TURNING CENTER"

Howard Gardner
5 years ago
Views:

1 Series HIGH PERFORMANCE GEO TURNING CENTER

2 Series es New Concept Revolutionary Structural Design GT-200A/B/MA A GT-0A/B/MA/MB GT-300A/B/LA/LB/MA/MB/LMA/LMB GT-380A/B/LA/LB The GT Series High Performance Turning Center Adopts Revolutionary Design Concepts in Rigidity, Accuracy and Performance. New box type base structure provides unprecedented rigidity during heavy turning and superb dampening capacity which achieves flawless accuracy and stability. The oversize spindle is equipped with a high torque motor for exceptional turning and milling results. A complete thermal control system is implemented to minimize structural deformation and provide the best machining accuracy. Additionally, a 12-station servo driven VDI turret, designed and manufactured by YCM, can be offered as an optioin for live tooling function realizing various complex machining. 1

3 2

Series Ideal Structural Rigidity and Design Ultra-stable

design offers a ultra-wide base structure, high quality

to ensure the best machining performance by eliminating

proven through a strict FEM analysis to ensure the highest

The revolutionary base design separates chip and coolant

Thus, it minimizes thermal distortion of machine base

The GT series also includes standardd chip conveyor that

machine depending on your factory layout.

4 Series Ideal Structural Rigidity and Design Ultra-stable and Highly Rigid Box-type Base Structure The box-type design offers a ultra-wide base structure, high quality MEEHANITE castings, oversize hardened & ground boxed ways to ensure the best machining performance by eliminating structural distortion and deformation under heavy machining conditions. The inner walls are strengthened with the rib design proven through a strict FEM analysis to ensure the highest rigidity and damping capacity. The revolutionary base design separates chip and coolant from the base structure. Thus, it minimizes thermal distortion of machine base caused by high temperature of chips and coolant. The GT series also includes standardd chip conveyor that can be installed either from the rear or side of the machine depending on your factory layout. Base Comparison: The GT Series vs. Slanted Bed Lathes Model Shape Structure Box Ways GT Series Boxed Strengthened Oversize Other Lathes Rectangle Normal Normal Antidistortion Enhanced Normal Dampening Capacity Enhanced Normal 3

5 Versatile Tailstock Design The tailstock is supported by hardened and ground boxed ways that is structurally one-piece with the machine base, which ensures the best structural rigidity. The oversize quill supports heavy workpieces while maintaining machining accuracy. Optional live quill is ideal for high-speed, highh production environment. Tailstock Specifications Model Stationary Center Live Center (opt.) Quill Diameter Max. Pressure Max. Thrust Force GT-200 MT-4 ø75 mm ø2.95" 10 kg/cm 2 142psi 360 kgf 794 Ib GT-0/300/380 MT-5 MT-4 ø100 mm ø3.94" 10 kg/cm 2 142psi 590 kgf 1,300 Ib The GT Series Base Data GT-200A/B/MA GT-0A/B GT-0MA/MB GT-300A/B/MA/MB GT-380A/B GT-300LA /LB /LMA /LMB GT-380LA/LB Length 1,740 mm 68" 1,860 mm 73" 2,585 mm 102" 2,950 mm 116" Width 1,020 mm 40" 1,175 mm 46" 1,195 mm 47" 1,195 mm 47" Weight 1,880 kg 4,145 lb 2,520 kg 5,556 lb 3,020 kg 6,658 lb 3,590 kg 7,915 lb High Productivity Enhancements Automatic Tool Length Measurement (opt.) Automatic Bar-feeder System (opt.) Automatic Parts Catcher (opt.) and Transfer System (opt.) 4

6 Series High Performance The GT series is ideal for high productivity turning and milling with exceptional speed, power, and capacity. Oversize hardened and ground box ways, ballscrew and bearings a re essential requirements for enhancing the axial and radial cutting rigidity. High torque spindle motor provides the necessary power for roughing operation on tough material at low spindle speed. Stable & Reliable Cutting Performance Width of Groove 8mm Powerful Cutting Performance F=0.mm 10mm Cutting Depth Model Material (JIS) Diameter Cutting Velocity Cutting Feed Cutting Depth GT-0 series S45C ø89 mm 150 m/min. 0.3 mm/rev. 10 mm Max. Drilling Capacity: ø59mm Model Drill Diameter Material (JIS) Spindle Speed Cutting Feed Cutting Velocity ø59 mm S45C 650 rpm 0.15 mm/rev. 120 m/min. GT-0 series 5

GT-0B/MB Model GT-200A/MA GT-200B GT-0A/MA GT-300A/LA GT-300MA/LMA GT-300B/LB GT-300MB/LMB GT-380A/LA GT-380B/LB Chuck Size 6" 8" 8" 10"

13" Bearings Bar Capacity ø45 mm 1.77" ø52 mm 2.05" ø52 mm 2.05" ø75 mm 2.95" ø91 mm 3.58" ø91 mm 3.

powerful hydraulic system ensures machining rigidity and accuraacy.

Unit: mm inch ø90 mm 3.54" ø100 mm 3.94" ø110 mm 4.33" ø130 mm 5.12" ø160 mm 6.30" ø160 mm 6.30" ø80 mm 3.15" ø90 mm 3.54" ø100 mm 3.94" ø120 mm 4.

proven through rigorous run-in test to assure the highest quality and reliability.

High Precision Bearings Oversize dual roller spindle bearings are used in both front and rear of the spindle to provide optimal spindle

Comprehensive Thermal Control System The spindle headstock is symmetrically designed with radial configuration for the best heat

Effective exhaust fans are installed on the spindle headstock to remove the heat generated from long running hours.

7 GT-0B/MB Model GT-200A/MA GT-200B GT-0A/MA GT-300A/LA GT-300MA/LMA GT-300B/LB GT-300MB/LMB GT-380A/LA GT-380B/LB Chuck Size 6" 8" 8" 10" 12" 15" Spindle Through Hole ø56 mm 2.20" ø62 mm 2.44" ø62 mm 2.44" ø88 mm 3.46" ø105 mm 4.13" ø105 mm 4.13" Bearings Bar Capacity ø45 mm 1.77" ø52 mm 2.05" ø52 mm 2.05" ø75 mm 2.95" ø91 mm 3.58" ø91 mm 3.58" Front Dual Roller + Angular Contact Rear Dual Roller Heavy-duty Spindle Design and Durable Hydraulic Chuck High quality chuck with powerful hydraulic system ensures machining rigidity and accuraacy. Pressure sensors are added to hydraulic system for monitoring clamping force of chuck, assuring the proper clamping of heavy parts. Unit: mm inch ø90 mm 3.54" ø100 mm 3.94" ø110 mm 4.33" ø130 mm 5.12" ø160 mm 6.30" ø160 mm 6.30" ø80 mm 3.15" ø90 mm 3.54" ø100 mm 3.94" ø120 mm 4.72" ø150 mm " ø150 mm " Unique Quill-type Spindle Cartridge All spindles are strictly assembled in temperature controlled room, and proven through rigorous run-in test to assure the highest quality and reliability. The unique quill-type spindle cartridge designed for easy maintenance and repair if necessary. High Precision Bearings Oversize dual roller spindle bearings are used in both front and rear of the spindle to provide optimal spindle rigidity that is capable of handling 10mm cutting depth on hard material. Comprehensive Thermal Control System The spindle headstock is symmetrically designed with radial configuration for the best heat reduction. (GT-0/300/380 series) Reinforced ventilation is located throughout the spindle head to minimize thermal growth. Effective exhaust fans are installed on the spindle headstock to remove the heat generated from long running hours. High performance piston pump and radiation system are added to control the temperature of hydraulic oil, which minimize the thermal impact of hydraulic system. Isolated coolant tanks eliminate the effect of high coolant temperature after long running hours, which reduces structural deformation. The spindle motor sits outside of the machine base to isolate the heat generated from spindle motor after long operations. Low heat generated work lamp is installed to minimize temperature impact. 6

8 Series Powerful Milling Capability Installed with YCM in-house servo-driven VDI turret with live tooling and full C-axis contour control. The rigidity of the GT series is demonstrated through a wide range of complex milling functions enhancing the productivity and versatility of the GT series. The ultra high-speed servo-driven turret with all stations live enables the GT series to undertake complex machining requirements. 7

The turret is designed with optimal tool arrangement to minimize the interference and maximize machine utilization for effective production capacity.

