Marine Navigation Aids

Transcription

1 LATERAL T E C H N O L O G Y Marine Navigation Aids Manufactures & Agents for Industrial & Marine Solar Technology Systems, Navigation Aids & Maintenance PLASNAV Buoys PLASNAV Day Marks Marine Beacons Leading Lights Mooring systems Solar jetty lighting Solar panels Batteries Marine lamps Phone: (61 3) , Fax: Mobile: sales@lateraltechnology.com.au Web: Lateral technology 2009

2 NAVIGATION DIVISION PRODUCTS & SERVICES SEALITE (AUS): Navigation Beacons and equipment (Exclusive Vic. Distributor). VEGA (NZ): Navigation Beacons and equipment (Victorian Agent). TIDELAND (USA): Navigation Beacons and equipment. CR CONTROLS (USA): Navigation Beacons and equipment. LATERAL TECHNOLOGY Manufactured: "PLASNAV" Rotor moulded plastic Day Mark System & Accessories (Suits all common Navigation Beacons). LATERAL TECHNOLOGY: "PLASNAV" Rotor moulded Buoys & Tide staffs MARINE LAMPS: All types. SENSON: VPCI marine corrosion inhibitor products. PECAN SOLAR STREET/AREA/JETTY LIGHTING TELEMETRY POLES, Power Supplies, and Equipment INVERTERS: All sizes, types & brands. SOLAR PANELS: distributor for BP Solar, KYOCERA, UniSolar & SHARP BATTERIES: Neuton, Sonnenschein, Concorde & Century Yuasa FLA, SLA, & GEL BATTERY CHARGERS: Including Marine standard. SOLAR REGULATORS: All sizes including special Marine. LATERAL TECHNOLOGY manufactured: SENSTART II" electronic Remote Start & mains failure generator starting systems. WIND GENERATORS: Marine, Commercial & domestic, (inc. for beacons). DESIGN, CONSTRUCTION, INSTALLATION & MAINTENANCE: Lateral Technology, provides sales, spares and maintenance services to all Navigation aids & solar power supplies. Design & construction of Leading & PEL Lights etc. inc. towers, engineering comps etc. Conversion of lights to LED light source, and design and construction of one off specials. Lateral Technology will be happy to design and manufacture custom devices related to any of the above or any other remote power applications. All it needs is some Lateral Technology! All specifications and prices in this catalogue subject to change without notice. Phone: (03) Fax: (03) Mobile: Web: Lateral Technology 2009

3 PLASNAV BUOYS ALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS Starboard Hand Buoy DIMENSIONS: 1 Mtr. Diameter x 1900 mm. LOA. Available with or without ballast, spin weld fitting in top for pouring ballast 280-mm. Diameter top flange with cast in Beacon mounting holes. Moulded in Stainless steel becket, c/w 316 stainless shackle. Available in any standard colour. Available with Sealite SL70 Navigation Beacons Model shown: - CODE: LT-SB (G) Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

4 PLASNAV BUOYS ALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS PORT HAND BUOY DIMENSIONS: 1000 mm. Diameter mm. body height (1850 mm. LOA.) Internal capacity 750 litres Top flange with cast in industry standard Beacon mounting holes. Moulded in Stainless steel becket, c/w 22 mm. 316 stainless bowe shackle. Available with or without ballast or D.Y.I ballast. Available with Sealite SL70 Navigation Beacons MODEL CODE: LT-PB (R) Phone: (03) Fax: (03) Mobile: Web: Lateral Technology 2009

5 PLASNAV BUOYS ALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS 5/10 Knot (yellow) or No Boating Buoy (red) DIMENSIONS: 1 Mtr. Diameter x 1600 mm. LOA. 280-mm. Diameter top flange with cast in Beacon mounting holes. Moulded in Stainless steel becket, c/w 22 mm. 316 stainless shackle, and hydrophobic valve. Available in any standard colour with or without graphics. Mould in graphics to specification. Available with Sealite SL70 Navigation Beacons. Able to support large chain sizes reducing maintenance costs significantly. Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

6 PLASNAV BUOYS ALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS Marine Park Marker Buoy DIMENSIONS: 1 Mtr. Diameter x 1600 mm. LOA. 280-mm. Diameter top flange with cast in Beacon mounting holes. Moulded in Stainless steel becket, c/w 16 mm. 316 stainless shackle. Available in any standard colour. Mould in graphics to specification. Available with Sealite SL70 Navigation Beacons Model shown: - CODE: LT-PVMP (Y) Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

7 PLASNAV BUOYS ALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS Cardinal Buoys DIMENSIONS: 1 Metre. Diameter x 2.2 Metres above water line. 5 Metres. O.A. Length. C/W Top Marks & counterweight. All 316 stainless steel shaft & fittings. Available with Sealite SL70 Navigation Beacons & mounting plate to suit. MODEL CODE: LT-CB (N), (S), (E), or (W), Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

8 PLASNAV BUOYS ALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS IALA Special Mark DIMENSIONS: 1 Metre. Diameter, Beacon 2.2 Metres above water line. 5 Metres. O.A. Length. All stainless 316 construction C/W Top Marks & counterweight Available with Sealite SL70 Navigation Beacons & mounting plate to suit. Model shown: - CODE: LT-SM (Y) Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

9 PLASNAV Day Mark System Specification Sheet. CODE: LTDM S/H(G) STARBOARD HAND MARK (GREEN) Dimensions: Diameter 1 Mtr. x 600 mm. High. 100 mm. Aluminium central reinforcing tube with Industry standard pattern flanges both ends. (accepts all common Navigation Beacons) (Shown with 350 mm. Sealite Beacon mount, and 450 mm. industry standard bolt pattern extension. CODE: LT-DM P/H(R) PORT HAND MARK (RED) Dimensions: 800 mm. Diameter 850 mm. High. (1000 mm. LOA. 100 mm. Aluminium central reinforcing tube with Industry standard pattern flanges both ends. (accept all common Navigation Beacons) (Shown with 350 mm. Sealite Beacon mount, CODE: LTDM C/M(B) CARDINAL MARKS (BLACK) Dimensions: 2.46 Mtrs LOA.. Diameter 1 Mtr. 100 mm. Aluminium central reinforcing tube with Industry standard pattern flanges both ends. Flanges 250 mm. Diameter, (accepts all common Navigation Beacons) (Shown with 350 mm. Sealite Beacon mount, and 450 mm. Tideland/Tideland extension. Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

10 PLASNAV ROTOR MOULDED PILE CAPS Manufactured from quality polyethylene for long service life. UV resistant long life high visibility colours. Other colours available on request. 3M Reflective pile banding available on request. MODEL PORT HAND PILE CAP LT-PC (R) 450 mm. inside diameter) STARBOARD HAND PILE CAP LT- PC (G) 450 mm. inside diameter) SPECIAL MARK PILE CAP LT-PC (Y) 450 mm. inside diameter) PILE CAP LT-PC (W) 450 mm. inside diameter) PILE CAP LT- FTPC (colour) 560 mm. inside diameter. Flat top pile cap (checker plate pattern) 3M Diamond grade reflective pile banding COLOURS RED GREEN YELLOW WHITE ALL COLOURS As required Phone: (03) Fax: (03) Mobile: Web: Lateral Technology 2009

11 PLASNAV BUOYS ALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS Isolated Danger Buoy DIMENSIONS: 1 Metre Diameter x 5 Metres O.A. length. Beacon 2.2 Metres above water line. C/W Top Marks & counterweight Available with Sealite SL70 Navigation Beacons & mounting plate to suit. Model shown: - CODE: LT- ID (R&B) Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

12 SL15 1nm Solar Marine Light This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 New Feature Now available with user-adjustable flash settings Bird deterrent spike LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) 4 ultra-high intensity LEDs Internal solar module Automatic night activation Lens and base moulded from UV-stabilised LEXAN polycarbonate Internal user-replaceable battery in sealed compartment (IP68 rating) Internal user-adjustable flash settings The Sealite Advantage User-adjustable flash characters User-replaceable battery in sealed battery compartment NiMH battery for long service life & wide temperature range Completely sealed & selfcontained using ultrasonic welding techniques Installs in minutes & operates maintenancefree for up to five years IP68 waterproof The Sealite SL15 1nm compact LED light is exceptional value and incorporates some of the most advanced technology available. In the tradition of Sealite lanterns, the SL15 is designed to be maintenance-free and have a service life of over 5 years. The SL15 can be installed in minutes, and requires no operator intervention. The flash characters are user-adjustable, and the unit is supplied ready for immediate installation. During daylight hours the solar module will charge the battery, and the lantern will automatically begin operation at dusk once the ambient light threshold drops sufficiently. The SL15 features the Sealite LED 360 Omnidirectional Reflector, which increases the intensity and uniformity of the horizontal output. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike deterring unwelcome bird life. The unit is sealed using an advanced ultrasonic weld, enabling a rugged and completely waterproof seal capable of prolonged and deep immersion (IP68). Optional ON/OFF Switch (SL15-SW) The SL15 is also available with an optional ON/OFF switch for temporary installations such as worksites. SL15 solar light on FAD, Australia SL15 marina lights, Vigo, Spain

13 SL15 1nm Solar Marine Light User replaceable battery Marine Buoys SL15 with optional ON/OFF switch (SL15-SW) SPECIFICATIONS Light Characteristics Light Source 4 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red Green White Yellow Visible Range (nm) >1 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics 16 user-adjustable IALA flash characteristics (other flash patterns available on request) Intensity Adjustments 100% as standard (custom intensity available on request) LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) Minimal Circuit Protection Integrated Nominal Voltage (v) 3.6 Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 0.45 Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type High grade NiMH - Environment friendly Battery Capacity (Ah) 1.6 Nominal Voltage (v) 3.6 Battery Service Life Average 5 years Physical Characteristics Body Material LEXAN Polycarbonate UV-stabilised Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 107 / 4 1 / 4 Lens Design External optics with interior flute design Mounting 4 x 6mm mounting holes Height (mm/inches) 141 / 5 1 / 2 Width (mm/inches) 136 / 5 3 / 8 Mass (kg/lbs) 0.6 / 1 / 3 Product Life Expectancy Up to 12 years Certifications CE EN :1997. EN :1997 Quality Assurance ISO9001:2000 Waterproof IP68 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Full 3 years Options Available ON/OFF switch (SL15-SW) Custom flash patterns 50mm pole mount adaptor plate FLASH SETTING CODE USER-ADJUSTABLE FLASH PATTERNS 0 Flash Sequence (on, off, on ) STEADY LIGHT (intensity reduced) 1 0.5, , , , , , 0.7, 0.3, 0.7, 6 0.3, 0.7, 0.3, , , , 2.0 A 0.3, 2.7 B 0.5, 2.5 C 0.7, 2.3 D 0.5, 4.5 E Custom Setting Other flash patterns are available on request Specifications subject to change or variation without notice Subject to standard terms and conditions *

14 SL15 1nm Solar Marine Light User replaceable battery SL15 with optional ON/OFF switch (SL15-SW) SPECIFICATIONS Light Characteristics Light Source 4 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red Green White Yellow Visible Range (nm) >1 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics 16 user-adjustable IALA flash characteristics (other flash patterns available on request) Intensity Adjustments 100% as standard (custom intensity available on request) LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) Minimal Circuit Protection Integrated Nominal Voltage (v) 3.6 Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 0.45 Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type High grade NiMH - Environment friendly Battery Capacity (Ah) 1.6 Nominal Voltage (v) 3.6 Battery Service Life Average 5 years Physical Characteristics Body Material LEXAN Polycarbonate UV-stabilised Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 107 / 4 1 /4 Lens Design External optics with interior flute design Mounting 4 x 6mm mounting holes Height (mm/inches) 141 / 5 1 /2 Width (mm/inches) 136 / 5 3 /8 Mass (kg/lbs) 0.6 / 1 /3 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof EN :1997. EN :1997 ISO9001:2000 IP68 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years ON/OFF switch (SL15-SW) Custom flash patterns 50mm pole mount adaptor plate FLASH SETTING CODE USER-ADJUSTABLE FLASHPATTERNS Flash Sequence (on, off, on...) STEADY LIGHT 0 (intensity reduced) 1 0.5, , , , , , 0.7, 0.3, 0.7, 0.3, 0.7, 0.3, , , , 2.0 A 0.3, 2.7 B 0.5, 2.5 C 0.7, 2.3 D 0.5, 4.5 E Custom Setting Other flash patterns are available on request Specifications subject to change or variation without notice * Subject to standard terms and conditions

15 SL60 2nm Solar Marine Light This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 Bird deterrent spike Large internal solar module 6 ultra-high intensity LEDs LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Shown with optional 200mm OD base pattern (SL60-LB) Lens and base moulded from UV-stabilised LEXAN polycarbonate Automatic night activation Internal user-replaceable battery in sealed compartment (IP68 rating) The Sealite Advantage 256 IALA flash patterns, user-adjustable without the need for external devices User-replaceable battery in sealed battery compartment NiMH battery for long service life & wide temperature range 4 user-adjustable intensity settings ON/OFF storage switch IP68 waterproof The Sealite SL60 is the world s most popular and versatile 2nm solar marine light. Made from tough, durable polycarbonate and using the latest high intensity LED s, no expense has been spared in the design and development of this lantern. The SL60 can be installed in minutes, and requires no operator intervention. The flashcharacters are easily adjusted on-site by the user, and the lantern has a permanent ON/ OFF switch for easy storage. During daylight hours the solar module will charge the battery, and the lantern will automatically begin operation at dusk once the ambient light threshold drops sufficiently. The SL15, SL60 and SL70 lanterns are the only compact marine lanterns available with a sealed battery compartment, allowing the battery to be replaced after years of service don t throw the light away at the end of the battery service life. The unit is sealed using polycarbonate bonding compounds similar to those used by major automobile manufacturing companies. SL60 mounted on Sealite Aquafloat buoy, Manila, Philippines SL60 s marking gas transfer lines, Guajira Peninsula, Colombia

16 SL60 2nm Solar Marine Light Standard Base User replaceable battery Optional 200mm OD Base SPECIFICATIONS Light Characteristics Light Source 6 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red Green White Yellow Visible Range (nm) >2 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) Minimal Circuit Protection Integrated Nominal Voltage (v) 3.6 Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 1.4 Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type High grade NiMH - Environment friendly Battery Capacity (Ah) 4 Nominal Voltage (v) 3.6 Battery Service Life Average 5 years Physical Characteristics Body Material LEXAN Polycarbonate UV-stabilised Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 4 x 4.5mm mounting holes Height (mm/inches) 205 / 8 1 /8 Width (mm/inches) 177 / 7 Mass (kg/lbs) 1.1 / 2 3 /8 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof Intellectual Property EN :1997. EN :1997 ISO9001:2000 IP68 Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years 8Ah battery (SL60/8Ah) 200mm OD base (SL60-LB) Hard-wire synchronisation 50mm pole mount adaptor plate * Subject to standard terms and conditions Specifications subject to change or variation without notice

