Pneumatics. NAILERS D51825 Heavy-Duty 31 Clipped Head Framing Nailer, 2" 3-1/2" (.113 to.131) Nail Capacity

Transcription

1

2 D51238K Heavy-Duty 18 Gauge 2" Brad Nailer Kit NAILERS D51825 Heavy-Duty 31 Clipped Head Framing Nailer, 2" 3-1/2" (.113 to.131) Nail Capacity Tool-free indexed depth setting is lockable and repeatable Top and side low nail indicator windows allow the user to quickly and easily see when it is time to reload Overmolded no-mar pad allows greater visibilty and durability Tool-free reversible belt hook allows user to place tool on belt when not in use Nail Diameter 18 gauge Nail Length Capacity 5/8" 2" Magazine Angle Straight Magazine Capacity 110 nails Magazine Loading Side load Operating Pressure psi Depth Setting Tool-free indexed No Mar Pad Low profile overmolded Integrated Belt Hook Tool-free reversible Jam Clearing Tool-free Includes: DEWALT safety glasses, 1 oz. bottle of DEWALT Pneumatic Tool Oil, allen wrenches, replacement sequential trigger and heavy-duty kit box D51275K Heavy-Duty 15 Gauge 1-1/4" 2-1/2" Angled Finish Nailer Kit Optimized power design, generates power for the toughest applications and delivers less air consumption Tool-free adjustable depth allows for quick and easy depth of drive setting Driver piston catch allows for a consistent drive each time Nail Style Clipped Head Magazine Angle 31 Nail Length Capacity 2" to 3-1/2" Nail Diameter Range.113" to.131" Magazine Capacity 80 nails Engine Valve Type Drop-sleeve Jam Clearing Yes Dry Fire Lockout Yes Integrated Rafter Hook Yes, Adjustable Depth Setting Yes,Tool-free 100 psi 680 in/lbs Tool Length 19" Tool Height 14-1/4" Tool Weight 8.1 lbs Shipping Weight 11 lb D51850 Heavy-Duty 20 Full Round Head Framing Nailer, 2" 3-1/2" (51mm 89mm) (.113 to.148) Nail Capacity Tool-free indexed depth setting is lockable and repeatable Lightweight magnesium housing delivers a 3.85 lb. unit for less user fatigue Tool-free reversible belt hook allows user to place tool on belt when not in use Tool-free jam clearing eliminates down-time from bent nails caught in the nosepiece Nail Diameter 15 gauge Nail Length Capacity 1-1/4" 2-1/2" Magazine Angle 34 Magazine Capacity 110 nails Magazine Loading Rear load, dual load Operating Pressure psi Depth Setting Tool-free indexed No Mar Pad Low profile overmolded Integrated Belt Hook Tool-free reversible Jam Clearing Tool-free Includes: DEWALT safety glasses, 1 oz. bottle of DEWALT Pneumatic Tool Oil, 2 allen wrenches, replacement sequential trigger and heavy-duty kit box Optimized power design, generates power for the toughest applications and delivers less air consumption Unique engine design generates power to bury nails in both standard framing lumber and engineered lumber with minimal recoil Tool-free adjustable depth allows for quick and easy depth of drive setting Nail Style Full Round Head Magazine Angle 20 to 22 Nail Length Capacity 2" to 3-1/2" Nail Diameter Range.113" to.148" Magazine Capacity 65 nails Engine Valve Type Drop-sleeve Jam Clearing Requires 5mm or 3/16 allen key Dry Fire Lockout Yes Integrated Rafter Hook Adjustable 360 Depth Setting Tool-free 100 psi 680 in/lbs Tool Length 21-1/4" Tool Height 14-1/4" Tool Weight 8.2 lbs Shipping Weight 11 lbs 127

3 Industrial Wide Crown Roofing Stapler 1" Crown Features and Benefits Lightweight, durable aluminum frame Patented jam-free magazine Power control valve adjusts power by 30% Moled rubber comfort grip lasts life of tool Reduced height for stapling in tight areas Adjustable depth control prevents over penetration of staple Rear exhaust conveniently directs exhaust away from user and work surface Industrial Jam-Free Construction Stapler 7/16" Crown Part No. 450S2-2 Features and Benefits Increased power for better driving of staples into hardwood applications Exclusive jam-free magazine Molded rubber comfort grip lasts life of tool Longer, narrower nose for increased visibility and ease in stapling corner blocks Solid steel, multi-directional exhaust cap Adjustable trip provides positive staple depth control Part No. 650S5-1 STAPLERS, NAILERS Industrial 15-Gauge Oil-Free Angled Finish Nailer Kit Features and Benefits Lightweight magnesium design for added durability Oil-free operation requires no regular maintenance and eliminates the risk of oil stains Adjustable depth guide sets nails to desired depths quickly and conveniently Tool-free removable magazine for fast cleaning and jam clearing Kit includes: Finish Nailer, 1,000 1" Nails, Carrying Case, Hex Wrenches and Four Profile Tips Shoots 1-1/4" to 2-1/2" Nails Part No. N62FNK-2 Kit Industrial Coil Siding Nailer Features and Benefits Drives wire weld and plastic inserted coil nails Adjustable depth guide sets nails to desired depths quickly and conveniently Lightweight aluminum design for added durability Soft rubber foot prevents damage to softer woods Tool-free adjustable exhaust conveniently directs exhaust away from the user Shoots 1-1/4" to 2-1/2" Nails Part No. N66C-1 28 Industrial Framing Nailer System Features and Benefits Patented push button adjustable depth guide sets nail to desired depths quickly and conveniently Includes factory installed sequential trigger and exclusive Smart Trigger Notched 16" layout indicator on magazine helps achieve correct distance between studs in a matter of seconds Lightweight magnesium design for added durability 21 Plastic Collated Framing Nailer Part No. F28WW Features and Benefits Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications Includes factory installed sequential trigger and exclusive Smart Trigger Patented push button adjustable depth guide sets nails to desired depths Lightweight magnesium design for added durability Drives plastic collated 1-1/2" and 2-1/2" metal connector nails (.131".148" diameter) Part No. F21PL Industrial Flooring Stapler Features and Benefits Aluminum housing for job site durability High-speed, mallet-actuated pneumatic operation increases productivity over manually-operated tools Precisely drives staples at proper angle and depth Extra wide composite base plate for added stability Long reach handle for increased comfort and added control (short handle optional) Composite base plates included for the installation of both 1/2" and 3/4" hardwood flooring Mallet included Part No. MIIIFS Industrial Coil Framing Nailer Features and Benefits Aluminum housing for site durability Coil magazine holds up to 300 nails for high production applications Quick-open composite canister survives falls Rubber grip for comfort Adjustable depth control for flush nailing Aggressive toe-nailing teeth grip lumber for slipfree toe-nailing Adjustable deflector conveniently directs exhaust N80CB-1 Contact Trip N80CB-2 Sequential Trip Part No. N80CB Industrial Coil Roofing Nailer Features and Benefits Zero nail lockout feature eliminates dry firing and indicates when to reload the magazine Nosepiece features carbide inserts for long-life performance Aggressive wear guards and skid pads protect the tool from damage on abrasive surfaces Quick-set adjustable depth guide sets nails to desire depths quickly and conveniently Patented, single-action, side load canister for fast, one-step nail loading Adjustable shingle guide for quick shingle spacing Shoots 3/4" to 1-3/4" Nails Part No. RN46-1

4 Finish Nailers FinishPro 41XP 15 Gauge Brads Two-year warranty Adjustable depth-of-drive NeverLube technology No lubrication required Easy-clear latch To clear jams fast No-mar pads with onboard storage to protect work materials TOOL SPECIFICATIONS Height: 11.6"(249 mm) Length: 13"(330 mm) Weight: 4 lb( 3.6 kg) Reg. Operating Pressure: psig ( bar) Mode of Operation: Contact or Sequential Actuation Part No. SFN42XP The FinishPro 25 drives both slight and medium headed 18-Gauge brads from 5/8" to 2-1/8" into the hardest woods. The on-tool power adjustment allows the user to increase power by 30%. All this, plus SENCO s exclusive Never-Lube design to keep your work surface oil free. TOOL SPECIFICATIONS Height: 9.9" ( mm) Length: 10.0" (254 mm) Weight: 2.7 lb (1.227 kg) Width: 2.2" Fastener Capacity: 110 Reg. Operating Pressure: psig ( bar) Collation: Glue Mode of Operation: Restrictive Trigger Only Part No. FP25XP Framing Nailers Full Round-Head, Plastic Strip Collation 2" to 3-1/4" x Lightweight and well balanced with steel magazine Built-in toenail push lever Open nose for ease of clearing jams Full Round Head, Coil Wire Collation 2" to 3-1/4" x.099/.113/.120/.131 Built-in toenail push lever Drive depth adjustment for siding applications Open nose for ease of clearing jams Plastic shield to deflect wire collation PNEUMATIC SPECIFICATIONS Operating air pressure: psi Nail capacity: Air inlet: 3/8" L x W x H: 22" x 4-3/32" x 13-3/8" Weight: 7.9 lbs Air consumption (ft psi):.088 Part No. NR83A2S PNEUMATIC SPECIFICATIONS Operating air pressure: psi Nail capacity: Air inlet: 3/8" L x W x H: 11-11/32" x 5-13/32" x 13-11/16" Weight: 7.7 lbs Air consumption (ft psi):.088 Part No. NV83A2 Single Trip Trigger Mechanism Part No

