SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS

Transcription

1 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 Inputs Are TTL-Voltage Compatible Schmitt-Trigger Circuitry On A, B, and CLR Inputs for Slow Input Transition Rates Edge Triggered From Active-High or Active-Low Gated Logic Inputs Retriggerable for Very Long Output Pulses Overriding Clear Terminates Output Pulse Latch-Up Performance Exceeds 100 ma Per JESD 78, Class II ESD Protection Exceeds JESD V Human-Body Model (A114-A) 200-V Machine Model (A115-A) 1000-V Charged-Device Model (C101) description/ordering information These edge-triggered multivibrators feature output pulse-duration control by three methods. In the first method, the A input is low, and the B input goes high. In the second method, the B input is high, and the A input goes low. In the third method, the A input is low, the B input is high, and the clear (CLR) input goes high. The output pulse duration is programmed by selecting external resistance and capacitance values. The external timing capacitor must be connected between C ext and R ext /C ext (positive) and an external resistor connected between R ext /C ext and V CC. To obtain variable pulse durations, connect an external variable resistance between R ext /C ext and V CC. The output pulse duration also can be reduced by taking CLR low. SN54AHCT123A...J OR W PACKAGE SN74AHCT123A... D, DB, DGV, N, OR PW PACKAGE (TOP VIEW) 1A 1B 1CLR 1Q 2Q 2C ext 2R ext /C ext GND V CC 1R ext /C ext 1C ext 1Q 2Q 2CLR 2B 2A SN54AHCT123A... FK PACKAGE (TOP VIEW) 1CLR 1Q NC 2Q 2C ext 1B 1A ext/cext 2R NC V CC 1R ext/cext GND NC 2A 2B NC No internal connection 1C ext 1Q NC 2Q 2CLR TA ORDERING INFORMATION PACKAGE ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP N Tube SN74AHCT123AN SN74AHCT123AN Tube SN74AHCT123AD SOIC D AHCT123A Tape and reel SN74AHCT123ADR 40 C to85 C SSOP DB Tape and reel SN74AHCT123ADBR HB123A TSSOP PW Tape and reel SN74AHCT123APWR HB123A TVSOP DGV Tape and reel SN74AHCT123ADGVR HB123A CDIP J Tube SNJ54AHCT123AJ SNJ54AHCT123AJ 55 C to 125 C CFP W Tube SNJ54AHCT123AW SNJ54AHCT123AW LCCC FK Tube SNJ54AHCT123AFK SNJ54AHCT123AFK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright 2003, Texas Instruments Incorporated On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX DALLAS, TEXAS

2 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 description/ordering information(continued) Pulse triggering occurs at a particular voltage level and is not directly related to the transition time of the input pulse. The A, B, and CLR inputs have Schmitt triggers with sufficient hysteresis to handle slow input transition rates with jitter-free triggering at the outputs. Once triggered, the basic pulse duration can be extended by retriggering the gated low-level-active (A) or high-level-active (B) input. Pulse duration can be reduced by taking CLR low. CLR input can be used to override A or B inputs. The input/output timing diagram illustrates pulse control by retriggering the inputs and early clearing. The variance in output pulse duration from device to device typically is less than ±0.5% for given external timing components. An example of this distribution for the AHCT123A is shown in Figure 10. Variations in output pulse duration versus supply voltage and temperature are shown in Figure 6. During power up, Q outputs are in the low state, and Q outputs are in the high state. The outputs are glitch free, without applying a reset pulse. For additional application information on multivibrators, see the application report, Designing With the SN74AHC123A and SN74AHCT123A, literature number SCLA014. FUNCTION TABLE (each multivibrator) INPUTS OUTPUTS CLR A B Q Q L X X L H X H X L H X X L L H H L H H L H These outputs are based on the assumption that the indicated steady-state conditions at the A and B inputs have been set up long enough to complete any pulse started before the setup. logic diagram, each multivibrator (positive logic) Rext/Cext A Cext B Q CLR R Q 2 POST OFFICE BOX DALLAS, TEXAS 75265

3 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 input/output timing diagram trr A B CLR Rext/Cext Q Q tw tw tw + trr absolute maximum ratings over operating free-air temperature (unless otherwise noted) Supply voltage range, V CC (see Note 1) V to 7 V Input voltage range, V I (see Note 2) V to 7 V Output voltage range, V O (see Note 1) V to V CC V Input clamp current, I IK (V I < 0) ma Output clamp current, I OK (V O < 0 or V O > V CC ) ±20 ma Continuous output current, I O (V O = 0 to V CC ) ±25 ma Continuous current through V CC or GND ±50 ma Package thermal impedance, θ JA (see Note 3): D package C/W DB package C/W DGV package C/W N package C/W PW package C/W Storage temperature range, T stg C to 150 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to the network ground terminal. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 3. The package thermal impedance is calculated in accordance with JESD POST OFFICE BOX DALLAS, TEXAS

