VF3 AC Voltage detector. User Guide Guide de l utilisateur Bedienungsanleitung Guía del usuario
|
|
- Jared Charles
- 6 years ago
- Views:
Transcription
1 VF3 AC Voltage detector User Guide Guide de l utilisateur Bedienungsanleitung Guía del usuario
2 GSAFETY WARNINGS The VF3 Voltage detector may help in the indication of live AC circuits only, and must not be used as verification of a de-energised circuit. This is not a safety test lamp. If damaged, do not use. This instruction guide and markings on the detector provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information provided. F WARNING - ELECTRIC SHOCK HAZARD : Contact with live circuits can result in severe injury or death Do not use the unit if it is wet or damaged Do not apply more than the rated voltage between the probe tip and earth ground Do not operate with the case open CAUTION: Do not attempt to repair this unit, it contains no user-serviceable parts Do not expose the unit to extremes in temperature or high humidity
3 CATIV - Measurement category IV: Equipment connected between the origin of the low-voltage mains supply outside the building and the consumer unit. CATIII - Measurement category III: Equipment connected between the consumer unit and the electrical outlets. CATII - Measurement category II: Equipment connected between the electrical outlets and the user s equipment. t Equipment protected throughout by double insulation (Class II). Equipment complies with current EU directives. End of life disposal WEEE DIRECTIVE The crossed out wheeled bin symbol on the instrument and on the batteries is a reminder not to dispose of them with general waste at the end of their life. Megger is registered in the UK as a Producer of Electrical and Electronic equipment. The registration no is; WEE/DJ2235XR.
4 Users of Megger products in the UK may dispose of them at the end of their useful life by contacting B2B Compliance at or by telephone on Users of Megger products in other parts of the EU should contact their local Megger company or distributor. BATTERY DISPOSAL Batteries in this product are classified as Portable Batteries under the Batteries Directive. Please contact Megger Ltd for instructions on the safe disposal of these batteries. For disposal of batteries in other parts of the EU contact your local distributor. Megger is registered in the UK as a producer of batteries. The registration number is BPRN For Further information see G Read and understand all instructions and safety information in this guide before operating this detector.
5 DESCRIPTION The Megger VF3 voltage detector is intended to check for the presence of AC voltage, signaled by a bright red LED situated within the white nylon tip and an audible buzzer. The VF3 has the added advantage of a bright-white LED flashlight for use in poor light. FEATURES Non-contact detection of AC voltage 100 V V AC 50 Hz/60 Hz Visual and audible warning of high voltage Durable rubber over-moulded body Built in bright-white LED flashlight Low power consumption - many hours of flashlight illumination from one set of alkaline batteries Convenient pocket-size The Megger VF3 is useful for identifying live conductors, finding a break in a wire, verifying a blown fuse while in circuit, and detecting the presence of AC voltage at Socket outlets Switches Circuit breakers
6 Fuses Wires and cables Luminaires GOOD PRACTICE: Before each use the unit must be tested on a known live supply. Place the probe tip on or near the circuit under test. The probe tip will glow bright red and the buzzer will sound when an AC voltage between 90 V and 600 V is detected. If the unit still fails to operate satisfactorily, return for repair. If the unit does not function as expected, replace the batteries. NOTE: The VF3 cannot detect voltage on armoured or sheathed cable, or on cable in conduit, behind panels or in metallic enclosures. FLASHLIGHT Operate the black button alternately to turn the white LED ON and OFF.
7 BATTERY REPLACEMENT Remove the unit from proximity of any live circuits Turn off flashlight Remove battery cap (1) by lifting clip (2) slightly and pulling cap (1) off body (3) Replace batteries, carefully observing correct type and polarity Replace battery cap (1) VF3
8 SPECIFICATIONS INDICATORS: OPTICAL VIA LED AND ACOUSTICAL VIA BUZZER Voltage range: V AC 50/60 Hz Operating temp: -10 C - 50 C Humidity: Max. 90% Safety: EN :2010 EMC: EN61326 Safety Rating: CAT IV 600 V Battery: 2 x AAA / LR03 Size: 178 mm x 26 mm Weight: 48 g (including batteries)
9 VF3 AC Voltage detector VF3 AC Voltage detector Exclusive Megger design Non-contact detection of AC voltage Automatic audible warning buzzer Bright red voltage indicator in tip Ultra bright LED torch CAT IV 600 V DESCRIPTION The Megger VF3 Voltage detector is a compact pen-style instrument to identify the presence of live AC voltages from 90 V to 600 V at 50 or 60 Hz. Voltage is capacitively detected, signalled on the VF3 by the illumination of a bright red LED situated within the white nylon tip. The VF3 has the additional feature of an audible warning device actuated simultaneously to the red LED. The VF3 incorporates a flashlight torch. Extended battery life is achieved by the use of a bright-white LED. APPLICATION The VF3 can be used for identifying the presence of ac voltage at socket outlets, switches, circuit breakers, fuses, luminaries, wires and cables. It can identify breaks in conductors by tracing along the cable from the source to the point where the indicator no longer illuminates; and also identify a blown fuse while in circuit.
