Pre-wired (2 m) 1 output E3NX-FA11 2M E3NX-FA41 2M. Wire-saving Connector 1 output E3NX-FA6 E3NX-FA8

Transcription

1 Smart Fiber Amplifier Units ENX-FA CSM_ENX-FA_DS_E_7_ The Advanced Fiber Amplifier Units That Handles On-site Needs Improved basic performance with.5 times the sensing distance and approx. /0th the minimum sensing object.* Ultra-easy setup with Smart Tuning with a dynamic range expanded 0 times to 0,000:. Optimum stable detection achieved with light level adjustment even for saturated incident light. White on black display characters for high visibility. Solution Viewer that shows the passing time and difference in incident levels and Change Finder that shows even high-speed workpieces8to achieve simple settings and reliable detection. * Compared to the EX-HD. Refer to the Safety Precautions on page. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Ordering Information Fiber Amplifier Units (Dimensions pages and 5) Type Connecting Appearance Inputs/outputs NPN output PNP output Pre-wired ( m) output ENX-FA M ENX-FA M Standard models Wire-saving Connector output ENX-FA6 ENX-FA8 Pre-wired ( m) outputs + input ENX-FA M ENX-FA5 M Advanced models Wire-saving Connector output + input ENX-FA7 ENX-FA9 outputs ENX-FA7TW ENX-FA9TW M8 Connector output + input ENX-FA ENX-FA5 outputs --- ENX-FA5TW for Sensor Communications Unit * Connector for Sensor Communications Unit --- ENX-FA0 * A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.

2 ENX-FA Accessories (Sold Separately) Wire-saving Connectors (Required for models for Wire-saving Connectors.) (Dimensions page 5) Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately. *Protective stickers are provided. Type Appearance Cable length No. of conductors Applicable Fiber Amplifier Units Master Connector EX-CN ENX-FA7 ENX-FA7TW ENX-FA9 Slave Connector EX-CN ENX-FA9TW m Master Connector EX-CN Slave Connector EX-CN ENX-FA6 ENX-FA8 Sensor I/O Connectors (Required for models for M8 Connectors.) (Dimensions page 5) Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately. Size Cable Appearance Cable type m XSF-M-0-A Straight 5m XSF-M-05-A M8 Standard cable -wire m XSF-M-0-A L-shaped 5m XSF-M-05-A Mounting Bracket (Dimensions page 6) A Mounting Bracket is not provided with the Fiber Amplifier Unit. It must be ordered separately as required. Appearance Quantity Related Products Sensor Communications Units Type Appearance E9-L Sensor Communications Unit for EtherCAT ENW-ECT DIN Track (Dimensions page 6) A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required. Appearance Type Quantity Shallow type, total length: m Shallow type, total length: 0.5 m PFP-00N PFP-50N Sensor Communications Unit for CompoNet * Sensor Communications Unit for CC-Link * ENW-CRT ENW-CCL Deep type, total length: m PFP-00N End Plate (Dimensions page 6) Two End Plates are provided with the Sensor Communications Unit. End Plates are not provided with the Fiber Amplifier Unit. They must be ordered separately as required. Appearance Quantity PFP-M Distributed Sensor Unit * ENW-DS *. Refer to your OMRON website for details. *. The Distributed Sensor Unit can be connected to any of the Sensor Communications Units. EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. CompoNet is a registered trademark of the ODVA. CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.

