WIRELESS TRANSMITTERS... 1 PRODUCT SELECTION GUIDES...

Transcription

1

2 CONTENTS WIRELESS TRANSMITTERS... 1 PRODUCT SELECTION GUIDES... 9 sensor characteristics... 9 sensor selection guide...10

3 WIRELESS TRANSMITTERS Our wireless transmitters have a proven and field tested coverage in various references around Europe. Effective bidirectional communication with good diagnostics through Modbus communication or analogue signal makes the network reliable and functional. The system includes transmitters for both indoor and outdoor use with repeaters, configuration tool and network functionality monitoring tool. Ideal for monitoring temperature, humidity, air quality, light level, occupancy or pulse counting. Proven coverage Reliable and functional network 868 MHz frequency Modbus PRODUAL 1 CATALOGUE

4 WIRELESS BASE STATION FLTA is a base station for wireless network transmitters. From FLTA, the controls and measurements can be read via Modbus RTU and through the 8 analogue outputs. FLTA base station needs a FLAN antenna. 24 Vac/dc, < 2 VA Range Output Protection class TYPE ART NO. up to 500 m in the line of sight, m in buildings 8 x Vdc, Modbus RTU IP20 For 35 mm DIN rail FLTA base station for wireless sensors FLAN antenna WIRELESS CONFIGURATION TOOL FLSER is a wireless configuration tool for setting the addresses of the sensors and the wireless repeaters. The tool can also be used for testing the communication signal strength. 3,6 V lithium battery Protection class IP20 Materials ABS plastic Dimensions 86 x 86 x 32 mm FLSER configuration tool for wireless devices 7 PRODUAL 2 CATALOGUE

5 WIRELESS REPEATERS FLREP repeaters can be used to extend the range of wireless sensors in difficult environments. It is possible to use up to 8 repeaters for one FLTA base station. 24 Vac/dc, < 0.1 VA / 12 Vac/dc Dimensions 86 x 86 x 32 mm FLREP wireless repeater with internal antenna, for indoor use (IP20) FLREP-U wireless repeater with external antenna, for outdoor use (IP54) M230/ Vac/12 Vdc 4 VA power supply WIRELESS TRANSMITTERS TEFL wireless room temperature sensors are designed for temperature detection of indoor spaces. The communication between the TEFL room units and the FLTA base station is two-way. Commissioning is done by using the wireless FLSER configuration tool. room C, %rh 7 3,6 V lithium battery Range C Accuracy Protection class Material Dimensions ±0,5 C (25 C) IP20 ABS plastic with screws on wall or on junction box (hole distance 60 mm) 86 x 86 x 32 mm TEFL wireless room sensor TEFL-P wireless room sensor with set point adjustment TEFL-RH wireless room sensor with %rh TEFL-RH-P wireless room sensor with %rh and set point setting OPTIONS FL-DI DI option for TEFL FL-S S5 switch option for TEFL FL-N display option for TEFL PRODUAL 3 CATALOGUE

6 WIRELESS TRANSMITTERS TEUFL is a wireless sensor for detecting outdoor temperatures. Communication between the sensors and the FLTA base station is two-way. In addition to temperature information, TEUFL sensor can send also one V signal or one contact (DI) information (TEUFL-DI). Commissioning is done by using the wireless FLSER configuration tool. outdoors C, V 3,6 V lithium battery Input Vdc Range (temperature) C (TEUFL-DI: C) Range (voltage) Vdc Accuracy (temperature) ±0,5 C (25 C) Protection class IP54, cable downwards Material PC plastic Cable gland M16 with screws, external lugs TEUFL wireless outdoor temperature sensor TEUFL wireless outdoor temperature sensor, 24 Vac/dc supply TEUFL-DI wireless outdoor temperature sensor, with a contact (DI) input WIRELESS TRANSMITTERS KLUFL is a wireless transmitter for detecting outdoor temperatures and humidity. The communication between the sensors and the FLTA base station is two-way. Commissioning is done by using the wireless FLSER configuration tool. LUX 11 illumination sensor can be connected to the KLUFL transmitter. outdoors C, %rh, (lx) 7 3,6 V lithium battery Range (humidity) %rh Range (temperature) C Range (illuminance) lx Protection class IP54, cable downwards Material PC plastic Cable gland M16 with screws, external lugs KLUFL wireless outdoor humidity and temperature transmitter LUX illumination and temperature sensor ( 10) LUX illumination and temperature sensor ( 20) PRODUAL 4 CATALOGUE

