USER'S MANUAL OEX-400S STEREO

Transcription

1 PHANTOM (CH) OFF ON 5 +5 OW OW OW OW OW MIC INE MIC INE MIC INE MIC INE (MP) INE OW NOISE PEAMP MIC/INE OW NOISE PEAMP MIC/INE OW NOISE PEAMP BA OW NOISE PEAMP MIC/INE MIC/INE 5/6 (MONO) EV+CHOUS EV+CHOUS EV+DEAY EV+DEAY EV+DEAY EV+DEAY FX ETUNS FX SEND Bit digital effects FX ET WAM HA B OOM VOCA VOCA VOCA STEEO+DEAY PATE STEEO+DEAY PESETS PEAK MUTE IN OUT CD/TAPE B HA WAM OOM POWE OUTPUT MASTE PHONES (MIN. OAD Ohms) SPK.OUT OEXS USE'S MANUA STEEO FUANGE COMPACT POTABE SOUND SYSTEM WITH BITS DIGITA EFFECTS MP PAYE MP USB EP A : OEXs SEIKAKU TECHNICA GOUP IMITED NO., ane 7, Sec., Han Shi West oad, Taichung 5, Taiwan Tel: info@altoproaudio.com Fax: All rights reserved to ATO. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. Copyright c 9 Seikaku Group Version. DEC. English NF7.

2 9. WAANTY. WAANTY EGISTATION CAD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty egistration Card within days of the Purchase Date. All the information presented in this Warranty egistration Card gives the manufacturer a better understanding of the sales status, so as to provide a more effective and efficient aftersales warranty service. Please fill out all the information carefully and genuinely, miswriting or absence of this card will void your warranty service.. ETUN NOTICE. In case of return for any warranty service, please make sure that the product is well packed in its original shipping carton, and it can protect your unit from any other extra damage.. Please provide a copy of your sales receipt or other proof of purchase with the returned machine, and give detail information about your return address and contact telephone number.. A brief description of the defect will be appreciated.. Please prepay all the costs involved in the return shipping, handling and insurance.. TEMS AND CONDITIONS. TO warrants that this product will be free from any defects in materials and/or workmanship for a period of year from the purchase date if you have completed the Warranty egistration Card in time.. The warranty service is only available to the original consumer, who purchased this product directly from the retail dealer, and it can not be transferred.. During the warranty service, TO may repair or replace this product at its own option at no charge to you for parts or for labor in accordance with the right side of this limited warranty.. This warranty does not apply to the damages to this product that occurred as the following conditions: Instead of operating in accordance with the user's manual thoroughly, any abuse or misuse of this product. Normal tear and wear. The product has been altered or modified in any way. Damage which may have been caused either directly or indirectly by another product / force / etc. Abnormal service or repairing by anyone other than the qualified personnel or technician. And in such cases, all the expenses will be charged to the buyer..5 In no event shall TO be liable for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you..6 This warranty gives you the specific rights, and these rights are compatible with the state laws, you may also have other statutory rights that may vary from state to state.

