AEMC Megohmmeters. AEMC Flexible Current Probe

Transcription

1 AEMC Megohmmeters T EST E QUIPMENT V Digital/Analog Megohmmeter Models 1050 & 1060 True Megohmmeter Test voltage combinations of 50V, 100V, 250V, 500V and V Insulation measurements to 4000GΩ (4TΩ) Direct measurement of DAR and PI values Direct measurement of sample Capacitance Display of test voltage and run time Programmable test run times and PI times Smooth and Alarm functions Automatic test inhibition (if live sample >25V) Automatic discharge after use with voltage display Large dual display with time, voltage and measurement 1060 Bright blue electrolumenescent backlight Battery powered (Model 1050) Auto power-down when not in use Remote operation with optional test probe Rugged dual wall field case with detachable lead/accessory pouch EN , 600V Cat III, IEC and CE rated Model 1060 includes the following additional features: AC rechargeable NiMH batteries RS-232 interface for direct printing of results (serial output) 128k memory to store measurements in specific files Remote operation of megohmmeter through PC Includes DataView software to configure instrument and generate reports AEMC Flexible Current Probe " flexible sensor fits around conductors up to 7.6" in diameter Reads Amps directly on DMM or Scope mv output directly proportional to AC current (10mV/A on 300A range and 1mV/A on 3000A range) Accuracy 1% of Reading ± 500mA 4% influence of conductor position in jaw 300 hour battery life EN 61010, V Cat. III AE/ AE/ True Megohmmeter Test voltage combinations of 500V, V, 2500V and 5000V Insulation measurements from 30kΩ to 10,000GΩ (10TΩ) Selectable and programmable test voltage (40 to 5100V) Automatic calculation of DAR, PI and DD ratios Direct measurement and display of Capacitance and Leakage Current Display resistance, test voltage and run time Programmable test run times and PI ratio times Smooth and Alarm functions Automatic test inhibition (if live sample >25V) Automatic discharge and display of discharge voltage Large dual display with time, voltage and measurements shown (Models 5050 and 5060) Graphic and digital display of test voltage, resistance and more (Model 5070) Bright blue electroluminescent backlight Programmable test voltage lock-out Programmable alarm setting Auto power-down when not in use AC or DC powered with rechargeable NiMH batteries Rugged, weatherproof field case Designed and built to IEC safety standards EN , V Cat. III DataView is included with the Models 1060, 5060 and 5070 AE/ Megohmmeter Model 1050 (Digital, with Analog Bargraph, Backlight, Alarm, Timer, 50V, 100V, 250V, 500V, V, AE/ AE/ AE/ AE/ V Digital/Analog Megohmmeter Models 5050, 5060 & DataView Software for Models 1060, 5060 & 5070 Configure all functions and run tests from your PC Retrieve and display data in real time Retrieve data from memory in real time Display plots & print reports Auto DAR/PI, Res., Continuity) Megohmmeter Model 1060 (Digital, with Analog Bargraph, Alarm, Timer, 50V, 100V, 250V, 500V, V, Auto DAR/PI, Res., Continuity, RS-232 with DataView software, 128kB Memory) Megohmmeter Model 5050 (Digital, with Analog Bargraph, Backlight, Alarm, Timer, 500V, V, 2500V, 5000V, Auto DAR/PI/DD) Megohmmeter Model 5060 (Digital, with Analog Bargraph, Backlight, Alarm, Timer, 500V, V, 2500V, 5000V, Auto DAR/PI/DD, RS-232 w/dataview software) Megohmmeter Model 5070 (Graphical, Analog Bargraph, Backlight, Alarm, Timer, 500V, V, 2500V, 5000V, Ramp, Auto DAR/PI/DD, RS-232 w/dataview software) FlexProbe Model (300/3000A, 24", 10mV/A/1mV/A, with lead) Banana (Female) BNC (Male) Adapter (XM-BB) for use with scopes 157

