Stainless Steel. Mortice Locks

Size: px

Start display at page:

Download "Stainless Steel. Mortice Locks"

Suzan Mosley
5 years ago
Views:

1 Stainless Steel Mortice Locks

2 STOP PRESS... Free door hardware scheduling and key scheduling are now available from Australian Lock Company specialists. Refer to your local Sales Representative or Customer Service Officer at Australian Lock Company. P 2

3 Table of Contents troduction Mortice Locks Standards SCEC Security Rating Quick Reference Guide How to Order Series Mortice Nightlatches Series Mortice Dead Locks Series Mortice Vestibule & Privacy Locks Series Mortice Sliding Door Locks Series Mortice Passage Locks Rebate Kits, Strike & Face Plates Dust Covers, Cams, Snib Adaptors, Hold Back Chart Miscellaneous Items Australian Lock Company Guarantee Australian Lock Company Pty Limited guarantees its products against faulty workmanship and materials. Any Australian Lock Company product found to be defective within its normal worklife will be replaced free of charge by the same or equivalent product. Electrical components used in our products come with a guarantee for up to five years from date of manufacture. Under this guarantee, Australian Lock Company however, assumes no liability for any of the following: 1. Failure to follow fitting instructions/improper installation. 2. Wear and tear due to improper maintenance. 3. direct or consequential loss or damage. 4. Removal and/or replacement cost. 5. Freight /travel /travel time cost. 6. Unauthorised modification or repair to a supplied product. 7. Use of unauthorised replacement parts. 8. Product failure caused by the use of non-australian Lock Company part/s. Nothing in the Australian Lock Company guarantee excludes, restricts or modifies any condition, warranty, right or liability implied or protected by law where to do so would render the Guarantee, or any part of it, void. P 1

4 ALCOM 5000 Series Mortice Locks The state-of-the-art range of Alcom 5000 series stainless steel mortice locks are designed and engineered at the Australian Lock Company to ensure that the high quality expected from Australia s Award winning manufacturer of BiLock high security locking systems is maintained. The Australian Government s Security Construction and Equipment Committee (SCEC) has endorsed the Alcom 5000 and Alcom 5100 stainless steel mortice lock and deadlock series, respectively to truder Resistant and Secure Area status - the highest rating by the Australian Government for security related products. We are proud to announce that, in addition to both SCEC and the fire rating, the lock was also approved by an independent NATA accredited body to Australian Standards AS level D3 durability and level S3 physical security with K2 cylinder fitted. The product now joins the ranks of this country s most highly secured and accredited locking mechanisms. The Alcom 5000 series is ideally suited to any building where durability or security are considered paramount, offering a complete extensive range of functions to meet individual or project specific requirements. keeping with the ingenuity that is synonymous with Australian Lock Company product lines, Alcom 5000 series stainless steel mortice lock: - Allows you the flexibility to change the handing of the lock without removal of the lock case lid by simple rotation of the latch bolt for inwards or outwards opening, and from left hand to right hand without case disassembly. - Offers a multi-functional case allowing you easy conversion of a vestibule lock function to a combination lock function by simply turning the handing pieces on the side of the lock. - Body & case lid made from 2mm grade 304 stainless steel. - Auxiliary dead latching bolt of sintered stainless steel. - Main latch bolt of 304 grade sintered stainless steel. - Main deadbolts and sliding door bolts of 304 grade sintered stainless steel. - All springs are manufactured from stainless steel. 1. Auxiliary Dead Latching Bolt The auxiliary dead latching latch bolt is made of sintered stainless steel and retracts with the main latch bolt. When the door is in the closed position the main latch bolt is extended into the strike plate, while the auxiliary dead latching latch bolt remains retracted as it automatically activates the dead latching function. This prevents the main latch bolt from being manipulated from applied end pressure against the latch bolt. 2. Latch bolt and deadbolts Manufactured from 304 grade sintered stainless steel, the main latching bolt has a 15 mm protrusion. To reverse the bolt, simply remove the face plate and rotate 180 degrees clockwise prior to installation of the face plate. The deadbolt has a protrusion of 18 mm manufactured from 304 grade sintered stainless steel. 3. Cylinder The Alcom 5000 series stainless steel mortice lock range has been designed to be used in conjunction with the Australian standard oval cylinder configuration and its universal fixing. It is held in place by a threaded cylinder retaining screw as standard. When applicable all Alcom 5000 series stainless steel locks come with the Australian Lock Company s six-pin in-line cylinders as standard. P 2