3 . TECHNICA SPECIFICATION IMPOTANT SAFETY INSTUCTION FAT analysis MP DECODE Electric Specification Power Section (SPK.OUT) Distortion Frequency esponse SN (ine IN) Output level Power continuous KHz,THD % Power EIAJ KHz,THD % Thermal protection Short protection Voltage protection Speaker Section Passive System Type Continuous Power Peak Power Max SP at M Frequency esponse Impedance Crossover Frequency Protection Coaxial Type ow Frequency Driver High Frequency Driver Coverage HxV Connectors Statis Power Consumption No Output powerstate at V Dielectric Strength Between ive+negative Earth Physical Dimension (W D H) Net Weight Cross Weight Supports FAT 6 and FAT, Supports VFAT (long file name), Supports multipartion up to Supports sample rates KHz, KHz,.5KHz,.5KHz,.KHz, KHz, KHz, and KHz. Supports bit rate to kbps and VB (Variable Bi ate) except free format Frequency esponse Hz~KHz Output level db S/N atio > 9 db Distortion (at KHz) <.5% <.% (at W & KHz) <.5% (at W & KHz) Hz to khz, +/dbu (at W) dbu.5dbu +/dbu ( ed ight & COMP.Start) XW@ XW@ X5W@ XW@ overtemperature power limiting thermal shutdown Temperature controlled V DC fan output shortcircuit protection overload output protection over voltage protection DC offset shutdown way Coax vented box 5W AES standard (each speaker) W Peak (each speaker) 7.5dB SP calculated 65HzKHz at db nominal.khz/db/oct Electronic on the Driver Woofer / Voice Coil Neodymium Driver / Voice Coil 7 Hx7 V Spherical hom Power Input with mono Jack W Between ive+negative IN/OUT Terminal(Positive+Negative) Insulation esistance Between ive+negative M Earth(A Voltage of 5VDC) Between ive+negative M IN/OUT Terminal(Positive+Negative) (A Voltage of 5VDC) Power supply Main voltage 5VAC at Test,Frequency 5/6Hz,eakage Current:5mA for minute VAC at Test,Frequency 5/6Hz,eakage Current:5mA for minute VAC~6Hz VAC~5Hz ~V: TA 5V ~V: T5A 5V 9mm*mm*6mm (.7 x7. x. ) 9.6kg 5.kg CAUTION ISK OF EECTIC SHOCK DO NOT OPEN TO EDUCE THE ISK OF EECTIC SHOCK PEASE DO NOT EMOVE THE COVE O THE BACK E OF TS UIPMENT. THEE AE NO PATS NEEDED BY USE INSIDE THE UIPMENT. FO SEVICE, PEASE CONTACT QUAIFIED SEVICE CENTES. This symbol, wherever used, alerts you to the presence of uninsulated and dangerous voltages within the product enclosure. These are voltages that may be sufficient to constitute the risk of electric shock or death. This symbol, wherever used, alerts you to important operating and maintenance instructions. Please read. Protective Ground Terminal AC mains (Alternating Current) Hazardous ive Terminal ON: Denotes the product is turned on. OFF: Denotes the product is turned off. CAUTION Describes precautions that should be observed to prevent damage to the product.. ead this Manual carefully before operation.. Keep this Manual in a safe place.. Be aware of all warnings reported with this symbol.. Keep this Equipment away from water and moisture. 5. Clean it only with dry cloth. Do not use solvent or other chemicals. 6. Do not damp or cover any cooling opening. Install the equipment only in accordance with the Manufacturer's instructions. 7. Power Cords are designed for your safety. Do not remove Ground connections! If the plug does not fit your AC outlet, seek advice from a qualified electrician. Protect the power cord and plug from any physical stress to avoid risk of electric shock. Do not place heavy objects on the power cord. This could cause electric shock or fire.. Unplug this equipment when unused for long periods of time or during a storm. 9. efer all service to qualified service personnel only.donotperformanyservicingotherthan those instructions contained within the User's Manual.. To prevent fire and damage to the product, use only the recommended fuse type as indicated in this manual. Do not shortcircuit the fuse holder. Before replacing the fuse, make sure that the product is OFF and disconnected from the AC outlet. WANING To reduce the risk of electric shock and fire, do not expose this equipment to moisture or rain... Dispose of this product should notbeplacedinmunicipalwaste and should be separate collection. Move this Equipment only with a cart, stand, tripod, or bracket, specified by the manufacturer, or soldwiththe Equipment. When a cart is used, use caution when moving the cart / equipment combination to avoid possible injury from tipover. Permanent hearing loss may be caused by exposure to \ extremely high noise levels. The US. Government's Occupational Safety and Health Administration (OSHA) has specified the permissible exposure to noise level. These are shown in the following chart: HOUS X DAY SP EXAMPE ,5 5,5,5 or less 5 Small gig train Subway train High level desktop monitors Classic music concert ock concert According to OSHA, an exposure to high SP in excess of these limits may result in the loss of heat. To avoid the potential damage of heat, it is recommended that Personnel exposed to equipment capable of generating high SP use hearing protection while such equipment is under operation. The apparatus shall be connected to a mains socket outlet with a protective earthing connection. The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 9

