TruLine TruQuad.5A 24VDC - PLASTER-IN LED SYSTEM

Transcription

1 Drywall Drywall with Plaster & Paint 6" (15.2cm) 2.62" (6.7cm) 6" (15.2cm) 2" (5.1cm) 6" - 400" (15.2cm cm) 6" - 400" (15.2cm cm) 6" - 400" (15.2cm cm) 0.63" (1.6cm) DESCRIPTION TruQuad.5A, a versatile 24VDC linear plaster-in LED system, creates a glare-free, smooth line of light indoor architectural lighting. The system recesses into 5/8" thick drywall without joist modification. May be secured to studs that are spaced 13"-24" apart, or between studs with mounting clips provided. Sold in 1" increments from 6"-400" (6"-384" for RGB+W). Several color temperature options are available, including 2200K-5700K (ELV/010), Warm Dim (ELV), Tunable White (ELV/010/DMX), RGB and RGB+W (DMX). High CRI commercial-grade White or Dynamic Color Changing LED Soft Strip projects a clean line of light. Coordinate installation with electrician and drywall contractors. Includes a 5 year pro-rated warranty. DESIGN NOTE TruQuad can be installed on a single surface (wall or ceiling) and allows for the creation of personalized square or rectangular configurations. LED Soft Strip mounts to side wall of the channel, wrapping continuously to create seamless illumination. APPLICATIONS Indoor damp or dry locations only. General illumination and architectural accent for Kitchens, Offices, Hospitality, Retail, Residences, Libraries, Hallways, and Bath/Vanity. LAMP The average LED Life is 50,000 hours. WATTS LUMENS 85+CRI 90+CRI 92+CRI 95+CRI RGB RGB+W PER FOOT PER WATT PER FOOT 22K, 35K, 40K, 57K 2K4K 27D, 30D 27K, 30K 2WDC (2.5WDC) 5WDC WDC N/A N/A Lumen values are based on the 3000K LED test. REMOTE POWER SUPPLIES*, DIMMERS & CONTROLS (SOLD SEPARATELY) Electronic Low Voltage Dimming (ELV) 0-10 Volt Dimming (0-10V) Dynamic Color Changing (DMX) *In-Wall Mounting Kits available for select power supplies INCLUDED COMPONENTS TruLine.5A Channel(s), Power Channel Connector(s) with Junction Box, Channel Joiners, Mounting Straps, Drywall Screws, LED Soft Strip, and Lens(es) System Watts Per Foot Short Side Long Side Color Temperature TL.5A 2W 6 X K TL.5A TruLine.5A 2W 5W 6W 2.5 Watts 5 Watts 6 Watts For custom design and layout assistance, send drawings to design@pureedgelighting.com 480" for 5W Strip, 960" Max for 2W Strip and 192" for 6W 6"- 400" (1" increments) per side, RGBW max 384" 22K 27K 27D 30K 30D 35K 40K 57K 2K4K RGB RGBW 2200K Amber White 2700K Very Warm White 2700K Warm Dim (5WDC Only) 3000K Warm White 3000K Warm Dim (5WDC Only) 3500K Neutral White 4000K Cool White 5700K Daylight White 2000K K Tunable White (5WDC Only) Red, Green, and Blue (5WDC Only) Red, Green, Blue, and 2000K White (6WDC Only) 1

2 INCLUDED COMPONENTS A B F G A C D E C A. POWER CHANNEL CONNECTORS WITH JUNCTION BOX TruQuad includes 1, 2 or 4 L-Picture Frame Power Channel Connectors based on max wattage of design. Low Voltage 24VDC wires from Remote Power Supply connect to LED wires inside Junction box. Junction Box opening is covered by the channel and comes with Adjustable Mounting Bars. Required at the beginning of each run and necessary to rough-in electrical before TruQuad installation. B. TruQuad.5A CHANNEL 5/8" deep extrusion houses a single row of commercial-grade White or Dynamic Color Changing LED Soft Strip. C. CHANNEL JOINERS Channel Joiners ship as a pair to connect two channels together. Additional channel joiners may be necessary based on lighting design. D. MOUNTING STRAP Secures channel to drywall when wall stud is unavailable. E. DRYWALL SCREW Secures channel to drywall and stud. F. LED SOFT STRIP Commercial-grade White or Dynamic Color Changing LED Soft Strip. G. LENS 0.5" wide diffuser lens projects a clean line of light without LED dots. 2" (5.1cm) 3.75" (9.5cm) 2.62" (6.7cm) 1.06" (2.7cm) 2.66" (2.8cm) JUNCTION BOX ROUGH-IN COMPONENT One Junction Box is included with TruQuad.5A. Order additional Junction Box separately to rough-in electrical wiring before drywall installation. Quick shipment available. System Size Component TL.5A 1RE JBOX TL.5A TruLine.5A 1RE 1" Rectangle JBOX Juncation Box 2