9 Powerful VDI Turret with Milling Functions Extra large turret 3-piece coupling are installed to assure the best milling performance. VDI turret is servo-driven for quick and reliable tool indexing; the adjacent tool index time is only 0.6 second that reduces non-machining time and improves productivity. The turret is designed with optimal tool arrangement to minimize the interference and maximize machine utilization for effective production capacity. VDI Turret Machining Capacity Turning Tool Post Milling Tool Post Collet Type Max. Milling Tool Shaft Max. Drilling Tool Shaft Max. Tapping Tool Shaft End Milling Capacity Rigid Tapping Capacity GT-200MA VDI 30 DIN VDI 30 DIN DIN 1809 ER ø16 mm ø0.63" ø14 mm ø0.55" M12 x 1.75P ø16 x 6 mm ø0.63 x 0.24" M6 x 1P GT-0MA/MB GT-300MA/MB GT-300LMA/LMB VDI 40 DIN VDI 40 DIN DIN 1809 ER32 ø20 mm ø0.79" ø20 mm ø0.79" M16 x 2P ø20 x 10 mm ø0.79 x 0.39" M6 x 1P VDI Live Tool Motor Torque Chart 4,500rpm 3,000rpm kgf-m lb-ft kw HP kgf-m lb-ft kw HP MA MA -300MA ,000 1,500 2,000 3,000 4,500 rpm 0 1,500 3,000rpm SPINDLE SPEED (rpm) SPINDLE SPEED (rpm) 8

Tooling Chart : Standard : Optional Unit: mm inch GT-200A GT-200B GT-0A GT-0B

Boring Bar Sleeve Boring Bar Holder Boring Tool MT1-1 PC MT2-1 PC MT3-1 PC MT4

ø1" - 2 PC ø20 ø3/4" - 1 PC ø16 ø5/8" - 1 PC ø12 ø1/2" - 1 PC ø10 ø3/8" - 1 PC ø8

ø1&1/4" - 2 PC ø ø5/16" - 1 PC ø6 ø1/4" - 1 PC ø40 ø1&1/2" - 5 SET ø40 ø1&1/2"

Sleeve <ø40 <ø1&1/2" Oil-feel Drill ø32 ø1&1/4" - 1 PC ø ø1" - 1 PC ø20 ø3/4" ø16

ø20 ø3/4" ø16 ø5/8" Drill Holder ø40 ø1&1/2" - 1 SET ø40 ø1&1/2" - 1SET ø40

and Face Tooling 12T - 2 PC 10T - 2 PC Gib 12T- 20 3/4" - 2 SET 10T- 1" - 2 SET 1"

10 Tooling Chart : Standard : Optional Unit: mm inch GT-200A GT-200B GT-0A GT-0B Drill Drill Socket Drill Drill Socket Boring Tool MT1-1 PC MT2-1 PC MT3-1 PC MT4 Boring Bar Sleeve Boring Bar Holder Boring Tool MT1-1 PC MT2-1 PC MT3-1 PC MT4 Boring Bar Sleeve Boring Bar Holder <ø40 <ø1&1/2" Boring Tool ø32 ø1&1/4" - 2 PC ø ø1" - 2 PC ø20 ø3/4" - 1 PC ø16 ø5/8" - 1 PC ø12 ø1/2" - 1 PC ø10 ø3/8" - 1 PC ø8 ø5/16" - 1 PC ø6 ø1/4" - 1 PC ø40 ø1&1/2" - 5 SET <ø40 <ø1&1/2" Boring Tool ø32 ø1&1/4" - 2 PC ø ø1" - 2 PC ø20 ø3/4" - 1 PC ø16 ø5/8" - 1 PC ø12 ø1/2" - 1 PC ø10 ø3/8" - 1 PC ø8 ø5/16" - 1 PC ø6 ø1/4" - 1 PC ø40 ø1&1/2" - 5 SET ø40 ø1&1/2" ø40 ø1&1/2" Oil-feel Drill Oil-feel Tool Sleeve Oil-feed Drill Oil-feed Tool Sleeve <ø40 <ø1&1/2" Oil-feel Drill ø32 ø1&1/4" - 1 PC ø ø1" - 1 PC ø20 ø3/4" ø16 ø5/8" Drill Holder <ø40 <ø1&1/2" Oil-feed Drill ø32 ø1&1/4" - 1 PC ø ø1" - 1 PC ø20 ø3/4" ø16 ø5/8" Drill Holder ø40 ø1&1/2" - 1 SET ø40 ø1&1/2" - 1SET ø40 ø1&1/2" Square Tool Holder ø40 ø1&1/2" I.D. and Face Tooling Tool Clamping Pad I.D. and Face Tooling Gib Square Tool Holder 12T- 20 3/4" 10T- 1" O.D. and Face Tooling 12T - 2 PC 10T - 2 PC Gib 12T- 20 3/4" - 2 SET 10T- 1" - 2 SET 1" O.D. and Face Tooling 1" - 2 SET Gib 1" - 2 SET 12T- 20 3/4" 10T- 1" 12T- 20 3/4" - 12 SET 10T- 1" - 10 SET 1" 1" - 12 SET 9

內孔刀刀套圓型刀架 Tooling Chart 內孔刀 : Standard : Optional 油路鑽頭刀套 Unit: mm inch 鑽孔刀架 GT-300A/B GT-300LA / LB GT-380A/B GT-380LA / LB

Sleeve Boring Bar Holder Boring Tool Boring Bar Sleeve Boring Bar Holder <ø50 <ø2" Boring Tool ø40 ø1&1/2" - 2 PC ø32 ø1&1/4" - 2

Tool ø40 ø1&1/2" - 2 PC ø32 ø1&1/4" - 2 PC ø ø1" - 1 PC ø20 ø3/4" - 1 PC ø16 ø5/8" - 1 PC ø12 ø1/2" - 1 PC ø10 ø3/8" - 1 PC ø8

Oil-feed Drill ø40 ø1&1/2" - 1 PC ø32 ø1&1/4" - 1 PC ø ø1" - 1 PC ø20 ø3/4" ø16 ø5/8" Drill Holder ø50 ø2" - 1 SET <ø50 <ø2"

Tool Holder ø50 ø2" Square Tool Holder I.D.

and Face Tooling Gib 10T- 1" 8T- 32 1&1/4" 10T -2 SET 8T -2 SET 10T- 1" - 2 SET 8T- 32 1&1/4" - 2 SET 32mm 1&1/4" 32mm 1&1/4"-

