NEW PRODUC T BULLE TIN RADIO PARTS GROUP

Transcription

1 CARBON MONOXIDE METER The CO110 carbon monoxide meter detects the presence of carbon monoxide (co) and measures concentrations between parts per million (ppm) CO The meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO PPM RANGE BEEP ABOVE 200 Digital LCD display Auto/manual zero Memory for 10 complete data sets Record mode Red & Blue LED light and audible alarm (>90dB) High accuracy, quick response High quality sensor Pocket size and easy to use Fast sampling Max hold Data hold Above 200 PPM, the beeper sounds continuously Operating temperature: 0 ºC to 50 ºC Storage temperature: -30 ºC to 60 ºC Operating humidity:0-90% relative humidity (non-condensing) Measurement range:0 to 1000PPM Measurement resolution:1ppm Accuracy: ±5% or ±10PPM Warm up period: Less than 2 seconds Battery: 9V, NEDA 1604A or equivalent Sensor type: Stabilized electrochemical Gas-specific (CO) Typical sensor life: 3 years Size (HxWxD): 102mm x 52mm x 29mm Weight: 84g

2 POCKET INFRARED THERMOMETER Compact design pocket IR thermometer with laser pointer to identify target area IR77L This non-contact thermometer is designed to check all types of A/C and heating systems to monitor performance of appliances such as refrigerator, dishwasher, freezer and oven. Ensure proper cooking, grilling and storage temperatures. Built-in laser pointer identifies target area 6:1 distance to Spot size ratio Fixed emissivity 0.95 covers 90% of surface applications C or F selectable Data hold Overrange indication Auto Power Off Low battery indication Range: -30 C to270 C / -22 F to 518 F Response time: Less than 1 second Resolution: 1 C / F Basic Accuracy: ± 2% or ±2 C/±4 F Optical resolution: 6:1 Emissivity: Fixed at 0.95 Battery: 1.5V AAA battery x 2 Size (H x W x D): 97mm x 56mm x 29mm Weight: 81g

3 PROFESSIONAL CABLE LOCATOR This professional general purpose cable lacator is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuits in cables and electrical floor heating systems. LA The LA1012 Cable Tracer can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose made carry case. The receiver also incorporates a torch function for working in dim light location. Note: The probe supplied in the box is not suitable for Australian power sockets, if you want to test the power point, please use our 4mm plug test lead, which is 03020TL, code number For all applications (live or dead cable) without additional instruments Set includes a transmitter and a receiver Proven digitally coded sender signal guarantees clear signal identification Transmitter with LCD-display for transmitting level, transmitting code and external voltage Receiver with back light LCD display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity Acoustical receiving signal switchable Auto power off Additional torch lamp function for working in dark environment Voltage measurement range: Transmitter: 12V, 50V, 120V, 230V, 400V Frequency range: Transmitter: Hz Output signal: Transmitter: 125kHz Voltage: Transmitter: up to 400V AC/DC Tracing depth cable location: Receiver: m wall/underground cables Main voltage detection: Receiver: m Environment Operating temperature: Transmitter: 0 to 40 C,Receiver: 0 to 40 C Storage temperature: Transmitter: -20 C to 60 C, Receiver: -20 C to 60 C Humidity (without condensation: Transmitter: Max. 80% relative, Receiver: Max. 80% relative Operating Altitude: Transmitter up to 2000m, receiver up to 2000m Safety Electrical safety: EN Overvoltage category: CAT III 300V Size ( Hx Wx D): 190mm x 60mm x 37mm Weight: 229g Includes durable carry case and accessories

4 PROFESSIONAL LASER DISTANCE METER LDM100 is designed to give the users a high accuracy, one-person distance measuring and estimating tool to measure remote and difficult to reach places. LDM This laser distance meter is the most advanced in laser measuring devices with a built in tilt sensor for indirect height measuring and vertical angle measurements. It is designed for indoor professional using. LDM100 has new tilt sensor not only indicates vertical angle measurements, but also can obtain real horizontal distances when the target is obstructed, and perform variousindirect height measurements. Angle, slope and pitch can be measured simply by placing the body of the laser distance meter on the slope itself or aligning it at the desired angle. Area, volume calculations Indirect measurement using Pythagoras Addition/subtraction Continuous measurement Min/max distance tracking 3 Axis accelerometer digital angle finder Auto horizontal distance Display illumination and multi-line display Buzzer indication Multifunctional end pieces Angle measurement using axis accelerometer Measuring range: 0.05 to 50m (2in up to 164ft) Measuring accuracy: ±1.5mm (±0.06in) Measuring unit: m, in, ft Laser class: class 2, 635nm, <1mW Dust protect/splash proof: IP54 History measurement recodes: 20 Keyboard type: super soft-touch ( long life) over 1 million times Operating temperature: 0ºC to 40ºC ( 32ºF to 104ºF) Storage temperature: -10ºC to 60ºC ( 14ºF to 140ºF) Battery life: up to 5,000 measurements Battery type: 2 x 1.5V AAA Auto laser switch off: after 0.5 min Auto instrument switch off: after 3 min Angle measurement range: ±90º Accuracy to laser beam: ±0.5º Accuracy to laser housing: ±.0.5º Size (HxWxD): 110mm x 45mm x 27mm Weight: 135g ±1.5MM accuracy up to 50 meters!