10 SPECIFICATIONS AC voltage (auto-ranging) Torch Power supply 90 to 600 V AC 50/60 Hz Ultra bright LED 2 piles 1,5 V type AAA LR03 Dimensions 178 mm x 26 mm Weight 48 g Environmental Operating temperature range C Humidity 90% max. IP rating IP65 Safety CAT IV 600 V Compliance EN :2010 ORDERING INFORMATION Description Order Code Box of 12 VF3 voltage detectors UK Archcliffe Road Dover CT17 9EN England T +44 (0) F +44 (0) UKsales@megger.com UNITED STATES 4271 Bronze Way Dallas TX USA T (USA only) T F USsales@megger.com OTHER TECHNICAL SALES OFFICES Valley Forge USA, College Station USA, Sydney AUSTRALIA, Täby SWEDEN, Ontario CANADA, Trappes FRANCE, Oberursel GERMANY, Aargau SWITZERLAND, Kingdom of BAHRAIN, Mumbai INDIA, Johannesburg SOUTH AFRICA, Chonburi THAILAND CERTIFICATION ISO Registered to ISO 9001:2000 Cert. no. Q Registered to ISO Cert. no. EMS VF3_ds_en_V02 Megger is a registered trademark 2
MIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV Industrial Insulation Testers MIT400 CAT IV Industrial Insulation Testers CAT IV 600 V applications Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV CAT IV 600 V applications TRMS & DC Voltage measurement Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to 0.01 Ω Pass/Fail limit alarms
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV CAT IV 600 V applications TRMS & DC Voltage measurement Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to 0.01 Ω Pass/Fail limit alarms
More informationG SAFETY WARNINGS. LT300 High current loop tester. User guide
M LT300 High current loop tester User guide G SAFETY WARNINGS Safety Warnings and Precautions must be read and understood before the instrument is used. They must be observed during use. The earth loop
More informationLaboratory oil testers
OTS100AF, OTS80AF and OTS60AF n Laboratory instruments for measuring insulating oil breakdown voltage n Lock in precision oil vessel with lockable adjustment n Bright 3.5 colour display visible out doors
More information5-kV and 10-kV Insulation Resistance Testers. n CAT IV 600 V safety rating. n Line supply or battery operated
n CAT IV 600 V safety rating n Line supply or battery operated n Noise rejection (3mA or 4mA rms@200v and above) for use in high voltage substations or switchyards n 5mA output current provides fast charging
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV n CAT IV 600 V applications n TRMS & DC Voltage measurement n Insulation testing up to 1000 V and 200 GΩ n Continuity testing at 200 ma or 20 ma down to 0.01 Ω n Pass/Fail limit
More informationODEN AT Primary Current Injection Test System
ODEN AT Most Advanced Primary Current Injection Test System to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more Modular design to permit optimal user
More informationTDR1000/3 TDR1000/3P CFL510G TDR500/3. Time Domain Reflectometers. User Manual. Page 1 of 1
M TDR1000/3 TDR1000/3P CFL510G TDR500/3 Time Domain Reflectometers User Manual Page 1 of 1 CONTENTS Introduction...5 Overview...7 Instrument layout and display...7 Controls...9 Rotary switch...9 Range
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Programma Programma High current/high power output Freeze and hold readings Interconnect up to three test sets for three
More informationn Single- and three-phase transformer n Lightweight, handheld n Battery powered, line rechargeable n Tests turns ratio, phase displacement,
TTR 100 n Single- and three-phase transformer testing (up to 1 MVA) n Lightweight, handheld n Battery powered, line rechargeable n Tests turns ratio, phase displacement, excitation current, winding resistance
More informationBM25 Automated 5-kV Insulation Tester
Insulation resistance measured to >5 TΩ Automated testing Polarization Index and Step Voltage tests Dielectric discharge test for multilayer insulation RS-232 download capability Weatherproof DESCRIPTION
More informationBMM80 Premium Insulation Multimeters
Insulation measurement to 200 GΩ 200 ma Short Circuit Current output mv Transducer inputs Test lead/transducer null facility Backlight Remote control switched probe included Capacitance Measurement to
More informationMIT515, MIT525, MIT1025