11 內孔刀刀套圓型刀架 Tooling Chart 內孔刀 : Standard : Optional 油路鑽頭刀套 Unit: mm inch 鑽孔刀架 GT-300A/B GT-300LA / LB GT-380A/B GT-380LA / LB 油路鑽頭 Drill Drill Socket Drill Drill Socket 方型刀架固定楔內徑刀與面車刀 MT2 MT3-1 PC MT4-1 PC MT2 MT3-1 PC MT4-1 PC Boring Tool Boring Bar Sleeve Boring Bar Holder Boring Tool Boring Bar Sleeve Boring Bar Holder <ø50 <ø2" Boring Tool ø40 ø1&1/2" - 2 PC ø32 ø1&1/4" - 2 PC ø ø1" - 1 PC ø20 ø3/4" - 1 PC ø16 ø5/8" - 1 PC ø12 ø1/2" - 1 PC ø10 ø3/8" - 1 PC ø8 ø5/16" ø50 ø2" - 5 SET <ø50 <ø2" Boring Tool ø40 ø1&1/2" - 2 PC ø32 ø1&1/4" - 2 PC ø ø1" - 1 PC ø20 ø3/4" - 1 PC ø16 ø5/8" - 1 PC ø12 ø1/2" - 1 PC ø10 ø3/8" - 1 PC ø8 ø5/16" ø50 ø2" -5 SET ø50 ø2" Oil-feed Drill 外徑刀與面車刀固定楔 Boring Bar Sleeve ø50 ø2" Oil-feed Drill Boring Bar Sleeve <ø50 <ø2" Oil-feed Drill ø40 ø1&1/2" - 1 PC ø32 ø1&1/4" - 1 PC ø ø1" - 1 PC ø20 ø3/4" ø16 ø5/8" Drill Holder ø50 ø2" - 1 SET <ø50 <ø2" Oil-feed Drill ø40 ø1&1/2" - 1 PC ø32 ø1&1/4" - 1 PC ø ø1" - 1 PC ø20 ø3/4" ø16 ø5/8" Drill Holder ø50 ø2" -1SET ø50 ø2" Square Tool Holder ø50 ø2" Square Tool Holder I.D. and Face Tooling Gib I.D. and Face Tooling Gib 10T- 1" 8T- 32 1&1/4" 10T -2 SET 8T -2 SET 10T- 1" - 2 SET 8T- 32 1&1/4" - 2 SET 32mm 1&1/4" 32mm 1&1/4"- 2SET 32mm 1&1/4" - 2SET Cutting/Grooving Tool Cutting/Grooving Tool Holder Cutting/Grooving Tool Cutting/Grooving Tool Holder 10T- 1" 8T- 32 1&1/4" O.D. and Face Tooling Gib 10T- 1" - 1 SET 8T- 32 1&1/4" - 1 SET 32mm 1&1/4" O.D. and Face Tooling Gib 32mm 1&1/4" - 1SET 10T- 1" 8T- 32 1&1/4" 10T -10 SET 8T -8 SET 32mm 1&1/4" 32mm 1&1/4" -10SET 10

Tooling Chart : Standard : Optional Unit: mm inch GT-200MA GT-200 Plug-12 PC GT-0 GT-0MA/MB GT-300MA/MB GT-300 GT-300LMA/LMB GT-300 Plug-12 PC Gib-12 SET ø30mm or

1/2" E2 40x16 5/8" E2 40x20 3/4" E2 40x 1" E2 40x32 1&1/4" ø40mm or Less boring bar E2 40x40 1&1/2" Boring Holder Drill Holder Drill F30-MT1 F30-MT2 F30-MT3 Drill

ET1-ER(M8) ET1-ER(M10) ET1-ER(M12) Tapping Sleeve Axis Milling Tool Holder Collet Axis Milling Tool Holder Collet O.D. Tool Holder B3-40x 1" B3-30x20 3/4" Drill O.

34409(9-8mm) 34410(10-9mm) 34411(11-10mm) 34412(12-11mm) 34413(13-12mm) 34414(14-13mm) 34415(15-14mm) 34416(16-15mm) F40-MT1 F40-MT2 F40-MT3 F40-MT4 Boring Holder

12 Tooling Chart : Standard : Optional Unit: mm inch GT-200MA GT-200 Plug-12 PC GT-0 GT-0MA/MB GT-300MA/MB GT-300 GT-300LMA/LMB GT-300 Plug-12 PC Gib-12 SET ø30mm or Less boring bar E2 30x 8 5/16" E2 30x10 3/8" E2 30x12 1/2" E2 30x16 5/8" E2 30x20 3/4" E2 30x 1" E2 30x32 1&1/4" Gib-12 SET E2 40x 8 5/16" E2 40x10 3/8" E2 40x12 1/2" E2 40x16 5/8" E2 40x20 3/4" E2 40x 1" E2 40x32 1&1/4" ø40mm or Less boring bar E2 40x40 1&1/2" Boring Holder Drill Holder Drill F30-MT1 F30-MT2 F30-MT3 Drill 20mm 3/4" O.D. & End Tool Holder mm 1" 20mm3/4" O.D. Tool Holder mm 1" Collet DA Collet Radial Milling Tool Holder End milling BR ET1-ER(M1) ET1-ER(M2) ET1-ER(M3) ET1-ER(M4) ET1-ER(M5) ET1-ER(M6) ET1-ER(M8) ET1-ER(M10) ET1-ER(M12) Tapping Sleeve Axis Milling Tool Holder Collet Axis Milling Tool Holder Collet O.D. Tool Holder B3-40x 1" B3-30x20 3/4" Drill O.D. & End Tool Holder CB3-40x 1" CB3-30x20 3/4" 11 Drill Holder mm 1" 20mm 3/4" 34403(3-2mm) 34404(4-3mm) 34405(5-4mm) 34406(6-5mm) 34407(7-6mm) 34408(8-7mm) 34409(9-8mm) 34410(10-9mm) 34411(11-10mm) 34412(12-11mm) 34413(13-12mm) 34414(14-13mm) 34415(15-14mm) 34416(16-15mm) F40-MT1 F40-MT2 F40-MT3 F40-MT4 Boring Holder Drill 34503(3-2mm) 34504(4-3mm) 34505(5-4mm) 34506(6-5mm) 34507(7-6mm) 34508(8-7mm) 34509(9-8mm) 34510(10-9mm) 34511(11-10mm) 34512(12-11mm) 34513(13-12mm) 34514(14-13mm) 34515(15-14mm) 34516(16-15mm) 34517(17-16mm) 34518(18-17mm) 34519(19-18mm) 34520(20-19mm) DA Collet Radial Milling Tool Holder Collet End milling DBRR ET1-ER32(M4) ET1-ER32(M5) ET1-ER32(M6) ET1-ER32(M8) ET1-ER32(M10) ET1-ER32(M12) ET1-ER32(M16) Tapping Sleeve

13 Tool Interference & Working Capacity Unit: mm inch : Spindle Center GT-200A 6"Chuck/12T Stroke Interference of facing and boring tool ø188 ø Stroke ø46 ø1.81 ø40 ø Z-axis stroke Max. tool length ø490 ø19.29 Max. turning dia. ø260 ø10.24 ø169 ø6.65 (6"Chuck) Interference of O.D. and boring tool ø184 ø Interference of O.D. and boring bar sleeve ø176 ø Tail stock quill stroke Tail stock base stroke GT-200B 8"Chuck/10T ø490 ø Stroke Interference of facing and boring tool ø233 ø Stroke ø40 ø1.57 ø46 ø Max. turning dia. ø260 ø10.24 ø210 ø8.27 (8"Chuck) Interference of O.D. and boring tool ø2 ø8.86 Interference of O.D. and boring bar sleeve ø219 ø Max. tool length Z-axis stroke Tail stock Tail stock quill stroke base stroke GT-0A 8"Chuck/12T ø585 ø Stroke Interference of facing and boring tool ø231 ø Stroke 0.98 ø210 ø8.27 (8"Chuck) Max. turning dia. ø350 ø13.78 Interference of O.D. and boring tool ø221 ø8.7 Interference of O.D. and boring bar sleeve ø215 ø Max. tool length Z-axis stroke Tail stock quill stroke Tail stock base stroke