3 ENX-FA Ratings and Specifications Item Type Standard models Advanced models NPN output ENX-FA ENX-FA6 ENX-FA ENX-FA7 ENX-FA7TW ENX-FA --- PNP output ENX-FA ENX-FA8 ENX-FA5 ENX-FA9 ENX-FA9TW ENX-FA5 ENX-FA5TW Connecting Pre-wired Wire-saving Connector Pre-wired Wire-saving Connector M8 Connector for Sensor Communications Unit ENX-FA0 Connector for Sensor Communications Unit Inputs/outputs External inputs --- input input --- input Outputs output outputs output outputs output outputs Light source (wavelength) Red, -element LED (65 nm) Power supply voltage 0 to 0 VDC, including 0% ripple (p-p) At Power Supply Voltage of VDC Standard s or for Sensor Communications Unit: Normal mode: 960 mw max. (Current consumption: 0 ma max.), Power consumption Power saving eco mode: 80 mw max. (Current consumption: 5 ma max.) Advanced s: Normal mode:,080 mw max. (Current consumption: 5 ma max.), Power saving eco mode: 90mW max. (Current consumption: 0 ma max.) Load power supply voltage: 0 VDC max., open-collector output Load current: Groups of to Amplifier Units: 00 ma max., Groups of to 0 Amplifier Units: 0 ma max. Residual voltage: At load current of less than 0 ma: V max. --- At load current of 0 to 00 ma: V max. OFF current: 0. ma max. External inputs --- Refer to. --- Refer to. --- Indicators Protection circuits Response time Sensitivity adjustment No. of Units for mutual interference prevention Functions Super-high-speed mode (SHS) High-speed mode (HS) Standard mode (Stnd) Giga-power mode (GIGA) 7-segment displays (Sub digital display: green, Main digital display: white) Display direction: Switchable between normal and reversed. OUT indicator (orange), L/D indicator (orange), ST indicator (blue), DPC indicator (green), and OUT selection indicator (orange, only on models with outputs) Power supply reverse polarity protection, output short-circuit protection, and output reve rse polarity protection Operate or reset for model with output: 0 μs, with outputs: μs *. Two sensor outputs are allocated in the programmable logic controller PLC I/O table. PLC operation via Communications Unit enables reading detected values and changing settings. *. At Power Supply Voltage of 0 to 0 VDC. Standard s or for Sensor Communications Unit: Normal mode:,080 mw max. (Current consumption: 6 ma max. at 0 VDC, 08 ma max. at 0 VDC) Power saving eco mode: 90 mw max. (Current consumption: ma max. at 0 VDC, 9 ma max. at 0 VDC) Advanced s: Normal mode:,0 mw max. (Current consumption: ma max. at 0 VDC, ma max. at 0 VDC) Power saving eco mode:,050 mw max. (Current consumption: 5 ma max. at 0 VDC, 05 ma max. at 0 VDC) *. The following details apply to the input. NPN PNP *. The mutual interference prevention function is disabled if the detection mode is set to super-high-speed mode. *5. The bank is not reset by the user reset function or saved by the user save function. Power supply reverse polarity protection and output shortcircuit protection Operate or reset: 50 μs Operate or reset: ms Operate or reset: 6 ms Smart Tuning (-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning, or percentage tuning ( 99% to 99%)) or manual adjustment Super-high-speed mode (SHS) 0 High-speed mode (HS) 0 Standard mode (Stnd) 0 Giga-power mode (GIGA) 0 Automatic power control (APC) Always enabled. Dynamic power control (DPC) Provided Timer Select from timer disabled, OFF-delay, ON-delay, one-shot, or ON-delay + OFF-delay timer: to 9,999 ms Zero reset Negative values can be displayed. (Threshold value is shifted.) Resetting settings 5 Select from initial reset (factory defaults) or user reset (saved settings). Contact input (relay or switch) Non-contact input (transistor) Input time ON: Shorted to 0 V (Sourcing current: ma max.). OFF: Open or shorted to Vcc. ON: Shorted to Vcc (Sinking current: ma max.). OFF: Open or shorted to 0 V. ON:.5 V max. (Sourcing current: ma max.) OFF: Vcc.5 V to Vcc (Leakage current: 0. ma max.) ON: Vcc.5 V to Vcc (Sinking current: ma max.) OFF:.5 V max. (Leakage current: 0. ma max.) ON: 9 ms min. OFF: 9 ms min.

