Clamp-on Testers. The 300, 310, 2343 and 2345 Series of Clamp-on Testers

Size: px

Start display at page:

Download "Clamp-on Testers. The 300, 310, 2343 and 2345 Series of Clamp-on Testers"

Samantha Cobb
5 years ago
Views:

models: 300 series of AC and AC/DC operated miniature

current measurement TrueRMS/mean value models in the 310

AC/DCoperated multifunction models in the 2343 series

measurement 300 31 2343 04 300 10 310 31 2345 03

1 Clampon Testers The 300, 310, 2343 and 2345 Series of Clampon Testers You can choose from a wide variety of models: 300 series of AC and AC/DC operated miniature models and batterydriven miniature models for leakage current measurement TrueRMS/mean value models in the 310 series for leakage current measurement AC and AC/DCoperated multifunction models in the 2343 series Lowcost, truerms/mean value models in the 2345 series for measurement Certification has been acquired by both the nead office and the Moroyama Factory Bulletin CLE

300 Series of Compact Clampon Testers Compact 300 10 300 20 27 Compact 20Hz to 1kHz DC A 27 Low cost,simple operation Bargraph for monitoring changes in current Clamp strength greatly improved by

2 300 Series of Compact Clampon Testers Compact Compact 20Hz to 1kHz DC A 27 Low cost,simple operation Bargraph for monitoring changes in current Clamp strength greatly improved by solid structure Approved for conformity to safety standards EN and EN (CAT III 300 V, pollution degree 2) Peak function for measuring wave heights of 10 ms or more Onetouch zeroadjuster function Thin jaws convenient for narrow places Approved for conformity to safety standards EN and EN (CAT III 300 V, pollution degree 2) DC current 20Hz~1kHz At 23 C+ 5 C, 80% RH *:+ (% rdg + dgt) = + (% readout + value of least significant digit) (30 A range) (300 A range, A) (300 A range, A) 20Hz~1kHz (30 A range) (300 A range, A) (300 A range, A) (30 A range) (300 A range, A) (300 A range, A) General Specifications for 300 Series (Digital display: counts) LCD (Bargraph display: 32 segments) Digital display: 2 times/second Bargraph display: 12 times/second LCD (Digital display: counts) 2 times/second (Digital display) switching Autorange 0 50 C, 80% RH or less (no condensation) % of range/ C or less 0.1% of range/ C or less (within the ranges of 0 18 C, C) (within the ranges of 0 18 C, C) Auto poweroff + 0.6% or less + 0.7% or less Approved for conformity to EN , EN Vrms or less 3.7 kv AC for one minute One CR2032 (coinshaped) 3 V battery Approx. 100 hours (when continuously used) Approx. 20 hours (when continuously used) 27 mm at maximum Approx. 53(W) 156(H) 25(D) excluding protrusions Approx. 43(W) 152(H) 25(D) excluding protrusions Approx. 130 g Approx. 110 g Instruction manual, battery, soft case 1

300 Series of Compact Clampon Testers Compact 300 30 300 31 30mA~300A 40 Compact 3mA~60A 40 Can measure a broad range of currents from leakage currents (at a resolution of 0.

3 300 Series of Compact Clampon Testers Compact mA~300A 40 Compact 3mA~60A 40 Can measure a broad range of currents from leakage currents (at a resolution of 0.01 ma) to load currents of up to 300 A. Maximum influence (on the current value of an adjacent cable) from an external magnetic field is 0.01%. Can measure leakage currents of 1 ma, which is useful for checking the insulation of lowvoltage circuits and electrical components. Can measure a broad range of currents from leakage currents (at a resolution of ma) to load currents up to 60 A. Typical influence (on the current value of an adjacent cable) from an external magnetic field is %. Durability of clamp: More than 50,000 opening/closing events Twice the torsional strength of Yokogawa M&C's earlier model clamps The clamp lever is lengthened by 30%, enabling smooth opening/closing of the clamp even for thick cables of 40mm in diameter. Approved for conformity to safety atandards EN and EN (CAT III 300V,pollution degree2) 23 C+ 5 C, 80% RH *:+ (% rdg + dgt) = + (% readout + value of least significant digit) /300mA, 3/30mA,30/60A (30/300mA) (0~200A) (200~300A) (0~20mA) (20~30mA) (0~50mA) (50~60A) General Specifications for 310 Series switching Mean Value (Digital display: counts) LCD (Bargraph display: 32 segments) 2 times/second (Digital display), 12 times/second (Bargraph display) Autorange 0 50 C, 80% RH or less (no condensation) 0.05% of range/ C or less (within the ranges of 018 C and 2850 C for measurement of 0200 A) 0.05% of range/ C or less (with n the ranges of 018 C and 2850 C for measurement of 050 A) 0.01% or less (on current value of adjacent cable) % typical*1 (on current value of adjacent cable) Within accuracy Approved for conformity to EN ,EN Vrms or less 3.7kV AC for one minute One CR2032 (Coinshaped) 3 V battery Approx. 120hours (when continuously used) Approx. 90 hours (when continuously used) Auto poweroff 40 mm at maximum Approx. 70(W) 176(H) 25(D) excluding protrusions Approx. 180 g Approx. 200 g Instruction manual, battery, soft case *1: This is determined from averaging the amount of influence occurring elsewhere in the jaw. 2

