Datasheet. InnoLux G150XNE-L01 CH

Size: px

Start display at page:

Download "Datasheet. InnoLux G150XNE-L01 CH"

Osborn Butler
5 years ago
Views:

However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the

1 Datasheet InnoLux G5XNE-L CH--58 The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the information provided herein. Our products are not intended for use in systems in which failures of product could result in personal injury. All trademarks mentioned herein are property of their respective owners. All specifications are subject to change without notice.

2 Tentative Specification Preliminary Specification Approval Specification MODEL NO. G5XNE SUFFIX L Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with your signature and comments. Approved By Checked By Prepared By 阮泰郎林秋森吳承旻 Version December 27 / 29

3 CONTENTS. GENERAL DESCRIPTION OVERVIEW FEATURE APPLICATION GENERAL SPECIFICATINS MECHANICAL SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS ABSOLUTE RATINGS OF ENVIRONMENT ELECTRICAL ABSOLUTE RATINGS TFT LCD MODULE BACKLIGHT UNIT ELECTRICAL CHARACTERISTICS TFT LCD MODULE BACKLIGHT UNIT BLOCK DIAGRAM TFT LCD MODULE INPUT TERMINAL PIN ASSIGNMENT TFT LCD MODULE BACKLIGHT UNIT(Converter connector pin) COLOR DATA INPUT ASSIGNMENT INTERFACE TIMING INPUT SIGNAL TIMING SPECIFICATIONS POWER ON/OFF SEQUENCE SCANNING DIRECTION OPTICAL CHARACTERISTICS TEST CONDITIONS OPTICAL SPECIFICATIONS RELIABILITY TEST CRITERIA PACKAGING PACKING SPECIFICATIONS PACKING METHOD UN-PACKING METHOD DEFINITION OF LABELS INX MODULE LABEL PRECAUTIONS ASSEMBLY AND HANDLING PRECAUTIONS SAFETY PRECAUTIONS Version December 27 2 / 29

4 2. MECHANICAL CHARACTERISTICS Version December 27 3 / 29

5 REVISION HISTORY Version Date Page Description Ver 3. 7 Mar 27 All Approval Specification was first issued. Ver 3. 5 Apr Added note(4) & modified the description of pin function. Ver Nov Modified 5.2 Note(2) User s connector part no. Version December 27 4 / 29

6 . GENERAL DESCRIPTION. OVERVIEW G5XNE-L is a 5. TFT Liquid Crystal Display IAV module with LED Backlight units and 2 pins LVDS interface. This module supports 24 x 768 XGA mode and can display 6.7M/262k colors. The PSWG is to establish a set of displays with standard mechanical dimensions and select electrical interface requirements for an industry standard 5. XGA LCD panel and the LED driving device for Backlight is built in PCBA..2 FEATURE - XGA (24 x 768 pixels) resolution - DE (Data Enable) only mode - LVDS Interface with pixel/clock - PSWG (Panel Standardization Working Group) - Wide operating temperature. - RoHS compliance.3 APPLICATION -TFT LCD Monitor - Factory Application - Amusement - Vehicle.4 GENERAL SPECIFICATINS Item Specification Unit Note Active Area 34. (H) x 228.(V) (5. diagonal) mm Bezel Opening Area 37.4(H) x 23.3(V) mm () Driver Element a-si TFT active matrix - - Pixel Number 24 x R.G.B x 768 pixel - Pixel Pitch.297(H) x.297(w) mm - Pixel Arrangement RGB vertical Stripe - - Display Colors 6.7M / 262K color - Display Mode Normally Black / VA - - Surface Treatment Hard Coating (3H), Anti-Glare - - Module Power Consumption 2.8 W Max. Version December 27 5 / 29

.5 MECHANICAL SPECIFICATIONS Item Min. Typ. Max. Unit Note Horizontal(H) 326. 326.5 327. mm Module Size Vertical(V) 253. 253.5 254. mm () Depth(D) 8.6 9. 9.6 mm ()(2) Bezel Area Horizontal 37. 37.4 37.