4 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 recommended operating conditions (see Note 4) SN54AHCT123A SN74AHCT123A MIN MAX MIN MAX VCC Supply voltage V VIH High-level input voltage 2 2 V VIL Low-level input voltage V VI Input voltage V VO Output voltage 0 VCC 0 VCC V IOH High-level output current 8 8 ma IOL Low-level output current 8 8 ma Rext External timing resistance 1k 1k Ω t/ VCC Power-up ramp rate 1 1 ms/v TA Operating free-air temperature C NOTE 4: Unused Rext/Cext terminals should be left unconnected. All remaining unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC VOH VOL IOH = 50 A IOH = 8 ma IOL = 50 A IOL = 8 ma 45V V 4.5 TA = 25 C SN54AHCT123A SN74AHCT123A MIN TYP MAX MIN MAX MIN MAX Rext/Cext VI = VCC or GND 5.5 V ±0.25 ±2.5 ±2.5 II A, B, and CLR VI = VCC or GND 0 V to 5.5 V ±0.1 ±1* ±1 ICC Quiescent VI = VCC or GND, IO = V A ICC ICC Active state (per circuit) VI = VCC or GND, Rext/Cext = 0.5 VCC One input at 3.4 V, Other inputs at VCC or GND UNIT UNIT 5.5 V A 5.5 V ma Ci VI = VCC or GND 5 V pf * On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V. This test is performed with the terminal in the off-state condition. This is the increase in supply current for each input at one of the specified TTL voltage levels rather than 0 V or VCC. timing requirements over recommended operating free-air temperature range, V CC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) V V A TA = 25 C SN54AHCT123A SN74AHCT123A TEST CONDITIONS MIN TYP MAX MIN MAX MIN MAX Pulse CLR tw duration A or B trigger UNIT ns Rext = 1 kω, Cext = 100 pf 60 ns trr Pulse retrigger time Rext = 1 kω, Cext = 0.01 F 1.5 s See retriggering data in the application information section. 4 POST OFFICE BOX DALLAS, TEXAS 75265

5 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 switching characteristics over recommended operating free-air temperature range, V CC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tplh tphl tplh tphl tplh tphl tplh tphl tplh tphl tplh tphl tw FROM TO TEST TA = 25 C SN54AHCT123A SN74AHCT123A (INPUT) (OUTPUT) CONDITIONS MIN TYP MAX MIN MAX MIN MAX A or B Q or Q CL = 15 pf CLR Q or Q CL = 15 pf CLR ti trigger Q or Q CL =15pF A or B Q or Q CL = 50 pf CLR Q or Q CL = 50 pf CLR ti trigger Q or Q CL =50pF Q or Q CL = 50 pf, Cext = 28 pf, Rext = 2 kω CL = 50 pf, Cext = 0.01 µf, Rext = 10 kω CL = 50 pf, Cext = 0.1 µf, Rext = 10 kω 5.3* 10* 1* 13* * 10* 1* 13* * 12* 1* 15* * 12* 1* 15* * 13* 1* 16* * 13* 1* 16* UNIT ns s ms tw ±1 % * On products compliant to MIL-PRF-38535, this parameter is not production tested. tw = Pulse duration at Q and Q outputs tw = Output pulse-duration variation (Q and Q) between circuits in same package operating characteristics, V CC = 5 V, T A = 25 C PARAMETER TEST CONDITIONS TYP UNIT Cpd Power dissipation capacitance No load 29 pf ns ns ns ns ns ns POST OFFICE BOX DALLAS, TEXAS

6 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point tw 3 V CL (see Note A) Inputs 1.5 V 1.5 V 0 V LOAD CIRCUIT Outputs 50% VCC 50% VCC VOH VOL Input A (see Note B) Input B (see Note B) In-Phase Output Out-of-Phase Output tplh tphl 1.5 V 1.5 V 50% VCC 50% VCC VOLTAGE WAVEFORMS DELAY TIMES 3 V 0 V 3 V 0 V VOH VOL VOH VOL Input CLR (see Note B) In-Phase Output Out-of-Phase Output 50% VCC NOTES: A. B. CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: ZO = 50 Ω, tr 3 ns, tf 3 ns. C. The outputs are measured one at a time with one input transition per measurement. tplh tphl Figure 1. Load Circuit and Voltage Waveforms VOLTAGE WAVEFORMS PULSE DURATION 1.5 V 1.5 V 50% VCC VOLTAGE WAVEFORMS DELAY TIMES tphl VOH 50% VCC VOL tplh 3 V 0 V VOH 50% VCC VOL 6 POST OFFICE BOX DALLAS, TEXAS 75265