5 20-22 STRIP FRAMING NAILS Full Round Head Plastic Collated HITACHI NR83A BOSTITCH F21PL Also ATRO HELEN 90S/RHS 900, AIRY ABL-8290, BERRYFAST 3000/3500/4100/4500, BOSTITCH N90RHN/N95RHN/F21PL/N88RH-2MCN/N88RH, DEPOAN 6C50/RN2290, DEWALT D51845/D51844, DUOFAST CN350/SNP 83/CN350SH/CN137, EASYFAST SRN90/SRN83, FASCO F5CRHN20-83/F6RHN20-90, GREX SF9021, HALSTED HNS 24/32/34/NH-212, HAUBOLD RN90, HILTI RHN 9020, HITACHI NR83A/A2/S/NR90AC2, ISM 921/933/928, HOLZER 3546/3544/3540/3542/3547, JEMERCO JTNFH-90/JTNFC-90, MAKITA AN8300/AN922, MAX SN90/SN890RH/SN70/SN80, PASLODE 5350SN, PORTER CABLE FR350/A/FR350MAG, RIDGID R350RHA, SEARS 18365/18465, SENCO SN60/FP 602FRH/FP702XPFRH/FP 752XP FRH/FP602, FP502-FRH SPOTNAIL YPR90/NPR90, STAN-TECH SDN11, UNICATCH UNS350PL, ZNEX FM-90 Hitachi Qty./ Part No. Fastener Description Exchange Box Bright Strip Nails RHH6D 2" x.113 Bright Smooth Plastic M RHH6DR 2" x.113 Bright Ring Plastic 6M RHH8D 2-3/8" x.113 Bright Smooth M RHH8DR 2-3/8" x.113 Bright Ring M RHH10D 3" x.131 Bright Smooth M RHH12D 3-1/4" x.131 Bright Smooth M RHH12DS 3-1/4" x.131 Bright Screw 4M RHH16D 3-1/2" x.131 Bright Smooth M Hot Galvanized RHH6DRHD 2" x.113 Hot Dip Ring 6M RHH8DHD 2-3/8" x.113 Hot Dip Smooth M RHH8DRHD 2-3/8" x.113 Hot Dip Ring M RHH12DHD 3-1/4" x.113 Hot Galvanized M RHH12DXHDSI 3-1/4" x.120 Hot Galvanized Screw 4M RHH16DHD 3-1/4" x.113 Hot Galvanized M 130

6 28 STRIP FRAMING NAILS Clipped Head Wire Collated BOSTITCH N80S CAMPBELL HAUSFELD NS2890 Also ATRO CHS900/HELEN 90 CH, BOSTITCH N8/N16/N70S/N80(S)(SB-1)/N80/N100S/F28WW/ N88WWB-1, CAMPBELL HAUSFIELD NS28900, DUOFAST CN325, FASCO F5CHHN28-83/F6HHN28-90, SN890CH/28, PORTER CABLE FM350A. STAN TECH SDN11PT, ISM 928 POWER PRO Bostitch Qty./ Part No. Fastener Description Exchange Ctn. Bright Strip Nails CHB6DW 2" x.113 Bright Smooth Wire Col S6D 2M CHB6DRW 2" x.113 Bright Ring Wire Col S6DR113 2M CHB8DW 2-3/8" x.113 Bright Smooth Wire S8D 2M CHB8DRW 2-3/8" x.113 Bright Ring Wire Col S8DR 2M CHB10DW 3" x.131 Bright Smooth S10D 2M CHB10DXW 3" x.120 Bright Smooth 2M CHB12DW 3-1/4" x.131 Bright Smooth S12D 2M CHB16DW 3-1/2" x.131 Bright Smooth S16D131 2M Hot Galvanized CHB6DHDW 2" x.113 Hot Galvanized Smooth S6DGAL 2M CHB6DRHDW 2" x.113 Hot Galvanized Ring S6DRGAL 2M CHB8DHDW 2-3/8" x.113 Hot Galvanized Smooth S8DGAL 2M CHB8DRHDW 2-3/8" x.113 Hot Galvanized Ring S8DRGAL 2M CHB12DHDW 3-1/4" x.131 Hot Galvanized Smooth S12DGAL 2M CHB16DHDW 3-1/2" x.131 Hot Galvanized Smooth S16D131GAL 2M Call us for all your Air Tool Needs. 131

7 31 33 STRIP FRAMING NAILS Clipped Head Paper Tape Collated Also ATRO CHS933, BOSTITCH F33PT/N90PT, DEPOAN DPN-6C52, DEWALT D51823/D51822, FASCO F5C HHN31-83/F6 HHN31-90, HILTI CHN 90-33, HITACHI NR83AA/NR90AD, MAKITA AN942, MAX SN890CH/34, PASLODE 5300/5325/5350/5350SN/F350S/GN212/IMPUSE 300/325/350/SK312, PORTER CABLE FC350A, RIDGID R350CHA, SEARS 18420, SENCO SN2/SN2+/SN3/SN325/SN4/SN70/FP601/FP651/FP701XP/FP751XP/FP700E/FP600E, SPOTNAIL YTD90, STAN TECH SDN11PT1 Paslode Qty./ Part No. Fastener Description Exchange Box Bright Strip Nails CHP6D 2" x.113 Bright Smooth M CHP5DR 2" x.113 Bright Ring M CHP8D 2-3/8" x.113 Bright Smooth M CHP8DR 2-3/8" x.113 Bright Ring M CHP10D 3" x.131 Bright Smooth M CHP12D 3-1/4" x.131 Bright Smooth M CHP16D 3-1/2 x.131 Bright Smooth M Hot Galvanized CHP6DHD 2" x.113 Hot Gal Smooth M CHP 6DRHD 2" x.113 Hot Gal Ring M CHP8DHD 2-3/8" x.113 Hot Galv Smooth M CHP8DHDR 2-3/8" x.113 Hot Galv Ring M CHP12DHD 3-1/4".131 Hot Galv Smooth M CHP16DHD 3-1/2" x.131 Hot Gal Smooth 2.5M Stainless Steel CHP8DRSS 2-3/8" x.113 Stainless Ring 1M CHP12DRSS 3-1/4" x.131 Stainless Ring 1M 132

8 NAILS Coil Roofing Nails BOSTITCH RN45B-1 HITACHI NV45AB Also ATRO CN134/ROOFING ROLL, BEA SN-500, DEPOAN DPN-6D2, FASCO F3C CN15W-32 ROOF/F4 CN15W-45 ROOF, HILTI RN1344 RFC134B, HITACHI NV45AB, MAKITA AN451, MAX CN450R, PORTER CABLE RN175 PASLODE 3175R, SEARS 18444, SENCO SCN200R SCN40R, SPOTNAIL CRN114, STAN-TECH N 134/SDCN10, AND BOSTITCH N12B-1 RN45B-1 Bostitch Qty./ Wt. Part No. Fastener Description Exchange Ctn. Ctn. *CRN100 1" x.120 Electro-Galv. CR2DGAL 7.2M 28 *CRN /4" x.120 Electro-Galv. CR3DGAL 7.2M 36 *CRN /2" x.120 Electro-Galv. CR4DGAL 7.2M 40 *CRN /4" x.120 Electro-Galv. CR5DGAL 7.2M Cases per skid. 15 Framing Coil Nails BOSTITCH N80C HITACHI NV83A Also ATRO ROLL85/900 RHC 700, BEA 701DC, BOSTITCH N70C/N86C/N80CB/N100C, FASCO F5 CN15W-65 FASCO F5C CN15W-75/F6 CN15W-90, DEPOAN DPN-6D1 D9N6CD2, HILTI RC314B, HITACHI NV83A NV65AC NV65AD, ISM RHC100 RHC900 ROLL85, MAX CN80F CN70, PASLODE 4275/CN /CN80 SENCO SCN300, SCN60, SCN65, STAN TECH SDCN14B1 SDCN14B2 TACHIKAWA TN-650. Hitachi Qty./ Part No. Fastener Description Exchange Ctn. Bright Coil Nails CN6DR 2" x.099 Bright Ring M CN6DXS 2" x.099 Bright Screw 9M CN7DXS 2-1/4" x.099 Bright Screw 9M CN8D 2-3/8" x.113 Bright Smooth M CN8DR 2-3/8" x.113 Bright Ring M CN10D 3" x.131 Bright Smooth M CN12D 3" x.120 Bright Smooth M Hot Galvanized Nails CN6DXHDR 2" x.099 Hot Galv. Ring M CN8DHD 2-3/8" x.113 Hot Galv. Smooth M CN8DRHD 2-3/8" x.131 Hot Galv. Ring M CN12DHD 3-1/4" x.131 Hot Galv. Smooth M CN12DHDX 3-1/4" x.120 Hot Galv. Smooth 4.5M 133

