TSV911-TSV912-TSV914. Rail-to-rail input/output 8MHz operational amplifiers. Features. Applications. Description. Pin connections (top view)

Size: px

Start display at page:

Download "TSV911-TSV912-TSV914. Rail-to-rail input/output 8MHz operational amplifiers. Features. Applications. Description. Pin connections (top view)"

Marion Cunningham
5 years ago
Views:

1 TSV9TSV92TSV94 Railtorail input/output 8MHz operational amplifiers Features Railtorail input and output Wide bandwidth Low power consumption:.ma max. Unity gain stability High output current: 35mA Operating from 2.5V to 5.5V Low input bias current, pa typ ESD Internal protection 5kV Latchup immunity Output VDD Non Inverting Input Pin connections (top view) SOT SO8 (single) 5 4 VCC Inverting Input Applications Batterypowered applications Portable devices Signal conditioning Active filtering Medical instrumentation Automotive Description The TSV9/2/4 family of single, dual and quad operational amplifiers offers low voltage operation and railtorail input and output. This family features an excellent speed/power consumption ratio, offering an 8MHz gainbandwidth product while consuming only.ma max at 5V supply voltage. These opamps are unity gain stable for capacitive loads up to 200pF. They also feature an ultralow input bias current. These characteristics make the TSV9/2/4 family ideal for sensor interfaces, batterysupplied and portable applications, as well as active filtering. N.C. Inverting Input Non Inverting Input Non Inverting Input 3 + VDD 4 Output Inverting Input 2 Non Inverting Input _ VDD 4 5 N.C. MiniSO8, SO8 (dual) Output Inverting Input 2 _ 8 7 VCC Output 2 _ + SO4, TSSOP4 VCC 4 VDD Non Inverting Input Inverting Input Output N.C. VCC Output 6 Inverting Input 2 5 Non Inverting Input 2 4 Output 4 3 Inverting Input Non Inverting Input 4 Non Inverting Input 3 Inverting Input 3 Output 3 June 2007 Rev 2 /9. 9

2 Contents TSV9TSV92TSV94 Contents Absolute maximum ratings and operating conditions Electrical characteristics Package information SOT235 package mechanical data MiniSO8 package mechanical data SO8 package mechanical data TSSOP4 package mechanical data SO4 package mechanical data Ordering information Revision history /9

3 TSV9TSV92TSV94 Absolute maximum ratings and operating conditions Absolute maximum ratings and operating conditions Table. Absolute maximum ratings (AMR) Symbol Parameter Value Unit V CC Supply voltage () V id Differential input voltage (2) V in Input voltage (3) 6 V ±V CC V V DD 0.2 to V CC +0.2 V T stg Storage temperature 65 to +50 C R thja Thermal resistance junction to ambient (4) (5) SOT235 SO8 MiniSO8 SO4 TSSOP C/W R thjc Thermal resistance junction to case SOT235 SO8 MiniSO8 SO4 TSSOP C/W T j Maximum junction temperature 50 C HBM: human body model (6) MM: machine model (7) 5 kv 300 V ESD CDM: charged device model (8) SOT235, SO8, MiniSO8 TSSOP4 SO V Latchup immunity 200 ma. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the noninverting input terminal with respect to the inverting input terminal. 3. V CC V in must not exceed 6V. 4. Shortcircuits can cause excessive heating and destructive dissipation. 5. R th are typical values. 6. Human body model: 00pF discharged through a.5kω resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 7. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5Ω). Done for all couples of pin combinations with other pins floating. 8. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. 3/9

4 Absolute maximum ratings and operating conditions TSV9TSV92TSV94 Table 2. Operating conditions Symbol Parameter Value Unit V CC Supply voltage 2.5 to 5.5 V V icm Common mode input voltage range V DD 0. to V CC +0. V T oper Operating free air temperature range to +25 C 4/9

