SHINGLE KEY FEATURES 16" " 14" " 19" " Premium Range A. Standard Range. light blue (LB) green (GR) yellow (Y) orange (O) red (R)

Transcription

1 SHINGLE S Luxxbox s Shingle forms part of acoustic pendant range. Made from 0.3inch acoustic panels, the Shingle is available in a range of energyefficient light sources to help bring the hush to open spaces. KEY FEATURES 0 16" " L 3 14" M " Available in 3 sizes and a wide range of colors Segments made from 0.3 acoustic panels Effective sound absorption Supplied with 3 suspension cables, 9 total length, height adjustable Supplied with 9.8 woven power cable Suitable for indoor environments Class A, FS:5 - SD:25 fire rated (USA) Minimum 65% recycled material IES files available ELV dimming compatible Acoustic properties independently tested Optional E26 lamp holder or upwards LED wash lighting available Premium Range A light blue (LB) green (GR) yellow (Y) orange (O) red (R) " black (B) dark blue (DB) light green (LGR) Standard Range " white (W) off white (OW) light grey (LG) mid grey (MG) charcoal (C)

2 SHINGLE HOW TO SPECIFY LX-SI = (Size) - (Color) - (Color temperature) - (Dimming) - (Voltage) Size Shade Color Color temperature Dimming Voltage S = dia 16 1 / 4 x 11 3 / 4 H M = dia 20 1 / 4 x 14 1 / 4 H Specify color 35 = 3500k 0 10V* 277V L = dia 25 1 / 2 x 19 3 / 4 H = 00k ELV = ELV compatible 120V 40 = 4000k Example: LX-SI-S-DB-35-ELV-120V = Luxxbox Shingle, small, dark blue, 3500k, ELV dimming 10mp, 120VAC * 0-10V dimming options available upon request NB: Upwash not available for small and medium pendants. LIGHT SOURCE SPECIFICATIONS All Shingle LED luminaires are equipped with LED boards of the following specifcation: S 2500 lumen, 120VAC, CRI 80, 29W M 2500 lumen, 120VAC, CRI 80, 39.5W L 00 lumen, 120VAC, CRI 80, 61W DIMMING OPTIONS 100%-10% dimming is compatible with the following ELV dimmers: Lutron Nova NLV-0-WH Lutron Maestro MAELV-0-WH Lutron Diva DVELV-3P-WH Leviton VIZIA + Decora Cat-NO.VPE06-1LZ Leviton Decora DSE06-10Z Leviton Illumatech Slide Dimmer IPE04-1LZ LUMINOUS INTENSITY DISTRIBUTION Small Medium Large cd 1249cd 1198cd

3 SHINGLE SUSPENSION LOCATIONS Small Suspension cable PCD = 85mm / points equally spaced at 120 Large Suspension cable PCD = 315mm / points equally spaced at 120 Medium Suspension cable PCD = 185mm / points equally spaced at 120

4 SHINGLE INSTALLATION Before starting, determine which fasteners will be best suited to secure the fitting, based on the material of the ceiling substrate. GND 1. Mount canopy base to ceiling 1 2. Insert power cable into canopy cover. Adust lengths of cable and trim if necessary. GND Fasten power cable strain relief grub screw 3 4. Connect line voltage to terminals provided, making sure you connect the ground wire 2 5. Place canopy over canopy mount and fasten 3x screws NOTE: Line voltage fittings must be installed by a qualified electrician, in accordance with local electrical laws

5 SHINGLE - BOTTOM ROW ASSEMBLY! Your new Shingle light ay have been provided without the bottom row to save you money on shipping and to avoid damage in transit Flexing the shingle slightly, hook one side of the shingle on to the barbed ring plate 2. With one side on, push the barb through the slot in the shingle, it should pop on

6 SHINGLE - BOTTOM ROW ASSEMBLY (CONT D) 3. Once you ve got one down, keep going until the whole bottom row of shingles are attached.

7 STANDARD CEILING MOUNT - INSTALLATION 2m MAX B

8 STANDARD CEILING MOUNT - INSTALLATION Masonry plug, wall mate or similar - type to be determined by installer. Not supplied. Ceiling mount, Supplied 8.5 max Screw in to ceiling substrate - type to be determined by installer. Not Supplied Cable gripper with grip lock nipple. Supplied. 1.2mm Stainless suspension cable. Supplied.

9 STANDARD CEILING MOUNT - INSTALLATION Shown assembled Trim cable as necessary