MIT515, MIT525, MIT1025 5-kV and 10-kV Insulation Resistance Testers n Industry best guard terminal accuracy n Compact and lightweight for easy transport and use PI, DAR, DD, SV and ramp test Unique dual
More informationMIT510, MIT520 and MIT1020
MIT510, MIT520 and MIT1020 Line supply or battery operated Digital/analog backlit display Measurement range to 15 TΩ (MIT510 and MIT520) and 35 TΩ (MIT1020) Automatic insulation resistance tests Automatic
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Smallest and most rugged FRA instrument in the industry Highest possible repeatability by using reliable cable practice
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) MIT515, MIT525, MIT1025 MIT515, MIT525, MIT1025 5-kV and 10-kV Insulation Resistance Testers n Industry best guard terminal
More informationHT1000/2 Series Copper Wire Analyser
HT1000/2 Series Copper Wire Analyser HT1000/2 Series Copper Wire Analyser Vectored DSL testing for VDSL2 lines Noise finder via a 30 MHz spectrum analyzer 7 user selectable auto tests Incremental pair
More information323/324/325 Clamp Meter
323/324/325 Clamp Meter Users Manual May 2012 Rev.1, 06/15 2012-2015 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their
More informationMIT400/2 CAT IV Insulation testers
MIT400/2 CAT IV Insulation testers MIT400/2 CAT IV Insulation testers Designed for Electrical and Industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilised insulation test voltage
More information15B+/17B+/18B+ Calibration Manual. Digital Multimeter
5B+/7B+/8B+ Digital Multimeter Calibration Manual April 206 206 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective
More informationAgilent U1211A, U1212A, and U1213A Clamp Meter. Quick Start Guide U1211A U1212A U1213A
Agilent U1211A, U1212A, and U1213A Clamp Meter U1211A U1212A U1213A The following items are included with your clamp meter: Standard test leads with 19 mm probes Soft carrying case and 4 mm probes Certificate
More information4-range High voltage insulation resistance tester KEW 3126
INSTRUCTION MANUAL 4-range High voltage insulation resistance tester KEW 3126 Contents 1. Safety warnings 1 2. Feature 5 3. Specification 6 4. Instrument layout 4-1 Instrument layout 9 4-2 LCD display
More informationDawson DDM190. Digital Multimeter User s Manual
Dawson DDM190 Digital Multimeter User s Manual TABLE OF CONTENTS LIMITED WARRANTY AND LIMITATION OF LIABILITY... 3 Out of the Box... 3 Accessories.. Error! Bookmark not defined. Safety Information... 7
More informationAccuracy 1.2 PERCENT AC VOLTAGE, 0.5 PERCENT DC VOLTAGE, 1.5 PERCENT DC CURRENT, 1 PERCENT RESISTANCE, 2.5 PERCENT TEMPERATURE Battery Type
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 61603 Digital Multimeter Ideal Catalog Number 61603 Manufacturer Ideal Description Multimeter, Digital; Parameter Measured
More informationMFT1735 User guide addendum
Megger Limited Archcliffe Road Dover, Kent CT17 9EN England T +44 (0)1 304 502101 F +44 (0)1 304 207342 Megger 4271 Bronze Way, Dallas, TX 75237-1019 USA T +1 800 723 2861 T +1 214 333 3201 F +1 214 331
More informationMIT400 Series Insulation and continuity testers
M MIT400 Series Insulation and continuity testers USER GUIDE USER GUIDE CONTENTS 1. Introduction 3 2. Safety Warnings 4 3. Symbols used on the instrument 5 4. General Description 6 Unpacking the carton
More informationUSER MANUAL 600A AC Clamp Meter + NCV Model MA610
USER MANUAL 600A AC Clamp Meter + NCV Model MA610 Additional User Manual Translations available at www.extech.com Introduction Thank you for selecting the Extech MA610 Clamp Meter. This meter measures
More informationDET4 Series. 4-Terminal Earth/Ground Resistance and Soil Resistivity Testers. DET4 Series Earth/Ground Resistance & Soil Resistivity Testers
4-Terminal Earth/Ground Resistance and Soil Resistivity Testers DET4 Series 2, 3 and 4 point testing Stakeless (clamp-on) testing capability ART (Attached Rod Technique) capability Multiple, user selectable
More informationMultiMeter-Pocket CAT III 1000 V
02 10 18 26 34 42 50 58 66 74 82 DE GB NL DK FR ES IT PL FI PT SE AC DC AC DC CAT III 1000 V 90 98 106 114 122 130 138 146 154 162 170 NO TR RU UA CZ EE LV LT RO BG GR ! Read the operating instructions
More informationDM-45 Digital Multimeter
INSTRUCTION MANUAL DM-45 Digital Multimeter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Description The Greenlee DM-45 Digital