5 ELECTRON CLINICAL THERMOMETER ST137 measures body temperature and offers a safe, accurate and quick temperature readings. ST Oral, rectal or auxillary modes available Size (H x W x D): 155mm x 33mm x 55mm Weight: 84g Temperature unit: C / F Body Temperature Range: 32 C ~ 42.9 C /95 F ~ 109 F Wide Temperature Range: 0.0 C ~ C /32.0 F ~ F Basic Accuracy: 35.5 C ~ 42 C ±0.2 C/0.4 F Resolution: 0.1 C/0.1 F Response time: 10s Operating environment: 5 C ~ 40 C (41 F ~ 104 F) / 15~95%RH Battery: 3V Button battery

6 TEMPERATURE & HUMIDITY DATALOGGER The ST172 is used to monitor temperature and humidity values efficiently and conveniently for long periods of time by using the datalogger functionality. ST The dataloggers are saved in the logger and simply read out by your PC with USB interface. The LCD showscurrent readings, MAX, MIN and sign of alarm. Memory for readings Free selectable measurement cycle from 2 sec. to 24hr. Battery life: more than 3 years Display all status information through two LEDs Download collected data through USB interface Alarm display if user-defined maximum/minimum values exceed Analysis software used to view graph for logging data Measurement range: 0 to 100%RH, -40 to 70ºC Accuracy: ±2%RH, ±1ºC Resolution: 0.1%RH, 0.1 ºC Memory: 32000(16000 each for temperature and humidity) Measuring rate: 2 sec. to 24 hrs Battery life: typically 3 years Analysis software: Windows 98/2000/XP/Vista Size (HxWxD): 94mm x 50mm x 32mm Weight: 91g

7 PEN TYPE DIGITAL MULTIMETER Compact and ergonomically designed pen type digital multimeter featuring a large LCD display with bar graph. ST functions Pen-type Digital multimeters Large 3-¾ digital LCD display with Bargraph Full function indication Diode and audible continuity Function Max Range Basic Accuracy Voltage DC 600V ±0.8% Voltage AC 600V ±1.2% Current DC ±1.5% 200mA Current AC ±2.0% 200mA Resistance ±3.0% 20MΩ Non-contact voltage: V Continuity : <35Ω Diode Test : Test voltage max. 3.4V Size (H x W x D): 230mm x 35mm x 20mm Weight: 215g

8 MINI AC/ DC CLAMP METER The ST337 is designed to verify the presence of load current, voltage and resistance etc. The small body and jaw fits perfectly and the large backlit display is designed to be easy to read. ST Jaw opens to 0.5 1mA high resolution Digital clamp tester for AC/DC current measurement Providing wide measuring range from very small and large current Designed to safety standard IEC : CAT III, 600V and pollution degree 2 Data hold and Max hold function Dynamic range 0f 4000 counts full scale Auto power off Function Max Range Min Resolution Basic Accuracy Current AC 4A, 200A 1mA ±(2.5%+5d) Current DC 4A, 400A 1mA ±(2.5%+4d) Voltage AC 400mV~600V 0.1mV ±(2.0%+4d) Voltage DC 400mV~600V 0.1mV ±(1.5%+3d) Resistance 400Ω~40MΩ 0.1Ω ±(1.5%+2d) Frequency 5Hz~10MHz 0.001Hz ±(1.2%+3d) % Duty 5%~99.9% 0.1% ±(1.2%+3d) Diode Check Test currentof 0.3mA, Open circuit voltage 1.5V Continuity Check Size (H x W x D): Weight: Threshold 50Ω, continuity beeper 2.7kHz 210 x 70 x 37 mm 200g