4 ENX-FA Item Functions Eco mode Type Standard models Advanced models NPN output ENX-FA ENX-FA6 ENX-FA ENX-FA7 ENX-FA7TW ENX-FA --- PNP output ENX-FA ENX-FA8 ENX-FA5 ENX-FA9 ENX-FA9TW ENX-FA5 ENX-FA5TW Connecting Pre-wired Wiresaving Connector Bank switching Select from banks to. Power tuning Output Ambient illumination Output --- External input --- Pre-wired Wire-saving Connector Select from OFF (digital displays lit) or ECO (digital displays not lit). Select from ON or OFF. Select from normal detection mode or area detection mode. Select from normal detection mode, alarm output mode, or error output mode. --- Select from input OFF, tuning, power tuning, emission OFF, zero reset, or bank switching. Select from normal detection mode, alarm output mode, or error output mode M8 Connector Select from input OFF, tuning, power tuning, emission OFF, zero reset, or bank switching. for Sensor Communications Unit ENX-FA0 Connector for Sensor Communications Unit Select from normal detection mode, alarm output mode, or error output mode. Hysteresis width Select from standard setting or user setting. For a user setting, the hysteresis width can be set from 0 to 9,999. Maximum connectable Units 0 Ambient temperature range Ambient humidity range Insulation resistance Dielectric strength Vibration resistance (destruction) Shock resistance (destruction) Weight (packed state/sensor only) Materials Accessories Case Cover Cable Incandescent lamp: 0,000 lx max., Sunlight: 0,000 lx max. Operating: Groups of or Amplifier Units: 5 to 55 C, Groups of to 0 Amplifier Units: 5 to 50 C, Groups of to 6 Amplifier Units: 5 to 5 C, Groups of 7 to 0 Amplifier Units: 5 to 0 C Storage: 0 to 70 C (with no icing or condensation) Operating and storage: 5% to 85% (with no condensation) 0 MΩ min. (at 500 VDC),000 VAC at 50/60 Hz for min 0 to 55 Hz with a.5-mm double amplitude for hours each in X, Y, and Z directions 500 m/s for times each in X, Y, and Z directions Approx. 5 g/ approx. 75 g Approx. 60g/ approx. 0g Polycarbonate (PC) Polycarbonate (PC) PVC Instruction Manual Approx. 5 g/ approx. 75 g Approx. 60g/approx. 0g Approx. 65 g/ approx. 5 g --- Operating: Groups of or Amplifier Units: 0 to 55 C, Groups of to 0 Amplifier Units: 0 to 50 C, Groups of to 6 Amplifier Units: 0 to 5 C, Groups of 7 to 0 Amplifier Units: 0 to 0 C Storage: 0 to 70 C (with no icing or condensation) 50 m/s for times each in X, Y, and Z directions

5 ENX-FA Distances Threaded s Reflective *. The fiber length is m on each side, so the sensing distance is given as,000 mm. Cylindrical s Reflective Flat s Reflective direction Right-angle Straight Right-angle Straight Sleeve s Throughbeam Throughbeam Throughbeam Throughbeam Reflective Size distance (mm) E-TN M,000,500, E-TR M M E-LT M,000*,000*,000*,080 E-LTR M,000*,000*,50 90 M E-CN M M6 E-CN M, E-DR M M E-C M E-CM M M E-DR M E-DR M, M6 E-CC00 M, E-LD M, E-LDR M, Size distance (mm) direction dia. E-TR M dia. E-TB M, dia. E-TR M,000,500, Side-view E-TLR M, dia. E-DB M dia dia. E-DM M 8 E-DR M dia. E-DB M E-DL M, dia dia. E-D M distance (mm) direction E-T5XR M,000,500, Side-view E-T5YR M, Flat-view E-T5ZR M E-D5XR M, Side-view E-D5YR M Flat-view E-D5ZR M direction Side-view Side-view distance (mm) E-TR M E-TE M E-T M E-T-S M E-TC00BR M,000,500, E-DR M E-D-S M E-DM M 8 E-D M 9 6 E-D M E-D-S 0.5M E-D-S 0.5M E-DC00FR M E-D-S M E-D-S M E-DC00BR M, E-D5-S M