2 MIT515, MIT525, MIT1025, MIT1525 MIT515, MIT525, MIT1025, MIT TΩ maximum resistance PI, DAR, DD, SV and ramp test Operate from battery or AC source Rapid charge Li-ion battery Safety rated CATIV V to 3000 m (1) Advanced memory with time/date stamp DESCRIPTION Megger s new range of DC insulation testers MIT515, MIT525, MIT1025 and MIT1525 are targeted at original equipment manufacturers and industrial companies. The top of the range MIT1525 performs insulation resistance tests up to 1 with a 30 TΩ maximum resistance and an accuracy of ±5 % from 1 MΩ up to 3 TΩ. The MIT515 offers IR, DAR and PI functions but has no memory functionality. MIT525, MIT1025 and MIT1525 have a full suite of test modes as well as on-board memory and the ability to stream data/download data to a PC/ laptop. Instrument productivity is a focus of the new MIT range which offers rapid charge batteries and operation from an AC source if the batteries are flat. Rapid charge batteries enable > 60 minutes testing after a 30 minute charge. Safety rating is not compromised on the MIT range with all terminals safety rated to CATIV 600 V to 3000 m (, 10 kv or CATIV V to 3000 m (1). A range of and 10 kv test leads are available plus dedicated 1 test leads which are double insulated with clips designed for 1 creepage paths. The 1 leads are supplied in a rucksack. Suitably rated HV gloves and other personal protection equipment are required to be worn when testing. The MIT range share dual case design which includes a tough outer case to protect the tester from knocks/drops and an inner fire retardant case. The IP rating is IP 65 case closed eliminating moisture and dust ingress. An intuitive user interface ensures no lost time remembering how to use the tester. Simplicity of operation is achieved with two rotary switches and the large backlight display which enables multiple results to be displayed simultaneously. A graphical quick start guide is provided inside the lid to assist first time users. Five preset voltage ranges are provided in insulation test mode, plus a user settable lock voltage range. Preconfigured diagnostic tests include Polarisation Index (PI), Dielectric Absorption Ratio (DAR), dielectric discharge (DD), Stepped Voltage (SV) and ramp test. Advanced memory storage includes time/date stamping of results, logging of data and recall of results to screen. A fully isolated USB interface is used for safe transfer of data to Megger s asset management software; PowerDB Pro, Advanced and Lite packages. Test leads are double insulated t with clamps rated at 3 kv t equivalent to 6 kv single insulation for the medium clip leadset and t equivalent to 10 kv single insulation for the large clip. The 15kV leadset is insulated to 15kV. FEATURES AND BENEFITS Insulation resistance up to 30 1, 20 10kV, 10 IR, Timed IR, DAR, PI, DD, SV and ramp diagnostic tests High current 3 ma short circuit current High noise immunity 3mA (5kV and 10kV) 6mA (15kV) of noise rejection Li-ion battery up to 6 hrs continuous with a 100M load, battery meets IEC Safety rating: Large LCD display with backlight CATIV 600 V to 3000 m (, 10 kv) CATIV V to 3000 m (1) Dedicated voltmeter function (30 V to 660 V) Advanced memory, on screen recall and real time clock for date/time stamped results Download of on-board results via USB interface PowerDB Lite asset management software Recorded temperature (measured by independent instruments) can be saved with test result PowerDB Lite asset management software supplied