14 Tool Interference & Working Capacity GT-0B 10"Chuck/10T Unit: mm inch : Spindle Center ø585 ø Stroke Interference of facing and boring tool ø283 ø11.14 Interference of O.D. and boring tool ø262 ø Stroke Interference of O.D. and boring bar sleeve ø268 ø Max. turning dia. ø350 ø13.78 ø4 ø10 (10" Chuck) Max. tool length Tail stock 7 quill stroke Z-axis stroke Tail stock base stroke GT-300A/LA 10"Chuck/10T Interference of cut off tool holder and boring bar sleeve ø298 ø11.73 ø58 ø2.28 ø50 ø Stroke 1 ø620 ø Interference of facing and boring tool ø298 ø Stroke ø50 ø1.97 ø60 ø Interference of O.D. and boring tool ø277 ø10.91 Interference of O.D. and boring bar sleeve ø267 ø Max. tool length Z-axis stroke GT-300A: GT-300LA: 1, Max. turning dia. ø440 ø17.32 ø4 ø10(10" Chuck) Tail stock quill stroke Tail stock base stroke GT-300A: GT-300LA: 1, GT-300A: GT-300LA: 1, GT-300B/LB 12"Chuck/8T Interference of cut off tool holder and boring bar sleeve ø375 ø Stroke Interference of facing and boring tool ø373 ø Stroke ø60 ø2.36 ø50 ø1.97 Interference of O.D. and boring tool ø351 ø13.82 Interference of O.D. and boring bar sleeve ø341 ø13.43 Z-axis stroke GT-300B : GT-300LB : 1, Max. tool length ø610 ø Max. turning dia. ø440 ø17.32 ø305 ø12 (12" Chuck) Tail stock 13 quill stroke Tail stock base stroke GT-300B : GT-300LB :1, GT-300B : GT-300LB :1,

15 Tool Interference & Working Capacity GT-380A/LA 12"Chuck/10T Unit: mm inch : Spindle Center Cutoff tool holder interference with sleeve ø348 ø Stroke Facing tool interference with boring tool ø339 ø Stroke ø60 ø2.36 ø50ø O.D. tool interference with boring tool ø320 ø12.6 O.D. tool interference with sleeve ø310 ø Max. tool length Z-axis stroke GT-380A : GT-380LA :1, ø686 ø Stroke ø305 ø12 (12"Chuck) ø381 ø15 (15"Chuck) Max. turning dia. ø560 ø Tail stock quill stroke GT-380A : GT-380LA :1, Tail stock base stroke GT-380A : GT-380LA :1, GT-380B/LB 15"Chuck/10T Cutoff tool holder interference with sleeve ø348 ø Stroke Facing tool interference with boring tool ø339 ø Stroke ø60 ø2.36 ø50ø O.D. tool interference with boring tool ø320 ø12.6 O.D. tool interference with sleeve ø310 ø Max. tool length Z-axis stroke GT-380B : GT-380LB :1, ø686 ø Stroke ø305 ø12 (12"Chuck) ø381 ø15 (15"Chuck) Max. turning dia. ø560 ø Tail stock Tail stock base stroke quill stroke GT-380B : GT-380LB :1, GT-380B : GT-380LB :1,

16 Tool Interference & Working Capacity GT-200MA 6"Chuck/12T Unit: mm inch : Spindle Center O.D. Tool Holder X-Axis Stroke ø176 ø ø212 ø8.35 ø182 ø ø6.61 ø168 X-Axis Stroke ø ø X-Axis Stroke ø0 ø9.84 ø42 ø1.65 ø220 ø8.66 ø206 ø X-Axis Stroke ø16 ø ø X-Axis Stroke ø ø6.3 ø160 ø230 ø9.06 Max. turing dia. ø210 ø8 (8 chuck dia.) ø199 ø7.83 ø32 ø1.26 ø560 ø ø171 ø ø169 ø6 (6 chuck dia.) 60 ø222 ø8.74 ø202 ø ø212 ø8.35 ø230 ø X-Axis Stroke I.D. Tool Holder ø560 ø ø180 ø7.09 ø208 ø8.19 ø32 ø1.26 ø152 ø5.98 ø160 ø ø210 ø8 (8" chuck dia.) ø190 ø7.48 ø154 ø6.06 ø165 ø ø42 ø1.65 ø16 ø Max ø160 ø ø32 ø1.26 ø108 ø4. ø152 ø ø16 ø0.63 ø170 ø6.70 ø145ø5.71 ø169 ø6 (6" chuck dia.) ø16 ø0.63 ø108 ø ø42 ø Z-axis cover Max

17 Tool Interference & Working Capacity Unit: mm inch O.D. Turning Tool Z-axis stroke Tail stock Tail stock quill stroke base stroke Boring Tool Z-axis stroke Face Tool X-axis stroke Z-axis stroke X-axis stroke Radial Drive Tool Z-axis stroke Axial Drive Tool X-axis stroke Z-axis stroke Tail stock Tail stock 18 quill stroke base stroke

18 Tool Interference & Working Capacity GT-0MA 8"Chuck/12T GT-0MB 10"Chuck/12T Unit: mm inch : Spindle Center O.D. Tool Holder ø199 ø7.83 ø2 ø ø295 ø11.61 ø262 ø10.31 ø249 ø ø40 ø1.57 ø234 ø9.21 ø188 ø Max. turning dia. ø270 ø ø210 ø8 (8" chuck) Z-axis cover ø40 ø ø204 ø8.03 ø243 ø ø4 ø10 (10" chuck) ø20 ø0.79 ø650 ø.59 ø305 ø12.01 ø239 ø ø228 ø8.98 ø272 ø I.D. Tool Holder ø650 ø.59 ø177 ø6.97 ø128 ø ø214 ø8.43 ø177 ø6.97 ø4 ø10 (10" chuck dia.) ø224 ø8.82 ø181 ø ø50 ø1.97 ø20 ø Max Max ø210 ø8 (8" chuck dia.) ø20 ø0.79 ø40 ø ø129 ø5.08 ø167 ø6.57 ø180 ø7.09 ø129 ø5.08 Max. 2.6 Max. 66 ø50 ø1.97 ø20 ø Z-axis cover

19 Tool Interference & Working Capacity Unit: mm inch O.D. Turning Tool Boring Tool A B Z-axis stroke C D Tail stock 4.06 E F quill stroke Tail stock base stroke 0.7 G H I Max. turning dia. ø270 ø Z-axis stroke 3.27 A 2.72 B 560 C D E 1.54 F 700 G GT-0MA " GT-0MB " A B C D E F G H I " 22.05" 20.59" 4.06" 1.54" 0.71" 17.32" 27.56" " 20.87" 19.21" 4.49" 1.69" 0.87" 15.75" 26.73" GT-0MA GT-0MB A B C D E F G " 2.72" 22.05" 19.17" 4.06" 1.54" 27.56" " 3.07" 20.87" 17.8" 4.49" 1.69" 26.73" Face Tool Axial Drive Tool Z-axis stroke 3.27 A 1.34 B C D Z-axis stroke 3.27 A 1.85 B 560 C D E F 700 G E F 700 G GT-0MA GT-0MB A B C D E F G " 1.34" 22.05" 17.8" 4.06" 1.54" 27.56" " 1.65" 20.87" 16.42" 4.45" 1.69" 26.73" GT-0MA GT-0MB A B C D E F G " 1.85" 22.05" 18.31" 4.06" 1.54" 27.56" " 2.17" 20.87" 16.93" 4.45" 1.69" 26.69" Radial Drive Tool Z-axis stroke 3.27 A 2.72 B 560 C D E 1.54 F G Tail stock quill stroke 100 Tail stock base stroke H I 150 GT-0MA " GT-0MB " A B C D E F G H I " 22.05" 19.17" 4.06" 1.54" 0.7" 17.32" 27.56" " 20.87" 17.8" 4.45" 1.69" 1.69" 15.75" 26.69" 18