9 15 DEGREE WIRE COIL SIDING NAILS HITACHI NV65AH MAKITA AN611 Also BOSTITCH N63/65/66/57/64, HITACHI NV65AH/S/NV75AG, MAKITA AN611, MAX CAN55/CN100/CN555/CN565/CN502, SENCO SCN56/SCN55S, SCN200/SCN45, PASLODE 3225/3250-C/HSF *Please Note: See specific manu specs for compatability of wire or plastic collation and capacity of nail sizes Part No. Fastener Description Qty. Collated Hot Dip Galv BMC3DRHD 1-1/4" x.090 Ring Hot Galv 5.4M Wire BMC4DRHD 1-1/2" x.090 Ring Hot Galv 5.4M Wire BMC5DRHD 1-3/4" x.090 Ring Hot Galv 5.4M Wire BMC6DRHD 2" x.090 Ring Hot Galv 5.4M Wire BMC7DRHD 2-1/4" x.090 Ring Hot Galv 5.4M Wire BMC8DRHD 2-1/2" x.090 Ring Hot Galv 5.4M Wire Hot Dip Galv BMC3DRSS 1-1/4" x.090 Ring Stainless Steel 3.6M Wire BMC4DRSS 1-1/2" x.090 Ring Stainless Steel 3.6M Wire BMC5DRSS 1-3/4" x.090 Ring Stainless Steel 3.6M Wire BMC6DRSS 2" x.090 Ring Stainless Steel 3.6M Wire BMC7DRSS 2-1/4" x.090 Ring Stainless Steel 3.6M Wire BMC8DRSS 2-1/2" x.090 Ring Stainless Steel 3.6M Wire 134

10 NAILS 15 Degree Mini Coil Siding Nails Plastic Collated AN611 NV65AH Part No. Fastener Description Qty./Box Collated BCP5DRSS 1-3/4" Stainless Steel 3.6M Plastic BCP6DRSS 2" Stainless Steel 3.6M Plastic BCP7DRSS 2-1/4" Stainless Steel 4.8M Plastic BCP8DRSS 2-3/8" Stainless Steel 4.8M Plastic Star Sales Offers Quality products Value-added service Customer satisfaction Convenient location Customer friendly hours Will-call service Representing over 300 manufacturers Tool repair with factory trained technicians 135

11 FINISHING BRADS 18 Gauge BN200 SB-1850BN Also AIRY ATK-0241 T1 PIN 44, ATRO I-25, BEA S125, BOSTITCH BT31-1B BT13 T29-30 T31 BT50 BT35 SB1850BN SB1842BN, DUOFAST BB-4440 DBN4052S, FASCO F2S GN31 / F22A GN31 / F25A GN40, HAUBOLD SKN 40-V16, HILTI BN-136B, HITACHI NT45A NT50AD NT35AE, ISM TI PIN 44, JET JDPN JDPN , MAX NF211/18-25 NF211/18-50 MAKITA AF501/502/503, PASLODE 2138-F18, PORTER CABLE BN125A BN200/A, REGITAR RET-30, SEARS , SENCO LS2/LS4/LS5, SLP20 A125BN A200BN, SPOTNAILS BC130 HB1825 CB1820, STAN-TECH SDN 18 BR, WOOD TECH , UNITECH A. Fastener Bostitch Qty./ Wt. Part No. Description Exchange Box Ctn. *J-12 1/2" Electro-Galv. Brad 10M 10 *J-16 5/8" Electro-Galv. Brad BT M 10 *J-19 3/4" Electro-Galv. Brad BT M 10 *J-22 7/8" Electro-Galv. Brad 10M 10 *J-25 1" Electro-Galv. Brad BT1309 5M 10 *J /8" Electro-Galv. Brad 5M 10 *J /16" Electro-Galv. Brad BT1314 5M 10 *J /4" Electro-Galv. Brad 5M 10 *J /8" Electro-Galv. Brad 5M 10 *J /2" Electro-Galv. Brad 5M 10 *J /19" Electro-Galv. Brad 5M *J /4" Electro-Galv. Brad BT1345 5M *J-50 2" Electro-Galv. Brad BT1350 5M Master Cartons per skid. New items added daily. If what you require is not listed please contact us. 136

12 FINISH NAILS 16 Gauge HITACHI NT65A PASLODE IM250II FN250A Also ATRO MINOR 600 TIP, BEA SK451, BOSTITCH / T35-40 / T36-35 SB-1664FN, CAMPBELL HAUSFIELD NB00650 NB00500, DEPOAN DPN-6613/6615/6715, DUOFAST LFN 748/764 BFN740, FASCO F3C-FN50 / F3-FN70, HAUBOLD SKN 64-A16 S, SKN-A20 A250SM, HILTI FBN-212N, HITACHI NT65A, HOLZ-HER BC50, MAX NF352-ST/16-50, SEARS 18431, SPOTNAIL HB1640 FB1632, PORTER CABLE FN200 FN250A CBN250, AND PASLODE MU- 112B / 3250-F16 / IM-250, IM252 TRIMPULSE MUSTANG F-16, UNITECH Fastener Paslode Qty./ Wt. Part No. Description Exchange Box Ctn. *N-16 5/8" Electro-Galv. Finish 5M 10 *N-19 3/4" Electro-Galv. Finish M 10 *N-25 1" Electro-Galv. Finish M 10 *N /4" Electro-Galv. Finish M 10 *N /2" Electro-Galv. Finish M 10 *N /4" Electro-Galv. Finish M 10 *N-50 2" Electro-Galv. Finish M 10 *N /4" Electro-Galv. Finish M 10 *N /2" Electro-Galv. Finish M Master Cartons per skid. 137

13 ANGLE FINISH NAILS Angle 15 Gauge HITACHI NT65MA2 SENCO FP42XP Also AIRY ATH0565T, FASCO F4 BA65, DEPOAN DPN-6612, SENCO SFN-1 / SFN-2 / SFN40 / SFN30 / SFN2C A250FN, PORTER CABLE DA250/A, SEARS 18432, CAMPBELL HOUSFIELD NB356500, DUOFAST DAFN-6432, HITACHI NT65AA Fastener Bostitch Qty./ Wt. Part No. Description Exchange Ctn. Ctn. *SAFN114 15G 1-1/4" Bright Finish DA15EPBN 4M 4 *SAFN112 15G 1-1/2" Bright Finish DA17EPBN 4M 4 *SAFN134 15G 1-3/4" Bright Finish DA19EPBN 4M 4 *SAFN2 15G 2" Bright Finish DA21EABN 4M 4 *SAFN214 15G 2-1/4" Bright Finish DA23EPBN 4M 4 *SAFN212 15G 2-1/2" Bright Finish DA25EPB 4M 4 *SAFN114G 15G 1-1/4" Electro-Galv. Finish DA15EABN 4M 4 *SAFN112G 15G 1-1/2" Electro-Galv. Finish DA17EABN 4M 4 *SAFN134G 15G 1-3/4" Electro-Galv. Finish DA19EABN 4M 4 *SAFN2G 15G 2" Electro-Galv. Finish DA21EABN 4M 4 *SAFN214G 15G 2-1/4" Electro-Galv. Finish DA23EABN 4M 4 *SAFN212G 15G 2-1/2" Electro-Galv. Finish DA25EAB 4M 4 64 Master Cartons per skid. Bostitch Angle N62FN2-KIT Also ATRO MONZA 64, DEPOAN DPN-1610, STAN-TECH SDN 15 BR./N60FN-2KIT/N62FNK, MAKITA AF631, UNITECH 1519 Fastener Bostitch Qty./ Wt. Part No. Description Exchange Box Ctn. BAFN114G 15G 1-1/4" Electro-Galv. Finish FN M 4 *BAFN112G 15G 1-1/2" Electro-Galv. Finish FN M 4 BAFN134G 15G 1-3/4" Electro-Galv. Finish FN M 4 *BAFN2G 15G 2" Electro-Galv. Finish FN M 4 BAFN214G 15G 2-1/4" Electro-Galv. Finish FN M 4 *BAFN212G 15G 2-1/2" Electro-Galv. Finish FN M 4 64 Master Cartons per skid. 138

