Product Specification

Size: px

Start display at page:

Download "Product Specification"

Georgia Curtis
5 years ago
Views:

1 Spec. No Doc. version : 0 Total pages : 19 Date : Product Specification 1.5 COLOR TFT-LCD MODULE MODEL NAME: A015AN01 Ver.2 (UP015D02-1) < >Preliminary Specification Note: The content of this specification is subject to change AU Optronics All Rights Reserved, Do Not Copy.

2 Record of Revision Version Revise Date P a g e Content 1 30/Oct./2001 First draft.

3 Page : 1/ 19 Contents: A. Physical specification B. Electrical specifications 1. Pin P4 assignment a.tft-lcd panel driving P5 section b.backlight section 2.Absolute ratings 3. Electrical characteristics a. Typical operating conditions b. Current consumption c. Backlight driving conditions 4. AC Timing a. Timing conditions b. Timing diagram C. Optical specifications D. Reliability test items E. Packing form P3 P4 driving P5 maximum P5 P6 P6 P6 P6 P7 P7 P7 P8 P10 P11

4 Page : 2/ 19 Appendix: Fig.1 Outline dimension of TFT-LCD Fig.2 d lsampling clock ti Fig.3 i Horizontal display timing range (Normal scanning Fig.4 d )- (a) Horizontal ti Fig.4-(b) i Detail horizontal ti Fig.5 i Vertical shift clock ti Fig.6-(a) i Vertical timing (Normal scanning Fig.6-(b) d ) Vertical timing (Reverse scanning d ) P12 P13 P14 P15 P16 P17 P18 P19

5 A. Physical specifications Page : 3/ 19 NO. Item Specification Remark 1 Display resolution(dot) 280(W) 220(H) 2 Active area(mm) 29.54(W) 22.22(H) 3 Screen size(inch) 1.45(Diagonal) 4 Dot pitch(mm) (W) 0.101(H) 5 Color configuration R. G. B. delta 6 Overall dimension(mm) 39.55(W) 32.6(H) 4.0(D) Note 1 7 Weight(g) 10 Typ. Note 1: Refer to Fig. 1

6 B. Electrical specifications 1.Pin assignment a. TFT-LCD panel driving section Page : 4/ 19 Pin no Symbol I/O Description Remark 1 GND - Ground for logic circuit 2 V CC1 I Supply voltage of logic control circuit for scan driver 3 V GL I Negative power for scan driver 4 V GH I Positive power for scan driver 5 STVR I/O Vertical start pulse Note 1 6 STVL I/O Vertical start pulse Note 1 7 CKV I Shift clock input for scan driver 8 U/D I Up/Down scan control input Note 1,2 9 OEV I Output enable input for scan driver 10 VCOM I Common electrode driving signal 11 VCOM I Common electrode driving signal 12 L/R I Left/Right scan control input Note 1,2 13 Q1H I Analog signal rotate input 14 OEH I Output enable input for data driver 15 STHL I/O Start pulse for horizontal scan line Note 1 16 STHR I/O Start pulse for horizontal scan line Note 1 17 CPH3 I Sampling and shifting clock pulse for data driver 18 CPH2 I Sampling and shifting clock pulse for data driver 19 CPH1 I Sampling and shifting clock pulse for data driver 20 V CC2 I Supply voltage of logic control circuit for data driver 21 GND - Ground for logic circuit 22 VR I Alternated video signal input(red) 23 VG I Alternated video signal input(green) 24 VB I Alternated video signal input(blue) 25 AV DD I Supply voltage for analog circuit 26 AV SS - Ground for analog circuit Note 1: Selection of scanning mode

7 Mode Normal mode Reverse mode Setting of scan control input IN: Input; OUT: Output. IN/OUT state For start pulse U/D L/R STVR STVL STHR STHL Page : 5/ 19 Scanning direction L H OUT IN OUT IN From up to down, and from left to right. H L IN OUT IN OUT From down to up, and from right to left. Note 2 : Definition of scanning direction. Refer to figure as below: b. Backlight driving section (Refer to Fig.1) No. Symbol I/O Description Remark 1 HI I Power supply for backlight unit (High voltage) 2 GND - Ground 2. Absolute maximum ratings Item Symbol Condition Min. Max. Unit Remark Power voltage Input signal voltage Operating temperature Storage temperature Backlight voltage Note 1: VR, VG, VB. V CC GND= V V CC1, V CC2 AV DD AV SS = V V GH V GND=0 V GL V V GH V GL - 33 V V i -0.2 V CC +0.2 V Note 1 V I -0.3 V CC +0.3 V Note 2 VCOM V Topa 0 60 Ambient temperature Tstg Ambient temperature V L -0.3 V