5 4. Lock Case and Cover The lock case and cover are of stainless steel grade 304 and 2mm thick. Along with the mounting plate, this forms an integral part of the lock to achieve optimal strength. The face plate is also 2mm thick stainless steel, grade 304, and comes in a satin finish. Brass face plates can be supplied for all soft finishes. 5. Backset The standard backset for all Alcom 5000 series stainless steel mortice locks is 60mm. An optional 127mm backset can be made to order and priced upon request. 6. Springs All springs are also manufactured from stainless steel. 7. Strike Plate For all latching locks and latches, the Australian universal strike plate is supplied in 2mm thickness, stainless steel grade 304, and satin finish, and suitable for up to four hour fire rated door assemblies. Brass universal strike plates can be supplied for all soft finishes. 8. Kick Off feature Available to all applicable lock type functions. (e.g. patio and privacy functions) When ordering, please add the suffix KO to the lock function description if this is required. 9. Holdback Available in most lock functions to allow latch bolt to be held in retracted position. When ordering, please add the suffix HB to the lock function description if this is required. 10. Door Thickness All Alcom 5000 series stainless steel locks suit 33mm - 50mm thick Doors as standard. 11. Door Clearance To ensure correct functioning and security for the dead latching feature of this lock, the door clearance should be at least 3mm. Alcom 5000 series dead latching locks can, however, still operate at a gap of up to 6.5mm. 12. Fire Doors The Alcom 5000 series lock has been successfully tested to Australian Standard AS1530. Our lock complies with Australian Standards AS1905 Part 1 fire resistant door sets and will suit four hour fire doors. 13. Rebate Kits Rebate kits are available to convert the standard mortice lock into a 13mm rebated door. When ordering, please add an RK to the lock function description if this is required. Application The Alcom 5000 series has a broad range of applications. However, it is certainly designed to offer enviable quality and strength that can exceed requirements for use on commercial and institutional doors where heavy traffic usage is common. Finishes for cylinders Standard finishes: Satin Chrome - SCP, Chrome Plate - CP, Polished Brass Unlacquered - PBU and Florentine Bronze - FB. Special finishes are Black Chrome Plate BC and Satin Brass Unlacquered SBU. STOP PRESS... Free door hardware scheduling and key scheduling are now available from Australian Lock Company specialists. Refer to your local Sales Representative or Customer Service Officer at Australian Lock Company. P 3

S TA I N L E S S S T E E L M O RTICE LO C K S S TA N DA R D S Fire Rating Your confidence will be reinforced with the knowledge that Alcom mortice 5000 has been

4 2005 for Pyropanel door sets & Australian Standards AS1530.4 2005 for E-core door sets).

part 1, Fire Resistant Door Sets). Please refer to the fire symbol throughout hout this Catalogue for fire door application mortice door furniture.

6 S TA I N L E S S S T E E L M O RTICE LO C K S S TA N DA R D S Fire Rating Your confidence will be reinforced with the knowledge that Alcom mortice 5000 has been successfully tested for endurance within fire door assemblies for up to four hours (in accordance with both Australian Standards AS for Pyropanel door sets & Australian Standards AS for E-core door sets). The lockset remained latched at the conclusion of the four hour test, indicating that Alcom Mortice 5000 is suitable for use on all fire doors (as referred to in AS1905, part 1, Fire Resistant Door Sets). Please refer to the fire symbol throughout hout this Catalogue for fire door application mortice door furniture. Rating BUILT TO AUSTRALIAN STANDARDS The ALCOM stainless steel Mortice Locks Series have been engineered to conform to Australian Standard AS , level D3 durability and level S2 physical security. Level S3 physical security is available as an optional extra and if required must be requested at the time of ordering. P 4

7 SCEC Security Rating P 5

8 Vestibule Lock Deadlock Nightlatch Quick Reference Chart PWD 5210 P 6

9 Sliding Door Combination P 7

10 How To Order Code *Extended mortice locks are available upon request. Please contact your sales representative or our sales department at P 8