310 Series of Leakage Clampon Testers 310 30 310 31 40Hz to 1kHz AC leakage 30mA 300A RMS 40Hz to 1kHz AC leakage 30mA 300A AC V 40 40 Maximum value hold and moving average display functions Optional

4 310 Series of Leakage Clampon Testers Hz to 1kHz AC leakage 30mA 300A RMS 40Hz to 1kHz AC leakage 30mA 300A AC V Maximum value hold and moving average display functions Optional AC adapter allows longterm measurement Low cost type Filtering function for measuring currents of fundamental frequency Autohold function holds max./min./average/final values in 10 seconds of measured current data Approved for conformity to safety standards EN and EN (CAT III 600 V, pollution degree 2) Crest factor of * of measured frequency* Filter ON Filter OFF General Specifications for 310 Series switching Auto poweroff At 23 C+ 5 C, 80% RH *: + (% rdg + dgt) = + (% readout + value of least significant digit) /300mA,3/ 40 Hz 1 khz (0 100 A, Hz) (0 100 A, Hz) ( A, 50/60 Hz) ( A, 50/60 Hz) ( A, 50/60 Hz) ( A, 50/60 Hz) (0 100 A, Hz) (0 100 A, Hz) (0 100 A, 70 Hz 1 khz) (0 100 A, 70 Hz 1 khz) ( A, 50/60 Hz) ( A, 50/60 Hz) < 3 (0 100 A) < 2.5 ( A) < 1.5 ( A) ( Hz) mv DC (for each range) Add+ (2% + 1 mv) to accuracy of measured. 1MΩ or more (600 V range) LCD (Digital display: counts) (Bargraph display: 32 segments) Digital display: 2 times/second Bargraph display: 10 times/second Autorange/Manualrange 0 50 C, 80% RH or less (no condensation) % of range/ C or less(within the ranges of 0 18 C, C ; at A measurement) 0.005% or less (against current value of adjacent electric cable) Within accuracy (At center of sensor; no rating for 100 A or more) Approved for conformity to EN ,EN Vrms or less 5.55 kv AC for one minute Two R 03 (AAA) 1.5 V batteries, or AC adapter (option, for only) Approx. 70 hours(when alkaline batteries are used) Approx. 150 hours (when alkaline batteries are used) 40 mm at maximum Approx. 76(W) 204(H) 31(D) excluding protrusions Approx. 350 g Instruction manual, batteries, hard carrying case, recorder plug (310 30), test lead (310 31) 3

2343 Series of Clampon Testers 2343 01 2343 02 40Hz to 500Hz 300/1000 A 40Hz to 1kHz ACV/DCV 53 40 to 500Hz 401000 A ACV/DCV RMS 53 Resistance measurement and continuity check functions Low power

5 2343 Series of Clampon Testers Hz to 500Hz 300/1000 A 40Hz to 1kHz ACV/DCV to 500Hz A ACV/DCV RMS 53 Resistance measurement and continuity check functions Low power design and auto poweroff for longer battery life Approved for conformity to safety standards BS EN , BS EN , BS EN (CAT II 600 V, pollution degree 2) Resistance, temperature, frequency measurement and continuity check functions Maximum value hold and moving average display functions Conforms to safety standards IEC , IEC , IEC (CAT II 600 V, pollution degree 2) Crest factor Resistance of measured frequency* of measured temperature General Specifications for 2343 Series switching Auto poweroff LCD At 23 C+ 5 C, 80% RH *: + (% rdg + dgt) = + (% readout + value of least significant digit) /1000 A 40/400/1000 A Hz Hz < 2.3 3/30/300/600 V 40/400/600 V 30/300/600 V 40/400/600 V 300Ω/3kΩ 400Ω/4kΩ ( Hz) C (0 70 C) C (30 0 C, C) mv DC (40/400 A range) mv DC (1000 A range) + (1% mv) 1MΩ or more (Digital display: counts) (Bargraph display: 32 segments) (Digital display: 4000 counts) (Bargraph display: 40 segments) Digital display: 2 times/second Bargraph display: 12 times/second Digital display: 2.3 times/second Bargraph display: 23 times/second Autorange/Manualrange 0 50 C, 80% RH or less (no condensation) 0.1/ C or less(within the ranges of 0 18 C, C) Approved for conformity to BS EN , BS EN , BS EN Conforms to IEC , IEC , IEC Vrms or less 3.7 kv AC for one minute Two R 6P (AA) 1.5 V batteries One 6F22 (S006P) 9 V battery Approx hours(when alkaline batteries are used) Approx. 170 hours(when alkaline battery is used) 53 mm at maximum, or mm busbar Approx. 96(W) 272(H) 43(D) Approx. 430 g Instruction manual, batteries, hard carrying case, test lead LCD 4