8 Page : 6/ 19 Note 2: STHL, STHR, Q1H, OEH, L/R, CPH1~CPH3, STVR, STVL, OEV, CKV, U/D. 3. Electrical characteristics a. Typical operating conditions (GND=AVss=0V) Item Symbol Min. Typ. Max. Unit Remark Power supply V CC V V CC1 ; V CC2 AV DD V V GH V Video signal Amplitude (VR,VG,VB) VCOM V GL AC Vp-p AC component of V GL. Note 1 V GL H V High level of V GL. V ia AV SS AV DD -0.4 V Note 2 V iac V AC component V idc - AV DD /2 - V DC component V CAC Vp-p AC component, Note 3 V CDC V DC component,note 4 Input H Level V IH 0.8V CC - V CC V Signal Note 5 voltage L Level V IL 0-0.2V CC V Note 1: The same phase and amplitude with common electrode driving signal (VCOM). Note 2: Refer to Fig.4 - (a). Note 3: The brightness of LCD panel could be adjusted by the adjustment of the AC component of VCOM. Note 4: V CDC could be adjusted so as to minimize vertical straight line, flicker and maximum contrast on each module. Note 5: STHL, STHR, Q1H, OEH, L/R, CPH1~CPH3, STVR, STVL, OEV, CKV, U/D. Note 6: Be sure to apply GND, V CC and V GL (V GL must lower than 0 volt) to the LCD first, and then apply V GH. b. Current consumption (GND=AVss=0V) Parameter Symbol Condition Min. Typ. Max. Unit Remark Current for driver I GH V GH =15V ma I GL V GL _ H =-10V ma I CC V CC =5V ma V CC1 ; V CC2 I DD AV DD =5V ma c. Backlight driving conditions Parameter Symbol Min. Typ. Max. Unit Remark Backlight current 18 ma Backlight voltage V L (12.5) V LED Life Time L L Hr Note 1,2 Note 1 : Ta. = 25, I L = 18mA Note 2 : Brightness to be decreased to 50% of the initial value. 4. AC Timing

9 a. Timing conditions Page : 7/ 19 Parameter Symbol Min. Typ. Max. Unit. Remark Rising time t r ns Note 1 Falling time t f ns Note 1 High and low level pulse width t CPH ns CPH1~CPH3 CPH pulse duty t CWH % CPH1~CPH3 CPH pulse delay t C12 t C23 t C31 70 t CPH /3 t CPH /2 ns CPH1~CPH3 STH setup time t SUH ns STHR,STHL STH hold time t HDH ns STHR,STHL STH pulse width t STH t CPH STHR,STHL STH period t H s STHR,STHL OEH pulse width t OEH t CPH OEH Sample and hold disable time t DIS t CPH OEV pulse width t OEV t CPH OEV CKV pulse width t CKV t CPH CKV Clean enable time t DIS2-4 - t CPH Horizontal display start t SH t CPH /3 Horizontal display timing range t DH t CPH /3 STV setup time t SUV ns STVL,STVR STV hold time t HDV ns STVL,STVR STV pulse width t STV t H STVL,STVR Horizontal lines per field t V t H Vertical display start t SV t H Vertical display timing range t DV t H VCOM rising time t rcom s VCOM falling time t fcom s VCOM delay time t DCOM s RGB delay time t DRGB s Note 1: For all of the logic signals. b. Timing diagram Please refer to the attached drawing, from Fig.2 to Fig.6.