11 How To Order Code Nominate the correct backset as required (e.g. 5 = 60mm Backset) Select the correct lock function (e.g. 2 = Vestibule) Select sub function Select the correct locking requirements (e.g. 00 = Cylinder & Turnsnib) Specify handing of Lock This is to determine the hand of the lock (e.g. RH = Right Hand) Specify finish (e.g. SSS = Satin Stainless Steel) Cylinders (e.g. NC = No Cylinder, Leave blank if you require cylinder/s) Options To select additional options such as: (e.g. RK = Rebate Kit, HB = Hold Back, KO = Kick Off) Note: When mortice locks are being ordered with cylinders: satin stainless steel mortice locks will be supplied with satin chrome plate cylinders polished stainless steel mortice locks will be supplied with chrome plate cylinders. Door Handing Australia doors are handed in accordance with English practice and the direction of opening is always viewed from the OUTSIDE. The closing face of the door is the one closing against the stop bead. Which side of the door is the outside? the outside of an exterior door is the street side or entry side the outside of a room door is the corridor side the outside of a cupboard or closet door is the room, corridor or hall side the outside of a single communicating door is the side from which the butt hinge are invisible when the door is closed. The outside of double communicating door is the space between the two doors. A Right Hand Sliding Door is one which closes to the right and has the lock on the right hand edge, viewed always from the outside. Patio or Privacy locks are used on either patio or toilet doors. Operation to lock or unlock handles are either turnsnibs or outside emergency release. Open-out doors Open- doors Right hand open out Left hand open out side of doors Right hand open in Left hand open in side of doors P 9

12 S E R I E S M O RTICE N I G H T L ATC H E S Series Mortice Nightlatches Deadlocking mortice Nightlatches feature a Latchbolt that is retracted by a series of cylinder or turnsnib configurations. Latchbolt is automatically locked when the door is closed P 10

13 S E R I E S M O RTICE N I G H T L ATC H E S Cat No: 5000 Nightlatch Cylinder & Turnsnib Opened by key from outside. Opened by turnsnib from inside. Latchbolt automatically deadlatches when door is closed Cylinder Nightlatch Single Cylinder Opened by key from outside. Latchbolt automatically deadlatches when door is closed Communicating Door Lock Double Cylinder Opened by key from either side. Latchbolt automatically deadlatches when door is closed Exit Door Latch Turnsnib Opened by turnsnib from inside. Latchbolt automatically deadlatches when door is closed. P 11

14 S E R I E S M O RTICE D E A D LO C K S Series Mortice Deadlocks Deadbolts have a rectangular bolt. Deadbolts are operated by either cylinders or turnsnibs to retract the latchbolt P 12

15 S E R I E S M O RTICE D E A D LO C K S Cat No: 5100 Deadlock Cylinder & Turnsnib Opened by key from outside. Opened by turnsnib from inside Lockup Shop Deadlock Single Cylinder Opened by key from outside Glass Door Deadbolt Double Cylinder Opened by key from either side Exit Deadbolt Turnsnib Opened by turnsnib from inside. P 13

16 S E R I E S M O RTICE V E S T I BU L E LO C K S Series Mortice Vestibule & Privacy Locks The vestibule locks are fully reversible and the function can be changed without removing the case. Auxiliary deadlatch bolt automatically locks main bolt on closing the door. The vestibule locks always feature an inside handle to allow egress in case of emergencies P 14

17 S E R I E S M O RTICE V E S T I BU L E LO C K S Cat No: 5200 Vestibule or Entrance Lock Cylinder & Turnsnib Latchbolt operated by handle from either side. side handle is locked or unlocked by inside turnsnib. Key outside retracts latchbolt only. side handles are always free. Latchbolt automatically deadlatches when door is closed Class Room Lock Single Cylinder Latchbolt operated by handle from either side. side handle is locked or unlocked by key from outside. side handles are always free. Latchbolt automatically deadlatches when door is closed Exterior or Exit Door Lock Double Cylinder Latchbolt operated by handle from either side. side handle is locked or unlocked by key from inside. Key outside retracts latchbolt only. side handles are always free. Latchbolt automatically deadlatches when door is closed Exit Door Latch Turnsnib Latchbolt operated by handle from either side. side handle is locked by turnsnib inside. side handles are always free. Latchbolt automatically deadlatches when door is closed. P 15