2343 Series of Clampon Testers 2343 03 2343 04 40Hz to 500Hz 40 1000 A ACV/DCV 53 DC A 40Hz to 500Hz 400/1000 A RMS ACV/DCV 55 Resistance, temperature, frequency measurement and continuity check

6 2343 Series of Clampon Testers Hz to 500Hz A ACV/DCV 53 DC A 40Hz to 500Hz 400/1000 A RMS ACV/DCV 55 Resistance, temperature, frequency measurement and continuity check functions Maximum value hold and moving average display functions Conforms to safety standards IEC , IEC , IEC (CAT II 600 V, pollution degree 2) Peak function that can measure wave heights of currents (5 ms or more) upon measurement of DC current Resistance, temperature, frequency measurement and continuity check functions Maximum value hold and moving average display functions Approved for conformity to safety standards BS EN , BS EN , BS EN (CAT II 600 V, pollution degree 2) DC current Resistance of measured frequency* of measured temperature At 23 C+ 5 C, 80% RH *: + (% rdg + dgt) = + (% readout + value of least significant digit) /1000 A /400/1000 A 400/1000 A Hz Hz /400/600 V 40/400/600 V 400Ω/4kΩ ( Hz) C(0~70 C) C(30~0 C,70~150 C) mv DC (40/400 A range) mv DC (40/400 A range) mv DC (1000 A range) mv DC (1000 A range) + (2% mv) + (1.3% + 2 mv) 1MΩ or more General Specifications for 2343 Series LCD(Digital display: 4000 counts) (Bargraph display: 40 segments) Digital display: 2.3 times/second Bargraph display: 23 times/second switching Autorange/Manualrange 0 50 C, 80% RH or less (no condensation) 0.1/ C or less (Within the ranges of 0 18 C, C) Conforms to IEC , IEC , IEC % or less Approved for conformity to BS EN , BS EN , BS EN Vrms or less 3.7 kv AC for one minute One 6F22 (S006P) 9 V battery Approx. 210 hours(when alkaline battery is used) Approx. 65 hours (when alkaline battery is used) Auto poweroff 53 mm at maximum or mm busbar 55 mm at maximum or mm busbar Approx. 96(W) 272(H) 43(D) Approx. 96(W) 261(H) 43(D) Approx. 430 g Approx. 450 g Instruction manual, battery, hard carrying case, test lead 5

2345 Series of Clampon Testers 2345 01 2345 03 40 to 500Hz AC V Waveform monitor 33 20Hz to 20kHz RMS Waveform monitor 33 Resistance measurement and continuity check functions Low power design and

7 2345 Series of Clampon Testers to 500Hz AC V Waveform monitor 33 20Hz to 20kHz RMS Waveform monitor 33 Resistance measurement and continuity check functions Low power design and auto poweroff for longer battery life Conforms to safety standards IEC , IEC , IEC (CAT II 600 V, pollution degree 2) Excellent frequency characteristics (20Hz 20kHz) Builtin 50/60 Hz filter function Approved for conformity to safety standards BS EN , BS EN (CAT III 300 V, pollution degree 2) Resistance Waveform monitor At 23 C+ 5 C, 80% RH Hz 20 Hz 20 khz (50/60 Hz range, Hz) (WIDE range, 20 Hz 2 khz) (WIDE range, 2 10 khz) (WIDE range, khz) 300/600 V 300Ω/3kΩ mvrms (5 mv/a) + 5% (50/60 Hz) + 10% ( Hz except ) *: + (% rdg + dgt) = + (% readout + value of least significant digit) mvrms (5 mv/a) + (1.0% + 1 mv) (20 Hz 2 khz) + (3.0% + 1 mv) (2 10 khz) + (6.0% + 1 mv) (10 20 khz) 100 kω or more, 100 pf or less 1 MΩ or more, 300 pf or less mv DC (30/300 A range) + (1.0% mv) (20 Hz 2 khz) + (2.0% mv) (2 10 khz) + (5.0% mv) (10 20 khz) 1MΩ or more General Specifications for 2345 Series switching Auto poweroff LCD (Digital display: counts; Bargraph display: 32 segments) Digital display: 2 times/second Bargraph display: 12 times/second Autorange Autorange/Manualrange 0 50 C, 80% RH or less (no condensation) 0.1/ C or less(within the ranges of 0 18 C, C) 1 A or less at 400 A/m 0.2 A or less at 400 A/m + 1% or less Conforms to IEC , IEC , IEC Approved for conformity to BS EN , BS EN Vrms or less 3.7 kv AC for one minute Two R 03 (AAA) 1.5 V batteries Approx. 700 hours(when alkaline batteries are used) Approx. 100 hours (when alkaline batteries are used) 33 mm at maximum Approx. 73(W) 190(H) 34(D) Approx. 250 g Approx. 280 g Instruction manual, batteries, hard carrying case, test lead ( ) 6

