RESIDENTIAL HANGERS. ABBREVIATED CATALOG & BASE PRICE LIST RH-0608 (Cancels Base Price List RH-0308)
|
|
- David Chapman
- 5 years ago
- Views:
Transcription
1 RESIDENTIAL HANGERS ABBREVIATED CATALOG & BASE PRICE LIST RH-0608 (Cancels Base Price List RH-0308)
2 CONSTRUCTION FASTENERS TERMS and CONDITIONS of SALE Effective PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated. 2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller s acceptance of an order, but seller assumes no responsibility or liability, and will accept no back charge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay. 3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller s responsibility ceases and the title passes on delivery to the carrier. 4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded). 5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-to-order products (either published or unpublished) are non-cancelable / non-returnable. 6. PRODUCT APPLICATION: Seller s products are intended for installation and service as illustrated or described in seller s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication. Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller. In accordance with our product development program, we reserve the right to revise the design and application of our products without notification. For latest product information, please contact the nearest Carpenter & Paterson office. 7. WARRANTY: Carpenter & Paterson, Inc. warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product. Where engineering design or fabrication work is supplied, Buyer s acceptance of Seller s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson s product warranty. The foregoing constitutes the Purchaser s sole and exclusive remedy under Carpenter & Paterson warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MERCHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTUOUS ACT OR OMISSION. The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification. 8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities. 9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $ will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors. 10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees.
3 TABLE OF CONTENTS PAGE SECTION I BANDS, SWIVELS, CLEVIS HANGERS & RISERS CLAMPS 4 SECTION II SPLIT RINGS, PLATES AND SIDE BEAMS 8 SECTION III PERFORATED HANGERS 10 SECTION IV TUBE CLIPS & STRAPS 12 SECTION V WIRE PIPE HOOKS & STUD PLATES 14 SECTION VI MULTI STRUT / PIPE ALIGNMENT 16 SECTION VII FASTENERS 18 SECTION VIII ANCHORS 21 SECTION IX SPECIALS 24 DISCOUNT SCHEDULE PRODUCT TYPE SECTION MULTIPLIER Residential Hangers I, II, III, IV, V Multistrut, Pipe Alignment VI Fasteners, Anchors VII, VII Specials, Other Catalogs IX Contact your nearest Carpenter & Paterson Sales Office for applicable discounts.
4 COPPER A BAND HANGER CARPENTER & PATERSON, INC. CT 1A CT Wgt. Box 1/2" $ /4" " /4" /2" " /2" " /2" " COPPER SWIVEL RING COPPER CLEVIS HANGER CT 800 CT Wgt. Box 1/2" $ /4" " /4" /2" " /2" " /2" " CT 100 CT Wgt. Box 1/2" $ /4" " /4" /2" " /2" " /2" " Call your local sales office for additional residential hanger prices and availability 4
5 IPS A BAND HANGER IPS NFPA SWIVEL HANGER IPS CLEVIS HANGER CARPENTER & PATERSON, INC. IPS 1A 1A E 1A SS Wgt. Box Size Plain ElectroG Type 304 Each Quantity 1/2" $1.87 $2.60 $ /4" " /4" /2" " /2" " /2" " IPS 800FP E Wgt. Box Size ElectroG Each Quantity 1/2" $ /4" " /4" /2" " /2" " /2" " IPS E 100 G 100 SS Wgt. Box Size Plain ElectroG Galv. Type 316 Each Quantity 1/2" $3.96 $5.29 $ /4" " /4" /2" " /2" " /2" " Call your local sales office for additional residential hanger prices and availability 5
6 IPS PVC COATED A BAND HANGER IPS 1A PVC Wgt. Box Size Plain Each Quantity 1/2" $ /4" " /4" /2" " /2" " /2" " IPS PVC COATED SWIVEL HANGER IPS 800 PVC Wgt. Box Size ElectroG Each Quantity 1/2" $ /4" " /4" /2" " /2" " /2" " IPS PVC COATED CLEVIS HANGER IPS 100 PVC Wgt. Box Size Plain Each Quantity 1/2" $ /4" " /4" /2" " /2" " /2" " Call your local sales office for additional residential hanger prices and availability 6
