Corsix R 32 Accu PRODUCT DATA

Transcription

1 PRODUCT DATA

2 Product data Rev. 1 (April 2011) Page Description and Configurations 3 Technical Features 4 Radiological characteristics 4 Operating characteristics 5 Mechanical characteristics 6 Size and dimensions 7 Classifications 7 Installation and warranty 7 ITALRAY 2/8

3 DESCRIPTION (maximum power: 32 kw) is a mobile x-ray unit with +90 /-90 rotation of the the x-ray monoblock arm. Built with innovative design and advanced technology, has been made to perform radiologic examinations and diagnostic investigations both in the department (Operating room, Sports Medicine, Plaster Room, Emergency Department, Paediatrics, Orthopaedics ) and in the ward. For these applications results strongly important its power supply voltage mode, in fact this unit can operate independently either with batteries or line network to single-phase 230 Vac. This gives to an operating autonomy with batteries that allows up to 100 x-ray exposures. operates with two-points radiological technique with selection of kv/mas. ma values and exposure time are always selected and displayed, automatically by the microprocessor, on the touch screen control panel before each exposure. Up to 240 examinations can be programmed and recalled. Programming by means of the alphanumerical keypad on the touch-screen, allows both name (ex. chest, abdomen,..) and the parameters (kv and ma) to be entered. From the touch screen control panel user can also selects and displays: the collimator state, the dose value and the chosen anatomical x-ray exposure technique, stored to facilitate and shorten the setting operations requested by user. is characterized with a dead man breaking system that with a comfortable handle both facilitates the push of the unit and its positioning. The breaking system is a dead man type and blocks the unit in any position, just releasing the handle. An automatic closedown system (after 30 minutes of inactivity) prevents the unit from remaining in ON mode for prolonged time, so avoiding also x-ray tube focus always on. The peculiar characteristic of CORSIX R 32 AKKU, is that the unit can operate either independently with batteries or by line network and any power socket can be used. In fact, the system operates with a capacitor bank to store energy. By touch screen you can select the two charging levels of the capacitor bank. The first level allows most radiographic to be carried out with a reduced charge of the capacitors. The second level is only selected when the examination requires full power of the apparatus. ITALRAY 3/8

4 TECHNICAL FEATURES RADIOLOGICAL CHARACTERISTICS Maximum power kv Inverter frequency 100 khz Max ripple < 3% at max power Exposure times ms kv range kv (steps 1kV) mas range 0,2-220 mas (28 steps) Max current 425 ma N of x-ray exposure with Up to 100 batteries Operating mode two-points radiological technique with selection of kv/mas. Anatomical techniques up to 240 ANATOMICAL TECHNIQUES to be stored X-ray tube type Rotating anode Anode speed 3000 rpm Focal spots 2: 0,6x0,6 mm (11 kw) and 1,3x1,3 mm (32 kw) Radiation field 36 cm (at 70 cm). 50 cm (at 100 cm) Max. voltage at monoblock 125 kv Max. current at monoblock 425 ma Monoblock heat capacity 375 kj (487 khu) Monoblock cont. heat dissipation 40 W (3200 HU/min) Min. inherent filtration 1,8 mm Al ITALRAY 4/8

5 OPERATING CHARACTERISTICS Operator interface Rear-lit touch screen display for all the operating parameters and messages for any possible anomalous conditions. Managed by Microcontroller. Radiography Exposure Control Remote control with double click and extension cable (not < than 4m) Radiography with free technique Technique with 2 points (kv, mas). Preset for DAP camera YES Preset for external bucky YES Automatic closedown The unit is fitted with an automatic closedown system after 30 minutes of not being used. This features prevent the unit from remaining on by mistake for long periods thereby avoiding jeopardising the x-ray tube operation (focuses always on) X-ray push button Manual with double click and extensible cable (standard) wireless (optional) Safety devices mamin and mamax safety device Maximum X-ray tube load safety device Maximum exposure time safety device Temperature and Monobloc Max kv, min kv, max I Capacitor faulty Starter anode faulty Microprocessor auto-test with display of diagnostic messages ITALRAY 5/8

6 MECHANICAL CHARACTERISTICS X-ray monoblock arm rotation ± 90 Width 662 mm Length 1354 mm Height 1450 mm Focus height max mm Handling Dead man brake Weight < 220 kg Cassette holder 35x43 cm ELECTRICAL DATA Main line power supply Battery power supply Voltage 230 Vac Frequency 50 Hz Max. Absorbed Current Cont. Oper. < 1A Intermitted operation = 5A Line impedance < 2,5 ENVIRONMENT CONDITIONS Operating temperature From 10 C to 40 C Operating humidity From 30% to 75% ITALRAY 6/8

7 SIZE AND DIMENSIONS CLASSIFICATIONS According to European Directive 93/42 CEE CORSIX R 32 Accu is a class II b device and it has been developed in compliance with the UNI EN ISO 9001:2000 and UNI EN ISO 13485:2004. INSTALLATION AND WARRANTY CORSIX R 32 Accu can be installed only by authorized technical personnel that has been appropriately trained by ITALRAY. Upon request, ITALRAY Installation Office can prepare system installation layouts (including eventual construction/electrical). ITALRAY guarantees its products for 1 (one) year from the delivery date. ITALRAY can offer to its customers a wide range of service plans that will perfectly fit all needs and preferences. ITALRAY 7/8

8 ITALRAY reserves the right to make modifications without any prior notice. Via Del Parlamento Europeo 9/D Scandicci Firenze tel. +39/055/ fax. +39/055/ website: info@italray.it ITALRAY 8/8