6 ENX-FA Small-spot, Reflective s Type Variable spot Spot diameter Center distance (mm) s Giga mode distance (mm) Standard mode High-speed mode 0. to 0.6 dia. 6 to 5 E-C M + E9-FA Spot diameter of 0. to 0.6 mm at 6 to 5 mm. 0. to.6 dia. 0 to 0 E-C M + E9-F7 Spot diameter of 0. to.6 mm at 0 to 0 mm. Parallel light dia. 0 to 0 Integrated lens Small-spot E-C M + E9-FC E-CN M + E9-FC Spot diameter of mm max. at 0 to 0 mm. 0. dia. 5 E-CS M Spot diameter of 0. mm at 5 mm. 6 dia. 50 E-L5 M Spot diameter of 6 mm at 50 mm. 0. dia. 0.5 dia. 0. dia. 0.5 dia. 7 7 dia. 50 E-C M + E9-FA-5 E-C M + E9-FA-5 E-CN M + E9-FA-5 E-C M + E9-FB E-C M + E9-FB E-CN M + E9-FB E-CC00 M + E9-F8 E-CN M + E9-F8 Spot diameter of 0. mm at 7 mm. Spot diameter of 0.5 mm at 7 mm. Spot diameter of 0. mm at 7 mm. Spot diameter of 0.5 mm at 7 mm. Spot diameter of mm at 50 mm. Super-highspeed mode High-power Beam s Type Through-beam models with integrated lens Through-beam models with lenses Reflective models with integrated lens direction *. The fiber length is 0 m on each side, so the sensing distance is given as 0,000 mm. *. The fiber length is m on each side, so the sensing distance is given as,000 mm. Narrow View s Through-beam Aperture angle s *. The fiber length is m on each side, so the sensing distance is given as,000 mm. Giga mode distance (mm) Standard mode High-speed mode Super-highspeed mode 0 E-T7 0M 0,000* 0,000* 0,000* 8,000 5 E-LT M,000*,000*,000*,080 E-LTR M,000*,000*,50 90 Side-view 0 E-T M,000*,000*,000*,800 Right-angle E-TN M + E9-F,000*,000*,000*,000 6 E-TN M + E9-F6,000*,000*,000*,600 E-TR M + E9-F,000*,000*,000*,000 6 E-TR M + E9-F6,000*,000*,000*,600 Side-view 60 E-TR M + E9-F,70, E-T M + E9-F,000*,000*,000*,860 6 E-T M + E9-F6,000*,000*,000*,000* Side-view 60 E-T M + E9-F,50,980,90 0 E-T5R M + E9-F,000*,000*,000*,500 6 E-T5R M + E9-F6,000*,000*,000*,000* Side-view 60 E-T5R M + E9-F,00, E-T8R-S M + E9-F,000*,000*,000*,000 6 E-T8R-S M + E9-F6,000*,000*,000*,800 Side-view 60 E-T8R-S M + E9-F, E-T6-S M + E9-F,000*,000*,000*,800 6 E-T6-S M + E9-F6,000*,000*,000*,00 Side-view 60 E-T6-S M + E9-F,50, E-T5 M + E9-F-,000*,000*,50,00 6 E-T5 M + E9-F6,000*,000*,000*,000* E-D6 M 0 to,000 * 0 to,00 0 to,50 0 to 80 direction Side-view Aperture angle.5 E-A0 M E-A0- M s Giga mode distance (mm) Standard mode High-speed mode Super-highspeed mode,000*,670, E-A0 M,90, E-TSR M,000*,00, E-TS M,000*,900, E-TS M,000*,000*,750,000 6

7 ENX-FA s for Detection without Background Interference distance (mm) direction E-L6-N M 0 to 5 0 to Flat-view E-LS M 0 to Side-view E-L5L M 5. to 9 (center 7.) Transparent Object Detection (Retro-reflective s) Retro-reflective Feature Size s Film detection M E-C M + E9-FR + E9-RP7 distance (mm) Square --- E-R6 5M 50 to,50 50 to,500 Threaded M6 E-R M 0 to 70 0 to 50 Transparent Object Detection (Limited-reflective s) Limitedreflective Limitedreflective distance (mm) Feature direction Small size E-LS M 0 to Standard E-L6-N M 0 to 5 0 to Glass substrate Flat-view alignment, 70 C E-A08 M 0 to Standard/long-distance E-A M to Side-view form Side-view E-L5L M 5. to 9 (center 7.) Glass substrate mapping, 70 C E-A09 M 5 to Chemical-resistant, Oil-resistant s Through-beam Reflective *. The fiber length is m on each side, so the sensing distance is given as,000 mm. *. Even if there is no sensing object, the Sensor will detect light that is reflected by the fluororesin. Bending-resistant s Type direction distance (mm) Oil-resistant Right-angle E-TNF M,000*,000*,000*,00 Chemical/oil-resistant Chemical/oil-resistant at 50 C Semiconductors: Cleaning, developing, and etching; 60 C Semiconductors: Resist stripping; 85 C E-TF M,000*,000*,000*,600 E-TF M,000*,000*,900,000 Side-view E-TF M,00, E-T5F M,000*,000*, E-LFP 5M E-LFS 5M 8 to 0 mm from tip of lens (Recommended sensing distance: mm), 9 to mm from center of mounting hole A (Recommended sensing distance: mm) 8 to 0 mm from tip of lens (Recommended sensing distance: mm), to mm from center of mounting hole A (Recommended sensing distance: 5 mm) Chemical/oil-resistant E-DF M ---* Chemical-resistant cable E-DU M, Through-beam Reflective distance (mm) Size.5 dia. E-TB M, M E-T M M E-T M,750,00,50 60 Square -T5XB M dia. E-DB M M E-D M dia. E-DB M M E-DB M M6 E-D M, Square E-D5XB M