7 IPS D.W.V LIGHT DUTY PVC COATED RISER CLAMP IPS 126LD PVC Wgt. Box Size PVC Each Quantity 1-1/2" $ " " " IPS D.W.V LIGHT DUTY RISER CLAMP IPS 126LD Wgt. Box Size Plain Each Quantity 1-1/2" $ " " " COPPER RISER CLAMP IPS RISER CLAMP CT 126 CT Wgt. Box 1/2" $ /4" " /4" /2" " /2" " /2" " IPS E 126 G 126 SS Wgt. Box Size Plain ElectroG Galv. Type 316 Each Quantity 1/2" $11.44 $15.27 $18.76 $ /4" " /4" /2" " /2" " /2" " *PVC COATED ALSO AVAILABLE Call your local sales office for additional residential hanger prices and availability 7
8 COPPER HINGED SPLIT RING CT 81RT CT Wgt. Box 1/4" $ /8" /2" /4" " /4" /2" " /2" " " COPPER TWO SCREW SPLIT RING CT 81RT2 CT Wgt. Box 1/4" $ /8" /2" /4" " /4" /2" " /2" " " COPPER CEILING PLATE Rod 85RT CT Wgt. Box 3/8" $ /2" Call your local sales office for additional residential hanger prices and availability 8
9 IPS HINGED SPLIT RING IPS 81RT E 81RT 81RT SS Wgt. Box Size ElectroG Plain Type 316 Each Quantity 3/8" $9.74 $7.48 $ /2" /4" " /4" /2" " /2" " " IPS TWO SCREW SPLIT RING IPS 81RT2 E 81RT2 Wgt. Box Size ElectroG Plain Each Quantity 3/8" $9.83 $ /2" /4" " /4" /2" " /2" " " IPS CEILING PLATE Rod 85RT E 85RT 85RT SS Wgt. Box Size ElectroG Plain Type 316 Each Quantity 3/8" $6.66 $5.28 $ /2" SIDE BEAM HANGER Rod E Wgt. Box Size Plain ElectroG Each Quantity 3/8" $2.26 $ /2" Call your local sales office for additional residential hanger prices and availability 9
10 MILFORD HANGER CT MPH Wgt. Box 1/2X6" $ /4X6" X6" /4X6" /2X6" X6" /2X12" /4X12" X12" /4X12" /2X12" X12" NATICK HANGER CT NPH Wgt. Box 1/2X6" $ /4X6" X6" /4X6" /2X6" X6" /2X12" /4X12" X12" /4X12" /2X12" X12" D.W.V. HANGER IPS DWV Wgt. Box Size ElectroG Each Quantity 1-1/2" $ " " " Call your local sales office for additional residential hanger prices and availability 10
11 D.W.V. PVC COATED HANGER IPS DWV PVC Wgt. Box Size ElectroG Each Quantity 1-1/2" $ " " " COPPER PERFORATED STRAPPING Prices shown are list prices per foot 3/4" 22GA Wgt. Feet Size Copper Per Roll Per Roll 10' $ ' ' PERFORATED STRAPPING Prices shown are list prices per foot 3/4" 20GA 22GA 24GA Wgt. Feet Size Plain Plain Plain Per Roll Per Roll 10' $1.17 $1.10 $ ' ' ZINC PERFORATED STRAPPING Prices shown are list prices per foot 3/4" 20GA 22GA 24GA Wgt. Feet Size ElectroG ElectroG ElectroG Per Roll Per Roll 10' $1.38 $1.21 $ ' ' Call your local sales office for additional residential hanger prices and availability 11
12 COPPER VAN (BELL) HANGER CT 66 CT Wgt. Box 3/8" $ /2" /4" " /4" /2" " COPPER TWO HOLE PIPE STRAP CT 72 CT Wgt. Box 1/4" $ /8" /2" /4" " /4" /2" " IPS ZINC TWO HOLE PIPE STRAP CT 72 E Wgt. Box Size ElectroG Each Quantity 1/4" $ /8" /2" /4" " /4" /2" " Call your local sales office for additional residential hanger prices and availability 12
13 PLASTIC 511 CT 511 Wgt. Box Size Plastic Each Quantity 1/2" $ /4" " PLASTIC 513 CT 513 Wgt. Box Size Plastic Each Quantity 1/2" $ /4" PLASTIC 515 CT 515 Wgt. Box Size Plastic Each Quantity 1/2" $ /4" " PLASTIC 517 CT 517 Wgt. Box Size Plastic Each Quantity 1/2" $ /4" " /4" /2" " Call your local sales office for additional residential hanger prices and availability 13
14 COPPER WIRE PIPE HOOKS CT 111 CT Wgt. Box Size Length Copper Each Quantity 1/2" X4" $ /2" X6" /2" X8" /2" X10" /2" X12" /4" X4" /4" X6" /4" X8" /4" X10" /4" X12" " X4" " X6" " X8" " X10" " X12" /4" X6" /4" X8" /4" X10" /4" X12" /2" X6" /2" X8" /2" X10" /2" X12" " X6" " X8" " X10" " X12" " X12" " X12" STUD GUARD SG Wgt. Box Length ElectroG Each Quantity 3" $ " " Call your local sales office for additional residential hanger prices and availability 14
15 IPS WIRE PIPE HOOKS PROTECTIVE PLATES PROTECTIVE PLATES CARPENTER & PATERSON, INC. IPS 111 Wgt. Box Size Length Plain Each Quantity 1/2" X4" $ /2" X6" /2" X8" /2" X10" /2" X12" /4" X4" /4" X6" /4" X8" /4" X10" /4" X12" " X4" " X6" " X8" " X10" " X12" /4" X6" /4" X8" /4" X10" /4" X12" /2" X6" /2" X8" /2" X10" /2" X12" " X6" " X8" " X10" " X12" " X12" " X12" /2"X FHA18 Wgt. Box Length ElectroG Each Quantity 9" $ " " " "X FHA18 Wgt. Box Length ElectroG Each Quantity 6" $ " " " Call your local sales office for additional residential hanger prices and availability 15