18 S E R I E S M O RTICE V E S T I BU L E LO C K S Series Mortice Vestibule & Privacy Locks Vestibule locks are fully reversible and the function can be changed without removing the case. Auxiliary deadlatch bolt automatically locks main bolt on closing the door. The vestibule locks always feature an inside handle to allow egress in case of emergencies PWD 5210 P 16

19 S E R I E S M O RTICE V E S T I BU L E LO C K S (continued) Cat No: 5204 Storeroom Lock Single Cylinder Key outside retracts latchbolt only. side handle is ridged at all times. side handles are always free. Latchbolt automatically deadlatches when door is closed Office Lock Cylinder & Turnsnib Latchbolt operated by handle from either side. side handle is locked or unlocked by either key from outside or turnsnib inside. side handles are always free. Latchbolt automatically deadlatches when door is closed Exit Door Lock Single Cylinder Latchbolt operated by handle from either side. side handle is locked or unlocked by inside cylinder. Latchbolt automatically deadlatches when door is closed Exit Door Latch Latchbolt operated by handle from inside only. No outside handle. Latchbolt automatically deadlatches when door is closed. 5208PWD Special Classroom Lock Single Cylinder Latchbolt operated by handles either side except when outside handle is made inoperable by the key from outside. Cylinder has dual function. When turned towards strike, cylinder unlocks outside handle. If turned further, cylinder will also retract Latchbolt. side handles are always free Privacy Lock Latchbolt operated by handles either side. side handle is locked. side handles are always free. Has Kick Off function. P 17

20 S E R I E S M O RTICE S L I D I N G D O O R LO C K S Series Mortice Sliding Door Locks Sliding door locks are operated by either cylinder or turnsnib configuration. The deadbolt has a claw bolt that engages behind the strike plate to prevent the bolt being withdrawn while sliding the door P 18

21 S E R I E S M O RTICE S L I D I N G D O O R LO C K S Cat No: 5300 Sliding Door Deadlock Cylinder & Turnsnib Opened by key from outside. Opened by turnsnib from inside Lock Up Shop Sliding Deadlock Single Cylinder Opened by key from outside Sliding Glass Door Deadlock Double Cylinder Opened by key from either side Exit Sliding Door Deadlock Turnsnib Opened by turnsnib from inside. P 19

22 S E R I E S M O RTICE C O M B I NAT I O N LO C K S Series Mortice Combination Locks Combination locks are fully reversible and the function can be changed without removing the case. Auxiliary deadlatch bolt automatically locks main bolt on closing the door. Combination locks feature is the inside handle is always fixed when locked by the cylinder or snib P 20

23 S E R I E S M O RTICE C O M B I NAT I O N LO C K S Cat No: 5400 Combination Entrance Lock Cylinder & Turnsnib Latchbolt operated by handles from either side. Both handles are locked or unlocked by either key outside or turnsnib inside. Latchbolt automatically deadlatches when door is closed Entrance Door Lock Single Cylinder Latchbolt operated by handles from either side. Both handles are locked or unlocked by key from outside. Latchbolt automatically deadlatches when door is closed Glass Door Lock Double Cylinder Latchbolt operated by handles from either side. Both handles are locked or unlocked by key from outside or key from inside. Latchbolt automatically deadlatches when door is closed Patio Door Lock Turnsnib side Latchbolt operated by handle from either side. Both handles are locked or unlocked by turnsnib from the inside. Latchbolt automatically deadlatches when door is closed. P 21

24 S E R I E S M O RTICE C O M B I NAT I O N LO C K S Series Mortice Combination Locks Combination locks are fully reversible and the function can be changed without removing the case. Auxiliary deadlatch bolt automatically locks main bolt on closing the door. Combination locks feature is the inside handle is always fixed when locked by the cylinder or snib P 22

25 S E R I E S M O RTICE C O M B I NAT I O N LO C K S Cat No: 5405 Entrance Office Lock Cylinder & Turnsnib Latchbolt operated by handles from either side. Both handles are locked or unlocked by turnsnib from inside. Key outside retracts latchbolt. Latchbolt automatically deadlatches when door is closed. (continued) 5409 Passage Latch Non Locking Opens by handles either side at all times Glass Door Lock Double Cylinder Latchbolt operated by handles from either side. Both handles are locked or unlocked by key from inside. Key outside retracts latchbolt. Latchbolt automatically deadlatches when door is closed. P 23