8 ENX-FA Heat-resistant s Through-beam Reflective Heat-resistant temperature *. The fiber length is m on each side, so the sensing distance is given as,000 mm. Area Detection s Through-beam *. The fiber length is m on each side, so the sensing distance is given as,000 mm. Liquid-level Detection s distance (mm) 00 C E-T5R M,00, C E-T5 M,000*,50, C E-T8R-S M, C E-T6-S M,50, C E-D5R M, C E-D5 M, C E-D8R-S M C 50 C E-A08H M 0 to E-A09H M 0 to 0 (center 5) --- E-D6-S M E-D6-S M C E-D7-S M Type width Area mm distance (mm) E-T6PR M,000*,550,680 0 E-T6JR M,000*,50, mm E-T6WR M,000*,900, Reflective Array mm E-D6P M, Tube-mounting Liquid contact (heat-resistant up to 00 C) Tube diameter Feature., 6., or 9.5 dia 8 to 0 dia Stable residual quantity detection Mounting at multiple levels E-A0 5M E-L5T M distance (mm) Applicable tube: Transparent tube with a diameter of., 6., or 9.5 mm, Recommended wall thickness: mm Applicable tube: Transparent tube with a diameter of 8 to 0 mm, Recommended wall thickness: mm No restrictions Large tubes E-D6T 5M Applicable tube: Transparent tube (no restrictions on diameter) E-D8F M Liquid-contact type Vacuum-resistant s Through-beam distance (mm) Heat-resistant temperature E-T5V M, C E-T5V M + E9- FV,000*,000*,000* C E-T8SV M,000*, *. The fiber length is m on each side, so the sensing distance is given as,000 mm. s for FPD, Semiconductors, and Solar Cells Limitedreflective Application Operating temperature Glass presence detection 70 C Glass substrate alignment Glass substrate mapping Wet processes: Cleaning, Resist developing and etching Wet process: Resist stripping *. The fiber length is m on each side, so the sensing distance is given as,000 mm. distance (mm) E-L6-N M 0 to 5 0 to E-A08 M 0 to C E-A08H M E-A M to C E-A09 M 5 to C E-A09H M 0 to 0 (center 5) C E-LFP 5M 8 to 0 mm from tip of lens (Recommended sensing distance: mm), 9 to mm from center of mounting hole A (Recommended sensing distance: mm) 85 C E-LFS 5M 8 to 0 mm from tip of lens (Recommended sensing distance: mm), to mm from center of mounting hole A (Recommended sensing distance: 5 mm) E-A0 M E-A0- M,000*,670, Through-beam Wafer mapping 70 C E-A0 M,90, E-TSR M,000*,00, E-TS M,000*,900,

9 I/O Circuit Diagrams NPN Output Operation mode Timing chart L/D indicator Output circuit ENX-FA ENX-FA ENX-FA6 Light-ON Dark-ON Incident light No incident light (Between brown and black leads) Incident light No incident light (Between brown and black leads) L D Display OUT indicator (orange) Photoelectric sensor main circuit Load Black Blue 0 to 0 VDC ENX-FA Light-ON Dark-ON ch/ Incident light ch No incident light (Between brown and black (orange) leads) ch/ Incident light ch No incident light (Between brown and black (orange) leads) L D Display OUT indicator (orange) Photoelectric sensor main circuit OUT indicator (orange) Load Black Load Orange ch Pink ch External Blue input 0 to 0 VDC ENX-FA7 ENX-FA Light-ON Dark-ON Incident light No incident light (Between brown and black leads) Incident light No incident light (Between brown and black leads) L D Display OUT indicator (orange) Photoelectric sensor main circuit M8 Connector Pin Arrangement Load Black Orange Blue External input 0 to 0 VDC ENX-FA7TW Light-ON Dark-ON ch/ Incident light ch No incident light (Between brown and black (orange) leads) ch/ Incident light ch No incident light (Between brown and black (orange) leads) L D Display OUT indicator (orange) Photoelectric sensor main circuit OUT indicator (orange) Load Black Load Orange ch ch Blue 0 to 0 VDC 9