16 Prices shown are list prices per foot MULTI STRUT Slotted Painted Wgt. Bundle M164 Gauge Pre Galv Green Per Foot Quantity 13/16" X 10' 14GA P.O.A. $ /16" X 20' 14GA P.O.A. $ M /8" X 10' 14GA P.O.A /8" X 20" 14GA P.O.A M /8" X 10' 12GA P.O.A /8" X 20" 12GA P.O.A *DIFFERENT SIZES, FINISHES AND CONFIGURATIONS AVAILABLE UPON REQUEST PIPEFIX POSIFIX STAKFIX SUMNER PIPE ALIGNMENT Wgt. Box Model Plastic Each Quantity PIPEFIX $ POSIFIX STAKFIX Call your local sales office for additional residential hanger prices and availability 16
17 HOLDRITE #101 HOLDRITE #102 HOLDRITE #107 HOLDRITE #108 HOLDRITE #114 CT Wgt. Box H /2" $ H101-18R 1/2&3/4" H /4&1" CT Wgt. Box H /8,1-1/8" $ H /4,1" CT Wgt. Box H /2,3/4,1" $ H /2.3/4,1,1-1/4" CT Wgt. Box H /2,3/4,1" $ H /2,3/4,1" CT Wgt. Box H114-C 1" $ H114-CO 1" H114-CR 1" H114-EXT HOLDRITE METAL STUD INSULATORS CT Wgt. Box Size Plastic Each Quantity H404R 1/2" $ H405R 3/4" H406R 1" Call your local sales office for additional residential hanger prices and availability 17
18 FINISHED HEX NUTS HEAVY HEX NUTS STANDARD ROUND WASHER LOCK WASHER, SPLIT FENDER WASHER, CS CARPENTER & PATERSON, INC. Nut E 165 SS304 Wgt. Box Size Plain ElectroG Type 304 Each Quantity 1/4" $1.19 $1.45 $ /16" /8" /2" Nut 165H 165H E 165H SS H SS316 Wgt. Box Size Plain ElectroG Type 304 Type 316 Each Quantity 1/4" $1.34 $1.61 $3.23 $ /16" /8" /2" Bolt/Rod Fig. 103 Fig. 103E Fig.103G 103 SS316 Wgt. Box Size Plain ElectroG HD Galv. Type 316 Each Quantity 1/4" $0.30 $0.37 P.O.A. $ /16" P.O.A /8" P.O.A /2" P.O.A Bolt/Rod E 176 SS Wgt. Box Size Plain Electro G Type 304 Each Quantity 1/4" $1.16 $1.23 $ /16" /8" /2" E 8 G Wgt. Box Size Plain ElectroG HD Galv. Each Quantity 1/4 x 1-1/4" $0.43 $0.54 P.O.A /8 x 1-1/2" P.O.A /2 x 2" P.O.A Call your local sales office for additional residential hanger prices and availability 18
19 ALL THREAD ROD Prices shown are list prices per foot E 94 SS SS316 Wgt. Standard Black / Electro- Stainless Stainless Per 6' Tube Rod Size Plain Galv. Type 304 Type 316 Ft. Quantity 1/4" $2.42 $3.63 $14.74 $ /16" /8" /2" HEX HEAD MACHINE BOLTS (Grade A) BLT BLT E BLT G BLT SS304 BLT SS316 Approx. Standard Plain / Electro Hot Dip Stainless Stainless Weight Carton Size Black Galv. Galv. Type 304 Type 316 Each Quantity 1/4 x 1" $0.23 $0.34 $0.57 $0.98 $ ,600 1/4 x 1-1/4" ,800 1/4 x 1-1/2" ,400 1/4 x 2" ,600 3/8 x 1" ,500 3/8 x 1-1/4" ,300 3/8 x 1-1/2" ,000 3/8 x 2" /2 x 1" /2 x 1-1/4" /2 x 1-1/2" /2 x 2" STEEL LAG ROD G Wgt. Box Plain Galv. Each Quantity 3/8" x 4" $7.76 $ x 6" x 8" x 10" x 12" /2" x 4" x 6" x 8" x 10" x 12" STEEL DRIVE SCREW 166 Wgt. Box Plain Each Quantity #12-1-1/2" $ #16-2" $ Call your local sales office for additional residential hanger prices and availability 19
20 STANDARD STEEL U-BOLTS CARPENTER & PATERSON, INC E Wgt. Box Pipe Size Plain Electro G Each Quantity 1/2" $4.79 $ /4" " /4" /2" " /2" " U-Bolts supplied 3-1/2" with 4 -nuts 4" TOGGLE BOLT WITH WING 59 E Wgt. Box Electro G Each Quantity 3/16" x 4" $ /16" x 5" /16" x 6" /4" x 4" /4" x 5" /4" x 6" /8" x 4" /8" x 5" /8" x 6" /2" x 4" /2" x 6" STEEL COACH SCREW E 107 G Wgt. Box Plain ElectroG HD Galv Each Quantity 1/4" X 1-1/2" /4" X 2" /4" X 2-1/2" /4" X 3" /8" X 1-1/2" /8" X 2" /8" X 2-1/2" /8" X 3" /2" X 1-1/2" /2" X 2" /2" X 2-1/2" /2" X 3" Call your local sales office for additional residential hanger prices and availability 20
21 DROP-IN CONCRETE ANCHORS CARPENTER & PATERSON, INC. CS Smooth 514 Wgt. Box Size CS-Zinc Each Quantity 1/4"-20 $ /8" /2" CS Lipped 514L Wgt. Box Size CS-Zinc Each Quantity 1/4"-20 $ /8" /2" SS Smooth 514 SS SS316 Wgt. Box Size Type 303 Type 316 Each Quantity 1/4"-20 $17.08 $ /8" /2" CS Mini DROP IN SETTING TOOLS 514S Wgt. Box Size CS-Zinc Each Quantity 3/8"-16 $ /2" Price each Setting Size Tool 1/4" $ /8" /2' Call your local sales office for additional residential hanger prices and availability 21