More informationAEMC Megohmmeters. AEMC Flexible Current Probe
AEMC Megohmmeters T EST E QUIPMENT V Digital/Analog Megohmmeter Models 1050 & 1060 True Megohmmeter Test voltage combinations of 50V, 100V, 250V, 500V and V Insulation measurements to 4000GΩ (4TΩ) Direct
More informationMeasure voltage without test leads. Product Highlights
Measure voltage without test leads Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage. + Without opening covers or removing wire nuts. On wires up to AWG 4/0
More informationPEN TYPE DIGITAL MULTIMETER OPERATION MANUAL T8211D
PEN TYPE DIGITAL MULTIMETER OPERATION MANUAL T8211D T8211D 1 1. SAFETY INFORMATION BE EXTREMELY CAREFUL IN THE USE OF THIS METER. Improper use of this device can result in electric shock or destroy of
More informationDigital automotive analyser 13 function with ic
Digital automotive analyser 13 function with ic Model no: TA201 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and
More informationMT /6 Smart Digital Clamp Meter. User s Manual 1 st Edition, 2016 Copyright by Prokit s Industries Co., Ltd.
MT-3110 3 5/6 Smart Digital Clamp Meter User s Manual 1 st Edition, 2016 Copyright by Prokit s Industries Co., Ltd. 1.Safety Information Warnings Special attention shall be paid when using the meter, improper
More informationMegger PO BOX 9007, Valley Forge PA USA T +1 (610) F +1 (610)
M Megger Limited Archliffe Road, Dover Kent CT17 9EN England T +44 (0) 1304 502 101 F +44 (0) 1304 207 342 Megger PO BOX 9007, Valley Forge PA 19484-9007 USA T +1 (610) 676 8500 F +1 (610) 676 8610 Megger
More informationMIT480/2 Insulation testers
MIT480/2 Insulation testers MIT480/2 Insulation testers Insulation testing up to 500 V and 100 GΩ range in a hand held instrument 3 wire connection for A, B and E (Tip, Ring and Earth) connection (New)
More informationMIT400/2 CAT IV Insulation testers
MIT400/2 CAT IV Insulation testers MIT400/2 CAT IV Insulation testers Designed for Electrical and Industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilised insulation test voltage
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-340 MODEL: 61-342 Multimeter Service Information The Service Information provides the following information: Precautions and safety information Specifications
More informationUSER MANUAL. Model MA A AC Mini Clamp-on Meter. Additional User Manual Translations available at
USER MANUAL Model MA150 200A AC Mini Clamp-on Meter Additional User Manual Translations available at www.extech.com Introduction Thank you for selecting the Extech MA150 AC Mini Clamp Meter. This device
More informationMS2030 CAT III 600 V A V AUTO RS232
MS2030 AC Digital Clamp Meter User s Manual CAT III 600 V AUTO RS232 A V CONTENTS 1.Introduction...1 2.Safety Information...1 2.1 Precautions...1 2.2 Safety Symbols...3 3. Description...4 3.1 Front Panel...4
More information374 FC/375 FC/376 FC Clamp Meter
374 FC/375 FC/376 FC Clamp Meter PN 4705494 September 2015 2015 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective
More informationPeakTech 1090/1095. Bedienungsanleitung / Operation manual / Mode d emploi / Istruzioni per l'uso / Manual de instrucciones
PeakTech 1090/1095 Bedienungsanleitung / Operation manual / Mode d emploi / Istruzioni per l'uso / Manual de instrucciones AC/DC Spannungsprüfer / AC/DC Voltage Tester / Tensiomètre CA/CC / Voltmetro AC/DC
More informationInstruction Manual IDM 61/62T Digital Multimeter EN DE ES IT FR
Instruction Manual IDM 61/62T Digital Multimeter EN DE ES IT FR Safety Information Read and understand this Instruction Manual completely before using this instrument. Failure to observe the warnings and
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL:
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-352 The Service Information provides the following information: Precautions and safety information Specifications Basic maintenance (cleaning, replacing
More informationBITE 3 Battery Impedance Test Equipment
BITE 3 n Determines health of lead-acid cells up to 2000 Ah n On-line testing with Pass/Warning/Fail calculations n Measures impedance, interconnection resistance and cell voltage n Windows CE operating
More informationElectrical Measuring Instruments. Vol.3.