26 AU X I L I A RY PA RTS Rebate Kits Strike Plates Latchbolt Rebate Kit MLRK Finishes available SSS, PBU, CP & FB Deadbolt Rebate Kit MLRK Finishes available SSS, PBU, CP & FB Universal Strike Plate MLPA Finishes available SSS, PBU, PSS & FB 16 Deadbolt/Sliding Lock Strike MLPA Finishes available SSS, PBU, PSS & FB Face Plates Face Plate MLPA Finishes available SSS, PBU, PSS & FB Face Plate MLPA Finishes available SSS, PBU, PSS & FB P 24

27 KEY Required Select L/H or R/H.. Optional Cams K2 Cam MLCMK2 W2 Cam MLCMW2 X2 Cam MLCMX2 XB2 Cam MLCMXB2 BiLock Y2 Cam MLCMY2 Z2 Cam MLCM Z2 Snib Adaptors MLAAD LH MLAAD RH MLAAD MLAAD MLAAD RH MLAAD LH Dust Covers MLCA MLCA Hold Back Hold Back RH Hold Back LH P 25

28 KEY Required Select L/H or R/H.. Optional PWD Cams K2 Cam MLCMK2 W2 Cam MLCMW2 X2 Cam MLCMX2 XB2 Cam MLCMXB2 BiLock Y2 Cam MLCMY2 Z2 Cam MLCM Z2 Snib Adaptors MLAAD LH MLAAD RH MLAAD MLAAD MLAAD RH MLAAD LH Dust Covers MLCA MLCA Hold Back Hold Back RH Hold Back LH P 26

29 M I S C E L L A N E O U S I T E M S Furniture Spindle MLMS Cylinder Retaining Screw MLSC Strike Box MLMS Standard Oval Cylinder 6 Pin..... APC4570-K2 Available Finishes: CP, SCP, PBU & FB Standard Cylinder Escutcheon... APMS Standard Turn Snib APMS Face Plate Screws MLSC Hold-Back Cylinder LH APC4570HBLH-K2 Hold-Back Cylinder RH APC4570HBRH-K2 Available Finishes: CP, SCP, PBU & FB Hold-Back Cam LH MLKIT570HBLH Hold-Back Cam RH MLKIT570HBRH x M2.5 x 0.45 HOLES 9 Standard Oval Cylinder 6 Pin APC4570-K2 Hold Back (HB) Hold Back (HB) Hold back (HB) allows the latchbolt to be held in the opened position and the key removed. This option is available on certain locks listed below. If hold back is requested, a cylinder and with hold back cam will be supplied. Available on 5000, 5001, 5002, 5202, 5204, 5405 and Hold-Back (Left Hand) MLKIT570HBLH Hold-Back (Right Hand) MLKIT570HBRH Hold-Back (Right Hand) APC4570HBRH-K2 (cludes cam, retainer plate & screws) Kick off (KO) Kick off (KO) Kick off (KO) function adds a feature to the lock that makes it unable to be locked when the door is in the opened position. Kick off is available on any lock that incorporates an MLAAD Turnsnib adaptor AND a W cam. Available on 5200, 5203, 5205, 5400 and Kick-off Snib Adaptor Assembly (Right Hand) MLAAD RH Kick-off Snib Adaptor Assembly (Left Hand) MLAAD LH K2 Cam MLCMK2 P 27

30 Contact Australian Lock Company Pty Ltd 17 Doyle Avenue Unanderra NSW 2526 Australia PO Box 479 Unanderra NSW 2526 Australia Telephone: 61 (0) Facsimile: 61 (0) Web: Whilst the Australian Lock Company Pty Ltd has taken every effort to ensure that the information in this catalogue is accurate at the time of publication, we recommend that you consult your Sales Representative to ascertain information in specific products and specifications prior to placing your order. Please note that we reserve the right to make changes without notice. The Australian Lock Company Pty Ltd will not be liable for any damage or loss arising from any errors or omissions in the information contained in this catalogue or arising from the use of the information contained herein. Brochure 109 Rev.4

mortice lock Product Catalogue

mortice lock Product Catalogue www.australianlock.com.au 1 Contents Alco 5000 Series Mortice Locks troduction 2 Quick Reference Chart 3 5000 Series Mortice Nightlatches 4 5100 Series Mortice Deadlocks