22 WVH WOOD VERTICAL HANGER Rod Unit Shank Shank Actual Wgt. Box Size Price Item Number Length Dia Pullout Box Quantity 1/4" $5.82 WVH1/4X2 2" 1/4" 1500#-Fir /8" 6.16 WVH3/8X1 1" 1/4" 1500#-Fir /8" 6.22 WVH3/8X2 2" 1/4" 1500#-Fir /8" 6.77 WVH3/8X2-1/2 2-1/2" 1/4" 2000#-Fir /8" 7.78 WVH3/8X3 3" 1/4" 2000#-Fir /8" 7.86 WVH3/8X4 4" 3/8" 2500#-Fir /2" 8.46 WVH1/2X2-1/2 2-1/2" 3/8" 2500#-Fir WSH WOOD SIDE HANGER Rod Unit Shank Shank Actual Wgt. Box Size Price Item Number Length Dia Pullout Box Quantity 1/4" $6.77 WSH1/4X1 2" 1/4" 1675#-Fir /8" 7.11 WSH3/8X1 1" 1/4" 875#-Fir /8" 7.24 WSH3/8X2 2" 1/4" 1675#-Fir /8" 9.07 WSH3/8X2-1/2 2-1/2" 3/8" 1675#-Fir CVH CONCRETE VERTICAL HANGER Rod Unit Shank Shank Actual Wgt. Box Size Price Item Number Length Dia Pullout Box Quantity 1/4" $5.82 CVH1/4X1-1/4 1-1/4" 1/4" N/A /8" 7.11 CVH3/8X1-1/2 1-1/2" 1/4" N/A /2" CVH1/2X2-3/4 2-3/4" 3/8" NA SVH STEEL VERTICAL HANGER Rod Unit Thickness Actual Wgt. Box Size Price Item Number Screw Description Range Pullout Box Quantity 1/4" $6.16 SVH1/4X1 1/4-20x1".036" -.188" 975#/16ga /8" 6.30 SVH3/*X1-1/2 1/4-20x2".036" -.188" 975#/16ga /8" 6.43 SVH3/8X2 1/4-20x1".036" -.188" 1675#/16ga /8" 6.63 SVHN3/8X1 1/4-20x1-1/2" w/nut.036" -.188" 975#/16ga /8" 8.67 SVHN3/8X1-1/2 1/4-20x1-1/2" w/nut.036" -.188" 1675#/16ga /4" 8.32 TVHN1/4X1-1/ x1-1/2 w/nut 3/16" - 1/2" 875#/16ga /8" 8.46 TVHN3/8X1-1/ x1-1/2" w/nut 3/16" - 1/2" 875#/16ga /2" 9.01 TVHN1/2X1-1/ x1-1/2" w/nut 3/16" - 1/2" 875#/16ga SSH STEEL SIDE HANGER Rod Unit Thickness Actual Wgt. Box Size Price Item Number Screw Description Range Pullout Box Quantity 1/4" $7.45 SSHN1/4X1 1/4-20x1".036" -.188" 975#/16ga /8" 7.65 SSHN3/8x1 1/4-20x1" w/nut.036" -.188" 1675#/16ga /8" 7.92 SSHN3/8X1-1/2 1/4-20x1-1/2" w/nut.036" -.188" 975#/16ga /8" 8.59 SSHN3/8X2 1/4-20x1-1/2" w/nut.036" -.188" 1675#/16ga /4" 9.01 TSHN1/4X1-1/ x1-1/2 w/nut 3/16" - 1/2" 875#/16ga /2" 9.41 TSHN3/8X1-1/ x1-1/2" w/nut 3/16" - 1/2" 875#/16ga Call your local sales office for additional residential hanger prices and availability 22
23 NUT DRIVER Rod Unit Catalog Size Price Model 1/4"-1/2" $69.58 NDI 1/4" ND2 3/8" ND3 1/2" ND4 Description Universal Steel & Wood Socket 1/4" Concrete Socket 3/8" Concrete Socket 1/2" Concrete Socket CARBIDE DRILL BITS Price each Carbide Size Drill Bit 5/32" X 6" $ /16" X 4" /16" X 6" /16" X 8" /16" X 10" /32" X /32" X 8" /32" X 10" /4" X 4" /4" X 6" /4" X 8" /4" X 11" /16" X 6" /8" X 6" /2" X 6" /8" X 8" /8" X 12" HAMMER SET ANCHOR Prices shown are per box HAS Drill Wgt. Box Size Anchors Size Box Quantity 3/16" X 7/8" $ /16" /4" X 3/4" /4" /4" X 1" /4" /4 X 1-1/4" /4" /4" X 1-1/2" /4" /4" X 2" /4" /4" X 3" /4" SELF DRILLING WALLBOARD ANCHOR Prices shown are per box Wall Wgt. Box Anchor Each Quantity EZ Zinc $ EZP Plastic Call your local sales office for additional residential hanger prices and availability 23
24 SPECIALS, SPECIALS AND MORE SPECIALS Our manufacturing facilities are equipped with a number of different machines for manufacturing special hangers. In addition, we have a substantial network of hanger suppliers, both domestic and international, which allows us to service all of your hanger needs. If you don't see what you are looking for in our abbreviated Residential Hanger Catalog, please call your nearest Carpenter & Paterson sales office for assistance. Additional Catalogs and Price Lists available Call your local sales office for additional residential hanger prices and availability 24
25 NOTES Call your local sales office for additional residential hanger prices and availability Blank
26 C&P RESIDENTIAL HANGERS CONTACT YOUR NEAREST CARPENTER & PATERSON LOCATION AT: SALES OFFICES AND MASSACHUSETTS NEW JERSEY (North) WAREHOUSES: 225 Merrimac Street 369 Jefferson Avenue Woburn, MA Saddle Brook, NJ Telephone: (781) Telephone: (973) Fax: (781) Fax: (973) MARYLAND NEW JERSEY (South) 8941 D'Arcy Road 3900 River Road Upper Marlboro, MD Pennsauken, NJ Telephone: (301) Telephone: (856) Fax: (301) Fax: (856) PENNSYLVANIA 484 Galiffa Drive Donora, PA Telephone: (724) Fax: (724) MANUFACTURING PLANTS: NEW JERSEY 369 Jefferson Avenue Saddle Brook, NJ Telephone: (973) Fax: (973) PENNSYLVANIA 484 Galiffa Drive Donora, PA Telephone: (724) Fax: (724) EXECUTIVE OFFICES CARPENTER & PATERSON, INC. 225 Merrimac Street, Woburn, MA Tel: (781) Fax: (781) CARPENTER & PATERSON, INC.,
AURORA BRAND Pipe Hangers
AURORA BRAND Pipe Hangers SCHEDULE: H-2017 EFFECTIVE: March 6 and Supports 2017 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151 North
More informationAURORA BRAND Pipe Hangers and Supports
AURORA BRAND Pipe Hangers and Supports SCHEDULE: H-2015-1 EFFECTIVE: November 15 2015 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151
More information$50.00 net All prices are each. Taxes extra as applicable Our plant, stocking warehouse.