10 ENX-FA PNP Output Operation mode Timing chart L/D indicator Output circuit ENX-FA ENX-FA8 Light-ON Dark-ON Incident light No incident light (Between blue and black leads) Incident light No incident light (Between blue and black leads) L D OUT indicator (orange) Display Photoelectric sensor main circuit Control Black output Load Blue 0 to 0 VDC ENX-FA5 Light-ON Dark-ON ch/ Incident light ch No incident light (Between blue and black (orange) leads) ch/ Incident light ch No incident light Outputs ON (Between blue and black (orange) leads) L D Display OUT indicator (orange) OUT indicator (orange) Photoelectric sensor main circuit External Pink input Black ch Orange ch Load Load Blue 0 to 0 VDC ENX-FA9 ENX-FA5 Light-ON Dark-ON Incident light No incident light (Between blue and black leads) Incident light No incident light (Between blue and black leads) L D OUT indicator (orange) Display Photoelectric sensor main circuit M8 Connector Pin Arrangement External Orange input Control Black output Load Blue 0 to 0 VDC ENX-FA9TW ENX-FA5TW Light-ON Dark-ON ch/ Incident light ch No incident light (Between blue and black (orange) leads) ch/ Incident light ch No incident light Outputs ON (Between blue and black (orange) leads) L D Display OUT indicator (orange) OUT indicator (orange) Photoelectric sensor main circuit M8 Connector Pin Arrangement Black ch Orange ch Load Load Blue 0 to 0 VDC Plug (Sensor I/O Connector) Terminal number XSF-M-0-A XSF-M-05-A XSF-M-0-A XSF-M-05-A Wire color White Blue Black Wire color Connection pin Application Power supply (+V) White External input / Output Blue Power supply (0 V) Black Output 0

11 Nomenclature ENX-FA/FA/FA6/FA8/FA7/FA9/FA/FA5 ENX-FA [L/D Indicator] Indicates the setting status: Light-ON or Dark-ON. [OUT Indicator] Turns ON when the output is ON. [DPC Indicator] Turns ON when Dynamic Power Control is effective. [ST Indicator] Turns ON when Smart Tuning is in progress. [ L/D Button] Use to switch between Light-ON and Dark-ON. [ Tune Button] Threshold Level Green digital display Executes Smart Tuning. Incident Level White digital display [ MODE Button] Use to switch between Detection Mode and Setting Mode. [±UP/DOWN Button] Used to fine-tune the threshold or change set values. ENX-FA/FA5/FA7TW/FA9TW/FA5TW/FA0 [L/D Indicator] Indicates the setting status: Light-ON or Dark-ON. [OUT Indicator/OUT Indicator] Turns ON when OUT or OUT is ON. [DPC Indicator] Turns ON when Dynamic Power Control is effective. [ST Indicator] Turns ON when Smart Tuning is in progress. [ L/D Button] Use to switch between Light-ON and Dark-ON. [ Tune Button] Executes Smart Tuning. Threshold Level Green digital display [OUT Selection Indicator/OUT Selection Indicator] The indicator for the selected output channel is Incident Level White digital display [ MODE Button] Use to switch between Detection Mode and Setting Mode, and use to switch between OUT and OUT. [±UP/DOWN Button] Used to fine-tune the threshold or change set values.

