PRODUCT SPECIFICATION

Size: px

Start display at page:

Download "PRODUCT SPECIFICATION"

Rachel Harrison
5 years ago
Views:

1 PRODUCT SPECIFICATION MODEL:SQ070BOE50PW < > PRELIMINARY SPECIFICATION < > APPROVAL SPECIFICATION CUSTOMER APPROVED BY DATE: DESIGNED CHECKED APPROVED PREPAREDBY:. BAOAN'S 115 DISTRICT BAO SHIPPING CENTER BUILDING 3 BUILDING 5 FLOOR, SHENZHEN,GUANGDONG,CHINA TEL : FAX : /15 Model No.SQ070BOE50PW Ver:1.0

2 REVISION STATUS Version Revise Date Page Content Modified by V First Issued /15 Model No.SQ070BOE50PW Ver:1.0

3 TABLE OF CONTENTS NO. CONTENTS PAGE REVISION STATUS... 2 TABLE OF CONTENTS GENERAL DESCRIPTION PIN DESCRIPTION ELECTRICAL CHARACTERISTICS INPUT SIGNAL TIMING OPTICAL CHARACTERISTICS QUALITY ASSURANCE SYSTEM MECHANICAL SPECIFICATION /15 Model No.SQ070BOE50PW Ver:1.0

4 1. GENERAL DESCRIPTION 1.1 DESCRIPTION SQ070BOE50PW is a color active matrix thin film transistor(tft) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This module is composed of a TFT LCD panel, driver ICs, FPC and a Backlight unit. 1.2 FEATURES: No. Item Specification Unit 1 Panel Size 7 inch 2 Number of Pixels 800(H) 3(RGB) 480(V) pixels 3 Active Area (W) (H) mm 4 Pixel Pitch (W) (H) mm 5 Outline Dimension 165(W) 100(H) 3.5(T) mm 6 Pixel arrangement RGB vertical stripe - 7 Display Mode Normally White - 8 Viewing Direction 6 o clock - 9 Display Color 16.7M - 10 Luminance(cd/m2) 200(TYP.) nit 11 Contrast Ratio 400(TYP.) - 12 Surface Treatment Anti-Glare - 13 Interface 24bit-TTL - 14 Backlight White LED - 15 Drive IC Operation Temperature -20~70 17 Storage Temperature -30~80 18 Weight - g /15 Model No.SQ070BOE50PW Ver:1.0

5 2. PIN DESCRIPTION 深圳市思强光电有限公司 FPC Connector is used for the module electronics interface. The recommended model is FH12A-50S-0.5SH manufactured by Hirose. No. Symbol Function 1 LED+ Power for LED backlight (Anode) 2 LED+ Power for LED backlight (Anode) 3 LED- Power for LED backlight (Cathode) 4 LED- Power for LED backlight (Cathode) 5 GND Power ground 6 VCOM Common voltage 7 VDD Digital Power 8 MODE DE/SYNC mode select. Normally pull high H: DE mode. L: HSD/VSD mode 9 DE Data Input Enable 10 VS Vertical sync input. Negative polarity 11 HS Horizontal sync input. Negative polarity 12 B7 Blue data(msb) 13 B6 Blue data 14 B5 Blue data 15 B4 Blue data 16 B3 Blue data 17 B2 Blue data 18 B1 Blue data 19 B0 Blue data(lsb) 20 G7 Green data(msb) 21 G6 Green data 22 G5 Green data 23 G4 Green data 24 G3 Green data 25 G2 Green data 26 G1 Green data 27 G0 Green data(lsb) 28 R7 Red data(msb) 29 R6 Red data 30 R5 Red data 31 R4 Red data 32 R3 Red data 33 R2 Red data 34 R1 Red data 35 R0 Red data(lsb) 36 GND Power Ground 37 DCLK Dot data clock /15 Model No.SQ070BOE50PW Ver:1.0

38 GND Power Ground 39 L/R Left or Right Display Control 40 U/D Up / Down Display Control 41 VGH Positive Power for TFT 42 VGL Negative Power for TFT 43 AVDD Analog Power 44 RESET Global reset pin.