AURORA BRAND Pipe Hangers SCHEDULE: H-2010 EFFECTIVE: 5-Apr and Supports 2010 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 1387 Cornwall
More informationModels 2230 and 2240
Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform
More informationWARRANTY REGISTRATION AND POLICY
WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationModels 2030 and 2040
Models 2030 and 2040 Overview... 2 Tools Needed... 2 Hardware... 2 Assembly... 3-8 Installation... 9 Operation... 9 Maintenance... 10 Accessories... 10 Limited Warranty... 10 Document # 101290 0607 Printed
More informationModels 2130 and 2140
Models 2130 and 2140 Overview... 2 Tools Needed... 2 Hardware... 2 Assembly... 3-10 Installation...11 Operation... 11 Maintenance... 12 Accessories...12 Limited Warranty... 12 Printed in USA 2007 Perform
More informationModels 2130 and 2140
Models 2130 and 2140 Overview... 2 Tools Needed... 2 Hardware... 2 Assembly... 3-10 Installation...11 Operation... 11 Maintenance... 12 Accessories...12 Limited Warranty... 12 Perform the following sequence
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationAM95 Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components: Maximum Flat Panel Weight: 95 lb. / 43.1 kg. M4 X 25mm M5 X 25mm M6 X 12mm (Qty 2) M6 X 25mm M8 X 25mm Allen Key Plastic Cover
More informationThe Balustrade Collection
The Balustrade Collection The Hartmann Sanders Balustrade Collection is designed for a Lifetime of Enjoyment. Whether it is a restoration or a classic addition, the Hartmann Sanders Balustrade Collection
More informationOwner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.
Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.
More informationGrounding and Utility Enclosure
Grounding and Utility Enclosure UE-1P UE-1P-INS Revision 1 DX Engineering 2006 P.O. Box 1491 Akron, OH 44309-1491 Phone: (800) 777-0703 Tech Support and International: (330) 572-3200 Fax: (330) 572-3279
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationModel 6360/6361. Ambulance Cot Fastener INSTALLATION/OPERATION INSTRUCTIONS. IMPORTANT Keep manual on file at all times.
IMPORTANT Keep manual on file at all times. Model 6360/6361 Ambulance Cot Fastener INSTALLATION/OPERATION INSTRUCTIONS For Parts or Technical Assistance 1 800 784 4336 Table of Contents Introduction..............................................................................
More informationSignal Isolation Module. Instruction Manual SIM
Signal Isolation Module Instruction Manual SIM200-000 Table of Contents 1. General Description... 3 2. Specifications... 3 2.1 Electrical... 3 2.2 Physical... 4 3. Installation... 4 3.1 Wiring Guidelines...
More information60 Meter Mono-Band Conversion Kit for the DXE-MBVE-5A Multi-Band Vertical Antenna
60 Meter Mono-Band Conversion Kit for the DXE-MBVE-5A Multi-Band Vertical Antenna DXE-MBVE-5A60MCK DXE-MBVE-5A60MCK-INS Revision 0a DX Engineering 2017 1200 Southeast Ave. - Tallmadge, OH 44278 USA Phone:
More informationFXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER #
ZOMEWORKS FXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER # 1 1011 Sawmill Road NW, PO Box 25805, Albuquerque, NM 87125 USA (505) 242-5354 / (800) 279-6342 / FAX (505) 243-5187 E-mail: zomework@zomeworks.com
More informationSolar Division. Product Catalog. Phone: Fax:
2013 Solar Division Product Catalog Phone: 800-743-6916 Fax: 800-689-7975 1 TERMS & CONDITIONS Terms & Conditions Pricing We make every effort to ensure that all the information contained within our price
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationAM500-U Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components Maximum Flat Panel Weight: 500 lb. / 226.79 kg. Wall Mount Bracket (Qty 2) Cross Bar 5/16 Flat Washers (Qty 6) Universal Spacers
More informationInstallation Manual Roof Zone Ladder Rack
Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32
More informationSingle Flex and Double Flex Couplings (i)
Single Flex and Double Flex Couplings (i) FORM NO. L00G00 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change
More informationPBM-UNI Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Warning Statements Warning Warning Warning THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR (4) TIMES THE WEIGHT OF THE PROJECTOR.
