Discussion Chapter#5

Size: px

Start display at page:

Download "Discussion Chapter#5"

Beatrix Chapman
6 years ago
Views:

The Islamic University of Gaza Faculty of Engineering Department of Computer Engineering ECOM 4314: Data Communication Instructor: Dr. Aiman Abu Samra T.A.: Eng. Alaa O.

1 The Islamic University of Gaza Faculty of Engineering Department of Computer Engineering ECOM 4314: Data Communication Instructor: Dr. Aiman Abu Samra T.A.: Eng. Alaa O. Shama Discussion Chapter#5 Main Points in Ch#5 Digital-to-analog conversion It is the process of changing one of the characteristics of an analog signal based on the information in digital data. We have 4 mechanisms for modulating digital data into an analog signal: - Amplitude shift keying (ASK) - Frequency shift keying (FSK) - Phase shift keying (PSK) - Quadrature amplitude modulation (QAM): is the most efficient of these options and is the mechanism commonly used today, it combines changing both the amplitude and phase. 1. Amplitude Shift Keying: In amplitude shift keying, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remain constant while the amplitude changes.

Both peak amplitude and phase remain constant for all signal elements. 3.

2 2. Frequency Shift Keying: In frequency shift keying, the frequency of the carrier signal is varied to represent data. The frequency of the modulated signal is constant for the duration of one signal element, but changes for the next signal element if the data element changes. Both peak amplitude and phase remain constant for all signal elements. 3. Phase Shift Keying: In phase shift keying, the phase of the carrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant as the phase changes. Today, PSK is more common than ASK or FSK. - Quadrature PSK (QPSK) It uses two separate BPSK modulations; one is in-phase, the other quadrature (out-of-phase). In this mechanism we can send 2 bits per signal element (r = 2).

3 4. Quadrature Amplitude Modulation: It uses two carriers, one in-phase and the other quadrature, with different amplitude levels for each carrier. ANALOG-TO-ANALOG CONVERSION (analog modulation) It is the representation of analog information by an analog signal. It can be accomplished in three ways: - Amplitude modulation (AM) - Frequency modulation (FM) - Phase modulation (PM) 1. Amplitude modulation (AM): In AM transmission, the carrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. The frequency and phase of the carrier remain the same; only the amplitude changes to follow variations in the information. The total bandwidth required for AM can be determined from the bandwidth of the audio signal: BAM = 2B 2. Frequency Modulation (FM) In FM transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude) of the modulating signal. The peak amplitude and phase of the carrier signal remain constant, but as the amplitude of the information signal changes, the frequency of the carrier changes correspondingly. The total bandwidth required for FM can be determined from the bandwidth of the audio signal: 3. Phase Modulation (PM) BFM = 2(1 + β) B >> β = 4 In PM transmission, the phase of the carrier signal is modulated to follow the changing voltage level (amplitude) of the modulating signal. The peak amplitude and frequency of the carrier signal remain constant, but as the

4 amplitude of the information signal changes, the phase of the carrier changes correspondingly. The total bandwidth required for PM can be determined from the bandwidth of the audio signal: BPM = 2(1 + β) B Chapter's Questions: P5-1: Calculate the baud rate for the given bit rate and type of modulation. a bps, FSK S= N/r = 2000 baud b bps, ASK S= N/r = 4000 baud c bps, QPSK r = 2 >> S= N/r = 6000/2= 3000 baud d. 36,000 bps, 64-QAM r = log 2 64 =6 >> S= N/r = 36000/6= 6000 baud P5-3: What is the number of bits per baud for the following techniques? a. ASK with four different amplitudes #of bits= log 2 4 = 2 bits b. FSK with eight different frequencies #of bits= log 2 8 = 3 bits

5 c. PSK with four different phases #of bits= log 2 4 = 2 bits d. QAM with a constellation of 128 points #of bits= log = 7 bits P5-7: What is the required bandwidth for the following cases if we need to send 4000 bps? Let d = 1. a. ASK B= (1+d) S = (1+d) N/r = (1+1) 4000= 8000 Hz b. FSK with 2Δf = 4 KHz B= (1+d) S + 2Ϫf = (1+1) = Hz c. QPSK r = 2 B= (1+d) S = (1+d) N/r = (1+1) 4000/2= 4000 Hz d. 16-QAM r = log 2 16 = 4 B= (1+d) S = (1+d) N/r = (1+1) 4000/4= 2000 Hz P5-10: A cable company uses one of the cable TV channels (with a bandwidth of 6 MHz) to provide digital communication for each resident. What is the available data rate for each resident if the company uses a 64-QAM technique? B= 6 MHz r = log 2 64 = 6 Let d = 0 N = 1/(1+d) * r * B = 1 * 6 * 6M = 36 Mbps

6 P5-11: Find the bandwidth for the following situations if we need to modulate a 5-KHz voice. a. AM BAM = 2B = 2* 5K = 10 KHz b. FM ( β = 5 ) BFM = 2 (1+ β) B = 2 (1+5)* 5K = 60 KHz c. PM ( β = 1 ) BPM = 2 (1+ β) B = 2 (1+1)* 5K = 20 KHz

Introduction to Communications Part Two: Physical Layer Ch5: Analog Transmission. Goals of This Class. Warm Up. Outline of the Class

Introduction to Communications Part Two: Physical Layer Ch5: Analog Transmission Kuang Chiu Huang TCM NCKU Spring/2008 2009/4/11 KuangChiu Huang 1 Goals of This Class Through the lecture of analog transmission,