9 6-in-1 digital multimeter PluS environment measurement tool ST61 is a 6- in-1 digital multimeter with Environment measurement. It has been designed to combine the functions of sound level meter, light meter, humidity meter, temperature meter & non-contact AC voltage detector. ST The sound level function can be used to measure noise in factories, schools, offices, home, etc., checking acoustics of studios, auditoriums and hi-fi installations. The light meter function is used to measure illuminance in the filed. It is fully cosine corrected for the angular incidence of light. The light sensitive component used in the meter is a very stable, long life silicon ciode. The humidity/temperature uses a humidity/ semiconductor sensor and K type thermocouple. The DMM function includes ACV, DCV, ACA, DCA Resistance, Capacitance, Frequency, Duty Cycle, Diode, Continuity test and Non-contact AC voltage detector. 6 in 1 multifunction multimeter, including DMM, sound level meter, light meter, humidity meter, tempearture meter and Noncontact AC voltage detector Safety design meets CAT IV 600V and CAT III 1000V Infrared probe for non-contact temperature measurement Double molded housing 4000 counts digital LCD display with back light Auto ranging Data hold and relative function Auto power off Function Max Range Max. resolution Basic Accuracy Light 20,000 Lux 0.1 Lux ±5%±10d 40,000 Lux Sound 100dB 0.1dB ±3.5dB Humidity 95% RH 0.1% RH ±3.5% RH Temperature -20 ~ 750 C 0.1 up to 400, 1 over 400 ±3%±3 C -4 ~ 1400 F 0.1 up to 400, 1 over 400 ±3%±5 F ncv V Voltage DC 600V 0.1mV ±5%±2d Voltage AC 600V 0.1mV ±1.2%±10d Current DC 10A 0.1uA ±1.0%±2d Current AC 10A 0.1uA ±1.0%±2d Resistance 40MΩ 0.1Ω ±0.8%±2d capacitance 100uF 0.01nF ±3.5% Frequency 100Mhz 0.001Hz ±1.5% Duty cycle 99.90% 0.10% ±1.2% Diode check Open voltage 2.8VDC, test current 1mA Continuity test Threshold 30Ω Size (H x W x D): 170mm x 79mm x 50mm Weight: 342g

10 MINI sound level meter The ST85A is a compact sound level meter that has a wide dynamic range from 30 to 130dB. ST85A A wide dB range Latest design housing High performance Auto LCD back light MAX & MIN hold function Frequency weighting A (85A) Low cost Level range: 35~100dB Accuracy: ±3dB (ref 1kHz) Frequency range: 31.5HZ ~ 8kHZ Frequency weighting: A Battery type: 9V battery (included) NEDA 1604, IEC 6F22, JIS 006P Operating temperature: 0 ºC~40 ºC (<80%R. H.) Storage temperature: -10 ºC~60 ºC (<70%R. H.) Size (HxWxD): 128mm x 51mm x 32mm Weight: 131g Accessories: 9V battery (included)

11 Non-contact Body InfraRed Thermometer Reads body temperature instantly and without contact, making the ST8806 ideal for new born babies and young children. Non-contact also means no need to disinfect or change the tip after each use. ST Very simple to use, it reads the body temperature instantly and without contact. Thermoflash is particulary efficient for taking the temperature of newborn babies and very young children. From a distance of around 5cm, all you have to do is pointi the ST8806 towards the forehead to read the temperature shown on the LCD screen. As there is no contact, you can immediately start again and again and as many times as you wish to take the temperature of the other family members without having to disinfect or change the tip. User Selectable C or F & forehead heat detection Select Body and Surface temperature Set alarm value and sound alarm Memorization of the last 32 measurements Automatic Data Hold & Auto power off Automatic selection range and Display Resolution (0.1 C(0.1 F) Backlight LCD display Body Temp. Range 30 C ~ 42.5 C / 86 F ~ 109 F Surface Temp. Range Resolution Basic Accuracy Measuring distance Response time Over range indication Emmissivity Spectral responce Power off Operating Temp. Storage Temp. Relative humidity Size (H x W x D): Weight: 0 C to 60 C (32 F to 140 F) 0.1 C/0.1 F ±0.3 C at 30 C~40 C/86 F~104 F Range Body temp.: 5-15cm (Surface temp: 8:1 Distance to Spot size) 0.5 second LCD will show Hi / Lo 0.95 fixed value 6~14um Automatic shut off after7 seconds, approx. 0 C to 50 C (32 F to 122 F) -20 C to 60 C (-4 F to 140 F) 10%~90% RH operating, <80% RH storage 146mm x 104mm x 43mm 163g