7 WIRELESS TRANSMITTERS HDHFL transmitters are designed for detecting carbon dioxide concentration and temperature in the room spaces. HDHFL-RH transmitters have also a humidity output. Commissioning is done by using the wireless FLSER configuration tool. room ppm CO₂, C, %rh 24 Vac/dc, < 2 VA Range (CO₂) ppm Range (temperature) C Range (humidity) Time constant Accuracy (CO₂) Accuracy (temperature) Accuracy (humidity) Output Protection class %rh < 1,5 min typ. ±40 ppm ±3 % of value ±0,5 C (25 C) ±2 %rh 3 x Vdc, 2 ma IP20 Ambient temperature C Materials Dimensions TYPE ART NO. with screws on wall or on junction box (hole distance 60 mm) ABS plastic 87 x 86 x 30 mm HDHFL CO₂ and C transmitter with wireless communication HDHFL-N CO₂ and C transmitter with wireless communication and with display HDHFL-RH CO₂, C and %rh transmitter with wireless communication HDHFL-RH-N CO₂, C and % rh transmitter with wireless communication and with display WIRELESS OCCUPANCY SENSOR 7 LAFL is a wireless detector for occupancy monitoring movement. The detector is passive infrared (PIR) which reacts to temperature changes. The communication between the sensors and the FLTA base station is two-way. Commissioning is done by using the wireless FLSER configuration tool. bracket and screws are included to the delivery. 3,6 V lithium battery Range monitoring area 140 ; LAFL-LX: lx Protection class IP40 Ambient temperature C LAFL wireless PIR detector LAFL-LX wireless PIR detector with illumination ( lx) PRODUAL 5 CATALOGUE

8 WIRELESS TRANSMITTERS PAFL is a wireless pulse counter. The counter can be used to measure pulses from electricity consumption meters, gas flow meters and water consumption meters. Commissioning is done by using the wireless FLSER configuration tool. 3,6 V lithium battery or 24 Vac/dc Protection class IP54, cable downwards Material PC plastic Pulse frequency max. 20 Hz Minimum pulse duration 25 ms Ambient temperature C Cable gland M16 with screws, external lugs PAFL wireless pulse counter TOOL FOR MONITORING WIRELESS NETWORK FLSNIF is a tool for monitoring the functionality of the wireless network. By using this tool you may follow one by one the signals between the wireless field equipment and the base station. Monitoring is possible only for signals which are available at the very moment. A PC with installed monitoring software is needed with the tool. The software is delivered with the tool. 7 TYPE ART NO. FLSNIF tool for monitoring the wireless network PRODUAL 6 CATALOGUE

9 SENSOR CHARACTERISTICS Sensor element Pt 100 Pt 1000 Ni 1000 Ni LG AN 10-C 10- KB KP 10 T1 Tol. ±0,3 C/ 0 C EN60751 B ±0,3 C/ 0 C EN60751 B ±0,4 C/ 0 C DIN43760 ±0,4 C/0 C tcr 5000ppm Siemens ±0,3 C/ TAC ±0,/ Johnson ±0,/ ±0,/ Trend / Distech ±0,/ H&W ±0./ Andover ±0./ Carel ±0.5 C/ LM235Z 10 mv/k ±0,4 C/ 0 C Temp. C Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω V Ω , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , PRODUAL 7 CATALOGUE

10 SELECTION GUIDE Product Measured property Type Page C RH CO2 VOC CO Pa bar m/s m 3 /s lux W/m 2 H2O PIR Qty IVL 2 TUNA UV7-LY 18 VS PEL 3~4 PEK / CPS 21 IML 4 KLH 6 KLK 8 KLHJ 7 KLU 7 KLUFL wireless 1) LUX 8~9 MMSP1 10 VPEL 10 VPL 11 HDH 12 HDHFL wireless HDK 13 HDU 14 ILH 15 ILK 16 HML 17 TEAT controller TENA controller TEKV Temp TEV Temp TEP Temp TEPK Temp TEK Temp TEKHA Temp TEKA Temp TEKY Temp TEL Temp TEM Temp TESK Temp TEHR Temp TEHU Temp TEU Temp TES Temp LUK V2 LLK V2 Temp Temp TEUFL wireless TEFL wireless LA 22 LAFL wireless PLT 23 KA SA VVA / VVN 24~25 PAFL wireless 1) Separate light sensor needed. Ω V ma relay Modbus BACnet wireless Output PRODUAL 8 CATALOGUE