14 3/16" CROWN FINISHING STAPLES BOSTITCH SB-150SX Also BOSTITCH T31-3SX5035/T28-5, SPEEDFAST SN114 BSF SPOTNAILS TEL 3852, AND HILTI SN-114 Fastener Bostitch Qty./ Wt. Part No. Description Exchange Box Ctn. EK-12 3/16" x 1/2" Electro-Galv. Staple SX5035 1/2G 4M 10 EK-16 3/16" x 5/8" Electro-Galv. Staple SX5035 5/8G 4M 10 EK-19 3/16" x 3/4" Electro-Galv. Staple SX5035 3/4G 4M 10 EK-22 3/16" x 7/8" Electro-Galv. Staple SX5035 7/8G 4M 10 EK-25 3/16" x 1" Electro-Galv. Staple SX5035 1G 4M 10 EK-28 3/16" x 1-1/8" Electro-Galv. Staple SX503511/8G 4M 10 EK-32 3/16" x 1-1/4" Electro-Galv. Staple SX G 4M 10 EK-35 3/16" x 1-3/8" Electro-Galv. Staple SX G 4M 10 EK-38 3/16" x 1-1/2" Electro-Galv. Staple 4M Master Cartons per skid. PASLODE 3150-N18 Also PASLODE MU112-N18, AND PASLODE 2118-N18 Fastener Bostitch Qty./ Wt. Part No. Description Exchange Box Ctn. *EF-12 3/16" x 1/2" Electro-Galv. Staple M 5 *EF-16 3/16" x 5/8" Electro-Galv. Staple M 5 *EF-19 3/16" x 3/4" Electro-Galv. Staple M 10 *EF-22 3/16" x 7/8" Electro-Galv. Staple M 10 *EF-25 3/16" x 1" Electro-Galv. Staple M 10 *EF-28 3/16" x 1-1/8" Electro-Galv. Staple M 10 *EF-32 3/16" x 1-1/4" Electro-Galv. Staple M 10 *EF-35 3/16" x 1-3/8" Electro-Galv. Staple 5M 10 *EF-38 3/16" x 1-1/2" Electro-Galv. Staple M Master Cartons per skid. 139

15 STAPLES 1/4" Crown Finishing Staples SENCO SKSL12L17 MAKITA AT638 CAMPBELL HAUSFELD SN258K00 Also ATRO MINOR 90/40, BEA 90/38-157, BERRYFAST 90/32 90/40, DEPOAN DPN673 JK782, DUOFAST KN-1848 BN1832S FASCO F25A-90/FASCO F25A 90/40 / F3C 90/40 / F4 90/40, HAUBOLD PN 6040A, HILTI SN-118 HCS-40, HITACHI N3804A/NB, MAKITA AT638, SENCO SKS L12-L17 NS100 NS150 NSS150 SKSL11-15 SLS20 L LN4450, SEARS 18406, SPOTNAIL FS4825 FS3852. Fastener Senco Qty./ Wt. Part No. Description Exchange Box Ctn. *EB-12 1/4" x 1/2" Electro-Galv. Staple L08 8M 5 *EB-16 1/4" x 5/8" Electro-Galv. Staple L10 8M 5 *EB-19 1/4" x 3/4" Electro-Galv. Staple L11 4M 10 *EB-22 1/4" x 7/8" Electro-Galv. Staple L12 4M 10 *EB-25 1/4" x 1" Electro-Galv. Staple L13 4M 10 *EB-28 1/4" x 1-1/8" Electro-Galv. Staple L14 4M 10 *EB-32 1/4" x 1-1/4" Electro-Galv. Staple L15 4M 10 *EB-35 1/4" x 1-3/8" Electro-Galv. Staple 4M 10 *EB-38 1/4" x 1-1/2" Electro-Galv. Staple L17 4M 10 *48 Master Cartons per skid. 7/16" Crown Sheathing/Decking Staples SENCO SKSN12-17 HITACHI N5008AA Also ATRO PANTA 100, FASCO F3C G 40 / F4P G 50 / F5 G 65, BEA 14/50-150, HITACHI N5008A1/AA/AB, ISM VULCANO 100, PORTER CABLE MS200 CMS200, SENCO M1 / M2, SNS50, SNS40, SNS45, SPOTNAIL HL661A/AP, AND STAN-TECH SDS SDS17-716QC. Fastener Senco Qty./ Wt. Part No. Description Exchange Ctn. Ctn. *L-16 7/16" x 5/8" Electro-Galv. Staple N10 20M 26 *L-19 7/16" x 3/4" Electro-Galv. Staple N11 20M 28 *L-22 7/16" x 7/8" Electro-Galv. Staple N12 10M 17 *L-25 7/16" x 1" Electro-Galv. Staple N13 10M 19 *L-28 7/16" x 1-1/8" Electro-Galv. Staple N14 10M 21 *L-32 7/16" x 1-1/4" Electro-Galv. Staple N15 10M 24 *L-38 7/16" x 1-1/2" Electro-Galv. Staple N17 10M 28 *L-44 7/16" x 1-3/4" Electro-Galv. Staple N19 10M 33 *L-50 7/16" x 2" Electro-Galv. Staple N21 10M 37 *48 Master Cartons per skid. 140

16 7/16" CROWN SHEATHING/DECKING STAPLES Pneumatics DUOFAST MS-7664A PASLODE 3150-S16 Also DUOFAST KS-7648 / MS-7664C KS7664 DS7656, HAUBOLD PN 764X, AND PASLODE MU-112- I I16P 3150-I16P Fastener Duofast Qty./ Wt. Part No. Description Exchange Ctn. Ctn. *Z-25 7/16" x 1" Electro-Galv. Staple M 28 *Z-32 7/16" x 1-1/4" Electro-Galv. Staple M 24 *Z-38 7/16" x 1-1/2" Electro-Galv. Staple M 28 *Z-44 7/16" x 1-3/4" Electro-Galv. Staple M 33 *Z-50 7/16" x 2" Electro-Galv. Staple M Cases per skid. 1/2" CROWN SHEATHING/DECKING STAPLES 16 GAUGE STANDARD CROWN BOSTITCH Also BOSTITCH T31-2SBNK / T36-50/T38-1 / T40S40S4ST / T50S4-2 / T55S4-1/2, HILTI SM-200B MCS 50, SPOTNAILS HL 7616A/AB, AND CAMPBELL HAUSFELD SM506D Fastener Bostitch Qty./ Wt. Part No. Description Exchange Ctn. Ctn. *S-16 1/2" x 5/8" Electro-Galv. Staple 20M 29 *S-19 1/2" x 3/4" Electro-Galv. Staple BCS M 31 *S-22 1/2" x 7/8" Electro-Galv. Staple BCS M 17 *S-25 1/2" x 1" Electro-Galv. Staple BCS M 20 *S-32 1/2" x 1-1/4" Electro-Galv. Staple BCS M 25 *S-38 1/2" x 1-1/2" Electro-Galv. Staple BCS M 29 *S-44 1/2" x 1-3/4" Electro-Galv. Staple BCS M 33 *S-50 1/2" x 2" Electro-Galv. Staple BCS M Cases per skid. 141

17 1/2" CROWN SHEATHING/DECKING STAPLES PASLODE 3200-S16 Also PASLODE PA-200-S16 / MU-112-S16 / MA-S16L IMP200S S16P S16P, AND FASCO F4P HD-50 / F5 HD-65. Fastener Paslode Qty./ Wt. Part No. Description Exchange Ctn. Ctn. *GX-19 1/2" x 3/4" Electro-Galv. Staple OT M 31 *GX-22 1/2" x 7/8" Electro-Galv. Staple 10M 17 *GX-25 1/2" x 1" Electro-Galv. Staple OT M 20 *GX-28 1/2" x 1-1/8" Electro-Galv. Staple OT M 21 *GX-32 1/2" x 1-1/4" Electro-Galv. Staple OT M 25 *GX-38 1/2" x 1-1/2" Electro-Galv. Staple OT M 29 *GX-44 1/2" x 1-3/4" Electro-Galv. Staple OT M 33 *GX-50 1/2" x 2" Electro-Galv. Staple OT M Cases per skid. 15/16" CROWN ROOFING STAPLES 16 GAUGE WIDE CROWN PASLODE 3150-W16 Also FASCO F3 PSW 38 / F3 PSW 38R and PASLODE MA-W16R / MU-112-W16R. Fastener Paslode Qty./ Wt. Part No. Description Exchange Ctn. Ctn. WT-16 15/16" x 5/8" Electro-Galv. Staple OT M 17 WT-19 15/16" x 3/4" Electro-Galv. Staple M 20 WT-22 15/16" x 7/8" Electro-Galv. Staple M 22 WT-25 15/16" x 1" Electro-Galv. Staple M 24 WT-32 15/16" x 1-1/4" Electro-Galv. Staple M 28 WT-38 15/16" x 1-1/2" Electro-Galv. Staple OT2855 5M Cases per skid. 142