20 Max Tool Interference & Working Capacity Unit: mm inch : Spindle Center GT-300MA/LMA A 10"Chuck/12T GT-300MB/LMB 12"Chuck/12T O.D. Tool Holder ø188 ø7.40 ø234 ø ø2 ø9.92 ø220 ø8.66 ø199 ø7.83 ø650 ø ø40 ø ø295 ø11.61 ø262 ø10.31 ø249 ø Z-axis cover ø40 ø1.57 ø239 ø9.41 ø305 ø ø272 ø228 ø ø8.98 ø20 ø ø243 ø9.57 ø204 ø ø290 ø11.42 ø360 ø14.17 (Max. turning dia.) ø304 ø12 (12"chuck dia.) ø4 ø10 (10"chuck dia.) I.D. Tool Holder ø650 ø.59 ø177 ø6.97 ø128 ø ø177 ø1.97 ø214 ø ø50 ø1.97 ø20 ø Max ø4 ø10 (10"chuck dia.) ø224 ø5.04 ø181 ø ø20 ø ø40 ø1.57 ø129 ø5.08 ø180 ø7.09 ø129 ø5.08 ø50 ø1.97 ø20 ø ø167 ø6.57 ø304 ø12 (12"chuck dia.) Z-axis cover

21 Tool Interference & Working Capacity Unit: mm inch O.D. Turning Tool Boring Tool 67.8 Z-axis stroke 2.67 A B 742 C D E 1.69 F Tail stock quill stroke Tail stock (30) 100 base stroke 1.18 G Max. turrning dia. ø Z-axis stroke 2.67 A 3.07 B 742 C E 664 D F GT-300MA GT-300LMA GT-300MB GT-300LMB A B C D E F G " " " " " 1, " " 1, " " 113 1,0 4.45" 49.21" " 122 1, " 48.54" " " " " GT-300MA GT-300LMA GT-300MB GT-300LMB A B C D E F " " " " " 1, " " 1, " " 113 1, " 47.8" " 122 1, " 47.13" " " Face Tool Axial Drive Tool Z-axis stroke 2.67 A B C D Z-axis stroke 2.67 A 2.2 B C D E F E F GT-300MA GT-300LMA GT-300MB GT-300LMB A B C D E F " " Radial Drive Tool " " " 1, " " 1, " " 113 1, " 46.42" " 122 1, " 45.75" " " GT-300MA GT-300LMA GT-300MB GT-300LMB A B C D E F " " " " " 1, " " 1, " " 113 1, " 46.93" " 122 1, " 46.26" " " Z-axis stroke 2.67 A 3.07 B 742 C E 1.69 F (30) 1.18 G Tail stock quill stroke D Tail stock base stroke GT-300MA GT-300LMA GT-300MB GT-300LMB A B C D E F G " " " " " 1, " " 1, " " 113 1, " 47.8" " 122 1, " 47.13" " " " " 20

22 Spindle Motor Torque Chart -200A 6,000rpm -0A 4,500rpm kgf-m lb-ft min. 10min. 30min 1min. 10min. kw HP kgf-m lb-ft kw HP ,500 6,000 rpm ,400 4,500 rpm -200B 4,500rpm -0B/MB 3,500rpm kgf-m lb-ft kw HP kgf-m lb-ft kw HP min. 1min. 10min. 15min. 1min. 10min min. 15min ,1 3,375 4,500 rpm ,9 3,500 rpm -200MA 6,000rpm -0MA 4,500rpm kgf-m lb-ft kw HP kgf-m lb-ft kw HP min. 15min. 30min 1min. 10min. 1min. 10min min. 15min 30min ,500 4,500 6,000 rpm ,400 4,500 rpm 21

Spindle Motor Torque Chart -300A/LA 3,500rpm -380A/LA 3,000rpm kgf-m lb-ft kw HP kgf-m lb-ft kw HP 53.8 389.1 43.6 315.4 90 62.6 53.5 50.8 650.9 452.8 386.9 367.4 15min. 18.5 24.8 15.0 20.1 9.0 12.

23 Spindle Motor Torque Chart -300A/LA 3,500rpm -380A/LA 3,000rpm kgf-m lb-ft kw HP kgf-m lb-ft kw HP min min ,012 3,500 rpm ,7 3,000 rpm -300B/LB/MB/LMB 3,000rpm -380B/LB 2,000rpm kgf-m lb-ft kw HP kgf-m lb-ft kw HP min min. 15min min ,7 3,000 rpm ,150 2,000 rpm -300MA/LMA 3,500rpm kgf-m lb-ft kw HP min. 15min ,012 3,500 rpm 22

Machine Dimensions GT-200A/ B/MA, GT-0 A/ B/MA/ MB, GT-300LMA/ LMB Unit: mm inch E H D J C P I K Rear Mount Chip Conveyor

Model A B C D E F G H I J K L M N O P Q GT-200A/B/MA 2,215 87.2" 1,805 71.06" 1,835 72.24" 1,020 40.16" 333 13.11" 1,060 41.

58" - GT-0A/MA GT-0B/MB 2,680 105.51" 1,885 74.21" 2,750 108.27" 1,885 74.21" 1,060 41.73" 375 14.76" 1,030 40.55" 1,630 64.

65" GT-300LMA/LMB 3,870 2,086 121.54" 82.13" 2,015 79.33" 1,060 41.73" 416 16.38" 980 38.58" 2,320 91.34" 975 38.39" 640.

24 Machine Dimensions GT-200A/ B/MA, GT-0 A/ B/MA/ MB, GT-300LMA/ LMB Unit: mm inch E H D J C P I K Rear Mount Chip Conveyor Installation Space Requirement M M Q L N (Door Open) O A F G Side Mount Chip Conveyor Installation Space Requirement B Reference Model A B C D E F G H I J K L M N O P Q GT-200A/B/MA 2, " 1, " 1, " 1, " " 1, " 1, " " " " 1, " " " " - 2, " - GT-0A/MA GT-0B/MB 2, " 1, " 2, " 1, " 1, " " 1, " 1, " " " " 1, " " " " - 2, " 21.65" GT-300LMA/LMB 3,870 2, " 82.13" 2, " 1, " " " 2, " " 640.2" " 1, " " " " " 2, " - Due to the design variation, dimensional drawings shown here are for references only. Note: This is aesthetic sheet metal. 23

GT-300A/ B/MA/ MB/LA/ LB, GT-380A/ B/LA/ LB Unit: mm inch Rear Mount Chip Conveyor Installation Space Requirement M K K M Rear Side Chip Conveyor (opt.) Rear Side Chip Conveyor (opt.

K L M N O GT-300A/B/MA 3,230 127.17" GT-300MB 3,5 128.15" 2,042 80.39" 2,015 79.33" 1,060 41.73" 1,200 47.24" 1,950 76.77" 646.43" 959 37.76" - GT-300LA/LB 3,845 151.38" 2,047 80.59" 416 16.

33" 1,115 43.9" 1,150 45.28" 920 36.22" 1,950 76.77" 2,320 91.34" 646.43" 959 37.76" Due to the design variation, dimensional drawings shown here are for references only.