17 SL70 2nm Solar Marine Light This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 New Automatic night activation Dual internal high-performance solar modules Now available with optional Comm-Synch or Radio Control 6 ultra-high intensity LEDs Lens and base moulded from UV-stabilised LEXAN polycarbonate LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Large industry standard 200mm OD base pattern for ease of installation Internal userreplaceable battery in sealed compartment (IP68 rating) The Sealite Advantage Reliable year-round operation in low sunlight conditions 256 IALAflash patterns, user-adjustable without the need for external devices User-replaceable battery in sealed battery compartment NiMH battery for long service life & wide temperature range 4 user-adjustable intensity settings ON/OFF storage switch IP68 waterproof The SL70 is exceptional in it s unique ability to be able to track the sun and operate reliably in low sunlight conditions. The SL70 has been proven to operate as a 2-mile compact buoy lantern in various low-sunlight environments such as Britain, Canada, and Europe. Made from tough, durable polycarbonate and using the latest high intensity LED s, the SL70 lantern boasts dual high-performance solar modules incorporated into Sealite s world-first Solar Collection Lens. These solar modules are angled to obtain maximum sunlight capture, allowing the unit to operate reliably in a range of low sunlight environments. The SL70 can be installed in minutes, and requires no operator intervention. The flash-characters are easily adjusted on-site by the user, and the lantern has a permanent ON/OFF switch for easy storage. The sealed battery compartment allows the battery to be replaced after years of service don t throw the light away at the end of the battery service life. Sealite s SL70 solar marine light has been awarded the prestigious Australian DesignMark at the Australian Design Awards; a testament of Sealite s commitment to the ongoing development of state-of-the-art products. Optional RF Communication Synchronisation (SL70-CS) The SL70 is now available with optional short-range RF communication synchronisation. Two (2) or more lights can be synchronised to flash in unison via an internal RF module - ideal for rivers, marina entrances, channel marking and aquaculture. Optional 12 LED Light Configuration (SL70-12) In high sunlight regions the SL70 may be fitted with 12 LED s and appropriate intensity settings to provide a range of >3 nautical miles (colour dependant). RF Comm-Synch SL70 Lanterns Internal RF Module

18 SLC310 Compact 3nm Solar Marine Lantern This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part ultra-high intensity LEDs High visibility IALA colours LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available with internal GPS synchronisation 4 x 2watt multicrystalline solar modules, ensuring maximum light collection to charge the battery 200mm OD base pattern for ease of installation Internal 12Ah battery (IP68 rating) The Sealite Advantage 200mm OD base pattern for immediate installation on existing structures User-replaceable battery 256 IALA flash patterns, user-adjustable without the need for external devices Tempered glass solar modules for peak efficiency Automatic night activation IP68 waterproof The SLC310 is a robust completely self-contained 3nm Solar LED Marine Lantern designed to fit directly onto existing 200mm OD industry standard mounts. The unit is made from cast aluminium, subject to 7-stage powder-coating in high visibility IALA colours for daytime recognition. Four (4) premium-grade solar modules are integrated into the assembly, and mounted to collect sunlight at all angles. The SLC310 is IP68 waterproof - designed specifically to endure a wide range of harsh marine environmental conditions including continual immersion. The solar array charges an internal 12Ah battery during daylight hours, and at dusk the light will automatically begin operation. The unit is capable of producing any of 256 IALA recommended flash characters - field-adjustable without the need for ancillary equipment. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life. Optional GPS Synchronisation (SLC310-GPS) Sealite s SLC310 is also available with optional GPS synchronisation enabling users to clearly mark channels, ports, rivers and entrances, marinas, aquaculture installations and exclusion zones with independent lanterns which flash in synchronisation. When lanterns flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting.

19 SLC310 Compact 3nm Solar Marine Lantern Convenient user-replaceable battery SPECIFICATIONS Light Characteristics Light Source 20 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red Green White Yellow - 26 Visible Range (nm) >3 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) 100,000 Electrical Characteristics Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) 20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 8 (4 x 2watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 12 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material 7-stage powder-coated aluminium Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 107 / 4 1 /4 Lens Design External optics with interior flute design Mounting 200mm OD base pattern Height (mm/inches) 374 / 14 3 /4 Width (mm/inches) 245 / 9 2 /3 Mass (kg/lbs) 6.4 / 14 1 /8 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof Intellectual Property EN :1997. EN :1997 ISO9001:2000 IP68 Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years GPS synchronisation (SLC310-GPS) * Subject to standard terms and conditions Specifications subject to change or variation without notice

20 SLC420 Compact 4nm Solar Marine Lantern This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 New 36 ultra-high intensity LEDs LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Now available with optional Comm-Synch or Radio Control High visibility IALA colours 4 x 5watt multicrystalline solar modules, ensuring maximum light collection to charge the battery 200mm OD base pattern for ease of installation Internal 20Ah battery The Sealite Advantage 200mm OD base pattern for immediate installation on existing structures User-replaceable battery 256 IALA flash patterns, user-adjustable without the need for external devices Tempered glass solar modules for peak efficiency Automatic night activation Vertical light emissions to maintain visibility when passing adjacent to light The SLC420 is a robust completely self-contained 4nm Solar LED Marine Lantern designed to fit directly onto existing 200mm OD industry standard mounts and incorporates a 36 LED light source for even greater light intensity. The unit is made from cast aluminium, subject to 7-stage powder-coating in high visibility IALA colours for daytime recognition. Four (4) premium-grade solar modules are integrated into the assembly, and mounted to collect sunlight at all angles. The solar array charges the 20Ah battery during daylight hours, and at dusk the light will automatically begin operation. The unit is capable of producing any of 256 IALA recommended flash characters - field-adjustable without the need for ancillary equipment. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life. Optional GPS Synchronisation (SLC420-GPS) The SLC420 is also available with optional GPS synchronisation enabling users to clearly mark channels, ports, rivers and entrances, marinas, aquaculture installations and exclusion zones with independent lanterns which flash in synchronisation. When lanterns flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting. Optional GSM Remote Monitoring (SLC420-GSM) The SLC420 may also be fitted with GSM remote monitoring capabilities- enabling users to access real-time diagnostic data remotely via Cell-phone or PC integration. RF Comm-Synch SLC420 Lanterns SLC420 s mounted on SLB1250 Navigation Buoys, Pasig River, Manila, Philippines Internal RF Module

21 SLC420 Compact 4nm Solar Marine Lantern Convenient user-replaceable battery SPECIFICATIONS Light Characteristics Light Source 36 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) >60 Visible Range (nm) >4 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) >15 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 20 (4 x 5watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 20 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material 7-stage powder-coated aluminium Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 200mm OD base pattern Height (mm/inches) 530 / 20 7 /8 Width (mm/inches) 245 / 9 2 /3 Mass (kg/lbs) 8.5 / 18 3 /4 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Intellectual Property EN :1997. EN :1997 ISO9001:2000 Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years GPS (SLC420-GPS) or RF communication (SLC420-CS) synchronisation Remote monitoring (via GSM cell-phone- SLC420-GSM) or control (via radio- SLC420-RC) capabilities Note - remote monitoring/control will reduce visible range of lantern due to increased power consumption * Subject to standard terms and conditions Specifications subject to change or variation without notice

22 SLC400 Compact 4nm Solar Marine Lantern This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 SL125-1 light-head (36 ultra-high intensity LEDs. IP68 rating) LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available with internal GPS synchronisation or GSM Cell-phone Monitoring High visibility IALA colours 4 x 5watt multicrystalline solar modules, ensuring maximum light collection to charge the battery Rotationally moulded UV-stabilised virgin polyethylene body Internal 26Ah battery The Sealite Advantage Complete unit - ready for immediate installation Impact & weather resistant polyethylene 256 IALA flash patterns, user-adjustable without the need for external devices Tempered glass solar modules for peak efficiency Automatic night activation Vertical light emissions to maintain visibility when passing adjacent to light The SLC400 is a completely self-contained 4nm Solar LED Marine Lantern designed for a range of low-maintenance applications. The light boasts a large internal waterproof battery compartment, a 36 LED flasher unit, and 4 premium-grade 5watt solar modules mounted to collect sunlight at all angles. The SLC400 is moulded from UV-stabilised virgin polyethylene, providing enormous impact and weather resistance, in addition to high visibility IALA colours. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life. The user-friendly 2-piece design allows the lantern to be opened for convenient battery inspection or replacement whilst the base remains fixed to the supporting structure. Optional GPS Synchronisation (SLC400-GPS) The SLC400 is also available with optional GPS synchronisation enabling users to clearly mark channels, ports, rivers and entrances, marinas, aquaculture installations and exclusion zones with independent lanterns which flash in synchronisation. When lanterns flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting. Optional GSM Remote Monitoring (SLC400-GSM) The SLC400 may also be fitted with GSM remote monitoring capabilities- enabling users to access real-time diagnostic data remotely via Cell-phone or PC integration. SLC400 installed in Denmark

23 SLC400 Compact 4nm Solar Marine Lantern Convenient battery replacement SPECIFICATIONS Light Characteristics Light Source SL125-1 (36 LED lantern as standard) Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) >60 Visible Range (nm) >4 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) >30 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 20 (4 x 5watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 26 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material Rotationally moulded UV-stabilised virgin polyethylene Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 4 x 11mm mounting holes Height (mm/inches) 505 / 19 7 /8 Width (mm/inches) 495 / 19 1 /2 Mass (kg/lbs) 17 / 37 3/8 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof EN :1997. EN :1997 ISO9001:2000 IP68 light-head Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years 200mm OD mounting plate Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SLC400-GSM) Note - remote monitoring will reduce visible range of lantern due to increased power consumption * Subject to standard terms and conditions Specifications subject to change or variation without notice

24 SLC500 Compact 5nm Solar Marine Lantern This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 SL125-2 light-head (72 ultra-high intensity LEDs. IP68 rating) High visibility IALA colours LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available with internal GPS synchronisation or GSM Cell-phone Monitoring Rotationally moulded UV-stabilised virgin polyethylene body 4 x 10watt multicrystalline solar modules, ensuring maximum light collection to charge the battery Internal 55Ah battery The Sealite Advantage Complete unit - ready for immediate installation Impact & weather resistant polyethylene 256 IALA flash patterns, user-adjustable without the need for external devices Tempered glass solar modules for peak efficiency Automatic night activation Vertical light emissions to maintain visibility when passing adjacent to light The SLC500 is a completely self-contained 5nm Solar Marine Lantern designed for a range of low-maintenance applications. The light boasts a large internal battery compartment, a multiple tiered SL125 LED lighthead, and 4 premium-grade 10watt solar modules mounted to collect sunlight at all angles. The SLC500 is moulded from UV-stabilised virgin polyethylene, providing enormous impact and weather resistance, in addition to high visibility IALA colours. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life. The user-friendly 2-piece design allows the lantern to be opened for convenient battery inspection or replacement whilst the base remains fixed to the supporting structure. Optional GPS Synchronisation (SLC500-GPS) The SLC500 is also available with optional GPS synchronisation enabling users to clearly mark channels, ports, rivers and entrances, marinas, aquaculture installations and exclusion zones with independent lanterns which flash in synchronisation. When lanterns flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting. Optional GSM Remote Monitoring (SLC500-GSM) The SLC500 may also be fitted with GSM remote monitoring capabilities- enabling users to access real-time diagnostic data remotely via Cell-phone or PC integration.

25 SLC500 Compact 5nm Solar Marine Lantern Convenient battery replacement SPECIFICATIONS Light Characteristics Light Source SL125-2 (72 LED lantern as standard) Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) >150 Visible Range (nm) >5 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) 30 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 40 (4 x 10watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 55 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material Rotationally moulded UV-stabilised virgin polyethylene Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 4 x 11mm mounting holes Height (mm/inches) 806 / 31 3 /4 Width (mm/inches) 560 / 22 Mass (kg/lbs) 19 / 41 3 /4 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof Intellectual Property EN :1997. EN :1997 ISO9001:2000 IP68 light-head Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years 200mm OD mounting plate Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SLC500-GSM) Note - remote monitoring will reduce visible range of lantern due to increased power consumption * Subject to standard terms and conditions Specifications subject to change or variation without notice

26 SLC600 Compact 6nm Solar Marine Lantern This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 SL125-4 light-head (144 ultra-high intensity LEDs. IP68 rating) LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Rotationally moulded UV-stabilised virgin polyethylene body 4 x 20watt multicrystalline solar modules, ensuring maximum light collection to charge the battery Available with internal GPS synchronisation or GSM Cell-phone Monitoring High visibility IALA colours Internal 80Ah battery The Sealite Advantage Complete unit - ready for immediate installation Impact & weather resistant polyethylene 256 IALA flash patterns, user-adjustable without the need for external devices Tempered glass solar modules for peak efficiency Automatic night activation Vertical light emissions to maintain visibility when passing adjacent to light The SLC600, the world s largest self-contained LED lantern, is a 6nm Solar LED Marine Lantern designed for a range of low-maintenance applications. The light boasts a large internal battery compartment, a multiple tiered SL125 LED lighthead, and 4 premium-grade 20watt solar modules mounted to collect sunlight at all angles. The SLC600 is moulded from UV-stabilised virgin polyethylene, providing enormous impact and weather resistance, in addition to high visibility IALA colours. The user-friendly 2-piece design allows the lantern to be opened for convenient battery inspection or replacement whilst the base remains fixed to the supporting structure. Optional GPS Synchronisation (SLC600-GPS) The SLC600 is also available with optional GPS synchronisation enabling users to clearly mark channels, ports, rivers and entrances, marinas, aquaculture installations and exclusion zones with independent lanterns which flash in synchronisation. When lanterns flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting. Optional GSM Remote Monitoring (SLC600-GSM) and AIS Integration (SLC600-AIS) The SLC600 may also be fitted with GSM or AIS remote monitoring systems - enabling users to access real-time diagnostic data remotely. AIS integration also enables crucial Message 21 information to be broadcast to mariners within the region. SLC600 AIS enabled lantern, Port of Lagos, Nigeria The light-head of the SLC600 may be fitted with up to 4 tiers of LEDs, enabling up to 7nm visible range. In addition, the large power system allows multiple ancillary equipment to be included in the assembly including monitoring and Automatic Identification Systems (AIS).