4 IN TS MANUA. INTODUCTION.... FEATUES.... QUICK STAT.... CONTO EEMENTS INSTAATION & CONNECTION BOCK DIAGAM PESET IST...7. TECHNICA SPECIFICATIONS WAANTY.... INTODUCTION Congratulations! Now you are the owner of the OEXS. The OEXS is a plastic reinforced trolley that includes a versatile mixer with effects, & full range speaker cabinets. Besides, this package also includes some essential accessories such as power cord, signal cables, speaker cables. In order to ensure high versatility and excellent audio performances, the OEXS adopts optimal crossover frequency and advanced power amplifier technologies. The & speaker cabinets are tightly hooked on the trolley. When you operate the OEXS, first of all take care of the setting of the & cabinets. It is the development of ATO's experience and knowledge in speakers field, in order to faithfully reproduce sound for each kind of applications. Inlaid in OEXS panel there's a compact extractable channel mixer, which adopts bit A/D&D/A converters and bit effects with accurate algorithms (6 presets). It also provides MIC inputs with ultra low noise microphone preamplifiers, natural band ; AUX send/return and TK in/out and optional MP and 9 band and so on. In a word, it is ideally suited for live sound applications, small venues applications, live recording and many other musical purposes. In order to get the best performances from your OEXS, we recommend you to thoroughly read this owner's manual before installation and operation.. TECHNICA SPECIFICATION Mono channels(chch) Microphone Input Frequency esponse: Distortion( THD&N) Sensitivity Maximum Voltage Gain SN( Signal to Noise ate ) Phantom power ine Input Frequency esponse: Distortion( THD&N) Sensitivity Maximum Voltage Gain Stereo channels(ch5/6) ine Input SN( Signal to Noise ate ) Frequency esponse: Distortion( THD&N) Sensitivity Maximum Voltage Gain Impedance Microphone Input All Other Input Tape Out All Other Outputs Equalization High( Mono channels) High(Stereo channels) ow(mono channels) ow(stereo channels) Section A/D And D/A Converters esolution Type of effects Presets Controls Crosstalk Adjacent Input Input to Output Main Mix Section TACK,Aux,Phones Output Master Output(to AMP) Main (Option) Noise (Bus noise) Compressor Threshold atio Mp Section(Option) USB HOST Electronically Balanced, discrete Input Configuration(SW to MIC) Hz to khz, +/dbu.% At khz dbu 5 db CH MIC INPUT HEAD PHONE OUT 5 db CH MIC INPUT TAPE OUT 5 db CH MIC INPUT FX SEND dbu +5V~+9V with switch control (Mic Pin/Pin And Pin) Electronically Balanced(SW to INE) Hz to khz, +/dbu.% At khz dbu db CH INE INPUT TAPE OUT Electronically Balanced(SW to INE) dbu Hz to khz, +/dbu.% At khz dbu db FX ETUN TAPE OUT db CA TAPE INPUT TAPE OUT.9k Ohms k Ohms or Greater k Ohms Ohms 5 khz 5 khz 5 Hz 5 Hz Bit Bit WAM HA, B HA, WAM OOM, B OOM, VOCA, VOCA, VOCA, PATE, STEEO DEAY, STEEO DEAY, EV+DEAY, EV+DEAY, EV+DEAY,EV+DEAY,EV+CHOUS,EV+ CHOUS 6 6Posistion PESET Selector CIP ED MUTE SWITCH with ED Indicator 75 KHz (CH6) 7 KHz (STEEO /,CH,:panned hard left or right) Output level dbu Unbalanced, /" Jacks Max out +dbu Unbalanced, /" Jacks Output level 5dBu (CN,CN) 9 bands(6,5,5,5,k,k,k,k,6khz) Hz~KHz (channel & MAIN level at db, other at minimum, mute) 7dBu 6: "Builds in the USB FU speed(mbps)host control function" Supports the USB mass storage class