7 .5 MECHANICAL SPECIFICATIONS Item Min. Typ. Max. Unit Note Horizontal(H) mm Module Size Vertical(V) mm () Depth(D) mm ()(2) Bezel Area Horizontal mm - Vertical mm Active Area Horizontal mm Vertical mm Weight - 96 g Note ()Please refer to the attached drawings for more information of front and back outline dimensions. Note (2) The depth is without connector. Version December 27 6 / 29

8 2. ABSOLUTE MAXIMUM RATINGS 2. ABSOLUTE RATINGS OF ENVIRONMENT Item Symbol Value Min. Max. Unit Note Operating Ambient Temperature T OP ()(2)(3) Storage Temperature T ST ()(2)(3) Note () Temperature and relative humidity range is shown in the figure below. Note (2) 9 %RH Max. (Ta < 4 ). Note (3) Wet-bulb temperature should be 39 Max. Version December 27 7 / 29

9 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2. TFT LCD MODULE Value Item Symbol Unit Note Min. Max. Power Supply Voltage VCC V () BACKLIGHT UNIT Item Symbol Value Min. Max. Unit Note Converter Voltage V i V (), (2) Enable Voltage EN V Backlight Adjust Dimming V Note () Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for lamp (Refer to 3.2 for further information). Version December 27 8 / 29

10 3. ELECTRICAL CHARACTERISTICS 3. TFT LCD MODULE Parameter Symbol Value Min. Typ. Max. Power Supply Voltage V CC V - Power Supply Current Ripple Voltage V RP - - mvp-p Rush Current I RUSH A (2) Unit Note White ma (3)a lcc Black ma (3)b LVDS differential input voltage Vid 2-6 mv LVDS common input voltage Vic..2.4 V Differential Input Voltage for LVDS Receiver Threshold H Level V IH - - mv - L Level V IL mv - Terminating Resistor R T - - Ohm - Note ()The module should be always operated within above ranges. Note (2)Measurement Conditions Version December 27 9 / 29

Note (3) The specified power supply current is under the conditions at V DD =3.3V, Ta = 25 ± 2, DC Current and f v = 6 Hz, whereas a power dissipation check pattern below is displayed. 3.

11 Note (3) The specified power supply current is under the conditions at V DD =3.3V, Ta = 25 ± 2, DC Current and f v = 6 Hz, whereas a power dissipation check pattern below is displayed. 3.2 BACKLIGHT UNIT Ta = 25 ± 2 Parameter Symbol Value Min. Typ. Max. Unit Note Converter Power Supply Voltage V i V Converter Power Supply Current I i Vi = 2V (Duty %) Backlight Power Consumption P BL Vi = 2V (Duty %) EN Control Level Backlight on V - Backlight off V PWM Dimming Control PWM High Level V - Level PWM Low Level -.5 V PWM Dimming Control Duty Ratio - - PWM Dimming Control Frequency f PWM 9 2 2k Hz (2) LED Life Time L L 5, 7, - Hrs (3) Note ()LED current is measured by utilizing a high frequency current meter as shown below Note (2) At 2k Hz PWM control frequency,duty ratio range is restricted from 2% to %. Note (3) The lifetime of LED is estimated data and defined as the time when it continues to operate under the conditions at Ta = 25 ±2 and Duty % until the brightness becomes 5% of its original value. Operating LED under high temperature environment will reduce life time and lead to color shift. Version December 27 / 29

12 Power sequence and control signal timing are shown in the following figure Note While system is turned ON or OFF, the power sequences must follow as below descriptions Turn ON sequence Vi(+2V) EN Dimming Turn OFF sequence Dimming EN Vi(+2V) Note (4) Version December 27 / 29