27 SLC600 Compact 6nm Solar Marine Lantern Convenient battery replacement SPECIFICATIONS Light Characteristics Light Source SL125-4 (144 LED lantern as standard) Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) >250 Visible Range (nm) >6 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) 20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 80 (4 x 20watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 80 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material Rotationally moulded UV-stabilised virgin polyethylene Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 4 x 11mm mounting holes Height (mm/inches) 980 / 38 5 /8 Width (mm/inches) 560 / 22 Mass (kg/lbs) 31 / 68 1 /4 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof Intellectual Property EN :1997. EN :1997 ISO9001:2000 IP68 light-head Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years 200mm OD mounting plate Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SLC600-GSM or AIS) Note - remote monitoring will reduce visible range of lantern due to increased power consumption * Subject to standard terms and conditions Specifications subject to change or variation without notice

28 SL50 / SL52 3-4nm Self-Contained Marine Lanterns This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 Available with internal GPS synchronisation LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) SL50- with single 5watt solar module SL52- with dual 5watt solar modules Bird deterrent spike 20 ultra-high intensity LEDs User-replaceable 4.5Ah battery in 7-stage powder-coated aluminium housing Adjustable 5watt solar modules(s) angled to maximise solar collection Available with optional 200mm OD mounting plate The Sealite Advantage Impact resistant battery housing >10 day autonomy Interchangeable 20 LED flasher unit & replaceable lens assembly 256 IALA flash patterns, user-adjustable without the need for external devices Automatic night activation Sealite s 3-4 nautical mile lanterns represent a traditional approach to marine navigation, combined with advantages of LED technology. Boasting large, accessible battery compartments, inter-changeable 20 LED flasher units, and large external solar modules, the lanterns are ideal for heavy-duty conditions. The models are available in a variety of solar/battery configurations for various latitudes and duty cycles, and are fitted with either a single solar module for fixed installations, or dual solar modules for buoy mounting, allowing the unit to collect solar radiation as the buoy swings. The lens assembly can be easily removed for access to the LED flasher unit. The polycarbonate lens is bonded using an ultra-sonic weld to a moulded circular ring. The ring is then fastened to the aluminium attachment plate using 316-grade stainless fasteners, providing a lifetime bond without the use of bonding compounds. Sealite s SL50 is fitted with a single 5watt solar module, while the SL52 model is fitted with dual 5watt panels, and 4.5Ah SLA battery, allowing the unit to operate reliably with higher duty cycles or in lower sunlight regions. The SL50 and SL52 lanterns have been widely adopted by professionals in the marine sector, including ports and harbours, transport departments and coast guards. The lanterns are covered by the Sealite full 3 year warranty, and all components are replaceable, and can be purchased individually in the unlikely event of damage to the unit. Once installed, no operator intervention is required to operate the self-contained lantern. During daylight hours the solar modules will charge the battery through an advanced switch-mode regulator incorporated into the flasher unit. The lantern will automatically begin operation at dusk once the ambient light threshold drops sufficiently. Flash synchronisation is available via hard-wire. Lens assembly Pasig River Rehabilitation Project, Manila, Philippines Interchangeable Digital Flasher unit

29 SL50 / SL52 3-4nm Self-Contained Marine Lanterns SL50 SL52 SPECIFICATIONS Light Characteristics Light Source 20 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red - 47 Green - 47 White - 90 Yellow - 32 Visible Range (nm) >3 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) 180 (nominal) Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) >10 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) SL50: 5 (1 x 5watt) SL52: 10 (2 x 5watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 4.5 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material 7-stage powder-coated aluminium Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 107 / 4 1 /4 Lens Design External optics with interior flute design Mounting 50mm OD pole Height (mm/inches) 466 / 18 1 /3 Width (mm/inches) SL50: 385 / 15 1 /4 SL52: 642 / 25 1 /3 Mass (kg/lbs) SL50: 4 / 8 3 /4 SL52: 4.5 / 9 7 /8 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance EN :1997. EN :1997 ISO9001:2000 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years 200mm OD mounting plate Hard-wire synchronisation * Subject to standard terms and conditions Specifications subject to change or variation without notice

30 SL23 / SL24 and SL23.5 / SL nm Self-Contained Marine Lanterns This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 Bird deterrent spike 20 ultra-high intensity LEDs LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available with internal GPS synchronisation Adjustable 10 or 5watt solar module(s) angled to maximise solar collection User-replaceable 7.5Ah battery in 7-stage powder-coated aluminium housing SL24.5- with dual 5watt solar modules Available with optional 200mm OD mounting plate SL23- with single 10watt solar module The Sealite Advantage Impact resistant battery housing >20 day autonomy Interchangeable 20 LED flasher unit & replaceable lens assembly 256 IALA flash patterns, user-adjustable without the need for external devices Automatic night activation Sealite s 3-4 nautical mile lanterns incorporate the latest advancements in LED technology. The internal 20 LED flasher unit is interchangeable between lanterns, allowing the operator to replace the flasher unit with another colour at any stage of the product s life. The 20 LED flasher unit is also equipped with 2 rotary switches, allowing the user to change the flash characteristics of the light at any stage. An easy DIP switch arrangement means the light can be set to any of 4 intensity settings - for differing duty cycles and applications. The SL23 and SL24 model lanterns are the workhorse of the self-contained lantern range, and are specifically designed to operate reliably in a range of low sunlight regions, or as steady-on lights. The large 7.5Ah battery provides 20 day autonomy, and the 12watt solar module(s) provide sufficient charge in all seasons. The lanterns are used extensively by marine departments throughout Canada, Britain, Europe and the United States. Flash synchronisation is available via hard-wire. Lens assembly Sealite SL23 marine lights mark the famous Sunshine Skyway Bridge, Tampa, Florida Interchangeable Digital Flasher unit

31 SL23 / SL24 and SL23.5 / SL nm Self-Contained Marine Lanterns SL23 SL24 SPECIFICATIONS SL23.5 SL24.5 Light Characteristics Light Source 20 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red - 47 Green - 47 White - 90 Yellow - 32 Visible Range (nm) >3 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) 180 (nominal) Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) SL23: 1 2 (1 x 10watt) SL23.5: 5 (1 x 5watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 7.5 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material 7-stage powder-coated aluminium Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 107 / 4 1 /4 Lens Design External optics with interior flute design Mounting 50mm OD pole Height (mm/inches) SL23: 3 87 / 15 1 / 4 SL23.5: 334/ 13 1 /8 Width (mm/inches) SL23: 2 78 / 10 7 / 8 SL23.5: 254 / 10 Mass (kg/lbs) SL23: 7 / 15 3 / 8 SL23.5: 6.5 / 14 1 /3 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance EN :1997. EN :1997 ISO9001:2000 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years 200mm OD mounting plate Hard-wire synchronisation Specifications subject to change or variation without notice * Subject to standard terms and

32 LATERAL T E C H N O L O G Y Marine Navigation Aids The LTM LateralTechnology Sealite/Tideland adapter is available for mounting Sealite SL50 & SL52 to existing or new structures or Buoys. Manufactured from marine, alloy TIG welded and seven stage powdercoated. Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009

33 SL125/C 5-7nm Complete Marine Lantern Assembly This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 New Now available with optional Comm-Synch or Radio Control LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Bird deterrent spike Lens moulded from UV-stabilised LEXAN polycarbonate (IP68 rating) Adjustable solar module(s) angled to maximise solar collection Large industry standard 200mm OD base pattern User-replaceable 26Ah battery in 7-stage powder-coated aluminium housing (IP66) The Sealite Advantage Complete lantern assembly SL125 light-head available with up to 4 tiers of ultrahigh intensity LEDs (36 LEDs per tier) for increased light intensity 256 user-adjustable flash characteristics 4 adjustable intensity settings Impact resistant battery housing Automatic night activation IP68 light head & IP66 battery housing Vertical light emissions to maintain visibility when passing adjacent to light The SL125/C Complete Lantern Assembly provides a complete solution for visual navigation requirements. The SL125/C offers unique flexibility, and is available in varying configurations to suit a range of installation and intensity requirements. The powder-coated 3mm aluminium housing is laser-cut, and robotically folded for guaranteed precision every time. One or two 20watt solar module(s) are fitted as standard, and the unit can be readily equipped with up to two individual 40watt modules to power longer-range requirements or ancillary equipment. A modular design, all components of the system are replaceable in the unlikely event of damage to the unit. The battery is accessed through the top of the lantern assembly, via a robust swing-hinge. Access to the user-adjustable flash and intensity settings is also achieved through this design. The solar modules are extendable to 51 degrees as standard, with the option to increase in equatorial regions. SL125-1/C-1 SL125-1/C-2 SL125-2/C-1 SL125-2/C-2 SL125-3/C-1 SL125-3/C-2 SL125-4/C-1 SL125-4/C-2 SL125 1-Tier. Complete Lantern Assembly. Single 20w Solar Module. SL125 1-Tier. Complete Lantern Assembly. Dual 20w Solar Modules. SL125 2-Tier. Complete Lantern Assembly. Single 20w Solar Module. SL125 2-Tier. Complete Lantern Assembly. Dual 20w Solar Modules. SL125 3-Tier. Complete Lantern Assembly. Single 40w Solar Module. SL125 3-Tier. Complete Lantern Assembly. Dual 40w Solar Modules. SL125 4-Tier. Complete Lantern Assembly. Single 40w Solar Module. SL125 4-Tier. Complete Lantern Assembly. Dual 40w Solar Modules. ORDERCODES Eg. SL125-1/C-1-GPS.R Denotes SL125 1-Tier Complete Lantern Assembly. Single Solar Module. GPS Synchronised. RED. Range of SL125 light-heads to suit intensity requirements

34 SL125/C 5-7nm Complete Marine Lantern Assembly SL125-1/C-1 SPECIFICATIONS Light Characteristics Light Source SL125 Series LED Lantern Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Refer to table on previous page Visible Range (nm) 5-7 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) Refer to table on previous page Circuit Protection Reverse polarity Nominal Voltage (v) 12 Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Output (watts) Multicrystalline 20 (SL125-1 and SL125-2 configurations) 40 (SL125-3 and SL125-4 configurations) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 26 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material 7-stage powder-coated aluminium Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 200mm OD base pattern Height (mm/inches) From 665 / 26 1 /4 Width (mm/inches) 656 / 25 3 /4 Mass (kg/lbs) From 18 /39 5 /8 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof EN :2001. EN :2001. EN EN :1995. EN :2002. USCG specification HSCG23-05-R-E43013, including Change 1. ISO9001:2000 IP68 light-head. IP66 battery compartment Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years Single or dual solar module(s) Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SL125/C-GSM) or control (via radio- SL125/C-RC) capabilities Note - remote monitoring/control will reduce visible range of lantern due to increased power consumption * Subject to standard terms and conditions Specifications subject to change or variation without notice

35 SL nm LED Marine Lantern Series This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 New Now available with optional Comm-Synch or Radio Control LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Lens and base moulded from UV-stabilised LEXAN polycarbonate (IP68 rating) Bird deterrent spike Automatic night activation Large industry standard 200mm OD base pattern The Sealite Advantage Available with up to 4 tiers of ultra-high intensity LEDs(36 LEDs per tier) for increased light intensity 256 user-adjustable flash characteristics 4 adjustable intensity settings Operates in conjunction with existing or purposebuilt power supplies Installs in minutes & operates maintenancefree IP68 waterproof Vertical light emissions to maintain visibility when passing adjacent to light The SL125 LED marine lantern is maintenance-free and used by many of the world s busiest ports, and largest militaries. SL125 Technology The SL125 is the most advanced LED marine lantern on the market. Utilising the latest software and microcircuitry developments, the lantern boasts a huge number of features including flash-memory and the most efficient power conversion available. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life. The unit is sealed using polycarbonate bonding compounds similar to those used by major automobile manufacturing companies. This also enables a waterproof rating of IP68 - unmatched by other manufacturers. Lantern Operation The SL125 is ideal to fit on existing structures, or can be supplied as a complete unit with external solar modules and battery compartment. The large industry-standard base, and 1 metre of included cable allows the SL125 to be readily fitted to any 12 volt power supply. Once installed, the SL125 requires no operator intervention. The flash characters are easily adjusted on-site by the user, and the lantern will automatically begin operation at dusk - once the ambient light threshold drops sufficiently. SL125, Brazil installation

36 SL nm LED Marine Lantern Series SL125-1 SL125-2 SL125-3 SL125-4 Up to 4 tiers of 36 LEDs are available to increase the light intensity of the SL125 unit. The SL125-2, SL125-3 and SL125-4 have 72, 108 and 144 LEDs respectively. Each LED tier utilises the Sealite omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) to increase the intensity and uniformity of the horizontal output. Multiple focal points on the lens then create superior divergence specifications to suit regulations worldwide. Optional GPS Synchronisation (SL125-GPS) The SL125 lantern series are also available with optional GPS synchronisation enabling users to clearly mark channels, ports, rivers and entrances, marinas, aquaculture installations and exclusion zones with independent lanterns which flash in synchronisation. When lanterns flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting. Optional RF Communication Synchronisation (SL125-CS) The SL125 is now available with optional short-range RF communication synchronisation. Two (2) or more lights can be synchronised to flash in unison via an internal RF module - ideal for rivers, marina entrances, channel marking and aquaculture. Optional GSM Remote Monitoring (SL125-GSM) and AIS Integration (SL125-AIS) The SL125 lantern series may also be fitted with GSM or AIS remote monitoring systems - enabling users to access real-time diagnostic data remotely. AIS integration also enables crucial Message 21 information to be broadcast to mariners within the region. Optional Remote Radio Control (SL125-RC) Radio control may be fitted to SL125 series products enabling users to remotely modify the setup of their lantern via handheld radio controller. For example, the operator can remotely change between different coloured LED banks (to change the colour of the light), turn their lights ON and OFF, or change the flash setting. Perfect for remote traffic control and to designate an area of activity. The SL125 4-Tier lantern utilises a unique heat-dissipating domed lens to achieve maximum LED intensity output over a wider range of environmental conditions. In addition, each LED array incorporates temperature control mechanisms to ensure maximum operational performance. SL125-4 pylon installation, Israel SL125/C lanterns mark wharf entrance, Bandar Abbas, Iran SL125 installed on buoy, Newcastle, Australia

37 SL nm LED Marine Lantern Series SPECIFICATIONS Description PeakIntensity Current Draw Model Flashing(cd) Colour LEDs Voltage (Amps) SL125-1.R 1 Tier LED Marine Lantern 114 RED v SL125-1.G 1 Tier LED Marine Lantern 93 GREEN v SL125-1.W 1 Tier LED Marine Lantern 168 WHITE v SL125-1.Y 1 Tier LED Marine Lantern 88 YELLOW v SL125-2.R 2 Tier LED Marine Lantern 242 RED v SL125-2.G 2 Tier LED Marine Lantern 182 GREEN v SL125-2.W 2 Tier LED Marine Lantern 342 WHITE v SL125-2.Y 2 Tier LED Marine Lantern 180 YELLOW v SL125-3.R 3 Tier LED Marine Lantern 356 RED v SL125-3.G 3 Tier LED Marine Lantern 275 GREEN v SL125-3.W 3 Tier LED Marine Lantern 492 WHITE v SL125-3.Y 3 Tier LED Marine Lantern 272 YELLOW v SL125-4.R 4 Tier LED Marine Lantern 486 RED v SL125-4.G 4 Tier LED Marine Lantern 360 GREEN v SL125-4.W 4 Tier LED Marine Lantern 700 WHITE v SL125-4.Y 4 Tier LED Marine Lantern 394 YELLOW v Specifications subject to change or variation without notice Intensity (cd) Range (nm) AT = 0.74 Range (nm) AT = 0.85 Range (km) AT = AT = Atmospheric Transmissivity When a light beam passes through the atmosphere the atmospheric transmissivity factor indicates how much light is absorbed by the atmosphere. For example, when AT = 0.85 this means that 85% of the original light intensity is visible after 1nm. Consequently 15% of light is lost to atmospheric absorption.