10 Signal(Relative value) C. Optical specification (Note 1,Note 2, Note 3 ) Page : 8/ 19 Item Symbol Condition Min. Typ. Max. Unit Remark Response time Rise Fall Tr Tf = ms ms Note 4 Contrast ratio CR At optimized viewing angle Note 5,6 Viewing angle Top Bottom Left Right CR deg Note 7 Brightness Y L = cd/m 2 Note 8 White chromaticity X = y = Note 1. Ambient temperature =25. And backlight current I L =18 ma Note 2. To be measured in the dark room. Note 3.To be measured on the center area of panel with a field angle of 1 by Topcon luminance meter BM-7, after 10 minutes operation. Note 4. Definition of response time: The output signals of photo detector are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. The response time is defined as the time interval between the 10% and 90% of amplitudes. Refer to figure as below. 100% 90% "White" "Black" "White" 10% 0% Tr Tf Note 5. Definition of contrast ratio: Contrast ratio is calculated with the following formula.

11 Page : 9/ 19 Photo detector output when LCD is at White state Contrast ratio (CR)= Photo detector output when LCD is at Black state Note 6. White Vi=V i50 1.5V Black Vi=V i50 2.0V Means that the analog input signal swings in phase with COM signal. Means that the analog input signal swings out of phase with COM signal. V i50 : The analog input voltage when transmission is 50% The 100% transmission is defined as the transmission of LCD panel when all the input terminals of module are electrically opened. Note 7. Definition of viewing angle: Refer to figure as below. Note 8. Measured at the center area of the panel when all the input terminals of LCD panel are electrically opened.

12 D. Reliability test items: Page : 10/ 19 No. Test items Conditions Remark 1 High temperature storage Ta= Hrs 2 Low temperature storage Ta= Hrs 3 High temperature operation Ta= Hrs 4 Low temperature operation Ta= 0 240Hrs 5 High temperature and high humidity Ta= % RH 240Hrs Operation 6 Heat shock -25 ~80 /50 cycle 2Hrs/cycle Non-operation 7 Electrostatic discharge 200V,200pF(0 ), once for each terminal Non-operation 8 Vibration 9 Mechanical shock 10 Vibration (with carton) 11 Drop (with carton) Note: Ta: Ambient temperature. Frequency range : 10~55Hz Stoke : 1.5mm Sweep : 10~55Hz~10Hz 2 hours for each direction of X,Y,Z (6 hours for total) 100G. 6ms, X, Y, Z 3 times for each direction Random vibration: 0.015G 2 /Hz from 5~200Hz 6dB/Octave from 200~500Hz Height: 60cm 1 corner, 3 edges, 6 surfaces Non-operation JIS C7021, A-10 condition A Non-operation JIS C7021, A-7 condition C IEC 68-34

13 E. Packing form Page : 11/ 19

14 Page : 12/ UL V AWG32 GND HI UL V AWG Fig.1 Outline dimension of TFT-LCD module

15 Page : 13/ 19 t t HDH SUH t STH t C31 t C12 t C23 t CWH t CPH 50% 50% t t r f 90% 90% 10% 10% STHL(R) CPH1 CPH2 CPH3

16 Page : 14/ 19 t DH tsh STHL(Input) STHR(Output) CPH1

17 Page : 15/ 19 White V CAC VCAC t H Blank White Black V iac 1H VGL_H VGL_AC ViA Black Blank VCDC ViDC (HSY) OEH STHL(R) OEV CKV Q1H VCOM V GL VR(GB)

18 Page : 16/ 19 10% t fcom 10% 90% 90% 1H t t DIS1 t STH OEH t CKV t DCOM 90% 50% t rcom 10% 90% 50% t DRGB 10% t OEV t DIS2 (HSY) OEH STHL(R) OEV CKV Q1H VCOM V GL V R(GB)

19 Page : 17/ 19 50% 50% t SUV t HDV t CKV STVR(L) CKV

20 Page : 18/ 19 Display on panel first line t SV Fig.6-(a) Vertical timing (From up to down) VR(GB) (HSY) (VSY) STVL Q1H VCOM(Odd field) VCOM(Even field)

21 Page : 19/ 19 Display on panel first line t SV Fig.6-(b) Vertical timing (From down to up) V R(GB) (HSY) (VSY) STVR Q1H VCOM(Odd field) VCOM(Even field)

Product Specification

Version 1 Total pages 20 Date 2003.04.07 Product Specification 7 color TFT-LCD module MODEL NAME: A070FW03 ( ) Preliminary Specification (.. ) Final Specification Note: The content of this specification