7 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS APPLICATION INFORMATION SCLS420G JUNE 1998 REVISED APRIL 2003 caution in use To prevent malfunctions due to noise, connect a high-frequency capacitor between V CC and GND, and keep the wiring between the external components and C ext and R ext /C ext terminals as short as possible. power-down considerations Large values of C ext may cause problems when powering down the AHCT123A devices because of the amount of energy stored in the capacitor. When a system containing this device is powered down, the capacitor may discharge from V CC through the protection diodes at pin 2 or pin 14. Current through the input protection diodes must be limited to 30 ma; therefore, the turn-off time of the V CC power supply must not be faster than t = V CC C ext /30 ma. For example, if V CC = 5 V and C ext = 15 pf, the V CC supply must turn off no faster than t = (5 V) (15 pf)/30ma = 2.5 ns. Usually, this is not a problem because power supplies are heavily filtered and cannot discharge at this rate. When a more rapid decrease of V CC to zero occurs, the AHCT123A devices may sustain damage. To avoid this possibility, use external clamping diodes. output pulse duration The output pulse duration, t w, is determined primarily by the values of the external capacitance (C T ) and timing resistance (R T ). The timing components are connected as shown in Figure 2. VCC RT CT To Rext/Cext Terminal To Cext Terminal The pulse duration is given by: t w K R T C T Figure 2. Timing-Component Connections if C T is 1000 pf, K = 1.0 or if C T is < 1000 pf, K can be determined from Figure 5 where: t w = pulse duration in ns R T = external timing resistance in kω C T = external capacitance in pf K = multiplier factor Equation 1 and Figure 3 can be used to determine values for pulse duration, external resistance, and external capacitance. (1) POST OFFICE BOX DALLAS, TEXAS

8 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 APPLICATION INFORMATION retriggering data The minimum input retriggering time (t MIR ) is the minimum time required after the initial signal before retriggering the input. After t MIR, the device retriggers the output. Experimentally, it also can be shown that to retrigger the output pulse, the two adjacent input signals should be t MIR apart, where t MIR = 0.30 t w. The retrigger pulse duration is calculated as shown in Figure 3. tmir Input trt = tw + tplh = (K RT CT) + tplh Output tplh trt tw Where: tmir = Minimum Input Retriggering Time tplh = Propagation Delay trt = Retrigger Time tw = Output Pulse Duration Before Retriggering Figure 3. Retrigger Pulse Duration The minimum value from the end of the input pulse to the beginning of the retriggered output should be approximately 15 ns to ensure a retriggered output (see Figure 4). Input tmrt Output tmrt= Minimum Time Between the End of the Second Input Pulse and the Beginning of the Retriggered Output tmrt= 15 ns Figure 4. Input/Output Requirements 8 POST OFFICE BOX DALLAS, TEXAS 75265

9 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS APPLICATION INFORMATION SCLS420G JUNE 1998 REVISED APRIL E E+08 VCC = 5 V TA = 25 C 1.00E+07 RT = 200k Ω Output Pulse Duration ns t w 1.00E E E E+03 RT = 80k Ω RT = 150k Ω RT = 5k Ω RT = 10k Ω 1.00E+02 RT = 1k Ω 1.00E E CT External Timing Capacitance pf Figure 5. Output Pulse Duration vs External Timing Capacitance Variation in Output Pulse Duration 14% 12% 10% 8% 6% 4% 2% 0% 2% tw = 866 ns at: VCC = 5 V, RT = 10 kω CT = 50 pf TA = 25 C VCC = 2.5 V VCC = 3 V VCC = 3.5 V VCC = 4 V VCC = 5 V VCC = 6 V VCC = 7 V 4% 6% Temperature C 180 Figure 6. Variations in Output Pulse Duration vs Temperature Operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. POST OFFICE BOX DALLAS, TEXAS