13 4. BLOCK DIAGRAM 4. TFT LCD MODULE Version December 27 2 / 29

14 5. INPUT TERMINAL PIN ASSIGNMENT 5. TFT LCD MODULE Pin No. Symbol Function Polarity Note VCC Power Supply +3.3V(typical) 2 VCC Power Supply +3.3V(typical) 3 NC No Connection (Reserve for INX test) Note (4) 4 LR/UD Reverse Scan Control Note (3) H or NC = Normal Mode. L = Horizonta/ Vertical Reverse Scan. 5 RX- LVDS Differential Data Input Negative 6 RX+ LVDS Differential Data Input Positive 7 GND Ground 8 RX- LVDS Differential Data Input Negative 9 RX+ LVDS Differential Data Input Positive NC No Connection (Reserve for INX test) Note (4) RX2- LVDS Differential Data Input Negative 2 RX2+ LVDS Differential Data Input Positive 3 GND Ground 4 RXCLK- LVDS Differential Data Input Negative 5 RXCLK+ LVDS Differential Data Input Positive 6 GND Ground 7 RX3- LVDS Differential Data Input Negative 8 RX3+ LVDS Differential Data Input Positive 9 NC No Connection (Reserve for INX test) Note (4) 2 SEL68 LVDS 6/8 bit select function control, High 6bit Input Mode Low or NC 8bit Input Mode Note (3) Note () Connector Part No. Cvilux CID52DHR-NH or equivalent. Note (2) User s connector Part No. Hirose DF4-2S-.25C or equivalent. Note (3) Low stands for V. High stands for 3.3V. NC stands for No Connection. Note (4) Pin3, Pin, Pin9 input signals should be set to no connection or ground, this module would operate normally. Version December 27 3 / 29

15 5.2 BACKLIGHT UNIT(Converter connector pin) Pin Symbol Description Remark V i Converter input voltage 2V 2 V GND Converter ground Ground 3 EN Enable pin 3.3V 4 Dimming Backlight Adjust PWM Dimming (Hi 3.3V DC, Lo V DC ) 5 NC Not Connect Note ()Connector Part No. CI425M2HRP-NH (Cvilux) or equivalent. Note (2)User s connector Part No. CI425SL (Cvilux) or equivalent. Version December 27 4 / 29

16 Version December 27 5 / COLOR DATA INPUT ASSIGNMENT The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input the brighter the color. The table below provides the assignment of color versus data input. Color Data Signal Red Green Blue R7 R6 R5 R4 R3 R2 R R G7 G6 G5 G4 G3 G2 G G B7 B6 B5 B4 B3 B2 B B Basic Colors Black Red Green Blue Cyan Magenta Yellow White Gray Scale Of Red Red() / Dark Red() Red(2) Red(252) Red(252) Red(252) Gray Scale Of Green Green()/Dark Green() Green(2) Green(252) Green(252) Green(252) Gray Scale Of Blue Blue() / Dark Blue() Blue(2) Blue(252) Blue(252) Blue(252) Note () Low Level Voltage, High Level Voltage

17 6. INTERFACE TIMING 6. INPUT SIGNAL TIMING SPECIFICATIONS The input signal timing specifications are shown as the following table and timing diagram. Signal Item Symbol Min. Typ. Max. Unit Note LVDS Clock Vertical Display Term Horizontal Display Term Frequency Fc MHz - Period Tc ns Input cycle to cycle jitter T rcl ns (a) Input Clock to data skew TLVCCS -.2*Tc -.2*Tc ps (b) Spread spectrum modulation range F clkin_mod - -.2*Fc MHz Spread spectrum modulation frequency F SSM KHz (c) Frame Rate Fr Hz Tv=Tvd+Tvb Total Tv Th - Active Display Tvd Th - Blank Tvb Tv-Tvd 38 Tv-Tvd Th - Total Th Tc Th=Thd+Thb Active Display Thd Tc - Blank Thb Th-Thd 32 Th-Thd Tc - Note () Because this module is operated by DE only mode, Hsync and Vsync input signals should be set to low logic level or ground. Otherwise, this module would operate abnormally. Note (2) The Tv(Tvd+Tvb) must be integer, otherwise, the module would operate abnormally. INPUT SIGNAL TIMING DIAGRAM Version December 27 6 / 29