25 GT-300A/ B/MA/ MB/LA/ LB, GT-380A/ B/LA/ LB Unit: mm inch Rear Mount Chip Conveyor Installation Space Requirement M K K M Rear Side Chip Conveyor (opt.) Rear Side Chip Conveyor (opt.) M M L L Right Side Chip Conveyor B I N (Door Open) O E B I N (Door Open) O E H D J H D J C C A F G Side Mount Chip Conveyor A F Installation Space G Requirement Reference Model A B C D E F G H I J K L M N O GT-300A/B/MA 3, " GT-300MB 3, " 2, " 2, " 1, " 1, " 1, " " " - GT-300LA/LB 3, " 2, " " " 2, " " 640.2" " 1, " " " " " GT-380A/B GT-380LA/LB 3, " 3, " 2, " 2, " 2, " 1, " 1, " " 1, " 2, " " " Due to the design variation, dimensional drawings shown here are for references only. Note: This is non-aesthetic sheet metal; it will be replaced with aesthetic design in the near future. Dimensions will be modified due to aesthetic design of sheet metal.the manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performance of the machine without notice. All the specifications shown above are just for reference " " " 24

26 GT Series Specifications MACHINING CAPACITY Swing Over Bed Swing Over Carriage Max. Turning Diameter Max. Turning Length ITEMS GT-200A GT-200MA GT-200B ø260 mm (ø200mm*) ø10.24" (ø7.87" *) 360 mm (340mm*) 14.17"(13.39" *) ø500 mm ø19.69" ø330 mm ø12.99" ø230 mm ø9.06" 370 mm 14.57" ø260 mm (ø200mm*) ø10.24" (ø7.87" *) 345 mm (3mm*) 13.58"(12.8" *) Distance Between Center 512 mm 20.16" 506 mm 19.92" 509 mm 20.04" SPINDLE The mark* stands for VDI30 type. Height Between Spindle Center 990 mm 38.98" 1,020 mm 40.16" 990 mm 38.98" and Ground Chuck Diameter 6" Chuck 8" Chuck Spindle Nose A2-5 A2-6 Front Bearing Diameter ø90 mm ø3.54" ø100 mm ø3.94" Hole Through Spindle ø56 mm ø2.2" ø62 mm ø2.44" Hole Through Draw Tube ø45 mm ø1.77" ø52 mm ø2.05" Spindle Speed 6,000 rpm 4,500 rpm Max. Spindle torque 11.9 kgf-m lb-ft kgf-m lb-ft 19.5 kgf-m lb-ft C-axis Index Accuracy MAIN TRAVEL X-axis Travel Z-axis Travel FEEDRATE 150 mm (170mm*) " (6.69" *) 360 mm (340mm*) 14.17" (13.39" *) 177 mm 6.97" 370 mm 14.57" 150 mm (170mm*) " (6.69" *) 345 mm (3mm*) 13.58" (12.8" *) Rapid Feedrate (X/Z) 24 / 30 m/min. 945 / 1,181 ipm Cutting Feedrate 1~10,000 mm/min. 0.04~394 ipm MOTOR Spindle Motor 5.5 / 7.5 / 9 / 11 kw 7 / 10 / 12 / 15 HP (L) 3.7 / 7.5 (H) 5.5 / 7.5 / 9 / 11 kw (L) 5 /10 (H) 7 / 10 / 12 / 15 HP Turret Motor 1.2 kw 1.6 HP 0.75 kw 1.01 HP 1.2 kw 1.6 HP VDI Live Tool Motor kw 4.96 HP - TURRET Type of Index Turret Tool Magazine Capacity Servo Hydraulic Control (Hydraulic Clamp) Std. Tool 12T (10T) - 10T (12T) VDI 12T* 12T 12T* Shank Height for Square Tool 20 mm 3/4" mm 1" Shank Diameter for Boring Bar ø40 mm ø1&1/2" ø32 mm ø1&1/4" ø40 mm ø1&1/2" Swing Over Turret ø490 mm (550mm*) ø19.29" (21.65" *) ø560 mm ø22.05" ø490 mm (550mm*) ø19.29" (21.65" *) VDI Live Tool Speed - 4,500 rpm - Torque of Milling Tool Motor kgf-m lb-ft - TAILSTOCK Tailstock Quill Taper- Stationary Center (std.) Tailstock Quill Taper- Live Center (opt.) Tailstock Quill Diameter MT-4 - ø75 mm ø2.95" Tailstock Quill Stroke 100 mm 3.94" Tailstock Stroke 260 mm 10.24" GENERAL Power Consumption (Transformer) kva ( kva) 24.92kVA (30kVA) kva ( kva) Machine Weight 4,210 kg 9,281 lb 4,260 kg 9,392 lb 4,210 kg 9,281 lb The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.

27 GT Series Specifications MACHINING CAPACITY Swing Over Bed ITEMS GT-0A GT-0MA GT-0B GT-0MB ø550 mm ø21.65" The mark*1 stands for VDI40 type. The mark*2 stands for big bore type. Swing Over Carriage Max. Turning Diameter Max. Turning Length Distance Between Center SPINDLE ø350 mm (ø270 mm* 1 ) ø13.78" (ø10.63" * 1 ) 560 mm 22.05" 700 mm 27.56" ø270 mm ø10.63" ø420 mm ø16.54" ø350 mm (ø270 mm* 1 ) ø13.78" (ø10.63" * 1 ) 515 mm (530mm* 1 ) 20.28" (20.87" * 1 ) 678 mm (679mm* 1 ) 26.69" (26.73" * 1 ) Height Between Spindle Center 1,060 mm 41.73" and Ground Chuck Diameter 8" Chuck 10" Chuck ø270 mm ø10.63" 530 mm 20.87" 679 mm 26.73" Spindle Nose A2-6 A2-8 Front Bearing Diameter ø110 mm ø4.33" ø130 mm ø5.12" Hole Through Spindle ø62 mm (ø77 mm* 2 ) ø2.44"(ø3.03" * 2 ) ø88 mm ø3.46" Hole Through Draw Tube ø52 mm (ø66 mm* 2 ) ø2.05" (ø2.6" * 2 ) ø75 mm ø2.95" Spindle Speed 4,500 rpm 3,500 rpm Max. Spindle torque 34.4 kgf-m lb-ft 51.6 kgf-m lb-ft 58.9 kgf-m lb-ft C-axis Index Accuracy MAIN TRAVEL X-axis Travel Z-axis Travel FEEDRATE 195 mm (230 mm* 1 ) 7.68" (9.06" * 1 ) 560 mm 22.05" 230 mm 9.06" 195 mm (230 mm* 1 ) 7.68" (9.06" * 1 ) 515 mm (530 mm* 1 ) 20.28" (20.87" * 1 ) 230 mm 9.06" 530 mm 20.87" Rapid Feedrate (X/Z) 20 / 24 m/min. 787 / 945 ipm Cutting Feedrate 1~10,000 mm/min. 0.04~394 ipm MOTOR Spindle Motor 11 / 15 kw 15 / 20 HP (L) 7.5 / 15 (H) 11 / 15 kw (L) 10 / 20 (H) 15 / 20 HP Turret Motor 1.2 kw 1.6 HP VDI Live Tool Motor kw 7.38 HP kw 7.38 HP TURRET Type of Index Turret Tool Magazine Capacity Servo Hydraulic Control (Hydraulic Clamp) Std. Tool 12T(10T) - 10T(12T) - VDI 12T* 1 12T 12T* 1 12T Shank Height for Square Tool mm 1" Shank Diameter for Boring Bar Swing Over Turret ø585 mm (ø650mm* 1 ) ø23.03" (ø.59" * 1 ) ø650 mm ø.59" ø40 mm ø1&1/2" ø585 mm (ø650mm* 1 ) ø23.03" (ø.59" * 1 ) ø650 mm ø.59" VDI Live Tool Speed - 3,000 rpm - 3,000 rpm Torque of Milling Tool Motor kgf-m.8 lb-ft kgf-m.8 lb-ft TAILSTOCK Tailstock Quill Taper- Stationary Center (std.) Tailstock Quill Taper- Live Center (opt.) Tailstock Quill Diameter MT-5 MT-4 ø100 mm ø3.94" Tailstock Quill Stroke 100 mm 3.94" Tailstock Stroke GENERAL 440 mm 17.32" 415 mm (400 mm* 1 ) 16.34" (15.75" * 1 ) 400 mm 15.75" Power Consumption (Transformer) 27.9 kva (30 kva) 33.9 kva (40 kva) 27.9 kva (30 kva) 33.9 kva (40 kva) Machine Weight 6,000 kg 13,228 lb 6,200 kg 13,669 lb The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference. 26