12 Safety Precautions ENX-FA To ensure safe operation, be sure to read and follow the Instruction Manual provided with the Sensor. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Do not use the product with voltage in excess of the rated voltage. Excess voltage may result in malfunction or fire. Never use the product with an AC power supply. Otherwise, explosion may result. Precautions for Correct Use. Connect the load correctly.. Do not miswire such as the polarity of the power supply.. Be sure to mount the unit to the DIN track until it clicks.. When using the Amplifier Units with Wire-saving Connectors, attach the protective stickers (provided with EX-CN-series Connectors) on the unused power pins to prevent electrical shock and short circuiting. When using Amplifier Units with Connectors for Communications Units, attach the protective caps. Amplifier Unit with Wiresaving Connector Amplifier Unit with Connector for Communications Unit Precautions for Safe Use The following precautions must be observed to ensure safe operation of the Amplifier Unit. Doing so may cause damage or fire.. Do not install the product in the following locations. Locations subject to direct sunlight Locations subject to condensation due to high humidity Locations subject to corrosive gas Locations subject to vibration or mechanical shocks exceeding the rated values Locations subject to exposure to water, oil, chemicals Locations subject to stream Locations subjected to strong magnetic field or electric field. Do not use the product in environments subject to flammable or explosive gases.. Do not use the product in any atmosphere or environment that exceeds the ratings.. To secure the safety of operation and maintenance, do not install the product close to high-voltage devices and power devices. 5. High-voltage lines and power lines must be wired separately from the product. Wiring them together or placing them in the same duct may cause induction, resulting in malfunction or damage. 6. Do not apply any load exceeding the ratings. Otherwise, damage or fire may result. 7. Do not short the load. Otherwise, damage or fire may result. 8. Do not use the product if the case is damaged. 9. Burn injury may occur. The product surface temperature rises depending on application conditions, such as the ambient temperature and the power supply voltage. Use caution when operating or cleaning the product. 0.When setting the sensor, be sure to check safety such as by stopping the equipment..be sure to turn off the power supply before connecting or disconnecting wires..do not attempt to disassemble, repair, or modify the product in any way..when disposing of the product, treat it as industrial waste. Protective sticker Power supply connecting terminals Protective cap 5. Use an extension cable with a minimum thickness of 0. mm and less than 00 m long. 6. Do not apply the forces on the cord exceeding the following limits: Pull: 0N; torque: 0.N m; pressure: 0N; bending: 9.N 7. Do not apply excessive force (9.8 N max.) such as tension, compression or torsion to the Amplifier Unit with the Fiber Unit fixed to the Amplifier Unit. 8. Always keep the protective cover in place when using the Amplifier Unit. Not doing so may cause malfunction. 9. It may take time until the received light intensity and measured value become stable immediately after the power is turned on depending on use environment. 0.The product is ready to operate 00 ms after the power supply is turned ON..The Mobile Console EX-MC, EX-MC-SV and EX-MC- S cannot be connected..the mutual interference prevention function does not work when in combination with EC/EC/EX..If the unit receives excessive sensor light, the mutual interference prevention function may not work properly, resulting in malfunction of the unit. In such case, increase the threshold..standard models and Advanced models The Sensor Communication Unit EX-DRT-S, EX-CRT, EX- ECT and ENW cannot be connected. for Sensor Communication Unit (ENC-FA0) The Sensor Communication Unit ENW can be connected. EX-DRT-S, EX-CRT, EX-ECT cannot be connected. 5.If you notice an abnormal condition such as a strange odor, extreme heating of the unit, or smoke immediately stop using the product, turn off the power, and consult your dealer. 6.Do not use thinner, benzene, acetone, and lamp oil for cleaning.

13 Dimensions Fiber Amplifier Units ENX-FA (Unit: mm) Tolerance class IT6 applies to dimensions in this data sheet unless otherwise specified. Pre-wired Amplifier Units ENX-FA ENX-FA ENX-FA ENX-FA5 ENX-FA/FA L/D indicator DPC indicator ST indicator.7 7. OUT selection indicator OUT indicator OUT indicator ENX-FA/FA5 7.8 L/D indicator DPC indicator ST indicator *Cable Specifications Outer No. of Others diameter conductors ENX-FA.0 dia. Conductor cross-section: 0. mm ENX-FA Insulator dia.: 0.9 mm ENX-FA Standard cable length: m.0 dia. 5 ENX-FA5 Minimum bending radius: mm 0 OUT indicator 5. Threshold level (green, digital) Incident level (white, digital) Mounted to DIN Track OUT selection indicator Threshold level (green, digital) 7. (max. value with cover open) 70 (max. value with cover open) Incident level (white, digital) 5. With Mounting Bracket Attached (max. value with cover open).5 Two,.-dia. fiber unit holes (7).5 (9) *.7 (7).5 (9) * Fiber Attachment (E9-F9) attached 0.5 (7.9) 7.8 (0.5) Optical communications Two,. dia. (mounting holes) 0.5 (9.) 6. Optical communications E9-L Mounting Bracket (sold separately, SUS0) PFP-@N DIN Track (sold separately) Mounting Holes. Two, M holes 6 (9.9) 6 Amplifier Units with Wire-saving Connectors ENX-FA6 ENX-FA7 ENX-FA7TW ENX-FA6/FA7/FA8/FA9 ENX-FA8 DPC indicator ENX-FA9 ENX-FA9TW L/D indicator.7 7. OUT indicator Threshold level (green, digital) ST indicator Incident level (white, digital) OUT selection indicator OUT indicator OUT indicator OUT selection indicator Threshold level (green, digital) ENX-FA7TW/FA9TW 7.8 L/D indicator DPC indicator ST indicator Incident level (white, digital) *Cable Specifications Outer diameter No. of conductors EX-CN.6 dia. EX-CN EX-CN.0 dia. EX-CN 0 Mounted to DIN Track With Mounting Bracket Attached (max. value with cover open) 70 (max. value with cover open) 5. (75.) 0.8 (max. value with cover open).5 Two,.-dia. fiber unit holes (7).5 (9) * () (7).5 (9) * () 5.7 With Fiber Attachment (E9-F9) attached 0.5 (7.9) () (75.) PFP-@N DIN Track (sold separately) Optical communications Wire-saving Connector (sold separately) Two,. dia. (mounting holes) 0.5 (9.) 6.. Wire-saving Connect (sold separately) Optical communications E9-L Mounting Bracket (sold separately, SUS0) Mounting Holes Two, M holes (9.9) 6 6