Electrical Measuring Instruments GENERAL CATALOG ol.3 www.kaise.com Contents Clamp Meters Insulation Testers Earth Tester Digital Multimeters Automotive Testers Other Testers Accessories Digital Clamp
More informationMS8211 DIGITAL MULTIMETER INSTRUCTION MANUAL
MS8211 DIGITAL MULTIMETER INSTRUCTION MANUAL Ω CONTENTS CONTENTS 1. SAFETY INFORM...1 4.4 Range Transform...10 1.1 Preliminary...1 4.5 Auto Power Off...10 1.2 During use...2 4.6 Preparation For Measurement...11
More informationBUILDING INSTALLATIONS AND ELECTRICAL SYSTEMS
BUILDING INSTALLATIONS AND ELECTRICAL SYSTEMS The right electrical tester for all applications. The user guide provides an overview of electrical test segments and working ranges. Working ranges AC-tiveFinder
More informationDDM350 Pen-Type Digital Multimeter User s Manual
DDM350 Pen-Type Digital Multimeter User s Manual CONTENTS LIMITED WARRANTY AND LIMITATION OF LIABILITY....1 Out of the Box...1 Accessories......2 Safety Information...2 Safety Symbols...3 Certification......4
More informationFor detailed specifications and ordering info go to
For detailed specifications and ordering info go to www.testequipmentdepot.com ECB50A, ECB50A-E, ECB50A-FGIS Circuit Breaker Finder and AC Cable Tracer User Manual For detailed specifications and ordering
More informationBUILDING INSTALLATIONS AND ELECTRICAL SYSTEMS
Electrial meters 27 BUILDING INSTALLATIONS AND ELECTRICAL SYSTEMS Whether non-contact voltage tester, fully-protected multimeter or universal cable tracer: Professional tradesmen appreciate the varied
More informationIDM 503 & 505 Digital Multimeters
Instruction Manual IDM 503 & 505 Digital Multimeters IDM 505 SECTION 1 SAFETY INFORMATION Safety Information Understand and follow operating instructions carefully. Use the Instrument only as specified
More informationFRAX 101 Sweep Frequency Response Analyzer
Smallest and most rugged FRA instrument in the industry Highest possible repeatability by using reliable cable practice and highperformance instrumentation Fulfills all international standards for SFRA
More informationAM-510 Commercial / Residential Multimeter. AM-510-EUR Digital Multimeter. Users Manual
AM-510 Commercial / Residential Multimeter AM-510-EUR Digital Multimeter Users Manual AM-510 Commercial / Residential Multimeter AM-510-EUR Digital Multimeter English Users Manual Limited Warranty and
More informationEM420A/420B DIGITAL MULTIMETER OWNERS MANUAL Read this owners manual thoroughly before use
http://www.all-sun.com EM420A/420B DIGITAL MULTIMETER OWNERS MANUAL V Read this owners manual thoroughly before use WARRANTY This instrument is warranted to be free from defects in material and workmanship
More informationUSER MANUAL. Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330
USER MANUAL Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330 Introduction Congratulations on your purchase of the Extech EX330 Meter. The EX330 offers AC/DC Voltage, AC/DC Current, Resistance,
More informationMEGGER BMM2000 Series Insulation Multimeters User Guide
MEGGER BMM2000 Series Insulation Multimeters User Guide SAFETY WARNINGS Safety Warnings and Precautions must be read and understood before the instrument is used. They must be observed during use. The
More informationAM-500 Autoranging Mulitmeter. AM-500-EUR Digital Multimeter. Users Manual