38 SL nm LED Marine Lantern Series SL125-1 SL125-2 SL125-4 SL125-3 SPECIFICATIONS Light Characteristics Light Source SL125-1 (36 ultra-high intensity LEDs) SL125-2 (72 ultra-high intensity LEDs) SL125-3 (108 ultra-high intensity LEDs) SL125-4 (144 ultra-high intensity LEDs) Red, Green, White, Yellow, Blue Refer to table on previous page Available Colours Peak Intensity (cd) Visible Range (nm) 5-7 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 (optional 3 degree divergence for extended visible range of 10nm) Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) Refer to table on previous page Circuit Protection Integrated Nominal Voltage (v) 12 Temperature Range -40 to 80 o C Physical Characteristics Body Material LEXAN Polycarbonate UV-stabilised Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 200mm OD base pattern Height (mm/inches) SL125-1: 205 / 8 1 /8 SL125-2: 240 / 9 1 /2 SL125-3: 240 / 9 1 /2 SL125-4: 240 / 9 1 /2 Width (mm/inches) 231 / 9 1 /8 Mass (kg/lbs) From 1.1 / 2 3 /8 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof EN :2001. EN :2001. EN EN :1995. EN :2002. USCG specification HSCG23-05-R-E43013, including Change 1. ISO9001:2000 IP68 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years Hard-wire or GPS synchronisation Remote monitoring (via AIS, or GSM cell-phone- SL125-GSM) or control (via radio- SL125-RC) capabilities Additional cable Note - remote monitoring/control will reduce visible range of lantern due to increased power consumption Specifications subject to change or variation without notice * Subject to standard terms and conditions

39 SL125/C-Type 2 5-7nm Complete Marine Lantern Assembly This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 New Now available with optional Comm-Synch or Radio Control Bird deterrent spike Adjustable solar module(s) angled t o m a x i m i s e solar collection LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Lens moulded from UV-stabilised LEXAN polycarbonate (IP68 rating) Large industry standard 200mm OD base pattern Large user-replaceable 55Ah battery in 7- stage powder-coated aluminium housing (IP66) The Sealite Advantage Complete lantern assembly with large battery housing for low sunlight regions or high duty cycles SL125 light-head available with up to 4 tiers of ultrahigh intensity LEDs (36 LEDs per tier) for increased light intensity 256 user-adjustable flash characteristics 4 adjustable intensity settings Impact resistant battery housing Automatic night activation IP68 light head & IP66 battery housing Vertical light emissions to maintain visibility when passing adjacent to light The SL125/C-Type 2 Complete Lantern Assembly incorporates a larger battery housing to the standard SL125/C Assembly, enabling even great autonomy particularly in lower sunlight regions. The SL125/C-Type 2 offers unique flexibility, and is available in varying configurations to suit a range of installation and intensity requirements. The powder-coated 3mm aluminium housing is laser-cut, and robotically folded for guaranteed precision every time. One or two 40watt solar module(s) are fitted to power longer-range requirements or ancillary equipment, with large 55Ah battery. A modular design, all components of the system are replaceable in the unlikely event of damage to the unit.the battery is accessed through the top of the lantern assembly, via a robust swing-hinge. Access to the user-adjustable flash and intensity settings is also achieved through this design. The solar modules are extendable to 51 degrees as standard, with the option to increase in equatorial regions. SL125-1/C-1.T2 SL125-1/C-2.T2 SL125-2/C-1.T2 SL125-2/C-2.T2 SL125-3/C-1.T2 SL125-3/C-2.T2 SL125-4/C-1.T2 SL125-4/C-2.T2 SL125 1-Tier. Complete Lantern Assembly. Single 40w Solar Module. SL125 1-Tier. Complete Lantern Assembly. Dual 40w Solar Modules. SL125 2-Tier. Complete Lantern Assembly. Single 40w Solar Module. SL125 2-Tier. Complete Lantern Assembly. Dual 40w Solar Modules. SL125 3-Tier. Complete Lantern Assembly. Single 40w Solar Module. SL125 3-Tier. Complete Lantern Assembly. Dual 40w Solar Modules. SL125 4-Tier. Complete Lantern Assembly. Single 40w Solar Module. SL125 4-Tier. Complete Lantern Assembly. Dual 40w Solar Modules. ORDERCODES Eg. SL125-3/C.T2-2-GPS.G Denotes SL125 3-Tier Complete Type 2 Lantern Assembly. Dual Solar Modules. GPS Synchronisation. GREEN. SL125/C lanterns installed at marina, Venice, Italy Range of SL125 light-heads to suit intensity requirements

40 SL125/C-Type 2 5-7nm Complete Marine Lantern Assembly SL125-1/C-1.T2 SPECIFICATIONS Light Characteristics Light Source SL125 Series LED Lantern Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Refer to table on previous page Visible Range (nm) 5-7 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) Refer to table on previous page Circuit Protection Reverse polarity Nominal Voltage (v) 12 Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle) Temperature Range -40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 40 or 80 Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 55 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material 7-stage powder-coated aluminium Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 200mm OD base pattern Height (mm/inches) From 570 / 22 1 /2 Width (mm/inches) 665 / 26 1 /4 Mass (kg/lbs) From 18 /39 5 /8 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof EN :2001. EN :2001. EN EN :1995. EN :2002. USCG specification HSCG23-05-R-E43013, including Change 1. ISO9001:2000 IP68 light-head. IP66 battery compartment Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years Single or dual solar module(s) 80Ah battery (SL125/C.T2/80Ah) 60watt solar module (single or dual configurations) Hard-wire or GPS synchronisation Remote monitoring (via AIS, or GSM cell-phone- SL125/C.T2-GSM) or control (via radio- SL125/C.T2-RC) capabilities Extended base post Note - remote monitoring/control will reduce visible range of lantern due to increased power consumption Specifications subject to change or variation without notice * Subject to standard terms and conditions

41 SL-CGA 1252W Class A LED Lantern The SL-CGA 1252W is a United States Coast Guard approved Class A structure lantern specifically designed to meet the needs of Class A structures in the Gulf of Mexico. The lantern utilises 72 LEDs as a light source, enhanced by Sealite s LED lens and omnidirectional LED reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) to gain optimum LED performance. The SL-CGA 1252W is one of the most advanced LED marine lanterns on the market. Utilizing the latest software and micro circuitry developments, the lantern boasts a huge number of features including flash-memory and the most efficient power conversion available. Bird deterrent spike LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Lens and base moulded from UVstabilised LEXAN polycarbonate New Now available with internal RF Comm-Synch No cabling Wireless synchronisation of flashing lights Automatic night activation 72 ultra-high intensity LEDs 200mm OD base pattern The Sealite Advantage U.S. Coast Guard Approved Lowmaintenance(LED technology) Easyretrofit onexisting structures Available with proprietary synchronisation software IP68 waterproof The SL-CGB 1251W is a United States Coast Guard approved Class B structure lantern specifically designed to meet the needs of Class B structures. The SL-CGB 1251W boasts a huge number of features including flash-memory and the most efficient power conversion available. The light utilises 36 LEDs as a light source, enhanced by Sealite s LED lens and omnidirectional LED reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) to gain optimum LED performance. The unit is supplied with a 1mtr pigtail for 12v power input, and is ideal to fit on existing structures or can be supplied as a complete unit with external solar modules and battery compartment. This lantern is available in a hard-wired (SL-CGA 1252W-S), RF (SL-CGA 1252W-CS) or GPS synchronised (SL-CGA 1252W-GPS) version for multiple lantern installations SL-CGB 1251W Class B LED Lantern Bird deterrent spike LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Lens and base moulded from UVstabilised LEXAN polycarbonate New Now available with internal RF Comm-Synch No cabling Wireless synchronisation of flashing lights Automatic night activation This lantern is available in a hard-wired (SL-CGB 1251W-S), RF (SL-CGB 1251W-CS) or GPS synchronised (SL-CGB 1251W-GPS) version for multiple lantern installations 36 ultra-high intensity LEDs 200mm OD base pattern

42 SL-CGA 1252W / SL-CGB 1251W Class A and B LED Lanterns SL-CGA 1252W Internal RF Module SL-CGB 1251W RF Comm-Synch Class A&BLanterns SPECIFICATIONS SL-CGA 1252W SL-CGB 1251W USCG Approval Class A Class B Light Characteristics Light Source 72 ultra-high intensity LEDs 36 ultra-high intensity LEDs Available Colours White White Effective Intensity (cd) 148 Candela (@ QF 0.3sec ON) 79 Candela (@ QF 0.3sec ON) Visible Range (nm) >5 >3 Horizontal Output (degrees) Vertical Divergence (degrees) 9 9 Reflector Type Omnidirectional 360 LED Reflector Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 >100,000 Synchronisation Optional via Hard-Wire, RF or GPS Optional via Hard-Wire, RF or GPS Electrical Characteristics Current Draw (ma) Circuit Protection Integrated Integrated Nominal Voltage (v) Temperature Range -40 to 80 o C -40 to 80 o C Physical Characteristics Body Material LEXAN Polycarbonate UV-stabilised LEXAN Polycarbonate UV-stabilised Lens Material LEXAN Polycarbonate UV-stabilised LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 150 / 5 7 /8 Lens Design External optics with interior flute design External optics with interior flute design Mounting 200mm OD base pattern 200mm OD base pattern Height (mm/inches) 240 / 9 1 /2 205 / 8 1 /8 Width (mm/inches) 231 / 9 1 /8 231 / 9 1 /8 Mass (kg/lbs) 1.2 / 2 2 /3 1.1 / 2 1 /2 Product Life Expectancy Up to 12 years Up to 12 years Certifications CE EN :2001. EN :2001. EN EN :2001. EN :2001. EN EN :1995. EN :2002. EN :1995. EN :2002. USCG specification HSCG23-05-R-E43013, including Change 1. USCG specification HSCG23-05-R-E43013, including Change 1. Quality Assurance ISO9001:2000 ISO9001:2000 Waterproof IP68 IP68 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite SEALITE is a registered trademark of Sealite Pty Pty Ltd Ltd Warranty * Full 3 years Full 3 years Options Available Additional cable Additional cable Remote monitoring capabilities (AIS, GSM cellphone) RF comm-synch (SL-CGA 1252W-CS) Remote monitoring capabilities (AIS, GSM cellphone) RF comm-synch (SL-CGB 1251W-CS) Specifications subject to change or variation without notice * Subject to standard terms and conditions

43 U.S. Department of Homeland Security United States Coast Guard Mr. Paul Goodwin Watermark Navigation Systems, LLC 29 Gifford East Drive Gifford, NH Dear Mr. Goodwin: Command United States Coast Guard 2100 Second Street, S.W. Washington, DC Staff Symbol: G-PWN-1 Phone: (202) Fax: (202) MAY 4 7nO6 The letter is in response to your of January 26, 2006 requesting approval of your Sealite lanterns for use on Class A, B and C structures. You are authorized to identify the white SL-CGAI252W as being "U. S. Coast Guard Approved" for Class "A" structures, the SL-CGB1251W as being approved for class "B" structures and the SLCGC6OW as being approved for class "C" structures when operated under the jurisdiction of the 8 11i Coast Guard District. This approval is based on test data provided in your reports from Light Lab International as well as the discussion below: The white SL-CGAl252W lantern operating with a Quick flash rhythm (0.3 seconds ON) will provide a minimum effective intensity of 148 candela satisfying the requirements of 125 candela for class "A" structures. The white SL-CGB125 I W operating with a Quick flash rhythm (0.3 seconds ON) will provide a minimum effective intensity of 79 candela satisfying the requirements of 25 candela for class "B" structures. The white SL-CGC6OW lantern operating with a Quick flash rhythm (0.3 seconds ON) will provide a minimum effective intensity of 10 candela satisfying the requirements of 1 candela for use on class "C" structures. Sincerely, J/ / ARENSTAM ommander, U. S. Coast Guard By direction

44 SL-CGC 60W Class C Solar LED Lantern The most advanced USCG approved Class C lantern available Bird deterrent spike New Now available with internal RF Comm-Synch No cabling Wireless synchronisation of flashing lights LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Moulded from UV-stabilised virgin polycarbonate Momentary switch (operator presses this to obtain diagnoistics) Large internal solar module Automatic night activation 6 ultra-high intensity LEDs IP68 connector for diagnostic test lead Internal user-replaceable battery in sealed compartment (IP68 rating) The Sealite Advantage U.S.CoastGuard Approved Low maintenance (LED technology) User-replaceable battery in sealed battery compartment >45 day autonomy External connector & momentary switch for ease of diagnostic testing to meet maintenance contract requirements IP68 waterproof The SL-CGC 60W is a United States Coast Guard Approved Class C structure lantern, specifically designed to meet the needs of Class C structures in the Gulf of Mexico. The unit is completely self-contained with an integrated solar/battery system, and can be easily installed in minutes. The flash characters are adjustable on-site by the user, and the lantern has a permanent ON/OFF storage switch. During daylight hours the solar module charges the battery, and the lantern will automatically begin operation at dusk. The SL-CGC 60W s large 16Ah battery enables greater than 45 days autonomy. The battery is housed in a sealed compartment (IP68 waterproof) allowing for replacement after years of maintenance-free service. The IP68 waterproof sealed connector and momentary switch on the lantern enable maintenance personnel to simply connect a test lead to diagnose the battery voltage and solar charging rate, in accordance to maintenance contracts. Optional RF Communication Synchronisation (SL-CGC 60W-CS) The SL-CGC 60W-CS is an RF synchronised version of the popular SL-CGC 60W U.S. Coast Guard Approved Class C lantern. The large internal dual solar modules and battery ensure reliable operation, with the internal RF module ensuring all RF lanterns set to the same flashing characteristic flash in synchronisation for clear recognition. The SL-CGC60W Solar LED Lantern is by far the most affordable and user-friendly USCG Approved Class C light available in the Gulf of Mexico. Optional Hard-Wire Synchronisation (SL-CGC 60W-S) The SL-CGC 60W-S is a synchronised version of the standard lantern. The installer simply connects the lanterns using a hard-wired connection to maintain synchronised flash patterns as required on multiple lantern installations. RF Comm-Synch Class C Lanterns Internal RF Module

45 SL-CGC 60W Class C Solar LED Lantern SL-CGC 60W External connector and momentary switch for ease of diagnostic testing to meet maintenance contract requirements SPECIFIC ATIONS SL-CGC60W USCG Approval Light Characteristics Class C Light Source 6 ultra-high intensity LEDs Available Colours White Effective Intensity (cd) 8 Candela (@ QF 0.3sec ON) Visible Range (nm) >1 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Synchronisation Optional via hard-wire or internal RF module Test Facility Battery voltage, charging current Electrical Characteristics Current Draw (ma) Minimal Circuit Protection Integrated Nominal Voltage (v) 3.6 Autonomy (days) >45 (>30 days for SL-CGC 60W-CS) Temperature Range -40 to 80 o C RF Synchronisation + Frequency Range Expandability Approvals Solar Characteristics 2.5GHz 1.5km between 2 lights, relayed Peer to peer networking FCC / CE Solar Module Type Multicrystalline Output (watts) 1.4 (2.5watt for SL-CGC 60W-CS) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type High grade NiMH Environment friendly Battery Capacity (Ah) 16 Nominal Voltage 3.6 Battery Service Life Average 5 years Battery Replacement Via waterproof compartment (user replaceable) Physical Characteristics Body Material LEXAN Polycarbonate UV-stabilised Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 150 / 5 7 /8 Lens Design External optics with interior flute design Mounting 200mm OD base pattern Height (mm/inches) 205 / 8 1 /8 (240mm / 9 1 /2 inches for SL-CGC 60W-CS) Width (mm/inches) 231 / 9 1 /8 Mass (kg/lbs) 1.2 / 2 2 /3 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof EN :2001. EN :2001. EN EN :1995. EN ISO9001:2000 IP68 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years RF comm-synch (SL-CGC 60W-CS) Specifications subject to change or variation without notice + SL-CGC 60W-CS model only * Subject to standard terms and conditions