5 7. PESET IST NO. Preset Description Parameter WAM HA B HA WAM OOM B OOM VOCA VOCA VOCA Simulate a small acoustic space of the sound. Simulate a large acoustic space of the sound. Simulate a small acoustic space of the sound. Simulate a studio room with many early reflections. Simulate a room with without delay time. Simulate a room with small delay time. Simulate a small space with slight decay time. ev. Decay time: 6ms Predelay: 5ms ev. decay time: 9ms Predelay: ms ev. decay time: ms Predelay: 5ms ev. Decay time: ms Predelay: ms ev. decay time: 5ms ev. decay time:ms Predelay: 5ms ev. decay time:ms Predelay: ms PATE STEEO DEAY STEEO DEAY EV+DEAY EV+DEAY EV+DEAY EV+DEAY EV+CHOUS EV+CHOUS Simulate the transducers sound like classic bright vocal plate. ecreate the input sound on the stereo output with different time. ecreate the input sound on the stereo output with different time. Delay with room effect. Delay with room effect. Delay with room effect. Delay with room effect. Simulate the sound effect achieved by rotating horn speakers and a bass cylinder. Simulate the sound effect achieved by rotating horn speakers and a bass cylinder. Predelay: ms ev. decay time: 9ms Period: 5ms Period: ms Delay period: 6ms ev. decay time: 9ms Delay period: ms ev. decay time: ms Delay period: 75ms ev. decay time: ms Delay period: 77ms ev. decay time: 5ms Chorus rate:.67hz ev. decay time: 9ms Chorus rate:.hz ev. decay time: 5ms. FEATUES ightweight, uggage style, Trolley appearance portable system Two " speakers + channel powered mixer in super combination Stereo fullrange speaker system X MIC input with ultra low noise microphone preamplifiers +V Phantom power stereo INE input & stereo CD/TAPE input Warm, natural band, (BA) for each channel Precision level control bit effects with powerful algorithms (6 presets) MP player & 9Band for option speaker cables &microphone and cables Amp. System with 5W ohm in EIAJ; W *@ohm in MS. QUICK STAT This is the fastest way to get something out from your OEXS, if you have a keyboard and a microphone. a. Please check the AC voltage available in your country before connecting your OEXS to the AC socket. b. Be sure that the main power switch is turned off before connecting the powered mixer to the AC socket. Also, you should make sure that all input and output controls are turned down. This will avoid damages to your speakers as well as excessive noise. c. Please connect a passive speaker to your OEXS speaker connector or /'' jack(#5). Otherwise, you can connect a pair of active speakers directly to your OEXS Main Out eft & ight /'' jacks(#). d. Complete these connections as illustrated. e. Before disconnecting the OEXS always turnoff the Power switch. f. Do not use solvents to clean your OEXS. A dry and clean cloth will be OK. Here you are. It is your first GIG with your OEXS. 7

6 SPOTIGHT GIG HOOKUP DIAGAM 6. BOCK DIAGAM USB key MP PAYE MP USB EP A : PHANTOM (CH) OFF ON OEXs WAM HA EV+CHOUS B HA EV+CHOUS EV+DEAY WAM OOM B OOM EV+DEAY EV+DEAY VOCA VOCA EV+DEAY VOCA OW OW OW OW OW STEEO+DEAY PATE STEEO+DEAY PESETS PEAK POWE MUTE OUTPUT BA Bit digital effects MASTE HEADPHONE FX ET PHONES MIC MIC MIC MIC (MP) INE INE INE INE INE OW NOISE PEAMP OW NOISE PEAMP IN OW NOISE PEAMP OW NOISE PEAMP (MONO) FX ETUNS (MIN. OAD Ohms) MIC/INE MIC/INE MIC/INE MIC/INE FX SEND OUT 5/6 CD/TAPE SPK.OUT SPEAKE DAT MIC DAT O TAPE ECODE MIC WIEESS MICOPHONE DIGITA EFFECT UNIT BASS KEYBOAD 6