3 MIT515, MIT525, MIT1025, MIT1525 APPLICATION The Insulation Resistance (IR) test is a quantitative test which indicates the effectiveness of a product s electrical insulation. Applications include cables, transformers, motors/generators, circuit breakers and bushings. Common insulation tests are the spot test, a 1 minute IR test and a 10 minute Polarisation Index (PI) test, where PI is the ratio R10min/R1min and temperature independent. ELECTRICAL SPECIFICATIONS AC Voltage input range: V rms, 50/60 Hz, 100VA Battery: 11.1 V, 5.2Ah Li-ion batteries, meet IEC 62133:2003, MIT1525 has 2 battery packs Battery life MIT515, MIT525: 6 hours (typical) continuous testing at with a 100 MΩ load Battery life MIT1025: 4.5 hours (typical) continuous testing at 10 kv with a 100 MΩ load Battery life MIT1525: 4.5 hours (typical) continuous testing at 1 with a 100 MΩ load Battery charge time: 2.5 hours from deep discharge, 2 hours normal discharge Test voltages MIT515, MIT525: 250 V, 500 V, V, 2500 V, 5000 V, VL Test voltages MIT1025: 500 V, V, 2500 V, 5000 V, 0 V, VL Test Voltages MIT1525: V, 2500 V, 5000 V, 0 V, V, VL Lock test voltage VL: 40 V to 1 kv in 10 V steps, 1 kv to in 25 V steps, to 1 in 25 V steps Voltage o/p accuracy: +4%, -0%, ±10 V nominal test voltage at 1GΩ load (0 C to 0 C) Resistance Range: 10 k to k to kv 10 k to 30 1 Accuracy from 1 MΩ to: MIT515, MIT525 accuracy (23 C) 5000 V 2500 V V 500 V 250 V ±5% to 1 TΩ 500 GΩ 200 GΩ 100 GΩ 50 GΩ ±20% to 10 TΩ 5 TΩ 2 TΩ 1 TΩ 500 GΩ MIT1025 accuracy (23 ºC) 10 kv 5000 V 2500 V V 500 V ±5% to 2 TΩ 1 TΩ 500 GΩ 200 GΩ 100 GΩ ±20% to 20 TΩ 10 TΩ 5 TΩ 2 TΩ 1 TΩ MIT1525 accuracy (23 ºC) 1 10 kv 5000 V 2500 V V ±5% to 3 TΩ 2 TΩ 1 TΩ 500 GΩ 200 GΩ ±20% to 30 TΩ 20 TΩ 10 TΩ 5 TΩ 2 TΩ Centrally positioned Guard ring: Display range analogue: Display range digital: Short circuit current: Insulation alarm: Capacitor charge: Capacitor discharge: Guard parallel leakage, resistance down to 250 kω with a maximum additional resistance error of 1% with a 100 MΩ load. 100 kω to 10 TΩ 10 kω to 30 TΩ 3 10 kv, kω to 10 GΩ < 3 s/μf to, < 5 s/μf to 10 kv, < 7.5 s/uf to 1 to 50 V :< 120 ms/μf 10 kv to 50 V:< 250 ms/μf 1 to 50 V:< 3500 ms/μf 10 nf to 50 μf (dependant on Capacitance range: (> 500 V) measurement voltage) Capacitance accuracy: (23 C) Current measurement range: Current measurement accuracy: ±10% ±5 nf 0.01 na to 6 ma ±5% ±0.2 na at all voltages (23 C) Interference (noise) rejection: MIT515, MIT525, 3 ma from 450 V to MIT ma from 960 V to 10 kv MIT ma from 2100 V to 1 Voltmeter range: 30 V to 660 V ac or dc, 45Hz 65Hz Voltmeter accuracy: ±3%, ±3V Timer range: Up to 99 minutes 59 seconds, 15 second minimum setting Memory capacity: 5.5 hours 5 sec intervals Test regimes: IR, IR(t), DAR, PI, SV, DD, ramp test Interface: USB type B (device) Real time output: 1 Hz output readings (V, I, R) ENVIRONMENTAL SPECIFICATIONS Altitude: 3000 m (, 10 kv) 3000 m (1) Operating temperature: -20 C to 50 C Storage temperature: -25 C to 65 C Humidity: 90% RH non-condensing at 40 C Ingress protection: IP65 (lid closed), IP40 (lid open)

4 MIT515, MIT525, MIT1025, MIT1525 SAFETY SPECIFICATIONS Safety: EMC: CATIV 600 V to 3000 m (, 10 kv) CATIV V to 3000 m (1) Meets the requirements of IEC , Meets the requirements of IEC Dimensions: MIT515, MIT525, MIT1025 L 315 mm x W 285 mm x H 181 mm MIT1525 L 360 mm x W 305 mm x H 194 mm Weight: MIT515, MIT525, MIT kg MIT kg Item (Qty) Order Code MIT515-UK MIT515-US MIT515-EU MIT515-AU MIT525-UK MIT525-US MIT525-EU MIT525-AU MIT1025-UK MIT1025-US MIT1025-EU MIT1025-AU MIT1525-UK MIT1525-US MIT1525-EU MIT1525-AU Included Accessories Power lead USB cable PowerDB Lite software Product Information CD Included Accessories, 10 kv, 15kV 3 m leadset x 3, medium insulated clips m leadset x 3, large insulated clips (MIT1025 only) m leadset x 3, large 1 insulated clips (MIT1525 only) Optional Accessories 1 kv test lead sets Fused test probe and clip lead set Control circuit test lead set Authorized Distributor: WESCHLER INSTRUMENTS phone: fax: info@weschler.com Item (Qty) HV test lead sets 5kV, 10kV Order Code 5 m leadset x 3, large insulated clips* m leadset x 3, large insulated clips m leadset x 3, large insulated clips m leadset x 3, large insulated clips m