18 1" CROWN ROOFING STAPLES 16 GAUGE WIDE CROWN ATRO PANTA 16WC Also ATRO 100, BEA 140/38-153, BERRYFAST RATTLER, BOSTITCH T35-8/T50S2 T35-32, FASCO F3ATW-38R HILTI SW-112A, ISM MINOR 38, SPOTNAIL HL1616A 1612A 1616A 1620, AND STANTECH SDS Fastener Bostitch Qty./ Wt. Part No. Description Exchange Ctn. Ctn. WC-16 1" x 5/8" Electro-Galv. Staple 10M 17 *WC-19 1" x 3/4" Electro-Galv. Staple BCS M 20 *WC-22 1" x 7/8" Electro-Galv. Staple BCS M 23 *WC-25 1" x 1" Electro-Galv. Staple BCS M 25 *WC-32 1" x 1-1/4" Electro-Galv. Staple BCS M 28 *WC-38 1" x 1-1/2" Electro-Galv. Staple BCS M 18 *64 Cases per skid. 1" CROWN ROOFING STAPLES 16 GAUGE SENCO SPS Also DEPOAN 6651, DUOFAST KW-1748R, 1748R RS1748AC KW1740 SR170/5170, FASCO F3C SNW38R / F30-SNW-50R F3CSNW-38CT F3SNW 38/50R, AND SENCO MW / PW. Fastener Senco Qty./ Wt. Part No. Description Exchange Ctn. Ctn. *WS-16 1" x 5/8" Electro-Galv. Staple P10BAB 10M 19 *WS-19 1" x 3/4" Electro-Galv. Staple P11BAB 10M 20 *WS-22 1" x 7/8" Electro-Galv. Staple P12BAB 10M 21 *WS-25 1" x 1" Electro-Galv. Staple P13BAB 10M 25 *WS-32 1" x 1-1/4" Electro-Galv. Staple P15BAB 10M 30 *WS-38 1" x 1-1/2" Electro-Galv. Staple P17BAB 5M 16 *64 Cases per skid. 143

19 Paper Tape Framing Nailer Part No. F33PT Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications Includes factory installed sequential trigger and exclusive Smart Trigger Patented push button adjustable depth guide sets nails to desired depths Lightweight magnesium design for added durability Drives 1-1/2" STRAPSHOT fasteners as well as all other 1-1/2" and 2-1/2" metal connector nails (.131".162" diameter) NAILERS STRAPSHOT Metal Connector Nailer Part No. MCN150 Compact design fits between 12" O.C. joists Low nail lockout prevents dry fires Exclusive safety system prevents misfires Exposed nail tip design fires in the hole for faster, more precise nailing Drives 1-1/2" paper tape collated metal connector nails (.131".148" diameter) 1-1/4" 18-Gauge Oil-Free Brad Nailer Kit Part No. BT125K-2 Lightweight magnesium design for added durability Oil-free operation requires no regular maintenance and eliminates the risk of oil stains Ultra-quiet rear exhaust Open nose design for easy jam clearing Adjustable depth guide sets nails to desired depths quickly and conveniently Kit includes: Brad Nailer, 1,000 1/4" Brad Nails, Carrying Case, Hex Wrench Impact Nailer Kit Part No. PN100K Ideal for driving common bulk nails in confined areas and for nailing of metal connectors and joist hangars Magnetic nose with recessed nail slot holds nails stable for accurate fastener placement Hardened steel nose for extreme durability Kit includes: Impact Nailer with Standard Nose, Finish Nail Nose, Large Bore Nose, Leather Comfort Glove, Nose Wrench, Hex Wrench, Tool Lubricant and Spare O-Rings 2" 18-Gauge Oil-Free Brad Nailer Kit Part No. BT200K-2 Lightweight magnesium design for added durability Oil-free operation requires no regular maintenance and eliminates the risk of oil stains Ultra-quiet rear exhaust directs air away from the user Adjustable depth guide sets nails to desired depths quickly and conveniently Kit includes: Brad Nailer, 1,000 2" Brad Nails, Carrying Case, Hex Wrench High-Power Coil Framing Nailer Part No. N89C-1 Lightweight magnesium design for added durability Patented push button adjustable depth guide sets nail to desired depths quickly and conveniently Coil magazine holds up to 300 nails for high production applications 144

20 Coil Sheathing/Siding Nailer Part No. N75C-1 Perfect for high-volume nailing of wall and roof sheathing Drives 15 wire weld collated and plastic inserted nails with shank diameters of.090".131" Lightweight aluminum design for added durability Adjustable depth guide sets nails to desired depths quickly and conveniently NAILER, STAPLER AND COMPRESSORS 3 Peak HP Oil-Lubricated Stack Tank Air Compressor Part No. CWC200ST Powerful 3 Peak HP 15 amp industrial induction motor with manual reset overload protection High output oil-lubricated pump with cast iron cylinder for maximum life Cold weather start assist system and synthetic pump oil for fast easy startup High-capacity 4-gallon air tank and high flow regulator for multi-tool use Ball type drain valves for simplified maintenance Industrial 1-1/2" 18-Gauge Finish Stapler Kit Part No. SB-150SX Tool-free adjustable exhaust conveniently directs exhaust away from the user Bottom load magazine for fast loading and easy jam clearing No-mar tip protects work surface Kit includes: Stapler, 1/4" Air Fitting, 1,000 1" Staples, Carrying Case and Oil 2.0 Peak HP, 6 Gal. Tank Oil-Free Air Compressor Part No. CAP2060P Powerful 2 Peak HP industrial induction motor with manual reset overload protection draws only 10.5 amps High output oil-free pump requires no maintenance High-capacity 6-gallon air tank and high flow regulator for multi-tool use Compact design for maximum portability and shop storage 1.0 Horsepower, 1 Gallon, Oil-Less Portable Air Compressor Part No. PC1010 One year warranty Hand carry-ultra quiet and lightweight, only 20 lbs. Direct drive motor/pump for efficient operation Aluminum cylinder 1.0 gallon of air capacity Standard equipment: regulator, pressure gauges, 1/4" universal coupler, air filter Comfortable cushioned grip Lubeless pump 1.5 Horsepower, Professional Contractor Compressor Part No. PC1130 Direct Drive Motor Includes 1/4 Coupler 1-1/2 Horsepower Cast Iron Sleeve/Cast Iron Head Cylinder Oil-Splash Lubrication : Height: 18.5" (469.9 mm) Length: 20.5" Max 115V: 13 Max Pressure: 125 psi Powersouce: Electric Weight: 39 lbs. (17.7 kg) 145

21 NAILERS Heavy-Duty 16 Gauge 1-1/4" 2-1/2" Finish Nailer Kit Part No. D51256K Lightweight magnesium housing delivers a 3.9 lb. unit among the lightest in the industry Tool-free depth adjustment assists in locating perfect depth setting Dual-load magazine with 160 nail capacity Swept-back contact trip with low profile no-mar pad allows for better visibility and durability Tool-free 360 exhaust channels air and dust away from user Trigger lock-off allows trigger to be disabled when not in use Includes: DEWALT Safety Glasses, 2 allen wrenches, replacement bump trigger and heavy-duty kit box Nail Diameter 16 gauge Nail Length Capacity 1-1/4" 2-1/2" Magazine Angle Straight Magazine Capacity 160 nails Magazine Loading Rear load, dual load Operating Pressure psi Depth Setting Tool-free indexed No Mar Pad Low profile rubber Integrated Belt Hook Tool-free Jam Clearing Tool-free Firing Mode Sequential trigger Heavy-Duty 18 Gauge 2" Cordless Brad Nailer Part No. DC608K Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints. Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. Straight magazine, accepts 18 gauge nails ranging in lengths from 5/8" to 2" Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches. Contact Trip Lock-Off disables the trigger when not in use and is easy to engage/disengage Integrated LED lights for long life and durability Top cap is impact resistant and easy to remove for troubleshooting Provides increased portability and versatility on the job-site. Increased visibility and durability along with protection for work-surface from the contact-trip. 12 position dial allows the user to move between applications without having to re-acquire exact depth setting Fully enclosed, box style magazine, keep dust and debris out of the magazine preventing the tool from malfunctioning Voltage 18 V Nailer Operating Mode selective Nailing rate 4-5 nails/sec Nail Diameter 18 gauge Magazine Angle straight degrees Nail Length Capacity 5/8" 2" Magazine Capacity 110 nails Magazine Loading box style Integrated Belt Hook Yes Jam Clearing Yes Tool Height 11.0" Tool Length 11.5" Tool Weight 7.4 lbs Tool Width 3.5" THINK SAFETY FIRST! Check out our safety supplies. 146

