NHD EF-ASXV#

Size: px

Start display at page:

Download "NHD EF-ASXV#"

Annis Carter
5 years ago
Views:

1 NHD EF-ASXV# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD- Newhaven Display Diagonal xRGBx272 Pixels EF- Model A- Built-in Driver / No Controller S- High Brightness, White LED Backlight X- TFT V- MVA Type, Wide Temperature #- RoHS Compliant Newhaven Display International, Inc Galvin Ct. Elgin IL, Ph: Fax: nhtech@newhavendisplay.com nhsales@newhavendisplay.com

2 Document Revision History Revision Date Description Changed by 0 4/29/2014 Initial Release ML 1 6/24/2014 Timing characteristics updated ML 2 8/11/15 Part number changed from ATXV#-3 to ASXV# AK 3 12/21/15 Added Backlight Lifetime Rating, Datasheet Reformat SB 4 11/28/16 Contrast Ratio & Supply Current Updated SB 5 1/6/17 V LED Updated SB 6 3/31/17 Driver IC Updated SB Functions and Features 480xRGBx272 resolution, up to 16.7M colors 12-LED backlight 24-Bit RGB interface Resistive and Capacitive touch panel available [2]

3 K A2 A1 K2 K1 A Mechanical Drawing A B C 67.2±0.2 *45.67±0.5 3±0.2 57±0.2/BEZEL OPENING 56.2±0.3 TOP-POL 0.4± (LCD A.A) (4.18) (31.11) R GB A *18.75± ± ± ±0.2/BEZEL OPENING 98±0.3 TOP-POL 95.04(LCD A.A) TFT 4.3" 480(RGB) X ±0.3 YU XL YD XR 3.5± (52.75) INSULATION TAPE P0.5*39=19.5± ± ±0.3 (5.23) Contact side Rev Description Date Newhaven Display NHD EF-ASXV#_revA 35 NC Notes: DETAIL A 36 GND 1. Display Size: 4.3 TFT 37 D 2. Optimal View: Full View Display Mode: Transmissive / Normally White / Anti-Glare A1 K Driver IC: ST7282T2 Unit 5. Supply Voltage: 3.3 V A2 K2 mm 6. Backlight: White LED / 40mA / 25.6V (Typ) Gen. Tol. Date Part Number: B/L CIRCUIT DIAGRAM 7. Brightness: 850 cd/m² (Typ) ±0.3 03/31/17 NHD EF-ASXV# The information contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] *2.95±0.2 Stiffener 0.3±0.05 PROPRIETARY 25.22±0.5 5± ±0.5 PI Stiffer Pin Assignment PIN SYMBOL LEDK LEDA GND VCC R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 GND CLK DISP Hsync Vsync DEN NC(YU) NC(XL) NC(YD) NC(XR) A B C D

4 Pin Description Pin No. Symbol External Connection Function Description 1 LED- Power Supply Backlight Cathode (Ground) 2 LED+ Power Supply Backlight Anode 40 ma) 3 GND Power Supply Ground 4 V DD Power Supply Supply Voltage for LCD and logic (3.3V) 5-12 [R0-R7] MPU Red Data signals [G0-G7] MPU Green Data signals [B0-B7] MPU Blue Data signals 29 GND Power Supply Ground 30 CLK MPU Data sample Clock signal 31 DISP MPU Display ON/OFF signal 32 HSYNC MPU Line synchronization signal 33 VSYNC MPU Frame synchronization signal 34 DEN MPU Data Enable signal 35 NC - No Connect 36 GND Power Supply Ground 37 NC - No Connect 38 NC - No Connect 39 NC - No Connect 40 NC - No Connect Recommended LCD connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: Backlight connector: on LCD connector Mates with: --- [4]

5 Electrical Characteristics Item Symbol Condition Min. Typ. Max. Unit Operating Temperature Range T OP Absolute Max ⁰C Storage Temperature Range T ST Absolute Max ⁰C Supply Voltage V DD V Supply Current I DD V DD = 3.3V ma H level input V IH * V DD - V DD V L level input V IL - V SS * V DD V Backlight Supply Current I LED ma Backlight Supply Voltage I LED I LED = 40mA ma Backlight Lifetime* - I LED = 40mA T OP = 25 C 20,000 50,000 - Hrs. *Backlight is current driven; do not supply more than 50 ma. Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. Optical Characteristics Item Symbol Condition Min. Typ. Max. Unit Top ϕy ⁰ Optimal Bottom ϕy ⁰ Viewing CR 10 Left θx ⁰ Angles Right θx ⁰ Contrast Ratio CR Luminance L V I LED = 40 ma cd/m 2 Response Time Rise + Fall T R +T F T OP = 25 C ms Red X R Y R Chromaticity Green X G Y G Blue X B Y G White X W Y W * Luminance is directly related to Backlight Supply Current. Driver Information Built-in Sitronix ST7282T2 Driver. Please download specification at [5]

6 Timing Characteristics Parallel RGB input timing requirement Item Symbol Min. Typ. Max. Unit Remark DCLK Frequency FCLK MHz DCLK Period TCLK µs R=10KΩ, 1µF Period Time Th DCLK Display Period Thdisp DCLK HSYNC Back Porch Thbp DCLK By H_Blanking Setting Front Porch Thfp DCLK Pulse Width Thw DCLK Period Time Tv H Display Period Tvdisp H VSYNC Back Porch Tvbp H By V_Blanking Setting Front Porch Tvfp H Pulse Width Tvw H [6]

7 - SYNC Mode Timing [7]

8 - SYNC-DE Mode Timing [8]

9 Input setup timing requirement Item Symbol Min. Typ. Max. Unit Conditions System Operation Timing V DD Power Source Slew Time TPOR ms From 0V to 99% V DD GRB Pulse Width trstw µs R=10KΩ, 1µF Input / Output Timing CLK pulse Duty TCW % Hsync Width Thw DCLK Hsync Period Th µs Vsync setup time Tvst ns Vsync hold time Tvhd ns Hsync setup time Thst ns Hsync hold time Thhd ns Data setup time Tdsu ns Data hold time Tdhd ns SD output stable time Tst µs Output settled within +20mV Loading = 6.8k+28.2pF GD output rise and fall time Tgst µs Output settled (5%~95%) Loading = 4.7k+29.8pF - Clock And Data Input Timing Diagram [9]

10 Power On/Off Sequence - Power On Sequence [10]

11 - Power Off Sequence [11]

12 Quality Information Test Item Content of Test Test Condition Note High Temperature storage Endurance test applying the high storage +80⁰C, 96 Hrs. 2 temperature for a long time. Low Temperature storage Endurance test applying the low storage -30⁰C, 96 Hrs. 1,2 temperature for a long time. High Temperature Operation Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. +70⁰C, 96 Hrs. 2 Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. -20⁰C, 96 Hrs. 1,2 +50⁰C, 90% RH, 96 Hrs. 1,2-20⁰C,60min -> 25⁰C,5min - >70⁰C,60min = 1 cycle 20 cycles 10-50Hz, 15mm amplitude. 30 Min. Each Direction X,Y,Z Air: V S =±8KV, Contact: V S =±4KV R S =330Ω C S =150pF 5 Times Precautions for using LCDs/LCMs See Precautions at Warranty Information See Terms & Conditions at [12]

NHD EF-ASXV#-T

NHD EF-ASXV#-T NHD-4.3-480272EF-ASXV#-T TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD- Newhaven Display 4.3-4.3 Diagonal 480272-480xRGBx272 Pixels EF- Model A- Built-in Driver / No Controller S-