12 Professional Light Meter The ST8809A light meter provides accurate light level measurements in terms of Foot Candles (FC) or LUX over a wide range ST8809A Just turning the function switch to select the lux scale and setting the range to desired range, then moving the photo detector to the light source in a horizontal position and reading the illuminance norminal from the LCD display. When the measurement is completed, remove the photo detector from the light source. Over range indication Long life silicon photo diode inside Measurement rate: 1.5 times per second Wide range to 40,000FC/400,000 lux LCD display counts: 4000 Auto ranging Analog bargraph/segments: 41 segments Peak hold Relative mode Max and Min hold Auto power off Low battery indication User selectable FC/Lux Output: USB Capacity for data logging 99 Total accuracy: for C.I.E standard illuminate A (2856K) Max range: 400,000 Lux Accuracy: ±5% ±10d (<10,000Lux); ±10% ±10d (>10,000Lux) Max resolution: 0.1Lux/0.01Fc Measuring rate: 1.5 times/second Photo detector: 115mm x 60mm x 27mm Size (HxWxD): 203mm x 75mm x 50mm Weight: 280g Accessories: 9V battery USB A to mini USB B cable Software CD Carry case

13 professional sound level meter ST8851 Sound Level meter can be used to measure noise in factories, schools, offices, traffic access and household etc, checking acoustics of studios, auditoriums and Hi-Lo installations ST Designed for noise project, quality control, illness prevention & cure and all kinds of environmental sounds measurements. The 30 to 130dB range makes this meter ideal for all general purpose sound level measurements. An incredible 30 to 130dB range Confirms to IEC class 2 for sound level meters MAX & MIN measurements Over range display Under range display A & C weighting Fast & slow response Analog AC/DC outputs for connection to frequency analyzer or X-Y shaft recorder Datalogger function Adjustable alarm levels Memory for readings Standard applied: IEC type 2, ANSI S1.4 type 2 Accuracy: ±1.4dB Frequency range: 31.5HZ ~ 8kHZ Dynamic range: 50dB Level ranges: Lo(Low): 30dB ~ 80dB; Med: 50dB~100dB; Hi(High): 80dB ~ 130dB, Auto: 30dB~130dB Time weighting: Fast (125ms), Slow (1s) Microphone: 1/2 inch electret condenser microphone Resolution: 0.1dB Display update: 2 times/sec Analog output: AC/DC outputs, AC=1 Vrms, DC=10mV/dB Size (HxWxD): 278mm x 76mm x 50mm Weight: 350g Accessories Heavy duty carry case 9V Battery USB A to mini-b lead Mini tripod

14 2X POLE VOLTAGE TESTER ST Double molded plastic housing Overvoltage class CAT III 1000V/CAT IV 600V Bright flashlight 1999 counts LCD display with analog bargraph AC/DC voltage detection Polarity detection Continuity test Rotary field indication Low impedance test IP64 VAT self test button Voltage range: 12, 24, 36, 50, 120, 230, 400, 690V Tolerance: ±1.5%±3d ACV frequency range: 50/60Hz Internal impedance: 1MΩ Size:(HxWxD): 240mm x 78mm x 40mm Weight: 237g

15 TRUE RMS WATERPROOF DIGITAL MULTIMETER The ST9927T sets a new benchmark and standard in true RMS multimeters with a combination of precision, features, ease-of-use, safety and reliability. ST9927T DUST & WATERPROOF IP67 True RMS AC Voltage and Current readings MAX-MIN recording. Safety Conformance EN CAT IV 600V, CAT III 1000V 1000V input protection on all ranges 10A/1000V & 0.5A/1000V fuses protection on currentranges Digital Display counts: 6000 True RMS measurements Analog bargraph/segment: 61-segment Safety design Relative mode Data Hold MAX/MIN recording mode Auto Ranging Auto Power Off Wide capacitance range: 1000uF Function Max Range Basic Accuracy Voltage DC 1000V ±0.5% Voltage AC 1000V ±0.8% Current DC 10A ±1.2% Current AC 10A ±1.8% Resistance 60MΩ ±0.8% Temperature 760 C/1400 F ±3.0% Duty Cycle 99.9% ±1.2% Frequency 10MHz ±1.5% Capacitance 1000uF ±3.0% Size (H x W x D): 182mm x 82mm x 55mm Weight: 360g IP67: Dust and water proof

16 TYRE PRESSURE GAUGE The TP5 allows for quick and accurate reading of tyre pressure in a stylish and compact housing. TP PST White LED light tip helps to find the tire stem easily Much easier use than conventional air gauges Yellow push button turns on/off and units selected Measures tire pressures of 5 to 100 pounds per square inch (PSI) Easy to use Press yellow push button turns on, LCD display 0.0 PSI Take the tyre gauge spiracle at the tyre stem, then the tyre gauge will memorize the maximal pressure value Press yellow push button to select the different units, takes turns as PSI Kpa bar Press yellow push button 5s to turn off the tyre gauge Range: 5-100PST Accuracy: ±(1%+0.5) PSI Size (HxWxD): 156mm x 42mm x 20mm Weight: 77g