22 STAPLERS AND NAILER Heavy-Duty 1" 2" x 1/2" 16 Gauge Medium Crown Stapler Part No. D51431 Lightweight tool provides enhanced maneuverability and aids in minimizing user fatigue Cycle rate of 20 fasteners/second (@ 100 psi) provides a speed rating that works as fast as you do Low air consumption rating consumes less air per shot, allowing the tool to fire faster and more consistently Clean nose area aids in more exact fastener placement Tool-free jam clear eliminates down-time from bent fasteners caught in the nose piece Tool-free indexed depth adjustment is lockable and repeatable Tool-free 360 exhaust channels air and dust away Trigger lock-off allows trigger to be disabled when not in use Includes: DEWALT safety glasses, (2) Allen wrenches and replacement sequential trigger Heavy-Duty 1" 2" x 7/16" 16 Gauge Medium Crown Stapler Part No. D51430 Lightweight tool provides enhanced maneuverability and aids in minimizing user fatigue Cycle rate of 20 fasteners/second (@ 100 psi) provides a speed rating that works as fast as you do Low air consumption rating consumes less air per shot, allowing the tool to cycle faster and more consistently Clean nose area aids in more exact fastener placement Tool-free jam clear eliminates down-time from bent fasteners caught in the nose piece Tool-free indexed depth adjustment is lockable and repeatable Tool-free 360 exhaust channels air and dust away Trigger lock-off allows trigger to be disabled when not in use Includes: DEWALT safety glasses, (2) Allen wrenches and replacement sequential trigger Heavy-Duty 3/4" 1-3/4" Coil Roofing Nailer Part No. D51321 Lightweight (4.9 lb) tool with a magnesium housing provides enhanced maneuverability and aids in minimizing user fatigue Produces a cycle rate that works as fast as you do Delivers the power to consistently drive nails in the toughest applications Tool-free depth adjustment assists in locating the perfect depth setting for precise nail penetration Convenient side-load canister design allows for quick and easy nail loading Includes: DEWALT safety glasses, (2) Allen wrenches and replacement sequential trigger Fastener Style 16 Gauge Staple Crown Size 1/2" Fastener Length Capacity 1" 2" Magazine capacity 160 Staples Magazine Angle Straight Magazine Loading Top Load Operating Pressure psi Speed psi Depth Setting Tool-free indexed Jam Clearing Tool-free Padded Grips Textured anti-slip Exhaust 360 Air Consumption.039 scfm Firing Mode Bump trigger installed Air inlet 3/8" Trigger Lock Off Yes Fastener Style 16 Gauge Staple Crown Size 7/16" Fastener Length Capacity 1 2" Magazine capacity 160 Staples Magazine Angle Straight Magazine Loading Top Load Operating Pressure psi Speed psi Depth Setting Tool-free indexed Jam Clearing Tool-free Padded Grips Textured anti-slip Exhaust 360 Air Consumption.039 scfm Firing Mode Bump trigger installed Air inlet 3/8" Trigger Lock Off Yes Nail Style Coil Roofing Nail Diameter Range.120" Nail Length Capacity 3/4" 1-3/4" Canister Capacity 120 Operating Pressure psi Canister Loading 2-door side load Nose Piece Carbide Inserts Yes Depth Setting Tool-free thumb wheel Jam Clearing Integrated in nose door Steel Wear Guards Yes Nail Platform Adjustment Lever Yes Hinged Feed Piston Cover Yes Shingle Guide Yes Padded Grips Textured anti-slip Firing Mode Bump trigger installed Trigger Lock Off Yes 147

23 30 Framing Nailer Part No Features: Cordless. Lightweight and well-balanced. Powerful motor: Drives 2" to 3-1/4" fasteners for every framing application. Mobile. Compact size: Fits between 16" o.c. joists, studs, and roof trusses. Heavy-duty housing. Weight: 7.4 lbs. w/battery. Height: 14-1/2". Length: 12". Nail Range: RoundDrive or clipped head 2" to 3-1/4" in length with.113" to.131" shank diameters. Magazine Type: 30 degree. Nail Capacity: 1 strip up to 48 nails. Sequential Operation: 2 3 nails/second. Fuel Cell Life: 1,200 nails (approx.). Battery Cell Life: (Per charge) 4,000 nails (approx.). 16 Ga Straight Finish Nailer Part No Features: Cordless. No-Mar Tip with Sight Lines. Quick Clear Nose Cover. Powerful Motor Drives 3/4" to 2-1/2" fasteners. Tool-free-Depth-of-Drive Adjustment. Compact, Lightweight & Well Balanced. Nail Lock-out. Weight: 4.75 lbs. with battery. Height: 11.75". Length: 10.5". Nail Range: 3/4" to 2-1/2". Magazine Type: Straight. Nail Capacity: 110 (2 strips). Sequential Operation:2 3 nails/second. Fuel cell life: 1200 nails (approx.). Battery Cell Life: (Per charge) 4000 nails (approx.). Cordless 16 Ga Angled Finish Nailer Part No Features: Cordless. Angled magazine. Powerful motor: Drives 1-1/4" to 2-1/2" fasteners. Tool-free Depth-of-Drive Adjustment. Nail Lockout: Locks out tool at 10 nails to prevent blank firing and minimize wood damage. Comfortable Sure-Grip Handle & Soft Trigger. No-Mar Tip with Sight Lines. Weight: 4.9 lbs. w/battery. Height: 11-1/2". Length: 10-3/4". Width: 3-1/4". Nail Range: 1-1/4" to 2-1/2". Magazine Type: Angled. Nail Capacity: 100 (2 strips). Sequential Operation: 2 3 nails/second. Fuel Cell Life: 1,200 nails (approx.). Battery Cell Life: (Per charge) 4,000 nails (approx.). 18 Ga Brad Nailer Part No Features: Cordless. Tool-Free Depth-of-Drive Adjustment. Comfortable Sure-Grip Handle & Soft Trigger. Side Loading Magazine. Quick-Clear Nose Cover. Narrow No-Mar Tip. Powerful Motor: Drives 5/8" to 2" fasteners into the hardest woods. Drives 18 Gauge Finish Nails. Lightweight and Well-Balanced. Weight: 4.9 lbs. w/battery. Height: 11-1/2 inches. Length: 11". Width: 3-1/2". Nail Range: 5/8" to 2". Magazine Type: Straight. Nail Capacity: 100 (2 strips). Sequential Operation: 2 3 nails/second. Fuel cell life: 1,200 nails (approx.). Battery Cell Life: (Per charge) 4,000 nails (approx). 148

24 STAPLER, COMPRESSOR Pneumatics Crown Stapler Part No. N5008AC Fastest driving speed of any other industry stapler in its class with a rate of 12.7 staples per second. Quick response due to outstanding cylinder valve firing mechanism Quick clear, single touch, jam release Depth of drive adjustment Superior ergonomic design Extremely lightweight (4.4 lbs.) due to its plastic magazine Durable rubber grip 3/8" Air Inlet and Dimensions of 14-3/8" x 10" x 3" Optional Accesssory: Single Trip Trigger Mechanism (876762) Powermaster Plus Nailer Part No Overmold Grip Rafter Hook Ruler on Magazine Bolt on End Plug Unmatched Power-to- Weight Ratio The Lightest 3-1/2" Nailer Ergonomic Design Adjustable Work Contacting Element Durable and Reliable NAILER Siding Coil Nailer Part No. AN611 Easy load canister Rubber grip for comfortable handling Nail mode selector provides sequential or bounce fire Depth setting knob for easy adjustment of nailing depth Built-in air filter prevents dust or foreign matter from entering the tool 360 exhaust system directs exhaust away from operator Rubber bumper protects tool housing Silent sheet reduces noise when disconnecting coupler Portable Electric 2hp Air Compressor, Oil Lubricated Part No. EC12 4.0cfm at 90psi for multiple operations Direct drive electric motor provides durability and long life Line regulator with gauge for immediate use at worksite O-ring on drain-cock makes valve easy to open and close Vertically stacked twin tanks, 2 gallon capacity each for running multiple nailers All metal inner construction and fan to withstand rugged use Oil lubricated pump improves efficiency and ensures smooth use NAILERS 16 Gauge Finish Nailer Part No Powerful Lightweight and Well Balanced Tool-free Adjustable Depth of Drive Directional Exhaust Cap Rear Load Magazine with Two-Step Follower Selectable Fire Trigger Comes with Rugged Carrying Case NAILER Heavy-Duty 16 Gauge 1-1/4" 2-1/2" Finish Nailer Kit Part No. D51256K Lightweight magnesium housing delivers a 3.9 lb. unit among the lightest in the industry Tool-free depth adjustment assists in locating perfect depth setting Dual-load magazine with 160 nail capacity Swept-back contact trip with low profile no-mar pad allows for better visibility and durability Tool-free 360 exhaust channels air and dust away from user Trigger lock-off allows trigger to be disabled when not in use Includes: DEWALT Safety Glasses, 2 allen wrenches, replacement bump trigger and heavy-duty kit box 149

25 NAILER KITS Heavy-Duty XRP 18V Cordless 1-1/4" 2-1/2" 16 Gauge Straight Finish Nailer Kit Part No. DC616K Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints. Voltage 18V Nailer Operating Mode selective Nailing rate 4 5 nails/sec Nail Diameter 16 gauge Magazine Angle straight Nail Length Capacity 1-1/4" 2-1/2" Magazine Capacity up to 110 nails Magazine Loading rear load Integrated Belt Hook yes Jam Clearing yes Heavy-Duty XRP 18V Cordless 1-1/4" 2-1/2" 16 Gauge 20 Angled Finish Nailer Kit Part No. DC618K Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. Voltage 18V Nailer Operating Mode selective Nailing rate 4 5 nails/sec Nail Diameter 16 gauge Magazine Angle 20 Nail Length Capacity 1-1/4" 2-1/2" Magazine Capacity up to 110 nails Magazine Loading rear-load Integrated Belt Hook yes Jam Clearing yes Heavy-Duty XRP 18V Cordless 1-1/4" 2-1/2" 15 Gauge 34 Angled Finish Nailer Kit Part No. DC628K Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches. Voltage 18V Nailer Operating Mode selective Nailing rate 4 5 nails/sec Nail Diameter 15 gauge DA type gauge Magazine Angle 34 Nail Length Capacity 1-1/4" 2-1/2" Magazine Capacity up to 110 nails Magazine Loading rear-load Integrated Belt Hook yes Jam Clearing yes TOOL LUBRICANT 1 Pt. Industrial Pneumatic Tool Lubricant Part No. BC602 Tips to Improve Your Bostitch Tool & Compressor Performance: Put a few drops of oil in the air fitting of your Bostitch Tool in the morning and then again in the afternoon. That s all you need to keep your Bostitch Tool running smoothly. Always use approved non-detergent oil. Note: Not all Bostitch products require oil 1 Pt. Industrial Cold Weather Pneumatic Tool Lubricant Part No Winteroil Features and Benefits Tips to Improve Your Bostitch Tool & Compressor Performance: Designed for use in cold weather, prevents freeze ups. Put a few drops of oil in the air fitting of your Bostitch Tool in the morning and then again in the afternoon. That s all you need to keep your Bostitch Tool running smoothly. Always use approved non-detergent oil. Note: Not all Bostitch products require oil Part No. PC0629 PC0630 TOOL BELT HOOKS Description X-wide 1/4" Belt Hook X-wide 3/8" Belt Hook Call for all your Air Hose & Accessory Needs 150