46 SL07 1-4nm LED Light Fixture Bird deterrent spike Available with internal GPS synchronisation Automatic night activation 1mt of cable provided for ease of installation LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) 20 ultra-high intensity LEDs Lens and base moulded from UVstabilised LEXAN polycarbonate (IP68 rating) Shown with cut-out lens The Sealite Advantage 1-4 nautical mile range 256user-adjustableflash characteristics 4 adjustable intensity settings Operates in conjunction with existing or purposebuilt power supplies The SL07 is an LED Light Fixture designed to offer superior visibility and operate in conjunction with existing or purpose-built power supplies. With a variable range of 1 to 4nm, a maintenance-free light source, and 256 useradjustable flash codes, the SL07 series of LED lights is the preferred choice for buoy manufacturers seeking to fit a marine lantern to existing or independently designed power sources. The SL07 is available in a number of configurations, colours and cable lengths and is the perfect replacement for obsolete incandescent lights. Customers using the SL07 range benefit from Sealite s optical engineering experience. Precision alignment and focus of the LEDs is made possible through the use of the 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918), increasing the intensity and uniformity of the horizontal output. The tough UV-stabilised LEXAN polycarbonate lens is specifically designed and produced by Sealite for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life. Flash adjustment is achieved via two (2) rotary switches - accessed through the base of the unit. For easy installation 1m of cable is supplied as standard. Sectored blue/white SL07 light up Israel s largest marina, Herzliya Marina

47 SL07 1-4nm LED Light Fixture SPECIFICATIONS Light Characteristics Light Source 20 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red - 47 Green - 47 White - 90 Yellow - 32 Visible Range (nm) >3 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) 180 (nominal) Circuit Protection Integrated Nominal Voltage (v) 12 Temperature Range -40 to 80 o C Physical Characteristics Body Material LEXAN Polycarbonate UV-stabilised Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 107 / 4 1 /4 Lens Design External optics with interior flute design Mounting 4 x 6mm mounting holes Height (mm/inches) 141 / 5 1 /2 Width (mm/inches) 136 / 5 3 /8 Mass (kg/lbs) 0.6 / 1 1 /3 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Waterproof Intellectual Property EN :1997. EN :1997 ISO9001:2000 IP68 Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years Hard-wire or GPS synchronisation 50mm pole mount adaptor plate Additional cable Specifications subject to change or variation without notice * Subject to standard terms and conditions

48 SL10 1-4nm Heavy-Duty LED Light Fixture Bird deterrent spike LED lens and Sealite s 360 Omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Automatic night activation 20 ultra-high intensity LEDs Heavy-duty 7-stage powder-coated aluminium housing 1mt of cable provided for ease of installation The Sealite Advantage 1-4 nautical mile range 256 user-adjustable flash characteristics 4 adjustable intensity settings Operates in conjunction with existing or purposebuilt power supplies Interchangeable 20 LED flasher unit & replaceable lens assembly The SL10 is a heavy-duty LED Light Fixture designed to operate in conjunction with existing or purpose-built power supplies and offer maintenance-free service over a wide range of environmental conditions. With a variable range of 1 to 4nm, a maintenance-free light source and 256 useradjustable flash codes, the SL10 series of LED lights is the preferred choice of buoy manufacturers seeking to fit a heavy-duty marine lantern to existing or independently designed power sources. The SL10 is also available in a number of configurations, colours and cable lengths and is the perfect replacement for obsolete incandescent lights in extreme environments. Lens assembly SL10 Dual Pier Lights, Harwich Harbour, United Kingdom Interchangeable Digital Flasher unit

49 SL10 1-4nm Heavy-Duty LED Light Fixture SPECIFICATIONS Light Characteristics Light Source 20 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red - 47 Green - 47 White - 90 Yellow - 32 Visible Range (nm) >4 Horizontal Output (degrees) 360 Vertical Divergence (degrees) 9 Reflector Type Omnidirectional 360 LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Intensity Adjustments Adjustable in 25% increments LED Life Expectancy (hours) >100,000 Electrical Characteristics Current Draw (ma) 180 (nominal) Circuit Protection Integrated Nominal Voltage (v) 12 Temperature Range -40 to 80 o C Physical Characteristics Body Material 7-stage powder-coated aluminium Lens Material LEXAN Polycarbonate UV-stabilised Lens Diameter (mm/inches) 107 / 4 1 /4 Lens Design External optics with interior flute design Mounting 50mm OD pole Height (mm/inches) 205 / 8 1 /8 Width (mm/inches) 172 / 6 3 /4 Mass (kg/lbs) 3 / 6 2 /3 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance EN :1997. EN :1997 ISO9001:2000 Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918 Trademarks SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Options Available Full 3 years Hard-wire synchronisation 200mm OD mounting plate Additional cable * Subject to standard terms and conditions Specifications subject to change or variation without notice

50 SL48 2ft LED Leading Light Automatic night activation 46, 92 or 138 ultra-high intensity LEDs Pressure die-cast marine grade LM6 aluminium body (7-stage powder coating) and UV resistant polycarbonate lens Available with internal GPS synchronisation or GSM Cell-phone Monitoring Dustproof, rustproof, weatherproof and vandal-resistant (IP66 rating) Convenient mounting attachment points for ease of installation SL48-2 dual row light The Sealite Advantage Directional 2ft LED leading light >5.5 nautical mile range 256 user-adjustable flash characteristics Adjustable intensity settings Operates in conjunction with existing or purposebuilt power supplies IP66 waterproof Optional internal GPS synchronisation & GSM remote monitoring The SL48 is a 2ft LED leading light designed to offer vessels clear night navigation, and is a convenient replacement for conventional lead lighting. The unit is available in 3 configurations utilising either single (SL48-1), dual (SL48-2), or triple (SL48-3) LED circuits as a light source. The advanced circuitry of the SL48 series comprise of a DC/DC converter, temperature monitoring, current control, and automatic night-activation. The materials and design of the SL48 provide a high degree of corrosion resistance and are especially suited to corrosive and high humidity atmosphere conditions. The unit is dustproof, rustproof, weatherproof and vandal-resistant. The body of the unit is made from pressure die-cast marine grade LM6 aluminium, subject to 7-stage powder coating. Single, dual and triple row versions have the same body width. A heavy-duty linear prismatic clear lens is securely fixed to the body by stainless-steel socket head cap screws recessed into the lens moulding. A replaceable single piece EPDM gasket ensures the high IP66 rating. The unit operates off a standard 8-20 volt power supply, and may be run from a mains powered system or with solar and battery back-up in the event of power failure. The SL48 leading light is also available with hard-wire or GPS synchronisation and GSM remote monitoring capabilities. When leading lights flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting.

51 SL48 2ft LED Leading Light SL48-2 S P ECI FI CATIO N S SL48-1 SingleRow SL48-2DualRow SL48-3 Triple Row Light Characteristics Light Source 46 ultra-high intensity LEDs 92 ultra-high intensity LEDs 138 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue Peak Intensity (cd) >120 >210 >370 Visible Range (nm) >5.5 >6.5 >7.5 Horizontal Output (degrees) Vertical Divergence (degrees) Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Up to 256 IALA recommended (user adjustable) Up to 256 IALA recommended (user adjustable) Intensity Adjustments User-adjustable User-adjustable User-adjustable LED Life Expectancy (hours) >100,000 >100,000 >100,000 Electrical Characteristics Current Draw (ma) Red, Yellow Blue, Green, White Red, Yellow Blue, Green, White Red, Yellow Blue, Green, White Circuit Protection Polarity protected Polarity protected Polarity protected Nominal Voltage (v) Temperature Range -40 to 80 o C -40 to 80 o C -40 to 80 o C Physical Characteristics Body Material Lens Material Pressure die-cast marine grade LM6 aluminium (7-stage powder coating) UV-stabilised injection moulded polycarbonate Pressure die-cast marine grade LM6 aluminium (7-stage powder coating) UV-stabilised injection moulded polycarbonate Pressure die-cast marine grade LM6 aluminium (7-stage powder coating) UV-stabilised injection moulded polycarbonate Mounting 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes Height (mm/inches) 122 / 4 3 /4 122 / 4 3 /4 122 / 4 3 /4 Width (mm/inches) 137 / 5 3 /8 137 / 5 3 /8 137 / 5 3 /8 Length 698 / 27 1 /2 698 / 27 1 /2 698 / 27 1 /2 Mass (kg/lbs) 3.5 / 7 3 /4 3.6 / 7 7 /8 3.8 / 8 1 /3 Product Life Expectancy Up to 12 years Up to 12 years Up to 12 years Certifications CE EN :1997. EN :1997 EN :1997. EN :1997 EN :1997. EN :1997 Quality Assurance ISO9001:2000 ISO9001:2000 ISO9001:2000 Waterproof IP66 IP66 IP66 Intellectual Property Trademarks SEALITE is a registered trademark of Sealite Pty Ltd SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Full 3 years Full 3 years Full 3 years Options Available Power supplies/systems Power supplies/systems SEALITE is a registered trademark of Sealite Pty Ltd Power supplies/systems Hard-wire or GPS synchronisation Hard-wire or GPS synchronisation Hard-wire or GPS synchronisation Remote monitoring capabilities Remote monitoring capabilities Remote monitoring capabilities (GSM) (GSM) (GSM) Additional cable Additional cable Additional cable Specifications subject to change or variation without notice * Subject to standard terms and conditions

52 SL96 4ft LED Leading Light Automatic night activation 92, 184 or 276 ultra-high intensity LEDs Pressure die-cast marine grade LM6 aluminium body (7-stage powder coating) and UV resistant polycarbonate lens Available with internal GPS synchronisation or GSM Cell-phone Monitoring Dustproof, rustproof, weatherproof and vandal-resistant (IP66 rating) The Sealite Advantage Directional 4ft LED leading light >6.5 nautical mile range 256 user-adjustable flash characteristics Adjustable intensity settings Operates in conjunction with existing or purposebuilt power supplies IP66 waterproof Optional internal GPS synchronisation & GSM remote monitoring SL96-2 dual row light Convenient mounting attachment points for ease of installation The SL96 is a 4ft LED leading light offering greater visibility to the smaller SL48 series. The unit is available in 3 configurations utilising either single (SL96-1), dual (SL96-2), or triple row (SL96-3) LED circuits as a light source. The advanced circuitry of the SL96 series comprise of a DC/DC converter, temperature monitoring, current control, and automatic night-activation. The materials and design of the SL96 provide a high degree of corrosion resistance and are especially suited to corrosive and high humidity atmosphere conditions. The unit is dustproof, rustproof, weatherproof and vandal-resistant. The body of the unit is made from pressure die-cast marine grade LM6 aluminium, subject to 7-stage powder coating. Singe, dual and triple row versions have the same body width. A heavy-duty linear prismatic clear lens is securely fixed to the body by stainless-steel socket head cap screws recessed into the lens moulding. A replaceable single piece EPDM gasket ensures the high IP66 rating. The unit operates off a standard 8-20 volt power supply, and may be run from a mains powered system or with solar and battery back-up in the event of power failure. The SL96 leading light is also available with hard-wire or GPS synchronisation and GSM remote monitoring capabilities. When leading lights flash in synchronisation, they can be clearly distinguished from other navaids and confusing background lighting. Rigby Island Leading Lights, Australia Port of Melbourne Leading Lights, Australia Tamar River Leading Lights, Tasmania Australia

53 SL96 4ft LED Leading Light SL96-2 SPEC I FI CATIONS SL96-1 Single Row SL96-2 Dual Row SL96-3 Triple Row Light Characteristics Light Source 92 ultra-high intensity LEDs 184 ultra-high intensity LEDs 276 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue Peak Intensity (cd) >210 >410 >800 Visible Range (nm) >6.5 > Horizontal Output (degrees) Vertical Divergence (degrees) Available Flash Characteristics Up to 256 IALA recommended Up to 256 IALA recommended Up to 256 IALA recommended (user adjustable) (user adjustable) (user adjustable) Intensity Adjustments User-adjustable User-adjustable User-adjustable LED Life Expectancy (hours) >100,000 >100,000 >100,000 Electrical Characteristics Current Draw (ma) Red, Yellow Red, Yellow Blue, Green, White Blue, Green, White Circuit Protection Polarity protected Polarity protected Polarity protected Nominal Voltage (v) Temperature Range -40 to 80 o C -40 to 80 o C -40 to 80 o C Physical Characteristics Body Material Lens Material Pressure die-cast marine grade LM6 aluminium (7-stage powder coating) UV-stabilised injection moulded polycarbonate Pressure die-cast marine grade LM6 aluminium (7-stage powder coating) UV-stabilised injection moulded polycarbonate Red, Yellow Blue, Green, White Pressure die-cast marine grade LM6 aluminium (7-stage powder coating) UV-stabilised injection moulded polycarbonate Mounting 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes Height (mm/inches) 122 / 4 3 /4 122 / 4 3 /4 122 / 4 3 /4 Width (mm/inches) 137 / 5 3 /8 137 / 5 3 /8 137 / 5 3 /8 Length 1305 / 51 3 / / 51 3 / / 51 3 /8 Mass (kg/lbs) 6.8 / / 15 1 /8 7.2 / 15 7 /8 Product Life Expectancy Up to 12 years Up to 12 years Up to 12 years Certifications CE EN :1997. EN :1997 EN :1997. EN :1997 EN :1997. EN :1997 Quality Assurance ISO9001:2000 ISO9001:2000 ISO9001:2000 Waterproof IP66 IP66 IP66 Intellectual Property Trademarks SEALITE is a registered trademark of Sealite Pty Ltd SEALITE is a registered trademark of Sealite Pty Ltd Warranty * Full 3 years Full 3 years Full 3 years Options Available Power supplies/systems Power supplies/systems SEALITE is a registered trademark of Sealite Pty Ltd Power supplies/systems Hard-wire or GPS synchronisation Hard-wire or GPS synchronisation Hard-wire or GPS synchronisation Remote monitoring capabilities Remote monitoring capabilities Remote monitoring capabilities (GSM) (GSM) (GSM) Additional cable Additional cable Additional cable Specifications subject to change or variation without notice * Subject to standard terms and conditions

54 BargeSafe TM LED Barge Light Moulded onepiece handle New d Meets UL 1104 Applicable Sections for a 3nm Barge Light Automatic night activation Convenient ON/OFF switch 1watt ultra-high intensity LED Sealite worldclass sectored LED lens to suit UL 1104 certified configurations Internal userreplaceable or rechargeable battery The Sealite Advantage UL 1104 certified LED technology Precise light sectoring achieved via Sealite s world-class in-house designed lens 3nm visible range Robust Installs in seconds Low power consumption Lightweight The Sealite BargeSafeTM range of LED barge lights are certified to UL 1104 with >3nm visible range. The LED barge light is one of the most advanced in its class, and incorporates a host of innovative features designed to make the unit extremely user-friendly. The world-class LED lens is designed by Sealite and achieves precise intensity and sectoring requirements from a single LED light source. This design helps achieve a lower operational current compared with alternate LED barge lights - making the unit ultra efficient and offering a battery run time of up to 45 nights. The light will run from a 6v or 12v dry-cell, or can be supplied with an advanced rechargeable battery pack and charge controller. Advanced onboard circuitry incorporates a DC/DC converter which will maintain the required light source intensity over varying battery voltage. The barge light casing and handle are injected moulded from UV-stabilised polycarbonate offering enormous impact resistance and long operational life. The casings are coloured for easy identification of light output colour. A magnetic base provides strong fixing in position to the barge deck. (Yellow required for inland waters) G Y W R G R