6 38 GND Power Ground 39 L/R Left or Right Display Control 40 U/D Up / Down Display Control 41 VGH Positive Power for TFT 42 VGL Negative Power for TFT 43 AVDD Analog Power 44 RESET Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF) 45 NC No connection 46 VCOM Common Voltage 47 DITHB Dithering setting:dithb= H 8bit resolution(default setting) DITHB= L 6bit resolution(last 2 bit of input data truncated) 48 GND Power Ground 49 NC No connection 50 NC No connection Note1: SHLR:left or right setting UPDN:up or down setting SHLR UPDN Data shifting VDD GND left to right,up to down(default) GND GND right to left,up to down VDD VDD left to right,down to up GND VDD right to left,down to up Note2: Definition of scanning direction. Refer to the figure as below: /15 Model No.SQ070BOE50PW Ver:1.0

7 3. ELECTRICAL CHARACTERISTICS 3.1 ABSOLUTE MAXIMUM RATINGS Item Symbol Min. Values Max. Digital Supply Voltage VDD V Analog Supply Voltage AVDD V Gate On Voltage VGH V Gate Off Voltage VGL V Gate On-Gate Off Voltage VGH-VGL V Unit Remark 3.2 TFT LCD MODULE Operating Conditions Item Symbol Values Min. Typ. Max. Unit Remark Digital Supply Voltage VDD V Analog Supply Voltage AVDD - (10.3) - V Gate On Voltage VGH - (18) - V Gate Off Voltage VGL - (-8) - V Common Voltage VCOM - (3.3) - V Note1 Logic Input Voltage VIH 0.7VDD - VDD V VIL GND - 0.3VDD V Note1: Please adjust VCOM to make the flicker level be minimum Current Consumption Item Symbol Condition Values Min. Typ. Max. Unit Remark Gate on Current IVGH VGH =18 V - (0.5) - ma Note1 Gate off Current IVGL VGL=-8 V - (4.21) - ma Note1 Digital Current IVDD VDD = 3.3 V - (6.85) - ma Note1 Analog Current IAVDD AVDD = 10.3 V - (27.26) - ma Note1 Total Power Consumption PC - TBD TBD mw Note1 Note1: Typ. specification:gray-level test Pattern Max. specification:black test Pattern /15 Model No.SQ070BOE50PW Ver:1.0

8 3.3POWER SIGNAL SEQUENCE To prevent the device damage from latch up, the power on/off sequence shown below must be followed. Power ON: VDD, VSS AVDD, VSSA V1 to V14 Power OFF: V1 to V14 AVDD, VSSA VDD, VSS 3.3.1Power on/off control /15 Model No.SQ070BOE50PW Ver:1.0

3.4BACKLIGHT UNIT Item Symbol Values Min. Typ. Max. Unit Remark LED Current Iled - 100 - ma 15LEDS Forward voltage VF 8.4 9.6 10.

9 3.4BACKLIGHT UNIT Item Symbol Values Min. Typ. Max. Unit Remark LED Current Iled ma 15LEDS Forward voltage VF V IF=100mA,15LEDS Reverse current IR μa VR=10V,1LED Power dissipation Pd 1050 mw 15LEDS Peak forward current IFP 100 ma 1LEDS Reverse Voltage VR 10 V 1LED 3.4.1Internal Circuit Diagram A 15LED 20*5=100mA K /15 Model No.SQ070BOE50PW Ver:1.0

10 4.INPUT SIGNAL TIMING 4.1TIMING CHARACTERISTICS OF INPUT SIGNALS Parameter Symbol Spec. Min. typ. Max. Unit HS setup time T hst ns HS hold time T hhd ns VS setup time T vst ns VS hold time T vhd ns Data setup time T dsu ns Data hold time T dhd ns DE setup time T esu ns DE hold time T ehd ns VDD Power On Slew rate T POR ms RSTB pulse width T Rst us CLKIN cycle time T cph ns CLKIN pulse duty T cwh % Output stable time T sst us 4.2DATA INPUT FORMAT Horizontal timing /15 Model No.SQ070BOE50PW Ver:1.0

11 Vertical timing Horizontal timing Parameter Symbol Spec. Min. typ. Max. Unit Horizontal Display Area thd 800 DCLK DCLK frequency fclk MHz One Horizontal Line th DCLK HS pulse width thpw 1-40 DCLK HS Back Porch (Blanking) thb 46 DCLK HS Front Porch thfp DCLK DE mode Blanking th-thd DCLK Vertical timing Parameter Symbol Spec. Min. typ. Max. Unit Vertical Display Area tvd 480 T H VS period time tv T H VS pulse width tvpw 3-20 T H VS Back Porch (Blanking) tvb 23 T H VS Front Porch tvfp T H DE mode Blanking tv-tvd T H /15 Model No.SQ070BOE50PW Ver:1.0