26 NAILERS 18 Gauge Brad Nailer Part No. NT32AE(S) Tool-less, easy-to-clear nose Operating Pressure psi ( bar, kfg/cm 2 ) Dimensions (LxHxW) 9-7/8" x 7-1/4" x 2-1/8" (251 mm x 185 mm x 54 mm) Weight 2.4 lbs. (1.1 kg) Nail capacity 100 nails.025 ft 3 /cycle at 100 psi) Air consumption (.73 ltr/cycle at 6.9 bar) (.73 ltr/cycle at 7 kgf/cm 2 ) Angled Finish Nailer Part No. NT65MA2 Air plug already installed for plug-and-play Fastener Type 15 Gauge Finish Magazine Angle 34 Degrees Fastener Length Capacity 1-1/4" 2-1/2" Fastener Diameter Range 15 Gauge Magazine Capacity 100 Magazine Loading Rear Air Inlet 1/4" Operating Pressure psi Exhaust Deflector 360-Degree Adjustable Jam Clearing Tool-Less Depth Setting Tool-Less Actuation Selective (Sequential/Bump Fire) Air Consumption.042(FT3/Cycle@100psi) NV65AH Siding Nailer, Coil, Wire/Plastic Sheet Collation Part No. NV65AH Optional accessory: single trip trigger mechanism Fastener Type Coil, Wire/Plastic Sheet Collation Magazine Angle 16 Degrees Fastener Length Capacity 1-1/2" 2-1/2" Fastener Diameter Range Magazine Capacity Magazine Loading Side Air Inlet 3/8" Operating Pressure psi Actuation Contact Optional Sequence Air Consumption.049(FT3/Cycle@100psi) Siding/Framing Nailer, Coil, Wire/Plastic Sheet Collation Part No. NV75AG Plastic shield, deflects wire collation for added safety Actuation Air Consumption Fastener Type Fastener Length Capacity 1-3/4" 3" Fastener Diameter Range Magazine Capacity Air Inlet 3/8" Operating Pressure psi 2" Cap Nailer Part No. NV50AP3 Exceptional Hitachi balance and fully adjustable exhaust make this the ideal tool for Tyvek installation, tar paper and any other sheathing Contact Optional Sequence.064(FT3/Cycle@100psi) Coil, Wire/Plastic Sheet Collation Operating Pressure Nail or Staple Nail Cap Capacity 350 Nail Capacity 350 Fastener Length 7/8" 2" Washer Type Plastic and Steel (Roll) Depth Adjustment Tool-less Fastener Type Nail Full Round Head-Wire Coil Fastener Type Cap Plastic/Plastic,Steel/Tape Fastener Diameter Range.083 Magazine Angle 16 Degrees Air Inlet 3/8" Actuation Selective (sequential/contact) Air Consumption.042 Roofing Nailer, Coil, Wire Collation Side Load Part No. NV45AE Available equipped with power pack- NV45AB2H (5.7lbs) Fastener Diameter Range Magazine Capacity 120 Magazine Loading Side Air Inlet 3/8" Operating Pressure psi Jam Clearing Open-nose Depth Setting Tool-Less Actuation Contact, Sequential Optional L x W x H 9-27/32" x 4-5/8" x 10-3/8" Tool Weight 5.5 lbs Fastener Type Coil, Wire Collation Magazine Angle 16-Degrees Fastener Length Capacity 7/8" to 1-3/4" 151

27 NAILERS Framing Nailer, Clipped Head, Paper Strip Collation Part No. NR83AA3 8.4lbs, lightweight and well balanced for easy maneuverability Fastener Type Clipped Head, Paper Strip Collation 34 Degrees Magazine Angle Fastener Length Capacity 2" 3-1/4" Fastener Diameter Range.113 to.131 Magazine Capacity Magazine Loading Rear Air Inlet 3/8" Operating Pressure psi Air Consumption.088 Jam Clearing Open Nose 28 Degree Offset Round Head Wire Collation Part No. NR90AF Fastens up to 3-1/2 X.131 nails into stacked engineered lumber Fastener Type Offset Round, Wire Collation Magazine Angle 28 Fastener Length Capacity 2" 3-1/2" Fastener Diameter Range Magazine Capacity 100 Magazine Loading Rear Air Inlet 3/8" Operating Pressure psi Jam Clearing Open Nose Depth-setting Tool-less Actuation Selective; Sequential/Contact L x W x H 21-5/16" x 4-15/16" x 12-11/16" Weight 7.3 lbs Need help with specifications? Our qualified staff will be glad to assist you. 3-1/2" Gas Powered Round Head Framing Nailer Part No. NR90GR Gas Powered, operates on fuel rod and cordless battery offering complete portability through elimination of air hose and compressor Nail Type Full Round Head Nail Diameter Range in Nail Length Range 2" 3-1/2" Magazine Angle 20 Degrees Magazine Capacity Nails Battery Life 4,000 Nails Battery 7.2V Charger 1 Hour Fuel Rod Life 1,200 Nails Framing Nailer, Full Head, Plastic Strip Collation Part No. NR90AC3 Excellent power to weight ratio, ideal for modern materials like engineered lumber Fastener Type Full Head, Plastic Strip Collation Magazine Angle 20 Degrees Fastener Length Capacity 2-3/8" 3-1/2" Fastener Diameter Range.113 to.162 Magazine Capacity Magazine Loading Rear Air Inlet 3/8" Operating Pressure psi Jam Clearing Open Nose Strap-Tite Fastening System with Short Magazine Part No. NR65AK(S) Racket grip, for added comfort and temperature protection Fastener Type Strap-Tite, Paper Strip Collation Magazine Angle 36 Degrees Fastener Length Capacity 1-1/2" 2-1/2" Fastener Diameter Range Magazine Capacity 22 Magazine Loading Rear Air Inlet 3/8" Operating Pressure psi Jam Clearing Open Nose Depth Setting N/A Actuation Sequential Air Consumption.063(FT3/Cycle@100psi) 152

28 GENUINE AIR NAILS Coil Nails Part No. Description Box/Count Brite Coil Nails " Smooth 5M " Ring 5M /8" Smooth 5M /8" Ring 5M " Smooth 4M /4" Smooth 4M Hot Dipped Galvanized " Ring 4M /8" Ring 4M " Ring 4M /2" Smooth 4M " Smooth 4M /4" Smooth 4M Stainless Wire Coil Nails Part No. Description Box/Count /8" x.113 Ring 5M " x.120 Ring 4M Plastic Cap Coil Nails Part No. Description Box/Count /4" w/caps 2.8M " w/caps 2.8M Hot Galvanized Coil Siding (Plastic Collated) Part No. Description Box/Count /4" x.086 Ring 6M " x.092 Ring 6M /4" x.092 Ring 4.8M /2" x.092 Ring 4.8M Stick Nails Part No. Description Box/Count Brite Plastic Stick Nails " x.113 RG Brite 6M /8" x.113 SM Brite 5M /8" x.113 Ring 5M " x.120 Smooth 4M /4" x.120 Smooth 4M /4" x.131 Smooth 4M /2" x.131 Smooth 4M Hot Dipped Galvanized /8" Ring 5M /8" Smooth 5M " x.120 Smooth 4M /4" x.131 Smooth 4M /2" x.131 Smooth 4M Stainless Steel 304 Plastic Stick Nails Part No. Description Box/Count /8" x.113 Ring 5M " x.131 Ring 4M /4" x.120 Ring 4M Joist Hanger Nails Part No. Description Box/Count /2" x.148 Brite 3M /2" x.148 Brite 2.5M /2" x.148 Galvanized 3M /2" x.148 Galvanized 2.5M Hot Galvanized Coil Siding (Wire Collated) Part No. Description Box/Count /4" x.092 Ring 3.6M " x.092 Ring 3.6M /4" x.092 Ring 3.6M /2" x.092 Ring 3.6M Stainless Steel Siding Nails Part No. Description Box/Count /4" x.092 Plastic Col Ring 4.8M /4" x.090 Wire Col Ring 3.6M /4" x.090 Wire Col Ring 3.6M " x.090 Wire Col Ring 3.6M We have thousands of items in stock ready for delivery. 153