55 BargeSafe TM LED Barge Light Ease of battery re-charge or replacement SPECIFICATIONS Light Characteristics Light Source 1x 1watt ultra-high intensity LED Available Colours Red, Green, White, Yellow as per UL 1104 Peak Intensity (cd) As per UL 1104 Visible Range (nm) > 3nm as per UL 1104 Horizontal Output (degrees) Red , Green , White- 135, Yellow- 225 as per UL 1104 Flash Characteristics As per UL 1104 (steady-on & flashing) LED Life Expectancy (hours) >100,000 Electrical Characteristics Circuit Protection Integrated Working Voltage Range (v) 4-16 Temperature Range -40 to 80 o C Power Supply Battery Type Air Alkaline (recommended), rechargeable battery (optional) Battery Capacity (Ah) 45Ah (Air Alkaline) Nominal Voltage (v) 6v (Air Alkaline) Autonomy (days) >45 Physical Characteristics Battery Housing LEXAN Polycarbonate UV-stabilised Lens Material Acrylic Lens Mount & Top Anodized aluminium Lens Design Internal single LED cavity with individual sectoring compartments to meet all UL 1104 angles for light output Mounting 4x magnets Height (mm/inches) 195 / 7 2 /3 Width (mm/inches) 172/6 7 /8 Depth (mm/inches) 108 / 4 1 /4 Mass (kg/lbs) 1.5 / 3 1 /3 Product Life Expectancy Up to 12 years Certifications Approvals UL 1104 Quality Assurance ISO9001:2000 Waterproof IP67 Intellectual Property Trademarks Warranty * BargeSafeTM is a trademark of Sealite Pty Ltd 1 year Specifications subject to change or variation without notice * Subject to standard terms and conditions

56 Bridge Lights LED Sectored Lights This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66 o 180 o 180 o 180 The Sealite Advantage 256 IALA flash patterns, user-adjustable without the need for external devices 4 user-adjustable intensity settings ON/OFF storage switch Bird deterrent spike Typical night marking of bridge structures generally includes; Red or green flashing lights to mark the navigable limits of the channel in accordance with the IALA Maritime Buoyage System located on the bridge piers, under the span, or on buoy and beacons in the water. A range of Sealite marine lanterns may be used to comply with requirements of lighting bridges and structures extending over navigable waterways. The 107mm Sealite LED lens is available in both positive and negative divergence to cater for elevated mounting positions. Bridge lights are typically fixed-on, however a choice of over 256 IALA recommended flash patterns are available as standard. The lights are available as configured to operate from 12v, 110v, or 240v power, or supplied as complete solar/battery systems to comply with requirements of regional governing bodies such as the U.S. Coast Guard, or the IALA Recommendations for the marking of fixed bridges over navigable waters. In U.S. waters for instance, the Coast Guard prescribes certain combinations of fixed lights for bridges and structures extending over waterways. In general, red lights are used to mark piers and supports, and green lights mark the centerline of the navigable channel through a fixed bridge. If there is more than one channel through the bridge, the preferred route is marked by three white lights placed vertically. Red lights are also used on some lift bridges to indicate the lift is closed, and green lights to indicate that the lift is open to vessel traffic. Double-opening swing bridges are lighted with three lanterns on top of the span structure so that when viewed from an approaching vessel the swing span when closed will display three red lights, and when open for navigation will display two green lights. A best point of passage indicated by a white light(s) located under the span and exhibiting a safe water mark character. Partitioning of the Sealite LED reflector allows the lanterns to meet regulatory requirements. Contact your local authority for a full description of bridge marking requirements for your region. For a copy of the IALA Recommendations for the marking of fixed bridges over navigable waters please contact Sealite.

57 Power Calculator Sealite s user-friendly Power Calculator simulates whether lantern operational status is appropriate for the designated geographical location. Lantern intensity readings are also listed with the Power Calculator As a service to it s valued customers, Sealite software engineers have developed an innovative Power Calculator which enables users to estimate and simulate the expected battery life of their solar marine lanterns given local year-round solar conditions. Available on request, this software application can be downloaded directly to any PC or notebook enabling users to immediately access system-wide power calculations and intensities for their specific AtoN installation requirements. Users simply select a Sealite lantern product and any additional options required (such as GPS synchronisation or GSM remote monitoring), the duty cycle, and the location of where the product will be installed, and then a power calculation is charted. If need be, the user can select a lantern product with a smaller/larger solar and battery configuration to ensure year round operation. Graphed data clearly demonstrates the average solar hours per day, battery capacity and surplus current readings over the period of a year to ensure the product is suitable for local conditions. Intensity readings for the range of Sealite marine lantern products and configurations are also available from the Sealite Power Calculator.

58 AIS Monitoring System Battery enclosure in 7-stage powder-coated aluminium, impact resistant housing Adjustable solar module(s) angled to maximise solar collection VHF aerial Available with up to 4 tiers of LEDs (36 ultra-high intensity LEDs per tier) GPS antenna Large industry standard 200mm OD base pattern The Sealite Advantage Complete AIS interface displaying accurate positioning & operational information about the AtoN Low power consumption, making the units ideal for solar and AtoN installations Real time information New information quality to VTS systems IALA Recommendations & ITU Publications (ITU-R M ) Operates on the VHF Maritime Mobile Band Enhances operational awareness Reduces maintenance & call-out costs Sealite s AIS (Automatic Identification System) enabled AtoNs operate on the international VHF Maritime Mobile Band, enabling Port Authorities and other users to remotely monitor the real-time status of their AtoN installations. Mariners in the broadcasting region are provided with crucial Message 21 information (as defined by the International Telecommunications Union (ITU)) such as AtoN operational status and positioning- revolutionizing the VTS system by expanding AtoN information availability to mariners worldwide. The compact AIS AtoN TeleBeacon is available installed within Sealite s range of SL125/C Type 2 Complete Lantern Assemblies, as well as the compact SLC600 Solar Marine Lantern, providing installation flexibility and operational reliability for a range of environmental conditions and demanding duty cycles. Versions of the self-contained TeleBeacon are available without the lantern integration, to enable the benefits of AIS if a visual navaid is not required. The TeleBeacon interacts with most AIS-enabled charts or radar screens, both at sea and ashore, broadcasting imperative information at regular intervals about the type and name of the AtoN, as well as GPS position. With these capabilities, Sealite s AIS enabled AtoNs add a new information quality to VTS systems. In addition, the AIS enabled AtoN broadcasts AIS Message 6 received by the designated base station, allowing the operator to monitor the AtoN for solar and battery voltage, flash code setting, and light status. Meteorological and hydrological data and a host of other parameters can be fitted. Imagine the maintenance and call-out costs saved every year! This fixed frequency telemetry unit operates on the designated AIS1 and AIS2 channels. Sealite s AIS enabled AtoNs were developed in technology partnership with Maritec Ltd, and in accordance with the International Association of Lighthouse Authorities (IALA) Recommendations, and ITU Publications- creating completely integrated, selfcontained AIS enabled AtoNs. AIS enabled NAUTILUS-2200 AIS enabled TRIDENT-3000

59 AIS Monitoring System SL125/C.T2 AIS components AIS enabled SLC600 AIS enabled SL125/C.T2 Operational Information Provided to Base Station User via PC ICAN Software Typical Applications AIS & remote monitoring systems Boundary marking Scientific research projects Security systems Traffic management Fitted to buoys, beacons & lighthouses Marking & identifying off-shore structures (wind farms, oil/gas platforms etc) Contents of AIS Message 21 Name o f A ton Type of AtoN Positioning (latitude & longitude measurement) ON position/off position status Time Stamp Dimensions of the AtoN & Reference Positioning Typical view from port operator console showing vessel data Contents of AIS Message 6* (Transmitted to Base Station) Light status Battery voltage Solar voltage * Additional software upgrade to user base station required to view message 6. Sealite can provide this on request. Typical view from port operator console showing AtoN data, including message 21 (AtoN name / position) and message 6 (lantern diagnostics).

60 GSM Cell-Phone Monitoring & Alarm System Combined GSM/GPS aerial Internal GSM Motorola module Shown without lens Motorola trusted partner The Sealite Advantage Monitor lantern status using any cell-phone or Sealite s secure website user-portal login Reports pre-programmed alarm conditions to designated cell-phone numbers Real time information GSMnetwork- universal standard for mobile communication GSM system uses encryption to make messages more secure Low cost interrogation - cost of standard SMS Internally integrated system available with a range of Sealite lanterns to maintain IP68 waterproof rating Sealite s cost effective GSM Cell-Phone Monitoring and Alarm System provides users with the ability to efficiently monitor the status of their AtoN installations via real-rime data from anywhere in the world. This advanced GSM system (Global System for Mobile Communication) can be internally integrated into a range of Sealite lanterns with no external aerials or base station required. Users simply monitor the status of their installations using a cellular telephone and/or secure web portal access. The GSM Cell-Phone System works via the international standard, fully digital GSM network - the same network used by millions of cell-phone users worldwide when making mobile cell-phone calls, and sending SMS and MMS messages. Sealite lanterns fitted with the GSM Cell-Phone System have an internally integrated Motorola cell-phone module and Sealite proprietary software to enable data transfer between the lantern and designated user s cell-phone (via SMS message) or PC web interface. Maintenance personnel simply send an SMS message to the designated Sealite GSM lantern cell-phone number, and then receive an automatic SMS reply detailing the various pre-set operational conditions. In addition, various alarm conditions can also be activated such as tracking a drifting buoy via GPS that has moved outside a designated area (if mooring is broken etc) or alerting to a potential power disruption. Sealite s innovative GSM system may also be setup to regularly report lantern conditions to a secure user-login portal area of the Sealite website. This provides details of the GSM lanterns operational status, in an easy-to-read PC interface, such as historical graphed data, GPS positioning viewed via internet mapping systems, and day-to-day operational information about each individual lantern over the period of it s service life. The Sealite GSM Monitoring System is secure unauthorised access to the lantern s data cannot occur as only the designated cell-phone numbers programmed into the GSM lantern will respond to a remote SMS. In addition, data transferred to and maintained on the Sealite website is user-password protected. Each lantern is fitted with it s own SIM card, which provides a designated cell-phone contact number for each individual lantern. Any network operator can be used providing they have GSM coverage. Monitoring Conditions Battery voltage Solar module charging current Lantern current draw Lantern position - Latitude and Longitude (including off-station facility) Day/night on status Current flash code setting Internal lantern PCB temperature: Normal/High Available Pre-set Alarms Low battery voltage High PCB temperature Off-station or no GPS data (available when GPS fitted)

61 GSM Cell-Phone Monitoring & Alarm System Monitor GSM lantern installations via Sealite s secure website userlogin portal Shows maximum battery voltage over the last 24 hour period Shows total amount of solar charge added back into the battery system over the last 24 hour period (dependent on local weather conditions) SIM card cell-phone number (international format eg ) Other table data shows operational condition of individual GSM lanterns Shows minimum battery voltage over the last 24 hour period Click on a specific date to view the operational data for that day in the table below View graphed data as a yearly chart (365 day report) or monthly chart Click LOCATE ON MAP to view a map of the position of the GSM/GPS lantern installation Shows GPS positioning of Sealite GSM/GPS lantern on internet mapping system Use navigation tools to zoom in/out of internet map GPS positioning of GSM/GPS lantern viewed via internet mapping system Off-Station Alarm Condition All components of the GSM receiver/transmitter are enclosed within the Sealite lantern body Using the designated cell-phone the operator can set or change offstation coordinates once the AtoN is deployed. If the AtoN moves off-station, the operator can continue to track the location of the unit for safe recovery (providing the system remains in or returns to an area with GSM coverage). Lantern Base Individual SIM cards are easily installed within the base of the GSM lantern

62 GPS Synchronisation Via Internal GPS Module Internal GPS receiver enabling independent lanterns to flash in synchronisation Call Sealite for a free DVD documentary of the GPS synchronised lanterns in operation. The Sealite Advantage Synchronisation of independently flashing lanterns to clearly mark channels and entrances No limitations on distance or objects between lanterns Inbuilt allowing for easy installation Each light operates independently and requires no operator intervention Three (3) satellites need to be in view for the builtin GPS receiver to collect time data Shown with cut-out lens Utilising latest advancements in GPS technology, Sealite has developed an internal synchronisation system which can be incorporated into a range of Sealite lanterns. Sealite s GPS system provides users with the ability to mark a channel, port or river with independently operating lanterns that all flash in synchronisation. This presents a clear outline of the channel each time the lanterns flash, and is particularly effective in overcoming background lighting. The Global Positioning System (GPS) receiver is housed within the Sealite lantern and no additional power supplies, aerials or control systems are required. This lantern option is microprocessor-based and has been designed to provide maximum reliability and performance of the lantern over a wide range of environmental conditions. Using overhead satellites, multiple GPS lanterns set to the same flash pattern will synchronise anywhere in the world. How does it work? Synchronisation is achieved using an internal algorithm based on the highly accurate time base and time data received from the satellites. The satellite data is provided from a number of earth stations using atomic clocks as the time base. At power-up the microprocessor checks that the internal GPS module is programmed correctly and is able to provide valid time base and time data. The light then checks for day/night. If it is daylight the internal microprocessor will go to idle mode after approximately 10 seconds to reduce power consumption. SeaFlare TM Technology The inbuilt GPS receiver and advanced software of the Sealite synchronised lanterns allow for the adoption of SeaFlare TM channel marking - a unique system that cascades the synchronisation of channel lanterns in a uni or bi-directional flash pattern. In Australia, the Port of Melbourne Corporation has adopted this technology from Sealite to clearly identify the channel leading into Station Pier - an area that regularly accommodates some of the world s largest passenger vessels including the QE2. The neighbouring Port of Geelong utilise this technology to safely guide Afromax Tankers among other large sized vessels into harbour. Synchronised SL125-GPS lanterns, Port of Melbourne, Australia

63 RF Synchronisation Via Internal RF Module New Internal RF Module RF Comm-Synch SL70 Lanterns The Sealite Advantage Easy to use simply set lights to the same flash pattern & they will come into synchronisation Clear channel outline achieved through lights flashing in unison Internal RF module no external components Up to 1.5 km operational range between lights extended by each light relaying the message Low-cost This latest innovation is designed to offer a low-cost synchronisation option for applications including rivers, estuaries, marina entrances, channel marking and aquaculture, and can be fitted to a range of Sealite lanterns. Synchronisation benefits vessel operators at night by illuminating the boundary or channel as a clear passage on entrance as opposed to indiscriminant flashing lights which may render the judgment of distance difficult. How does it work? RF Comm-Synch products are fitted with an internal RF module, which operates on a 2.4GHz frequency and has an operational range of 1.5km between 2 lights. Should more than 2 lanterns be required to be synchronised the range may be extended for longer distances as each lantern transmits the data to all adjacent lanterns - causing them to fall into synchronisation. The only limitation is that no lantern should be more than 1.5km from the next lantern in the series. RF Comm-Synch lanterns operate within a peer-to-peer network topology and therefore are not dependent upon master/slave relationships. This means that lights remain synchronised without use of master/slave configurations and each lantern in the network shares both the roles of master and slave. Using innovative software, the additional power consumption is minimal, and in most configurations the solar lantern requires only 1.5hrs of direct sunlight per day to retain full working autonomy. Typical Applications Channel markers Marina entrances Aquaculture zones Perimeter marking Perfect for Aquaculture, Marina Entrances, & Channel & Perimeter Marking Synchronisation is recommended for lanterns operating with up to 20% duty cycles and in regions where typical solar irradiation averages 1.5Kwh per day. Flash characters exceeding this may require lantern intensity adjustment. Synchronisation is achieved via short-range RF communication between lanterns, and relies on line-of-sight operation.