More informationPre-Filter. Brushless/ Sparkless Blower. HEPA Filter. Fluorescent Light
A Pre-Filter Brushless/ Sparkless Blower HEPA Filter Fluorescent Light B TO: Nayan Patel Central Drugs Compounding Pharmacy 520 W. La Habra Blvd. La Habra, CA 90631 QUOTATION DATE: QUOTATION NO: PHONE
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating
More informationSERIES M MIXER MASTS
SERIES M MIXER MASTS T AB L E O F C O N T E N T S V e n d o r D a t a Material Data Sheet 4-in. Mixer Mast Specification 3-in. Mixer Mast Specification 2 - in. M i x e r M a s t S p e c i f i c a t i o
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More information40 Meter Vertical Antenna
40 Meter Vertical Antenna COM-40VA COM-40VA-INS-Revision 1 COMTEK SYSTEMS 2016 1200 Southeast Ave. - Tallmadge, OH 44278 USA Phone: (800) 777-0703 Technical Support and International: (330) 572-3200 Fax:
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationINSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L. Introduction. Box Contents. Wall Mount Installations
INSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L Introduction Thank you for purchasing the Sonance Soundbar SB46 M or SB46 L. When properly installed your new Soundbar will give you years of entertainment
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...
More informationYGR-LO-8 GUARD RAILING YGR-TP18 & YGR-TP42 POSTS Installation Manual
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More informationInstall Instructions. NewAge Steel Welded Tall Locker
Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x
More informationDRIVEWAY SERIES D554 D560
DRIVEWAY SERIES D554 D560 Version ' Keep this instruction manual in case you have to contact the manufacturer for replacement parts. 2 FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR
More informationP4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels
Low-Profile Tilting Portrait Mount for Flat-Panels 1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: 175 lbs. Warning Statements THE WALL STRUCTURE MUST BE CAPABLE
More informationTERMS OF SALE. Quotations & Orders
Quotations & Orders 1. Quotation is in USD unless otherwise indicated and is based on information provided to SolarPath Inc. at time of quotation, i.e. location, application, operating profile, etc., and
More information110A SERIES REGENERATIVE TURBINE PUMPS REPAIR PARTS INDEX
110A SERIES REGENERATIVE TURBINE PUMPS REPAIR PARTS INDEX NOTE! Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # A-03-206 03/24/15
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationFull Height Ladder Safety Gate
Full Height Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models Powder Coat Yellow (PCY) 304 Stainless Steel (SS) Hot Dipped Galvanized (GAL) Table of Contents Product
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS CTM-MS1 Flat Panel Display Mount (26 to 37 ) NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations
More informationth St N Oak Park Heights, MN Phone: Fax:
12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 #4 BENDER BREAKDOWN AND PARTS LIST PG. 4-6 QUIK-LOK BREAKDOWN
More informationElco Construction Products 1301 Kerr Drive Decorah, IA fax:
Technical Manual 2010 HangerMate anchors were designed to speed installation of fire sprinkler, HVAC, refrigeration, general piping, and electrical systems. They can also be used to install strut channels,
More informationThe Saddle Rack. For Power And Communication Cables
The Saddle Rack For Power And Communication Cables Underground Devices SADDLE RACKS: Low Cost, But Tough and Non-Corrosive For Temporary Support or Permanent Installation For Use in Manholes, Handholes,
More informationMODEL NO. U412 UNIVERSAL BOX AND PAN BRAKE OPERATION, PARTS & MAINTENANCE MANUAL
MODEL NO. U412 UNIVERSAL BOX AND PAN BRAKE OPERATION, PARTS & MAINTENANCE MANUAL Model: Serial #: Purchased From: Date Received: MADE IN THE USA Distributed by: Trick-Tools 80 Truman Road Pella, IA 50219
More informationInstallation Manual XRL Solar Rail System
Installation Manual XRL Solar Rail System Solar Mounting Solutions June 2009 www.ironridge.com 2009 IronRidge, Inc. All Rights Reserved Version 1.0 2 XRL Solar Rail System Installation Guide Introduction
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS PDS-PLUS Universal Projector Mount Model: NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationPRC-LA Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: Warning Statements 50 lbs. THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR TIMES THE WEIGHT OF
More informationGrounding and Utility Enclosure