29 Finish Nailers and Staplers Full Round Head Framing Nailer Part No. SN902XP This well-balanced lighweight XP framing nailer packs plenty of power and won t leave you fatigued at the end of the day. Drives ring, screw, and smooth-shank full round head nails for tough fastening jobs. SENCO XP tools are specifically engineered for demanding pros and demanding enviroments. Built with enhanced features and superior components SENCO s XP tools always provide the best performance and longest life backed by a 5-year limited warranty. TOOL SPECIFICATIONS Height: 11.65" (296 mm) Length: 20.3" (516 mm) Weight: 7.4 lb ( 3.4 kg) Reg. Operating Pressure: psig ( bar) Collation: Plastic Strip Mode of Operation: Contact or Sequential Actuation FramePro 701XP Clipped Head Nails Part No. 701XP Full two-year warranty Upgraded XtremePro internal features include: anodized sleeve for additional strength and durability; urethane sleeve cap protects sleeve from wear; fixed firing valve improves tool life and speed; and positive stop guide body aligns nail and driver for consistent drive TOOL SPECIFICATIONS Height: 13-1/4" ( mm) Length: 15" (381 mm) Weight: 8.0 lb (3.6 kg) Reg. Operating Pressure: psig ( bar) Mode of Operation: Contact or Sequential Actuation FramePro 702XP Full Round Head Nails Part No. 702XP Two-year warranty Upgraded XtremePro internal features include: anodized sleeve for additional strength and durability; urethane sleeve cap protects sleeve from wear; fixed firing valve improves tool life and speed Comfort and convenience features include: overmold comfort grip, overmold trigger, 360 adjustable exhaust, rafter hanger and construction ruler TOOL SPECIFICATIONS Height: 13-1/4" ( mm) Length: 20" (508 mm) Weight: 8.4 lb (3.81 kg) Reg. Operating Pressure: psig ( bar) Mode of Operation: Contact or Sequential Actuation 23 Gauge Pins Part No. FinishPro 10 Rear exhaust Directs oil and dust away Smooth metal cap For durability and protection of work materials Easy fastener length adjustment Quickly adjusts to desired fastener length Easy-open latch For quick and comfortable loading Hardened alloy steel driver For durability Soft grip handle Extra comfort and control Extra power For use in hard woods Low load alert Visible fastener load with reload indicator One-year warranty Includes case, fittings, repair tools, oil and fastener rebate TOOL SPECIFICATIONS Height: 6-3/4" (171 mm) Length: 8-7/8" (225 mm) Weight: 2.35 lb (1.1 kg) Reg. Operating Pressure: psig Mode of Operation: Single Actuation 18 Gauge Pins Part No. LS1 The compact LS pinners are designed for easy maneuverability in small places. Lightweight (2.8 lb) for easy handling. The bottom-load magazine is quick to load, minimizing reloading downtime. The length selector enables operator to quickly convert the LS1 to drive 1/2", 3/4" and 1" pins. This easy-to-operate tool requires minimum maintenance. TOOL SPECIFICATIONS Height: 7-3/4" Length: 8-3/4" Weight: 2.8 lb Reg. Operating Pressure: psig Mode of Operation: Sequential Actuation SLP20 18 Gauge Brad Nailer Part No. SLP20XP Maneuverable and at 2.3 lb, the lightest on the market Neverlube Design means no tool lubrication to stain fine woods Easy to maintain and service only two movable O-rings for virtually trouble-free upkeep Includes hard plastic case TOOL SPECIFICATIONS Height: 8-1/4" (210 mm) Length: 9-1/2" (241 mm) Weight: 2.3 lb (1.0 kg) Reg. Operating Pressure: psig ( bar) Collation: GWE Mode of Operation: Sequential Actuation 157

30 Finish Nailers and Staplers Wire Stapler Part No. SLS25XPL/SLS25XPM Two-year warranty Lightweight (2.7 lbs) for ease of handling Ergonomically designed with an overmold handle to reduce fatigue and overmold trigger Adjustable depth-of-drive for precise staple setting 40% more power than comparable tools Heavy-duty components, including an aluminum sleeve and piston, mean rugged durability even in high volume production environments No-mar pad keeps work surfaces free of marks Oil-free design means easier maintenance and no lubrication to stain fine wood Muffler ensures quiet operation Dual action or restrictive tools are available, depending on whether repetitive high productivity or precision fastener placement is more important TOOL SPECIFICATIONS Height: 9" (229 mm) Length: 12" (305 mm) Weight: 2.7 lb (1.2 kg) Reg. Operating Pressure: psig ( bar) Mode of Operation: Contact or Sequential Actuation FinishPro Gauge Nails Part No. FP32 Adjustable depth-of-drive Adjustable exhaust Keeps oil and dust away from work surface Belt hook For convenience Full soft grip For comfort and control No-mar pad To protect work materials Rear bumper To protect the work surface Available in dual action or restrictive fire One-year warranty Includes case, fitting and oil TOOL SPECIFICATIONS Height: 10.6" (269 mm) Length: 12" (304 mm) Weight: 4.0 lb (1.8 kg) Reg. Operating Pressure: psig ( bar) Mode of Operation: Contact or Sequential Actuation 2.5 Horsepower Compressor Part No. PC1131 Direct Drive Motor Includes 1/4 Coupler 1-1/2 Horsepower Cast Iron Sleeve/Cast Iron Head Cylinder Twin Tank Configuration Oil-Splash Lubrication TOOL SPECIFICATIONS Height: 16.5" (419 mm) Length: 20" (508 mm) Max Pressure: 125 psi Weight: 60 lb (27.2 kg) Heavy-Wire Stapler Part No. SNS41 Adjustable Depth of Drive Over-Mold Comfort Grip Tool Oil Required Aluminum Housing Easy Clear Jam Clearing 360 Degree Adjustable Exhaust One-Year Warranty TOOL SPECIFICATIONS Height: " (273 mm) Length: 15" (380 mm) Weight: 4.6 lbs. lb (2.09 kg) Reg. Operating Pressure: psig ( Bar bar) Mode of Operation: Contact Actuation Cordless Finish 41 Part No. CF41 Adjustable Depth of Drive Stretch Comfort Grip No Mar Pad Easy Clear Jam Clearing Two-Year Warranty Includes case, 2 Batteries and 1-Hour Charger TOOL SPECIFICATIONS Height: 11-7/8" (301 mm) Length: 11-3/4" (298 mm) Weight: 6.3 lb (2.8 kg) Fastener Capacity: 110 Collation: Plastic Strip Mode of Operation: Contact or Sequential Actuation Power Source: Cordless Battery Voltage: 14.4 Joist Hanger Nailer Part No. HN250 Tool Oil Required One-Year Warranty Belt Hooks TOOL SPECIFICATIONS Height: 11" (279.4 mm) Length: 12" (304.8 mm) Weight: 4.8 lb (2.18 kg) Reg. Operating Pressure: psig Collation: Paper Tape Angled Mini Hand Nailer Part No. PC1195 Compact & powerful enough to drive 2" 3" bulk nails Small size for accessibility Ultra-light at just 1 lb. Included fitting provides plug-and-play convenience out of the box 1-year limited warranty TOOL SPECIFICATIONS Height: 4" (101 mm) Length: 2.75" (70 mm) Width: 2" (55.6 mm) 158

31 Fasteners Pneumatic Systems for Attaching Exterior Sheathing to Light Gauge Steel Framing Applications Exterior Gypsum sheathing to steel framing (20-14 gauge) Plywood and OSB sheathing/flooring Wood furring to steel framing Fiber cement panels to steel framing Woven wire mesh or expanded metal lath to steel framing Features High performance pneumatic fastening system is 3-5 times faster than screws. 150 nails in a coil reduces reloading improves productivity. Collation provides smooth, consistent operation with no flagging or breakage. Aggressive, patented nail shank design provides high pullout performance. Contoured bugle head style provides high pullover (wind) resistance. Long life Climacoat finish is 10 times more corrosion resistant than electro-zinc plating. Approvals and Listings ICBO ER 5380 (Plywood diaphragm) ICBO ER 6070 (Gypsum sheathing) Georgia Pacific Recognition Letter UL Fire Resistance Ratings ANSI/UL 263 BX UV.V458 3rd Party Independent Testing Nail Withdrawl/Tensile Tests: Hardiplank Report # Withdrawl Test - Report # Negative Wind Load Test Report #J Product Dimensions GypFast Air GypFast Air HD Weight 5.5 lbs. 6.0 lbs. Height 13.0 inches 14.5 inches Length 12.0 inches 13.5 inches Nails Lengths 1", 1-1/2", 2" and 2-1/2" Diameter.140" Nominal Head Style 5/16" dia. bugle head Finish Climacoat Long Life Polymer 349