8 Selection Guide For AC Current Other measurement functions Resolution Continuity check Frequency Temperature Waveform monitor mm 53mm 33mm /1000A 40/400/1000A 0.01A 0.1A 0.01A 0.01A 40 ~ 500Hz 40 ~ 500Hz 20 ~ 20kHz For AC/DC Currents DC current Other measurement functions Resolution Resolution Continuity check Frequency Temperature mm 0.01A 0.01A 20Hz 1kHz mm /1000A 0.1A 400/1000A 0.1A 40 ~ 500Hz For Leakage Current Other measurement functions Resolution Continuity check Frequency Temperature mm 30/300mA, 3/30mA,30/60A 0.01mA 0.001mA mm 30/300mA,3/ 0.01mA 40Hz ~ 1kHz Optional Item B9646GN AC adapter Thermistor type temperature probe Cable for connecting recorder Cable for connecting monitor Specification 100V AC, 120V AC, 220V AC, Temperature range:50 to +150 C Cable length: approx. 2.5 m Cable length: approx. 2.5 m Applicable model /03/ /03/04, /03 Supplementary Products Item RB 055 RB 056 Carrying case RB 057 B9646HG RB 036 RB 012 plug JC 017 Test lead RD 031 Specification Hard type Soft type Soft type Hard type Soft type Hard type (Two pcs/unit) (A pair of red and black leads) Applicable model 310 Series / / Series , 2343 Series, World Wide Web site at NOTICE Before using the product, read the instruction manual carefully to ensure proper and safe operation. YOKOGAWA M&C CORPORATION International Sales Dept. KojimachiTokyu Bldg. 3F 66 Kojimachi, Chiyodaku, Tokyo, Japan Phone: Facsimile: Represented by: YOKOGAWA CORPORATION OF AMERICA 2 Dart Road, Newnan, GA U.S.A. Phone: Facsimile: YOKOGAWA EUROPE B. V. Vanadiumweg 11, Amersfoort, 3812PX THE NETHERLANDS Phone: Facsimile: YOKOGAWA AMERICA DO SUL S.A. Avenida Jurua, 149 Alphaville, Barueri/SP, BRAZIL Phone: Facsimile: YOKOGAWA ENGINEERING ASIA PTE. LTD. 5 Bedok South Rd, SINGAPORE Phone: Facsimile: YOKOGAWA AUSTRALIA PTY. LTD. Court D1, 2527 Paul Street North, North Ryde, NSW 2113, AUSTRALIA Phone: Facsimile: YOKOGAWA BLUE STAR LTD. 40/4 Lavelle Road, Bangalore, INDIA Phone: Facsimile: LTD. YOKOGAWA ELECTRIC Hotel International No. 2, Room 1047, Krasnopresnenskaja Nab. 12, Moscow, RUSSIAN FEDERATION Phone: Facsimile: YOKOGAWA MEASURING INSTRUMENTS KOREA CORPORATION City Air Tevminel Bldg.,4059, #1596, Samsungdong, Kangnamku, Seoul, KOREA Phone: to 0664 Facsimile: MCKEL6 Subject to change without notice. [Ed: 04/b] Printed in Japan: Apr. 2000(B)/5,000(YG) All Rights Reserved. Copyright 2000, Yokogawa M&C Corporation.

Clamp-on Testers. CL Series and of Clamp-on Testers. Our CL Series offers wide range of current measurement

Clamp-on Testers. CL Series and of Clamp-on Testers. Our CL Series offers wide range of current measurement Clampon Testers CL Series and 30031 of Clampon Testers Our CL Series offers wide range of current measurement AC Current Measurement CL120/130/135/150/155 AC/DC Current Measurement CL220/235/250/255 Leakage