leadset x 3, medium insulated clips* m leadset x 3, medium insulated clips m leadset x 3, medium insulated clips m leadset x 3, medium insulated clips m leadset x 3, bare compact clips m leadset x 3, bare compact clips m leadset x 3, compact bare clips * These test leads may also be supplied in non-standard lengths to suit a particular application / requirement. Please contact Megger for a quotation, minimum order quantities may apply. Screened HV test lead sets 3 m, screened un-insulated small clips m, screened un-insulated small clips m, 10 kv screened un-insulated small clips m, 10 kv screened un-insulated small clips m, 10 kv screened un-insulated small clips Other CB101, Calibration Box Calibration Certificate - CB UKAS calibration Certificate CB UK Archcliffe Road Dover CT17 9EN England T +44 (0) F +44 (0) UKsales@megger.com UNITED STATES 4271 Bronze Way Dallas TX USA T (USA only) T F USsales@megger.com OTHER TECHNICAL SALES OFFICES Valley Forge USA, College Station USA, Sydney AUSTRALIA, Danderyd SWEDEN, Ontario CANADA, Trappes FRANCE, Oberursel GERMANY, Aargau SWITZERLAND, Dubai UEA, Mumbai INDIA, Durban SOUTH AFRICA, Chonburi THAILAND, Malaga SPAIN CERTIFICATION ISO Registered to ISO 9001:2008 Cert. no. Q Registered to ISO Cert. no. EMS MIT _DS_en_V01 Megger is a registered trademark

5 Megger Insulation Resistance Testers MIT515 and MIT525 5kV Testers NEW This new generation of insulation testers offers increased measurement range, better accuracy, longer battery life, additional functionality and improved safety features. MJ15 and BM15 The BM15 and MJ15 are compact 5-kV insulation testers that are simple to use and provide a quick, accurate reading of insulation resistance. Both instruments offer four test voltages (500 V, 1 kv, 2., ), analog scales and measurement sensitivity to 20 GΩ. These models include pass/fail display overlays for a rapid go/no go testing and trend analysis. The BM15 is powered by 8 AA or rechargeable alkaline batteries while the MJ15 includes a hand-crank generator in addition to battery power. MJ15 MIT515 A rugged, portable tester designed for years of trouble free operation: Three industry standard tests can be programmed and run automatically Insulation resistance (IR) Dielectric absorption (DAR) Polarization index (PI) Resistance measurements to 10 TΩ with 5% accuracy up to 1 TΩ Voltage, capacitance & leakage current measurements Test voltage can be set in 10 V increments MIT515 from 50 V to 1 kv, and in 25 V increments above 1 kv Timer control, timer display and alarm limit modes Test lockout when an external voltage is present, for redundant safety Dual operation from AC line or rechargeable batteries MIT525 All the features of the MIT515 plus expanded capabilities to afford the skilled operator more flexibility in analyzing and reporting the condition of capital equipment: Ramp test, auto step voltage (SV) test, auto dielectric discharge (DD) test Advanced memory functions with recall to screen, real time clock, time/date stamped results and data downloaded via RS232 or USB ports Includes PowerDB Lite software for documenting test results TEST EQUIPMENT MIT kV Insulation Tester Same features and functions as the MIT525, but with 10kV maximum output: Test voltage range from 50 V to 10 kv, in 10 V increments to 1 kv and 25 V increments above 1 kv Increased measurement range to 20 TΩ, for testing the best insulating materials Automatic performance of standardized tests, including Step Voltage, Dielectric Absorption Ratio and Dielectric Discharge Capacitance measurements from 1 nf to 25 μf, providing additional equipment diagnostic information RS232 & USB ports for downloading test results A 'quick start' guide in the lid to make field operation simple and user-friendly NEW MIT1025 IEEE43:2000 "IEEE Recommended Practices for Testing Insulation Resistance of Rotating Machinery" recommends testing machines rated above 12kV at 10kV. The Polarisation Index test is performed on equipment and cables to assess the general condition of the insulation before applying potentially destructive test voltages. The new MIT 5kV & 10kV models easily perform both these tests. Catalog No. Test Voltage (V dc) Resistance ME/MJ kω 20GΩ ME/BM ME/MIT kω 10 TΩ ME/MIT kω 10 TΩ ME/MIT kω 20 TΩ kv 155