64 Radio Monitoring & Control System The Sealite Advantage Cost effective Unique identifier making it possible to activate and monitor each individual lantern separately Portability No base station or external aerials (for radio controlled lanterns) required An intelligent system with practically unlimited operational range (lanterns relay the message to other lanterns via networking system) Sealite s Radio Control System is designed to permit port and marina authorities to directly control the operation of singular or groups of lanterns. Controlled by a menu drive 2.4GHz handheld transceiver or PC interface, lanterns may be:- Activated or deactivated Flash character changed to any of the 256 codes available Intensity adjusted up to 8 levels Lanterns set to group flash synchronisation Lantern colour changed from green to red and other combinations (up to 3 different colours controlled independently) Sealite s innovative PC interface for the radio control system displays all operator control fields in one easy-to-view and easy-to-select screen. With the handheld radio controller connected to the PC via serial port, the user simply selects the setup fields and sends the ICD Message to the designated lanterns. Typical Applications Waterway control of traffic Indication of periodic closure to designated areas to marine traffic Warnings of discharging of hazardous material

65 Radio Monitoring & Control System RF Aerial LCD screen Battery recharge and PC interface connection Press buttons to select and control light parameters Integrated battery Remotely turn lights ON/OFF, or set to lantern light sensor Set radio lights into groups for independent control Switch between different coloured LED banks The Sealite short-range radio controller can be supplied with a PC interface, allowing users to control light operations from a notebook or desktop computer. SPECIFICATIONS Electrical Characteristics Range 1.5km, peer-to-peer networking Temperature Range -40 to 80 º C Frequency Nominal Voltage 2.4GHz 7.2V dc Autonomy (days) 14 Power Supply Battery Type Battery Capacity Battery Voltage Physical Characteristics Case Material Screen Life Expectancy Certifications CE Quality Assurance Intellectual Property Trademarks Warranty * High grade NiMH - Environment friendly 16Ah 7.2V dc Anodized aluminium Backlit Up to 12 years EN :1997. EN :1997 ISO9001:2000 SEALITE is a registered trademarke of Sealite Pty Ltd 1year Specifications subject to change or variation without notice * Subject to standard terms and conditions

66 WindTalker TM Solar-Powered Ultrasonic Anemometer with GSM Ultrasonic anemometer Reports wind speed and direction via SMS text message to designated mobile phones and PC s 4 x 10watt multicrystalline solar modules, ensuring maximum light collection to charge the battery Internal userreplaceable 55Ah battery The Sealite Advantage Monitor wind speed & direction using any cellphone or Sealite s secure website user-portal login Completely self-contained Real time information GSMnetwork- universal standard for mobile communication Corrosionfree, UVstabilised material All weather sensing technology True operation (no dead band) Ideal for applications that demand economic wind sensing Sealite s WindTalkerTM is a solar-powered ultrasonic anemometer which enables users to remotely access real-time and historical data about the wind speed and direction at the location of their installation via cell-phone (SMS message) or PC web portal interface. The four 10watt multicrystalline solar modules recharge the internal housed battery to power the ultra-sonic anemometer - allowing the unit to be completely self-contained and operate independent from other power sources. Designated users, such as maintenance personnel, simply send an SMS text message to the wind monitor, and receive an automatic reply from the unit indicating accurate wind speed and direction. The WindTalkerTM has an internally integrated Motorola cellphone module and Sealite proprietary software to enable data transfer between the unit and designated user s cell-phone (via SMS message) or PC web interface. In addition various alarm conditions such as high wind speed (user-selectable parameters) and low battery voltage, and daily status reports can also be activated as required. Sealite s innovative GSM enabled WindTalkerTM may also be setup to regularly report wind conditions to a secure user-login portal area of the Sealite website. This provides details of the WindTalkerTM wind speed/direction in an easy-to-read PC interface. Each WindTalkerTM is fitted with it s own SIM card, which provides a designated cellphone contact number for each individual installation. Any network operator can be used providing they have GSM coverage. The ultrasonic anemometer is corrosion-free, and utilises all-weather sensing technology making the unit ideal for land-based and marine environments. Typical Applications Agriculture HVAC Pollution control Portable weather stations Roadside weather stations Tunnels Marine

67 WindTalker TM Solar-Powered Ultrasonic Anemometer with GSM Wind report shows the average wind speed and direction readings over 2 minutes are 5knots North 357 degrees Average wind gust over 10 minutes is 14knots North 11 degrees SMS text message with Wind Report SPECIFICATIONS Anemometer Characteristics Wind Speed Wind Direction Range Operating Temperature Moisture Protection External Construction NMEA O/P Charging Electrical Characteristics Range knots (no dead band) 35 C to +70 C IP65 Polycarbonate Yes Internal regulator Current Draw (ma) 50mA at 12v (approx) Circuit Protection Integrated Nominal Voltage (v) 12 Autonomy (days) 36 Temperature Range 40 to 80 o C Solar Characteristics Solar Module Type Multicrystalline Output (watts) 40 (4 x 10watt) Solar Module Efficiency (%) 14 Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity (Ah) 55 Nominal Voltage (v) 12 Battery Service Life Average 5 years Physical Characteristics Body Material Rotationally moulded UV-stabilised virgin polyethylene Mounting 4x 11mm mounting holes Height (mm/inches) 928 / 36 1 /2 Width (mm/inches) 560 / 22 Mass (kg/lbs) 19 / 41 3 /4 Product Life Expectancy Up to 12 years Certifications CE Quality Assurance Intellectual Property Trademarks Warranty * EN :2001. EN :2001 ISO9001:2000 SEALITE is a registered trademark of Sealite Pty Ltd 1 year Specifications subject to change or variation without notice * Subject to standard terms and conditions

68 SLB600 / SLB mm dia. Marker Buoy Optional solar light available Rotationally moulded to 7mm wall thickness SLB600 SLB610 The SLB610 has an increased float section for additional buoyancy - aiding in deeper water installations. The Sealite Advantage Foam filled with highly buoyant closed-cell polyurethane Stainless steel mooring bush Made from strong, durable UV-stabilised virgin polyethylene Large mooring chain attachment point accommodates 16mm shackle or 12mm silver rope High visibility red, green, white or yellow as per IALA recommendations Range of mooring equipment & chain available 16mm shackle or 12mm silver rope attachment point Excellent buoyancy & stability Mould-in signage to suit customer requirements The SLB600 is a short-range buoy ready for immediate installation. Typical applications include day and night channel, speed zone and restricted area marking. The SLB600 is extremely long-lasting, and is moulded from strong, durable UV-stabilised polyethylene. A large mooring chain attachment point accommodates a 16mm shackle or 12mm silver rope. The complete assembly is only 16kg (35lbs). The unit is available in standard high visibility Yellow, Green, Red and White. One of 165 units installed as perimeter marking, Saudi Arabia Range of mould-in graphics such as 5 Knots available

69 SLB600 / SLB mm dia. Marker Buoy SLB600 SLB610 SPECIFICATIONS SLB600 SLB610 General Characteristics Available Colours Red, Green, White, Yellow as per IALA Recommendations 900 / 35 1 /2 14/ / 10 3 /4 14/ 31 Focal Plain Height (mm/inches) 965 / 38 Total Reserve Buoyancy (kg/lbs) 28 / 62 Draft, Typical (mm/inches) 305 / 12 Maximum Mooring Load (kg/lbs) 28 / 62 Physical Characteristics Material Red, Green, White, Yellow as per IALA Recommendations Rotationally moulded UV-stabilised virgin polyethylene Rotationally moulded UV-stabilised virgin polyethylene Wall Thickness (mm/inches) 7 / 1 /4 7 / 1 /4 Ballast (kg/lbs) 6 / 13 internal concrete 6 / 13 internal concrete Filling Closed-cell polyurethane foam Closed-cell polyurethane foam Height (mm/inches) 1075 / 42 1 / / 44 2 /3 Width (mm/inches) 550 / 21 2 /3 550 / 21 2 /3 Mass (kg/lbs) 16 / / 40 Product Life Expectancy Up to 12 years Up to 12 years Certifications Quality Assurance Intellectual Property Trademarks Warranty * Lantern Options Accessory Options ISO9001:2000 SEALITE is a registered trade mark of Sealite Pty Ltd 1 year Sealite SL15, SL60 or SL70 lantern Mould-in graphics Sealite IALA recommended top marks Radar reflector ISO9001:2000 SEALITE is a registered trade mark of Sealite Pty Ltd 1 year Sealite SL15, SL60 or SL70 lantern Mould-in graphics Sealite IALA recommended top marks Radar reflector Specifications subject to change or variation without notice * Subject to standard terms and conditions

70 SLB mm dia. Marker Buoy Optional solar light available Rotationally moulded to 7mm wall thickness Made from strong, durable UV-stabilised virgin polyethylene Interconnected mooring & lifting eye for additional strength Foam filled with highly buoyant closed-cell polyurethane The Sealite Advantage High visibility red, green, white or yellow as per IALA recommendations Range of mooring equipment & chain available Excellent buoyancy & stability Mould-in signage to suit customer requirements Stainless steel mooring bush SLB700 shown with permanent mould-in graphics Large mooring chain attachment point accommodates 16mm shackle or 12mm silver rope The SLB700 is a short-range buoy ready for immediate installation. Typical applications include day and night channel, speed zone, restricted area marking and aquaculture. The SLB700 is extremely long-lasting, and is moulded in strong, durable UV-stabilised polyethylene. A large mooring chain attachment point accommodates a 16mm shackle or 12mm silver rope. The SLB700 incorporates an interconnected mooring and lifting eye for additional strength, and enables a wider range of installations than the smaller SLB600. The SLB700 is substantially larger than the SLB600, with approximately twice the buoyancy. The top section of the SLB700 has 3 threaded studs, moulded into the buoy to enable easy mounting of either the SL15 1nm, or SL60 or SL70 2nm Solar Lights. The SLB700 can be economically shipped around the globe, with approx. 105pcs and 210pcs being packed in 20ft and 40ft shipping containers respectively. Range of mould-in graphics such as No Boats available

71 SLB mm dia. Marker Buoy SPECIFICATIONS General Characteristics Available Colours Red, Green, White, Yellow as per IALA Recommendations Focal Plain Height (mm/inches) 1265 / 49 3 /4 Total Reserve Buoyancy (kg/lbs) 60 / 132 Draft, Typical (mm/inches) 240 / 9 1 /2 Freeboard (mm/inches) 190 / 7 1 /2 Maximum Mooring Load (kg/lbs) 60 / 132 Physical Characteristics Material Rotationally moulded UV-stabilised virgin polyethylene Wall Thickness (mm/inches) 7 / 1 /4 Ballast (kg/lbs) 18 / 40 internal concrete Filling Closed-cell polyurethane foam Height (mm/inches) 1450 / 57 1 /8 Width (mm/inches) 650 / 25 2/3 Mass (kg/lbs) 33 / 73 Product Life Expectancy Up to 12 years Certifications Quality Assurance ISO9001:2000 Intellectual Property Trademarks Warranty * Lantern Options Accessory Options SEALITE is a registered trade mark of Sealite Pty Ltd 1 year Sealite SL15, SL60 or SL70 lantern Mould-in graphics Sealite IALA recommended top marks Radar reflector * Subject to standard terms and conditions Specifications subject to change or variation without notice

72 SLB mm dia. Navigation Buoy Optional top marks and lights available Made from strong, durable UV-stabilised virgin polyethylene Rotationally moulded to 9mm (float section) and 7mm (top section) wall thickness Foam filled with highly buoyant closed-cell polyurethane 316 grade stainlesssteel mooring post with 18mm mooring eye The Sealite Advantage Complete unit- ready for immediate installation High visibility red, green, white or yellow as per IALA recommendations High night & day visibility 316-grade stainless-steel eye bolt for strong mooring chain attachment point Excellent buoyancy & stability The SLB1250, 1250mm dia. Navigation Buoy, has proven it s superior performance in many parts of Australia and around the world for long-range river and sea navigation. The base is moulded in one-piece strong, coloured, durable polyethylene - filled with highly buoyant polyurethane and UV-stabilised for resistance to sunlight. The strong, lightweight polyethylene buoy top is moulded in standard IALA high visibility colours and shapes to suit a range of installation requirements. A powder-coated extension pole may be supplied to increase the focal height of the Sealite lantern, as well as an additional base section for extra buoyancy. For superior night visibility the SLB1250 may be fitted with a one, two, three or four nautical mile Sealite LED marine lantern. Brass inserts provide a secure mounting for top, tower and signs. A 316-grade stainlesssteel eyebolt passes through the base providing a strong mooring chain attachment point. In addition, all hardware and fittings are 316-grade stainless-steel. Manila Philippines installation

73 SLB mm dia. Navigation Buoy SPECIFICATIONS General Characteristics Available Colours Red, Green, White, Yellow as per IALA Recommendations Focal Plain Height (mm/inches) 1210 / 47 2 /3 (light mounted below top mark), 2050 / 80 3/4 (light mounted above top mark) Total Reserve Buoyancy (kg/lbs) 230 / 507 Draft, Typical (mm/inches) 370 / 14 1 /2 Freeboard (mm/inches) 295 / 11 2 /3 Maximum Mooring Load (kg/lbs) 230 / 507 Physical Characteristics Material Rotationally moulded UV-stabilised virgin polyethylene, 316-grade mooring pole Wall Thickness (mm/inches) 9 / 3 /8 Ballast (kg/lbs) 30 / 66 external counter-weight (optional) Filling Closed-cell polyurethane foam Height (mm/inches) 1180 / 46 1 /2 Width (mm/inches) 1250 / 49 1 /4 Mass (kg/lbs) 70 / 154 Product Life Expectancy Up to 12 years Certifications Quality Assurance ISO9001:2000 Intellectual Property Trademarks Warranty * Lantern Options Accessory Options SEALITE is a registered trade mark of Sealite Pty Ltd 1 year Sealite SL15, SL60, SL70, SLC310 or SLC420 lantern Mould-in graphics Sealite IALA recommended top marks External ballast Remote monitoring (GSM cell-phone) Double base configuration for even greater buoyancy (SLB1250-DB) Radar reflector Specifications subject to change or variation without notice * Subject to standard terms and conditions Available in a range of IALA colours and configurations, optional mould-in graphics and with a wide range of IALA recommended Top Marks

74 TRIDENT mm dia. Ocean Buoy New Navaid location Guard rail Now available with poly-tower section and day marks for increased visibility 316-grade stainless-steel tower assembly Access ladder Internal 10m 2 radar reflector The Sealite Advantage High visibility red, green, white or yellow as per IALA recommendations 3mtr diameter 5mtr focal height Robust construction of 4 quadrant hull sections Lightweight Large battery & payload section Excellent buoyancy & stability Easy to deploy & service 100% recyclable No painting, ever Cost effective & environmentally friendly Convenient forklift access points to safely maneuver the buoy assembly Rotationally moulded to 18mm wall thickness Made from strong, durable UV-stabilised virgin polyethylene The Trident-3000 is one of the largest rotationally-moulded buoys available, with a float diameter of 3 meters and lantern focal height of up to 5 meters. The float section of the Trident-3000 is built from four (4) roto-moulded quadrants, which fasten together to form an incredibly robust 3 meter wide float section standing 1.8m tall. Each quadrant is moulded from UV-stabilised virgin polyethylene, and has an 18mm wall thickness. In addition, each section is filled with closed-cell polyurethane, which prevents the ingress of moisture in the unlikely event of damage. A 316-grade stainless-steel mooring pole runs through the centre of the assembly, to which the tower section is fastened. Two large lifting eyes aid in buoy mooring and periodic servicing. The four-sided tower section of the Trident-3000 provides unsurpassed strength, and is fabricated from 316-grade stainless-steel providing an estimated lifespan in excess of 20 years. Rotationally moulded paneling is fitted to the outside of the tower section to create a large, coloured visual area for marking. The replaceable paneling also simplifies cardinal marking, and gives operators flexibility in stocking spare components. No part of the structure requires painting at any stage of the products lifespan. An integrated ladder with harness attachment points runs vertically up the tower to the top platform. The internal top operational platform is designed to provide a safe working area for contractors. The buoy is lightweight, and can be rested upright on the vessel deck for ease of deployment and final inspection. A large counterweight offers exceptional stability in a variety of exposed regions. The Trident-3000 can be supplied in all IALA colours, and side-panelling is available to aid in clear lateral marking creating a huge visual area. TRIDENT installation, Westernport Bay Environmentally Friendly & Completely Recyclable Sealite buoy products are made from 100% recyclable materials. As a service to customers, individual components and products at the end of their service life may be returned to Sealite for recycling.