AM-500 Autoranging Mulitmeter AM-500-EUR Digital Multimeter Users Manual AM-500 Autoranging Mulitmeter AM-500-EUR Digital Multimeter English Users Manual 8/2012, 4275548 A 2012 Amprobe Test Tools. All
More informationUser s Manual. Miniature Passive Probe. IM EN 3rd Edition
User s Manual Miniature Passive Probe IM 701946-01EN 3rd Edition Thank you for purchasing the miniature passive probe. This miniature passive probe is designed for user s safety and excellent easyto-use
More informationUser s Guide. Model MA A AC Mini Clamp-on Meter
User s Guide Model MA150 200A AC Mini Clamp-on Meter Introduction Congratulations on your purchase of Extech s MA150 AC Mini Clamp Meter. This meter is shipped fully tested and calibrated and, with proper
More informationMICROTOOLS MICRONETBLINK KIT
MICROTOOLS MICRONETBLINK KIT MicroNetBlink TM MicroProbe TM User Guide Manuel Utilisateur Benutzer Handbuch Manuale per l'utente Guía del Usuario Manual do Utilizador 2947-4511-01 Rev. 01 11/01 2001 Fluke
More informationBENNING. Service Information MODEL: MM1-1 / MM1-2 / MM1-3
BENNING MODEL: MM1-1 / MM1-2 / MM1-3 Service Information The Service Information provides the following information: Precautions and safety information Specifications Basic maintenance (cleaning, replacing
More informationIDM 98-III & IDM 99-III Digital Multimeters
Instruction Manual IDM 98-III & IDM 99-III Digital Multimeters IDM 99-III SECTION 1 SAFETY INFORMATION Safety Information Understand and follow operating instructions carefully. Use the instrument only
More informationT5-600/T Electrical Tester
T5-600/T5-1000 Service Information Introduction This service information sheet provides the following information for the T5-600 and T5-1000 Electrical Testers (hereafter referred to as "the tester").
More informationDVM645BI BENCH MULTIMETER TAFELMULTIMETER MULTIMETRE DE TABLE BANCO MULTÍMETRO TISCHMULTIMETER. User Manual. Gebruikershandleiding
BENCH MULTIMETER TAFELMULTIMETER MULTIMETRE DE TABLE BANCO MULTÍMETRO TISCHMULTIMETER User Manual Gebruikershandleiding Manuel d'utilisation Gebrauchsanleitung Introduction BENCH MULTIMETER This manual
More informationBENNING. CM7 Electrical Tester. Service Information
BENNING CM7 Electrical Tester Service Information TABLE OF CONTENTS Page Introduction 1 Precautions and Safety Information 1 Symbols 1 Safety 2 Specifications 3 General Specification 3 Voltage Specification
More informationCircuit Breaker Finder
ECB50-FGIS Circuit Breaker Finder and AC Line Tracer User Manual ECB50-FGIS Circuit Breaker Finder and AC Cable Tracer Contents Safety Information...3 Symbols Used in this Manual...3 Introduction...4 Finding
More information99 Washington Street Melrose, MA Fax TestEquipmentDepot.com # # AAC Clamp Meter. Instruction Manual
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com #61-732 #61-736 400 AAC Clamp Meter Instruction Manual AC HOLD APO DC KMΩ mva WARNING Read First: Safety Information Understand
More informationFRAX Series Sweep Frequency Response Analyzers
Highest dynamic range and accuracy in the industry Smallest and most rugged FRA instrument in the industry Fulfills all international standards for SFRA measurements Advanced analysis and decision support
More informationUSER'S MANUAL DMR-4350
USER'S MANUAL DIGITAL MULTIMETER DMR-4350 CIRCUIT-TEST ELECTRONICS www.circuittest.com TABLE OF CONTENTS SAFETY Safety Information...................................... 2 Safety Symbols........................................