3 INSTALLATION A B E F C D A. DIMMER OR SWITCH B. 120VAC WIRING C. 120V/24VDC REMOTE POWER SUPPLY WITH IN-WALL MOUNTING KIT D. 24VDC, CLASS 2 WIRING E. L-PICTURE FRAME POWER CHANNEL CONNECTOR WITH JUNCTION BOX F. TruQuad CHANNEL LED mounted on the side of the channel 3

4 APPLICATION POWER SUPPLY 0-10V dimming for TruQuad.5A Channel PSB-96W VDC (24VDC 96W output) PSB-2X96W VDC (24VDC 2X96W output) DIMMING Radio Ra2 (with GRX-TVI), Grafik Eye Qs (with GRX-TVI), Diva (with PP20); Nova T; Philips: Sunrise SR1200ZTUNV; Leviton: IP710-LF 0-10V Dimmer 96W, 24VDC LOW VOLTAGE WIRE SIZE CHART: 3% VOLTAGE DROP RED 120VAC (LOAD) GND WIRE LENGTH (FT) UP TO 33FT 34FT 52FT 53FT 86FT 87FT 130FT WIRE SIZE 14 AWG 12 AWG 13 AWG 8 AWG VOLTAGE AT END OF WIRE 23.28VDC 23.29VDC 23.28VDC 23.28VDC GRAY 0-10V PURPLE 0-10V GND PSB-96W VDC POWER SUPPLY +24VDC -24VDC GRAY 0-10V PURPLE 0-10V INPUT VAC BLACK (LINE) WHITE (NEUTRAL) 4

5 TM DATA The data below is for SS2C and SS5C bare LED Soft Strips. Consistent color temperatures throughout a single strip and among multiple strips is possible through a 3 phase binning process in which each order is inspected with a color meter to ensure uniformity. 2200K Rf: 83.9 Rg: K Rf: 87.7 Rg: % 1.8% % 7.0% % 8.9% % 2.4% % 1.9% % -0.2% % -2.7% % 2.7% % 6.5% % 10.0% % 9.4% % 2.6% % -12.4% % -21.9% % -7.5% % -12.0% % 2.3% % 3.1% % 3.8% % 1.1% % 0.2% % -0.8% % 2.5% % 3.2% % 8.1% % 10.8% % 8.9% % -1.4% % -7.9% % -10.4% % -2.7% % -10.9% 3000K Rf: 88.1 Rg: K Rf: 86.1 Rg: % -0.3% % 4.3% % 7.9% % 4.7% % 3.5% % -1.7% % -4.4% % -2.2% % 2.3% % 7.8% % 11.0% % 3.8% % -3.6% % -8.4% % -5.7% % -12.0% % 3.4% % 1.8% % 0.4% % -4.1% % -2.7% % -0.4% % 6.5% % 5.7% % 11.8% % 11.4% % 6.1% % -4.6% % -9.6% % -10.4% % -5.3% % -5.7% 4000K Rf: 87.6 Rg: K Rf: 80.3 Rg: % 2.1% % 1.3% % 0.7% % -2.3% % -1.8% % 0.1% % 3.6% % 7.0% % 12.4% % 11.4% % 8.7% % -0.3% % -6.3% % -3.8% % -4.5% % -5.0% % 2.6% % 5.8% % 5.5% % 1.3% % 0.6% % -2.2% % 1.2% % 8.5% % 18.8% % 18.0% % 12.0% % -1.6% % -9.5% % -10.0% % -22.8% % -1.0% 5

6 TM DATA The data below is for SS2C and SS5C bare LED Soft Strips. Consistent color temperatures throughout a single strip and among multiple strips is possible through a 3 phase binning process in which each order is inspected with a color meter to ensure uniformity. 2700D Rf: 89.5 Rg: D Rf: 89.8 Rg: % 1.4% % 4.1% % 5.9% % 1.0% % 1.7% % -0.2% % -2.4% % -1.1% % 3.7% % 6.1% % 7.4% % -0.9% % -8.1% % -11.0% % -4.3% % -11.1% % 1.5% % 3.7% % 5.5% % 0.6% % 1.6% % -0.2% % -2.0% % -1.2% % 3.7% % 7.0% % 7.4% % -1.0% % -7.2% % -9.9% % -3.6% % -11.2% 2000K ONLY (2K4K) Rf: 84.3 Rg: K ONLY (2K4K) Rf: 89.6 Rg: % 1.7% % 7.8% % 10.0% % 5.1% % 1.7% % -0.3% % -5.9% % -0.2% % 4.6% % 9.3% % 9.7% % 3.3% % -12.8% % -19.0% % -12.9% % -10.6% % 1.0% % 0.5% % 1.1% % -1.1% % 0.0% % 1.3% % 2.6% % 4.6% % 9.1% % 9.5% % 9.0% % 1.7% % -4.3% % -2.1% % -4.3% % -6.1% 2K4K (3000K) Rf: 90.2 Rg: % 1.3% % 3.3% % 5.1% % 0.7% % 1.7% % -0.6% % -0.4% % -1.1% % 3.6% % 7.0% % 7.8% % -0.3% % -6.3% % -9.1% % -3.1% % -11.2% 6