10 SN54AHCT123A, SN74AHCT123A DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS SCLS420G JUNE 1998 REVISED APRIL 2003 APPLICATION INFORMATION t rr Minimum Retrigger Time µs RT = 1 kω TA = 25 C MINIMUM TRIGGER TIME vs V CC CHARACTERISTICS CT = 0.01 µf CT = 1000 pf CT = 100 pf Output Pulse-Duration Constant K OUTPUT PULSE-DURATION CONSTANT vs SUPPLY VOLTAGE RT = 10 kω TA = 25 C tw = K CT RT CT = 1000 pf CT = 0.01 µf CT = 0.1 µf VCC Supply Voltage V Figure VCC Supply Voltage V Figure 8 C T External Capacitor Value µf EXTERNAL CAPACITANCE vs MULTIPLIER FACTOR For Capacitor Values of µf or Greater, K = 1.0 (K is Independent of R) TA = 25 C VCC = 5 V Relative Frequency of Occurance VCC = 5 V TA = 25 C CT = 50 pf RT = 10 k DISTRIBUTION OF UNITS vs OUTPUT PULSE DURATION Mean = 856 ns Median = 856 ns Std. Dev. = 3.5 ns 3 Std. Dev. +3 Std. Dev. Median 99% of Data Units Multiplier Factor K tw Output Pulse Duration Figure 9 Figure 10 Operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. 10 POST OFFICE BOX DALLAS, TEXAS 75265

11 PACKAGE OPTION ADDENDUM 24-Aug-2018 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp ( C) Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to Q2A SNJ54AHCT 123AFK Device Marking QEA ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to QE A SNJ54AHCT123AJ QFA ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to QF A SNJ54AHCT123AW SN74AHCT123AD ACTIVE SOIC D Green (RoHS & no Sb/Br) SN74AHCT123ADBR ACTIVE SSOP DB Green (RoHS & no Sb/Br) SN74AHCT123ADGVR ACTIVE TVSOP DGV Green (RoHS & no Sb/Br) SN74AHCT123ADR ACTIVE SOIC D Green (RoHS & no Sb/Br) SN74AHCT123AN ACTIVE PDIP N Green (RoHS & no Sb/Br) SN74AHCT123APWR ACTIVE TSSOP PW Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT123A CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB123A CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB123A CU NIPDAU Level-1-260C-UNLIM -40 to 85 AHCT123A CU NIPDAU N / A for Pkg Type -40 to 85 SN74AHCT123AN CU NIPDAU Level-1-260C-UNLIM -40 to 85 HB123A SNJ54AHCT123AFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to Q2A SNJ54AHCT 123AFK SNJ54AHCT123AJ ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to QE A SNJ54AHCT123AJ SNJ54AHCT123AW ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to QF A SNJ54AHCT123AW (4/5) Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. Addendum-Page 1

12 PACKAGE OPTION ADDENDUM 24-Aug-2018 NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54AHCT123A, SN74AHCT123A : Catalog: SN74AHCT123A Military: SN54AHCT123A NOTE: Qualified Version Definitions: Catalog - TI's standard catalog product Addendum-Page 2

13 PACKAGE OPTION ADDENDUM 24-Aug-2018 Military - QML certified for Military and Defense Applications Addendum-Page 3

14 PACKAGE MATERIALS INFORMATION 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W (mm) Pin1 Quadrant SN74AHCT123ADBR SSOP DB Q1 SN74AHCT123ADGVR TVSOP DGV Q1 SN74AHCT123ADR SOIC D Q1 SN74AHCT123APWR TSSOP PW Q1 Pack Materials-Page 1

15 PACKAGE MATERIALS INFORMATION 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHCT123ADBR SSOP DB SN74AHCT123ADGVR TVSOP DGV SN74AHCT123ADR SOIC D SN74AHCT123APWR TSSOP PW Pack Materials-Page 2

16

17

18

19 MECHANICAL DATA MPDS006C FEBRUARY 1996 REVISED AUGUST 2000 DGV (R-PDSO-G**) 24 PINS SHOWN PLASTIC SMALL-OUTLINE 0,40 0,23 0,13 0,07 M ,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 1 12 A 0 8 0,25 0,75 0,50 1,20 MAX 0,15 0,05 Seating Plane 0,08 DIM PINS ** A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11, /E 08/00 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. D. Falls within JEDEC: 24/48 Pins MO /16/20/56 Pins MO-194 POST OFFICE BOX DALLAS, TEXAS 75265

20

21

22

23

24 MECHANICAL DATA MSSO002E JANUARY 1995 REVISED DECEMBER 2001 DB (R-PDSO-G**) 28 PINS SHOWN PLASTIC SMALL-OUTLINE 0,65 0,38 0,22 0,15 M ,60 5,00 8,20 7,40 0,25 0,09 Gage Plane ,25 A 0 8 0,95 0,55 2,00 MAX 0,05 MIN Seating Plane 0,10 DIM PINS ** A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12, /E 12/01 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150 POST OFFICE BOX DALLAS, TEXAS 75265

25

26 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI s published terms of sale for semiconductor products ( apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, Designers ) understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI s provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, TI Resources ) are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer s company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI s provision of TI Resources does not expand or otherwise alter TI s applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED AS IS AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer s noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box , Dallas, Texas Copyright 2018, Texas Instruments Incorporated