Grounding and Utility Enclosure DXE-UE-2P DXE-UE-2P-INS Rev 1f DX Engineering 2017 1200 Southeast Ave. - Tallmadge, OH 44278 USA Phone: (800) 777-0703 Tech Support and International: (330) 572-3200 Fax:
More informationInstallation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com
Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-5 to LSG-48 Table of Contents Product Information...2 Inspection & Mainteance...2 Warranty Information...2
More informationADJUSTABLE MOUNTING POST
C Part Number 069 B EACH CARTON CONTAINS D Floor Mounting Kit A. Bottom Post Assembly B. Top Post Assembly C. Flange Head Bolts (x2) D. Floor Mounting Kit. 5/8 Wx/6 Hx0 L framing channels (x2) 2. /8-6x4
More informationTHANK YOU FOR PURCHASING OUR STUDIO RTA CREATION STATION
THANK YOU FOR PURCHASING OUR STUDIO RTA MODEL# 20672 IF YOU REQUIRE ANY ASSISTANCE WITH ASSEMBLY, PARTS, OR INFORMATION ON OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE: www.studiorta.com OR CALL OR WRITE THE
More informationGypsy Statement of Limited Warranty. Part 1 General Terms
Gypsy Statement of Limited Warranty Part 1 General Terms This Statement of Limited Warranty includes Part 1 General Terms, and Part2 Warranty Information. The warranties provided by PROVO CRAFT AND NOVELTY,
More informationSingle-Sliding Header Mount INSTALLATION INSTRUCTIONS
1-800-701-4782 Single-Sliding Header Mount INSTALLATION INSTRUCTIONS GATEWAY SO# OPENING SIZE: W x H PULLEY SYSTEM: YES / NO Upon receiving your Gateway Door, inspect packaging and contents for freight
More informationInstallation Instructions
Installation Instructions Sure Step (Part # DN260-S4B/ DN260-S4S Part # DN270-S4B/ DN270-S4S) 2009-2010 Dodge Ram1500 Crew Cab & Quad Cab 2010 Ram 2500/3500 Crew Cab For Technical Support/Warranty Information
More informationLoading Dock Safety Gate
Installation Instructions/Operation and Maintenance Manual Models LDSG-120-PCY LDSG-144-PCY Table of Contents Product Information...2 Parts List...3 Installation Instructions...5 Operation...13 Inspection
More information00108/00110 INSTRUCTION MANUAL
00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Please Read this Instruction Booklet prior to assembly of your Rock Tamer Kit. IMPORTANT! Exhaust Systems Note: Any modifications
More informationModel 72D Twin Blade Rotary Wire Stripper
110 Fairgrounds Drive P.O. Box 188 Manlius, NY 13104-0188 USA 315.682.9176 FAX: 315.682.9160 OPERATOR S MANUAL Model 72D Twin Blade Rotary Wire Stripper PRODUCTION WIRE PROCESSING EQUIPMENT Website: www.carpentermfg.com
More informationVAN STORAGE SOLUTIONS FOR THE WAY YOU WORK
WWW.WEATHERGUARD.COM VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK Weather Guard / KNAACK 420 E. Terra Cotta Ave. Crystal Lake, IL 60014 USA 800-456-7865 (Toll Free) 800-334-2981 (Fax) Knaack.OrderEntry@wernerco,.com
More informationorientation Conergy SunTop Instructions for professional installation
On-roof Framed modules Portrait orientation Landscape Three-tab Shingle Plain tile Slate Double Roman tile Metal roof Material warranty orientation Conergy SunTop Instructions for professional installation
More informationGB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler
Ceiling Equipment Storage Box with Pipe Coupler INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9534-500-021-00 Contents Weight Limit... 2 Warning Statements... 2 Installation Tools...
More informationBASE & WALL CABINET SETUP GUIDE BY SUNSTONE
BASE & WALL CABINET SETUP GUIDE BY SUNSTONE Read all instructions before you install cabinet. Very important to follow each step in order as detailed in this Instruction Guide!!! To installer or person
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:
More informationLC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60
More informationHardware Box 1 1/4 Diameter x 3/4 Long Bolts 24 1/4 Nylon Lock Nut 24 1/4 Diameter x 3 Long Lag Bolt 8 1/4 Washers 56
Warning: Excessive weight hazard! Use two or more people to move, assemble or install overhead rack to avoid back or other injury. Do not leave children unattended near overhead rack. High risk of injury
More informationBASEBOARD TRADE PRICE SCHEDULE
BASEBOARD TRADE PRICE SCHEDULE IN U.S.A. CURRENCY Warming America s Homes Effective October 1, 2016 Thermogenic Division PRICING INFORMATION Minimum Invoice: $100.00 per order plus delivery costs on all
More informationSecurity Products & Services...That Never Sleep. Sur-Lock. I/O 2000L Family of Exit Control Alarm Locks. Installation Instructions
Security Products & Services...That Never Sleep Sur-Lock I/O 2000L Family of Exit Control Alarm Locks Installation Instructions IMPORTANT It is important that you read and follow these instructions carefully.