7 5. INSTAATION AND CONNECTION SPOTIGHT OEXS ing=eturn Signal (Connected together) Sleeve=Ground/Screen To Channel Insert OPTION Tip=Signal To Tape or FX Input PHANTOM (CH) OFF ON OEXs WAM HA EV+CHOUS B HA EV+CHOUS WAM OOM EV+DEAY B OOM Sleeve=Ground/Screen 'Tapped' Connection Direct Output ead (Enables the Insert to be used as a Direct Output while maintaining the channel signal flow) OW OW OW OW OW BA EV+DEAY VOCA EV+DEAY VOCA EV+DEAY VOCA STEEO+DEAY PATE STEEO+DEAY PESETS PEAK POWE MUTE OUTPUT Bit digital effects MASTE FX ET PHONES To Processor Input MIC MIC MIC MIC (MP) INE INE INE INE INE OW NOISE PEAMP OW NOISE PEAMP IN OW NOISE PEAMP OW NOISE PEAMP (MONO) FX ETUNS (MIN. OAD Ohms) MIC/INE MIC/INE MIC/INE MIC/INE FX SEND OUT Tip Sleeve=Ground/Screen Tip=Send Signal 5/6 CD/TAPE SPK.OUT To Channel Insert Sleeve ing ing=eturn Signal MP PAYE MP USB EP A : To Processor Output Option NO. YStereo lead for insert Connection (To be used when the processor does not employ a single jack connection for the In/Out Connections) OFF ON K K K K 6K USB Connection STEEO GAPC Option NO. 5

8 SP OT IG 5. INSTAATION AND CONNECTION. CONTO EEMENTS HT Accessory ist: 5 6 Power cord Customized Speaker Cable MIC F stands (optional) F stands (optional) F stand adaptor (optional) Audio Connections You can connect unbalanced equipment to balanced inputs and outputs. Simply follow these schematics. IEC power cord 7m 5m Sleeve Tip ing ing=ight Signal Tip=eft Signal Strain Clamp Sleeve=Ground/Screen Use for Headphone /" Stereo (TS) Jack Plug Sleeve Tip Tip=Signal Strain Clamp Sleeve=Ground/Screen Use for Mono ine In, Mono /"Jack Plugs OFF /" Mono (TS) Jack Plug OEXs PHANTOM (CH) ON WAM HA B HA EV+CHOUS WAM OOM EV+CHOUS B OOM EV+DEAY VOCA EV+DEAY VOCA EV+DEAY EV+DEAY VOCA STEEO+DEAY OW OW OW OW OW PATE STEEO+DEAY PESETS PEAK POWE OUTPUT MUTE BA Bit digital effects MIC INE MIC INE N OW OISE P E MIC INE N OW OISE P E FX ET N OW OISE P E MASTE MIC PHONES (MP) INE INE N OW OISE P E IN OUT P AM P AM P AM P AM (MONO) FX ETUNS MIC/INE MIC/INE MIC/INE MIC/INE FX SEND 5/6 ing=eturn Signal (MIN. OAD Ohms) CD/TAPE Sleeve SPK.OUT Tip ing Strain Clamp Tip=Send Signal 6 Sleeve=Ground/Screen 5 Use for Insert Points /" Stereo (TS) Jack Plug =Hot(+) 5 =Ground/Screen =Hot(+) =Ground/Screen =Cold() =Cold() Use for Balanced Mic Inputs (For unbalanced use, connect pin to ) Use for Main output (For unbalanced use, leave pin unconnected) pin X Male Plug pin X ine Socket (seen from soldering side) (seen from soldering side)

