LIEBEL-FLARSHEIM DIRECT DIGITAL IMAGING SYSTEM UROLOGICAL TABLE TECHNICAL SPECIFICATIONS

Transcription

1 LIEBEL-FLARSHEIM DIRECT DIGITAL IMAGING SYSTEM UROLOGICAL TABLE TECHNICAL SPECIFICATIONS The LIEBEL-FLARSHEIM DDI TABLE is an advanced urological x-ray table designed for today's needs. It is designed to support a 750 lb. (340 Kg.) patient. It is electro/hydraulic and electro/mechanical in function, controlled by computer micro-processor electronics. Table Elevation Range: (From Table Top) Table Tilt Range: Low Position: High Position: Speed of Travel: Trendelenberg: Reverse Trendelenberg: Speed of Travel: 31.5" (800 mm) 50" (1270 mm) Up to 1" (26 mm) per second 20 Degrees 88 degrees Up to 5 degrees per second Table Top: Operator Convenience: Flat Panel Detector Adaptability: Longitudinal: Total Travel: Speed of Travel: Lateral: Total Travel: Speed of Travel: Table Top Frame and Length: Maximum Table Top Load: 10" (254 mm) to head end 10" (254 mm) to foot end 20" (508 mm) Up to 1-1/2" (38 mm) per second ± 6" (152 mm) 12" (305 mm) Up to 1-1/2" (38 mm) per second 43-1/2" (1105 mm) 750 lbs. (340 Kg.) Available in Right (reverse) or Left-hand (standard) Configurations Three user programmable Table/X-Ray Tube Position memories One service programmable Prep memory Light-weight carbon-fiber table top lifts for easy cleaning, includes pad All Tables include a mechanical lower limit stop to protect table. Moves synchronously or independently of x-ray tube arm Edge of intensifier to perineal end of table: 3" (76.2 mm) Longitudinal image window: 32" (812.8 mm) Sizes up to 14" (356 mm) diameter Image distance from table top: 1.5" (38.1 mm) X-Ray Tube Support Arm: Source to Image Distance: 45.3" (1151 mm) Power assisted x-ray Tube arm stores out of way for patient convenience Standard Accessories: 24" Table Extension with Pad (attaches at foot or head end) Table Rail mounted I.V. Stanchion Collapsible Latching UroDrain Frame Armboard One Pair of Universal Clamps One Pair of Leg Crutches Mallinckrodt, Liebel-Flarsheim Business - Service Department - Site and Installation Planning Revised: 9/13/2012 SVC1200a

2 LIEBEL-FLARSHEIM DIRECT DIGITAL IMAGING SYSTEM UROLOGICAL TABLE TECHNICAL SPECIFICATIONS (continued) Table Weight: (Table Only) Load Bearing Requirements: (Mounting Surface) Anchorage Requirements: (Table Only) Fixed Arm Models: Standard Mounting Method: Auxiliary Mounting Method: Anchoring System: 1925 lbs. (873 Kg.) 476 lbs. per square foot (2341 Kg. / square meter) As appropriate (Customer Supplied) 2500 lbs. (1134 Kg.) per anchor System must be appropriate for type of floor at installation site and must comply with all building codes and regulations for safe installation. Operating Non-Operating Environmental Requirements: (Table Only) Ambient Temperature: 40 F to 95 F -40 F to 140 F (4 C to 35 C) (-40 C to 60 C) Humidity (Non-Condensing): 20% to 90% 5% to 90% Altitude: 8000 Feet 8000 Feet (2438 Meters) (2438 Meters) Electrical Requirements: (Table Only) Supply 1 - Table Function: volts, 1Ø, 50/60 Hz Current - Approximately 25 amps at 240V, 60Hz Voltage Regulation: All Models: 220 volts, ± 10% Peak Current Draw: All Models: volts (Table Function) Heat Dissipation: (Table Only) Frequency Regulation: Max. Line Voltage Variation: BTU Output (5% Duty Cycle): All Models: ± 3 Hz ± 220 volts 208 volts: 1648 BTU per hour 240 volts: 1520 BTU per hour Minimum Clear Opening Requirements: For Transporting equipment from off-loading area thru corridors, up or down elevator to room for installation minimum clearances are as follows: Doors: 39" (991mm) wide x 6'-8" (2032mm) high; Elevators: 39" (991mm) wide x 6'-8" (2032mm) high x 7'-4" (2235mm) deep; Corridors: 6'-0" (1829mm) wide. Mallinckrodt, Liebel-Flarsheim Business - Service Department - Site and Installation Planning Revised: 9/13/2012 SVC1200b

3

4

5

6

7

8

9

10 LIEBEL-FLARSHEIM DIRECT DIGITAL IMAGING SYSTEM UROLOGICAL TABLE TECHNICAL SPECIFICATIONS REFERENCE SHEET LIEBEL-FLARSHEIM DDI UROLOGY TABLE SEDECAL HIGH FREQUENCY GENERATOR i5 NEXUS DIGITAL IMAGING SYSTEM INSTALLATION MANUAL REV. A TECHNICAL PUBLICATION PI-1040R2 i5 NEXUS SERVICE MANUAL PN: THALES CENTRAL PROCESSING UNIT TECHNICAL SPECIFICATIONS E SC OUTLINE DRAWING _041_A_PU TRIPP-LITE ISOLATION TRANSFORMER TECHNICAL SPECIFICATIONS IS1800HG Mallinckrodt, Liebel-Flarsheim Business - Service Department - Site and Installation Planning Revised: 9/13/2012 SVC1226