5 TSV9TSV92TSV94 Electrical characteristics 2 Electrical characteristics Table 3. Electrical characteristics at V CC = +2.5V with V DD = 0V, V icm = V CC /2, R L connected to V CC /2, full temperature range (unless otherwise specified) () Symbol Parameter Conditions Min. Typ. Max. Unit DC performance V io Offset voltage TSV9x TSV9xA T min < T op < T max T min < T op < T max DV io /DT Input offset voltage drift 2 μv/ C I io I ib CMR A vd V CC V OH V OL I out Input offset current Input bias current Common mode rejection ratio 20 log (ΔV ic /ΔV io ) Large signal voltage gain High level output voltage Low level output voltage I sink T min < T op < T max T min < T op < T max (2) 00 0 (2) 00 0V to 2.5V, V out =.25V db R L = 0kΩ, V out = 0.5V to 2V, 80 T min < T op < T max 75 R L =0kΩ R L =600Ω R L =0kΩ R L =600Ω V o = 2.5V, 8 T min < T amb < T max 6 V I o = 0V, 8 source T min < T amb < T max mv pa pa db I CC Supply current (per operator) No load, V out =V CC / ma AC performance GBP Gain bandwidth product R L =2kΩ, C L =00pF, f =00kHz, T=25 C 8 MHz F u Unity gain frequency R L =2kΩ, C L = 00pF, 7.2 MHz φm Phase margin R L =2kΩ, C L = 00pF, 45 Degrees G m Gain margin R L =2kΩ, C L = 00pF, 8 db SR Slew rate R L =2kΩ, C L =00pF, A v =, 4.5 V/μs e n Equivalent input noise voltage f= 0kHz, 2 THD+e n Total harmonic distortion G=, f=khz, R L =2kΩ, Bw= 22kHz, T=25 C, V icm =(V CC +)/2, 0.00 % V out =.V pp. All parameter limits at temperatures other than 25 C are guaranteed by correlation. 2. Guaranteed by design. mv mv ma nv Hz 5/9

6 Electrical characteristics TSV9TSV92TSV94 Table 4. Electrical characteristics at V CC = +3.3V with V DD = 0V, V icm = V CC /2, R L connected to V CC /2, full temperature range (unless otherwise specified) () Symbol Parameter Conditions Min. Typ. Max. Unit DC performance V io Offset voltage TSV9x TSV9xA T min < T op < T max T min < T op < T max DV io Input offset voltage drift 2 μv/ C I io I ib CMR A vd V CC V OH V OL I out Input offset current Input bias current Common mode rejection ratio 20 log (ΔV ic /ΔV io ) Large signal voltage gain High level output voltage Low level output voltage I sink T min < T op < T max T min < T op < T max (2) 00 0 (2) 00 0V to 3.3V, V out =.65V db R L =0kΩ, V out = 0.5V to 2.8V, T=25 C 80 T min < T op < T max 75 R L =0kΩ R L =600Ω R L =0kΩ R L =600Ω V o = 3.3V, 8 T min < T amb < T max 6 V I o = 0V, 8 source T min < T amb < T max mv pa pa db I CC Supply current (per operator) No load, V out =V CC / ma AC performance GBP Gain bandwidth product R L =2kΩ, C L = 00pF, f = 00kHz, 8 MHz F u Unity gain frequency R L = 2kΩ, C L =00pF, 7.2 MHz φm G m SR Phase margin Gain margin Slew rate R L =2kΩ, C L =00pF, f = 00kHz, R L =2kΩ, C L =00pF, f = 00kHz, R L =2kΩ, C L = 00pF, f = 00kHz, A v =, mv mv ma 45 Degrees 8 db 4.5 V/μs e n Equivalent input noise voltage f= 0kHz, 2 THD+e n Total harmonic distortion G=, f=khz, R L =2kΩ, BW= 22kHz, V icm =(V CC +)/2, V out =.9V pp, T=25 C. All parameter limits at temperatures other than 25 C are guaranteed by correlation. 2. Guaranteed by design. nv Hz % 6/9