12 5. OPTICAL CHARACTERISTICS 深圳市思强光电有限公司 Ta = 25 ± 2 Item Symbol Condition Min. Typ. Max. Unit Note Response time Tr +Tf Point ms Note3 Contrast ratio CR Note4 Color Chromaticity White Red Green Blue X Y X Y θ= X Y X Y Note2 Note5 Note6 Luminance L cd/m2 Note6 Luminance uniformity YU % Up. θ Viewing Down. θ Point Angle Left. CR Note1 Right NTSC 52 % Note1:Definition of viewing angle range Fig. 6-1 Definition of viewing angle Note2:Definition of optical measurement system. The optical characteristics should be measured in dark room. After 30 minutes operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1 /Height: 500mm.) /15 Model No.SQ070BOE50PW Ver:1.0

13 Fig. 6-2 Optical measurement system setup Note3:Definition of Response time The response time is defined as the LCD optical switching time interval between White state and Black state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. Fig. 6-3 Definition of response time Note4:Definition of contrast ratio: Note5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note6: All input terminals LCD panel must be ground while measuring the center area of the panel. The LED driving condition is IL=100mA /15 Model No.SQ070BOE50PW Ver:1.0

14 6.QUALITY ASSURANCE SYSTEM 6.1 TEMPERATURE AND HUMIDITY Test Item Test Condition Remark HighTemperatureStorage Ta=80 ; 240hrs Low Temperature Storage Ta=-30 ; 240hrs High Temperature Operation Ta=70,240Hrs Low Temperature Operation Ta=-20 ; 240hrs High Temperature High Humidity Operation Thermal Shock Ta=60,90%RH, 240Hrs(no condensation) -30 (0.5h) ~ 80 (0.5h) / 100cycles IEC :2007 GB IEC :2007 GB IEC :2007 GB IEC :2007 GB IEC :2001 GB/T Start with cold temperature, End with high temperature, IEC :1984,GB Image Sticking 25 ; 4hrs Note1 Note1:Condition of image sticking test :25 ±2 Operation with test pattern sustained for 4hrs,then change to gray pattern immediately.after5 mins,themura must be disappeared completely 6.2 VIBRATION&SHOCK Test item Conditions Remark Packing Shock (non-operation) 980m/s2,6ms, ±x,y,z 3times for direction Frequency range:10 HZ~50HZ Packing Vibration Stroke:1.0mm,sweep:10 HZ ~50HZ (non-operation) x,y,z 2 hours for each direction 6.3ESD IEC :1987 GB/T IEC :1990 GB/T Test item Conditions Remark Electro Static 150pF,330Ω, 1 IEC :2001 Discharge Test Contact:±4KV,Air:±8KV GB/T (non-operation) 200pF,0Ω,±200V contact test 2 Note: Measure point : 1. LCD glass and metal bezel 2. IF connector pins /15 Model No.SQ070BOE50PW Ver:1.0

15 7. MECHANICAL SPECIFICATION 深圳市思强光电有限公司 ±0.2 OUTLINE ±0.2(BZ OPEN) A/A ±0.2 A 15LED 20*5=100mA K 深圳市思强光电有限公司单位比例核准产品型号 SQ070BOE50PW 审查产品描述提供者尺寸公差 ±0.20mm 图纸尺寸料号版本出图版本页数 ±0.2(BZ OPEN) A/A 100.0±0.2 OUTLINE /15 Model No.SQ070BOE50PW Ver:1.0

SPECIFICATION APPROVED BY: ( FOR CUSTOMER USE ONLY ) SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: 2016/07/25. EA TFT070-84ATP Page 1 of 19

SPECIFICATION APPROVED BY: ( FOR CUSTOMER USE ONLY ) SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: 2016/07/25. EA TFT070-84ATP Page 1 of 19 SPECIFICATION MODULE NO.: EA TFT070-84ATP APPROVED BY: ( FOR CUSTOMER USE ONLY ) PCB VERSION: DATA: SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: 2016/07/25 EA TFT070-84ATP Page 1 of 19 Content