More informationUSER'S MANUAL TIS 859, TIS 849 & TIS 839 Voltage Tester
USER'S MANUAL TIS 859, TIS 849 & TIS 839 Voltage Tester 2 1) SAFETY This manual contains information and warnings that must be followed for operating the tester safely and maintaining the meter in a safe
More informationMM V 10A ENGLISH. INSTRUCTION MANUAL Auto-Ranging DATA HOLD AUDIBLE CONTINUITY MIN / MAX TEMPERATURE DIODE TEST CAPACITANCE
INSTRUCTION MANUAL Auto-Ranging Digital Multimeter MM400 DATA HOLD AUDIBLE CONTINUITY MIN / MAX TEMPERATURE DIODE TEST CAPACITANCE 600V 10A 40MΩ 2 GENERAL SPECIFICATIONS Klein Tools MM400 is an auto-ranging
More informationMIT415 Insulation tester
MIT415 Insulation tester General features o 10V & 100V ESD testing o 25V, 50V, 250V & 500V additional ranges o Insulation testing up to 50Gohms (500V) o Continuity testing at 200mA or 20mA from 0.01ohms
More informationFluke T5 Electrical Testers. Fluke T and T5-600 Voltage, Continuity and Current Testers
Fluke T5 Fluke T5-1000 and T5-600 Voltage, Continuity and Current Testers Excellent front-line troubleshooting and measurement tool Available in 600 V and 1000 V models OpenJaw current measurement Rotary
More informationMIT400 Series CAT IV Insulation Resistance and Continuity Testers
Insulation testing up to 1000 V and 200 GΩ Patented analog arc and dual digital display CAT IV 600 V rating TRMS & DC Voltage measurement Continuity testing at 200 ma or 20 ma down to 0.01 Pass/Fail limit
More information600A Clamp Meters w/tightsight Display
V 750V #61-764 #61-766 #61-768 600A Clamp Meters w/tightsight Display Instruction Manual 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com CAT.IV 600V CAT.III 1000V 600A 61-766
More informationRIGOL. User s Guide. RP5600 Passive Probe. July 2010 RIGOL Technologies, Inc.
User s Guide RP5600 Passive Probe July 2010 RIGOL Technologies, Inc. Guaranty and Declaration Copyright 2010 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information RIGOL is a registered trademark
More informationDigital Automotive Analyser 14 Function With IC
Digital Automotive Analyser 14 Function With IC Model no: TA202 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and
More informationMM700. True RMS ENGLISH. INSTRUCTION MANUAL Auto-Ranging. Measurement Technology
INSTRUCTION MANUAL Auto-Ranging Digital Multimeter er True RMS Measurement Technology MM700 DATA & RANGE HOLD LOW IMPEDANCE AUDIBLE CONTINUITY MIN / MAX / RELATIVE TEMPERATURE DIODE TEST CAPACITANCE &
More informationOWNER S MANUAL HH0308C. AUTO-RANGING DC/True RMS AC DIGITAL MULTIMETER
OWNER S MANUAL HH0308C AUTO-RANGING DC/True RMS AC DIGITAL MULTIMETER IMPORTANT! Read and understand this manual before using the tester. Failure to understand and comply with safety rules and operating
More informationModel ST Instruction Manual. True RMS Autoranging Digital Multimeter. reedinstruments. www. com
Model ST-9933 True RMS Autoranging Digital Multimeter Instruction Manual reedinstruments com Table of Contents Safety... 3 Features... 4 Specifications...4-8 Technical...4-5 Accuracy...5-8 Display Description...