28 GT Series Specifications The mark* stands for VDI40 type. 27 ITEMS GT-300A GT-300LA GT-300MA GT-300LMA GT-300B GT-300LB GT-300MB GT-300LMB MACHINING CAPACITY Swing Over Bed Swing Over Carriage Max. Turning Diameter Max. Turning Length Distance Between Center SPINDLE ø440 mm (ø360 mm*) ø17.32" ( ø14.17" *) 712 mm(742mm*) 28.03"(29.21" *) 891 mm (888mm*) 35.08" (34.96" *) ø360 mm ø14.17" ø600 mm ø23.62" ø450 mm ø17.72" 1,262 mm (1,292mm*) 49.69"(50.87" *) 742 mm 29.21" 1,292 mm 50.87" 1,441 mm (1,438mm*) 56.73"(56.61" *) 891 mm 35.08" 1,441 mm 56.73" ø440 mm (ø360 mm*) ø17.32" (ø14.17" *) 700 mm (730mm*) 27.56" (28.74" *) 891 mm (888mm*) 35.08" (34.96" *) Height Between Spindle Center 1,060 mm 41.73" and Ground Chuck Diameter 10" Chuck 12" Chuck Spindle Nose A2-8 A2-8 ø360 mm ø14.17" 1,0 mm (1,280mm*) 49.21"(50.39" *) 683 mm 26.89" 1,233 mm 48.43" 1,441 mm (1,438mm*) 56.73"(56.61" *) 891 mm 35.08" 1,441 mm 56.73" Front Bearing Diameter ø130 mm ø5.12" ø160 mm ø6.3" Hole Through Spindle ø88 mm ø3.46" ø105 mm ø4.13" Hole Through Draw Tube ø75 mm ø2.95" ø91 mm ø3.58" Spindle Speed 3,500 rpm 3,000 rpm Max. Spindle torque 53.7 kgf-m lb-ft 77.3 kgf-m lb-ft 90 kgf-m lb-ft C-axis Index Accuracy MAIN TRAVEL X-axis Travel Z-axis Travel FEEDRATE Rapid Feedrate (X/Z) Cutting Feedrate MOTOR 245 mm (275 mm*) 9.65" (10.83" *) 712 mm (742 mm*) 28.03" (29.21" *) 275 mm 10.83" 1,262 mm (1,292mm*) 49.69" (50.87"*) 742 mm 29.21" 1,292 mm 50.87" 245 mm (275mm*) 9.65" (10.83" *) 700 mm (730mm*) 27.56" (28.74" *) 20/24 m/min. 787/945 ipm 1~10,000 mm/min. 0.04~394 ipm Spindle Motor 15/18.5 kw 20/ HP (L)11/18.5 (H)15/18.5 kw (L)15/ (H)20/ HP Turret Motor 1.2 kw 1.6 HP 275 mm 10.83" 1,0 mm (1,280mm*) 49.21"(50.39"*) 733 mm 28.86" 1,283 mm 50.51" VDI Live Tool Motor kw 7.38 HP kw 7.38 HP TURRET Type of Index Servo Hydraulic Control (Hydraulic Clamp) Turret Tool Std. Tool 10T (8T) - 8T (10T) - Magazine Capacity VDI 12T* 12T 12T* 12T 32 mm 1&1/4" Shank Height for Square Tool mm 1" mm 1" ( mm*) ( 1" *) ø50 mm (ø40 mm*) ø50 mm (ø40 mm*) Shank Diameter for Boring Bar ø40 mm ø1&1/2" ø40 mm ø1&1/2" ø2" (ø1&1/2" *) ø2" (ø1&1/2" *) Swing Over Turret ø620 mm (ø650 mm*) ø24.41" (ø.59" *) ø650 mm ø.59" ø610 mm (ø650 mm*) ø24.02" (ø.59" *) ø650 mm ø.59" VDI Live Tool Speed - 3,000 rpm - 3,000 rpm Torque of Milling Tool Motor kgf-m.82 lb-ft kgf-m.82 lb-ft TAILSTOCK Tailstock Quill Taper- Stationary Center (std.) Tailstock Quill Taper- Live Center (opt.) Tailstock Quill Diameter MT-5 MT-4 ø100 mm ø3.94" Tailstock Quill Stroke 100 mm 3.94" Tailstock Stroke GENERAL Power Consumption (Transformer) Machine Weight 605 mm 23.82" kva (40 kva) 6,950 kg 15,322 lb 1,155mm 45.47" kva (40 kva) 7,850 kg 17,306 lb 605 mm 23.82" kva (45 kva) 6,950 kg 15,322 lb 1,155 mm 45.47" kva (45 kva) 7,850 kg 17,306 lb 605 mm 23.82" kva (40 kva) 6,950 kg 15,322 lb 1,155 mm (1,152mm*) 45.47"(45.35"*) kva (40 kva) 7,850 kg 17,306 lb The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference. 605 mm 23.82" kva (45 kva) 6,950 kg 15,322 lb 1,155 mm 45.47" kva (45 kva) 7,850 kg 17,306 lb

29 GT Series Specifications MACHINING CAPACITY ITEMS GT-380A GT-380B GT-380LA GT-380LB Swing Over Bed Swing Over Carriage Max. Turning Diameter ø700 mm ø27.56" ø570 mm ø22.44" ø560 mm ø22.05" Max. Turning Length 715 mm 28.15" 680 mm 26.77" 1,265 mm 49.8" 1,230 mm 48.43" Distance Between Center 891 mm 35.08" 1,441 mm 56.73" SPINDLE Height Between Spindle Center 1,115 mm 43.9" and Ground Chuck Diameter 12" Chuck 15" Chuck 12" Chuck 15" Chuck Spindle Nose A2-8 Front Bearing Diameter Hole Through Spindle Hole Through Draw Tube ø160 mm ø6.3" ø105 mm ø4.13" ø91 mm ø3.58" Spindle Speed 3,000 rpm 2,000 rpm 3,000 rpm 2,000 rpm Max. Spindle torque C-axis Index Accuracy MAIN TRAVEL 90 kgf-m lb-ft 135 kgf-m lb-ft X-axis Travel 305 mm 12" - 90 kgf-m lb-ft 135 kgf-m lb-ft Z-axis Travel 715 mm 28.15" 680 mm 26.77" 1,265 mm 49.8" 1,230 mm 48.43" FEEDRATE Rapid Feedrate (X/Z) Cutting Feedrate 20/24 m/min. 787/945 ipm 1~10,000 mm/min. 0.04~394 ipm MOTOR Spindle Motor Turret Motor VDI Live Tool Motor TURRET Type of Index Turret Tool Magazine Capacity Shank Height for Square Tool (L)11/18.5 (H)15/18.5 kw (L)15/ (H)20/ HP 1.2 kw 1.6 HP - Servo Hydraulic Control (Hydraulic Clamp) 10T 32 mm 1&1/4" Shank Diameter for Boring Bar ø50 mm ø2" Swing Over Turret VDI Live Tool Speed Torque of Milling Tool Motor TAILSTOCK Tailstock Quill Taper- Stationary Center (std.) Tailstock Quill Taper- Live Center (opt.) Tailstock Quill Diameter ø686 mm ø27.01" - - MT-5 MT-4 ø100 mm ø3.94" Tailstock Quill Stroke 100 mm 3.94" Tailstock Stroke 605 mm 23.82" 520 mm 20.47" 1,155 mm 45.47" 1,070 mm 42.13" GENERAL Power Consumption (Transformer) kva (40 kva) kva (40 kva) Machine Weight 7,520 kg 16,579 lb 7,570 kg 16,689 lb 7,980 kg 17,593 lb 8,030 kg 17,703 lb The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference. 28