9 + + + OFF ON K K K K 6K SPOTIGHT. CONTO EEMENTS SPOTIGHT. CONTO EEMENTS 9 BAND selective mode STEEO GAPC Please connect the PIN rowwire on the 9BAND model to the CN9 header on the main mixer board. Then fix the 9BAND model on the mixer panel with two screws. POWE ON/OFF This switch is used to turn the main power on/off. 5 AC SEECT Before connecting the OEXS to the mains supply first check that the Voltage Selector is showing the correct voltage for your country. 6 AC INET This jack is used to connect the unit to the mains with the enclosed power cord. (Depends on applicable country regulators) 5 6 POWE ON OFF AC SEECT CN7 AC INPUT CN9 V~6Hz FUSE: TA 5V V~5/6Hz FUSE: T5A 5V MODUE PHANTOM POWE Switch This button will apply + Volt Phantom Power only to the X MIC input sockets. When condenser microphones are not used, please make sure that the Phantom Power is disengaged. NOTE: When switch on/off the phantom power, please firstly turn the level control knob to min. MONO INPUT CHANNES(CH TO CH) There is CH through CH, which comes with balanced MIC IN and INE IN connectors. Use the X (MIC IN) socket to connect low impedance microphone or low level signal. Use the /" TS (INE IN) jack to connect either a microphone or a line level instrument such as synthesizers, drum machines, effect processors or any other line level signal. NOTE: Never try to connect a linelevel signal to the X MIC input when the phantom power is engaged or you may seriously damage your equipment. STEEO INPUT CHANNE(CH5/6) These are channels 5/6. They are organised in stereopair and provided with /" TS phone sockets. If you connect only the left jack, the input will operate in mono mode, that is the mono signal will appear on both input channels. You can use these inputs with a stereo keyboard, drum machine, etc. PHANTOM (CH) MIC / INE switch When using X socket, please put the switch at the MIC position; When using /'' TS jack, please put the switch at the INE position. OFF ON MP/INE switch Pushing this switch to left will route the signal from MP IN to CH5/6 path, while to right will route the signal from /'' TS jack. 6 CONTO This control is used to adjust the overall level of respective Channel. The adjustable range goes from to db. 6

10 A SPOTIGHT. CONTO EEMENTS SPOTIGHT. CONTO EEMENTS 7 /BA CONTO This is the OAMA control, or balance control. You can adjust the stereo image of the signal via this control. Keep this control in center position and your signal will be positioned in the middle of stage. Turn this control fully counter clockwise and the signal will be present only on the left speaker and viceversa. Of course a large number of intermediate positions is available. control This control is configured as FADE, so the audio signal will be affected by channel level control. Via the FX SEND socket, the AUX signal can be sent to an external effect device. UAIZE Your OEXS features a band equalizer allowing you to adjust the high and low frequencies separately on each mono channel. Both bands provide up to +5dB of boost or cut. 9 GH This is the treble control. You can use it to get rid of high frequency noises or to boost the sound of cymbals or the high harmonics of the human voice. The gain range goes from 5dB to +5dB with a center frequency of khz. OW This is the bass control. It is used to boost male voice or kickdrum and bass guitar. Your system will sound much bigger than what it is. The gain range goes from 5dB to +5dB and the center frequency is Hz. When the player is searching for Mp songs, the interface is as follows: When the player is in pause state, the interface is as follows: ooo When the player is in use, the interface is as follows: MP ooo USB EP NOMA MP USB EP A MP and 9 BAND selective mode section(option) No selective mode U MP US NOMA NOMA NOMA At normal state, there is no selective mode on the front panel, only a piece of panel without any painting and function. But there are two selective modes for what you like, that is MP mode and 9 BAND mode. Please note that on the main mixer board, there is a short circuit rowwire in the CN9 header. S CN7 CN9 JUMPE Mp selective mode MP PAYE MP USB EP A : CN7 MP MODUE CN9 JUMPE SECTION Your OEXS features the special 6preset digital effect, further details please refer to following content. Please connect the 5PIN rowwire on the MP model to the CN7 header on the main mixer board. Put the provided PIN short circuit rowwire in the CN9 header on the main mixer board. Then fix the MP model on the mixer panel with two screws. 7