7 TSV9TSV92TSV94 Electrical characteristics Table 5. Electrical characteristics at V CC = +5V with V DD = 0V, V icm = V CC /2, R L connected to V CC /2, full temperature range (unless otherwise specified) () Symbol Parameter Conditions Min. Typ. Max. Unit DC performance V io Offset voltage TSV9x TSV9xA T min < T op < T max T min < T op < T max DV io Input offset voltage drift 2 μv/ C I io I ib CMR SVR A vd V CC V OH V OL I out Input offset current Input bias current Common mode rejection ratio 20 log (ΔV ic /ΔV io ) Supply voltage rejection ratio 20 log (ΔV CC /ΔV io ) Large signal voltage gain High level output voltage Low level output voltage I sink T min < T op < T max T min < T op < T max (2) 00 0 (2) 00 0V to 5V, V out = 2.5V db V CC = 2.5 to 5V db R L =0kΩ, V out = 0.5V to 4.5V, 80 T min < T op < T max 75 R L =0kΩ R L =600Ω R L =0kΩ R L =600Ω V o = 5V, T=25 C 8 T min < T amb < T max 6 V I o = 0V, 8 source T min < T amb < T max mv pa pa db I CC Supply current (per operator) No load, V out = 2.5V ma AC performance GBP Gain bandwidth product R L =2kΩ, C L = 00pF, f = 00kHz, T=25 C 8 MHz F u Unity gain frequency R L = 2kΩ, C L =00pF, 7.5 MHz φm Phase margin R L = 2kΩ, C L =00pF, 45 Degrees G m Gain margin R L = 2kΩ, C L =00pF, 8 db SR Slew rate R L =2kΩ, C L = 00pF, A V =, 4.5 V/μs e n THD+e n Equivalent input noise voltage Total harmonic distortion f=khz, f=0khz, G=, f=khz, R L =2kΩ, Bw= 22kHz, T=25 C, V icm =(V CC +)/2, V out =3.6V pp %. All parameter limits at temperatures other than 25 C are guaranteed by correlation. 2. Guaranteed by design. mv mv ma nv Hz 7/9

8 Electrical characteristics TSV9TSV92TSV94 Figure. Input offset voltage distribution at Figure 2. Input offset voltage distribution at T= 25 C 20 Vcc=5V Vicm=2.5V Tamb=25 C 30 Quantity of parts Quantity of parts Input offset Voltage (mv) Input offset Voltage (mv) Figure 3. Supply current vs. input common mode voltage at V CC = 2.5V Figure 4. Supply current vs. input common mode voltage at V CC = 5V Figure 5. Output current vs. output voltage at V CC = 2.5V Figure 6. Output current vs. output voltage at V CC = 5V 8/9

9 TSV9TSV92TSV94 Electrical characteristics Figure 7. Voltage gain and phase vs frequency at V CC = 2.5V and V icm =0.5V Figure 8. Voltage gain and phase vs frequency at V CC = 5.5V and V icm =0.5V Gain (db) Vcc=2.5V, Vicm=0.5V Cl=00pF, Rl=2kOhms, Vrl=Vcc/2 Tamb=25 C Phase ( ) Gain (db) Phase Phase Phase ( ) Phase ( ) Phase ( ) Figure 9. Phase margin vs.capacitive load Figure 0. Phase margin vs.output current Phase Margin ( ) Vcc=5V, Rl=2kOhms Vrl=2.5V Tamb=25 C Phase Margin ( ) Vcc=5V, Cl=00pF Tamb=25 C Figure. Positive slew rate Figure 2. Negative slew rate Vin : from 0.5V to Vcc0.5V SR : calculated from 0% to 90% Negative Slew Rate (V/µs) Vin : from 0.5V to Vcc0.5V SR : calculated from 0% to 90% Supply Voltage (V) /9