More informationTTR 100 Single-Phase Handheld TTR
TTR 100 Fully automatic; fast; easy-to-use; handheld; robust; lightweight Battery powered with power-saving and shutdown function Tests turns ratio, phase displacement, excitation current, vector group,
More informationInstruction Manual IDM 98-III & IDM 99-III Digital Multimeters
Africa 1 & 2 Indianapolis Street Kyalami Business Park Kyalami, Midrand, South Africa Asia 460 Alexandra Road, #15-01A PSA Building Singapore 119963 Instruction Manual IDM 98-III & IDM 99-III Digital Multimeters
More informationKeysight U1231A/ U1232A/U1233A Handheld Multimeter. Quick Start Guide
Keysight UA/ UA/UA Handheld Multimeter Quick Start Guide Contacting Keysight www.keysight.com/find/assist (worldwide contact information for repair and service) Safety and EMC Information This meter is
More informationMIT400/2. CAT IV Insulation testers MIT430/2: CAT IV Insulation testers
MIT400/2 Designed for electrical and industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilized insulation test voltage (New) Single range, faster continuity testing from 0.01 Ω to
More informationAgilent U1273A/U1273AX Handheld Digital Multimeter. Quick Start Guide
Agilent U1273A/U1273AX Handheld Digital Multimeter Quick Start Guide Verify that you received the following items in the shipment of your multimeter: One pair of red and black test leads One pair of 4
More informationUSER'S MANUAL DMR-4300
USER'S MANUAL DIGITAL MULTIMETER DMR-4300 CIRCUIT-TEST ELECTRONICS www.circuittest.com TABLE OF CONTENTS SAFETY Safety Information...................................... 2 Safety Symbols........................................
More informationInstruction Manual ET4 ELECTRICAL TESTER
ET4 ELECTRICAL TESTER Instruction Manual GENERAL SAFETY INFORMATION: Always read before proceeding. Warning These instructions contain both information and warnings that are necessary for the safe operation
More informationCable Identifier Reliable cable selection for energised and de-energised cables
Reliable cable selection for energised and de-energised cables Inexpensive cable selection system Easy to operate Safe to handle Very small DESCRIPTION Clear identification of a cable before it is cut
More informationAgilent U1231A/U1232A/U1233A Handheld Multimeter. Quick Start Guide
Agilent U3A/U3A/U33A Handheld Multimeter Quick Start Guide Verify that you received the following items in the shipment of your multimeter: One pair of red and black test leads Four.5 V AAA alkaline battery
More informationMFT1800 series. Multifunction testers. User manual
M MFT1800 series Multifunction testers User manual 1 Contents X.1 SAFETY WARNINGS 4 1. Introduction 5 2. Overview 6 2.1 Front panel and controls 6 2.2 Waste electrical and electronic equipment 9 2.3 Battery
More information# Digital Multimeter
#61-797 Digital Multimeter - 1 - TABLE OF CONTENTS 1.Introduction Precautions and Safety Information Symbols Safety 2.Specifications General Specifications Electrical Specifications Required Equipment
More informationCompact Autoranging Clamp Meters. Models (400 A AC), (400 A AC/DC)
User Manual Compact Autoranging Clamp Meters with NIST-Traceable Calibration Models 20250-55 (400 A AC), 20250-56 (400 A AC/DC) THE STANDARD IN PRECISION MEASUREMENT 1065DGMAN_20250-55,-56 DS Clamp Meter
More information400Amp True RMS AC Clamp Meter + NCV
User Guide 400Amp True RMS AC Clamp Meter + NCV Model MA410T Introduction Thank you for selecting the Extech MA410 Clamp Meter. This meter measures AC Current, AC/DC Voltage, Resistance, Capacitance, Frequency,
More informationMFT1800 Series. Multifunction testers. User Manual
MFT1800 Series Multifunction testers User Manual Contents X.1 SAFETY WARNINGS... 4 1. Introduction... 5 2. Overview... 6 2.1 Front panel and controls 6 2.2 Waste electrical and electronic equipment 9 2.3
More informationDawson DDM181. Pocket-Size Autorange Digital Meter User s Manual
Dawson DDM181 Pocket-Size Autorange Digital Meter User s Manual 1 Table of Contents LIMITED WARRANTY AND LIMITATION OF LIABILITY... 3 Out of the Box... 3 Accessories... 4 Important Safety Information...
More informationCL900. True RMS 1000V 2000A 60MΩ ENGLISH. INSTRUCTION MANUAL 2000A Digital Clamp Meter. Measurement Technology
ENGLISH INSTRUCTION MANUAL 2000A Digital Clamp Meter True RMS Measurement Technology NON-CONTACT VOLTAGE TESTING INRUSH CURRENT LOW IMPEDANCE DATA HOLD RANGE HOLD AUDIBLE CONTINUITY DIODE TEST CAPACITANCE
More informationOPERATING INSTRUCTION
OPERATING INSTRUCTION AUTOMOTIVE MULTIMETER MODEL QM1444 the finger guards on the probes. Measuring voltage which exceeds the limits of the multimeter may damage the meter and expose the operator to a
More information