18 TIMING DIAGRAM of LVDS Note (a) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T TI Note (b) Input Clock to data skew is defined as below figures. Version December 27 7 / 29

19 Note (c) The SSCG (Spread spectrum clock generator) is defined as below figures. 6.2 POWER ON/OFF SEQUENCE To prevent a latch-up or DC operation of LCD assembly, the power on/off sequence should be as the diagram below. Power ON/OFF sequence Note () Please avoid floating state of interface signal at invalid period. Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD VCC to V. Note (3) The Backlight converter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight converter power must be turned off before the power supply for the logic and the interface signal is invalid. Version December 27 8 / 29

Value Parameter Min Typ Max Units T.5 - ms T2-5 ms T3-5 ms T4 5 - - ms T5 2 - - ms T6 2 - - ms T7 5-3 ms T8 - - ms T9 - - ms T 2 5 ms 6.

20 Value Parameter Min Typ Max Units T.5 - ms T2-5 ms T3-5 ms T ms T ms T ms T7 5-3 ms T8 - - ms T9 - - ms T 2 5 ms 6.3 SCANNING DIRECTION The following figures show the image see from the front view. The arrow indicates the direction of scan. Fig. Normal scan ( pin 4, LR/UD = High or NC ) Fig. 2 Reverse scan (pin 4, LR/UD = Low ) Version December 27 9 / 29

21 7. OPTICAL CHARACTERISTICS 7. TEST CONDITIONS Item Value Unit Ambient Temperature (Ta) 25±2 Ambient Humidity (Ha) 5± %RH Supply Voltage Input Signal LED Light Bar Input Current Per Input Pin 7.2 OPTICAL SPECIFICATIONS According to typical value in "ELECTRICAL CHARACTERISTICS" The relative measurement methods of optical characteristics are shown in 7.2 and all items are measured at the center point of screen except white variation. The following items should be measured under the test conditions described in 7. and stable environment shown in Note (5). Color Chromaticity Item Symbol Condition Min. Typ. Max. Unit Note Red Green Blue White Rx.647 Ry.338 Gx.32 Gy Typ -.66 Bx θ x =, θ Y =.5.57 By CS-T.39 Wx.33 Wy.329 Typ+.5 - (), (5) Center Luminance of White L C 4 5 cd/m 2 (4), (5) Contrast Ratio CR (2), (5) Response Time White Variation Viewing Angle Horizontal Vertical T R θ x =, θ Y = T F δw θ x + θ x =, θ Y = USB2 θ x - CR θ Y + USB ms (3) (5), (6) θ Y Deg. (), (5) Version December 27 2 / 29

22 Note ()Definition of Viewing Angle (θx, θy) Note (2)Definition of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L255 / L L255 Luminance of gray level 255 L Luminance of gray level CR = CR (5) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6). Note (3)Definition of Response Time (TR, TF) Version December 27 2 / 29

Note (4) Definition of Luminance of White (L C ) Measure the luminance of gray level 255 at center point LC = L (5) L (x) is corresponding to the luminance of the point X at Figure in Note (6).

23 Note (4) Definition of Luminance of White (L C ) Measure the luminance of gray level 255 at center point LC = L (5) L (x) is corresponding to the luminance of the point X at Figure in Note (6). Note (5) Measurement Setup The LCD module should be stabilized at given temperature for 2 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 2 minutes in a windless room. Note (6) Definition of White Variation (δw) Measure the luminance of gray level 63 (255) at 9 points Version December / 29