10 Electrical characteristics TSV9TSV92TSV94 Figure 3. Distorsion + noise vs. frequency Figure 4. Distorsion + noise vs. output voltage Vcc=2.7V THD + N (%) E3 THD + N (%) f=khz Rl=2kOhms Gain= BW=22kHz Vicm=(Vcc+V)/2 E Output Voltage (V) Figure 5. Noise vs. frequency Figure 6. Phase margin vs. capacitive load and serial resistor Phase Margin ( ) Vcc=5V Vrl=2.5V Tamb=25 C 0/9

11 TSV9TSV92TSV94 Package information 3 Package information Note: In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK packages. These packages have a leadfree second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: All packages are Moisture Sensitivity Level as per Jedec JSTD020C, except SO4 which is Jedec level 3. /9

12 Package information TSV9TSV92TSV94 3. SOT235 package mechanical data Dimensions Ref. Millimeters Mils Min. Typ. Max. Min. Typ. Max. A A A b C D E E e e L /9

13 TSV9TSV92TSV94 Package information 3.2 MiniSO8 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A b c D E E e K L L /9

14 Package information TSV9TSV92TSV SO8 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A b c D H E e h L k 8 8 ccc /9

15 TSV9TSV92TSV94 Package information 3.4 TSSOP4 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A b c D E E e 0.65 BSC BSC K L A A2 A b e c K L E D E PIN IDENTIFICATION 5/9

16 Package information TSV9TSV92TSV SO4 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A a a b b C c 45 (typ.) D E e e F G L M S 8 (max.) 6/9

17 TSV9TSV92TSV94 Ordering information 4 Ordering information Table 6. Order codes () Part number Temperature range Package Packing Marking TSV9ID TSV9IDT TSV9AID TSV9AIDT TSV9ILT TSV9AILT TSV92IST TSV92AIST TSV92ID TSV92IDT TSV92AID TSV92AIDT TSV94IPT TSV94AIPT TSV94ID TSV94IDT TSV94AID TSV94AIDT TSV9IYD TSV9IYDT (2) TSV9AIYD TSV9AIYDT (2) TSV92IYD TSV92IYDT (2) TSV92AIYD TSV92AIYDT (2) C to 25 C SO8 SOT235 MiniSO8 SO8 TSSOP4 SO4 () SO8 Automotive grade level TSV94IYD TSV94IYDT (2) SO4 () TSV94AIYD Automotive grade level TSV94AIYDT (2) Tube o Tape & reel Tape & reel Tube or Tape & reel Tape & reel Tube or Tape & reel V9I V9AI K27 K25 V92I V92AI V94I V94AI V94I V94AI V9IY V9AY V92IY V92AY V94IY V94AY. All packages are Moisture Sensitivity Level as per Jedec JSTD020C, except SO4 which is Jedec level Qualified and characterized according to AEC Q00 and Q003 or equivalent, advanced screening according to AEC Q00 & Q 002 or equivalent. 7/9

18 Revision history TSV9TSV92TSV94 5 Revision history Date Revision Changes 28Aug2006 First release. 7Jun Modified ESD CDM parameter for SO4 package in Table : Absolute maximum ratings (AMR). Noise parameters updated in Section 2: Electrical characteristics. Added limits in temperature in Section 2: Electrical characteristics. Added automotive grade level description in Table 6: Order codes. Added footnote about SO4 package in Table 6: Order codes. Added Figure 6: Phase margin vs. capacitive load and serial resistor. 8/9

19 TSV9TSV92TSV94 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners STMicroelectronics All rights reserved STMicroelectronics group of companies Australia Belgium Brazil Canada China Czech Republic Finland France Germany Hong Kong India Israel Italy Japan Malaysia Malta Morocco Singapore Spain Sweden Switzerland United Kingdom United States of America 9/9

MC Low noise quad operational amplifier. Features. Description

MC Low noise quad operational amplifier. Features. Description MC3379 Low noise quad operational amplifier Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion:.2% Large output voltage swing: +14.3 V/-14.6