6 Megger Insulation Resistance Testers MJ Series The MJ159 is the recognized industry standard, upgraded with modern circuitry. This analog meter allows the trained operator to determine much more from the needle movement than just a MΩ reading. Available in line, battery or hand cranked models. Other features include: IR measurements to 2000MΩ Four test voltages to 1kV Guard terminal Continuity and kω functions for troubleshooting MJ159 MIT400 Series The MIT400 Insulation/Continuity Testers offer outstanding performance and ease of use. Dual digital displays show test results and test voltage simultaneously. Hands free 200 & 20mA continuity test ranges ensure the accurate measurement of circuit conductors and bonding. An audible continuity alarm speeds testing. These models offer: Insulation resistance measurements to 200GΩ; selectable test voltages to V Backlit LCD with dual digital and analog arc displays Leakage current readout (except MIT400) Live circuit warning & test inhibit for voltages >75V PI/DAR and Timer functions (except MIT400) IP54 & CAT IV 600V rating The MIT series offers TRMS & DC Voltage measurements to 600V. The MIT420 and MIT430 add capacitance (to 10uF), frequency (to 400Hz) and test result storage. MIT430 has Bluetooth for wireless data transfer and comes with Megger download software. All models include carrying case, test leads, battery. All models except the MIT400 also include a remote switch probe for hands free testing. MIT300 Series The new MIT300 Series features a large display and hands-free operation. The tough, rubber armored case is designed for rough handling and weatherproof to IP54. A rigid cover folds up to protect the front panel when not in use. Intelligent safety features include: MIT410 MIT310 Safety Interlock prevents unsafe connection of test leads Safe contact detectors the tester will remain safe and not be damaged if connected to a live circuit while on continuity setting. Live voltage warning alerts when circuit voltage is >25V. Safety lockout inhibits test when circuit voltage is >50V. Continuity check prevents a continuity test on a live circuit. Each model includes a 200mA continuity test function and continuity buzzer. All models except the MIT300 measure DCV & ACV (50/60Hz) to 600V. The MIT330 adds memory for storing test results and a USB interface. The MIT310A has an analog meter display for those who prefer a moving needle. Insulation Resistance Catalog No. Model No. Test Voltage (V dc) Resistance Range Display Power Source ME/ MJ , 250, 500, 0 to 2000 MΩ 0 to 5000 Ω Analog Hand-Cranked ME/ MJ , 250, 500, 0 to 2000 MΩ 0 to 5000 Ω Analog Line or Rech. Batt. ME/MIT400 MIT , 500, 0.01 MΩ to 20 GΩ 0.01 Ω to 999 kω Analog/ Dual Digital ME/MIT410 MIT410 50, MΩ to 100 GΩ 0.01 Ω to 999 kω Analog/ Alkaline or 250, 500, Dual Digital Rechargeable ME/MIT420 MIT420 50, MΩ to 200 GΩ 0.01 Ω to 999 kω Analog/ NIMH Battery 250, 500, Dual Digital (5 x AA) ME/MIT430 MIT430 50, MΩ to 200 GΩ 0.01 Ω to 999 kω Analog/ 250, 500, Dual Digital ME/MIT300 MIT , kω 999 MΩ Digital/Analog Alkaline or ME/MIT310 MIT , 10kΩ Digital/Analog Rechargeable ME/MIT310A MIT310A 500, 999 MΩ 10 Ω 2 kω Analog NICD/NIMH ME/MIT320 MIT , 10 kω 999 MΩ Ω Digital/Analog Battery ME/MIT330 MIT , with limit alarm 10 Ω 999 kω w/backlight (8 x AA) TEST EQUIPMENT 156