24 8. RELIABILITY TEST CRITERIA Test Item Test Condition Note High Temperature Storage Test 8, 24 hours Low Temperature Storage Test -4, 24 hours (),(2) Thermal Shock Storage Test -3,.5 hour 7,.5 hour; cycles, hour/cycle) (4),(5) High Temperature Operation Test 8, 24 hours Low Temperature Operation Test High Temperature & High Humidity Operation Test ESD Test (Operation) -3, 24 hours 6, RH 9%, 24 hours 5pF, 33Ω, sec/cycle Condition panel contact, ±8 KV Condition 2 panel non-contact ±5 KV (),(2) (4),(6) (), (4) Shock (Non-Operating) 5G, ms, half sine wave, time for ± X, ± Y, ± Z direction (2), (3).5G, ~ 3 Hz sine wave, min/cycle, 3 cycles each Vibration (Non-Operating) (2), (3) X, Y, Z direction Note () There should be no condensation on the surface of panel during test. Note (2) Temperature of panel display surface area should be 9ºC Max. Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification is judged before reliability test. Note (5) Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature. Note (6) Before cosmetic and function test, the product must have enough recovery time, at least 24 hours at room temperature. Version December / 29

25 9. PACKAGING 9. PACKING SPECIFICATIONS () 6pcs LCD modules / Box (2) Box dimensions 5 (L) X 42 (W) X 36 (H) mm (3) Weight approximately 8Kg (6 modules per box) 9.2 PACKING METHOD Figure. 9- Packing method Figure. 9-2 Packing method Version December / 29

26 9.3 UN-PACKING METHOD Figure. 9-3 UN-Packing method Version December / 29

27 . DEFINITION OF LABELS. INX MODULE LABEL The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a)model Name G5XNE -L (b)**** Factory ID (c)serial ID X X X X X X X Y M D X N N N N Serial INX Internal Use Year, Month, Date INX Internal Use Revision INX Internal Use Serial ID includes the information as below (a)manufactured Date Year ~9, for 2~29 Month ~9, A~C, for Jan. ~ Dec. Day ~9, A~Y, for st to 3 st, exclude I, O and U (b)revision Code cover all the change (c)serial No. Manufacturing sequence of product Version December / 29

28 . PRECAUTIONS. ASSEMBLY AND HANDLING PRECAUTIONS ()Do not apply rough force such as bending or twisting to the module during assembly. (2) To assemble or install module into user s system can be only in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) It s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will be damaged. (4) Always follow the correct power sequence when LCD module is connecting and operating. This can prevent damage to the CMOS LSI chips during latch-up. (5) Do not pull the I/F connector in or out while the module is operating. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage LCD module when it is operating. (9) High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. () When ambient temperature is lower than may reduce the display quality. For example, the response time will become slowly. () Do not keep same pattern in a long period of time. It may cause image sticking on LCD..2 SAFETY PRECAUTIONS () Do not disassemble the module or insert anything into the Backlight unit. (2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) After the module s end of life, it is not harmful in case of normal operation and storage. Version December / 29

29 2. MECHANICAL CHARACTERISTICS Version December / 29

30 Version December / 29

31 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact Headquarters Germany FORTEC Elektronik AG Lechwiesenstr Landsberg am Lech Phone sales@fortecag.de Internet Fortec Group Members Austria FORTEC Elektronik AG Office Vienna Nuschinggasse 2 23 Wien Phone office@fortec.at Internet Germany Distec GmbH Augsburger Str. 2b 82 Germering Phone info@distec.de Internet Switzerland ALTRAC AG Bahnhofstraße Würenlos Phone info@altrac.ch Internet United Kingdom Display Technology Ltd. 5 The Oaks Business Village Revenge Road, Lordswood Chatham, Kent, ME5 8LF Phone info@displaytechnology.co.uk Internet www. displaytechnology.co.uk USA Apollo Display Technologies, Corp. 87 Raynor Avenue, Unit Ronkonkoma, NY 779 Phone info@apollodisplays.com Internet

MODEL NO.: G150XNE SUFFIX: L01

MODEL NO.: G150XNE SUFFIX: L01 Tentative Specification Preliminary Specification Approval Specification MODEL NO. G5XNE SUFFIX L Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with your signature