75 TRIDENT mm dia. Ocean Buoy Shown with poly-tower SPECIFICATIONS General Characteristics Available Colours Red, Green, White, Yellow as per IALA Recommendations Focal Plain Height (mm/inches) 5000 / 196 Total Reserve Buoyancy (kg/lbs) 6500 / Draft, Typical (mm/inches) 1700 / 66 7 /8 Freeboard (mm/inches) /4 to 300 / 11 3 /4 Maximum Mooring Load (kg/lbs) 2750 / 6063 Physical Characteristics Material Wall Thickness (mm/inches) Ballast (kg/lbs) Filling Height (mm/inches) 6690 / /3 Width (mm/inches) 3000 / /8 Mass (kg/lbs) 2050 / 4515 (depending on payload) Product Life Expectancy >20 years Certifications Quality Assurance Intellectual Property Trademarks Warranty * Lantern Options Accessory Options Rotationally moulded UV-stabilised virgin polyethylene float section, 316-grade stainless-steel mooring pole, 316-grade stainless-steel tower assembly, rotationally moulded UV-stabilised virgin polyethylene top marks and panelling 18 / 3 /4 600 / 1322 external steel Closed-cell polyurethane foam ISO9001:2000 SEALITE is a registered trade mark of Sealite Pty Ltd 1 year Sealite SL60, SL70, SLC310, SLC420 or SL125 series of Mould-in graphics Sealite IALA recommended top marks Rotationally moulded side-panelling Monitoring Systems (AIS, GSM cell-phone) Specifications subject to change or variation without notice * Subject to standard terms and conditions

76 SeaMoor TM Mooring Systems New V Our experience for your convenience IV Sealite can provide turn-key mooring solutions for the range of buoy products, enabling complete systems to be containerised and delivered to customer sites around the world. As a service to valued customers, Sealite has developed an advanced mooring calculator based on IALA guidelines and experience from major users. Known as SeaMoorTM, this facility is available free of charge by contacting Sealite. The system simulates site mooring based on the following easy steps; Step 1. Select Buoy Model Customers select which Sealite buoy they re planning to use in their installation. Step 2. Select Water Depth The Sealite Advantage Complete range of mooring chain & accessories to compliment Sealite buoy products IALA recommended mooring solutions calculated with Sealite advanced SeaMoorTM mooring calculator Flexibility in manufacture to meet various installation requirements & local conditions One-stop for all marine AtoN equipment Customers select the water depth of their proposed installation. Step 3. Confirm Recommended Chain Size The calculator will recommend a chain size at this point, which the customer can confirm or choose a larger or smaller size. The calculator will perform simulations based on this data. Step 4. Set Maximum Wind Speed Users enter the likely maximum wind speed. Wind speed will affect the buoy performance in different ways, depending on the exposed wind area of the navaid. Step 5. Set Maximum Current Customers enter the maximum water speed, which will affect both the buoy and chain. Step 6. Simulate Chain Length The calculator will recommend a chain length at this point, based on the available information entered. Customers can adhere to this information, or select their own length. The calculator will perform simulations based on this data. Step 7. Simulate Sinker Mass The calculator will recommend a sinker mass, based on the available information entered. Customers can adhere to this information, or select their own mass. The calculator will perform simulations based on this data. The calculator will then simulate navaid mooring using all of this available date, and produce a parts list of required components.

77 SeaMoor TM Mooring Systems Sealite Mooring Calculator Select buoy type and installation parameters to view mooring simulation By changing the various mooring parameters (eg. chain length) users can visualise the affect on the installation Buoy Location indicates an approximate watch circle given the mooring chain length and total water depth Shows a list of recommended parts for mooring Sealite s buoy Buoy Depth indicates how deep the buoy will float in the water (draft) Users can check that the Proof Load listed in Step 3 is greater than the Minimum Proof Load. Heavier chain may be required to ensure this

78 POSEIDON mm dia. Ocean Buoy Optional top marks and lights available 316-grade stainless-steel grab rail 316-grade stainless-steel battery access door and compartment Poseidon-1750 Wreck Marking Buoy The Sealite Advantage High visibility red, green, white or yellow as per IALA recommendations 3 part product; flotation section, mid section & top section Individual colouration of each section to suite IALA colour/configuration recommendations Excellent buoyancy & stability Easy to deploy & service No painting, ever Cost effective & environmentally friendly Rotationally moulded to 23mm wall thickness Foam filled with highly buoyant closed-cell polyurethane Made from strong, durable UV-stabilised virgin polyethylene Stainless steel mooring bush The Sealite Poseidon-1750 Buoy is manufactured from UV-stabilised virgin polyethylene and has been specifically designed to withstand the harsh marine environment, and operate reliably with minimal maintenance. Ports worldwide are realising the advantages of polyethylene buoys over traditional steel models. The colour pigment is added to the polyethylene during the moulding process, which means that the buoy never requires painting. The polyethylene material also inhibits marine growth, so the buoy requires cleaning less often than steel types. Significant advantages of the polyethylene buoy allow the interval between servicing to be far greater, and users continually report major cost savings. The Poseidon-1750 is constructed from 3 parts ensuring ease of deployment and servicing. Safe water mark, Australia Optional Day Marks

79 POSEIDON mm dia. Ocean Buoy The section is internally crossbraced ( )using stainless braces joining each mooring eye to the lifting eye. This ensuresmooring and lifting stresses are evenly shared across the structure. SPECIFICATIONS General Characteristics Available Colours Red, Green, White, Yellow as per IALA Recommendations Focal Plain Height (mm/inches) 2500 / 98 3 /8 (standard), 3500 / /4 (with spacer) Total Reserve Buoyancy (kg/lbs) 600 / 1323 Draft, Typical (mm/inches) 680 / 26 3 /4 Freeboard (mm/inches) 400 / 153/4 to 150 / 5 7 /8 Maximum Mooring Load (kg/lbs) 600 / 1323 Physical Characteristics Material Wall Thickness (mm/inches) 23 / 7 /8 Ballast (kg/lbs) 170 / 375 internal concrete Filling Closed-cell polyurethane foam Height (mm/inches) 2940 / 115 3/4 Width (mm/inches) 1750 / 68 7 /8 Mass (kg/lbs) 505 / 1112 Product Life Expectancy Up to 12 years Certifications Quality Assurance ISO9001:2000 Intellectual Property Trademarks Warranty * Lantern Options Accessory Options Rotationally moulded UV-stabilised virgin polyethylene, internal 316-grade stainless-steel bracing, 316-grade stainless-steel fittings, CSIRO slip resistance platform SEALITE is a registered trade mark of Sealite Pty Ltd 1 year Sealite SL60, SL70, SLC310, SLC420 or SL125 series of Mould-in graphics Sealite IALA recommended top marks Monitoring Systems (AIS, GSM cell-phone) Radar reflector Specifications subject to change or variation without notice * Subject to standard terms and conditions POSEIDON installation, India Sealite Poseidon Buoy installation, fitted up with an SLC310 light-head, Sint Maarten

80 NAUTILUS mm dia. Ocean Buoy IALA top mark New d Guard rail Self-contained lantern Internal 10m 2 radar reflector AIS enabled Nautilus grade SS ladder & grab rail Rotationally moulded to 18mm wall thickness Convenient tether points Battery compartment Lifting points Non-slip deck The Sealite Advantage High visibility red, green, white or yellow as per IALA recommendations 2.2mtr diameter 3.2mtr focal height (may be increased to 4mtr) Robust construction, 2-part modular design Internal redundant buoyancy system Lightweight Large battery & payload section Excellent buoyancy & stability Easy to deploy & service 100% recyclable No painting, ever Cost effective & environmentally friendly Innovative guidance keel Internal tie-bars to interconnect lifting & mooring points Made from strong, durable UV-stabilised virgin polyethylene Twin mooring points The Nautilus-2200 is a robust, rotationally-moulded polyethylene ocean buoy designed for offshore port and coastal applications. The buoy is rotationally-moulded by Sealite from UV-stabilised virgin polyethylene, and has a 2.2mtr float diameter and 3.2mtr lantern focal height. Lantern focal height may be increased up to 4mtrs. Built in a 2-part modular design, the buoy can be setup in any IALA recommended assembly, and consists of a high-visibility float section with non-slip tread, and a tower section to support considerable payload. The twin lifting and mooring eyes are interconnected by stainless steel tie bars through the hull structure offering enormous strength and superior longevity of the navaid. Five (5) buoys can be shipped in a 40ft container economically to almost any destination. The Sealite Nautilus-2200 is one of the largest buoys available to incorporate a 1-piece rotationally-moulded hull section, and represents exceptional value for port operators around the world. Sealite Nautilus buoys with SLC420 solar lanterns, Port Philip Bay, Australia Environmentally Friendly & Completely Recyclable Sealite buoy products are made from 100% recyclable materials. As a service to customers, individual components and products at the end of their service life may be returned to Sealite for recycling.

81 NAUTILUS mm dia. Ocean Buoy SPECIFICATIONS General Characteristics Available Colours Red, Green, White, Yellow as per IALA Recommendations Focal Plain Height (mm/inches) 3200 / 126 Total Reserve Buoyancy (kg/lbs) 950 / 2094 Draft, Typical (mm/inches) 920 / 36 1 /4 Freeboard (mm/inches) 550 / 21 5 /8 Maximum Mooring Load (kg/lbs) 950 / 2094 Physical Characteristics Material Wall Thickness (mm/inches) 18 / 3/4 Ballast (kg/lbs) 350 / 772 internal concrete Filling Redundency chambers Height (mm/inches) 4120 / /4 Width (mm/inches) 2200 / 86 2 /3 Mass (kg/lbs) 1000 / 2203 Product Life Expectancy >20 years Certifications Quality Assurance ISO9001:2000 Intellectual Property Trademarks Warranty * Lantern Options Accessory Options Rotationally moulded UV-stabilised virgin polyethylene, internal 316-grade stainless-steel bracing, 316-grade stainless-steel grab rail and ladder SEALITE is a registered trade mark of Sealite Pty Ltd 1 year Sealite SL60, SL70, SLC310, SLC420 or SL125 series of Mould-in graphics Sealite IALA recommended top marks Rotationally moulded side-panelling Monitoring Systems (AIS, GSM cell-phone) Specifications subject to change or variation without notice * Subject to standard terms and conditions The tower and battery compartment allows for incorporation of additional batteries to drive ancillary equipment to increase the working autonomy of the navaid in lower sunlight conditions. Convenient Forklift Access Points to Safely Maneuver the Buoy Assembly Ultrasonic Testing Ensures Consistency of Wall Thickness in Key Areas such as Mooring Points

82 Buoy Configurations for IALA Regions A and B REGION A REGION A& B Port Hand Mark Starboard Hand Mark Preferred Channel to Starboard Preferred Channel to Port North Cardinal Mark South Cardinal Mark West Cardinal Mark East Cardinal Mark REGION B Port Hand Mark Starboard Hand Mark Preferred Channel to Starboard Preferred Channel to Port Isolated Danger Mark Safe Water Mark Special Mark The Sealite buoy division provides turn-key production of navigation buoys from tooling development, raw material selection and production, to final testing and inspection. Keeping this entire process in-house allows Sealite to guarantee the superior quality of it s products and ensures fast turnaround times. Each buoy product is rotationally-moulded from UV stabilised virgin polyethylene, with individual components of Sealite s larger buoy products moulded in various colours to suit a range of IALA recommended configurations. Why Choose Polyethylene Buoys? No Painting Inhibits Growth Increased interval between servicing Routine maintenance on location Easily repaired in the unlikely event of damage Lightweight for ease of deployment and maintenance Environment friendly - no use of toxic antifouling paint

83 Accessories MC/01 Post mounting plate to suit SL07 & SL15 50mm ID MC/02 Post mounting plate to suit standard base SL60 50mm ID MC/03 Post mounting plate to suit 200mm OD base pattern lanterns including SL60-LB, SL70, SLC310, SLC420 & SL125 50mm ID MC/04 Post mounting stand to suit SL10, SL50 & SL23 series 50mm OD post, 3-hole 200mm OD base pattern The Sealite Advantage Sealite manufactures a large range of marinegrade accessories to compliment navigation lantern and buoy products All listed hardware is aluminium, 7-stage powder-coated WHITE, unless otherwise stated. MC/05 90 degree wall mounting stand 50mm OD Contact Sealite today for further information MC/06 Adaptor plate to suit SLC mm OD mount MC/07 Adaptor plate to suit SLC mm OD mount MC/08 Adaptor plate to suit SLC mm OD mount MC/09 Buoy mounting plate to affix SL15 lantern to SLB600, SLB610 & SLB700 buoys

84 Accessories MC/10 Buoy mounting plate to affix standard base SL60 lantern to SLB600, SLB610 & SLB700 buoys MC/11 Buoy mounting plate to affix SL70 lantern to SLB600, SLB610 & SLB700 buoys MC/12 Polyethylene multi-mount to suit SLC310 & SLC420 Converts 4-hole to 3-hole base mounts MC/13 Lantern spacer Converts 3/4 hole mounting patterns 200mm OD MC/ grade SS bolt set to suit SL15 hardware M5 x 20mm MC/ grade SS bolt set to suit standard base SL60 hardware M4 x 20mm MC/ grade SS bolt set to suit SL70 & SL125 hardware M8 x 25mm MC/ grade SS bolt set to suit SLC310 & SLC420 hardware M8 x 30mm MC/ grade SS bolt set to suit SLC400, SLC500 & SLC600 hardware M8 x 20mm

85 MARINE LAMPS Phone: (03) Fax: (03) Mobile: Web: Lateral Technology 2009

86 SOLAR PANELS Mono & Polycrystalline UniSolar Flexible Panels Regulators Plasmatronics Morningstar PECAN Engineering Phone: (03) Fax: (03) Mobile: Web: Lateral Technology 2009

87 LATERAL T E C H N O L O G Y Marine Navigation Aids SOLAR / MARINE APPLICATION BATTERIES Phone: (03) Fax: (03) Mobile: sales@lateraltechnology.com.au Web: Lateral Technology 2009