14 ENX-FA Amplifier Units with M8 Connectors ENX-FA ENX-FA5 ENX-FA5TW ENX-FA/FA5 L/D indicator DPC indicator ST indicator OUT selection indicator OUT indicator ENX-FA5TW 7.8 L/D indicator DPC indicator ST indicator Connector pin arrangement 6.9 OUT indicator OUT indicator Threshold level (green, digital) 5. Incident level (white, digital) OUT selection indicator Threshold level (green, digital) Incident level (white, digital) 0 5. Mounted to DIN Track 7. (max. value with cover open) 70 (max. value with cover open) With Mounting Bracket Attached (max. value with cover open).5 Two,.-dia. fiber unit holes.5 (5.7) PFP-@N DIN Track (sold separately) 0.5 Optical communications M8 Connector 0.5 (9.) Two,. dia. 7.9 (mounting holes) E9-L Mounting Bracket (sold separately, SUS0) Mounting Holes Two, M holes Amplifier Unit with Connector for Sensor Communications Unit ENX-FA0 OUT selection indicator L/D indicator DPC indicator OUT indicator 7.8 ST indicator OUT indicator OUT selection indicator Threshold level (green, digital) 5. Incident level (white, digital) Mounted to DIN Track 0 (max. value with cover open) 5 (max. value with cover open) 0.8 (max. value with cover open).5 Two,.-dia. fiber unit holes.5 (7) (9) 6 (9.9) 5.7 With Fiber Attachment (E9-F9) attached 0.5 (7.9) PFP-@N DIN Track (sold separately) 90.8 (9.5) Optical communications

15 ENX-FA Accessories (Sold Separately) Wire-saving Connectors Master Connector EX-CN EX-CN Edge of Amplifier Unit (7), * * EX-CN: -dia. cable with conductors, Standard cable length: m (Conductor cross-section: 0. mm (AWG), Insulator diameter:. mm) EX-CN: -dia. cable with conductors, Standard cable length: m (Conductor cross-section: 0. mm (AWG), Insulator diameter:. mm) Slave Connector EX-CN EX-CN Edge of Amplifier Unit (7), * * EX-CN:.6-dia. cable with conductor, Standard cable length: m (Conductor cross-section: 0. mm (AWG), Insulator diameter:. mm) EX-CN: -dia. cable with conductors, Standard cable length: m (Conductor cross-section: 0. mm (AWG), Insulator diameter:. mm) Sensor I/O Connectors Straight XSF-M-0@-A L-shaped XSF-M-0@-A 5

16 ENX-FA Mounting Bracket E9-L (0.) Mounting Holes Two, M holes dia. holes 7 6±0. 6 Four, Radius: max. 7 Material: Stainless steel (SUS0) DIN Track PFP-00N PFP-50N.5 7.±0.5 5±0. 7± (5)* 0 0,000 (500)* *Dimensions in parentheses are for the PFP-50N. Material: Aluminum PFP-00N 6.5 5± ,000 Material: Aluminum End Plate PFP-M.5 50 M 8 panhead screw 0 M spring washer Materials: Iron, zinc plating

17 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation 0 All Right Reserved.