Accessories Table GT-200A/B GT-200MA GT-0A/B GT-0MA/MB Tool Kit Work Lamp Pilot Lamp Hydraulic System Air Gun Coolant Equipment System Hydraulic Hollow Cylinder Leveling Blocks and Bolts Full Chip

Cooler for Electrical Cabinet Mechanical, Electrical & Operating Manuals CNC Control TXP-100FA TXP-200FA Central Automatic Lubrication System (Piston Type) Hard and Soft Jaws 1 set Tailstock

30 Accessories Table GT-200A/B GT-200MA GT-0A/B GT-0MA/MB Tool Kit Work Lamp Pilot Lamp Hydraulic System Air Gun Coolant Equipment System Hydraulic Hollow Cylinder Leveling Blocks and Bolts Full Chip Enclosure Chuck Switch Pedal Heat Exchanger for Electrical Cabinet A/C. Cooler for Electrical Cabinet Mechanical, Electrical & Operating Manuals CNC Control TXP-100FA TXP-200FA Central Automatic Lubrication System (Piston Type) Hard and Soft Jaws 1 set Tailstock Stationary Quill Type Center Shaft Live Quill Type Manual Lock (Block) Tailstock Positioning Programmable Hydraulic Clamp Chip Right Side Conveyor Rear Side Automatic Door Safety Door Collet Chuck Chuck Air Blast Foundation Screw Bolt Oil-mist Collector Additional Hard and Soft Jaws Oil Skimmer Paper Filter Soft Jaw Former Tailstock Pedal Coolant Gun Parts Catcher System Workpiece Length Setter Heavy Duty Coolant Pump (MTH2-40/4) Auto Tool Length Measurement System (RENISHAW HPMA) : Standard : Optional : None Bar Feeder or Only Software VDI Tool holders and Milling Tool Attachments Parts Catcher Parts Conveyor Hydraulic System Central Lubrication System 29

Accessories Table : Standard : Optional : None GT-300A/B/LA/LB GT-300MA/MB/LMA/LMB GT-380A/B/LA/LB Tool Kit Work Lamp Pilot Lamp Hydraulic System Air Gun Coolant Equipment System Hydraulic Hollow

31 Accessories Table : Standard : Optional : None GT-300A/B/LA/LB GT-300MA/MB/LMA/LMB GT-380A/B/LA/LB Tool Kit Work Lamp Pilot Lamp Hydraulic System Air Gun Coolant Equipment System Hydraulic Hollow Cylinder Leveling Blocks and Bolts Full Chip Enclosure Chuck Switch Pedal Heat Exchanger for Electrical Cabinet A/C. Cooler for Electrical Cabinet Mechanical, Electrical & Operating Manuals CNC Control TXP-100FA TXP-200FA Central Automatic Lubrication System (Piston Type) Hard and Soft Jaws 1 set Tailstock Stationary Quill Type Center Shaft Live Quill Type WW Manual Lock (Block) Tailstock Positioning Programmable Hydraulic Clamp Chip Conveyor Right Side Rear Side Automatic Door Safety Door Collet Chuck Chuck Air Blast Foundation Screw Bolt Oil-mist Collector Additional Hard and Soft Jaws Oil Skimmer Paper Filter Soft Jaw Former Tailstock Pedal Coolant Gun Parts Catcher System Workpiece Length Setter Heavy Duty Coolant Pump (MTH2-40/4) Auto Tool Length Measurement System (RENISHAW HPMA) Bar Feeder or Only Software VDI Tool holders and Milling Tool Attachments Parts Catcher Parts Conveyor Auto Tool Length Measurement System Chip Conveyor 30

FP High Precision High Performance Die Mold Vertical Machining Center FP66A, FP100A, NFP66A NXV High Performance Vertical Machining Center NXV560A, NXV560A-APC, NXV1020A/AM, NXV1380A, NXV1680A/B TV

High Performance Vertical Machining Center WVA/B NFX High Performance 5-axis Vertical Machining Center NFX380A NSV Ultra High Performance Vertical Machining Center NSV66A, NSV102A/AM, NSV156A/AM TCV

DCV3016B~6035B, DCV2018A~4018A-5AX, DCV4030B~6030B-5AX, 30B-5AX, DCV4030B-5AF NDC High Performance Double Column Vertical Machining Center NDC2016B~4016B, NDC3022B~6027B, NDC2018B~4018B-AHC,

Turning Center GT-200A/B/MA, GT-0A/B/MA/MB, GT-300A/B/LA/LB/MA/MB/LMA/LMB, GT-380A/B/LA/LB TC High Performance High Precision CNC Lathe TC-16A/B/LA/LB/MA/MB/LMA/LMB, TC-26, TC-26L, TC-36, TC-36W,

32 FP High Precision High Performance Die Mold Vertical Machining Center FP66A, FP100A, NFP66A NXV High Performance Vertical Machining Center NXV560A, NXV560A-APC, NXV1020A/AM, NXV1380A, NXV1680A/B TV TV116B, TV146B, TV158B, TV188B, TV2110B, TV2610B NTV NTVA/B NMV NMV76A, NMV106A WV High Efficiency T-base Vertical Machining Center High Performance High Rigidity Vertical Machining Center Ultra Wide High Performance Vertical Machining Center WVA/B NFX High Performance 5-axis Vertical Machining Center NFX380A NSV Ultra High Performance Vertical Machining Center NSV66A, NSV102A/AM, NSV156A/AM TCV High Performance Traveling Column Vertical Machining Center TCV2000A, TCV3000A, TCV4500B, TCV2300A-4A, TCV3000A-4A/5AF/5AXAX DCV Advanced Double Column Vertical Machining Center DCV2012A/B, DCV3016B~6035B, DCV2018A~4018A-5AX, DCV4030B~6030B-5AX, 30B-5AX, DCV4030B-5AF NDC High Performance Double Column Vertical Machining Center NDC2016B~4016B, NDC3022B~6027B, NDC2018B~4018B-AHC, NDC3022B~6027B-AHC H H2612B NH High Speed High Precision Horizontal Machining Center NH630B, NH800B NT High Performance Mill/Turn Center NT-2000Y/SY, NT-00Y/SY, NT-2000SY2 GT High Performance Geo Turning Center GT-200A/B/MA, GT-0A/B/MA/MB, GT-300A/B/LA/LB/MA/MB/LMA/LMB, GT-380A/B/LA/LB TC High Performance High Precision CNC Lathe TC-16A/B/LA/LB/MA/MB/LMA/LMB, TC-26, TC-26L, TC-36, TC-36W, TC-46, TC-46M NTC High Efficiency CNC Turning Center NTC-1600/M/Y/L/LM/LS/LY/LSY, NTC-2000/M/Y/L/LM/LS/LY/LSY Remote Monitoring System A remote monitoring system YEONG CHIN MACHINERY INDUSTRIES CO., LTD. No. 888, Sec. 1, Homu Road, Shengang District, Taichung 42953, Taiwan Tel : Fax: Web Page: E

High Performance Heavy Duty Lathe

High Performance Heavy Duty Lathe TC-46M series is the most powerful and rigid CNC lathe in its class. Designed with the latest technology and excellent equipment for highest material removal rate and