11 SPOTIGHT. CONTO EEMENTS SPOTIGHT. CONTO EEMENTS 7 USB POT For connecting with USB memory. PEVIOUS In pause state, press this button it will go to the previous song and keep in pause state. In play state, press this button it will go to the previous song and start playing. 9 NEXT In pause state, press this button it will go to the next song and keep in pause state. In play state, press this button, it will go to the next song and start playing. EPEAT Press this button the player will change between the following four modes. EP A means to repeat all songs in the memory, the mark on the screen is all. EP means to repeat one song, the mark on the screen is. Play in order means to play the songs according to the order, the mark on the screen is blank. andom play means to play the songs at random, the mark on the screen is A. PAY/PAUSE In play state, press PAY/PAUSE button to pause the player. In pause state, press PAY/PAUSE button to start playing. STOP In play state, press STOP button to stop playing and the whole quantity of Mp songs in the USB memory will display on the screen. In STOP state, press the PE/NEXT button or press the STOP button again to go to the first songs and the player will keep in pause state, then press down the PAY/PAUSE button to play it. POWE When the unit is off, press this button and hold for about or seconds to turn on the power supply of the player. epeat the above operation, you can turn off the power supply of the player. NOTE: Basic interface instruction. When the player isn't connected to a USB memory equipment, the interface is as follows: PESETS Adjust this knob to select the right effect you wish to perform. There are total 6 options for you: WAM HA,B HA, WAM OOM, B OOM, VOCA, VOCA, VOCA, PATE, STEEO DEAY,STEEO DEAY, EV + DEAY, EV + DEAY, EV + DEAY, EV + DEAY, EV + CHOUS and EV + CHOUS. PEAK/MUTE ED This ED lights up when the input signal is too strong. In case of the digital effect module being muted, this ED also lights up. MUTE SWITCH This switch is used to activate/deactivate the effect facility. POWE ED 7 9 FX ET FX ETUNS FX SEND IN OUT CD/TAPE POWE MASTE PHONES (MIN. OAD Ohms) SPK.OUT OUTPUT When you switch on the apparatus,the ED will light on. 5 MASTE CONTO This control is used to adjust the overall volume of main mix output, and the signal also input to the preamplifier. 6 MASTE ED The segment ED metre is used to indicate the master output level. When the red ED lights on, it means that the MIX OUT reaches db, or start the compressor from the build in AMP. 6 5

12 SPOTIGHT. CONTO EEMENTS SPOTIGHT. CONTO EEMENTS 7 FX TN. Jack Use the stereo phone jack to return the sound of an effect unit to the main mix. You can also use it as a extra auxiliary stereo input. FX ET CONTO This control is used to control the volume of the processed signal sent to Main Mix bus, which can be varied from to db. 9 FX SEND This jack is used to send out the signals from AUX bus. CD/TAPE IN Use the Tape input to connect a CD Player, Tape, DAT, ipod or any other linelevel source. 9 Band section (Optional) 5 Switch Engage this button to add the stereo graphic to the main mix output circuit.it can be used to modify the frequency "contour" of a sound. If you release the button, the stereo graphic will be bypassed. 6 STEEO GAPC Each one of these faders will boost or attenuate (+/ db) the selected frequency at a preset bandwidth. When all the faders are in the center position, the output of the equalizer is flat response K K K K 6K CD/ TAPE CONTO This knob controls the signal sent from CD/TAPE IN,which can be varied from to db. CD/TAPE OUT These CA jacks will route the main mix signal into a tape or DAT recorder. 5 OFF ON STEEO GAPC PHONES This socket will be used to send the signal to a pair of headphones. 6 SPK. OUT The SPEAKE & phone jacks output the main signal from the internal power amplifier and are used to connect speakers. They are internally connected in parallel and output the same signal. Connecting two speakers MP section (Optional) The file system of USB memory for USBMP player is FAT6 and FAT. The player can only decode MP. It can have 7 rank subordinate folders at most, and the maximum quantity of folders within MP files is. In the whole USB memory, the total folders can not beyond 56(incluing those folders without MP songs). 7 9 MP PAYE MP USB EP A : ~ Note: The total impedance of the connected speaker system must be between and ohms. Do not connect anything other than speakers to these jacks. 9