More informationth St N Oak Park Heights, MN Phone: Fax:
12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 SET-UP PROCEDURE PG. 4 REMOVING
More informationWorktop INDEX eight Capacity Unpacking
Pro.0 Series Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of
More informationFP-4855 Flat Panel Television Stand ASSEMBLY INSTRUCTIONS
FP-4855 Flat Panel Television Stand ASSEMBLY INSTRUCTIONS Patent Pending Italian Designed A Product of China Do not discard these instructions M-1_051607v3 Bell O International Corp. will not be responsible
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationAssembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #1002493 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C3 02/2014 www.jettools.com
More informationRITE-HITE RAINGUARD TM
RITE-HITE RAINGUARD TM RG-3000 Trailer Top Seal Installation Instructions & Owner s Manual Date of Installation: This Manual Covers All Units Shipped 8/04 to Date PRINTED IN U.S.A. PUBLICATION NO. RG30-0010
More informationLC200WT Security Wall Mount with Tilt for up to 32" Flat Screens
Page 1 of 6 The LC200WT Security Wall Mount with Tilt is designed to secure up to a 32" flat panel monitor to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front
More informationASSEMBLY INSTRUCTIONS
AVSC-2123 Audio Video System ASSEMBLY INSTRUCTIONS PATENT PENDING FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS:! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED
More informationInstallation Instructions. Monitor Roll Stand
Installation Instructions Monitor Roll Stand w w w. a m i c o. c o m Preface Important, Please Read Carefully Thank you for your purchase with Amico. This unit is designed for long lasting performance,
More informationMaster Reference Unit
Master Reference Unit Instruction Manual Model D10096-000 Driven by Excellence D.C. DRIVES, A.C. INVERTERS, SOLID STATE STARTERS, SYSTEM INTERFACE CIRCUITS AND ENGINEERED SYSTEMS Driven by Excellence D.C.
More informationOperating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table
Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright
More informationPATRIOT DOCKS ASSEMBLY INSTRUCTIONS
6/1/2008 PATRIOT DOCKS ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical shoreline application.
More informationLC6X4WTM Security Wall Mount with Tilt for up to 60" Flat Screens with VESA 600mm x 400mm or less
Page 1 of 6 The LC6X4WTM Security Wall Mount with Tilt is designed to secure a flat screen, up to a 60", to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front of
More informationTilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040
Tilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040 20-40 66 lbs. Supports VESA sizes up to: 200x200 For technical assistance or troubleshooting please call 1-855-994-2825 or visit
More informationRecord the serial number and date of purchase in your manual for future reference.
10 Woodworking Bandsaw Model: 10-305 Parts List Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: Part # 10-305PL1 For more information:
More informationOWNER S MANUAL STORAGE SHED MODELS: STOR-96-G-W-1RH & STOR-912-G-W-1RH
STORAGE SHED MODELS: STOR-96-G-W-1RH & STOR-912-G-W-1RH OWNER S MANUAL Introduction.. 1 Assembly Instructions STOR-96-G-W-1RH... 2 Assembly Instructions STOR-912-G-W-1RH... 8 STOR-96-G-W-1RH Exploded Parts
More informationPan & BoxBrake Vise Attachment. Item no:
Pan & BoxBrake Vise Attachment Item no:9629611 Technical data max. material width 320 mm/12.5" Weight 10 kg/22 Ibs. Sheet thickness 2.5 mm Abkantleistung max. bei 90 max. folding capacity at 90 Aluminium
More informationSpecifications. Important Safety Information
Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm for 37 to 47 Flat Panels Model: AM80 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationTelescopic Screw Gun Bracket & Accessories
Telescopic Screw Gun Bracket & Accessories TSGB Features and Benefits: Fast and easy installation Allows attachment from the front or inside of the stud in any depth Improved design with stamped inch markings
More informationINSTRUCTION MANUAL. Specifications Mechanical. 1 5/8 to 2 1/16 O.D. (41mm to 52mm)
308 Industrial Park Road Starkville, MS 39759 USA Ph: (662) 323-9538 FAX: (662) 323- General Description Model VB-25FM 2-Meter 5 Elements Beam INSTRUCTION MANUAL This antenna is a 5-element, 2-meter beam
More informationPlanishing hammer stand For use with SKU Planishing hammer
Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,
More informationBox Edge Plus Steel Shelving Installation Instructions
Box Edge Plus Steel Shelving Installation Instructions IMPORTANT PRODUCT LIABILITY INFORMATION Read all instructions before proceeding with installation or shelf loading. Vital product information pertaining
More informationCostco High Wire Assembly Instruc ons & Owner's Manual
2254 Costco High Wire Assembly Instruc ons & Owner's Manual Important! Read this manual completely through before assembly and use. Consumer assistance Toll free If you need to order replacement parts
More informationWorktop. Weight Capacity. 100 lbs. 21 Corner Worktop. 48 Worktop. Fits over 2 Cabinets. 72 Worktop. Fits over 3 Cabinets. 200 lbs. 150 lbs.
Bold.0 Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping
More informationALEX. Assembly Instructions. PARTS - Supplied with Armless, Left and Right-End Chairs. Thank you for your purchase.
ALEX Assembly Instructions Thank you for your purchase. Unpack all content and check to ensure that all of the parts are in proper condition. To help protect the environment, use the appropriate recycling
More informationATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION) Installing your Transit bulkhead is very clear cut following these instructions. Before cutting or drilling in the floor, verify the location of you gas tank,
More informationCT Box and Pan Brake User Manual
CT153 12 Box and Pan Brake User Manual Important Safety Precautions Plead read all the instructions before using this tool. 1) Always keep your work area clean. Cluttered areas invite injuries. 2) Do not
More informationAssembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013
More informationPEXTO NO. 137 & NO. 152 FOOT SQUARING SHEAR INSTRUCTIONS AND PARTS IDENTIFICATION
PEXTO NO. 137 & NO. 152 FOOT SQUARING SHEAR INSTRUCTIONS AND PARTS IDENTIFICATION INSTRUCTIONS FOR ADJUSTING PEXTO FOOT SHEARS -- BEFORE OPERATING -- Remove Shears From Skids and Log in Place 1. This shear
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More information